YOUR PARTNERS WITH SOLUTIONS

Do you have these types of projects?

Retaining Walls

Excavation for Basements

Infrastructure Excavation

No Room for Caisson Placement

Added Support for Grade Beams or Footings

We Have The Solutions

CON-TECH Systems

CTS/TITAN IBO

• Soil Anchors

• Micropiles

• Soil Nails

IINJECTION-NJECTION-BOBORED MICRO PILESRED MICRO PILES

CTS/TITAN IBO SystemCTS/TITAN IBO System

Hollow Bar with external thread.

The Drill BitDrill Bit selected to meet soil conditions has Venturi grout exit holes.

Optional CentralizerCentralizer centers the bar inside the bore hole.

The CouplerCoupler connects the hollow bars.

Self locking Thread (Pitch < 6°).

Special Approved Fine-Grain Steel

The hollow bar:The hollow bar:

CTS/TITAN IBO

Bearing Plate

HDPE tube for free length

or additional corrosion

protection in the area of

Soil quality and friction

Sphencal collar nut

Soil cement grout body

Final injection grout

CTS/TITAN hollow bar thread deformations to ASTM-A 615 to limit Cracks widths in grout

CTS/TITAN hollow bar, allows grout injection boring

Coupler

Circular spacer to achieve grout cover >3/4” allows grout passage

Drill Bit

Flushing holes or jets

Cross-section of exhumened grout bodyCross-section of exhumened grout body

Densified Ground

Soil / Cement Mix

Neat Cement Grout

Hollow TITAN Bar

• Equipment, Material & Installation Specification• For Self-Drilling Dynamic Grouted• TITAN Soil-Nails and Micro-Piles

• 1.0 Scope

• TITAN Hollow Bars are 3 meters long (IBO)

• Continuously threaded, can be cut at any length

• TITAN thread conforms to the requirements of reinforcing steel and exceeds the requirements of

• ASTM A-615 GRADE 75

Specifications:Specifications:

Many Applications Anchor Soil Nail Pile Rock Bolt

Drill BitsDrill Bits

Clay Bit:

Carbide Bit:

Button Bit:

Carbide Step Bit

Carbide Button Bit

Cross Cut Bit:

Clay, sand-mixed Ground without Boulders < 50 S.P.T

For controlled directional drilling (tolerance < 2% of the length)

Dolomit, Granite, Sandstone; strength 70-150 MPa

Weathered Rock, Phylit, Slate, Shale; strength < 70 MPa

Reinforced Concrete or Rock, strength > 70 MPa

Dense Sand with Gravel and small Boulders > 50 S.P.T

System-PartsSystem-Parts

Drill Bit

Hollow Titan Bar

Centralizer

Coupling

Bearing Plate

Hex Nut

Pipe Sleeve

• Adaptable to any load situation

• Short installation time• Small equipment for

installation• For tension and compression

or combined loads

Advantages of simultaneously drilled and grouted TITAN anchor piles:

Soil Nail

Titan IBO Soil Nails

• The making of the wall. • Nailed and cased, (right) • Shotcrete stabilized, (below).

Micro-Piles

Footers or grade beams

Anchors for transmission towers

Guy Wire Anchors

Guy Wire Anchors

Drill mounted on bob cat

Hollow core drill shaft with rock bit

Instructions on the drills remote controls

Drilling with air

YOUR PARTNERS WITH SOLUTIONS

• TITAN INJECTION-BORED MICOR PILES & SOIL NAILS

• RAM JACK HELICAL AND HYDRAULIC PIERS

• HJ3 CARBON FIBER WRAPS

• PREASURE GROUTING

• MUDJACKING

• NEGATIVE SIDE CONCRETE WATERPROOFING

• CONCRETE REPAIR AND RESTORATION

Arizona Ram Jack, LLCArizona Ram Jack, LLC

Questions?

Arizona Repair Masons, Inc.