metso magnetic separation
TRANSCRIPT
-
Low Intensity
Magnetic Separation
LIMS
Andrew Wilkinson
Metso TR Seminar
27 April 2012
-
Metso 3
Range of Metso LIMS Models
Dry Cobbers with belt, models BSS1200 and BSA1200,
for coarse material, up to 300 mm
Dry drum with dust housing, model DS900 and DS1200
for processing, 0-20 mm material
Wet Cobbers, WS1200CC and WS1200CR series
Wet finishers, WS1200CTC series
Froth separator, WS1200DWHG series
Dense Media Recovery WS1200DM and WS1200 CR
series
-
Metso 4
LIMS basic data
Drum diameters 916 (dry drum only) and 1200 mm
Drum lengths from 600 to 3600 mm
Magnetic ratings
- High capacity 120 mT at 50 mm
- High gradient 120 mT at 15 mm
Capacity 5 up to 150 t/h per meter drum length
depending on application and ore characteristics
-
Metso 6
LIMS Principles of magnetic separators
Stationary magnetic system and revolving outer
drum
Magnets provide alternating polarization
Revolving on drum surface improves cleaning of
collected material
Drum transports magnetics to discharge weir
Non-magnetics is discharged through discharge
spigots, ports or slots
-
Metso 7
LIMS Principles of magnetic separators
Magnetic drum made in non-magnetic material
Tank made in non-magnetic stainless steel with
rubber lining in wear zones
Drive system with high efficiency, high availability,
(gearbox-motor) direct drive
Easily adjustable machine parameters such as
gaps, pulp level and magnet setting)
-
Metso 9
Principle of Magnetic Separator
-
Metso 12
Magnetic Separator
-
Metso 13
Magnetic Separator, wet
-
Metso 14
Magnetic Separation Dry LIMS type drum
-
Metso 15
Magnetic Separator, dry
-
Metso 16
Magnetic separator Yoke - assembly
-
Metso 17
LIMS
WS1200
series
Drive arrangement
-
Metso 18
LIMS
WS1200 series
Adjustable concentrate
overflow weir
-
Metso 19
LIMS
WS1200
series
Magnet angle adjustment
-
Metso 20
LIMS
WS1200 series
WS1230DM in special
steel against corrosion
-
Metso 23
LIMS
View of Cleaner
Separation Stage at LKAB,
Kiruna.
A total of 164 off WS1200
series are installed in LKAB
concentrators