metallurgical and materials engineeringciencias.uis.edu.co/imrmpt/resumenes/conferencias... ·...
TRANSCRIPT
Federal University
of Rio de Janeiro
UFRJ
Federal University
of Rio de Janeiro
UFRJ
Metallurgical and Materials Engineering
Metallurgical and Materials Engineering
Metallurgical and Materials Engineering
Metallurgical and Materials Engineering
Graduate Courses
•Master of Science
Graduate Courses
•Master of Science
Undergraduate Courses
•Metallurgical Engineering
•Materials Engineering
Undergraduate Courses
•Metallurgical Engineering
•Materials Engineering
•Doctor of Science•Doctor of Science
Metallurgical and
Materials Engineering
Metallurgical and
Materials Engineering
Chairman: Achilles Junqueira Bourdot Dutra
Vice-chairman: Dilson Silva dos Santos
Graduate academic coordinator: Luiz Henrique de Almeida
Undergraduate academic coordinator: Renata Antoun Simão
Chairman: Achilles Junqueira Bourdot Dutra
Vice-chairman: Dilson Silva dos Santos
Graduate academic coordinator: Luiz Henrique de Almeida
Undergraduate academic coordinator: Renata Antoun Simão
25 faculty
33 staff
25 faculty
33 staff
Metallurgical and Materials Engineering
Metallurgical and Materials Engineering
Graduate and Undergraduate Teaching
Research & Development
Inter-institutional Cooperation
Technological Projects
Technical Consultancy
Graduate and Undergraduate Teaching
Research & Development
Inter-institutional Cooperation
Technological Projects
Technical Consultancy
Metallurgical and Materials EngineeringMetallurgical and Materials Engineering
Staff
1. Achilles Junqueira Bourdot Dutra, D.Sc.– 1989
2. Celio Albano da Costa Neto, Ph.D. - 1996
3. Dilson Silva dos Santos, D.Sc. - 1996
4. Enrique Mariano Castrodeza, D.Sc. - 2002
5. Ericksson Rocha e Almendra, D.Sc. - 1990
6. Fernando Luiz Bastian, Ph.D. - 1978
7. Gabriela Ribeiro Pereira, D.Sc. – 2010
8. Giselle de Mattos Araujo, M.Sc. - 2008
9. Gloria Dulce de Almeida Soares, D.Sc. - 1990
10. Isabel Cristina Pereira Margarit Mattos, D.Sc. - 1997
11. João da Cruz Payão Filho, Dr.Ing. - 1988
Professor Emeritus
Walter Arno Mannheimer, Ph.D. – 1967
Collaborators
José Farias de Oliveira, D.Sc. - 1986
Julio Carlos Afonso, D.Sc. - 1990
Maria Cecilia de Souza Nobrega, D.Sc. – 199011. João da Cruz Payão Filho, Dr.Ing. - 1988
12. João Marcos Alcoforado Rebello, Dr. - 1975
13. Jose Antonio da C. Ponciano Gomes, D.Sc. – 1991
14. Jose da Rocha Miranda Pontes, D.Sc. – 1994
15. Juan Carlos Garcia de Blas, Dr.Ing. - 1984
16. Luis Marcelo Marques Tavares, Ph.D. - 1997
17. Luiz Carlos Pereira, D.Sc. - 1994
18. Luiz Henrique de Almeida, D.Sc. - 1985
19. Marysilvia Ferreira da Costa, D.Sc. - 1994
20. Oscar Rosa Mattos, Dr. - 1981
21. Paula Mendes Jardim, D.Sc. - 2001
22. Paulo Emilio Valadão de Miranda, D.Sc. - 1987
23. Renata Antoun Simão, D.Sc.- 1995
24. Rossana Mara da Silva Moreira Thiré, D.Sc. - 2003
25. Sergio Alvaro de S. Camargo Junior, D.Sc. – 1987
Maria Cecilia de Souza Nobrega, D.Sc. – 1990
Oswaldo Esteves Barcia, D.Sc. - 1991
Rupen Adamian, Dr. - 1970
Major Research Areas
• Advanced Ceramics
• Biomaterials
• Corrosion
• Extractive Metallurgy - Mineral and Environmental Technology
Major Research Areas
• Advanced Ceramics
• Biomaterials
• Corrosion
• Extractive Metallurgy - Mineral and Environmental Technology
Metallurgical and Materials EngineeringMetallurgical and Materials Engineering
• Physical Metallurgy and Mechanical Properties
• Surfaces and Thin Films
• Thermomechanical Processing and Microstructure Engineering
• Welding and Non-destructive Testing
• Composite Materials
• Polymeric materials
• Physical Metallurgy and Mechanical Properties
• Surfaces and Thin Films
• Thermomechanical Processing and Microstructure Engineering
• Welding and Non-destructive Testing
• Composite Materials
• Polymeric materials
Academic accomplishments (up to 2011)Academic accomplishments (up to 2011)
Metallurgical and Materials Engineering
Metallurgical and Materials Engineering
• More than 720 engineers graduated
• 702 M.Sc. dissertations
• 243 D.Sc. thesis
• 175 graduate students in 2011.
• More than 720 engineers graduated
• 702 M.Sc. dissertations
• 243 D.Sc. thesis
• 175 graduate students in 2011.
Major Research Areas
• Advanced Ceramics
• Biomaterials
• Corrosion
• Extractive Metallurgy - Mineral and Environmental Technology
Major Research Areas
• Advanced Ceramics
• Biomaterials
• Corrosion
• Extractive Metallurgy - Mineral and Environmental Technology
Metallurgical and Materials EngineeringMetallurgical and Materials Engineering
• Physical Metallurgy and Mechanical Properties
• Surfaces and Thin Films
• Thermomechanical Processing and Microstructure Engineering
• Welding and Non-destructive Testing
• Composite Materials
• Polymeric materials
• Physical Metallurgy and Mechanical Properties
• Surfaces and Thin Films
• Thermomechanical Processing and Microstructure Engineering
• Welding and Non-destructive Testing
• Composite Materials
• Polymeric materials
FacilitiesFacilities
LNDC
Metallurgical
and Materials
Engineering
Interaction with Industry:
• Development of innovator products (Hydrogen hybrid bus, Nb based coatings, Corrosion inhibitors, etc.)
• Cooperation with companies located in the UFRJ’s campus and Technology park (Petrobrás/CENPS, Usiminas, TenarisConfab, GE, Siemens, etc.)
Interaction with Industry:
• Development of innovator products (Hydrogen hybrid bus, Nb based coatings, Corrosion inhibitors, etc.)
• Cooperation with companies located in the UFRJ’s campus and Technology park (Petrobrás/CENPS, Usiminas, TenarisConfab, GE, Siemens, etc.)
Metallurgical and Materials EngineeringMetallurgical and Materials Engineering
• Laboratories constructed with companies’ support
(LNDC - Petrobrás, DEMAT – INB/Petrobrás)
• Agreement with companies aiming at HR formation (TKS-CSA, Usiminas, etc.)
• Research and services contracts with several companies (Petrobrás, Tenaris, Usiminas, etc.)
• Laboratories constructed with companies’ support
(LNDC - Petrobrás, DEMAT – INB/Petrobrás)
• Agreement with companies aiming at HR formation (TKS-CSA, Usiminas, etc.)
• Research and services contracts with several companies (Petrobrás, Tenaris, Usiminas, etc.)
Laboratories
•Laboratory of Stress analysis
•Laboratory of Ceramic Processing
•Laboratory of Chemical Analysis
Laboratories
•Laboratory of Stress analysis
•Laboratory of Ceramic Processing
•Laboratory of Chemical Analysis
Metallurgical and Materials EngineeringMetallurgical and Materials Engineering
•Laboratory of Chemical Analysis
•Laboratory of Biomaterials
•Laboratory of Atomic Force Microscopy (AFM)
•Laboratory of Surfaces Characterization
•Laboratory of Composite Materials
•Laboratory of Chemical Analysis
•Laboratory of Biomaterials
•Laboratory of Atomic Force Microscopy (AFM)
•Laboratory of Surfaces Characterization
•Laboratory of Composite Materials
Laboratories
•Laboratory of Materials Characterization – X-ray difr., IR. TF, BET, TG/DSC, etc.)
•Hydrogen Laboratory
•Laboratory of Applied Electrochemistry
Laboratories
•Laboratory of Materials Characterization – X-ray difr., IR. TF, BET, TG/DSC, etc.)
•Hydrogen Laboratory
•Laboratory of Applied Electrochemistry
Metallurgical and Materials EngineeringMetallurgical and Materials Engineering
•Laboratory of Mineral Technology
•Laboratory of Mechanical Properties
•Laboratory of Polymeric Materials
•Laboratory of Thermo-mechanical Processing
•Laboratory of Interfaces Chemistry and Colloidal Systems
•Laboratory of Mineral Technology
•Laboratory of Mechanical Properties
•Laboratory of Polymeric Materials
•Laboratory of Thermo-mechanical Processing
•Laboratory of Interfaces Chemistry and Colloidal Systems
Laboratories
•Laboratory of Optical Microscopy
•Laboratory of Electronic Microscopy (SEM and TEM)
Laboratories
•Laboratory of Optical Microscopy
•Laboratory of Electronic Microscopy (SEM and TEM)
Metallurgical and Materials EngineeringMetallurgical and Materials Engineering
•Laboratory of Fracture Mechanics
•Hydrogen Laboratory
•Laboratory of Corrosion, Welding and Non-destructive Testing
•Laboratory of High Temperature Degradation of Materials
•Laboratory of Fracture Mechanics
•Hydrogen Laboratory
•Laboratory of Corrosion, Welding and Non-destructive Testing
•Laboratory of High Temperature Degradation of Materials
