metal toilet partitions - access smt · 2019. 9. 30. · metal toilet partitions unlike most other...
TRANSCRIPT
Compartments Partitions Cubicles Screens
Metal Toilet Partitions
SECTION 10160 | Metal Toilet Partitions
Since 1975, Shanahan’s has been manufacturing one of the most durable toilet partition products available. Our products are designed with classic, clean lines and are built to last for many years.
Metal Toilet Partitions
Unlike most other toilet partition product lines, which are made with two identical pans connected along the edge using a separate spline, our partitions are designed from two pans with interlocking sides that snap together during assembly. The corners of the panels and doors are then welded and finished. This edge design creates a very strong door/panel/pilaster. Unlike many manufacturers of toilet partitions who produce 1-1/4” thick pilasters and 1” thick doors and panels, Shanahan’s produces pilasters, doors and panels all to be 1-1/4” thick.
This product is suitable for installation in virtually any type of facility and is a very good choice for washrooms that are subjected to high use.
Our standard products are powder coated and we offer 30 standard and eight premium colour choices, including textured finishes. With their sleek appearance, and long-lasting durability, Shanahan’s toilet partitions are the best choice for your facility.
1
2
O.B. Overhead Braced Model• TheO.B.Modelisrecommendedforitsdurability
and economy.
• Theoverheadrailensuresarigidandstablecompartment.
• Themodelismostpopularinschools,restaurantsandpublic washrooms.
• Thegalvannealfloorchannelprovidesasimpleyetfirmplatform for the easily adjustable pilaster.
18"
46"
END ELEVATION
12"
58"
12"
1 PILASTER
2 DOOR
3 PANEL
4 HEADRAIL
5 SHOES
3
4
2
1
1 2
5 5 55
FRONT ELEVATION
41 1
ANODIZED ALUMINUMANTI-GRIP HEADRAIL
FLOOR CHANNELALLOWS ADJUSTMENTOF PILASTER
PILASTER WITHHONEYCOMB CORE
#12 x 5/8"PAN HEADSHEET METAL SCREW
#12 x 5/8"PAN HEADSHEET METAL SCREW
#12 x 1-1/2"PAN HEADSHEET METAL SCREWWITH EXPANSION ANCHOR
STAINLESS STEEL SHOE
SECTION THROUGH PILASTER
FOR OPTIMUM STRENGTHAND SAFETY, INSTALL WOOD BLOCKING IN HOLLOW WALLS (DRYWALL).
Metal Toilet Partitions
C.H. Ceiling Hung Model• Theunobstructedfloorareamakescleaningeasierandmaintenancesimpler.
• Thepilastersaresuspendedfromstructuralsupportsabovethefinisheddroppedceilingwith threaded rods.
• Recommendedinareaswhereeaseofcleaningisimportant.Maximumrecommendedheight is 8’0”. Not recommended where doors and panels are in the same plane (alcove compartments).
• Typicalinstallationsarehospitalsandofficebuildings.
18"
46"
END ELEVATION
1 PILASTER
2 DOOR
FRONT ELEVATION
12"
58"
SMLRECOMMENDS
MAXIMUMHEIGHT
OF8' 0"
3 PANEL
4 SHOE
3
4 4 4
1
2 2
1 1 1
FOR OPTIMUM STRENGTHAND SAFETY, INSTALL WOOD BLOCKING IN HOLLOW WALLS (DRYWALL).
F.B. Floor Braced Model• Flushtopgivesamodern,uniformappearance.
• Stabilityisachievedbyanchoringthepilastertothefloorwiththreadedrodsandexpansion anchors.
• Recommendedinareaswhereoverheadbracingisnotdesirableandwhereinstallationof ceiling hung compartments are not practical due to the height of the ceiling.
• Idealforofficebuildings.
18"
46"
END ELEVATION
FOR OPTIMUM STRENGTHAND SAFETY, INSTALL WOOD BLOCKING IN HOLLOW WALLS (DRYWALL).
12"
58"
3 21
1
4 4 44
FRONT ELEVATION
1 2 1
1 PILASTER
4 SHOES2 DOOR
3 PANEL
THREADEDRODAND NUTSALLOWADJUSTMENTOF PILASTER
PILASTERWITHHONEYCOMBCORE
EXPANSIONANCHOR
STAINLESSSTEELSHOE
SECTION THROUGH PILASTER FRONT ELEVATION/DETAIL
12Ga STEELSUPPORT BRACKETWELDED TOPILASTER
3
THREADEDRODAND NUTSALLOWADJUSTMENTOF PILASTER
PILASTERWITHHONEYCOMBCORE
STRUCTURALSUPPORT(BY OTHERS)
STAINLESSSTEELSHOE
SECTION THROUGH PILASTER FRONT ELEVATION/DETAIL
12Ga STEELSUPPORT BRACKETWELDED TOPILASTER
FINISHEDCEILING
5
4
FLOOR CHANNELALLOWS ADJUSTMENTOF PILASTER
PILASTER WITHHONEYCOMB CORE
SHOE, CHANNEL ANDFASTENERS AS PERFLOOR CONNECTION
#12 x 5/8" PAN HEADSHEET METAL SCREW
#12 x 1-1/2" PAN HEADSHEET METAL SCREWWITH EXPANSION ANCHOR
STAINLESS STEEL SHOE
SECTION THROUGH PILASTER
#12 x 1-1/2" PAN HEADSHEET METAL SCREWINTO BLOCKING
F.C. Floor and Ceiling Braced Models• Whereoptimumsupportisrequiredandabusecan beexpected,theF.C.Modelisrecommended.
• Thepilastersareattachedtothefloorandceilingusinggalvanneal steel channels, which are identical tothetypeusedfortheO.B.Model.
Doors, Panels and Pilasters
All steel is 20Ga galvanneal to avoid corrosion. All doors, panels and pilasters are fabricated to an overall thickness of 1-1/4”.
Self-locking EdgesDoors, panels and pilasters are all fabricated as pans with formed interlocking edges that snap together when assembled. This provides a very strong, double-thickness perimeter on the doors and panels. All corners are then welded and finished.
CoreForuniformflatness,a1-1/4”cellsizepaper honeycomb core is bonded to the steel faces using a specially designed adhesive.
An optional plywood composite solid core is available.
Anti-grip HeadrailTheclearanodizedaluminumheadrailfits over the pilaster and is secured to the wall with support brackets.
HardwareChrome-platedzincdiecastings(Zamac)arestandardonall models. See page 10 for all stock hardware.
STANDARD FEATURES
202 Surf White
301 Grey
385LondonFog389Fieldstone
820 Delph
260 Offsprey
584 Steel Grey
101 White
871 Kindling Wood
706Beige
1050AntiqueBronze
1015 Desert Stone
821 Plantation
720 Sand
310 Stone
All steel surfaces are cleaned and degreased in an automatic wash process and then iron phosphatised for positive paint adhesion. Doors, panels and pilasters are then powder coated in any of our 38 standard colours (custom colours available).
• Anti-graffiticoatingsareavailable.
• Customcoloursareavailablesubjectto minimumquantities.
• Coloursshownarefordemonstrationpurposes.Contact Shanahan’s for our Colour Selector.
100 Pure White
410 Teakwood
908Black
1001Rust
807Blue
200 Cadet Gray
325 Hemlock
800 Ultra Marine
1002 Pewter
600 Green
1059BengalSilverMetallic
970 Dawn
315NesikaBay
220 Slate
1820AntiqueSilver
1430 Textured White
403 Yellow
270 Sunset
415 Northern Star
560Burgundy
1250MidnightBlack
390 Coffee
504Red
Standard Finishing
Premium Textured Finishing
Powder Coated Finish
5
6
Shanahan’s manufactures additional height doors and panels (64” and 72”) to maximize user privacy. For complete privacy, a series of special components are available, which when installed eliminate any visible spaces between doors and pilasters, as well as pilasters and panels.
• HingeFiller:aluminum(suitableforpowdercoating or can be polished for stainless steel applications).
• DoorStop:aluminum(suitableforpowdercoating or can be polished for stainless steel applications).
• “F”Channel:galvannealsteelorstainlesssteel.
• “U”Channel:galvannealsteelorstainlesssteel.
Continuous Doorstop ContinuousHingeFiller
4
31
7
8
6
2 5
7
FULL PRIVACY SERIES COMPONENTS
1. CONTINUOUS DOOR STOP2. CONTINUOUS HINGE FILLER3. CONTINUOUS “U” CHANNEL4. CONTINUOUS “T” CHANNEL5. CONTINUOUS “F” CHANNEL6. DOOR7. PILASTER8. PANEL
Maximum Privacy Series
Stainless Steel ConstructionAll of Shanahan’s toilet compartments are available in type 304 stainless steel finish. Stainless steel is of premium qualityconstruction,whichoffersexceptional longevity with unsurpassed corrosion resistance.
Maintenance is greatly reduced as nopartsrequirepainting.Andthegleaming appearance will suit most of today’s decors.
• DairyandBeverageareas
• Distilleries
• FoodProcessing
• Hospital/Laboratory
• Hotels
• IceandRollerRinks
• LeisureCentres
• MeatPackingPlants
• MilitaryBases
• PublicShowers
• SportsArenas
• SwimmingPools
#4Finish
Ideal for installations where the highest degree of cleanliness and corrosion resistance is of prime importance,includingthefollowingareas:
STAiNlESS STEEl FiNiSH oPTioNS
APPliCATioNS moDElS AvAilAblE
• O.B.OverheadBraced
• F.B.FloorBraced
• C.H.CeilingHung
• MaximumPrivacy
Leathergrain#2BFinish60-Lth Rigidized#4Finish5-WL
SPlASH PANElS
Type 304-4 brushed stainless steel for additional protection adjacent to urinals.
STAiNlESS STEEl HARDWARE
Hardware is available in stainless steel, surface mounted only.
7
8
Model “WH” Wall Hung• Chromewalland“wing”brackets
• Screen18”or24”widex42”high
Model “FB” Floor Braced• 70”highanodizedaluminumpost
• Chromeflangeandbrackets
• Custompanelwidth(standardheightis58”)
24"
30"
18"
42"
18" or 24"
70"
58"
1-3/4"SQUARE POST
PANEL WIDTHTO SUIT
46"
18"12"
18"
46"
PANEL WIDTHTO SUIT
1-3/4"SQUAREPOST
12"
58"
10' 0"MAX. HT.
Model “FC” Floor to Ceiling Post• 120”highanodizedaluminumpost
• Chromeflangeandbrackets
• Custompanelwidth(standardheightis58”)
FOROPTIMUMSTRENGTHANDSAFETY,INSTALLWOODBLOCKINGINHOLLOW
WALLS(DRYWALL).
Vision and Urinal Screens
oPTioNS• Vinyl or duck shower curtains • Chrome shower rods • Concealed curtain track • Cedar or maple • 64”/72” high panels
18"
46"
BACKING HEIGHTSFOR MOUNTING BRACKETS
TS-140 AND TS-150HINGE BRACKETS
TS-130STRIKE AND KEEPER
TS-120COMBINATIONHOOK/BUMPER
TS-110-1CONCEALEDLATCHASSEMBLYPILASTER DOOR
1" SPACEMAXIMUM
LATCH BOLT
#12 x 2" PAN HEADSHEET METAL SCREW
(TYPICAL)
#12 x 5/8" PAN HEADSHEET METAL SCREW
(TYPICAL)
1"
ALL DOORS, PANELS AND PILASTERS ARE 1-1/4" THICK
TS-200"U" BRACKET
USE WALL ANCHORSIN CONCRETE ORMASONRY WALLSONLY
TS-100"F" BRACKET
PILASTER
PANEL
FOR OPTIMUM STRENGTHAND SAFETY, INSTALL WOOD
BLOCKING IN HOLLOW WALLS (DRYWALL).
IN CORNER
57"to60"
32"to36"
BETWEEN WALLS
57"to60"
32"to36"
FREE STANDING
57"to60"
32"to36"
ALCOVE - OPEN END
32"MINIMUM
60"to
120"
ALCOVE - BETWEEN WALLS
32"MINIMUM
60"to
120"BARRIER-FREE COMPARTMENTS
CHECK YOUR LOCAL REGULATIONS FOR MINIMUM REQUIREMENTS FOR TOILET COMPARTMENTS FOR THE DISABLED.
18"
46"82"
CONCRETE CURB(OPTIONAL – BY OTHERS)
36" 36"
58"
36" 36" 36" 36"
END ELEVATION PLAN VIEW
BENCH(OPTIONAL)
36"
CURTAIN(OPTIONAL)
12"
TyPiCAl CRoSS-SECTioN AND DETAil
TyPiCAl ToilET ComPARTmENT lAyoUTS
SHoWER AND DRESSiNg ComPARTmENTS
9
10
SpecificationsMetal Toilet Partitions
PANEl AND PilASTER bRACKETS
1-1/4”PANEL&PILASTERTOWALLBRACKET 1-1/4”PANELTOPILASTERBRACKET ALCOVELBRACKET
TS-100 TS-200 TS-140-1
PilASTER HARDWARE
CEILINGHUNGPILASTERANCHORKIT FLOORBRACEDPILASTERANCHORKIT
STAINLESS STEEL SHOES
TCH-700 TFb-450 TS-XX
CoNCEAlED DooR HARDWARE
CONCEALEDINDICATORLATCHASSEMBLY STRIKEANDKEEPER
TS-110 TS-130
LOWERHINGEASSEMBLY UPPERHINGEASSEMBLY
TS-140 TS-150
SURFACE DooR HARDWARE
SURFACELATCH SURFACESTRIKEANDBUMPEREMERGENCYACCESS
FLIPLATCH SURFACEMOUNTEDHINGES
TS-300 TS-401 TS-400-4 TS-234 (lH) and TS-235 (RH)
DooR HARDWARE ACCESSoRiES
COATHOOKANDBUMPER DOORPULL
TS-120 TS-211
HEADRAil AND HEADRAil bRACKETS
ALUMINUMANTI-GRIPHEADRAIL HEADRAILENDCAP HEADRAILBRACKETS HEADRAILCONNECTOR
THR-XX TS-160 TS-170 TS-165
SHoWER AND CHANgE STAll HARDWARE
CONCEALEDTRACKANDHOOK SHOWERRODFLANGE SHOWERCURTAINHOOK TRIANGULARSUPPORTFOR
WOOD SEAT
TS-210 TS-302 TS-203 TS-201-1
SCREEN HARDWARE
POSTFLANGE POST CAP WINGBRACKET
TS-169 TS-190 TS-2500
All standard door, panel and pilaster hardware are chrome-plated zinc die castings (Zamac). Brackets, concealed door hardware, shoes and headrail are manufactured to fit Shanahan’s 1-1/4” square edge. Replacement and special parts are available upon request.
POWder COaTed TOileT ParTiTiOnS ____MATERIALAll sheet metal to be galvanneal steel to ASTM #A653 ZF 120 (A40).
DOORS AND PANELSTo be 1-1/4” (32 mm) thick. Constructed of two sheets galvanneal steel, minimum 20Ga. The sheets are to be cemented under pressure to a honeycomb core. The sheets are to be formed and finished with continuous self-locking edges with the corners mitred, welded and ground smooth. Height of doors and panels to be 57-1/2” (1461 mm) high.
PILASTERS—OVERHEAD BRACED (O.B.)To be manufactured using the same materials and fabrication as outlined in doors and panels. Height of pilasters to be 81” (2057 mm). A 16Ga galvanneal steel floor channel is to be fastened to the floor with expansion anchors. The pilaster is to be positioned over the floor channel and fastened with sheet metal screws to the channel. 4” (102 mm) high shoes to be manufactured of type 304 #4 finish stainless steel to ASTM #A240 minimum 20Ga with continuous self-locking edges (fasteners are not required).
PILASTERS—FLOOR BRACED (F.B.)To be manufactured using the same materials and fabrication as outlined in doors and panels. Height of pilasters to be 70” (1778 mm). The top of the pilaster is to be formed the same as the sides. The bottom of the pilaster is to be reinforced with minimum 11Ga carrying channel secured to the floor with concrete expansion anchors. Stainless steel shoes same as for O.B. pilasters.
PILASTERS—CEILING HUNG (C.H.)To be manufactured using the same materials and fabrication as outlined in doors and panels. Maximum height for pilasters to be 120” (3048 mm). The bottom of the pilaster is to be formed the same as the sides. The top of the pilaster is to be reinforced with minimum 11Ga carrying channel and prepared for ceiling connection. Stainless steel shoes same as for the O.B. pilaster.
HEADRAILSTo be clear anodized alloy and temper 6063T5, anti-grip design. The outer flanges are to fit over the facing of the pilaster. The headrail is to be supported at the wall with aluminum painted Zamak support brackets.
HARDWAREAll door hardware, panel and pilaster brackets to be chrome-plated zinc die castings (Zamac).
Door hinge housings to be recessed into door for extra strength and flush appearance. 3/8” (9.5 mm) cold-rolled steel threaded barrel pin to secure top hinge to door (plastic is not acceptable). Gravity door hinges to be adjustable for any position.
Concealed door latch shall be vandal-proof and accessible from the exterior in emergencies. The slide latch with knob is suitable for persons with disabilities (easy to grasp with one hand and does not require tight grasping/pinching, or twisting of the wrist). The door swing is to be interchangeable by reversing the door latch.
Combination doorstop and keeper to have slotted hole for latch bolt. A continuous black rubber bumper is to be integral with the doorstop.
Combination coat hook and bumper to be supplied for each door. Fitted with black rubber bumper.
Hardware
STAiNlESS STEEl HARDWARE
Hardware is available in stainless steel, surface mounted only.
Distributed by
www.shanahans.com