metal-enclosed medium voltage switchgear switchgear... · 2019. 12. 20. · mv switchgear product...
TRANSCRIPT
Tradition. Technology. Innovation.
Metal-EnclosedMedium Voltage Switchgear
Full Customization and Design Flexibility
Component & Metering Selection Options
Cost-effective Option Provides Safe, Dependable Switching and Fault Protection
Seismic Tested to Worst Case Response Spectrum
Indoor and Outdoor Applications
UL or CSA Listed; Meets ANSI, IEEE, and NEMA Standards
• Voltage 2400V – 27kV
• Ampacity 600A – 3000A
• Rear access for load and incoming connections
• Front connections when required
• Single phase load protection when required
• Arranged to metal clad configuration if applicable
• Compartmentalized construction including utility metering for most U.S. utilities
• Unit substation primaries
• Indoor or outdoor application
MV SWITCHGEARProduct Sheet
FEATURES & BENEFITS
Fusible Load InterruptersIEM’s fusible load interrupter product line is available in the 2.4kV, 5kV, 15kV, and 27kV classes in outdoor non-walk-in, outdoor walk-in and indoor enclosures. IEM metal enclosed switchgear utilizes a compartmentalized construction isolating the bus, cable, and main switches and allowing for minimal maintenance and use of interior barriers.
Metal-enclosed switchgear can be configured to meet unique physical and electrical requirements.
Industrial Electric Mfg.™ (IEM)
Headquartered in Fremont, CA, IEM is the largest independent full-line manufacturer of electrical distribution and integrated control systems in the U.S. For over half a century, IEM has delivered customer-specific solutions to meet the ever changing power requirements of growth industries in North America. At IEM, tradition and technology still drive innovation. An experienced engineering staff and one of the most flexible design and manufacturing systems in the industry set IEM apart from standard product manufacturers.
www.iemfg.comCorporate Headquarters
Industrial Electric Mfg.™ 48205 Warm Springs Blvd Fremont CA 94539 USA dir: +1.510.656.1600 www.iemfg.com
Vancouver
Industrial Electric Mfg.™ 201 – 27353 58th Crescent Langley, B.C. V4W 3W7 CAN dir: +1.866.302.9836 www.iemfg.com
©2017 The New IEM LLC. Industrial Electric Mfg.™ and IEM Power Systems™ are trademarks of The New IEM LLC. in the U.S. and other countries. All rights reserved.
Jacksonville
IEM Power Systems™ 11902 Central Parkway Jacksonville FL 32224 USA dir: +1.904.365.4444 www.iemps.com
Metal-EnclosedMedium Voltage Switchgear
MV SWITCHGEARProduct Sheet
IEM DIFFERENCE
All enclosures are designed for specific application with improved dimensional flexibility and finished using state of the art powder coating system providing an indoor finish that exceeds the 1500 hour salt spray testing requirement for outdoor equipment to 3000 hours.
Component and metering selections are based on value engineering for the application and optimized to meet specifications.
SEISMIC RATED
Seismic testing completed – fully qualified to worst case response spectrum.
TECHNICAL SPECIFICATIONS
IEM Switchgear meets or exceeds all ANSI, IEEE, and NEMA standards applicable to metal-enclosed switchgear including C37.20, C37.20.2, C37.20.3, C37.55, C37.57, and NEMA SG-4.
IEM Switchgear meets seismic testing, circuit requirements as outlined by IEEE344 and ICC-ES-AC156.
NEMA 1 and 3R enclosures