metal cutting fluids hp koolkut 40 metal... · v //taeoeo ea eae@ to free 1800 120 4725 / 1800 121...
TRANSCRIPT
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
METAL CUTTING FLUIDSHP KOOLKUT 40This is general-purpose emulsifiable oil and forms milky white emulsion.
Meets specifications: IS : 1115 and ZX of Indian defense
Application areas: Suitable for all metals for machining operations where emulsifiable oil are normally used. The recommended concentration is between 5 to 10 % depending on the severity of machining. Sometimes used successfully for even grinding operations.
Physico-chemical properties
PROPERTIES KOOLKUT 40COLOUR, AFTER EMULSIFICATION MILKY WHITE KINEMATIC VISCOSITY @ 40 °C, MIN, CST 20FLASH POINT, COC °C MIN 150COPPER CORROSION @100 °C, MIN 1CAST IRON CORROSION TEST, 0/1-1 20:1 EMULSION WITH 400 PPMHARD WATER MAXEMULSION TEST: 400 PPM HARD 0.1 ML OF OILANDWATER, 5:1 AND 20:1 RATIO 0.2 ML CREAM MAX PERMITTED
Performance benefits: Good surface finish Built in protection against bacterial growth Excellent emulsion stability Good heat removal properties
Page 1 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP KOOLKUT 60General purpose emulsifiable cutting oil forming a translucent emulsion. The ultra-fine dispersion of the oil globules reduces grinding wheel clogging and low oil content emulsion may be used safely without loss of non-corrosive properties.
Meets specifications: IS: 9611-198
Application areas: Suitable for all metals for machining operations where emulsifiable oils are normally used.
The recommended concentration is between 5 to 10 % depending on the severity of machining. Particularly useful for all applications where sight of the work place is important.
Physico-chemical properties
PROPERTIES KOOLKUT 60
COLOUR, AFTER EMULSIFICATION TRANSLUSCENT
POUR POINT OF OIL °C, MAX 18
FLASH POINT, COC °C MIN 150
COPPER CORROSION @100°C, MIN 1
CAST IRON CORROSION TEST, WITH 5:1 AND 20:1 EMULSION MAX 0/1-1
EMULSION TEST: A-EP METHOD AND RATIOS PASSES
B-5:1 AND 20:1 AS PER IS sm 1115:1986
Page 2 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP KOOLKUT 60 EP 66, EP 67General purpose emulsifiable cutting oil forming a yellowish emulsion with EP characteristics for moderate to heavy duty applications. KOOLKUT EP 67 is recommended as a coolant in stainless steel rolling.
Application areas: Its main application is with high-speed steel tools in practically all major cutting processes and on most metals, including difficult alloy steel. It is more effective than ordinary emulsifiable oils in extending tool life. Recommended concentration is 5 to 10 % depending on the severity of machining.
Physico-chemical properties
PROPERTIES KOOLKUT 66
COLOUR OF THE OIL, ASTM, MAX 8
COLOUR AFTER EMULSIFICATION YELLOWISH
FOUR BALL EP VALUE WELD LOAD, Kg MIN 200
COPPER CORROSION@ 100°C, 3 HRS 2
EMULSION STABILITY
WITH D : WATER (ML,CREAM) MAX 0.5
WITH S . WATER & H: WATER PASSES
Performance benefits: Good surface finish Built in protection against bacterial growth Excellent emulsion stability Good heat removal properties Marked increase in tool life
Page 3 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP KOOLKUT 70Metal working fluid containing no oil but consisting of special corrosion preventive additives in water. This product is supplied as concentrate.
Application areas: Rust preventive type of coolant specifically designed for grinding and high speed machining. Recommended dilution ratio with water is 2-4 %.
Physico-chemical properties
PROPERTIES KOOLKUT 70
COLOUR AFTER DILUTION FlOURESCENT GREENISH
YEllOW YELLOWISH
COPPER CORROSION @ 100°C, 3HRS, MAX 1
pH OF 1 :50 SOLUTION IN DISTILLED WATER MAX 9
CORROSION RATING 40:1 EMULSION IN 0
DISTILLED WATER MAX 0.5
Performance benefits: Superior cooling properties Excellent rust preventive properties low grinding wheel clogging
Page 4 of 23
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP KOOLKUT 80Superior emulsifiable cutting oil forming a white milky emulsion having longer life. The product forms biostable emulsions facilitating easier handling and disposal.
Meets specifications: IS: 1115-1993
Application areas: Suitable for all metals for machining operations where emulsifiable oils are normally used. The recommended concentration is between 3 to 5% depending on the severity of machining. Product can be used successfully even for grinding operations.
Physico-chemical properties
PROPERTIES KOOLKUT 80
COLOUR AFTER EMULSIFICATION MILKY WHITE
KINEMATIC VISCOSITY@ 40°C, MIN, cSt 20
FLASH POINT, (COG), DC, MIN 150
COPPER CORROSION @ 100°C, 3HRS, MAX 1
CAST IRON CORROSION TEST, 20:1 EMULSION 0
WITH 400 PPM HARD WATER MAX 0/1-1
EMULSION TEST: 400 PPM HARD WATER, 0.1 ML OF OILAND 0.2 ML
5:1 AND 20:1 RATIO CREAM MAX PERMITTED
Performance benefits: Good surface finish Built in protection against bacterial growth Exceptional emulsion stability Good heat removal properties Long life and pH stability
Page 5 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
SYNTHKOOL 100, 101, 102Semi-synthetic cutting fluid consisting of carefully selected rust preventive additives and other performance improvers, supplied in solution form. Synthkool1 00 & 102 is totally synthetic.
Application areas: Recommended concentration in the ratio of 2-4% in water. The resultant solution provides exceptional anti-rust & cooling properties when used in grinding and other high speed machining operations. It is highly resistant to bacterial attack and provides long life in use.
Physico-chemical properties
PROPERTIES SYNTHKOOL 100 SYNTHKOOL 101 SYNTHKOOL 102
APPEARANCE FlUORESCENT YELLOW FlUORESCENT FlUORESCENT
COPPER STRIP CORROSION 3HR @ 100°C, MAX
CAST IRON CORROSION TEST
1 :40 IN Distilled WATER O/H @50:1 @50:1
1 :40 IN HARD WATER-200 PPM O/H 0/0-0 0/0-0
pH OF 1 :40 SOLUTION IN Distilled WATER 8-8.5 9 9
Performance benefits: Extraordinary surface finish Good heat removal properties Excellent rust preventive properties Low consumption
Page 6 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOFIN 14, 15, 16, 18Oiliness type straight cutting oils. Blends of refined mineral oils and additives improve wetting characteristics. These oils are of non-staining type.
Meets specifications: Trimofin 18 meets IS 3065 type 1 grade 2
Application areas: These oils are suitable for machining nonferrous metals and light machining and free cutting of steels. Trimofin 14 & 15 are light coloured low viscosity oils recommended for machining of all metals except titanium. These oils are specially designed for honing applications. Trimofin 16 & 18 have higher viscosity and superior wettability. Trimofin 18 is acceptable for drawing of non-ferrous rods and tubing as well.
Physico-chemical properties
PROPERTIES TRIMOFIN 14 TRIMOFIN 15 TRIMOFIN 16 TRIMOFIN 18
KINEMATIC VISCOSITY, cSt @ 40°C 2.2 - 8.4 3.0 - 9.0 20.1 - 24.8 20.1- 24.8
FLASH POINT, (COC) , °C, MIN 110 110 160 150 (PMCC)
COPPER STRIP CORROSION 3 HR @ 100°C, (ASTM), MAX
SAPONIFICATION NUMBER mg KOH/gm+ 6.0 - 8.5 6.0 - 8.5 9.0 -10.5 18 - 21
ACIDITY ORGANIC, mg KOH /gm Oil, MAX - - 0.1 0.2
Performance benefits: Excellent cooling Excellent chip flushing properties High wettability to provide maximum lubricity Increased tool life
Page 7 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOFIN 20Non staining type straight cutting oil treated with chlorinated EP additive. This oil has low viscosity and is light in colour.
Application areas: Product is recommended for use in automobile, bearing and watch industries for honing, lapping and super finishing operations of ferrous and non-ferrous metals.
Physico-chemical properties
PROPERTIES HP TRIMOFIN 20
KINEMATIC VISCOSITY @ 40 °C, cSt 4-8.4
FLASH POINT °C, COC, MIN 110
COPPER CORROSION 3HRS, @100 °C, MAX 1
FOUR BALL OK LOAD, Kg, MIN 240
Performance benefits: Excellent finishing Excellent chip flushing properties Increased tool life
Page 8 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOFIN 21Non staining type straight cutting oil treated with chlorinated EP additive and fortified with oiliness additives. Suitable for light and medium conditions.
Meets specifications: IS: 3065 type1 grade 2
Application areas: Suitable for machining operation in mild steels, carbon steels, nickel steels and manganese steels. The product is also suitable for copper and aluminum and their alloys.
Physico-chemical properties
PROPERTIES HP TRIMOFIN 21
KINEMATIC VISCOSITY @ 40 °C,cSt 20-30
FLASH POINT °c, COC, MIN 160
COPPER CORROSION 3HRS, @100 °C, MAX 3
SAPONIFICATION VALUE mg KOH/gm 9.0-19.0
COLOUR, ASTM, MAX 6
CONTAINS
INACTIVE SULPHUR NO
ACTIVE SULPHUR NO
CHLORINE YES
Performance benefits: Good surface finish Built in protection against bacterial growth Excellent emulsion stability Good heat removal properties Marked increase in tool life
Page 9 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOFIN 23, TRIMOFIN 25Non staining type straight cutting oil treated with EP additives and fortified with oiliness additives. Suitable for use in high speed automatic machine tools. Trimofin 25 contains more potent EP additives.
Meets specifications: IS: 3065: 1970 type 2 grade 2.
Application areas: Suitable for use in high speed automatic machine tools steels. The product is suitable for ferrous and non-ferrous metals.
Physico-chemical properties
PROPERTIES HP TRIMOFIN 23
KINEMATIC VISCOSITY @ 40 °C, cSt 27 -42
FLASH POINT DC, COC, MIN 160
COPPER CORROSION 3HRS, @1 00°C, MAX 2
SAPONIFICATION VALUE mg KOH/gm MIN 9
COLOUR, ASTM, DILUTE, MAX 6
CONTAINS
INACTIVE SULPHUR YES
ACTIVE SULPHUR NO
CHLORINE NO
Performance benefits: Good wettability Excellent EP properties Excellent chip flushing and penetration
Page 10 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOFIN 26Non staining EP type straight cutting oil containing chlorine and inactive sulphur fortified with oiliness additives.
Application areas: Suitable for use in high speed automatic machine tools steels.the product is suitable for ferrous and non ferrous metals.
Physico-chemical properties
PROPERTIES HP TRIMOFIN 26
KINEMATIC VISCOSITY @ 40 °C,cSt 23-36
FLASH POINT DC, COC, MIN 160
COPPER CORROSION 3HRS,@1 00 DC, MAX 2
COLOUR, ASTM, DILUTE, MAX 38
CONTAINS
INACTIVE SULPHUR YES
ACTIVE SULPHUR NO
CHLORINE YES
Performance benefits: Good wettability Mild EP properties Excellent chip flushing and penetration
Page 11 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOFIN 27Non staining EP type straight cutting oil containing chlorine and inactive Sulphur fortified with oiliness additives. Application areas:
Suitable for usage in drilling type of operations and is found to be particularly useful on pull honing operations.
Physico-chemical properties
PROPERTIES HP TRIMOFIN 27
KINEMATIC VISCOSITY @ 40 °C, cSt 8.0-17.0
FLASH POINT DC, (COC) , MIN 145
COPPER CORROSION 3HRS, @100 °C, MAX 3
COLOUR, ASTM, DILUTE, MAX CONTAINS 6
INACTIVE SULPHUR YES
ACTIVE SULPHUR NO
CHLORINE YES
Performance benefits: Good wettability Mild EP properties Excellent chip flushing properties Remarkable cooling properties
Page 12 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOFIN 12Description: Premium low viscosity neat cutting oil specially developed for polishing of alloy steel strips. Particularly suitable for applications where belt polishing is done and where high degree of surface finish and mist control are required.
It is a high performance cutting and neat grinding oil based on specially selected, thermally stable base oils. Trimofin 12 provides a consistent level of grinding performance as well as guaranteeing excellent lubrication and cooling. It gives good grinding performance with control on stray mist.
Application areas: Belt grinding Centerless Grinding Creep feed grinding Flute grinding.
Physico-chemical properties
PROPERTIES HP TRIMOFIN 12
APPEARANCE BRIGHT & CLEAR
ACIDITY, TOTAL, mg KOH/g, Max 0.10
COLOUR, ASTM, Max 1.5
DENSITY @ 29 °C, gm/cc 0.850
FLASH POINT, COC, °C, min 150
POUR POINT, DC, Max -6
KIN. VISCOSITY @ 40°C, cSt 11-13
Advantages: Lowest possible mist generation; good air release. Low foaming property. Improved lubrication. Does not affect paints and coatings. Excellent operator acceptance; skin compatibility, mild odour. Maintains surface finish
Page 13 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
TRIMOFIN 19This low viscosity product is used as a honing oil and is used for honing operations in automobile plants.
SPECIFICATIONS
APPEARANCE CLEAR
COLOUR RED
KINEMATIC VISCOSITY @ 40°C, cSt 4.5-5.5
COPPER STRIP CORROSION @ 100°C, 3 HRS 1
FLASH POINT, COC, °C, Min 120
DENSITY @ 29°C, gm/cc 0.818
Page 14 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
TRIMOFIN ALFully synthetic low viscosity oil suitable for cutting operations of Aluminum. This oil is specially designed for oil mist type cutting systems and where non-staining properties are required. It functions as a coolant, cutting oil and prevents sticking of tool to the work piece.
SPECIFICATIONS
APPEARANCE Clear
ACIDITY INORG, mg KOH / g Nil
DENSITY @ 29°C, gm/cc 0.831
FLASH POINT, (COC) , °C 130
KIN VISCOSITY @ 40°C, cSt 12.60
HYDROXYL VALUE mg KOH/g 218.00
FLASH POINT, DC, PMC 130.00
SOLIDIFICATION TEMP, °C 20.00
Page 15 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
TRIMOFIN 22 / TRIMOFIN 22 CFCompounded low viscosity neat cutting oil specially designed for bearing industry guaranteeing super surface finish. Trimofin 22 CF is a Chlorine free version.
TEST DESCRIPTION VALUE
APPEARANCE Clear
DENSITY @ 29°C .826
KIN VISC @ 40°C, cSt 6.0
Page 16 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOFIN 54Staining EP type straight cutting oil containing active and inactive Sulphur fortified with oiliness additives.
Meets specifications: IS: 3065 Type III
Application areas: Low viscosity oils specially developed for deep hole drilling and precision grinding of all kinds of steel. It is also suitable for usage in applications like thread rolling and other medium and heavy duty ferrous metal machining.
Physico-chemical properties
PROPERTIES HP TRIMOFIN 54
KINEMATIC VISCOSITY @ 40 °C, cSt 12.7-23.2
FLASH POINT °C, (COC) , MIN 135
SAPONIFICATION VALUE, mg KOH/gm 3
COLOUR, ASTM, DILUTE, MAX 7
CONTAINS
INACTIVE SULPHUR YES
ACTIVE SULPHUR YES
CHLORINE NO
Performance benefits: Good chip flushing properties Excellent EP properties
Page 17 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOFIN 54Staining EP type straight cutting oil containing active and inactive Sulphur fortified with oiliness additives.
Meets specifications: IS: 3065 Type III
Application areas: Low viscosity oils specially developed for deep hole drilling and precision grinding of all kinds of steel. It is also suitable for usage in applications like thread rolling and other medium and heavy duty ferrous metal machining.
PROPERTIES HP TRIMOFIN 54
KINEMATIC VISCOSITY @ 40 °C, cSt 12.7-23.2
FLASH POINT °C, (COC) , MIN 135
SAPONIFICATION VALUE, mg KOH/gm 3
COLOUR, ASTM, DILUTE, MAX 7
CONTAINS
INACTIVE SULPHUR YES
ACTIVE SULPHUR YES
CHLORINE NO
Performance benefits: Good chip flushing properties Excellent EP properties
Page 18 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOFIN 55Staining EP type straight cutting oil containing active sulphur and chlorine fortified with oiliness additives possessing medium viscosity.
Application areas: Medium viscosity oil specially developed for heavy duty applications like gear hobbing, thread cutting etc. The oil is also suitable for all machining operations on high tensile steels and for less severe operations on stainless and shear resistant alloys.
PROPERTIES HP TRIMOFIN 55
KINEMATIC VISCOSITY @ 40 °C, cSt 32-45
FLASH POINT °C, (COC) , MIN 160
SAPONIFICATION VALUE, mg KOH/gm
COLOUR, ASTM, DILUTE, MAX 8
CONTAINS
INACTIVE SULPHUR No
ACTIVE SULPHUR YES
CHLORINE YES
Performance benefits: Excellent heat removal properties Excellent EP properties Superior wettability
Page 19 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOFIN 56Staining EP type straight cutting oil containing active sulphur and chlorine fortified with oiliness additives possessing medium viscosity.
Application areas: Medium viscosity oil suitable for heavy duty applications such as threading, broaching, tapping etc on ferrous metals.
PROPERTIES HP TRIMOFIN 56
KINEMATIC VISCOSITY @ 40 °C, cSt 32-45
FLASH POINT °C, (COG), MIN 160
SAPONIFICATION VALUE, mg KOH/gm -
COLOUR, ASTM, DILUTE, MAX 8
CONTAINS
INACTIVE SULPHUR YES
ACTIVE SULPHUR YES
CHLORINE YES
Performance benefits: Excellent heat removal properties Excellent EP properties Superior wettability Improved finish Increased tool life
Page 20 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOFIN 58Staining EP type straight cutting oil containing inactive Sulphur possessing medium viscosity. The product is dark in colour.
Application areas: Medium viscosity oil suitable for heavy duty applications such as threading, broaching, tapping etc. on ferrous metals.
PROPERTIES HP TRIMOFIN 58
KINEMATIC VISCOSITY @ 40 °C, cSt 29-39
FLASH POINT °C, (COG), MIN 160
CONTAINS
INACTIVE SULPHUR NO
ACTIVE SULPHUR YES
Performance benefits: Excellent heat removal properties Excellent EP properties Superior wettability Improved finish Increased tool life
Page 21 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
TRIMOFIN 64 / 65 / 66These are special purpose broaching & grinding oils having enhanced EP properties. They contain active sulfur.
PROPERTIES TRIMOFIN
64 65 66
SPECIFICATIONS MIN MAX MIN MAX MIN MAX
APPEARANCE CLEAR
Cu STRIP, CORROSION, 100°C, 3 hrs 4 4 4
DENSITY @ 29°C, gm/cc 0.875 1.010 1.030
FLASH POINT, (COC), °C 160 130 130
SAPONIFICATION VALUE, mg KOH / g 5 15
KINEMATIC VISCOSITY @ 40°C, cSt 40 55 14 16 30 32
E P PROPERTIES
FOUR BALL OKAY LOAD, kgs 600 800 800
Page 22 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HYDRULKUT 45Dual-purpose oil suitable for both Hydraulic & cutting applications. The neat oil is suitable for usage with yellow metals as well.
PROPERTIES HYDRULKUT 45
APPEARANCE Clear amber fluid
KINEMATIC VISCOSITY @ 40°C, cSt 46.02
FLASH POINT, COC, °c 206
DENSITY @ 15°C, gm/cc 0.8896
Cu CORROSION @ 100°C, 3 H 1a
DEMULSIBILlTY, ASTM 0 1401 40-40-0
FOAMING TENDENCY/STABILITY
SEQUENCE I 30/0
SEQUENCE II 20/0
SEQUENCE III 30/0
CORROSION TEST, 0 665 (A&B) PASSES
Page 23 of 24
Visit us: http://www.hindustanpetroleum.com
Email: [email protected] | Toll Free: 1800 120 4725 / 1800 121 4725 | Phone: 022-22637000 | Follow us on: www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRIMOL 225New generation metal working product blended with low viscosity refined mineral oil and potent chlorinated additive.
Application areas: Recommended for all machining operations involving high speeds and low to moderate severity.
PROPERTIES HP TRIMOL 225
COLOUR, VISUAL RED
KINEMATIC VISCOSITY @ 40 °C, cSt 2.0-7.0
FLASH POINT °C, COC, MIN 90
COPPER CORROSION 3HRS, @100 °C, MAX 1
CONTAINS
INACTIVE SULPHUR NO
ACTIVE SULPHUR NO
Performance benefits: Excellent lubricity Superior chip flushing Effective cooling Greater penetration
Page 24 of 24