messages and codes - ibm...awsjic - installation (installshield wizard) common messages 527 awsjis -...

Workload AutomationVersion 8.6 Fix Pack 2 (revised December 2012)

Messages and Codes

SC23-9114-05

��

NoteBefore using this information and the product it supports, read the information in “Notices” on page 1373.

This edition applies to version 8, release 6, modification level 0 Fix Pack 1 of IBM Tivoli Workload Automation(program numbers 5698-WSH and 5698-A17) and to all subsequent releases and modifications until otherwiseindicated in new editions.

This edition replaces SC23-9114-03.

© Copyright IBM Corporation 2001, 2012.US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contractwith IBM Corp.

Contents

List of tables . . . . . . . . . . . . vii

About this publication . . . . . . . . ixWhat is new in this release . . . . . . . . . ixWhat is new in this publication . . . . . . . . ixWho should read this publication . . . . . . . xIntroduction to messages . . . . . . . . . . xPublications . . . . . . . . . . . . . . xAccessibility . . . . . . . . . . . . . . xiTivoli technical training . . . . . . . . . . xiSupport information . . . . . . . . . . . xi

Part 1. Tivoli Workload Schedulermessages . . . . . . . . . . . . . 1

Chapter 1. Tivoli Workload Schedulermessages . . . . . . . . . . . . . . 5Tivoli Workload Scheduler message format . . . . 5

Message number . . . . . . . . . . . . 5Message text . . . . . . . . . . . . . 6Message help . . . . . . . . . . . . . 7

AWKALR - Allocation repository messages . . . . 8AWKAUD - Audit service messages . . . . . . 9AWKCAL - Calendar . . . . . . . . . . . 11AWKCDM - Change and configuration managementdatabase messages . . . . . . . . . . . . 13AWKCGE - Cognos Plug-in messages . . . . . 15AWKCLI - Command line messages . . . . . . 20AWKDBE - Database Job Executor messages . . . 26AWKDSE - InfoSphere DataStage Plug-in messages 28AWKEJE - Enterprise Java Bean . . . . . . . 31AWKEWL - Enterprise workload manager messages 34AWKEXE - Executable Job Executor messages . . . 36AWKFTE - File transfer Job Executor messages . . 38AWKICA - Calendar messages . . . . . . . . 41AWKIIE - IBM iconic Job Executor messages . . . 42AWKIPC - Informatica PowerCenter Plug-inmessages . . . . . . . . . . . . . . . 43AWKITM - ITM scanner messages . . . . . . . 46AWKJBN - Job definition base notify servicemessages . . . . . . . . . . . . . . . 48AWKJDD - Job definition service messages . . . . 49AWKJDE - Job dispatcher messages . . . . . . 50AWKJEJ - WebSphere Java 2 Enterprise Edition jobexecutor for CAS . . . . . . . . . . . . 68AWKJJE - Java job executor messages. . . . . . 71AWKJNT - Job definition notify service messages. . 72AWKJSD - Job Submission Description Languageeditor messages . . . . . . . . . . . . . 73AWKJSV - Job definition service messages . . . . 78AWKPIC - SAP Process Integrator messages . . . 79AWKRAA - Resource advisor agent . . . . . . 81AWKRAE - Resource Advisor EJB messages . . . 82AWKRRP - Resource repository messages . . . . 88

AWKRSE - Resource advisor agent cache messages 96AWKSED - Job repository data access objectmessages . . . . . . . . . . . . . . . 97AWKSPI - Scheduler SPI messages . . . . . . 99AWKSUL - Utility messages . . . . . . . . 100AWKTEP - Tivoli Enterprise Portal integrationmessages . . . . . . . . . . . . . . . 103AWKTPM - Tivoli Provisioning Manager messages 108AWKTSA - Tivoli Workload Scheduler Bridgemessages . . . . . . . . . . . . . . . 109AWKTSS - Time scheduler . . . . . . . . . 113AWKWSE - Web services job executor messages 122AWKXAJ - Extended agent job executor messages 123AWKZSJ - z/OS shadow job validation messages 124AWSAEM - Event management messages . . . . 125AWSAHL - Action helper messages . . . . . . 126AWSBAT - Event counter messages . . . . . . 127AWSBCT - Utility program messages . . . . . 130AWSBCU - SSL messages (symaccs) . . . . . . 131AWSBCV - Mailman messages . . . . . . . 132AWSBCW - Writer messages . . . . . . . . 143AWSBCX - Monman messages . . . . . . . 148AWSBCZ - Dload messages . . . . . . . . 151AWSBDB - Scribner messages . . . . . . . . 153AWSBDC - NetView/OpenView messages. . . . 154AWSBDG - Downloader messages . . . . . . 155AWSBDJ - Appserverman messages . . . . . . 159AWSBDW - Jobman messages . . . . . . . . 161AWSBDX - Jobtable access messages. . . . . . 170AWSBDY - Mailbox messages . . . . . . . . 172AWSBEC - Report headers and subheadersmessages . . . . . . . . . . . . . . . 173AWSBEE - Parms messages. . . . . . . . . 174AWSBEG - Ftbox messages . . . . . . . . . 175AWSBEH - Web library messages. . . . . . . 176AWSBEI - Users program messages . . . . . . 183AWSBHT - Batchman messages . . . . . . . 185AWSBHU - Conman messages. . . . . . . . 196AWSBHV - Stageman messages . . . . . . . 230AWSBHW - Object parsing messages . . . . . 237AWSBHX - Logman messages . . . . . . . . 240AWSBHZ - Schedulr messages . . . . . . . 241AWSBIA - Composer messages . . . . . . . 244AWSBIB - Scheduling language parser messages 259AWSBID - Compiler messages . . . . . . . . 270AWSBII - General and miscellaneous messages . . 275AWSBIN - Plan libraries messages . . . . . . 276AWSBIO - Comm_api messages . . . . . . . 280AWSBIP - Connector messages . . . . . . . 282AWSBIS - Customize messages . . . . . . . 283AWSBIY - Demo scripts messages . . . . . . 290AWSBJG - Router messages . . . . . . . . 291AWSBJH - Migration messages . . . . . . . 293AWSBRC - Batch report command line messages 297AWSBWX - Dataxtract messages . . . . . . . 301AWSCCM - CCMDB integration messages. . . . 303

© Copyright IBM Corp. 2001, 2012 iii

AWSCDW - Clustering messages . . . . . . . 304AWSDDW - Std utility messages . . . . . . . 311AWSDEB - SSL messages . . . . . . . . . 312AWSDEC - Events file messages . . . . . . . 316AWSDEJ - Security messages . . . . . . . . 319AWSDEK - Miscellaneous command messages . . 330AWSDEM - Workstation parsing messages . . . 332AWSDEQ - FIFO messages . . . . . . . . . 343AWSDEU - Utilities library list messages . . . . 344AWSDEV - TIS library messages . . . . . . . 345AWSDFH - Condition expression parsing messages 346AWSECM - Event Configuration messages . . . 348AWSEDW - Netman messages. . . . . . . . 349AWSERB - Event rule builder messages . . . . 356AWSERP - Event rule parser messages . . . . . 357AWSETO - Object monitor plug-in messages . . . 359AWSEVP - Event processing messages . . . . . 361AWSFMP - File monitor plug-in messages . . . . 362AWSFWD - Tivoli Enterprise Console eventforwarder plug-in messages . . . . . . . . 363AWSGAP - Generic action messages . . . . . . 364AWSGEP - Generic event plug-in messages . . . 365AWSGTW - Gentwsevn messages . . . . . . 366AWSITA - Job management messages . . . . . 368AWSJCL - Command line messages . . . . . . 385AWSJCO - Connectors messages . . . . . . . 400AWSJCS - Common services messages . . . . . 424AWSJDB - Common objects messages . . . . . 429AWSJMC - Job manager REST client messages . . 440AWSJMR - Job management for REST servicesmessages . . . . . . . . . . . . . . . 441AWSJOM - Object management messages . . . . 442AWSJPL - Planner messages . . . . . . . . 457AWSJSY - Symphony file processing messages . . 476AWSMSL - Message logger plug-in messages. . . 481AWSMSP - Mail sender plug-in messages . . . . 482AWSPMG - Plug-in manager messages . . . . . 483AWSREP - Plan extractor messages . . . . . . 484AWSRES - Common REST messages . . . . . 486AWSRJM - Remote job manager messages . . . . 487AWSRST - Distributed REST messages . . . . . 488AWSTAP - Action plug-in messages . . . . . . 489AWSTEL - EIF event management messages . . . 491AWSTMB - Mailbox messages . . . . . . . . 492AWSTPL - Time planner messages . . . . . . 493AWSVAL - Plug-in validator messages . . . . . 495AWSZAP - Action plug-in for z/OS messages . . 499

Chapter 2. Installation, uninstallation,and upgrade messages . . . . . . . 501AWSFAB - Installation messages (twsinst) . . . . 501AWSFAF - Installation messages (fix pack) . . . 523

iv IBM Tivoli Workload Automation: Messages and Codes

AWSJIC - Installation (InstallShield wizard)common messages. . . . . . . . . . . . 527AWSJIS - Installation (InstallShield wizard)messages . . . . . . . . . . . . . . . 533AWSSAM - Installation messages (Tivoli SystemAutomation for Multi Platform) . . . . . . . 588

Chapter 3. Tivoli Workload Schedulerdistributed - Agent for z/OS messages 589

Part 2. Tivoli Workload Schedulerfor z/OS messages and codes. . . 633

Chapter 4. Tivoli Workload Schedulerfor z/OS messages and codes . . . . 635Tivoli Workload Scheduler for z/OS messageformat. . . . . . . . . . . . . . . . 635Where messages are presented . . . . . . . 636Data entry errors . . . . . . . . . . . . 637

System action . . . . . . . . . . . . 637User response . . . . . . . . . . . . 637

Chapter 5. AWSJZC - z/OS Connectormessages . . . . . . . . . . . . . 639

Chapter 6. AWSJZI - z/OS Connectorinstallation messages . . . . . . . . 643

Chapter 7. EQQnnnn messages . . . 681

Chapter 8. EQQAnnn messages . . . 731

Chapter 9. EQQCnnn messages . . . 757

Chapter 10. EQQCLnnn messages 763

Chapter 11. EQQCNnnn messages 779

Chapter 12. EQQCPnnn messages 781

Chapter 13. EQQDnnn messages . . . 783

Chapter 14. EQQEnnn messages . . . 787

Chapter 15. EQQEXnn messages . . . 807

Chapter 16. EQQFnnn messages . . . 809

Chapter 17. EQQFxxx messages . . . 811

Chapter 18. EQQGnnn messages . . . 839

Chapter 19. EQQHnnn messages . . . 843

Chapter 20. EQQHMnn messages. . . 849

Chapter 21. EQQHTnn messages . . . 851

Chapter 22. EQQICnn messages . . . 859

Chapter 23. EQQIPnn messages . . . 867

Chapter 24. EQQJnnn messages . . . 871

Chapter 25. EQQKnnn messages . . . 889

Chapter 26. EQQLnnn messages . . . 893

Chapter 27. EQQMnnn messages . . . 901

Chapter 28. EQQNnnn messages . . . 953

Chapter 29. EQQOnnn messages . . . 969

Chapter 30. EQQOCnn messages . . . 971

Chapter 31. EQQPnnn messages . . . 975

Chapter 32. EQQQnnn messages . . . 989

Chapter 33. EQQRnnn messages . . . 995

Chapter 34. EQQREnn messages 1003

Chapter 35. EQQRMnn messages 1005

Chapter 36. EQQSnnn messages 1009

Chapter 37. EQQSUnn messages 1013

Chapter 38. EQQTnnn messages 1019

Chapter 39. EQQUnnn messages 1023

Chapter 40. EQQVnnn messages 1025

Chapter 41. EQQWnnn messages 1031

Chapter 42. EQQWLnn messages 1065

Chapter 43. EQQXnnn messages 1069

Chapter 44. EQQYnnn messages 1137

Chapter 45. EQQZnnn messages 1157

Chapter 46. Abend codes . . . . . . 1187

Chapter 47. Reason codes . . . . . 1189

Contents v

Reason Codes for EQQXnnn, EQQAnnn,EQQGnnn, EQQKnnn and EQQMnnn . . . . . 1189Reason Codes for EQQY050E. . . . . . . . 1195Reason Codes for EQQFAxx . . . . . . . . 1197Reason Codes for EQQAxxx . . . . . . . . 1198

Chapter 48. Batch program codesand messages . . . . . . . . . . 1201EQQPDLF batch program condition codes . . . 1201EQQPURGE batch program WTO messages . . . 1201

Chapter 49. SSL errors . . . . . . . 1203

Part 3. Dynamic WorkloadConsole messages . . . . . . . 1205

Chapter 50. Installation anduninstallation messages . . . . . . 1207Installation (InstallShield wizard) messages of theDynamic Workload Console - UI (001–099) . . . 1207

Chapter 51. UI - Dynamic WorkloadConsole messages . . . . . . . . 1219Dynamic Workload Console message set ranges 1219User interface messages . . . . . . . . . 1220Event management messages. . . . . . . . 1293Modelling messages . . . . . . . . . . . 1295

Ajax messages. . . . . . . . . . . . . 1304Table messages . . . . . . . . . . . . 1305Graphical functions messages . . . . . . . 1307Dynamic Workload Console widgets messages 1308

Part 4. Tivoli Workload Schedulerfor Applications messages . . . . 1311

Chapter 52. Tivoli WorkloadScheduler for Applicationsmessages . . . . . . . . . . . . 1313IBM Tivoli message format . . . . . . . . 1313

Message number . . . . . . . . . . . 1313Message text . . . . . . . . . . . . 1315Message help . . . . . . . . . . . . 1315

z/OS gateway messages - I . . . . . . . . 1316PeopleSoft access method messages - N . . . . 1322SAP R/3 access method messages - O . . . . . 1324Oracle access method messages - P . . . . . . 1365Applications installer messages - EEWAI . . . . 1366Plug-in installer messages - EEWAI. . . . . . 1368PeopleSoft access method messages - HTWGT 1370

Notices . . . . . . . . . . . . . 1373Trademarks . . . . . . . . . . . . . 1374

Index . . . . . . . . . . . . . . 1377

vi IBM Tivoli Workload Automation: Messages and Codes

List of tables

1. Dynamic Workload Console error andwarning messages code ranges . . . . . 1219

2. Tivoli Workload Scheduler for Applicationsmessages - component codes . . . . . . 1313

3. z/OS module names. . . . . . . . . 1316

© Copyright IBM Corp. 2001, 2012 vii

viii IBM Tivoli Workload Automation: Messages and Codes

About this publication

Tivoli Workload Automation: Messages and Codes provides help for error and warningmessages issued by the Tivoli Workload Automation products: Tivoli WorkloadScheduler (often called the engine), Tivoli Workload Scheduler for z/OS, theDynamic Workload Console, and Tivoli Workload Scheduler for Applications.

What is new in this releaseFor information about the new or changed functions in this release, see TivoliWorkload Automation: Overview.

For information about the APARs that this release addresses, see the TivoliWorkload Scheduler Download Documents at http://www.ibm.com/support/docview.wss?rs=672&uid=swg24027501, and Dynamic Workload ConsoleDownload Documents at http://www.ibm.com/support/docview.wss?rs=672&uid=swg24029125.

What is new in this publicationThis section describes what has changed in this publication.v All messages issued by the Tivoli Workload Automation products are now

documented in this manual.v The following new subcomponent message sets have been added to Part 1:

BRC Batch report command line

CGE Cognos Plug-in

DBE Database job executor

DSE InfoSphere DataStage Plug-in

DSJ Distributed shadow job validation

EXE Executable job executor

FTE File transfer job executor

IIE IBM iconic job executor

IPC Informatica PowerCenter Plug-in

ITM ITM scanner

JJE Java job executor

JMC Job manager REST client

JPM Planbox

PIC SAP Process Integrator

RES Common REST

RJM Remote job manager

RST Distributed REST

SAM Tivoli System Automation for Multiplatforms

SPI Scheduler SPI

© Copyright IBM Corp. 2001, 2012 ix

||

http://www.ibm.com/support/docview.wss?rs=672&uid=swg24027501http://www.ibm.com/support/docview.wss?rs=672&uid=swg24027501http://www.ibm.com/support/docview.wss?rs=672&uid=swg24029125http://www.ibm.com/support/docview.wss?rs=672&uid=swg24029125

WSE Web services job executor

XAJ Extended agent job executor

ZAP Action plug-in for z/OS

ZSJ z/OS shadow job validationv Messages for Tivoli Workload Scheduler distributed - Agent for z/OS have been

added to Part 1.

Who should read this publicationThis publication is designed to help users understand any error or warningmessages they encounter while working with Tivoli Workload Scheduler, TivoliWorkload Scheduler for z/OS, the Dynamic Workload Console. and TivoliWorkload Scheduler for Applications.

The help consists of an explanation of what has happened (where the messageitself requires further explanation), the action that the system has taken, and theresponse that the user must provide. These details do not appear online with themessage texts, and are documented only in this publication.

Introduction to messagesThis publication provides help for error or warning messages that are encounteredwhile working with Tivoli Workload Scheduler, Tivoli Workload Scheduler forz/OS, the Dynamic Workload Console, and Tivoli Workload Scheduler forApplications.

This publication is divided into the following parts:

Part 1 - Tivoli Workload Scheduler messagesThis section contains messages for the following products and components:v Tivoli Workload Schedulerv Tivoli Workload Scheduler distributed - Agent for z/OS

Part 2- Tivoli Workload Scheduler for z/OS messagesThis section contains messages for Tivoli Workload Scheduler for z/OS:

Part 3 - Dynamic Workload Console messagesThis section contains messages for Dynamic Workload Console:

Part 4 - Tivoli Workload Scheduler for Applications messagesThis section contains messages for Tivoli Workload Scheduler forApplications

PublicationsFull details of Tivoli Workload Automation publications can be found in TivoliWorkload Automation: Publications, . This document also contains information on theconventions used in the publications.

A glossary of terms used in the product can be found in Tivoli Workload Automation:Glossary, .

Both of these are in the Information Center as separate publications.

What is new

x IBM Tivoli Workload Automation: Messages and Codes

AccessibilityAccessibility features help users with a physical disability, such as restrictedmobility or limited vision, to use software products successfully. With this product,you can use assistive technologies to hear and navigate the interface. You can alsouse the keyboard instead of the mouse to operate all features of the graphical userinterface.

For full information with respect to the Dynamic Workload Console, see theAccessibility Appendix in the Tivoli Workload Scheduler: User's Guide and Reference,SC32-1274.

Tivoli technical trainingFor Tivoli® technical training information, refer to the following IBM® TivoliEducation website:

http://www.ibm.com/software/tivoli/education

Support informationIf you have a problem with your IBM software, you want to resolve it quickly. IBMprovides the following ways for you to obtain the support you need:

OnlineGo to the IBM Software Support site at http://www.ibm.com/software/support/probsub.html and follow the instructions.

IBM Support AssistantThe IBM Support Assistant (ISA) is a free local software serviceabilityworkbench that helps you resolve questions and problems with IBMsoftware products. The ISA provides quick access to support-relatedinformation and serviceability tools for problem determination. To installthe ISA software, go to http://www.ibm.com/software/support/isa.

Troubleshooting GuideFor more information about resolving problems, see the problemdetermination information for this product.

For more information about these three ways of resolving problems, see theappendix on support information in Tivoli Workload Scheduler: Troubleshooting Guide,SC32-1275.

Accessibility

About this publication xi

http://www.ibm.com/software/tivoli/educationhttp://www.ibm.com/software/support/probsub.htmlhttp://www.ibm.com/software/support/probsub.htmlhttp://www.ibm.com/software/support/isa

Support information

xii IBM Tivoli Workload Automation: Messages and Codes

Part 1. Tivoli Workload Scheduler messages

Chapter 1. Tivoli Workload Scheduler messages . 5Tivoli Workload Scheduler message format . . . . 5

Message number . . . . . . . . . . . . 5Message text . . . . . . . . . . . . . 6Message help . . . . . . . . . . . . . 7

AWKALR - Allocation repository messages . . . . 8AWKAUD - Audit service messages . . . . . . 9AWKCAL - Calendar . . . . . . . . . . . 11AWKCDM - Change and configuration managementdatabase messages . . . . . . . . . . . . 13AWKCGE - Cognos Plug-in messages . . . . . 15AWKCLI - Command line messages . . . . . . 20AWKDBE - Database Job Executor messages . . . 26AWKDSE - InfoSphere DataStage Plug-in messages 28AWKEJE - Enterprise Java Bean . . . . . . . 31AWKEWL - Enterprise workload manager messages 34AWKEXE - Executable Job Executor messages . . . 36AWKFTE - File transfer Job Executor messages . . 38AWKICA - Calendar messages . . . . . . . . 41AWKIIE - IBM iconic Job Executor messages . . . 42AWKIPC - Informatica PowerCenter Plug-inmessages . . . . . . . . . . . . . . . 43AWKITM - ITM scanner messages . . . . . . . 46AWKJBN - Job definition base notify servicemessages . . . . . . . . . . . . . . . 48AWKJDD - Job definition service messages . . . . 49AWKJDE - Job dispatcher messages . . . . . . 50AWKJEJ - WebSphere Java 2 Enterprise Edition jobexecutor for CAS . . . . . . . . . . . . 68AWKJJE - Java job executor messages. . . . . . 71AWKJNT - Job definition notify service messages. . 72AWKJSD - Job Submission Description Languageeditor messages . . . . . . . . . . . . . 73AWKJSV - Job definition service messages . . . . 78AWKPIC - SAP Process Integrator messages . . . 79AWKRAA - Resource advisor agent . . . . . . 81AWKRAE - Resource Advisor EJB messages . . . 82AWKRRP - Resource repository messages . . . . 88AWKRSE - Resource advisor agent cache messages 96AWKSED - Job repository data access objectmessages . . . . . . . . . . . . . . . 97AWKSPI - Scheduler SPI messages . . . . . . 99AWKSUL - Utility messages . . . . . . . . 100AWKTEP - Tivoli Enterprise Portal integrationmessages . . . . . . . . . . . . . . . 103AWKTPM - Tivoli Provisioning Manager messages 108AWKTSA - Tivoli Workload Scheduler Bridgemessages . . . . . . . . . . . . . . . 109AWKTSS - Time scheduler . . . . . . . . . 113AWKWSE - Web services job executor messages 122AWKXAJ - Extended agent job executor messages 123AWKZSJ - z/OS shadow job validation messages 124AWSAEM - Event management messages . . . . 125AWSAHL - Action helper messages . . . . . . 126AWSBAT - Event counter messages . . . . . . 127AWSBCT - Utility program messages . . . . . 130

AWSBCU - SSL messages (symaccs) . . . . . . 131AWSBCV - Mailman messages . . . . . . . 132AWSBCW - Writer messages . . . . . . . . 143AWSBCX - Monman messages . . . . . . . 148AWSBCZ - Dload messages . . . . . . . . 151AWSBDB - Scribner messages . . . . . . . . 153AWSBDC - NetView/OpenView messages. . . . 154AWSBDG - Downloader messages . . . . . . 155AWSBDJ - Appserverman messages . . . . . . 159AWSBDW - Jobman messages . . . . . . . . 161AWSBDX - Jobtable access messages. . . . . . 170AWSBDY - Mailbox messages . . . . . . . . 172AWSBEC - Report headers and subheadersmessages . . . . . . . . . . . . . . . 173AWSBEE - Parms messages. . . . . . . . . 174AWSBEG - Ftbox messages . . . . . . . . . 175AWSBEH - Web library messages. . . . . . . 176AWSBEI - Users program messages . . . . . . 183AWSBHT - Batchman messages . . . . . . . 185AWSBHU - Conman messages. . . . . . . . 196AWSBHV - Stageman messages . . . . . . . 230AWSBHW - Object parsing messages . . . . . 237AWSBHX - Logman messages . . . . . . . . 240AWSBHZ - Schedulr messages . . . . . . . 241AWSBIA - Composer messages . . . . . . . 244AWSBIB - Scheduling language parser messages 259AWSBID - Compiler messages . . . . . . . . 270AWSBII - General and miscellaneous messages . . 275AWSBIN - Plan libraries messages . . . . . . 276AWSBIO - Comm_api messages . . . . . . . 280AWSBIP - Connector messages . . . . . . . 282AWSBIS - Customize messages . . . . . . . 283AWSBIY - Demo scripts messages . . . . . . 290AWSBJG - Router messages . . . . . . . . 291AWSBJH - Migration messages . . . . . . . 293AWSBRC - Batch report command line messages 297AWSBWX - Dataxtract messages . . . . . . . 301AWSCCM - CCMDB integration messages. . . . 303AWSCDW - Clustering messages . . . . . . . 304AWSDDW - Std utility messages . . . . . . . 311AWSDEB - SSL messages . . . . . . . . . 312AWSDEC - Events file messages . . . . . . . 316AWSDEJ - Security messages . . . . . . . . 319AWSDEK - Miscellaneous command messages . . 330AWSDEM - Workstation parsing messages . . . 332AWSDEQ - FIFO messages . . . . . . . . . 343AWSDEU - Utilities library list messages . . . . 344AWSDEV - TIS library messages . . . . . . . 345AWSDFH - Condition expression parsing messages 346AWSECM - Event Configuration messages . . . 348AWSEDW - Netman messages. . . . . . . . 349AWSERB - Event rule builder messages . . . . 356AWSERP - Event rule parser messages . . . . . 357AWSETO - Object monitor plug-in messages . . . 359AWSEVP - Event processing messages . . . . . 361AWSFMP - File monitor plug-in messages . . . . 362

© Copyright IBM Corp. 2001, 2012 1

AWSFWD - Tivoli Enterprise Console eventforwarder plug-in messages . . . . . . . . 363AWSGAP - Generic action messages . . . . . . 364AWSGEP - Generic event plug-in messages . . . 365AWSGTW - Gentwsevn messages . . . . . . 366AWSITA - Job management messages . . . . . 368AWSJCL - Command line messages . . . . . . 385AWSJCO - Connectors messages . . . . . . . 400AWSJCS - Common services messages . . . . . 424AWSJDB - Common objects messages . . . . . 429AWSJMC - Job manager REST client messages . . 440AWSJMR - Job management for REST servicesmessages . . . . . . . . . . . . . . . 441AWSJOM - Object management messages . . . . 442AWSJPL - Planner messages . . . . . . . . 457AWSJSY - Symphony file processing messages . . 476AWSMSL - Message logger plug-in messages. . . 481AWSMSP - Mail sender plug-in messages . . . . 482AWSPMG - Plug-in manager messages . . . . . 483AWSREP - Plan extractor messages . . . . . . 484AWSRES - Common REST messages . . . . . 486AWSRJM - Remote job manager messages . . . . 487AWSRST - Distributed REST messages . . . . . 488AWSTAP - Action plug-in messages . . . . . . 489AWSTEL - EIF event management messages . . . 491AWSTMB - Mailbox messages . . . . . . . . 492AWSTPL - Time planner messages . . . . . . 493AWSVAL - Plug-in validator messages . . . . . 495AWSZAP - Action plug-in for z/OS messages . . 499

Chapter 2. Installation, uninstallation, andupgrade messages . . . . . . . . . . . 501AWSFAB - Installation messages (twsinst) . . . . 501AWSFAF - Installation messages (fix pack) . . . 523

2 IBM Tivoli Workload Automation: Messages and Codes

AWSJIC - Installation (InstallShield wizard)common messages. . . . . . . . . . . . 527AWSJIS - Installation (InstallShield wizard)messages . . . . . . . . . . . . . . . 533AWSSAM - Installation messages (Tivoli SystemAutomation for Multi Platform) . . . . . . . 588

Chapter 3. Tivoli Workload Schedulerdistributed - Agent for z/OS messages . . . . 589

Part 1. Tivoli Workload Scheduler messages 3

Chapter 1. Tivoli Workload Scheduler messages

This part contains message help for many of the messages issued by the TivoliWorkload Scheduler engine and command line. The messages are organized inalphabetical order of message within alphabetical order of subcomponent (messageset). Each subcomponent is in a separate section.

If the information does not sufficiently explain the situation you have encountered,you should consult the Tivoli Workload Scheduler: Troubleshooting Guide, which hasextended error scenarios for many situations, as well as information aboutdiagnostic tools and how to obtain support.

Tivoli Workload Scheduler message formatThis section explains the format of the message that is displayed on your screen orwritten in a log file. All messages have a message number and a message text.Many of the error and warning messages also have help. Only messages withmessage help are documented in this part of the guide. The help consists of anexplanation of the message, a description of what the system does, andinformation about what you must do to resolve the problem.

These items are described in more detail in the following sections.

Message numberTivoli Workload Scheduler message numbers (codes) have the following format:AWS

where the parts of the message are as follows:

AWS The product prefix. This value is used for all Tivoli Workload Schedulermessages, except those of the z/OS® Connector, which use EQQ (theproduct code for IBM Tivoli Workload Manager for z/OS).

The three-digit (occasionally two-digit) alphabetic code for the TivoliWorkload Scheduler component, for example "BAT".

A three-digit (occasionally four-digit) numeric identifier that is uniquewithin any combination of prefix and component code.

The severity indicator, as follows:

I Informational: Informational messages provide users withinformation or feedback about normal events that have occurred orare occurring, or request information from users in cases where theoutcome is not negative, regardless of the response.

Examples:v The status request is processing.v The files were successfully transferred.v Do you want to save your output in file a or in file b?

© Copyright IBM Corp. 2001, 2012 5

Note: Informational messages issued by Tivoli Workload Schedulerare not documented in this guide, as they are complete inthemselves and require no further information orexplanation. This also applies to informational messagesgiving the usage of the product’s commands – if you requiremore information than is given on the screen, refer to TivoliWorkload Scheduler: User's Guide and Reference.

W Warning: Warning messages indicate that potentially undesirableconditions have occurred or could occur, but the program cancontinue. Warning messages often ask users to make decisionsbefore processing continues.

Examples:v The replay table could not be sent. The link to Agent_name

proceeds with a reduced replay protocol.v A file already exists with the same name. Do you want to

overwrite this file?

E Error: Error messages indicate problems that require interventionor correction before the program can continue.

Examples:v The specified file could not be found.v You are out of space on the x drive. The file cannot be saved to

this drive.

An example of an error message number is as follows:AWSBAT003E

Message textEvery attempt has been made to represent the message text exactly as it appears tothe user in the displayed or written message. Any differences that occur areusually occasioned by the different layout of the book (in two columns) withrespect to the message display panel or log.

Where the system has included variable information in the message text, thisvariable information is represented in this guide by an italicized label, describingthe type of information referred to by the variable.

For example, if the message text that appears on your screen is as follows:The replay table could not be sent.The link to TRC8470 proceeds with a reduced replay protocol.

the message text shown in the guide would be as follows:The replay table could not be sent.The link to Agent_name proceeds with a reduced replay protocol.

In this case the label Agent_name tells you that the information that is inserted bythe system is the name of the agent which could not receive the replay table.

Message format


Message helpIn Chapter 1, “Tivoli Workload Scheduler messages,” on page 5 you can find helpfor many of the more important error and warning messages. This help providesthe following:

ExplanationAn explanation, where necessary, of the message text.

System actionA description of what the system or process does as a result of thecondition that caused the message.

Operator responseWhat you must do in response to the condition that caused the message.

See alsoA reference to any Tivoli Workload Scheduler publication that might helpyou understand or resolve the problem.

Message format

Chapter 1. Tivoli Workload Scheduler messages 7

AWKALR - Allocation repository messagesThis section lists error and warning allocation repository messages that could beissued.

The message component code is ALR.

AWKALR001E Unable to create the JSDL string fromthe SDO.

Explanation: See message text.

System action: The operation is not performed.

Operator response: The error message points the userto the root cause of the problem.

AWKALR002E Unable to create the EPR string fromthe SDO.




AWKALR003E No resources are available fordeletion for allocation ID:"allocationID".




AWKALR004E No allocation is available for deletionfor allocation ID:"allocationID".




AWKALR005E Unable to find any resources forallocation ID:"allocationID".


System action: None

Operator response: Check the allocation ID and tryagain

AWKALR006E Unable to create the JSDL from thestring.



Operator response: The error message points the user

to the root cause of the problem.

AWKALR007E Unable to create the EPR from thestring.




AWKALR081E Unable to create an allocation recordin the allocation repository database.


System action: None

Operator response: Check the error log forinformation about cause of the database access failure.

AWKALR001E • AWKALR081E


AWKAUD - Audit service messagesThis section lists error and warning audit service messages that could be issued.

The message component code is AUD.

AWKAUD050W The audit property setting"property_name" is not specified or isblank in the auditing configuration file.Using the default value: "default_value".


System action: The operation is performed using thedefault value.

Operator response: None.

AWKAUD051W The directory name specified in theaudit property "property_name" is notvalid. Using default value:"default_value".




AWKAUD052W The audit file prefix "prefix_value" isnot valid or the auditing file path is toolong. Using the default value"default_value".




AWKAUD053W The audit file prefix is not specifiedor is blank. Using the default value"default_value".




AWKAUD054W The audit property "property_name" isnot valid, is negative, or exceeds themaximum supported value. Using themaximum value as default default_value.




AWKAUD100E Unable to find the auditconfiguration file "audit_file_path". Usingthe default configuration settings.

Explanation: The auditing configuration file does notexist or is not readable. Default configuration settingsare used.

System action: The operation is performed using thedefault settings.

Operator response: Check that the audit configurationfile exists and that is readable. Create a new auditconfiguration file if it is missing.

AWKAUD101E Unable to instantiate the "audit_type"event type.

Explanation: The audit service is unable to instantiatethe specified event type. The class path might becorrupted.


Operator response: Verify the installation and checkwhether the jar files have been deleted.

AWKAUD102E Unable to instantiate the"provider_name" Auditing Event Provider.

Explanation: The audit service is trying to instantiatean unknown or unsupported Auditing Event Provider.


Operator response: Check whether an unsupportedAuditing Event Provider is specified in the auditconfiguration file.

AWKAUD103E Unable to log the "event_type" auditevent type.

Explanation: The audit service is unable to processevents of the specified type.


Operator response: Check whether an unsupportedauditing event consumer is specified in the auditconfiguration file.

AWKAUD104E Unable to process the "event_type"audit event type.



AWKAUD050W • AWKAUD104E


Operator response: The file system might be full orthe audit log file is not write-protected.

AWKAUD105E Unable to use the directory specifiedfor audit logs. The specified path andthe filename might exceed the maximumlength for files in the current operatingsystem. Using: "new_file_location".


System action: The operation is performed using thefile name and path specified in the message.

Operator response: The file system might be full orthe auditing log file is write-protected.

AWKAUD105E


AWKCAL - CalendarThis section lists error and warning messages that could be issued by the Calendarfunctions.

The message component code is CAL.

AWKCAL001E The specified start date and timestartDateTime is greater than the end dateand timeendDateTime.

Explanation: You asked to calculate the list of datesmatched by this calendar in a specified interval, but thespecified start date and time of this interval is greaterthan the end date and time.

System action: The list of matching dates is notreturned.

Operator response: Specify the correct values for thestart and end date and time.

AWKCAL002E The specified start date and timestartDateTime is greater than the end dateand timeendDateTime.

Explanation: The start date and time you havespecified for the time interval during which a calendaris valid is greater than the corresponding end date andtime.

System action: The Calendar object is not created.

Operator response: Specify the correct values for thecalendar validity interval start and end date and time.

AWKCAL003E At least one start date and time mustbe specified for the calendar or therecursion rule. Rule = inclusionRule.

Explanation: When you define a recursion rule, youmust specify a start date and time, either at the rulelevel or at the calendar level.


Operator response: Specify the start date and timeeither at rule or calendar level.

AWKCAL004E The format of the crontab string isincorrect: Message_exception.

Explanation: The format of the crontab stringprovided in input to the calendar constructor isincorrect or does not comply with the crontab syntaxrules.


Operator response: Review the crontab string andensure that it complies with a valid crontab rule.

AWKCAL005E The string containing the list of datesis incorrectMessage_exception.

Explanation: The format of the string containing thelist of dates provided in input to the calendarconstructor is incorrect or does not comply to theyyyymmdd-hh:mm, [yyyymmdd-hh:mm] syntax.


Operator response: Review the string and ensure thatit complies with the syntax specified in the messageexplanation.

AWKCAL006E Cannot specify the starting hour in arecurring rule of the following type:type.

Explanation: You specified a starting hour in arecurring calendar rule that does not support thisfeature, for example, in an hourly rule.

System action: The recurring rule is not created

Operator response: Use the setStartDateTime() methodof the rule or of the entire Calendar to specify the hourand minutes from which an hourly rule must start.

AWKCAL007E Cannot specify a weekday in arecurring rule of the following type:type.

Explanation: You specified a weekday (for example,Monday, Friday) in a recurring calendar rule that doesnot support weekdays, for example, in amonthly-by-date or in a daily or yearly rule.


Operator response: Do not specify a weekday whendefining a recurring rule of the following types: daily,monthly by date or yearly.

AWKCAL008E Cannot specify a weekday with anoffset in a recurring rule of thefollowing type: type.

Explanation: You specified a weekday offset (forexample, 3nd Monday, or 2nd-last Friday) in arecurring calendar rule that does not support weekdaysoffsets, for example, in a daily, weekly, or yearly rule.


Operator response: Do not specify a weekday offsetwhen defining a weekly rule (for example, every 3weeks), a daily rule (for example, every 4 days), or ayearly rule (for example, every year).

AWKCAL001E • AWKCAL008E


AWKCAL009E Cannot specify a day of the month ina recurring rule of the following type:type.

Explanation: You specified a day of the month (forexample, 2, 15, 19, 27) in a recurring calendar rule thatdoes not support month days, for example, in a daily,weekly, or monthly-by-weekday rule.


Operator response: Do not specify a month day whendefining a weekly rule (for example, every 3 weeks), adaily rule (for example, every 4 days), or amonthly-by-day rule (for example, every 3 months onthe 2nd Monday of the month).

AWKCAL010E Cannot specify a month of the year ina recurring rule of the following type:type.

Explanation: You specified a month (for example,February) in a recurring calendar rule that does notallow you to specify the month, for example, a yearlyrule.


Operator response: Do not specify months on a yearlyrule. To set the start date and time of the yearly rule,set the start date and time either in the rule definitionor at the calendar level.

AWKCAL011E Cannot specify a day of the year in arecurring rule of the following type:type.

Explanation: You specified a day of the year (forexample, day 239) in a recurring calendar rule thatdoes not support days of the year, for example, a dailyor weekly or monthly rule.


Operator response: Do not specify a year of the daywhen defining a weekly rule (for example, every 3weeks), a daily rule (for example, every 4 days), or amonthly-by-day or by-date rule.

AWKCAL012E The recurring rule is incorrect: itcontains neither a start date and timenor a specific hour-minute keyword.

Explanation: A recurring rule must contain at least astart date and time value, or an hour and minute value.


Operator response: Ensure that the recurring rulecontains at least a start date and time value, or an hourand minute value.

AWKCAL018E The specified crontab string isincorrect because it contains too manytokens: crontab_string.

Explanation: The format of the crontab stringprovided in input to the calendar constructor isincorrect because it contains too many tokens. Youcannot concatenate crontab strings.


Operator response: Review the crontab string andensure that it complies with a valid crontab rule.

AWKCAL009E • AWKCAL018E


AWKCDM - Change and configuration management databasemessages

This section lists error and warning change and configuration management databasemessages that could be issued.

The message component code is CDM.

AWKCDM001W An error occurred while loading theuser configuration file "config_file". Thefollowing error was returned: "error".The default values will be used.

Explanation: The configuration file cannot be readfrom the Tivoli Dynamic Workload Brokerconfiguration directory.

System action: See message text.

Operator response: Check whether the configurationfile located in the Tivoli Dynamic Workload Brokerconfiguration directory is corrupted, locked, or missing.

AWKCDM002E An error occurred while getting theconfiguration file "config_file". Thefollowing error was returned: "error".

Explanation: The configuration file cannot be found inthe Tivoli Dynamic Workload Broker jar files.

System action:

Operator response: Check whether the jar files in theTivoli Dynamic Workload Broker installation directoryare corrupted or missing. If you cannot resolve theproblem, search the IBM Support database for asolution at http:// www.ibm.com/software/sysmgmt/products/support.

AWKCDM003E Unable to find the configuration file"config_file" .


System action: None

Operator response: Check whether the jar files in theTivoli Dynamic Workload Broker installation directoryare corrupted or missing. If you cannot resolve theproblem, search the IBM Support database for asolution at http:// www.ibm.com/software/sysmgmt/products/support.

AWKCDM005E An exception occurred on theCCMDB server. The following error wasreturned: "error".


System action:

Operator response: Check that the Tivoli Change andConfiguration Management Database server is up andrunning and that it can be contacted.

AWKCDM006E The operation failed because therequired parameter "parameter" ismissing. Include it in the command orin the configuration file.



Operator response: Specify the required parameter.

AWKCDM007E The command failed because itincluded an unsupported parameter"parameter".


System action:

Operator response: Check the command syntax andretry the operation.

AWKCDM008E The operation failed because theURL specified for the Tivoli DynamicWorkload Broker server URLis notcorrect.



Operator response: Correct the URL.

AWKCDM009E A problem occurred while contactingthe Tivoli Dynamic Workload Brokerserver. The Tivoli Dynamic WorkloadBroker service is not available.



Operator response: Check that the Tivoli DynamicWorkload Broker server is up and running and that itcan be contacted.

AWKCDM010E Unable to invoke Tivoli DynamicWorkload Broker Web Services becausean incorrect parameter was specified.


System action: The operation was not performed.

Operator response: Check the parameters and tryagain.

AWKCDM001W • AWKCDM010E


AWKCDM011E Unable to invoke Tivoli DynamicWorkload Broker Web Services.



Operator response:

AWKCDM012E Unable to connect to the TivoliDynamic Workload Broker server. Theuser credentials might be incorrect.



Operator response: Check the user name andpassword and retry the operation.

AWKCDM013E The operation failed because theuser is not authorized to perform it.



Operator response: Log on with the required level ofauthorization and retry the operation.

AWKCDM014E An unexpected error occurred.



Operator response: Check the trace file for moreinformation about the error.

AWKCDM011E • AWKCDM014E


AWKCGE - Cognos Plug-in messagesThis section lists error and warning messages that could be issued by the CognosPlug-in component.

The message component code is CGE.

AWKCGE001E You did not specify the report path.

Explanation: The report path is a required parameter.


Operator response: Provide the report path and retrythe operation.

AWKCGE002E You did not specify the namespace.

Explanation: The namespace is a required parameterto view the list of reports.


Operator response: Provide the namespace either hereor in the CognosJobExecutor.properties file and retrythe operation.

AWKCGE003E You did not specify the username.

Explanation: The username is a required parameter toview the list of reports.


Operator response: Provide the username either hereor in the CognosJobExecutor.properties file and retrythe operation.

AWKCGE004E You did not specify the password.

Explanation: The password is a required parameter toview the list of reports.


Operator response: Provide the password either hereor in the CognosJobExecutor.properties file and retrythe operation.

AWKCGE005E You did not specify the namespaceand the username.

Explanation: The namespace and the username arerequired parameters if you specified the password.


Operator response: Provide the namespace and theusername either here or in theCognosJobExecutor.properties file and retry theoperation.

AWKCGE006E You did not specify the namespaceand the password.

Explanation: The namespace and password arerequired parameters if you specified the username.


Operator response: Provide the namespace andpassword either here or in theCognosJobExecutor.properties file and retry theoperation.

AWKCGE007E You did not specify the username andthe password.

Explanation: The username and password arerequired parameters if you specified the namespace.


Operator response: Provide username and passwordeither here or in the CognosJobExecutor.properties fileand retry the operation.

AWKCGE008E An error occurred while attempting toretrieve the namespaces.



Operator response: Analyze the error message in theJava IBM Cognos plug-in log file.

AWKCGE009E An error occurred while attempting toretrieve the reports.




AWKCGE010E No report was found on the Cognosserver.



Operator response: Verify that the report filter youspecified is correct and that there are reports for thespecified namespace.

AWKCGE011E No namespace was found on theCognos server.


AWKCGE001E • AWKCGE011E



Operator response: Verify that the namespace youspecified is correct and that the connection to the serveris active.

AWKCGE012E An error occurred while attempting toconnect to the IBM Cognos server. TheIBM Cognos server connectionparameters are incorrect: error_msg.

Explanation: Error connecting to the IBM Cognosserver.

error_msg identifies the cause of the failure.


Operator response: Verify that the server connectionparameters are correct and analyze the error message inthe Java IBM Cognos plug-in log file for moreinformation.

AWKCGE013E An error occurred retrieving the IBMCognos report service.




AWKCGE014E An Apache exception occurredcommunicating with the IBM Cognosserver. The Apache error message is:error_msg.

Explanation: An error occurred running the IBMCognos report.

error_msg identifies the Apache error message.


Operator response: Correct the error and retry theoperation.

AWKCGE015E An error occurred running the IBMCognos report.




AWKCGE016E The directory "file_path" you specifiedto save the report file does not exist.

Explanation: file_path identifies the name of thedirectory that cannot be found.

The directory where you want to save the file mustexist when the job runs.


Operator response: Provide an existing directory inthe Cognos job definition or create the missingdirectory and retry the operation.

AWKCGE017E The server port is not valid. Specify avalue in the 1 - 65535 interval.

Explanation: A valid server port is required.


Operator response: Specify a valid server port.

AWKCGE018E You did not specify either the outputfile or the email addresses to which youwant to send the report.



Operator response: Provide either the output file orthe email addresses here and retry the operation.

AWKCGE019E You did not specify the report format.

Explanation: The report format is required.


Operator response: Provide the report format andretry the operation.

AWKCGE020E The value "report_format" specified forthe "formatTypes" is not valid. Specify avalid value.

Explanation: report_format identifies the value of theunsupported report format.

A valid report format is required.


Operator response: Provide a valid value for thereport format. Valid vallues are: HTML, HTMLFRAG,HTMLWA, XML, PDF, CSV, XLS, XLSWA.

AWKCGE021E You did not specify the directoryname for the output file. The output filemust contain the fully qualified path.

Explanation: The output file does not contain thedirectory name.


Operator response: Provide the the directory name forthe output file here and retry the operation.



AWKCGE022E You did not specify the serveraddress.

Explanation: The server address is a requiredparameter.


Operator response: Provide the server address eitherhere or in the CognosJobExecutor.properties file andretry the operation.

AWKCGE023E You did not specify the port.

Explanation: The port is a required parameter.


Operator response: Provide the port either here or inthe CognosJobExecutor.properties file and retry theoperation.

AWKCGE024E An error occurred while attempting toretrieve the parameters.




AWKCGE025I No parameter was found for theselected report.

Explanation: No parameter was found on the Cognosserver for the selected report.


Operator response: Verify that the report youspecified is correct and that the connection to the serverworks correctly.

AWKCGE026E An error occurred during connectionto the IBM Cognos report service. Verifyyour credentials.



Operator response: Verify that the credentials youspecified are correct and retry the operation.

AWKCGE027E An error occurred during theconnection to the IBM Cognos reportservice. The error is: "error_msg".

Explanation: error_msg identifies the cause of thefailure.

See message text.


Operator response: Analyze the error message in the

Java IBM Cognos plug-in log file.

AWKCGE028E The IBM Tivoli Workload Scheduleragent cannot monitor the IBM Cognosreport.

Explanation: The IBM Tivoli Workload Scheduleragent stops monitoring the IBM Cognos report.

The IBM Cognos report status cannot be retrieved andthe agent sets the status of the IBM Tivoli WorkloadScheduler job to "unknown".

System action: The product stops monitoring the IBMCognos report.

Operator response: Verify the IBM Cognos reportstatus in the IBM Cognos product. If the IBM Cognosreport completed successfully, release the IBM TivoliWorkload Scheduler job dependencies manually.

AWKCGE029E An error occurred while retrievingthe list of available IBM Cognos reports.




AWKCGE030E You did not specify the file name forthe output file. The output file mustcontain the fully qualified path.

Explanation: The output file does not contain the filename.


Operator response: Provide the the file name andretry the operation.

AWKCGE031E An error occurred while retrievingthe report output.




AWKCGE032E An error occurred when sending thereport output by email.






AWKCGE033E An error occurred when saving thereport to the file "report_file".

Explanation: report_file identifies the fully qualifiedpath of the file that cannot be created.

See message text.



AWKCGE034E An error occurred when deleting thereport.




AWKCGE035E An error occurred when saving thereport to the file "report_file". The erroris: "error_msg".

Explanation: report_file identifies the fully qualifiedpath of the file that cannot be created.

error_msg identifies the cause of the failure.

See message text.



AWKCGE036E An error occurred when deleting thereport. The error is: "error_msg".


See message text.



AWKCGE037E An error occurred when sending thereport output by email. The error is:"error_msg".


See message text.



AWKCGE038E An error occurred when retriving thereport output. The error is: "error_msg".


See message text.



AWKCGE039E An error occurred while running theIBM Cognos report. The error is:"error_msg".


See message text.



AWKCGE040E The report with path "report_path" wasnot found on the Cognos server.

Explanation: report_path identifies the path of thereport.

See message text.


Operator response: Verify that the report path youspecified is correct.

AWKCGE041E The user "user_name" does not havethe "report_permission" permission on thereport with path "report_path".

Explanation: user_name identifies the name of the userrunning the report.

report_permission identifies the required permission.

report_path identifies the path of the report.

See message text.


Operator response: Verify that the user has thenecessary permission to manage the report youspecified. Ask the Cognos administrator to assign thenecessary permission to the user.

AWKCGE042E You specified an invalid format"report_format" for the interactive report"report_path". Specify the HTML format.

Explanation: report_format identifies the formatspecified for the report.

report_path identifies the path of the report.




Operator response: Specify the HTML format forinteractive reports.

AWKCGE056E The IBM Cognos report completedwith errors.



Operator response: Ask the IBM Cognosadministrator to analyze the report error messages onthe IBM Cognos server and solve the problem. Afterthe IBM Cognos report is ready to start, retry theCognos job submission.

AWKCGE057E The IBM Cognos report cannot besubmitted.

Explanation: The IBM Cognos report cannot startbecause its status is suspended or inactive.


Operator response: Ask the IBM Cognosadministrator to analyze the report status. After theIBM Cognos report is ready to start, retry the Cognosjob submission.

AWKCGE058I You stopped the job by using the killcommand.




AWKCGE056E • AWKCGE058I


AWKCLI - Command line messagesThis section lists error and warning messages that could be generated by thedynamic workload broker Command Line Interface.

The message component code is CLI.

AWKCLI001E An error occurred while getting theconfiguration file "config_file". Thefollowing error was returned: "error".


System action: The application will use the defaultvalues.

Operator response: Check the configuration file path.

AWKCLI013E The required variable "variable" ismissing from the configuration file.



Operator response: Define the variable inconfiguration file.

AWKCLI031E The command failed because of amissing mandatory parameter"parameter".



Operator response: Insert the missing parameter.

AWKCLI032E The command failed because of amissing value for a parameter:"parameter"



Operator response: Insert the missing parametervalue.

AWKCLI033W Unable to read the configuration file"file_name . The default configurationfile will be used.

Explanation: The configuration file might becorrupted or missing.

System action: The operation continues using valuesfrom the default file.

Operator response: Check that the configuration file iscorrect.

AWKCLI034E Unable to read the defaultconfiguration file.



Operator response: Check that the defaultconfiguration file is correct.

AWKCLI035E Unable to read configuration files.



Operator response: Check that the configuration file iscorrect.

AWKCLI036E The command failed because thevariable "variable" is not present in theconfiguration file.

Explanation: A required variable cannot be found inthe configuration file.


Operator response: Set the variable in configurationfile and try again.

AWKCLI040E The command failed because theparameter "VALUE_0" is not specified asa command parameter and the property"VALUE_1" is not present in theconfiguration file.



Operator response: Specify the required parameter.

AWKCLI041E The command failed because of amissing parameter. One of the followingparameters is required: "parameter_1" ,parameter_2 .



Operator response: Define the missing parameter.

AWKCLI042E The command failed because thefollowing mutually exclusive parameterswere both included. "parameter_1" ,"parameter_2" .


AWKCLI001E • AWKCLI042E



Operator response: Reissue the command specifyingonly one of the parameters.

AWKCLI043E The command failed because avariable has an incorrect format:"VALUE_0".



Operator response: Check the JSDL variable format.

AWKCLI044E The command failed because neitherof the following affinity parameters wasspecified: "parameter_1" , "parameter_2" .. One of the parameters must bespecified.



Operator response: Specify one of the affinityparameters.

AWKCLI045E The command failed because only oneof the following affinity parameters canbe specified: "parameter_1" , parameter_2 .



Operator response: Check the affinity parametersspecification.

AWKCLI046E The command failed because of anincorrect affinity format: "VALUE_0".



Operator response: Check the affinity parameterformat.

AWKCLI047E The command failed becauseparameter "parameter" is not applicable.



Operator response: Correct the command and tryagain.

AWKCLI049E Unable to find the address of a TivoliDynamic Workload Broker server in theconfiguration file.

Explanation: No Job Dispatcher is specified.

System action:

Operator response: A valid Tivoli Dynamic WorkloadBroker server address must be specified in theconfiguration file.

AWKCLI050E The Tivoli Dynamic Workload Brokerserver address "address"is not in a correctformat.

Explanation: The Tivoli Dynamic Workload Brokerserver address found in the configuration file is not avalid address.

System action:

Operator response: Check the Tivoli DynamicWorkload Broker server address format.

AWKCLI051E An unexpected error occurred whilesubmitting the job.



Operator response: Check the log file for informationabout the cause of the error.

AWKCLI052E Unable to find the JSDL file"file_name".



Operator response: Check that the JSDL file is presentin the specified directory.

AWKCLI053E The JSDL file format is not correct:"VALUE_0" --- "VALUE_1".

Explanation: The JSDL file is not well formedaccording to the JSDL specification.


Operator response: Check the JSDL file format

AWKCLI054E Tivoli Dynamic Workload Brokerserver service is not available

Explanation: Possible causes are:

v The server cannot be contacted, is not responding, oris switched off.

v The service is already active or has been disabled.System action:

Operator response: Check the status and theaccessibility of the Tivoli Dynamic Workload Brokerserver.



AWKCLI055E The operation failed because the inputparameter is incorrect. "parameter"

Explanation: One of the parameters cannot beprocessed by the Tivoli Dynamic Workload Brokerserver



AWKCLI056E Tivoli Dynamic Workload Brokerserver - operation failed. VALUE_0




AWKCLI057E An unexpected error occurred.



Operator response: Check the log file for moreinformation about the error.

AWKCLI059E Unable to find job ID "jobID".



Operator response: Check whether the specified jobID exists.

AWKCLI060E The operation failed because thespecified state is not a valid job state.



Operator response: Check whether the specified stateis correct.

AWKCLI061E The operation failed because job ID"jobID"is not correct.



Operator response: Check whether the specified jobID is correct.

AWKCLI063E The operation failed because of anincorrect parameter and value:"parameter" , "value". This parameter doesnot support wildcards.



Operator response: Correct the command and tryagain.

AWKCLI065E The job definition file "file_name"contains errors.



Operator response: Check for errors in the jobdefinition file.

AWKCLI066E The job definition name "job_def"is notcorrect.



Operator response: Check the job name.

AWKCLI067E Unable to find the job definition"job_def" .



Operator response: Check whether the specified jobexists.

AWKCLI068E The command failed because of anincorrect query parameter.



Operator response: Specify a supported parameter.

AWKCLI069E The specified job state "state"is notvalid.



Operator response: Correct the specified job state.

AWKCLI070E One of the selection criteria must bespecified.



Operator response: Relaunch command specifyingone of the selection criteria as described in commandusage.



AWKCLI072E Unable to find job status "status".

Explanation: You have specified an incorrect jobstatus.


Operator response: Correct the job status and tryagain.

AWKCLI073E The command failed because the date"date" is in an incorrect format. Thevalid format is "date_format"



Operator response: Correct the date and try again.

AWKCLI074E You have specified an incorrect date:"date"



Operator response: Correct the date and try again.

AWKCLI075E The date from "date_1"to "date_2" is notvalid.



Operator response: Correct the dates and try again.

AWKCLI087E Unable to find JSDL file "file_name" .



Operator response: Check the JSDL file path.

AWKCLI088E "Unable to connect to the TivoliDynamic Workload Broker server.".



Operator response: Check whether the Tivoli DynamicWorkload Broker server is running and can be reached.

AWKCLI089E Unexpected exception received whilesubmitting the job.



Operator response: Check the log file for moreinformation about the error.

AWKCLI090E An unexpected error occurred. Unableto contact the Tivoli Dynamic WorkloadBroker server.



Operator response: Check whether the Tivoli DynamicWorkload Broker server is running and can be reached.

AWKCLI098E The command failed because of amissing value for parameter "parameter" .



Operator response: Retry the command specifying themissing value.

AWKCLI099E The command failed because amandatory parameter "parameter" ismissing.



Operator response: Retry the command specifying themissing parameter.

AWKCLI100E The command failed because the valuespecified for the offset parameter "offset"is out of range. Specify a numberbetween 0 and "Long_MAXVALUE".



Operator response: See message text.

AWKCLI101E The command failed because the valuespecified for the sizePage parameter"page_size" is out of range. Enter a validnumber between 0 and"Integer_MAXVALUE".




AWKCLI102E A database error occurred. Theinternal error returned by the databasemanager is: "db_error".



Operator response: Check the database status andavailability.



AWKCLI105E The command failed because theformat of the Resource Definition file isincorrect.



Operator response: Check the resource definition file.

AWKCLI109E Incorrect JSDL file format "VALUE_0"--- "VALUE_1".



Operator response: Check the JSDL file.

AWKCLI110E The job ID "JobID" is not correct.



Operator response: Correct the job ID.

AWKCLI120E The command failed because ofincorrect input parameters "parameters" .



Operator response: Check the input parameters.

AWKCLI121E "Resource Advisor - Operation failed.".



Operator response: Check the log files and retry theoperation.

AWKCLI122E Job Dispatcher - Operationfailed.VALUE_0.



Operator response: Check the log files and retry theoperation.

AWKCLI129E The specified date "date" is in anincorrect format. The valid format is"date_format".



Operator response: Correct the date format.

AWKCLI130E You have specified an incorrect date:"date".



Operator response: Correct the date.

AWKCLI132E The Job Dispatcher service isunavailable.



Operator response: Check whether the Job Dispatcheris running and can be reached.

AWKCLI134E The job ID "jobID" is incorrect.



Operator response: Check the job ID and retry theoperation.

AWKCLI135E The specified job state "state" is notcorrect.



Operator response: Check the state value and theallowed values.

AWKCLI150E The job definition JOB_NAME cannotbe updated. It is not present in the JobRepository.



Operator response: Check that the specified jobdefinition name is correct.

AWKCLI151E The "all_option" option cannot be usedwith other query filter options.

Explanation: You can use this option on its own ordefine a query using a combination of other options.


Operator response: Check the command usage.

AWKCLI154E The specified quantity"RESOURCE_QUANTITY" is not aninteger. You can specify an integerwithin the 0 and 99999999 range.





Operator response: Specify an integer.

AWKCLI155E The specified quantity"RESOURCE_QUANTITY_RANGE" isoutside the valid range. You can specifyan integer within the 0 and 99999999range.



Operator response: Specify an integer within the 0and 9999999 range.

AWKCLI156E The specified resource name"RESOURCE_NAME" is not supported.



Operator response: Insert a valid resource name.

AWKCLI157E The specified resource type"RESOURCE_TYPE" is not supported.



Operator response: Insert a valid resource type.

AWKCLI170E Rollback failed with database error:"error".

Explanation: An error occurred when trying torollback a transaction.


AWKCLI176E The specified value "port" for theconnection port is not a number. Specifya valid number in the command lineconfiguration file.

Explanation: The specified value is not a number.


Operator response: Insert a number for the connectionport in the configuration file.

AWKCLI177E The required server connectionparameters are missing. Specify thehostname or the communication ports ofthe server in the command lineconfiguration file.

Explanation: You did not provide the hostname or thecommunication ports of the server.


Operator response: Specify the hostname or thecommunication ports of the server in the configurationfile. Enter the command again.



AWKDBE - Database Job Executor messagesThis section lists error and warning messages that could be generated by theroutines that handle the Database Job Executor.

The message component code is DBE.

AWKDBE001E The server address is missing.

Explanation: The server address is required.


Operator response: Specify a server address.

AWKDBE002E The server port is either missing ornot valid. Specify a value in the 1..65535interval.

Explanation: A valid server port is required.


Operator response: Specify a valid server port.

AWKDBE003E The database name is missing.

Explanation: The database name is required.


Operator response: Specify a database name.

AWKDBE004E The credentials are missing.

Explanation: The credentials are required.


Operator response: Specify the credentials.

AWKDBE005E The user name or the password ismissing.

Explanation: The user name and the password arerequired.


Operator response: Specify both user name andpassword

AWKDBE006E Missing statements.

Explanation: No statement was specified. At least onestatement is required.


Operator response: Specify one or more statements.

AWKDBE007E Runtime Error "exception_message".




AWKDBE008E Unable to create the output file.




AWKDBE009E Unable to create the connection"exception_message".




AWKDBE010E MSSQL Job Execution Error"error_message".




AWKDBE011E SQL Job Execution Error"error_message".




AWKDBE012E Rollback error "error_message".




AWKDBE013E Connection close error "error_message".




AWKDBE014E Output file close error "error_message".




AWKDBE001E • AWKDBE014E


AWKDBE015E The DBMS value is either empty ornot valid.

Explanation: The value specified for DBMS is eitherempty or not valid.


Operator response: Specify a valid DBMS or do notuse the DBMS tag.

AWKDBE016E Empty statement.

Explanation: The statement is empty.


Operator response: Provide a value for the statementand retry the operation.

AWKDBE017E The JDBC Driver path is missing.

Explanation: The JDBC Driver path in theconfiguration file is required.


Operator response: Specify the JDBC Driver path.

AWKDBE018E Cannot access required JDBC Driverfolder

Explanation: The job was not able to access a JDBCDriver folder, you might not have enough permissions.


Operator response: Verify that you have enoughpermissions.

AWKDBE019E The job type is not valid; it must be"job" or "sql"



Operator response: Specify a correct job type.

AWKDBE020E The driver class name is missing.



Operator response: Specify a driver class name.

AWKDBE021E The connection URL is missing.



Operator response: Specify a connection URL.

AWKDBE022I Test connection successful.




AWKDBE023E An error occurred while attempting toconnect to the database. See the attacheddatabase message for more information:exception_message.

Explanation: The database address, name, or portmight be incorrect.



AWKDBE024I The job was stopped by the user.

Explanation: The job was stopped with the killcommand.



AWKDBE025E The job type is not valid; it must be"sql".



Operator response: Specify the correct job type.

AWKDBE015E • AWKDBE025E


AWKDSE - InfoSphere DataStage Plug-in messagesThis section lists error and warning messages that could be issued by the InfoSphereDataStage Plug-in component.

The message component code is DSE.

AWKDSE001E You did not specify the project name.

Explanation: The project name is a mandatoryparameter.


Operator response: Provide the required informationeither here or in the DataStageJobExecutor.propertiesfile and retry the operation.

AWKDSE002E You did not specify the job name orjob alias. The job name