mercury instrument cluster manual pages1

4
Instrument Cluster Removal 1. Disconnect the battery ground cable. 2. Remove the instrument cluster finish panel. For additional information, refer to Section 501 - 12 . 3. Remove the lower steering column cover. 1. Remove the two bolts. 2. Position the parking brake release aside. 3. Remove the lower steering column cover. 4. Remove the instrument panel steering column opening cover reinforcement (04502). Remove the five screws. 5. Position the transmission range indicator cable out of the way. 1. Disconnect the cable. 2. Remove the bolt. 3. Position the transmission range indicator cable out of the way. 6. Remove the instrument cluster aside. 1. Remove the screws. 2. Remove the instrument cluster aside. Disconnect the electrical connector. Installation 1. To install, reverse the removal procedure. SECTION 413-01A: Instrument Cluster — Conventional 1999 Crown Victoria/Grand Marquis Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/26/1998 2 1999 Crown Victoria/Grand Marquis Workshop Manual 2/1/2011 http://www.fordtechservice.dealerconnection.com/pubs/content/~WSXA/~MUS~LEN/21/S...

Upload: stephenburton

Post on 09-Mar-2015

50 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Mercury Instrument Cluster Manual Pages1

Instrument Cluster

Removal

1. Disconnect the battery ground cable.

2. Remove the instrument cluster finish panel. For additional information, refer to Section 501-12.

3. Remove the lower steering column cover. 1. Remove the two bolts. 2. Position the parking brake release aside. 3. Remove the lower steering column cover.

4. Remove the instrument panel steering column opening cover reinforcement (04502).

� Remove the five screws.

5. Position the transmission range indicator cable out of the way. 1. Disconnect the cable. 2. Remove the bolt. 3. Position the transmission range indicator cable out of the way.

6. Remove the instrument cluster aside. 1. Remove the screws. 2. Remove the instrument cluster aside.

� Disconnect the electrical connector.

Installation

1. To install, reverse the removal procedure.

SECTION 413-01A: Instrument Cluster — Conventional 1999 Crown Victoria/Grand Marquis Workshop Manual

REMOVAL AND INSTALLATION Procedure revision date: 06/26/1998

21999 Crown Victoria/Grand Marquis Workshop Manual

2/1/2011http://www.fordtechservice.dealerconnection.com/pubs/content/~WSXA/~MUS~LEN/21/S...

Page 2: Mercury Instrument Cluster Manual Pages1

21999 Crown Victoria/Grand Marquis Workshop Manual

2/1/2011http://www.fordtechservice.dealerconnection.com/pubs/content/~WSXA/~MUS~LEN/21/S...

Page 3: Mercury Instrument Cluster Manual Pages1

Instrument Panel—Cluster Finish Panel

Removal

1. Remove the audio unit. For additional information, refer to Section 415-01.

2. Remove the RH instrument panel finish panel.

� Disconnect the electrical connectors.

3. Remove the LH instrument panel finish panel.

� Disconnect the electrical connectors.

4. Place the gearshift lever into the 1 position.

5. Place the steering column into the full tilt position.

6. Remove the instrument panel cluster finish panel. 1. Remove the screws. 2. Remove the instrument panel cluster finish panel.

� Disconnect the electrical connectors.

Installation

1. To install, reverse the removal procedure.

SECTION 501-12: Instrument Panel and Console 1999 Crown Victoria/Grand Marquis Workshop Manual

REMOVAL AND INSTALLATION Procedure revision date: 06/26/1998

11999 Crown Victoria/Grand Marquis Workshop Manual

2/1/2011http://www.fordtechservice.dealerconnection.com/pubs/content/~WSXA/~MUS~LEN/20/S...

Page 4: Mercury Instrument Cluster Manual Pages1

Audio Unit

Removal

1. Disconnect the battery ground cable.

2. Use Radio Removing Tool to pull out the audio unit.

3. Remove the audio unit. 1. Disconnect the connectors. 2. Disconnect the radio antenna lead in cable. 3. Remove the audio unit.

Installation

1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.

To install, reverse the removal procedure.

SECTION 415-01: Audio Unit 1999 Crown Victoria/Grand Marquis Workshop Manual

REMOVAL AND INSTALLATION Procedure revision date: 06/26/1998

Special Tool(s)

Radio Removing Tool 415-001 (T87P-19061-A)

11999 Crown Victoria/Grand Marquis Workshop Manual

2/1/2011http://www.fordtechservice.dealerconnection.com/pubs/content/~WSXA/~MUS~LEN/20/S...