mercedes-benz approved - butler · 2018. 11. 7. · le immagini riprodotte non sono vincolanti....
TRANSCRIPT
2
Description
SPEED3DHPMB3D wheel aligner
Supplied with the aligner:Specific Mercedes softwareMercedes original databaseTwo pair of 3-point wheel clamps STDA35E/3D-MBOne set of four spirit levels STDA149 for targetsOne pair of STDA134 low friction turn tablesOne extra pair of STDA128 batteries (total 4)One extra pair of STDA117 lift brackets (total 4)Cabinet equipped with side holders for MB 3-point wheel clamps (not included)Cabinet including support for Romess device (not included)PC with mouse and DVD reader
WHE
EL A
LIGNE
RS
SPEED3DHPMB
Original Mercedes database Data before and after adjustment
Exclusive aligner with 3D targets.Equipped with 2 space saver sensors and 4 high resistance plastic targets to detect all vehicle angles in just few seconds.Remote control located on each sensor.
Mercedes-Benz approved
DBW
14U
(02)
Le caratteristiche tecniche e gli allestimenti presentati in questo prospetto possono subire variazioni. Le immagini riprodotte non sono vincolanti.Technical data and composition presented in this catologue may vary. Pictures reproduced are only indicative.
Die techn. Daten und die Ausrüstungen, die in diesem Prospekt enthalten sind, können Änderungen erfahren. Deshalb sind die Abbildungen unverbindlich.Les caractéristiques techniques et les compositions présentées dans ce prospectus peuvent subir des variations. Les images reproduites n'ont qu'une valeur indicative.
Las características técnicas y las composiciones ilustradas en este folleto pueden sufrir variaciones. Las imágenes propuestas son solamente indicativas.
Engineering and Marketing S.p.A. a.s.u.Via dell’Ecologia 6 - 42047 Rolo (RE)
Ph. +39-0522-647911 - Fax +39-0522-649760www.butler.it - [email protected]
Bluetooth transmission between measuring heads and control unit.
To be ordered from company Romess:ROMESS measuring device
To be ordered from Mercedes AG:Mercedes wheel clamps (4 x kit)
NOT INCLUDED
STANDARD ACCESSORIES
STDA117 (2 sets = 4 brackets) Two standard brackets and two extra
STDA149 (4 x kit)Spirit levels for targets
STDA35E/3D-MB (4 x kit)Two pair of 3-point wheel clamps for general usage
STDA134 (2 x kit)Turntables
STDA128 (2 sets = 4 batteries) Two standard batteries and two spares