M E M B E R O F J O R I S I D E G R O U P

T H E S T E E L F U T U R E

JI Wall 1000 SF

2

JI Wall 1000 SFProduct Data Sheet

3

Onduwall

1000

1000

1000

1000

With the JI Wall 1000 SF, Joris Ide allows for an architectural solution by combining the horizontal or vertical placed panels with accessories in different aesthetic finishes, coatings and color throughout a wide range of external profiles. In this way the building can be designed as unique in its kind.

DESCRIPTION

EXTERNAL PROFILES

WEIGHT AND THERMAL PERFORMANCE

Core Thickness (mm)(*) 60 80 100 120 150

U-value (W/m²K) 0.31 0.24 0.19 0.16 0.13

Weight (kg/m²) 11.79 12.59 13.39 14.19 15.39

U-values are calculated in according to the method required by Part L2 (England and Wales) Building Regulations and Section 6 (Scotland) Technical Handbooks.

Microrib

Plank

Liner

Onduwall (only available in 80 mm core thickness)

4

JI Wall 1000 SFProduct Data Sheet

A1. External weather sheet (*) Joris Ide offers one of the widest ranges in coatings and colors which can be defined per project and building requirements. Please consult our colorflow for detailed information.

(*) The Onduwall is only available in Ultra 60µ 7016/9006/9007 or HPS 200µ Anthracite Grey

HPS 200 Ultra®

HPS 200 Ultra® consists of Galvalloy, 95:5% zinc/aluminium alloy coated steel, with a coating weight of 255 gm–2, manufactured to BS EN 10346 : 2009, coated on the face side with a primer and the HPS200 plastisol.

Confidex® guarantee available.

Plastisol Leather

Plastisol Leather consists of Z225 galvanized steel, manufactured to BS EN 10346 : 2009, coated on the face side with a primer and a plastisol coating to a total coating thickness of 200 μm.

Prisma®

Colorcoat Prisma® consists of Galvalloy, 95:5% zinc/aluminium alloy coated steel, with a coating weight of 255 g·m–2, manufactured to BS EN 10346 : 2009, coated on the face side with a 25 μm primer and a 25 μm polyurethane topcoat.

Confidex® guarantee available.

MATERIALS

Please consult our colorflow for detailed information. ›WWW.JORISIDE.COM

COLORFLOW BY JORIS IDE

WWW.JORISIDE.COM

M E M B E R O F J O R I S I D E G R O U P

T H E S T E E L F U T U R E

5

Essential 25µ

Essential 25µ consists of Z225 galvanized steel, manufactured to BS EN 10346 : 2009,coated on the face side with a primer and a polyester coating to a total coating thickness of 25 μm.

PVDF 25µ

PVDF 25 μ consists of Z225 galvanized steel, manufactured to BS EN 10346 : 2009, coated on the face side with a primer and a polyvinylidene fluoride/acrylic (70-80/30-20) coating to a total coating thickness of 27 μm

Ultra 60µ

Ultra 60 µ consists of Z275 galvanized, coated, steel to BS EN 10346 : 2009 coated on the face side with a 25 μm thick primer and 30 μm thick polyurethane topcoat incorporating polyamide particles which give a textured surface finish.

A2. Internal liner sheet (Liner profile)

Internal conditions of a building can vary; Joris Ide can offer a wide range to suit heavy-duty environments such as humidity and ammoniac. Please consult our colorflow for detailed information.• 15 µ Polyester RAL 9002 (standard)• 25 µ Polyester• Colorfarm 35µ• PVC Foodsafe 150 µ PVC• Aluminimum• HPS 200 µ

A3. INSULATION CORE

JI Wall 1000 SF insulated panels are made with a high thermal performance and environmental sustainable PIR foam with zero ozone depletion and a low global warming potential.

6

JI Wall 1000 SFProduct Data Sheet

For over 20 years the Confidex® Guarantee from Tata Steel has re-mained best in class. Confidex® is the product performance guaran-tee for Colorcoat HPS200 Ultra® and Colorcoat Prisma®, when used in an external conventional building envelope application namely roof and wall cladding using single skin, built-up or composite panel con-struction in industrial and commercial buildings. Confidex® offers the longest and most comprehensive guarantee for pre-finished steel in Europe.

Key features include:•Extendedguaranteecover forup to40yearsonColorcoatHPS200Ultra®

and up to 30 years on Colorcoat Prisma®.•Norequirementforannualinspectionsormaintenancetovalidatetheguar-

antee.•Coverscutedgesproducedunderfactorycontrolledconditionsfortheen-

tire guarantee period.•Backedbyyearsofworldwideproducttestingandrealworldexperience.•Providescoverforroofpitchesdownto1°andnodistinctionbetweendif-

ferent roof pitches above that.•Offereddirectlytothebuildingownerandprovidesacontractualrelation-

ship between Tata Steel and the building owner.•Fullytransferableshouldbuildingownershipchange.•Helpsreducethelevelofriskforeachpartofthesupplychain.•Quickandsimpleonlineregistrationform.

With Confidex® registration Without Confidex® registration

Other warranties

Whilst Confidex® has always been restricted to the weathering performance of the external cladding, Tata Steel has recognised the growing emergence of demanding internal environment projects, such as energy from waste plants, and may offer a non-Confidex® warranty on acase by case basis for Colorcoat HPS200 Ultra® used internally.Application specific warranties are also available for non-standard cladding applications; i.e residential roofs, flashings and sectional roller shutter doors.

Regions covered by the Confidex® Guarantee

KEY Northern Europe – Zone 1 Southern Europe – Zone 2

For areas outside of Confidex® zones please contact Tata Steel for more information.

Notes1. Figures under the Coastal heading are for buildings within 1 km of

any coast.2. Full terms and conditions of the Confidex® Guarantee are on the

online application form, available from www.colorcoat-online.com/registration

3. Confidex® must be registered within 3 months of the building completion date for the guarantee to be valid.

4. The Confidex® Guarantee periods on the diagram above are applicable to Zone 1 and Zone 2. For more information visit www.colorcoat-online.com/confidexmap

Colorcoat HPS200 Ultra, Colorcoat Prisma, Confidex are trademarks of Tata Steel UK Limited.

Confidex® Guarantee by Tata Steel

a

7

ENVIRONMENTAL

The JI Wall 1000 SF corresponds to the BRE Global Green Guide online generic specification Coated steel composite profiled panel with pentane blown PUR/PIR insulation and steel liner on steel support, structural steel frame with no internal finish (ref. 806600001) which achieves a summary rating of A+ within external wall construction.

FIRE

The external and internal faces of the panel are Class 0 ac-cording to the Building Regulations when tested to BS476: Parts 6: 1989 and Part 7: 1987. The JI Wall 1000 SF has a LPCB (Loss Prevention Certification Board EXT-B Grade (certificate No : 700a to LPS181 : Part 1 : Issue 1 )* Only applies to JI Wall 1000 SF in Microrib, Liner profile or Plank profile

PanelOrientation

Thickness(mm)

Fire resistance(*)Grade Core

LPCBref.N°

Vert. Hori.Integrity

(min)Insulation

(min)

JI Wall1000 SF

v v 60-120 - - EXT-B PIR 700a/12

JI Wall1000 SF

v 60-120 61 20 EXT-A15 PIR 700a/13

JI Wall1000 SF

v v 60-120 30 15 EXT-A15 PIR 700a/14

(*) Please check redbooklive (www.redbooklive.com) for notes on installation

ACCOUSTIC

Hz 125 250 500 1K 2K 4KSRi 60mm 12 12 15 17 35 53SRi 80mm 15 18 22 25 25 52SRi 100mm 15 18 21 24 27 52

(*) for other thicknesses, please contact our technical team.

SEALS

The JI Wall 1000 SF PIR comes standard with a factory ap-plied seal in the side lap (fig.1, a). Additional seals might be applied on site depending on condition.

Minimum length : 2.50 m – Maximum length : 14 m (shorter lengths possible upon demand)

PRODUCT TOLERANCES [ According to EN 14509]

Length (mm) L < 3000 mm : +/-5 mmL> 3000 mm : +/-10 mm

Width (mm) +/-2 mm Thickness (mm) +/-2 mm

DIMENSIONS AND TOLERANCES

PERFORMANCE

fig.1

8

JI Wall 1000 SFProduct Data Sheet

The JI Wall 1000 SF is manufactured according to the ISO 9001 and are assembled from high-quality raw materials which are selected by a detailed supply chain manage-ment and in-house laboratory controls. The product is pro-duced to the highest quality standards such as EN 14509.

The JI Wall 1000 SF carries the product conformity accord-ing to the European legislation and therefore all packs are CE-marked and carry the Declaration of Performance.

CERTIFICATIONS,QUALITYANDDURABILITY

ACCESSORIES

MAINTENANCE COMPOSITE PANELS

Joris Ide can supply accessories such as repartition plates, flashings, top hats and panel bearers.

Joris Ide advises to do an annual inspection of the panels and to carry out any remedial work identified during inspection.

The maintenance & cleaning frequency is depending on the application environment and actual pollution condi-tions of the composite panel.Exterior used panels need to be cleaned once per year. For interior used panels, the cleaning is depending on the ac-tual pollution conditions.

The cleaning of building walls should be made from up to down manually or by suitable cleaning facilities. Please notice that any cleaner which includes corrosive material is forbidden to be used for the cleaning. Specific cleaning processes as follow:

1. Use plenty of clean water to wash the panel’s surface;

2. Use soft cloth with diluted detergent to wipe the panel’s surface softly;

3. Use clean water again to wash the stains off;

4. Check the panel’s surface and special cleaning with detergent is needed, if some parts are still not clean;

5. Use clear water to wash the panels’ surface till all stains have been washed out.

Notice:

Please don’t clean if the panel’s surface is hot (over 40 °C) because too fast volatility of the water will do harm to the coating. Please notice especially that suitable detergent should be chosen. Generally neutral detergent is OK. Please don’t use strong alkaline deter-gent, such as potassium hydroxide, sodium hydroxide and also please don’t use strong acid detergent, abrasive detergent and paint soluble detergent. We would suggest to clean a small part as an experiment before carrying out thorough cleaning of the whole project.

LPS 1181: Issue 1Cert No. 700a

9

A1

TOP HAT

120

5

47

A1

2

3

6

1

1

E1

E1

C1

F1

F1 φ 7

2

4

1

5

C1

3

1

60

15

B

20095°

CONSTRUCTION DETAILS

Drip Detail

Joint Detail

1. JI Wall 1000 SF PIR LPCB approved

2. Galvanized steel support with joints sealed

3. Butyl seal for air tightness

4. Fixing5. Concrete wall

1. JI Wall 1000 SF PIR LPCB approved

2. Steelwork3. Butyl tape4. Fixing with washer5. Butyl rubber sealant

site applied6. Site applied insula-

tion to fill up space7. Top hat and insert

JORIS IDE NV

Hille 1748750 ZwevezeleBelgium

E info@joriside.bewww.joriside.be

BOSVELD divisionBosveldstraat 48750 ZwevezeleBelgium

OOSTKAMP divisionKortrijksestraat 5058750 ZwevezeleBelgium

MAFER division of JORIS IDE NVChaussée de Liège 1574460 Grâce-HollogneBelgiumT +32 4 234 18 18F +32 4 234 08 79E mafer@mafer.bewww.mafer.be

ISOMETALL division of JORIS IDE NVZ.I. de la Baraque FraitureRoute de la Roche6960 ManhayBelgiumT +32 (0)80 41 81 60F +32 (0)80 41 81 61E info@isometall.comwww.isometall.be

Z.I. de NovitalChemin de Casselèvres31790 Saint JoryFranceT +33 (0)5 34 27 68 68F +33 (0)5 34 27 68 69

JORIS IDE SUD OUEST SAS

Route d’Orthez Z.I. 40700 HagetmauFranceT +33 (0)5 58 79 80 90F +33 (0)5 58 79 86 02E commercial.jiso@joriside.fr

JORIS IDE DEUTSCHLAND GMBH

Promenade 1891522 AnsbachGermanyT +49 (0)981 188 929 00F +49 (0)981 188 929 99

JORIS IDE LTDKooperativnay street 1 liter A188349 Gatchinskiy districtLeningrad region

Sq. Konstitusii, 7 liter A, room 339Б196247 Saint-PetersburgRussia

T +7 (812) 438 41 14 (Gatchina)T +7 (812) 438 41 35 (Gatchina)T +7 (812) 676 13 05 (St. Petersburg)F +7 (812) 702 39 28 (Gatchina)F +7 (812) 676 13 04 (St. Petersburg)www.joriside.ru

EUROPE TWIN TILE NV

Nijverheidslaan 15283660 OpglabbeekBelgiumT +32 (0)89 81 25 81 (Belgium)T +32 (0)89 81 25 84 (Export)F +32 (0)89 81 25 82E info@twintile.be

SOCIETE BRETONNE DE PROFILAGE SASParc d'activités de Bel Air22600 Saint-CaradecFranceT +33 (0)2 96 25 09 00F +33 (0)2 96 25 08 57E sbp@joriside.fr COMPTOIR DU BATIMENT

ET DE L’INDUSTRIE SAS

Alpha Parc Ouest BP 33,Route de Nantes79300 BressuireFranceT +33 (0)5 49 65 83 15F +33 (0)5 49 74 10 55E cbi@joriside.fr

PROFINORD EURLParc d’activité de la Vallée de l’EscautZ.I. N° 9 Est59264 OnnaingFranceT +33 (0)3 27 45 54 54F +33 (0)3 27 45 59 59E profinord@joriside.fr

Gospodarska 1610255 Zagreb-StupnikCroatiaT +38 51 6530 977F +38 51 6530 978www.megaprofil.hr

Magyarorszag Kft.X. kerulet 0465/108. hrsz.6100 KiskunfelegyhazaHungaryT +36 (76) 81 46 70F +36 (76) 81 46 79

MEGAPROFIL ROMANIAStrada Principala 58305100 Buziaș. Jud. TimișoaraRomaniaT +40 256 307 700F +40 256 307 729www.megaprofil.rowww.joriside.ro

JORIS IDE AUVERGNE SAS

Z.I. Les Bonnes BP 1243410 Lempdes sur AllagnonFranceT +33 (0)4 71 74 61 00F +33 (0)4 71 74 61 01E infosjia@joriside.fr

Unité du Vaucluse2525 Route d’Orange84700 SorguesFranceT +33 (0)4 90 39 94 95 F +33 (0)4 90 48 17 55

94 Boulevard de ThouarsZI n°4 Saint Porchaire79300 Bressuire, FranceT +33 (0)5 49 82 21 56F +33 (0)5 49 82 36 10

Joris Ide Est18 rue du Moulin, Chemin départemental n° 1351300 Bignicourt-sur-MarneFranceT +33 (0)3 26 74 37 40F +33 (0)3 26 74 37 41 

T +32 (0)51 61 07 77F +32 (0)51 61 07 79

JORIS IDE NV

Hille 174, B-8750 Zwevezele, België T. +32 (0) 51 61 07 77 - F. +32 (0) 51 61 07 51

WWW.JORISIDE.COMdivision.export@joriside.be

BTW BE 0450.452.063, RPR/RPM BRUGGEBIC: GEBABEBB - Bankrek.: 280-0296453-58IBAN: BE 95 2800 2964 5358

MR1

44_0

6/14