melissa and miguel
TRANSCRIPT
life+support
melissa+miguel
life+support
SYSTEM OF INVESTIGATIONEB AND FLOW SYSTEM
PLANT AND WATER CULTURE IN ONE ECO SYSTEM
life+support
VOLUME
ROTATIONAL MOLD
USING THE ROTATIONAL MOLD TO SET UP LIMITSTO CREATE THE MOTHER MOLD
INPUT-OUTPUT
VOLUME:HOW FAST:ARMATURE:PROCESS?
18’’X18’’X18’’
12 inch diameter sphere 1/2’’ of silicone1/2’’ of resin=11’’ diameter sphere
696.6 cubic inches of water 3.02 gallons of water
8 of the 9oz dixie cups and 11 of the 3 oz dixie cups in total.189 cubic inches
Water level is at 8.8 inches 115.2 cubic inches of water.
1/2" layer of silicone and 1/2" layer of resin
life+support
IN TOTAL 19 OUTPUTS
INPUT
3.83 galls of water IF FULL
SEAMLESS
PLANTSPLANTS
PLANTS
PLANTS
PLANTS
PUMP
GRAVEL TO COLLET FISH NUTRIENTAND GROW BACTERIA =
8.5’’ WATER LEVEL
PLANT LIFEROOTS OUT OF WATER
GLOVE, MIX GRAVEL AND AROUNDPULL WATER UP TO ROOTS
WATER LEVEL64OZ
32OZ EACH GLOVE64OZ WATER BOTH FULL
FALL SHORT 2.5 INCHES OF WATER
life+support
life+support
life+support
life+support+fab
life+support+fab
roll-E
life+support+fab
life+support+fab
life+support+fab
life+support+fab
life+support+fab
life+support+fab
OK...so now what?
1) Make it smaller or just center the weight for Roll-E?
2) Test glove inversion and water levels
3) Find the appropriate sized plants for the system
4) Lighting?
5) Re-roll!