mehran bahrami mehranb1999@gmail. mehranbahrami
TRANSCRIPT
1 | MEHRAN BAHRAMI
MEHRAN BAHRAMI
+98(939)3471631
Mehran Bahrami
mehranbahrami.ir
EDUCATION
Bachelor of Science Total GPA: 3.33/4.00 (16.27/20.00)
Mechanical Engineering, University of Kashan (Ranked 3rd among best universities in mechanical engineering in Iran according to THE World University Rankings)
Jan. 2021 – Present (8th & 9th semesters) Last semester GPA: 3.64/4.00 (18.47/20.00) Mechanical Engineering, Amirkabir University of Technology (Tehran Polytechnic) (Ranked 2nd among best universities in mechanical engineering in Iran according to THE World University Rankings)
Sep. 2018 – Jan. 2021 (3rd – 7th semesters as a guest student) GPA of five semesters: 3.17/4.00 (15.51/20.00) Mechanical Engineering, University of Kashan Sep. 2017 – Sep. 2018 (1st & 2nd semesters) GPA of two semesters: 3.45/4.00 (16.66/20.00)
High school
Diploma Total GPA: 18.87/20.00
Allameh Helli of Tehran, Mathematics and Physics Sep. 2013 – Sep. 2017
RESEARCH INTEREST
Finite element methods
Fatigue and Fracture Analysis
Smart materials
Composite materials
Shape memory alloys
Biomechanics
Bone fracture and regeneration
Stress distribution analysis
PUBLICATIONS
Journal Papers
M. Khodabakhsh Majd, M. Bahrami, A. Nouri, and M. Haghbin Nazarpak, “A Finite Element Comparison Between Two Sizes of NiTi Commercial Staples, Used in Scaphoid Fracture Fixation,” To be published in Materials Science (Translation of the peer-reviewed Ukrainian journal Fizyko-Khimichna Mekhanika Materialiv) (Submitted and Accepted) M. Khodabakhsh Majd, M. Bahrami, A. Nouri, and M. Haghbin Nazarpak, “A Finite Element Comparison Between Three NiTi Bone Staples with Different Bridge Shape Used in Scaphoid Fracture Fixation,” (In Preparation) M. Arefi, M. Bahrami, A. Rafiei, “Investigating the behavior of Microplate Reinforced with functionally graded (FG) graphene nanoplatelets (GNPs),” (In Preparation)
Conference Papers
M. Khodabakhsh Majd, M. Bahrami, A. Nouri, and M. Haghbin Nazarpak, “A Finite Element Comparison Between Two Sizes of NiTi Commercial Staples, Used in Scaphoid Fracture Fixation,” Proceedings of MSSE 2021 Conference, Sep. 22-24, 2021, pp. 78-81. (Published)
2 | MEHRAN BAHRAMI
RESEARCH EXPERIENCES
Research Assistant Optimizing SMA staple to improve bone fracture fixation Professor: Dr. Alireza Nouri
Microplate reinforced with functionally graded graphene nanoplatelets (GNPs) Professor: Dr. Mohammad Arefi
TEACHING EXPERIENCES
Teaching Assistant Statics
Mechanical Engineering Department of University of Kashan, Kashan, Iran Feb. 2021 – Present (Two semesters) Professor: Dr. Saeed Amir
Lecturer and holding weekly classes
Developing and correcting quizzes, assignments, and midterm exams
Mechanics of Materials I Mechanical Engineering Department of University of Kashan, Kashan, Iran Sep. 2021 – Present (One semester) Professor: Dr. Mehdi MohammadiMehr
Lecturer and holding weekly classes
Developing and correcting quizzes, assignments, and midterm exams
WORK EXPERIENCES
Internship Iran Khodro Diesel Company (IKD) Bus Manufacturing Hall, Tehran, Iran Duration: 210 hrs. | Total Grade: 19.00/20.00 Professor: Dr. AliAkbar Abbassian
PRESENTATIONS AND INVITED LECTURES
Conference Paper Presentation, “A FINITE ELEMENT COMPARISON BETWEEN TWO SIZES OF NiTi COMMERCIAL STAPLES, USED IN SCAPHOID FRACTURE FIXATION,” MSSE 2021 Conference, Sep. 23, 2021
AWARDS & HONORS
Ranked within the top 10% among graduating class based on GPA of the last year of the bachelor’s degree, Mechanical Engineering Department, University of Kashan, Kashan, Iran
Received full scholarship (tuition waiver) from the University of Kashan for bachelor of science degree
Ranked within under 3% among more than 150000 participants in Iranian University Entrance Exam for bachelor of science degree
Educated in Allameh Helli of Tehran high school and secondary school, which are under the supervision of the National Organization for Development of Exceptional Talents (SAMPAD), 2010 – 2017
ACADEMIC PROJECT
Designing, modeling, and finite element analysis of a commercial heavy cable hoist using SolidWorks, MATLAB, and ABAQUS | Course: Mechanical Engineering Design II | University of Kashan | Aug. 2021
Designing numerous mechanical devices (Helical, Spur, Bevel, and Worm Gears, Chains, Clutch and Brakes, Belts, Ball Bearings) | Course: Mechanical Engineering Design II | University of Kashan | Aug. 2021
Developing FEM code for analysis of a general 2D truss structure under general mechanical and thermal loading using MATLAB and comparing the output data with model generated by ABAQUS| Course: Finite Element Methods | Amirkabir University of Technology | Sep. 2020
3 | MEHRAN BAHRAMI
Case study of a cantilever beam behavior using four theories (Euler-Bernoulli beam theory, Timoshenko beam theory, Elasticity Method (Mechanics of Materials III), Finite Element Method) and Mathematica software | Course: Mechanic of Materials III | University of Kashan | Sep. 2020
Investigating the behaviors of a four-link robot using two independent phases in MATLAB and SIMULINK Course: Advanced Dynamic | Amirkabir University of Technology | Aug. 2020
Designing and modeling a rotating metallic shaft using CATIA and MATLAB | Course: Mechanical Engineering Design I | Amirkabir University of Technology | Sep. 2019
PROFESSIONAL TRAINING
Workshop Auto Mechanic Workshop University of Kashan | Duration: 32 hrs. | GPA: 4.00/4.00 (20.00/20.00) Welding and Sheet Metals Workshop University of Kashan | Duration: 32 hrs. | GPA: 4.00/4.00 (19.25/20.00) Machinery and Tools Workshops University of Kashan | Duration: 32 hrs. | GPA: 4.00/4.00 (18.50/20.00) Dynamics & Vibration Lab University of Kashan | Duration: 16 hrs. | GPA: 4.00/4.00 (18.00/20.00) Thermodynamics Lab Amirkabir University of Technology (Tehran Polytechnic) | Duration: 16 hrs. GPA: 4.00/4.00 (19.30/20.00) General Physics Lab University of Kashan | Duration: 16 hrs. | GPA: 4.00/4.00 (20.00/20.00)
Certification Mechanical Design by SOLIDWORKS II Tehran Institute of Technology | Duration: 50 hrs. | Grade: 95/100 | May 2021
ABAQUS I Tehran Institute of Technology | Duration: 45 hrs. | Grade: 100/100 | June 2021
Programming in MATLAB Tehran Institute of Technology | Duration: 32 hrs. | Grade: 98/100 | Dec. 2020
Mechanical Design by CATIA I Tehran Institute of Technology | Duration: 64 hrs. | Grade: 95/100 | Sep. 2018
SELECTED COURSES
Mechanics of Material I & II & III
Composites
Engineering Graphics I & II
Manufacturing methods and workshops
Dynamic
Finite Elements Methods
Material Science
Mechanical Engineering Design I & II
SKILLS
Languages Persian Native English Fluent (IELTS test to be taken on Nov. 8) German Intermediate (B1)
Simulation and
Design Software
ABAQUS Advanced SolidWorks Advanced CATIA Intermediate AUTOCAD intermediate
Programming
Languages
MATLAB Advanced C/C++ Intermediate Mathematica Intermediate
4 | MEHRAN BAHRAMI
REFERENCES
Dr. Alireza Nouri, Lecturer and Researcher Department of Biomedical Engineering Amirkabir University of Technology (Tehran Polytechnic) Email: alireza [email protected]
Dr. Mehdi MohammadiMehr, Professor Department of Mechanical Engineering University of Kashan Email: [email protected]
Dr. Mohammad Arefi, Associate Professor Department of Mechanical Engineering University of Kashan Email: [email protected]