meets the buy american act mortise locks · 2019. 9. 3. · 1 = one hole for deadbolt or latchbolt...
TRANSCRIPT
MORTISE LOCKS
M Series Extra Heavy Duty Models
Marathon HardwareMeets The Buy American Act
2
Contents
A. MORTISE LOCK CUTAWAY VIEW __________________________________3B. SPECIFICATIONS & DIMENSIONS _________________________________4
C. MODELS & ANSI FUNCTION NUMBERS ____________________________5
D. ELECTRIFIED MORTISE LOCKS __________________________________15
E. LEVER TRIMS - ROSE DESIGN ___________________________________16
- WIDE ESCUTCHEON DESIGN ______________________18- NARROW ESCUTCHEON DESIGN __________________20
F. ROSE, ESCUTCHEON, AND THE OTHERS _________________________22
G. CYLINDERS, STRIKES AND ARMOR FACEPLATES __________________ 23H. PUSH -PULL TRIM WITH MORTISE LOCK __________ (Coming Soon)__ 24I. MORTISE DEADLOCKS _________________________________________ 26
J. DOOR HANDING ______________________________________________28
K. HOW TO ORDER INFORMATION _________________________________29
L. FINISH CLASSIFICATION _______________________________________30
Extra Heavy Duty
MORTISE LOCKS c@us LISTED
Our Heavy Duty Mortise Locks comply with American National Standard Institute requirement (ANSI/ BHMA A156.13 - 2005 Grade 1 ). We offer a full range of multiple models to meet different demand for commercial, institutional and industrial applications.
Armor Faceplate Brass or stainless steel
1" Throw Deadbolt Stainless steel
3/4" Latchbolt Stainless steel
Anti-friction Tongue Stainless steel
A Toggle button
Features:
• Full reversible design.
Captured Cylinder Set Screw
• No exposed mounting screws on outside and inside trims.
6-pin Solid Brass Cylinder
Lock Case
I' / Wrought plated steel,
/ corrosion resistance
Lever and Rose Trim No exposed screws
/
• Can retrofit American Schlage L9000 Series mortise lock bodies. • Outside lever is Clutch Freewheeling design. The lever rotates when the lever is locked preventing
excessive force from being applied to the horizontal level. This design can decrease the lever to be broken or damaged.
3
Marathon Hardware
4
Specifications: For Doors
Lock Hand
Backset
Lock Case
C toC
Annor Faceplate
Deadbolt
Latchbolt
Auxiliary Latch
Toggle Button
Trims
Strike
Cylinders
Masterkeying
Finishes
1-3/4" thick standard. For doors over 1-3/4" specify door thickness
Lock bodies are easily field reversible, no need to specify hand when ordering
2-3/4" only
Heavy duty wrought steel, zinc dichromate plated
� lever to � cylinder is 3-7 /8"
Brass or stainless steel; 8" x 1-7/32" ; ANSI Standard A115.1
1" throw; hardened stainless steel
3/4" throw; one-piece stainless steel with anti-friction reversible tongue Stainless
steel, non-handed
High rust-resistant chrome plated zinc alloy
As specified, see page 16 - page 2 2
Brass or stainless steel; ANSI Standard A 115.1; curve lip with dust box
As specified, see page 24. When needed to meet key requirement, buyers may use any brand mortise cylinder, our lock case can receive cylinders from other manufacturers
Master keying construction available
US3,4, 10,108, 15,26,26D,32,32D
Certifications: ANSI/BHMA MeetANSI/BHMAA156.13 Series 1000 Grade 1 requirement
UUcUL UL and UL Listed to Canadian safety standard for A label (3-hour fire door); stamped letter F and UL symbol on armor faceplate
Positive Pressure Meet positive pressure requirements UL 10C and UBC 7-2 (1997)
Dimensions:
e
r
t1·'18"--t
I 2e.o) I
J-7/16" ,.L
--tr'"'.lj (5.eJ
(��.-+--+----,,oj,,_J
Marathon Hardware
MODELS & ANSI FUNCTION NUMBERS
Armor Faceplate ------ll-l-0
Thumbturn
Inside Lever
Product Identification
M 3 4 15
Mortise Cylinder
Outside Lever
Deadbolt Auxiliary Latch Latch bolt Toggle Button
T Function Number:
01 - 34 ANSI numbers Others Our function numbers
Deadbolt Function numbers: 4 = With Deadbolt 0 = No Deadbolt
�-------- Number of bolt hole in Annor Faceplate•
0 = Faceplate has no hole i.e. Dummy Trim
1 = One hole for deadbolt or latchbolt
2 = One hole for deadbolt one hole for latchbolt or one hole for auxiliary latch, one hole for latchbolt
3 = One hole for deadbolt, one hole for latchbolt, one hole for auxiliary ,atch or toggle button
4 = 4 holes for all function model
�---------- Mortise Lock Series
• Details see page 23
5
Marathon Hardware
6
All PuRpose Lock
Model No.: M4486
* Latch bolt retracted by lever from either side unless outside lever is locked (made inoperative) by operating toggle button
* Dead bolt projected or retracted by key outside or thum bturn inside
* Key outside operates both bolts * Operating inside lever retracts both dead bolt and
latch bolt simultaneously * To lock toggle button, outside lever is inoperative
To unlock toggle button, outside lever is operative * Latch bolt is deadlocked when outside lever is
locked (inoperative) or when dead bolt is projected * Outside lever is unlocked by toggle button only
when dead bolt is retracted * Inside lever is always free for immediate exit * Auxiliary latch deadlocks latch bolt when door is
closed
ANSI
�
Honl CuesT Lock
Model No.: M341 5
• Hotel cylinder required with two types of keys (standard key
and emergency key)
• Standard key outside retracts latch bolt only, will not retract
or project dead bolt
• Emergency key outside will retract latch bolt and dead bolt,
also project dead bolt
* Latch bolt retracted by key outside or lever inside * Outside lever is always inoperative * Dead bolt projected or retracted by inside thumb
turn * When dead bolt is projected, key outside becomes
inoperative except emergency key * Operating inside lever retracts both dead bolt and
latch bolt simultaneously * Auxiliary latch deadlocks latch bolt when door is
closed * Inside lever is always free for immediate exit
(Original listed model no.: M3485)
Marathon Hardware
ANSI
CLASSROOM SEcuRiTy INrnudrn DEAd bolT Lock
Model No.: M3434
• Latch bolt retracted by lever from either side unless outside lever is locked
by key from inside or outside
• Dead bolt projected or retracted by key outside
• Operating inside lever retracts both dead bolt and latch bolt simultaneously,
and unlock outside lever
• Auxiliary latch deadlocks latch bolt when door is closed, or latch bolt is
deadlocked when dead bolt is projected
• Inside lever is always free for immediate exit
ENTRANCE Lock
Model No.: M3485
• Latch bolt retracted by lever from either side unless outside lever is locked
by key from outside
• Dead bolt projected or retracted by key outside
• Latch bolt retracted by key outside
• Operating inside lever retracts both dead bolt and latch bolt simultaneously
• Dead bolt projected or retracted by inside thumbturn
• When dead bolt projected by inside thumbturn, outside lever becomes
inoperative automatically
• Inside lever is always free for immediate exit
• Auxiliary latch deadlocks latch bolt when door is closed (Original listed model no. M3485A)
7
Marathon Hardware
ANSI
8
DonMiTony OR Exh Lock
Model No.: M3411
• Latch bolt retracted by lever from either side unless outside lever is locked (made inoperative) by operating toggle button
• Dead bolt projected by key from either side • Dead bolt retracted by key outside • Operating inside lever retracts both dead bolt and latch bolt simultaneously.
and outside lever remains locked
ApARTMENT CoRRidoR DooR Lock
Model No.: M3420
• Latch bolt retracted by lever from either side unless outside lever is locked (made inoperative) by operating toggle button
• Dead bolt projected and retracted by key outside or thumbturn inside • Key outside operates dead bolt and latch bolt, and outside lever remains locked • Operating inside lever retracts both dead bolt and latch bolt simultaneously
(when dead bolt is projected), and outside lever remains locked • Latch bolt is deadlocked when outside lever is locked (made inoperative) or
when dead bolt is projected • When dead bolt is retracted, outside lever is unlocked by toggle button • Inside lever is always free for immediate exit
Marathon Hardware
ANSI
0FFice oR ENTRY Lock
Model No.: 3004
• Outside lever retracts latch bolt unless outside lever is locked (made inoperative) by operating toggle button
• Latch bolt retracted by key outside and inside lever when outside lever is locked
• Outside lever is locked and unlocked by toggle button
• Key outside locks outside lever only
• When latch bolt is retracted by inside lever, outside lever remains locked
• Auxiliary latch deadlocks latch bolt when door is closed
• Inside lever is always free for immediate exit
ANSI
CLASSROOM SECURiTy
INTRUdER LATch boh Lock
Model No.: M 2032
• Latch bolt retracted by lever from either side unless outside lever is locked by key from either side
• When outside lever is locked, latch bolt retracted by key outside or lever inside
• Turning key from either side locks and unlocks outside lever
• Auxiliary latch deadlocks latch bolt when door is closed
• Inside lever is always free for immediate exit
9
Marathon Hardware
ANSI
�
10
CLASSROOM Lock
Model No.: M 2005 * Key outside locks and unlocks outside lever
* Outside lever retracts latch bolt unless outside lever is locked by key
* When outside lever is locked, unlocked from outside by key or by inside lever
* Inside lever is always free for immediate exit
* Auxiliary latch deadlocks latch bolt when door is closed
STOREROOM OR ClosET Lock
Model No.: M 2007 * Latch bolt retracted by key outside or by lever inside
* Outside lever is always inoperative
* Inside lever is always free for immediate exit
* Auxiliary latch deadlocks latch bolt when door is closed
ApARTMENT ENTRANCE Lock, Public Toiln Lock
Model No.: M 2009 * Latch bolt retracted by lever from either side unless outside lever is locked by key
from inside
* Key inside locks and unlocks outside lever
* When outside lever is locked, latch bolt retracted by key outside or by lever inside
* Auxiliary latch deadlocks latch bolt when door is closed
* Inside lever is always free for immediate exit
AsyluM OR INsTiTuTioN Lock
Model No.: M 2030 * Latch bolt retracted by key from either side
* Levers on both sides are always inoperative
* Auxiliary latch deadlocks latch bolt when door is closed
(Original listed model no.: M2082)
Marathon Hardware
ANSI
�
�
ANSI
�
DoRMiTORY OR ExiT Lock
Model No.: M 2413
• Latch bolt retracted by lever from either side when
dead bolt is in retracted position
• Dead bolt projected or retracted by key outside or
thumbturn inside
• Projecting dead bolt locks outside lever
• When dead bolt is projected, operating inside lever
retracts both dead bolt and latch bolt simultaneously
ClosET OR STOREROOM Lock
Model No.: M 2465 • Latch bolt retracted by lever from either side
• Dead bolt projected or retracted by key outside
STORE DooR Lock
Model No.: M 2414 • Latch bolt retracted by lever from either side
• Dead bolt projected or retracted by key from either side
• Latch bolt and dead bolt are independent of each other
RooM DooR Lock
Model No.: M 2421 • Latch bolt retracted by lever from either side
• Dead bolt projected or retracted by key outside or thumbturn inside
• Latch bolt and dead bolt are independent of each other
CLASSROOM SEcuRiTy INTRUdER DEAd boh Lock
Model No.: M 2433 • Latch bolt retracted by outside lever unless outside lever is locked by key
from inside or outside
• Dead bolt projected or retracted by key outside
• Operating inside lever retracts both dead bolt and latch bolt simultaneously,
and unlock outside lever
• Inside lever is always free for immediate exit
11
Marathon Hardware
12
ANSI
PRivAcy BedRooM OR BArh Lock
Model No.: M2419
• Latch bolt retracted by lever from either side • Dead bolt projected or retracted by inside thumb
turn * Projecting dead bolt locks outside lever • Operating inside lever retracts both dead bolt and
latch bolt simultaneously, and unlock outside lever • Removing outside Emergency Release retracts
dead bolt (i.e. to remove a round plate as shown from outside, then insert a Philips tip screwdriver into access hole and rotate to unlock door)
• Inside lever is always free for immediate exit
ANSI
G£J PASSAGE LATclt
Model No.: M 1001
• Latch bolt retracted by lever from either side at all times
• Inside lever is always free for immediate exit
PRiVAcy BedRooM OR BATh Lock
Model No.: M 1022
• Latch bolt retracted by lever from outside unless outside lever is locked by inside thumbturn
• Operating inside lever retracts latch bolt and unlocks outside lever
• Removing outside Emergency Release unlocks outside lever
• Turning inside thumbturn locks and unlocks outside lever
• Inside lever is always free for immediate exit
Marathon Hardware
ANSI
rn
rn
rn
m
DEAd Lock-DoublE CyliNdER
Model No.: M 1416
• Dead bolt projected or retracted by key from either side
DEAd Lock-CyliNdER & TltuMbTURN
Model No.: M 1417
• Dead boll projected or retracted by key outside or thumbturn inside
DEAd Lock-SiNGLE CyliNdER
Model No.: M 1418
• Dead bolt projected or retracted by key from outside
• No trim on opposite side
ClAssnooM Du.d Lock
Model No.: M 1 429
• Dead bolt projected or retracted by key from outside
• Inside thumbturn cylinder retracts dead bolt but cannot project it
(Original listed model no.: M1463)
13
Marathon Hardware
14
SiNGlE DUMMY TRiM
Model No.:M0071
• Lever on one side fixed by mounting bar, it is always rigid
• Lever only used as door pull
DoublE DuMMY TRiM
Model No.:M0072
• Lever on both sides fixed by mounting bar and are always rigid
• Lever only used as door pull
SiNGlE DuMMY lRiM WiTh Lock CAsE
Model No.:M0075
• Lever on one side fixed on door surface, it is always rigid
• Includes lock case and armor faceplate
DoublE DuMMY TRiM WiTh Lock CAsE
Model No.:M0076
• Lever on both sides fixed on door surface and are always rigid
• Includes lock case and armor faceplate
Marathon Hardware
ELECTRIFIED MORTISE LOCKS
Applications: Security and restricted access areas in cashier rooms, computer rooms, hospital equipment, engineering rooms, laboratories, radar control rooms, telephone equipment rooms, narcotics rooms and any security control centers.
Regulating Devices: This lock can be used by keypad access controls, access card readers, security consoles, automatic time devices and computerized controls.
All installations should be in accordance with your local electrical codes or National Electrical code NFPA 70 in USA.
Electrical Requirements: Voltage: 12VDC or 24VDC Current: 0.3A at 24VDC or 0.6A at 12VDC Operation Temperature: Max. +140"F (+60°C), Min. -22"F (-30"C) Replacement Kit: 1632-PT Solenoid
Electrified Functions:
2081
Fail Safe: Power ON lod(s outside lever
2083
2082
Fail Secore: Power OFF unlocks outside lever
2084
Electrically Locked (Falt Safe), Model No. 2081 Electrically Unlocked (Fall Secure), Model No. 2082
• 2081 - Power ON, outside lever is locked continuously by solenoid
• 2082 - Power OFF, outside lever is unlocked by solenoid
• Key outside retracts latch bolt when outside lever is locked
• Outside lever retracts latch bolt except when outside lever is locked
• Inside lever is always free for immediate egress
• Auxiliary latch deadlocks latch bolt when door is closed
Electrically Locked (Fail Safe), Model No. 2083 Electrically Unlocked (Fall Secure), Model No. 2084
• 2083 - Power ON, both levers are locked by solenoid simultaneously
• 2084 - Power OFF, both levers are unlocked by solenoid simultaneously
• Key on either side retracts latch bolt when both levers are locked
• Lever from either side retracts latch bolt except when both levers are locked
Fail Safe: Power ON locks bothleve,s
Fa� Secure: Power OFF unlocks both levers
• Lever cannot be locked separately, only together
• Auxiliary latch deadlocks latch bolt when door is closed
CAUTION: Model No. 2083 (Fall Safe function) Is not recommended for use on any door for "//fe safety· for exit.
15
Marathon Hardware
16
LEVER TRIMS
ROSE DESIGN
4-f/2"
.J T
I�)
Lever Material
Lever type Lever material options
No. 01 Forged brass or bronze, cast stainless steel, or cast zinc alloy •
No. 05 Forged brass or bronze, cast stainless steel, or cast zinc alloy •
No. 13 Forged brass or bronze, cast stainless steel, or cast zinc alloy *
No. 17 Forged brass or bronze, cast stainless steel, or cast zinc alloy *
No. 02 Hollow/solid tube, extruded or cast stainless steel
No. 18 Hollow tube, extruded stainless steel
I- -oj
L 3-311&" (:j\- {81mm)
'2:71871 (73mm)
�J,;,.
(11\lrrmJ
j__
1-,:,,,;J 181mm)
LR02
LR13
LR18
• Lever type No. 01, 02, 17 meet California State Fire Marshall Standard.
• Lever costs vary depending upon material used. When asking a quote, please indicate your material choice: Forged Brass/Bronze (BR), Cast Stainless Steel (SS), Cast Zinc Alloy (ZA).
• All lever trims and knob trims are available in the finishes: US3, US4, US10, US10B, US26, US26D, US32, US32D. Special finish request is workable, but MOQ per ordered shipment is required.
• If a complete unit of mortise lock is ordered, the escutcheon design of both lever and knob trims does not use a cylinder guard as the cylinder is protected by escutcheon. The cylinder guard is just used for the rose design of both lever and knob trims, but it is not a included part. Details see page 23.
Marathon Hardware
Mortise Lock with Rose & Lever Trim
Trim Type No. LR01
This Mortise Lock is model number M3485-LR01 Entrance Lock shown, which is coupled with round rose trim and lever type no. 01. It is available in all BHMA finishes.
17
Marathon Hardware
18
L ESCUTCHEON DESIGN - Wide Style
112· (12.Srrwn) -11--
1 p!,= 8• (112mm)
(203mm) l_
l 1-- ---1 2-7116" (62mm)
0-
112· (12.Srrwn) --11--
I�, ... ,12· 8" (114rm,}
(20
r
m) _1_
I- -I 2-29/32" (74mm)
0-
112"
(12.5mm) -II-
a· (117.5mm) 1 pt�
(2
T
m) 1
I- ..... 2-29132" (74mm)
0-
LE01
Q
LEOS
(@)
LE17
�
112"
(12.5mm) -u--
ip,Iw 8" (132mm)
(203mm) j_
1 1----1 3-3/16"
(61mm)
0-
112· (12.5mm) -11---
(119mm) ip.t. (2
"f
m) j_
1-- --l 2-718"
{73mm)
0-
112" (12.5mm) -I I-
8" 4-11/16"
l}r(20
I
m) (11rm,
l-----1 S.3/16"
(81mm)
0-
LE02
(@)
LE13
(@)
LE18
�
Marathon Hardware
Mortise Lock with Escutcheon & Lever Trim
Trim Type No. LE02
This Mortise Lock is model number M4486-LE02 All Purpose Lock shown, which is coupled with wide escutcheon trim and lever type no. 02. It is available in all BHMA finishes.
19
Marathon Hardware
20
N ESCUTCHEON DESIGN - Narrow Style
1/2" (12.5mm)
--1 I+-
1 t 4-13/32"
8" (112mm) (203mm) j__
l f--1 2-7/16"
(62mm)
�
1/2" (12.5mm) -+II+-
1 T 4-1/2. 8" (114mm)
(203mm)
l I- -+I 2-29/32" {74mm)
�
1/2" (12.5mm) --1 I-
I 8"
(203mm)
l I+-- -+l 2-29/32" (74mm)
j_
4-5/8"
(11_-5mm)
NE01 1/2" (12.5mm) -II-
� 1 8"
(203mm)
1 1-- ------13-3/16" (81mm)
�
NE05 1/2" (12.5mm) -+j I+-
� 1 8"
T 1--l
2-7/8" (73mm)
�
NE17 1/2"
(12.5mm) -ii+-
I 8"
(203mm)
1 I- -+I 3-3/16"
(81mm)
�
NE02
T
� 5-1/32" (1j_mm)
NE13
T
�4-11/16"
(119mm) l
NE18
T
� 4-11/16" (119mm)
j_
Marathon Hardware
Mortise Lock with Escutcheon & Lever Trim
Trim Type No. NEOS
This Mortise Lock is model number M2413-NE05 (F13)Dormitory or Exit Lock shown, which is coupled with narrow escutcheon trim and lever type no. 05. It is available in all BHMA finishes.
21
Marathon Hardware
ROSE, ESCUTCHEON, AND THE OTHERS
120 ROUND ROSE 2-7/16" diameter, 13/32" projection, Wrought stainless steel Specify finish when ordering
132 THUMBTURN Base: 1-23/32" diameter Turnpiece: 1-9/16" long Material: stainless steel Specify finish when ordering
146 EMERGENCY RELEASE Base: 1-23/32" diameter Material: stainless steel Specify finish when ordering
N ESCUTCHEON Material: Cold forged brass,
bronze Size: 8" x 1-27/32" x 1/2" Finishes: US3, US4, US10,
US108, ����b US26D, US32, and
L ESCUTCHEON Material: Wrought stainless
steel Size: 8" x 2-9/16" x 1/2"
Finishes: US3, US4, US10, US108,
����b US26D, US32, and
210 SPINDLE Material: square steel Finish: Rust-resistant zinc dichromate plated NOTE:
211 SPRING CAGE Round design, use for L Escutcheon trim, Cast zinc housing. Zinc plated
212 SPRING CAGE Square design, use for N Escutcheon trim, Cast zinc housing Zinc plated
250 CYLINDER GUARD 1-23/32" diameter, 9/32" projection, Standard for 1-1/8" mortise cylinder use. Wrought stainless steel
252 CYLINDER GUARD 1-11/16" diameter, 7/16" projection. Available for use with 1-3/8" mortise cylinder use Material: Cast zinc alloy Order separately
255 CYLINDER GUARD 1-25/32" diameter, 21/32" projection. Available for more longer mortise cylinder use. Material: Cast zinc alloy, Order separately
258 WAVE SPRING Used with cylinder guard as spacer; included with above cylinder guards when ordering
When ordering the ancillary parts such as cylinder guards, round rose, thumbtum, emergency release plate, and escutcheons, must specify finish. All these parts are available in US3, US4, US10, US108, US26, US26D, US32, US32D.
22
Marathon Hardware
CYLINDERS
23
STANDARD MORTISE CYLINDER
No. 526 No. 527
1-1/8"1-1/4"
Material: Cylinder body: Solid brass Cylinder face: Brass or stainless steel Cylinder cam is comparable with Schlage L583-254 as shown.
Face finishes: US3,US4,US10,US10B, US26,US26D US32, US32O
INTERCHANGEABLE CORE ( IC ) CYLINDER
No. 206 6-pin No. 208 7-pin
Face finishes:
1-1/4"1-3/8"
US3, US4,US10,US10B, US26,US26D US32, US32O
This interchangeable core (IC) cylinder offers immediate rekeying at door simply by using the special "control key " to replace the core in seconds, it is unnecessary to remove a cylinder.
To order IC cylinder less core, add suffix NIC with the item number such as 208NIC
• Above cylinders can be masterkeyed and grand masterkeyed, construction keying is also available.
INTERCHANGEABLE CORE ONLY
No. 106 6-pin No. 108 7-pin
Available US4 (606), US26D (626) finish only.
This core is compatible with cylinder manufacturers such as Falcon, Best Arrow, KeyMark and Schlage. Cams are easily changeable.
THUMBTURN CYLINDER
No. 522 No. 523
RH (Right Hand) LH (Left Hand)
This cylinder is for classroom function and deadlocks use. It is handed. The cylinder furnished with Schlage cam # L583-254. 1-1/8" length standard. Specify finish when ordering
STRIKE & ARMOR FACEPLATE
0
D
0
CURVED LIP STRIKE (STANDARD) No. 617
Material: 100% stainless steel, brass
Finishes: US3, US4, US10, US10B US26,US26D,US32, US32D
This strike is not available to use on the double doors with overlapping astragal. If so, specify to change the plain strike when ordering.
PLAIN STRIKE No.618
Material: 100% stainless steel, brass Finishes: US3, US4, US10, US10B
US26,US26D,US32,US32D
This strike is for deadlocks (F16, F17, F18) and classroom (F29) function use, or double doors with overlapping astragal use.
STRIKE BOX
No. 215
Plastic material with blank finish Mounting face: L 4-3/4" x W1 -3/16"
ARMOR FACEPLATE
Material: 100% stainless steel, brass
D
2
0 0
0 0
D D 0 0 0
3 4 5
0
CJ
D 0 0
6
0
0
7
0 0 0
8
Specify part numbers when ordering separately. See following chart for the part numbers:
Item Part No. ANSI Functions or model No.
1 621 F16, F17, F18, F29
2 622 F01, F22
3 623 F13, F14, F19, F21, F33
4 624 F05, F07, F09,F30, F32
5 625 F11,F20
6 626 F04
7 627 F15, M3485, F34
8 628 M4486
Marathon Hardware
PUSH-PULL TRIM WITH MORTISE LOCK
This push-pull trim was designed for Its easy operation to open hospital room doors for patients protection in case of fire. The wider handle integrated with a mortise lockcase provides wonderful versatility. The trim popularly used in hospitals and health care centers, now it can use in disabled restrooms, laboratories, operating rooms, and any other buildings where require more convenience, durability or security applications.
Features:
• The push-pull trim can be mounted in vertical (up or down) and horizontal orientations in field, see NOTE
• Through-bolted design for trims with lock-case in stability • Handling is easily field reversible • Fits for 1-3/4" thick standard RHR or LHR hollow metal doors
& wood cfoors, other than standard 1-3/4" is available but specify door thickness when ordered.
• Push-Pull trim is non-handed, easy installation • Mortise lock functions available (recommended): F01, F04,
F0S, F09, F11, F13, F14, F19, F20, F22, F30. Details see next page
• Handles are cast stainless steel, corrosion protected • Patented in USA and UL listed • Available in BHMA finishesNote: When cylinders are used, the handles MUST be mounted in
���7s0{h�0:����!fu���h�� m��ti��ifn��� !
his�ct°
unting
Designate hand and how handles are to be mounted that is PUSH down from inside of door, PULL up from outside of door
Multiple Mounting Hands:
Both Levers Up Both Levers Down Push Up Push Down Pull Down Pull Up
�r ��A¥� Push Up Push Down Push Horizontal Push Horizontal Pull Horizontal Pull Horizontal Pull Down Pull Up
���AF�
24
Marathon Hardware
Model Number:
Our HL22 Push-Pull Trim can use with Schalge L Series Heavy Duty Mortise Locks, customers may just order HL22 Push-Pull Trim Only to use with Schlage mortise locks or to retrofit its existing installations. For other brand mortise locks such as Arrow, Best, Falcon, Sargent, Yale are also available, but need to consult our factory ij customer has his requirement.
The model numbers of HL22 Push-Pull Trim with our M Series Heavy Duty Mortise Locks are listed below:
ANSI No. THASE
Function Function Description Model Number
F01 M1001 -HL22 Passage Latch Detail see page 12
F04 M3004- HL22 Office or Entry Lock Detail see page 9
F05 M2005- HL22 Classroom Lock Detail see page 10
fog M2009- HL22 Apartment Entrance Lock,
Detail see page 10 Public Toilet Lock
F11 M3411 - HL22 Dorrnttory or Exit Lock Detail see page 8
F13 M2413- HL22 Dormitory or Exit Lock Detail see page 11
F14 M2414 -HL22 Store Door Lock Detail see page 11
F19 M2419- HL22 Privacy Bedroom, Bath Lock, Detail see page 12
F20 M3420-HL22 Apartment Corridor Door Lock Detail see page 8
F22 M1022 - HL22 Privacy Bedroom, Bath Lock, Detail see page 12
F30 M2030-HL22 Asylum or Institution Lock Detail see page 10
For other Classroom Security locks use, see page 7, 9 and 11.
Handle Handing:
Cylinder Operation: Handle on cylinder side must be mounted in down or horizontal position, shown as below.
Thumbtum operation:
If a standard thumbturn (Type No. 132) is provided, the inside handle must be mounted in horizontal position. If a special thumbtum (Type No. 133) is provided, the inside handle can be mounted in down position. Specify the thumbturn type when ordering.
25
This Push-Pull Trim with heavy--duty mortise lock is model number M241J..Hl22 (ANSI function no. 13) DormitOfY or Exil Lock shown, which uses a standard rhumbtum Type No. 132 and along with an inside wider handle in hOrizonta! pogllion.
THURMBTURN
Type No.133
Marathon Hardware
Heavy Duty Small Lockcase
MORTISE DEADLOCKS
Our SM Series Mortise Deadlocks are ideal for use in restrooms and small doors in public utilities (electric meter cabinets, or gas meter cabinets in commercial buildings). The locks offer more high security when used as auxiliary deadbolt in other applications.
Armor Faceplate Brass or stainless steel
1" (25mm) Throw Deadbolt Stainless steel, Resists end pressure when thrown
Dimensions=
216 Strike Box 672 Deadlock Strike
6-pin Solid Brass Cylinder
------ Lock Case
671 Armor Face Plate
Wrought steel, Corrosion protected
Dimensions in ( ) are millimeters.
26
Marathon Hardware
27
Specifications:
Applications
Backset
Hand
Lock Case
Faceplate
Strike
Deadbolt
Cylinder
Finishes
Mortise installation for 1-3/8" or 1-3/4" doors, specify door thickness if other than standard 1-3/4" 2-3/4"
Universal ; adjustable lock front to accommodate beveled or flat-edged doors
Heavy wrought steel, zinc plated
Stainless steel, 5-5/8" x 1-7/32"
Stainless steel, 3-1/2" x 1-1/8"
1" throw, stainless steel, strong against cutting or sawing
Not included. When need to meet key requirement, buyers may use any brand mortise cylinder, our lock case ca� receive cylinders from other manufacturers
Most popular finishes are available, see page 30
Certifications:
UUcUL UL and UL Listed to Canadian safety standard for A label (3-hour fire door); stamped letter F and UL symbol on armor faceplate
Positive Pressure Meet positive pressure requirements UL 10C and UBC 7-2 (1997)
Models: SM140 Cylinder & Thumbturn
�
�
Outside Inside
Deadbolt thrown or retracted by key outside or thumbtum inside.
SM141 Classroom Lock
Outside Inside
Deadbolt thrown or retracted by key from outside. Inside thumbtum cylinder retracts deadbolt but cannot project it.
SM142 Single Cylinder
�
�
Outside Inside
Deadbolt thrown or retracted by key from outside. No trim on opposite side.
SM145 Door Bolt
Outside Inside
Deadbolt thrown or retracted by thumbtum inside. No trim on opposite side.
(Original UL listed model numbers are QML 180, 182, 184 and 186)
SM143 Double Cylinder
Outside Inside
Deadbolt operated by key from either side.
SM146 Deadbolt with "OCCUPIED" Indicator
Outside Inside
Deadbolt thrown or retracted by thumbtum inside. When deadbolt is thrown, "OCCUPIED" plate is displayed on outside.
Marathon Hardware
DOOR HANDING
The hand of our heavy-duty mortise lock can be re-handed by seller or installer quickly and easily without opening the lock body. Just two simple steps are required to change the hand of our mortise lock as follows. This feature allows the buyers and every distributor to order it as stock and customize the handing to meet each order's requirement.
1. Change latch bolt handing If the hand of latch bolt does not match door hand, remove fixing screw and pull latch bolt out from lock case, then turn complete unit having the bevel of latch bolt to reverse door handing. Position latch bolt and fasten it.
2. Set outside hand of chassis (lock case set) There are two catch screws of lock hand on both sides of chassis. Take catch screw out from one side of chassis which is going to face outside of door. And another catch screw must always be on inside of the chassis. For RH and RHRB, the catch screw will be on the lock case side. For LH and LHRB, the catch screw will be on the lock
case cover side. LOCK CASE
LOCK HANDING
LOCK CASE COi/ER
Take a catch screw out - Make outside lever in freewheeling function
IMSIDE OF DOOR
� �
LeftH;?c
��!Hand
OUTSIOf OF OOOR
Door hand is detem1ined by door swing when viewed from outside or corridor side of door.
28
Marathon Hardware
29
HOW TO ORDER INFORMATION
1. To order the mortise locks, simply specify your desired models as shown:
� [!] @] 0
L Finish Color: For example -US3 or 605
-US26D or 626
-US32D or 630
Cylinder Type: For example-526 (1-1/8" standard cylinder)
-208 (1-3/8" IC cylinder)
-206NIC (IC cylinder less core)
-NC (No cylinder required)
�------Trim design: For example -LR01 (Rose design wtth Type No. 01 lever)
-LE02 (L Escutcheon design with Type No. 02 lever)
-NE17(N Escutcheon design with Type no. 17 lever)
-HL22 (Push-Pull trim)
�-------- Model Number. For example-M3485 (Entrance lock)
The examples of ordered model numbers:
M3485 -LR01 -206 -US3 (or 605)
M2005 -LE02 -526 -US26D (or 626)
M3420-NE17-NC-US32D (or 630)
M2413-HL22-526-US32D (or 630)
-M2005 (F0S, Classroom lock)
- M3420 (F20, Apartment corridor door lock)
2. Specify door thickness if other than 1-3/4" standard door, a special longer spindle and mounting screws will be provided.
Marathon Hardware
FINISH CLASSIFICATION
The finishes described in this catalog conform to U.S. Standard specifications. Shown here are the most common finishes along with corresponding America B.H.M.A. (Builders Hardware Manufacturers Association) designation. details see American National Standard ANSI/BHMA A 156.18-2006.
U.S. Standard B.H.M.A. Code Finish Description
Designation Number
US3 605 Bright Brass, clear coated
US4 606 Satin Brass, clear coated
US9 611 Bright Bronze, clear coated
US10 612 Satin Bronze, clear coated
US10B 613 Dark Oxidized Satin Bronze, oil rubbed
US15 619 Satin Nickel Plated, clear coated
US26 625 Bright Chromium Plated over nickel
US26D 626 Satin Chromium Plated over nickel
US32 629 Bright Stainless Steel
US32D 630 Satin Stainless Steel
US28 689 Aluminum Painted
US20A 690 Dark Bronze Painted
Note: BHMA Code Number should be different if the base material is changed.
30
Marathon Hardware