meeting planner documentation - ems software
TRANSCRIPT
MEETING PLANNERInstallation, Configuration, and User
Guides
Last Updated: April 24, 2018
EMS Software | emssoftware.com/help | 800.440.3994 | © 2018 EMSSoftware, LLC. AllRightsReserved.
Table of Contents
CHAPTER 1: Introduction to Meeting Planner 1
Contact Customer Support 1
CHAPTER 2: Network Architecture Diagram 2
2
CHAPTER 3: Hardware & Software Requirements 3
Hardware Requirements 3
1-5,000 active users 3
5,000-30,000 active users 4
30,000+ active users 5
Software Prerequisites 6
End-User Machines 6
Application Server 8
Exchange Server 10
Service Accounts 10
Database Server 11
CHAPTER 4: Hardware & Software Requirements Checklist 13
End user machines 13
Application Server 13
Web Server (Roles) 13
MessageQueuing Services 14
Internet Information Services 14
Microsoft .NET Framework 14
Service Accounts 14
Database Server 14
SQL Server 14
CHAPTER 5: Server 2012 Prerequisite Setup 15
Application Server Prerequisite Setup 15
Web Server (Role) 15
MessageQueuing Services 19
Internet Information Services (IIS) 19
Microsoft .NET Framework 21
SupportingMicrosoft References: 22
Database Server Prerequisite Setup 22
SQL Server 22
CHAPTER 6: Server 2008 R2 Prerequisite Setup 25
Application Server Prerequisite Setup 25
Web Server (Roles) 25
MessageQueuing Services 26
Internet Information Services (IIS) 27
Microsoft .NET Framework 28
SupportingMicrosoft References: 29
Database Server Prerequisite Setup 29
SQL Server 29
CHAPTER 7: Application Server Installation 31
CHAPTER 8: Database Server Configuration 35
Identify Database 35
Restore Database 35
Setup SQL Login 37
CHAPTER 9: Back-end Application Configuration and Service Configuration 41
Back-end Application Configuration 41
Server Info 41
Database 41
Email 42
Back-end Service Configuration 42
Meeting Planner Appointment Notifier Service 42
Exchange Impersonation Rights 42
Reference: 43
CHAPTER 10: Installing Meeting Planner 44
Application Server Installation 45
Connect to the SQL Sever Database 47
Active Directory Import 48
Active Directory Configuration 49
Configure Active Directory Settings 49
Map AD Fields 51
Run Services Control Panel 53
CHAPTER 11: Verification 55
Application Logging 55
Administrator Profile Setup 56
Meeting Planner Appointment Notifier (Front-end) 57
CHAPTER 12: Outlook Add-in 59
Generate .msi 59
Automated Deployment 59
Manual Installation 59
CHAPTER 13: Configuration Guide 61
Application Cache Disclaimer 62
CHAPTER 14: Hierarchy Overview and Settings 63
Hierarchy Overview 63
3 Level Hierarchy: 63
Add-in View (3 level hierarchy) 64
Web Scheduler Calendar View (Hierarchy) 64
Hierarchy 65
Example of 3-Level Hierarchy 66
Example of 4-Level Hierarchy 66
Buildings 66
Building Editor 67
Images 68
Locations 69
State 69
Building Group Editor 69
City 70
Campus 70
Search Building 71
CHAPTER 15: Hierarchy - Create a New Room 73
General 73
Room Editor 73
Description 77
Voice/Data 80
Add Voice Lines 80
Add Data Lines 81
Fixed Equipment 81
Setup 82
Owners 84
Custom Fields 86
Billing 87
Exchange 88
CHAPTER 16: Hierarchy - Combination Rooms 89
Combination Room SetupOptions 89
Using Existing Single Room SetupOptions 89
Creating New SetupOptions for Combination Rooms 90
Force Room Setup 91
Setup Buffers 91
Equipment 92
Recurring Reservations 92
Creating Combined Rooms 93
General 93
Combined Rooms 93
Setup 94
Billing 94
CHAPTER 17: Hierarchy - View or Modify 96
Complete Hierarchy 96
View orModify Complete Hierarchy 96
CHAPTER 18: Hierarchy - Equipment Storage 97
Create a New Storage Location 97
General 97
Contact 98
Hours 98
Directions 99
Create a Shared Storage Location 99
Equipment Location 100
View orModify Equipment Storage Location 101
CHAPTER 19: Resources - Room Setup Options 102
RoomOptions 102
Room Setups 102
Create New Room Setups 103
Room SetupGeneral Settings 103
CHAPTER 20: Resources - Equipment Options/Portable Equipment 106
Equipment Types 106
Create New Equipment Type 106
View orModify Equipment Type 107
Equipment General Settings 107
Portable Equipment 110
Equipment list 110
Add New Portable Equipment to Storage Location 110
Equipment Editor 111
General 111
Remove or Modify Equipment Data 112
Take Equipment Out of Service 112
Description 112
Owners 113
CHAPTER 21: Resources – Caterers 114
Caterers 114
Catering Vendors 114
Vendor List 114
Create Internal Catering Vendors 114
Hours 115
Addresses 115
Contacts 116
Serviced Buildings 116
CateringMenu 117
Create External Catering Vendors 118
Hours, Addresses, Contacts, and CateringMenu 119
Serviced Buildings 119
Catering General Settings 119
CHAPTER 22: Resources – Videoconference 122
VideoconferenceGeneral Settings 122
CHAPTER 23: Application - Users & Groups 125
Users & Groups 125
Users 125
Creating a New User 125
Creating a Public/Default User Profile 127
Creating a Submit a Request Profile 128
Modifying a User’s Profile 128
Edit a User’s Profile 128
Deleting a User's Profile 128
Groups 129
Private and Restricted Groups 129
Public Mode User Group 130
Submit a Request User Group 130
Creating a New User Group 130
Individuals 130
Assign an Administrator of the Restricted RoomGroup 131
Client Groups 131
Rooms 131
Equipment 132
Security 132
Edit a User Group 133
Add/Remove an individual from the group: 133
Add/Remove application items from the security tab: 134
Delete a User Group 134
User General Settings 134
CHAPTER 24: Application - Email Templates 135
Restricted Room Request Template 135
Restricted Room Response Template 136
Room SetupWork Request Template 136
Equipment Delivery Work Request Template 137
CateringWork Request Template 137
VideoconferenceWork Request 138
Request Form Template 138
CHAPTER 25: Reservation Attributes 139
Request Form Fields 139
Billing Codes 140
Activity Codes 141
Client Matter 142
Custom Fields 143
CHAPTER 26: Application Code Tables 145
Add/Edit/Delete Activity Codes 145
Add/Edit/Delete Food Item Types 148
Add/Edit/Delete Industry Types 150
Add/Edit Room Custom Fields 152
Add/Edit Room Status 154
Room Status Text 154
Room Status Color 154
CHAPTER 27: Integrations 156
EWS 156
Commscope, MeetingPlace, MeetMeLines, Tandberg, Latitude, Vyopta, BT Engage 157
CHAPTER 28: Core Configuration - Global Settings 158
Global Settings 158
CHAPTER 29: Core Configuration - Web Settings 160
WebSettings 160
Web Theme 164
CHAPTER 30: Core Configuration - Universal Schedules (Room Groups) 168
Create Universal Schedules (Room Groups) 169
CHAPTER 31: Core Configuration - Forms Authentication 170
CHAPTER 32: Core Configuration – Attachments 171
CHAPTER 33: Core Configuration - Outlook Add-in 172
Outlook Add-in 172
Outlook Add-in: Visitors 176
Outlook Add-in: Teleconferencing 176
Clear Meeting Planner Cache 177
CHAPTER 34: Meeting Planner User Guide 178
CHAPTER 35: Quick Reserve/Features 179
Other Features 179
CHAPTER 36: Create A Meeting 181
CreateMeeting in Microsoft Outlook 181
Access and View 182
Room Search Parameters 182
Select Hierarchy Location from ‘Search’ Window 182
Enter the Number of Attendees 183
Select In-Room Equipment 183
Select Work Request 183
View Available Rooms 185
Room Description 186
Setup and VC Tabs 186
Add Setup Using Tab 187
Request a SetupWindow Room ReservationWindow 188
Complete Reservation 190
Delegate Reservations 192
CHAPTER 37: Meeting Conflicts 193
CHAPTER 38: Add Resources 194
AddCatering 194
Internal 194
Internal Catering Order Tracking Number 195
External 196
Add Equipment 197
Add Room 198
CHAPTER 39: Edit Meeting and Resources 199
Edit Meeting 199
Edit Resources 200
Edit Catering 201
Edit Equipment Delivery Location 203
Edit Setup and Videoconferencing 203
CHAPTER 40: Create a Recurring Meeting 206
AddRoom to Single Occurrence of RecurringMeeting Series 206
Add Room to Entire Recurring Series 207
CHAPTER 41: Delete Meeting/Resources 209
DeleteMeeting (and all resource reservations attached) 209
Delete Resources 210
Delete Individual Reserved Resources (E.G., ROOM, CATERING, OR EQUIPMENT) 211
CHAPTER 42: Edit and Delete Recurring Meeting 213
Edit RecurringMeeting 213
Delete Single Occurrence of RecurringMeeting 215
Delete Entire RecurringMeeting Series 216
CHAPTER 43: Quick Reference 217
Introduction 217
CreateMeeting in Microsoft Outlook 217
Access and View 218
Quick Reserve 218
Room Search Parameters 218
Select Hierarchy Location from SearchWindow 219
Enter the Number of Attendees 219
Select In-Room Equipment 219
Select Work Request 220
Make Room Selection 220
Setup and VC Tabs 221
Complete a Reservation 221
Add Resources 221
Add Catering 222
Add Equipment 222
Add Room 223
Create RecurringMeetings 223
Edit Meeting 223
DeleteMeeting and/or Resources 224
CHAPTER 44: Top Meeting Planner Issues (and How to Fix Them) 225
CHAPTER 45: Introduction to Web Scheduler 227
CHAPTER 46: Installing Web Scheduler 228
Compatible with... 228
Prerequisites 228
IIS6 vs IIS7 Developer Note: 228
Upgrade 229
Installation 229
Quick Reference 229
CHAPTER 47: Configure ASP.NET State for Load Balanced Environments 230
Introduction 230
Configuration 231
State Server Setup (Inbound Ports Required: 80 & 42424) 231
Generate a new machine key 231
Update theWeb SchedulerWebweb.config 231
Modify the registry 232
Start the ASP.NET State Service 233
Web Server(s) Setup (Outbound Ports Required: 80 & 42424) 233
Update theWeb SchedulerWebweb.config 233
Validate the configuration 234
CHAPTER 48: Configure Redirect From Old URL 236
Introduction 236
How To: 236
CHAPTER 49: Uninstalling a Self-Packaged Version (v1.6.0.0 - v1.8.2.0) 238
Introduction 238
Procedure 238
Web Scheduler 238
Appointment Notifier Service 239
CHAPTER 50: Exchange Web Services 240
Introduction 240
ExchangeWeb Services (EWS) 240
Impersonation 241
Accessing EWS 242
MeetingPlanner Applications Requiring EWS 243
References 244
CHAPTER 51: Using Web Scheduler 245
CHAPTER 52: Access and View MeetingPlanner Web Scheduler 246
CHAPTER 53: Features 248
Today 248
Select and View RoomGroup 248
View Room Description 249
Spotlight 249
User Availability 249
Icons 250
CHAPTER 54: Create a Meeting 252
Assign Delegate 255
Invite Attendees 256
Add Room 256
Add Room Setup 257
Add Equipment 258
Add Catering 259
Internal 259
External 261
Add Catering Vendor 261
Add Videoconferencing 261
CHAPTER 55: Create Recurring Meetings 263
RecurringMeeting with Conflict 263
Add Room to Single Occurrence of Recurring Series 264
Add Room to Entire Recurring Series 265
CHAPTER 56: Room Groups 266
Create RoomGroups 266
Edit RoomGroup 267
Delete Schedule Group 267
CHAPTER 57: Edit Meeting 269
Edit Meeting 269
Assign Catering Order to a Different Room 272
CHAPTER 58: Delete Meeting 274
CHAPTER 59: Edit Recurring Meeting 275
CHAPTER 60: Delete Single Occurrence of Recurring Meeting 276
CHAPTER 61: Submit Request 277
CHAPTER 62: Use Outlook/Exchange in Conjunction with Web Scheduler 279
CHAPTER 63: Web Scheduler Quick Reference 280
Access and View MeetingPlannerWeb Scheduler 280
Today 281
Select and View RoomGroup 281
Spotlight 281
User Availability 281
CreateMeeting 282
Invite Attendees 283
Assign Delegate 283
Add Room 284
Add Room Setup 284
Add Equipment 284
Add Catering 284
Create RecurringMeetings 285
Edit Meeting 285
DeleteMeeting 286
UseOutlook/Exchange in Conjunction withWeb Scheduler 287
CHAPTER 64: Meeting Planner Floor Planner 288
CHAPTER 65: Prerequisites 289
Internet Browsers (client-side) 289
Application Server 289
Database Server 290
CHAPTER 66: Installation 291
PHP 291
FloorPlanner SetupWizard 291
Add License Key to Database 292
CHAPTER 67: Troubleshooting 294
Unable to View Icons 294
Rooms Viewed as Reserved (when they are available) 294
Unable to View Floor Plan in IE 295
Unable to View Enter Printer or Room Details popup window 295
CHAPTER 68: FloorPlanner Administrator Page 296
AddRooms to the Floor Plan 296
Identify New Room Location 296
Enter Printer or Room Details 298
Add Features to the Floor Plan 299
CHAPTER 69: Modify Rooms 301
Edit a Room 301
Delete a Room 301
CHAPTER 70: Settings 302
Upload Images 302
MapOptions 303
URLs 303
ExchangeWeb Services 303
Forms Authentication 304
Save FloorPlanner Settings 304
CHAPTER 71: Access and View FloorPlanner 305
Room Selection 306
CHAPTER 72: Create Reservation 307
Using Forms Authentication 307
UsingMeetingPlannerTouch 308
CHAPTER 73: FloorPlanner Quick Reference 312
Access and View MeetingPlanner FloorPlanner 312
Room Selection 313
Create Reservation 314
Using Forms Authentication: 314
UsingMeetingPlannerTouch 315
CHAPTER 74: Installing Room Signs 316
CHAPTER 75: Pre-Installation SQL Server 317
Database Server Prerequisites and Requirements 317
Database Server 317
SQL Server 318
Restore Database 320
Required Installation Data 321
CHAPTER 76: Installing Room Signs 323
CHAPTER 77: Complete the Room Sign with Exchange Back-end Connection 324
Access Room Signs Application 324
Setup Administrator Profile 324
View Room Sign Homepage 326
Setup Room Sign Integration with ExchangeWeb Services 327
EWS 327
Connect to Exchange 328
Locations & Room 329
General 329
Exchange 329
CHAPTER 78: Room Signs Configuration 331
Application Cache Disclaimer 331
CHAPTER 79: Customize Room Sign Environment - Administrator 332
Access Room Sign Settings 332
Customize Building Name 333
Add Room Details 333
General 334
Description 335
Add a Building or a Room 335
General 335
Description (room only) 336
Exchange (room only) 336
Room Sign Interface Configuration 337
Global Settings 337
Theme 338
Logo 338
Available Room 338
In Progress Meeting 339
FutureMeetings (user has not checked-in) 339
Reservation Editor 339
Check In/Out 340
Override Global Settings in Identified Rooms 340
Custom Fields 340
CHAPTER 80: Room Signs Quick Reference 343
Room Sign and Software Application 343
Create Reservation 343
Check In 344
Modify a Room Reservation 344
CHAPTER 81: Exchange Sync, Appointment Fields Accessed in Push 346
Add 346
Update 346
CHAPTER 82: Manually Configure Outlook to Connect with Proxy 347
Determine your mailbox server name and proxy server URL 347
Create anMailbox Profile 348
Manually Configure Server Settings 348
Microsoft Exchange Settings 348
Microsoft Exchange Connection Settings 348
Microsoft Exchange Proxy Settings 349
CHAPTER 83: Service Account Requirements & Uses 350
Required Permissions 350
Exchange 350
Application Server 351
Additional Requirements 351
Account Uses 352
Security 352
CHAPTER 84: User (v5.5.0.20-current) 353
Pre-Installation Preparations 353
Installation Instructions 354
Meeting Planner Configuration Tool Entries 355
Exchange Sync set-up entries fromMeeting PlannerWeb 357
Running Exchange Sync Service and Checking the Results 359
Triggering and Checking Push Results 361
Troubleshooting Connection Issues with Exchange 362
CHAPTER 85: API Reservation Fee (XML "Drop") Introduction 364
Background 364
Sample Output 365
CHAPTER 86: API Reservation Fee (XML "Drop") Installation & Configuration 368
Prerequisites 368
Installation 368
General 368
Triggers 369
Actions 369
Conditions & Settings 369
XMLConfiguration 369
FTP Configuration (if needed) 370
CHAPTER 87: Crestron Fusion Digital Signage 371
CHAPTER 88: Installation and Configuration Guide 372
Setup new MeetingPlanner custom field 372
Set Crestron rooms to 'RoomView' mode 372
Get Crestron RoomID's 373
Link the Crestron RoomIDs to the appropriate MeetingPlanner Rooms 373
Download the synchronization application 374
Configure the application / database connections 374
Finalize application configuration 375
8) Establish the application as a service 375
Optional: "Migrate" existing reservations 376
CHAPTER 89: Installation 378
Quick Reference 378
CHAPTER 90: Caution Screen and Warning Triangle 380
Symptom 380
Causes 380
Solution 380
CHAPTER 91: Resource Isolation: Splitting Application Pools 381
Background 381
Implementation 381
CHAPTER 92: Active Directory Diagnostic 383
Background 383
Installation 383
Functionality & Use 384
ExchangeWeb Services (EWS) Diagnostics 385
Background 385
Installation 385
Functionality & Use 385
IIS Warmup Application (v1.0.0.1) 386
Background 386
Installation & Configuration 387
Updates & Notes 388
ResourceMailbox Migration: ExchangeWeb Services 388
Background 388
Setup & Configuration 389
Prerequisites 389
Applications 389
Service Account 389
Installation / Setup 390
MeetingPlanner Configuration 391
Identifying Rooms toMigrate 391
Process 392
Scheduled Reservation Import 393
Background 393
Installation & Configuration 393
Process 394
CHAPTER 93: Exchange Web Services (EWS) Diagnostics 396
Background 396
Installation 396
Functionality & Use 396
CHAPTER 94: IIS Warmup Application (v1.0.0.1) 398
Background 398
Installation & Configuration 398
Updates & Notes 399
CHAPTER 95: Resource Mailbox Migration: Exchange Web Services 400
Background 400
Setup & Configuration 401
Prerequisites 401
Applications 401
Service Account 401
Installation / Setup 401
MeetingPlanner Configuration 402
Identifying Rooms toMigrate 403
Process 404
CHAPTER 96: Scheduled Reservation Import 405
Background 405
Installation & Configuration 405
Process 406
CHAPTER 1: Introductionto Meeting PlannerThese Guides provides an overview of product features and related tech-
nologies. In addition, it contains hardware and software require-
ments/prerequisites, network architectural diagrams, and troubleshooting
information for common situations.
CONTACT CUSTOMER SUPPORTOption 1 (Recommended): Search the Knowledge Base available in the
EMS Customer Portal.
Option 2: Submit a Case directly via the EMS Customer Portal.
Option 3: Email [email protected].
Option 4 (Recommended for critical issues only): Phone (800) 288-4565.
IMPORTANT: If you do not have a customer login, register here.
EMS Software © 2018 / V44.1 / Page 1
CHAPTER 1: Introduction to Meeting Planner
CHAPTER 2: Network Archi-tecture Diagram
EMS Software © 2018 / V44.1 / Page 2
CHAPTER 2: Network Architecture Diagram
CHAPTER 3: Hardware& Software Requirements
Hardware and Software requirements are based on the number of Meeting Plan-
ner active users. For additional hardware requirement information or recom-
mendations, please contact the EmergingSoft support team.
HARDWARE REQUIREMENTS
1-5,000 ACTIVE USERS
HARDWARE APPLICATION SERVER SPEC
Processor Cores 2
RAM (per core) 2 GB
Hard Drive (free space) 2 GB
EMS Software © 2018 / V44.1 / Page 3
CHAPTER 3: Hardware & Software Requirements
HARDWARE DATABASE SERVER SPEC
Processor Cores 2
RAM (per core) 2 GB
Hard Drive (free space) 6 GB
5,000-30,000 ACTIVE USERS
HARDWARE APPLICATION SERVER SPEC
Processor Cores 4
RAM (per core) 4 GB
EMS Software © 2018 / V44.1 / Page 4
CHAPTER 3: Hardware & Software Requirements
HARDWARE APPLICATION SERVER SPEC
Hard Drive (free space) 4 GB
HARDWARE DATABASE SERVER SPEC
Processor Cores 4
RAM (per core) 4 GB
Hard Drive (free space) 10 GB
30,000+ ACTIVE USERS
HARDWARE APPLICATION SERVER SPEC
EMS Software © 2018 / V44.1 / Page 5
CHAPTER 3: Hardware & Software Requirements
HARDWARE APPLICATION SERVER SPEC
Processor Cores 4
RAM (per core) 4 GB
Hard Drive (free space) 6 GB
SOFTWARE PREREQUISITES
END-USER MACHINES
APPLICATION SUPPORT
Windows OS XP, 7, 8, 8.1
Outlook (optional)* 2010, 2013, 2016
Microsoft .NET Framework 4.6*
EMS Software © 2018 / V44.1 / Page 6
CHAPTER 3: Hardware & Software Requirements
APPLICATION SUPPORT
Browser Options: Internet Explorer IE8 or above (Recommended: IE11
or above)
Chrome Chrome 5 or above
Firefox Firefox 3 or above
Safari Safari 4 or above
SQL Server 2008R2 or newer
NOTE: Outlook is required if using the MeetingPlanner Add-in.
EMS Software © 2018 / V44.1 / Page 7
CHAPTER 3: Hardware & Software Requirements
*Microsoft .NET Framework 4.6 is available via download from http://www.-
microsoft.com/en-us/download/details.aspx?id=48130
APPLICATION SERVER
IMPORTANT: The application and database servers can be, but do not have
to be, the same.
PREREQUISITE DETAILS
Operating System Windows Server 2008 and newer
Web Server (Role) Windows Authentication
ASP.Net 4.5
IIS6 Metabase Compatibility
EMS Software © 2018 / V44.1 / Page 8
CHAPTER 3: Hardware & Software Requirements
PREREQUISITE DETAILS
Message Queuing Services Message Queuing Server
Directory Service Integration
HTTP Support
Internet Information Services IIS7 or above
URL Rewrite Module*
Default Web Site**
Microsoft .NET Framework v2.0
v4.0
EMS Software © 2018 / V44.1 / Page 9
CHAPTER 3: Hardware & Software Requirements
EXCHANGE SERVER
EXCHANGE SERVER REQUIREMENTS DETAILS
Exchange Server 2010, 2013, O365
SERVICE ACCOUNTS
SERVICE REQUIRING ACCOUNT REQUIRED PERMISSIONS
Appointment Notifier (EWS) Exchange Impersonation*
NOTES: Please see the following link for more information on exchange
impersonations: http://msdn.microsoft.com/enus/library/office/bb204095(v=e-
exchg.140).aspx.
Verify the URL Rewrite Module in the IIS Manager. For information on
installing the module, see link: http://www.iis.net/downloads/microsoft/url-
rewrite.
NOTE: -.1 or .0 error message indicates the URL Rewrite Module is missing.
EMS Software © 2018 / V44.1 / Page 10
CHAPTER 3: Hardware & Software Requirements
**Must meet requirement for installation.
NOTE: The ‘Default Web Site’ values automatically default as shown below.
After installation, the values can be changed.
TCP Port: 80
IP Address: (All Unassigned)
Host Header Value: <none>
DATABASE SERVER
IMPORTANT: The application and database servers can be, but do not have
to be, the same.
PREREQUISITE DETAILS
Sql SQL Server 2008 R2 and newer
EMS Software © 2018 / V44.1 / Page 11
CHAPTER 3: Hardware & Software Requirements
PREREQUISITE DETAILS
Management Studio
Mixed Authentication Mode Enabled**
EMS Software © 2018 / V44.1 / Page 12
CHAPTER 3: Hardware & Software Requirements
CHAPTER 4: Hardware& Software Requirements Check-list
END USER MACHINES
Supported Windows OS
Supported Outlook
Supported Browser
Microsoft .NET Framework 4.6
APPLICATION SERVERSupported OS
WEB SERVER (ROLES)
Windows Authentication
ASP.NET
IIS 6 Metabase Compatibility
EMS Software © 2018 / V44.1 / Page 13
CHAPTER 4: Hardware & Software Requirements Checklist
MESSAGE QUEUING SERVICES
Message Queuing Server
Directory Service Integration
HTTP Support
INTERNET INFORMATION SERVICES
IIS 7 or above
URL Rewrite Module installed
Default Website
MICROSOFT .NET FRAMEWORK
V2.0 installed
V4.0 installed & registered
SERVICE ACCOUNTS
Exchange Impersonation Account for Appointment Notifier Service
DATABASE SERVERSQL SERVER
2008 R2 or newer
Management Studio
Enabled Mixed Authentication Mode
EMS Software © 2018 / V44.1 / Page 14
CHAPTER 4: Hardware & Software Requirements Checklist
CHAPTER 5: Server 2012 Pre-requisite Setup
APPLICATION SERVER PREREQUISITE SETUP
WEB SERVER (ROLE)
1. Go to Start > Control Panel > Programs and Features.
2. Select Turn Windows Features on or off.
3. Select Add roles and features from the ‘Server Manager/Dashboard’ window.
EMS Software © 2018 / V44.1 / Page 15
CHAPTER 5: Server 2012 Prerequisite Setup
4. Select Installation Type, and Role-based or feature-based installation from the
'Add Roles and Features Wizard' window, and Next.
EMS Software © 2018 / V44.1 / Page 16
CHAPTER 5: Server 2012 Prerequisite Setup
5. Select the server that MeetingPlanner will be installed on, and Next.
EMS Software © 2018 / V44.1 / Page 17
CHAPTER 5: Server 2012 Prerequisite Setup
6. From Server Roles of the ‘Add Roles and Features Wizard’ window, make sure
roles i-v indicated below are enabled and installed, then select Next. Use the scroll
bar on the right side of the ‘Add Roles and Features Wizard’ window to navigate.
Use the file path in boldface to locate the required roles.
a. i. Windows Authentication (Web Server (IIS)>Web Server>Security>Windows
Authentication-Installed).
b. ii. ASP.NET 4.5 (Web Server (IIS)>Web Server>Application Devel-
opment>ASP.NET 4.5 Installed).
EMS Software © 2018 / V44.1 / Page 18
CHAPTER 5: Server 2012 Prerequisite Setup
c. iii. IIS 6 Metabase Compatibility (Web Server (IIS)>Web Server>Management
Tools>IIS 6 Management Compatibility>IIS 6 Metabase Compatibility-Installed).
d. iv. NET Framework 4.5 (Application Server>.Net Framework 4.5-Installed).
e. v. Web Server (IIS) Support(Application Server>Web Server IIS Support-Installed).
MESSAGEQUEUING SERVICES
(Message Queuing>Message Queuing Services>Message Queuing Server-
/Directory Service Integration/HTTP Support):
7. Select Features from the ‘Add Roles and Features Wizard’ window and verify the
following prerequisites are selected:
Message Queuing Server
Directory Service Integration
HTTP Support
8. Enable to add prerequisites, and select Next. If the prerequisites are already
enabled, Cancel to exit.
9. From Confirmation, select Install.
10. From Results, view Feature Installation, and Close.
11. Restart the server if required.
INTERNET INFORMATION SERVICES (IIS)
(SQL Server Management>Default Web Site>URL Rewrite)
EMS Software © 2018 / V44.1 / Page 19
CHAPTER 5: Server 2012 Prerequisite Setup
12. Verify the URL Rewrite Module in the ‘IIS Manager’ Window.
NOTE: For information on installing the module, see link: http://www.iis.net/-
downloads/microsoft/url-rewrite.
13. Verify the Default Web Site bindings. The ‘Default Web Site’ bindings auto-
matically default as shown below. After installation, the values can be changed.
TCP Port: 80
IP Address: (All Unassigned)
EMS Software © 2018 / V44.1 / Page 20
CHAPTER 5: Server 2012 Prerequisite Setup
Host Header Value: <none>
MICROSOFT .NET FRAMEWORK
1. Select Start > Run.
2. Enter ‘regedit’ and OK.
3. Navigate to the NDP node in the ‘Registry Editor’: (HKEY_LOCAL_MACHINE
>Software >Wow6432Node>Microsoft >NET Framework Setup> NDP).
4. Select v2.0.5.727.
5. Verify .NET 2.0 is installed.
IMPORTANT: If the “Install” key does not equal “1,” please install .NET 2.0.
6. Verify .NET 4.0 is installed. (HKEY_LOCAL_MACHINE >Software
>Wow6432Node>Microsoft >NET Framework Setup> NDP>v4.0).
EMS Software © 2018 / V44.1 / Page 21
CHAPTER 5: Server 2012 Prerequisite Setup
7. Select Client.
IMPORTANT: If the “Install” key does not equal “1,” please install .NET 4.0.
SUPPORTINGMICROSOFT REFERENCES:
http://msdn.microsoft.com/en-us/kb/kbarticle.aspx?id=318785
http://msdn.microsoft.com/en-us/library/hh925568.aspx
DATABASE SERVER PREREQUISITE SETUP
SQL SERVER
1. Enable Mixed Authentication Mode:
a. Open ‘Microsoft SQL Server Management Studio’ and Connect.
EMS Software © 2018 / V44.1 / Page 22
CHAPTER 5: Server 2012 Prerequisite Setup
b. Right click on the server name in the ‘Object Explorer’ window.
c. Select Properties >Security.
d. Select SQL Server and Windows Authentication Mode and OK.
EMS Software © 2018 / V44.1 / Page 23
CHAPTER 5: Server 2012 Prerequisite Setup
EMS Software © 2018 / V44.1 / Page 24
CHAPTER 5: Server 2012 Prerequisite Setup
CHAPTER 6: Server 2008 R2 Pre-requisite Setup
APPLICATION SERVER PREREQUISITE SETUP
WEB SERVER (ROLES)
1. Go to Start > Control Panel > Programs > Programs and Features.
2. Select Turn Windows Features on or off.
3. Expand Roles from the ‘Server Manager’ window.
4. Select Web Server (IIS).
EMS Software © 2018 / V44.1 / Page 25
CHAPTER 6: Server 2008 R2 Prerequisite Setup
5. Verify the roles listed below are installed. Add the Role Services, if the services
are NOT installed, by selecting Add Features from the top right corner of the ‘Man-
ager Window.’
Windows Authentication
(Web Server>Security)
ASP.Net
(Web Server>Application Development)
IIS 6 Metabase Compatibility (Management Tools>IIS 6 Management Compatibility)
MESSAGEQUEUING SERVICES
(Features>Message Queuing> Message Queuing Services> Message
Queuing Server/Directory Service Integration/ HTTP Support)
6. Select Features from the ‘Server Manger” window, and verify the services listed
below are installed.
Message Queuing Server
(Message Queuing>Message Queuing Services)
EMS Software © 2018 / V44.1 / Page 26
CHAPTER 6: Server 2008 R2 Prerequisite Setup
Directory Service Integration
(Message Queuing>Message Queuing Services)
HTTP Support
(Message Queuing>Message Queuing Services)
7. Add the Queuing Services by selecting Add Features from the top right corner of
the ‘Manager Window.’
8. From Confirmation, enable Restart the destination server automatically required.
9. From Confirmation, select Install.
10. From Results, view Feature Installation, and Close.
INTERNET INFORMATION SERVICES (IIS)
(Roles>Web Server (IIS)>select Internet Information Services (IIS) Manager
11. Expand Roles on the ‘Server Manager’ window’.
12. Expand Web Server (IIS).
13. Select Internet Information Services (IIS) Manager.
14. Expand the server that MeetingPlanner will be installed on.
15. Expand Sites.
16. Select Default Web Sites.
17. Verify the URL Rewrite Module is installed in the ‘IIS Manager’ window.
EMS Software © 2018 / V44.1 / Page 27
CHAPTER 6: Server 2008 R2 Prerequisite Setup
NOTE: For information on installing the module, see link: http://www.iis.net/-
downloads/microsoft/url-rewrite.
18. Verify the Default Web Site bindings. The ‘Default Web Site’ bindings auto-
matically default as shown below. After installation, the values can be changed.
TCP Port: 80
IP Address: (All Unassigned)
Host Header Value: <none>
MICROSOFT .NET FRAMEWORK
19. Select Start > Run.
20. Enter ‘regedit’ and Ok.
21. Navigate to the NDP node in the ‘Registry Editor’: (HKEY_LOCAL_MACHINE
>Software >Wow6432Node>Microsoft >NET Framework Setup> NDP).
22. Select 2.0.5.727.
23. Verify .NET 2.0 is installed.
IMPORTANT: If the “Install” key does not equal “1,” please install .NET 2.0.
24. Verify .NET 4.0 is installed.
EMS Software © 2018 / V44.1 / Page 28
CHAPTER 6: Server 2008 R2 Prerequisite Setup
(HKEY_LOCAL_MACHINE >Software >Wow6432Node>Microsoft >NET
Framework Setup> NDP>v4.0)
25. Select Client.
IMPORTANT: If the “Install” key does not equal “1,” please install .NET 4.0.
SUPPORTINGMICROSOFT REFERENCES:
http://msdn.microsoft.com/en-us/kb/kbarticle.aspx?id=318785
http://msdn.microsoft.com/en-us/library/hh925568.aspx
DATABASE SERVER PREREQUISITE SETUP
SQL SERVER
1. Enable Mixed Authentication Mode.
a. Open ‘Microsoft SQL Server Management Studio’ and Connect.
EMS Software © 2018 / V44.1 / Page 29
CHAPTER 6: Server 2008 R2 Prerequisite Setup
b. Right click on the server name in the ‘Object Explorer’ window.
c. Select Properties >Security.
d. Select SQL Server and Windows Authentication Mode and OK.
EMS Software © 2018 / V44.1 / Page 30
CHAPTER 6: Server 2008 R2 Prerequisite Setup
CHAPTER 7: Application ServerInstallation1. Double-click on the ‘MeetingPlanner.msi’ file to execute. If any issues occur,
please run the msi using the commandline:
a. Start > (right-click) cmd.exe > Run as Administrator.
b. Change directory to the folder containing the MeetingPlanner.msi file:
C:\> cd Users\Administrator\Desktop
c. Execute the msi using the following command:
C:\Users\Administrator\Desktop> msiexec /i MeetingPlanner.msi /L*V “mp.log”
NOTE: If the wizard does not launch, or any issues occur throughout the
upcoming steps, please provide the mp.log file to the Emergingsoft support
team for review.
2. The installation wizard should now be open. Select Next to proceed to the EULA.
3. Read the EULA. Once accepted, Select Next.
EMS Software © 2018 / V44.1 / Page 31
CHAPTER 7: Application Server Installation
4. Select Custom to proceed to choose the components that are required.
5. Select the options to install.
EMS Software © 2018 / V44.1 / Page 32
CHAPTER 7: Application Server Installation
Meeting Planner and sub-sections: (Always Install)
Web Scheduler: (Always Install)
FloorPlanner: Floor plan navigation software (Optional*)
Room Wizard: Integration with Steelcase RoomWizard devices (Optional*)
Mail Spooler: (Always Install)
(Services) Active Directory: Integration with Active Directory (Typically Install)
(Services) Exchange Sync: Integration with Exchange Resource Mailboxes
(Optional)
(Service Caller) Honeywell Services: Integration with Honeywell EBI (Optional)
EMS Software © 2018 / V44.1 / Page 33
CHAPTER 7: Application Server Installation
*Additional charges apply
6. Highlight the “MeetingPlanner” option to change the installation directory, if neces-
sary
7. Select Next.
8. Select Install.
9. Enable Launch Configuration Tool when setup exits and select Finish.
EMS Software © 2018 / V44.1 / Page 34
CHAPTER 7: Application Server Installation
CHAPTER 8: Database ServerConfiguration
IDENTIFY DATABASE
After installing the Meeting Planner software, two .bak files will be placed on the
application server in the <Install-
ationDirectory*>\MeetingPlannerConfiguration\Database folder.
MeetingPlanner_Demo.bak: The demo database has preconfigured rooms, equip-
ment, and other assets. This is typically the recommended database to use for trials,
so that Meeting Planner will be up and running quickly.
*Typically: C:\Program Files (x86)\Emergingsoft
RESTORE DATABASE
1. Open Microsoft SQL Management Studio.
2. Connect to the server that will hold the Meeting Planner database.
3. Right-click on Database (Object Explorer, left pane) > Restore Database.
EMS Software © 2018 / V44.1 / Page 35
CHAPTER 8: Database Server Configuration
4. Set the name for the new database (“To database” field).
5. Select From device and click on the three dots to launch the folder browser.
6. Select Add, and the .bak you wish to restore.
7. Select OK.
8. Select Restore.
EMS Software © 2018 / V44.1 / Page 36
CHAPTER 8: Database Server Configuration
9. Select OK.
SETUP SQL LOGIN
1. Go to Security (Object Explorer, left pane) > (right-click) Logins > New Login…
EMS Software © 2018 / V44.1 / Page 37
CHAPTER 8: Database Server Configuration
2. Complete the General page.
Specify a Login Name
Select “SQL Server Authentication”
Specify an account password
Uncheck “Enforce password expiration”
3. Go to the User Mapping page (left pane).
EMS Software © 2018 / V44.1 / Page 38
CHAPTER 8: Database Server Configuration
4. Enable the “Map” box next to Meeting Planner and allocate db owner permissions.
EMS Software © 2018 / V44.1 / Page 39
CHAPTER 8: Database Server Configuration
5. Select OK.
EMS Software © 2018 / V44.1 / Page 40
CHAPTER 8: Database Server Configuration
CHAPTER 9: Back-end Applic-ation Configuration and ServiceConfiguration
BACK-END APPLICATION CONFIGURATION
Please open the Meeting Planner Configuration Tool on the server. Once open,
proceed through the tabs in the order specified below.
SERVER INFO
MeetingPlanner Server: Server name for the Meeting Planner application server
(FQDN not required). This will be used when creating the client installation package,
so that the Outlook Add-in will know where to connect to the Meeting Planner web ser-
vices.
DATABASE
Server: SQL server name (where Meeting Planner is hosted)
Database: Meeting Planner database name
Login: Meeting Planner SQL service account
Password: Meeting Planner SQL service account password
EMS Software © 2018 / V44.1 / Page 41
CHAPTER 9: Back-end Application Configuration and Service Configuration
SMTP Server: FQDN for the SMTP server that Meeting Planner will use to send
emails
Meeting Planner From Address: Any email sent from MeetingPlanner will be sent
from this address (does not need to be a part of Exchange or AD)
Email To: Specify an internal email address if you wish to send a test email.
BACK-END SERVICE CONFIGURATION
MEETING PLANNER APPOINTMENT NOTIFIER SERVICE
1. Open Administrative Tools > Services on the application server.
2. Go to the “MeetingPlanner Appointment Notifier” service.
3. Right-click on the service and go to the Log On tab.
4. Enter the service account credentials for the service. This account should have
been configured with Exchange Impersonation rights.
EXCHANGE IMPERSONATION RIGHTS
Exchange Impersonation enables an application to impersonate a given user
account. These rights are different than delegate, Send As, and Full Access
rights. Impersonation rights are accessible only through code and enable the
application to perform operations by using the permissions that are associated
EMS Software © 2018 / V44.1 / Page 42
CHAPTER 9: Back-end Application Configuration and Service Configuration
with the impersonated account, instead of the permissions that are associated
with the application’s account.
REFERENCE:
http://msdn.microsoft.com/en-us/lib-
rary/office/bb204095%28v=exchg.140%29.aspx
EMS Software © 2018 / V44.1 / Page 43
CHAPTER 9: Back-end Application Configuration and Service Configuration
CHAPTER 10: Installing MeetingPlanner
IMPORTANT: To install MeetingPlanner, the database backup file must be
restored.
The MeetingPlanner Installer must have the following data from the pre-
installation:
Database name (e.g., MeetingPlanner)
MeetingPlanner login and password credentials
EWS URL
EWS Service Account
SMTP address for each room utilized in MeetingPlanner
EMS Software © 2018 / V44.1 / Page 44
CHAPTER 10: Installing Meeting Planner
APPLICATION SERVER INSTALLATION1. Download the MeetingPlanner.msi to the server from the support portal.
2. Double click on the MeetingPlanner.msi to execute.
3. Select Next to proceed to the EULA once the installation wizard opens.
4. Read the EULA and check to accept the terms in the license agreement.
5. Select Next.
6. Select Custom to proceed to choose the components that are required.
EMS Software © 2018 / V44.1 / Page 45
CHAPTER 10: Installing Meeting Planner
7. Select Next.
8. Select Install.
9. Enable Launch Configuration Tool when setup exits and select Finish.
EMS Software © 2018 / V44.1 / Page 46
CHAPTER 10: Installing Meeting Planner
CONNECT TO THE SQL SEVER DATABASE1. Go to your sever desktop.
2. Select the Configuration Tool.
3. Select the Database tab.
4. Enter the SQL Server name (e.g., Localhost).
5. Enter the Database name: (e.g., MeetingPlanner).
6. Enter your login and password.
7. Copy and paste the license key provided.
8. Select Update.
9. Select Save.
EMS Software © 2018 / V44.1 / Page 47
CHAPTER 10: Installing Meeting Planner
10. Select Test Connection.
ACTIVE DIRECTORY IMPORT
The Active Directory Sync service acts to create and maintain Meet-
ingPlanner profiles for users in Active Directory. This is an optional service
(users can be created and maintained manually) that is available, free of
charge, with any MeetingPlanner installation.
IMPORTANT: Prior to starting the service, the MeetingPlanner Installer
must go to Application>Users&Groups>User General Settings and update
EMS Software © 2018 / V44.1 / Page 48
CHAPTER 10: Installing Meeting Planner
the Default Time Zone, as this will be the timezone set for all users impor-
ted through this service.
ACTIVE DIRECTORY CONFIGURATION
1. Open the MeetingPlanner Configuration Tool from the application server.
2. Navigate to: Start > All Programs > EmergingSoft > MeetingPlanner Con-
figuration Tool > Active Directory Import.
3. Select Configure Settings.
CONFIGURE ACTIVE DIRECTORY SETTINGS1. Enter the LDAP path (Distinguished Name) of the CN or OU you would like mon-
itored by the service.
EMS Software © 2018 / V44.1 / Page 49
CHAPTER 10: Installing Meeting Planner
NOTE: If you are having trouble determining the path, consider making use
of the Microsoft ADSI Edit tool.
2. Select Include Subfolders (if applicable).
3. Select Add.
NOTE: Multiple paths can be entered.
4. Set the Service Settings:
Service will run daily at: The service runs once daily; this is where the run time is
set.
Default Group: All users are required to be part of a MeetingPlanner group. Once
users are created, as members of the Normal Users group in this case, admin-
istrators will be able to add them to different groups to provide additional Meet-
ingPlanner privileges if necessary.
Default Building: Users can be automatically assigned a default building. Other
options include 1) connecting a field in AD to map default buildings to user profiles
EMS Software © 2018 / V44.1 / Page 50
CHAPTER 10: Installing Meeting Planner
(if that is currently done in your AD), 2) having an administrator set default buildings
for users, or 3) by the users themselves by visiting MeetingPlanner > Preferences.
5. Select Save.
MAP AD FIELDS1. Select Map AD Fields.
EMS Software © 2018 / V44.1 / Page 51
CHAPTER 10: Installing Meeting Planner
2. View the AD Mapping page. Columns on the left represent MeetingPlanner pro-
file attributes. Columns on the right represent Active Directory user properties.
3. Drag AD fields into the textboxes on the left to associate the AD fields with Meet-
ingPlanner fields as described in the table below.
IMPORTANT: If the Active Directory properties do not populate in the
columns on the right, please go back to the previous step and revise the
LDAP path. This means that no user accounts were found.
FIELDS DESCRIPTION
Username Windows login name - typically 'samaccountname' (Mandatory)
Email Email address - typically 'mail' (Mandatory)
EMS Software © 2018 / V44.1 / Page 52
CHAPTER 10: Installing Meeting Planner
FIELDS DESCRIPTION
Display Name Display name in MP - typically 'displayname' (Optional)
First Name First name - typically 'givenname' (Optional)
Last Name Last name - typically 'sn' (Optional)
Time Zone Default timezone (three letter code, e.g. "CST") - typically not mapped
(Optional)
Building Name Default building, which would correspond to the Building EID field in
MeetingPlanner - typically not mapped (Optional)
4. Select OK.
RUN SERVICES CONTROL PANEL
1. Select Run Services Control Panel.
2. View Services window.
EMS Software © 2018 / V44.1 / Page 53
CHAPTER 10: Installing Meeting Planner
3. Restart the MeetingPlanner Active Directory Sync service. The service must be
restarted if modification are made to field mapping or default settings of the AD
Sync service.
EMS Software © 2018 / V44.1 / Page 54
CHAPTER 10: Installing Meeting Planner
CHAPTER 11: Verification
APPLICATION LOGGING
1. Navigate to the <InstallationDirectory>\LoggingConfiguration folder.
2. Locate and note the file paths for the following files:
LoggingConfigWeb.xml
LoggingConfigWebService.xml
3. Navigate to the <InstallationDirectory>\MeetingPlannerWeb folder.
4. Open the “web.config” file in Notepad.
5. Update the “LogConfigFile” value (if necessary) to point to the location of the “Log-
gingConfigWeb.xml” file.
<configuration>
<appSettings>
…
<add key=”LogConfigFile” value-
e=”<path>\LoggingConfigWeb.xml”
EMS Software © 2018 / V44.1 / Page 55
CHAPTER 11: Verification
…
</appSettings>
</configuration>
6. Save and close.
7. Navigate to the <InstallationDirectory>\MeetingPlannerWS folder.
8. Open the “web.config” file in Notepad.
9. Update the “LogConfigFile” value (if necessary) to point to the location of the “Log-
gingConfigWebService.xml” file.
10. Save and close.
ADMINISTRATOR PROFILE SETUP
1. Open a browser from a machine other than the server.
2. Go to http://<app_server>/suite (the first time you open the MeetingPlanner Suite
you must enter a user profile and attach administrative rights in order to access the
application).
3. Select New User from the bottom right corner of the page and complete the basic
user information to create a profile (using your Windows credentials).
Login: Windows logon name
Email: Email address
EMS Software © 2018 / V44.1 / Page 56
CHAPTER 11: Verification
Display Name: Desired display name (this is not checked against AD)
First Name: First name (this is not checked against AD)
Last Name: Last name (this is not checked against AD)
4. Add the user to the System Administrator group by clicking on the ‘X’ two times
until the Usericon is viewed.
5. Select Save.
IMPORTANT: Once the user profile is created, go to http://<app server>/suite
to access the MeetingPlanner application. Make modifications using the
Menu icon and dropdown menu from the top right corner of the Web Sched-
uler calendar. Go to Application>Users & Groups > Users>New User, if
needed, to manually create any additional users.
MEETING PLANNER APPOINTMENT NOTIFIER
(FRONT-END)
1. Open a browser from a machine other than the server.
2. Go to http://<app_server>/suite (if you are prompted for credentials, please provide
your Windows credentials
3. Select the Menu navigation icon and dropdown menu from the top-right corner of
the Web Scheduler calendar.
EMS Software © 2018 / V44.1 / Page 57
CHAPTER 11: Verification
4. Go to Application>Integrations>EWS.
5. Enter the EWS Url and other EWS settings as required.
6. Return to the application server and restart the MeetingPlanner Appointment Noti-
fier service.
EMS Software © 2018 / V44.1 / Page 58
CHAPTER 11: Verification
CHAPTER 12: Outlook Add-inGENERATE .MSI
1. Open the MeetingPlanner Configuration Tool (application server).
2. Verify that the Server Info tab is completed correctly (should not be “localhost”).
3. Click “Make a Client Installation”.
4. Select the location for the file to be placed and click OK.
5. A dialog will appear indicating that the creation is complete.
AUTOMATED DEPLOYMENT
The “MeetingPlanner for Outlook.msi” file that is generated is a fully-compliant
Microsoft msi file and can be pushed by any standard deployment software.
Please see the following article for information regarding silent installation and
other flags that can be used: http://msdn.microsoft.com/en-us/library/aa367988
(v=vs.85).aspx .
MANUAL INSTALLATION
1. Go to a client machine to begin the installation.
2. Close all Outlook windows.
3. Run the “MeetingPlanner for Outlook.msi” file.
4. Walk through the installation wizard.
EMS Software © 2018 / V44.1 / Page 59
CHAPTER 12: Outlook Add-in
5. Open Outlook.
6. Navigate to the Calendar page to see the Add-in displayed in the ribbon. No fur-
ther configuration or setup is required for use.
EMS Software © 2018 / V44.1 / Page 60
CHAPTER 12: Outlook Add-in
CHAPTER 13: ConfigurationGuideThe Meeting Planner (MP) Configuration Guide includes UI setting information
for both the Add-in andWeb Scheduler applications. All settings are accessed
via the Web Scheduler: http://yourserver/suite. Use the icon and dropdown
menu from the top right corner of the Web Scheduler homepage calendar to
access the settings and customize the MP environment to fit the needs of your
organization.
Upon installation, MP defaults to the settings most commonly used. We recom-
mend that you begin with the basic default settings and enable additional set-
tings, if deemed necessary, as you become more familiar with the software.
Note: Administration users with access (security permission) will be able to
change the MP settings and make configuration changes ONLY. End users
will not have configuration setting permissions. Although, if given access, end
users can make a few changes to their desktop ONLY using the preferences
setting in the Add-in application. Please see the Add-in User Guide for instruc-
tion on preference settings.
EMS Software © 2018 / V44.1 / Page 61
CHAPTER 13: Configuration Guide
APPLICATION CACHE DISCLAIMER
Some configuration changes in the Add-in require a user to “clear the cache” in
order for setting changes to take immediate effect. Please see Clear Meeting
Planner Cache. TheWeb Scheduler setting changes are immediate and require
no caching.
EMS Software © 2018 / V44.1 / Page 62
CHAPTER 13: Configuration Guide
CHAPTER 14: Hierarchy Over-view and Settings
HIERARCHYOVERVIEW
Typically, there are three levels that makeup the MP location hierarchy: Organ-
izations can create a four level hierarchy by giving the building and campus dif-
ferent names.
3 LEVEL HIERARCHY:
1. State (level 1)
2. City (level 2)
3. Building/Campus (level 3 and 4) and Rooms
EMS Software © 2018 / V44.1 / Page 63
CHAPTER 14: Hierarchy Overview and Settings
ADD-IN VIEW (3 LEVEL HIERARCHY)
WEB SCHEDULER CALENDAR VIEW (HIERARCHY)
From theWeb Scheduler, the hierarchy is hidden (in that it is not visible from the
calendar).
EMS Software © 2018 / V44.1 / Page 64
CHAPTER 14: Hierarchy Overview and Settings
HIERARCHY
A Room and Equipment template (to include all levels of the hierarchy and fixed
room equipment) is recommended for initial import. Thereafter, use the instruc-
tions provided below to make changes to the hierarchy.
Note: The hierarchy will not be visible from either the Add-in or Web Sched-
uler applications until buildings, locations (levels 1-3 or 1-4), and rooms have
been created.
EMS Software © 2018 / V44.1 / Page 65
CHAPTER 14: Hierarchy Overview and Settings
EXAMPLE OF 3-LEVEL HIERARCHY
EXAMPLE OF 4-LEVEL HIERARCHY
BUILDINGS
(Hierarchy > Locations&Rooms > +Building > General)
EMS Software © 2018 / V44.1 / Page 66
CHAPTER 14: Hierarchy Overview and Settings
BUILDING EDITOR
The first step to creating the hierarchy is to name the building (level 3 and/or 4
depending on if you are creating a 3 or 4 level hierarchy). The building level will
house an identified group of rooms from which a user will search.
The ‘building’ level of the hierarchy does not have to be an actual building. If a
floor, etc. makes more sense, name the level that instead.
1. Enter the Building Name.
2. Select the Country from the dropdown.
3. Enter the building Address, City, State, Zip.
4. Enter the building Description (optional).
5. Enter Floor Name (alpha/ie. main), Physical Level (numeric/ie. 1), and Add.
6. Select Save.
Note: The building name, description, and address are seen in the Add-in
application when a user right clicks on a building from the reservation page
and selects ‘View Details’ from the dropdown.
EMS Software © 2018 / V44.1 / Page 67
CHAPTER 14: Hierarchy Overview and Settings
IMAGES
(Hierarchy > Locations&Rooms > +Building > Images)
1. Use the arrow and make a selection from the Image Type dropdown field, or
Browse... to upload an image. Images should be approximately 300 x 200 px.
Note: The building image is seen in the Add-in application when a user right
clicks on a building from the reservation page and selects ‘View Details’ from
the dropdown.
2. Select Add. View Image if you would like to preview the image just uploaded.
3. Select Save.
EMS Software © 2018 / V44.1 / Page 68
CHAPTER 14: Hierarchy Overview and Settings
LOCATIONS
Once the building level is created, name the upper hierarchy location levels:
State, City, and Building/Campus.
The levels have been named State (level 1), City (level 2) and Campus/Building
(level 3 and 4) but do not have to be an actual State, City or Campus/Building.
Name the levels however deemed appropriate for your organization.
STATE
(Hierarchy > Locations&Rooms > + Location > State)
BUILDING GROUP EDITOR
1. Select State (level 1) from the Hierarchy Level dropdown.
2. Enter the name (e.g. State) of the top level of the hierarchy in the Hierarchy Name
field.
EMS Software © 2018 / V44.1 / Page 69
CHAPTER 14: Hierarchy Overview and Settings
3. Select Save.
CITY
(Hierarchy > Locations&Rooms > + Location > City)
1. Select City (level 2) from the Hierarchy Level dropdown.
2. Select the associated top level (level 1) from Parent (e.g., State created above)
field dropdown.
3. Enter the name of the second level of the he.grarchy (ie. City) in the Hierarchy
Name field dropdown.
4. Select Save.
CAMPUS
(Hierarchy > Locations&Rooms >+Location > Campus)
EMS Software © 2018 / V44.1 / Page 70
CHAPTER 14: Hierarchy Overview and Settings
1. Select Campus from the Hierarchy Level dropdown.
2. Select the associated level 2 (ie. City created above) from Parent field dropdown.
3. Enter the building name (level 3 of the hierarchy) in the Hierarchy Name field if cre-
ating a 3 level hierarchy.
Make sure to enter the building name exactly the same as when you created the
building.
Important: If creating a 4 level hierarchy, the campus must have a different
name than the building.
SEARCH BUILDING
4. Enter the Building Name. The building name must be entered exactly the same as
it was created.
5. Enter the City and State associated with the building. The building City and State
must be entered exactly the same as it was created.
6. Select Search and highlight the associated building once it appears.
7. Select Add.
EMS Software © 2018 / V44.1 / Page 71
CHAPTER 14: Hierarchy Overview and Settings
8. Select Save.
EMS Software © 2018 / V44.1 / Page 72
CHAPTER 14: Hierarchy Overview and Settings
CHAPTER 15: Hierarchy - Createa New Room(Hierarchy > Location & Rooms > + Rooms)
A Room and Equipment template, (to include all levels of the hierarchy and
fixed room equipment) is recommended for initial import. Thereafter, use the
instructions provided below to add or make changes to a room.
GENERAL
(Hierarchy > Location & Rooms > + Rooms > General)
ROOMEDITOR
1. Select General.join.me
2. Select the Building dropdown field and select the building that will house the new
room.
3. Use the Floor dropdown menu and select the building level at which the room will
be located.
4. Enter the Room Name.
EMS Software © 2018 / V44.1 / Page 73
CHAPTER 15: Hierarchy - Create a New Room
5. Enter the lowest and highest number of attendees in the Capacity fields. This is a
required field since it can be used as a room search parameter. To allow all avail-
able rooms to return, enter “0“ as the lowest capacity and consider maximum capa-
city when using attendees field. A 0-0 capacity will make the room available
regardless of the number of attendees invited.
If a room capacity is set at the lowest capacity of 5, a user must enter 5
attendees or greater in the attendees field in order for the room to return from a
search using the Web Scheduler application. If the highest capacity for a room
is set at 10, a user must enter 10 or less in the attendee field when utilizing the
room search feature. Capacity parameters can be ignored if the room is
reserved first and attendee counts thereafter.
6. Enter width, length, and identify the units from the Dimensions field.
7. Enter the minimum and maximum amount of time (in minutes) that a user can
reserve the room in the Duration field.
8. Enable Room Status feature to configure and display the current status of a room
to a user (e.g., Meeting in progress, Cleaning crew present).
The status is changed and maintained by an administrator who oversees the
managed rooms.
9. Identify and select the applicable Videoconference availability.
EMS Software © 2018 / V44.1 / Page 74
CHAPTER 15: Hierarchy - Create a New Room
10. Identify and select the type of room from the Room Usage dropdown field.
Normal – normal rooms can be viewed and reserved by all users.
Private – private rooms can be viewed and reserved by users who are owners
of the room.
Room owner groups are created in Applic-
ation>Users&Groups>Groups. See Groups. Owner Groups are
assigned to the room as well at Hier-
archy>Locations&Rooms>+Rooms>Owners. See Owners.
Restricted- restricted rooms can be viewed and requested for use by all users.
Users, that are NOT restricted group owners, will have to receive approval to
confirm the reservation of a restricted room.
Room owner groups are created in Applic-
ation>Users&Groups>Groups. See Groups. Owner Groups are
assigned to the room as well in Hier-
archy>Locations&Rooms>+Rooms>Owners. See Owners.
11. Enter and select the applicable BT Engage Site ID number.
12. Provide a bre.gf explanation of why a room is Out of Service. The Out of Service
feature allows an organization to temporarily take a room out of service (ie. Room
is being painted.)
EMS Software © 2018 / V44.1 / Page 75
CHAPTER 15: Hierarchy - Create a New Room
13. Select the Out of Service Start and End Date from the calendars.
14. Enter the email address of the room setup support contact in the Email to be noti-
fied of room work requests field. If the room has setup options, the email contact
address of the person in charge of setting the room up, must be entered. MP will
automatically generate an email to the contact person alerting them to the setup
reservation.
15. Enter the email address of the videoconference support contact in the Email to be
notified of video conference work requests field. If the room has videoconference
capability, the email contact address of the person in charge of setting the room
up, must be entered. MP will automatically generate an email to the contact person
alerting them to the videoconference reservation.
Note: All information entered on the Room Editor page can be viewed from
the ‘Resource Details’ window in the Web Scheduler and Add-in.
EMS Software © 2018 / V44.1 / Page 76
CHAPTER 15: Hierarchy - Create a New Room
DESCRIPTION
(Hierarchy > Location & Rooms > + Rooms > Descriptions)
1. Select Descriptions.
2. Use the General Description text box to include information to be displayed in
‘Room Details’ in the Add-in and ‘Resource Details’ from the Web Scheduler.
EMS Software © 2018 / V44.1 / Page 77
CHAPTER 15: Hierarchy - Create a New Room
3. Use the Special Description text box to include additional information to be dis-
played in ‘Room Details’ in the Web Scheduler and the final reservation notice
emailed to support crews and owners of delegate meetings.
General and Special Descriptions can be viewed by selecting the room door
from the Add-in Reservation page or by selecting the information icon to the
right of the desired room on the Web Scheduler calendar.
Room description from the Add-in
Room description from the Web Scheduler
EMS Software © 2018 / V44.1 / Page 78
CHAPTER 15: Hierarchy - Create a New Room
4. Use the Setup Description text box to include additional information to be dis-
played during the reservation setup process. The Setup Description is the ‘Room
Details’ page of Add-in application ONLY.
5. Select Save.
EMS Software © 2018 / V44.1 / Page 79
CHAPTER 15: Hierarchy - Create a New Room
(Hierarchy>Location&Rooms>+Rooms>Image)
1. Select Image.
2. Add an image from the Image Type dropdown field or Browse to upload an image.
Room images can be added to each room. Users can view the images from the
‘Room Details’ page. Images should be sized at approximately 300 - 200 px.
3. Select Add. Select View Image if you would like to preview the image just
uploaded.
4. Select Save.
VOICE/DATA
(Hierarchy > Location & Rooms > + Rooms > Voice/Data)
Select Voice/Data.
ADD VOICE LINES
1. Select and highlight the desired dial-up from the Voice Type dropdown field. Voice
lines can be added to each room. Users can view voice line information from the
‘Room Details’ page.
2. Select and highlight desired Country.
3. Enter the Area Code.
4. Enter the Local Number.
EMS Software © 2018 / V44.1 / Page 80
CHAPTER 15: Hierarchy - Create a New Room
5. Select Add.
6. Select Save.
ADD DATA LINES
1. Select and highlight the desired data line from the Data Type dropdown field. Data
lines can be added to each room. Users can view data line information from the
‘Room Details’ page.
2. Enter Data jack #.
3. Select Add.
4. Select Save.
FIXED EQUIPMENT
(Hierarchy > Location & Rooms > + Rooms > Equipment)
Equipment that is always in a room, is considered fixed equipment. Equipment
types must be imported into MP before fixed equipment can be added to a
room. See Equipment Types.
1. Select Equipment.
2. Select the fixed room Equipment Types.
EMS Software © 2018 / V44.1 / Page 81
CHAPTER 15: Hierarchy - Create a New Room
3. Select Add. In room equipment can be viewed from the ‘Room Details’ page in the
Add-in application, and from ‘Resource Details’ and the ‘Reservation Manager’
window of the Web Scheduler.
4. Select Save.
SETUP
(Hierarchy > Location & Rooms > + Rooms > Setup)
1. Select Setup.
2. Enable the Force Room Setup field to require a user to select a setup when
reserving the room.
EMS Software © 2018 / V44.1 / Page 82
CHAPTER 15: Hierarchy - Create a New Room
3. Enable Setup Options Available to view all room setup options from the room drop-
down field of the Web Scheduler ‘Reservation Manager’ window.
4. Select the applicable room setups from the Setup Options window.
5. Select Add.
6. Highlight the desired setup option and Set as Default.
7. If the new setup changes the room capacity, Change capacity and Update.
8. Enter the amount of setup buffer time (in minutes) required before the meeting.
9. Enter the amount of setup buffer time (in minutes) required after the meeting.
10. Select Save.
EMS Software © 2018 / V44.1 / Page 83
CHAPTER 15: Hierarchy - Create a New Room
OWNERS
(Hierarchy > Location & Rooms > + Rooms > Owners)
EMS Software © 2018 / V44.1 / Page 84
CHAPTER 15: Hierarchy - Create a New Room
All rooms default as normal user rooms. Associate rooms with user groups if
they are restricted or private rooms. Owners associated with such rooms can
reserve the rooms without approval.
Note: User Groups must be created before they can be assigned as room own-
ers.
1. Select Owners.
2. Enter the User Group’s Name to assign to the room.
3. Select Search.
4. Highlight the group name and Add.
5. Select Save.
EMS Software © 2018 / V44.1 / Page 85
CHAPTER 15: Hierarchy - Create a New Room
CUSTOM FIELDS
(Hierarchy > Location & Rooms > + Rooms > Custom Fields)
The order of custom fields can be modified from this setting. The Custom Field
Code can be modified. See Code Tables: Custom Fields section. Custom field
information can be made available in a report.
1. Select Custom Fields.
2. Edit next to the Custom Field Code to update.
Viewed in “Room Details’ in the Add-in application.
3. Enter the Custom Field Value.
The value should be numeric. It will be ve.gwed in sequential order. (ie. 1
is viewed first, 2 next, etc.)
4. Select Update and Save.
EMS Software © 2018 / V44.1 / Page 86
CHAPTER 15: Hierarchy - Create a New Room
BILLING
(Hierarchy > Location & Rooms > + Rooms > Billing)
The billing field is typically used to track room usage costs. The information can
be made available in a report. The field can be used to track items other than
rooms.
1. Select Billing.
2. Select Insert.
3. Enter the Billing Code.
4. Enter the Cost per Hour.
5. Enter the Cost per Day.
6. Select Insert and Save.
EMS Software © 2018 / V44.1 / Page 87
CHAPTER 15: Hierarchy - Create a New Room
EXCHANGE
(Hierarchy > Location & Rooms > + Rooms > Exchange)
The Exchange application is for organizations that have purchased the addi-
tional Meeting Planner Exchange Synch module.
1. Select Exchange.
2. Enable Room for Synchronization if additional Exchange Sync services were pur-
chased.
Please see Exchange Sync Guide.
3. Enter the SMTP Address.
EMS Software © 2018 / V44.1 / Page 88
CHAPTER 15: Hierarchy - Create a New Room
CHAPTER 16: Hierarchy - Com-bination Rooms(Hierarchy > Location&Rooms > + Combination)
Two or more rooms can be linked to create combination rooms in the MP Add-in
application ONLY. All combined rooms must be created manually. Read
through all of the combined room section before creating combination rooms.
Important: Setup, force room setup, buffers, and recurring reservation func-
tionality is unique to combined rooms.
COMBINATION ROOM SETUP OPTIONS
USING EXISTING SINGLE ROOMSETUP OPTIONS
Combination rooms inherit the setup options of the existing single rooms at the
time the combination room is created.
EMS Software © 2018 / V44.1 / Page 89
CHAPTER 16: Hierarchy - Combination Rooms
However, if the same setup types have different capacities, the combination
room will list types with capacities as separate setup options.
CREATING NEW SETUP OPTIONS FOR COMBINATION
ROOMS
If the setup options of a combination room are unique to those of the single
rooms, make temporary changes to the single room setups to create the
desired combination room. Once combination rooms are created, all setup
EMS Software © 2018 / V44.1 / Page 90
CHAPTER 16: Hierarchy - Combination Rooms
options are frozen regardless of future modifications made to the setup options
of single rooms.
Note: The single room setup options that are altered to create the desired
combination room must be reset after the new combination room has been
saved.
FORCE ROOM SETUP
To force the user to select a room setup for a combination room, all of the exist-
ing single rooms must have the option enabled.
Important: The Force Room Setup option is not a frozen combination room
setting; if the single room setting is changed, it will also be changed in the
combo room.
SETUP BUFFERS
Combination rooms inherit the setup buffer time of the existing single rooms at
the time the combination room is created. When creating a combination room,
EMS Software © 2018 / V44.1 / Page 91
CHAPTER 16: Hierarchy - Combination Rooms
make sure the buffer times are the same for the existing single rooms being
combined.
Important: The Setup Buffer is not a frozen combination room setting; if the
single room setting is changed, it will also be changed in the combo room.
EQUIPMENT
Equipment is not associated with combination rooms (neither as deliverable or
equipment that is fixed in a room). From the Add-in, best practices require that
users book the combo room from the Room Search tab, and then move to the
Equipment tab. When reserving equipment from the Equipment tab, com-
bination rooms will not show up as valid rooms to deliver equipment to. Instead,
you will need to select one of the rooms that makes up the combo room.
Ultimately, MP needs to have a single room to deliver equipment to.
RECURRING RESERVATIONS
Combination rooms cannot be reserved for recurring reservations. Instead,
reserve individual rooms to make up the combination room.
EMS Software © 2018 / V44.1 / Page 92
CHAPTER 16: Hierarchy - Combination Rooms
CREATING COMBINED ROOMS
GENERAL
(Hierarchy > Location&Rooms > + Combination > General)
Important: The combination room functionality applies to MP Add-in ONLY.
1. Select General.
2. Enter the Room Combination Name.
3. Enter the Lowest and Highest Capacity Range.
Based on single rooms being combined.
4. Enter the minimum and maximum amount of time (in minutes) that a user can
reserve the combo room in the Duration Min. and Max. fields.
COMBINED ROOMS
(Hierarchy > Location & Rooms > + Combination > Combined Rooms)
1. Select Combined Rooms.
2. Select the Building dropdown field and scroll to the building that will house the
new combined room.
EMS Software © 2018 / V44.1 / Page 93
CHAPTER 16: Hierarchy - Combination Rooms
3. Highlight and Add the rooms to combine.
4. Select Save.
SETUP
(Hierarchy>Location&Rooms>+Combination> Setup)
1. Select Setup.
2. Verify Setup options.
Make sure the setup for the individual rooms are the same so that the setup can
be shared as combined room.
BILLING
(Hierarchy > Location & Rooms > + Combination > Billing)
The billing field is typically used to track room usage costs. The information can
be made available in a report.
The field can be used to track items other than rooms.
1. Select Billing.
2. Select Insert.
EMS Software © 2018 / V44.1 / Page 94
CHAPTER 16: Hierarchy - Combination Rooms
3. Enter the Billing Code.
4. Enter the Cost per Hour.
5. Enter the Cost per Day.
6. Select Insert and Save.
EMS Software © 2018 / V44.1 / Page 95
CHAPTER 16: Hierarchy - Combination Rooms
CHAPTER 17: Hierarchy - Viewor Modify
COMPLETE HIERARCHY
VIEW ORMODIFY COMPLETE HIERARCHY
(Hierarchy>Locations&Rooms)
The Complete Hierarchy page allows an administrator to select all levels of the
hierarchy to view, edit or delete.
1. Select the edit or the delete tool on the right side of the level/location of the hier-
archy to modify.
2. Select Save.
EMS Software © 2018 / V44.1 / Page 96
CHAPTER 17: Hierarchy - View or Modify
CHAPTER 18: Hierarchy - Equip-ment Storage
CREATE A NEW STORAGE LOCATION
(Hierarchy>Equipment Storage>New Location)
Equipment Location Editor
GENERAL
(Hierarchy>Equipment Storage>New Location>General)
1. Select General.
2. Select the Building dropdown field and scroll to the building that will house the
new storage location.
3. Select the Shared Group dropdown field, scroll and highlight any storage location
of which equipment can be shared.
Individual equipment storage locations should be created before shared
locations are created.
4. Enter the storage Location Name.
EMS Software © 2018 / V44.1 / Page 97
CHAPTER 18: Hierarchy - Equipment Storage
5. Enter a General Description of the storage location.
The storage location General Description is viewed from the Add-in
ONLY. There are no character count restrictions for the field.
6. Select Save.
CONTACT
(Hierarchy>Equipment Storage>New Location>Contact)
1. Select Contact.
2. Enter Contact Description.
The Contact Description is viewed from the Add-in Only. There are no
character count restrictions for the field.
3. Enter Email address at which equipment notification should be sent.
Notification of a portable equipment reservation will automatically gen-
erate to the email address provided.
4. Select Save.
HOURS
(Hierarchy>Equipment Storage>New Location>Hours)
EMS Software © 2018 / V44.1 / Page 98
CHAPTER 18: Hierarchy - Equipment Storage
1. Select Hours.
2. Enter the storage location operating hours in the Hours Description field.
Storage location hours are viewed from the Add-in ONLY. There are no
character count restrictions for the field.
3. Select Save.
DIRECTIONS
(Hierarchy>Equipment Storage>New Location>Directions)
1. Select Directions.
2. Enter the Direction Description to the storage location.
Storage location directions are viewed from the Add-in ONLY. There are
no character count restrictions for the field.
3. Select Save.
CREATE A SHARED STORAGE LOCATION
(Hierarchy>Equipment Storage>New Shared Location)
EMS Software © 2018 / V44.1 / Page 99
CHAPTER 18: Hierarchy - Equipment Storage
Equipment storage locations can be combined so that equipment from multiple
locations can be reserved.
1. Select Insert and name the Shared Equipment Location.
2. Select Insert.
3. Navigate back to Hierarchy>Equipment Storage>New Location.
Enter the field information.
4. Select the Building from the dropdown field to include in the new Shared Equip-
ment location.
5. Select the Shared Group that will access the equipment.
6. Enter the Location Name of the Shared Equipment.
7. Select Save.
8. Repeat steps 4-7 until all desired storage locations have been added to the new
Shared Equipment Location.
EQUIPMENT LOCATION
(Hierarchy>Equipment Storage)
EMS Software © 2018 / V44.1 / Page 100
CHAPTER 18: Hierarchy - Equipment Storage
VIEW ORMODIFY EQUIPMENT STORAGE LOCATION
The Equipment Storage location page is used to view, edit, and delete equip-
ment storage location data.
1. Select the location to edit or select delete.
2. Save modifications.
EMS Software © 2018 / V44.1 / Page 101
CHAPTER 18: Hierarchy - Equipment Storage
CHAPTER 19: Resources - RoomSetup Options
ROOM OPTIONS
Rooms that can be setup in multiple ways must be identified using the setup fea-
ture. The MP Room Setup functionality can be used as a search parameter
using the Add-in application; users can search for specific room setup types.
Using the Web Scheduler application, room setup options will be viewed from
the dropdown box of the ‘Reservation Manager’ window. Setup type is not a
search parameter in the Web Scheduler.
ROOMSETUPS
View, Edit, and Delete from Master Room Setup List
(Resources>Room Options>Room Setups)
1. Select the desired Room Setup Name to view, edit or delete. Room setup name,
description and image can be added or modified from this page.
2. Select Save.
EMS Software © 2018 / V44.1 / Page 102
CHAPTER 19: Resources - Room Setup Options
CREATE NEWROOM SETUPS
(Resources>Room Options>Room Setups>New Room Setup)
1. Select New Room Setup.
2. Enter the Room Setup Name.
3. Enter the Room Setup Description. The Room Setup Description will be viewed
from the Master Room Setup List and in the email sent to the setup support crew.
4. Enable Upload Image and select Browse… to include an image of the setup.
5. Select Save.
NOTE: The new setup is viewable from the Master Room Setup List.
ROOMSETUP GENERAL SETTINGS
(Resources>Room Options>Room Setup General Settings)
NOTE: The room setup general settings are universal and apply to all rooms
with setup capabilities.
EMS Software © 2018 / V44.1 / Page 103
CHAPTER 19: Resources - Room Setup Options
1. Enable Room Setup Cut-Offs to enforce a cutoff time for reservations with a setup.
Disable the feature if there are no next day/hours before a meeting setup
cut-off requirements.
Select the Use Time of Day dropdown field and scroll to the cutoff time at which
a reservation must be created in order to reserve a next day reservation with
setup.
-OR-
Enter the number of Cut-off Hours Before a Meeting required to create a reser-
vation with setup.
2. Enable Show Setup is Required to force a user to make a setup type selection in
order to create a reservation.
3. Enable Allow Default Setup to select an automatic default setup for a room with
multiple setup options. The default setup is selected in room setup as well. See
Creating a New Room: Room Setup section.
4. Enable One Setup Per Day to prevent users from creating more than one setup
reservation per room, per day. The One Setup Per Day feature is for organizations
that cannot support more than one setup per room, per day.
EMS Software © 2018 / V44.1 / Page 104
CHAPTER 19: Resources - Room Setup Options
5. Enable Hide Capacity on Setup Dialogs if the capacity of your rooms does not
change due to setup configuration. Typically, room capacity is based on the size of
the room and the number of chairs available rather than setup configuration.
6. Select Save.
EMS Software © 2018 / V44.1 / Page 105
CHAPTER 19: Resources - Room Setup Options
CHAPTER 20: Resources - Equip-ment Options/Portable Equip-mentEquipment types refer to generic categories of similar pieces of equipment. The
equipment type is what a user will search for when creating a reservation. The
industry type for an equipment search is Audio Visual (A/V). Upon reservation
of A/V equipment, notifications are automatically generated to equipment sup-
port crew.
EQUIPMENT TYPES
CREATE NEW EQUIPMENT TYPE
(Resources > Equipment Options > Equipment Types List)
1. Insert and enter the Equipment type name. The Equipment Type Name is the
umbrella name for the generic category of similar pieces of equipment (e.g., Equip-
ment type: Laptop. Equipment: Laptop#1, Laptop#2, Laptop#3.) The Equipment
Type Name and Display Priority Sequence can also be edited and deleted from
this page.
EMS Software © 2018 / V44.1 / Page 106
CHAPTER 20: Resources - Equipment Options/Portable Equipment
2. Enter the Equipment Type Display Priority Sequence in increments of 10. The pri-
ority sequence determines the order that the equipment types will appear in . The
first equipment type on the list will be 10, the second 20, and so on. When equip-
ment types are added at a later date, this sequence will allow new types to be inser-
ted in the order desired without having to reconfigure the entire list.
3. Select Save.
VIEW ORMODIFY EQUIPMENT TYPE
The Equipment Type Editor Page allows an administrator to view, edit, or delete
equipment types.
1. Select edit or delete next to the equipment type to modify.
2. Select Save.
EQUIPMENTGENERAL SETTINGS
(Resources > Equipment Options > Equipment General Settings)
1. Enable Equipment Edit Cut-Offs to enforce a cutoff time for reservations with equip-
ment. Disable the feature if there are no next day/hours before a meeting
EMS Software © 2018 / V44.1 / Page 107
CHAPTER 20: Resources - Equipment Options/Portable Equipment
equipment cut-off requirements.
a. Select the Use Time of Day dropdown field and scroll to the cutoff time at which a
reservation must be created in order to reserve a next day reservation with equip-
ment.
-OR-
b. Enter the number of Cut-off Hours Before a Meeting required to create a reser-
vation with equipment.
2. Enable Show Equipment Tab to make the equipment tab available to the end user.
3. Enable Show Equipment Options for Room Search. A user can view the entire list
of equipment and use the feature as a search parameter. Thereafter, MP will indic-
ate whether the equipment is fixed in the room, available for delivery or if it is not
available. This feature is for the Add-in ONLY.
EMS Software © 2018 / V44.1 / Page 108
CHAPTER 20: Resources - Equipment Options/Portable Equipment
4. Enable Default Equipment Delivery for automatic delivery of all portable equipment
reservations. If users have the option to check in/out portable equipment, disable
the feature.
5. Enable Equipment Delivery Notes to allow a free-form text box for users to include
additional notes and equipment instruction. The information added to the notes box
is saved with the reservation and will be included in the email that is sent to the
portable delivery support crew.
6. Enable Default to All and Disable Storage to allow user to reserve equipment from
any storage location within the building. Equipment in storage locations on mul-
tiple floors within the same building will be available when the feature is utilized.
7. Enable Reserve Equipment By Type to allow user to search for equipment by type.
Disable to view the entire list of equipment.
8. Enable Move “All” to Bottom of Industry List. (Applicable to Add-in application
ONLY). From the equipment tab, the first dropdown on the equipment dropdown
list is “All” to allow viewing of the entire list equipment. When “All” is moved to the
bottom of the list, the search is narrowed according to Industry Type.
9. Enter the desired Equipment Tab Caption. (Add-in ONLY). The tab can be cus-
tomized to fit the organization’s needs.
10. Enter the Equipment Setup Buffer Time to attach to both ends of a reservation.
Equipment buffer times allow additional time before and after a reservation to make
sure equipment is available when it is reserved for multiple meetings.
11. Customize the Equipment Not Found Message to meet the organization’s needs.
Up to 250 characters allowed to formulate the message.
EMS Software © 2018 / V44.1 / Page 109
CHAPTER 20: Resources - Equipment Options/Portable Equipment
12. Customize the Policy for Reserving Equipment Without a Roommessage to inform
users of how to create an equipment reservation without a room. Up to 1000 char-
acters allowed to formulate the message.
13. Customize Message shown when Reservation misses the Equipment Set-up Cut-
off time to inform the user of the time at which they need to create an equipment
reservation before a meeting/for a next day meeting. Up to 250 characters allowed
to formulate the message.
PORTABLE EQUIPMENT
EQUIPMENT LIST
The Equipment List allows an administrator to view, edit, or delete portable
equipment.
1. Select/enter the Building, Industry, Equipment Name, Storage Location, Equipment
Type, and Equipment Serial # to search for a piece of equipment.
2. Select Search. MP will return an equipment list based on the search parameters
entered.
ADD NEW PORTABLE EQUIPMENT TO STORAGE
LOCATION
(Resources>Portable Equipment>New Equipment)
EMS Software © 2018 / V44.1 / Page 110
CHAPTER 20: Resources - Equipment Options/Portable Equipment
NOTE: Portable Equipment templates are recommended for initial portable
equipment import.
EQUIPMENT EDITOR
GENERAL
(Resources>Portable Equipment>New Equipment>General)
1. Select General.
2. Select the Building from the dropdown that you wish to have access to the portable
equipment.
3. Select the Storage Location associated with the building.
4. Select Audio/Visual Equipment from the Industry Type dropdown field.
5. Enter the Equipment Type. Equipment Type is the umbrella name for the generic
category of similar pieces of equipment (e.g., Laptop).
6. Enter the Equipment Name. Each piece of portable equipment needs to have a
unique name for tracking purposes (ie. Laptop#1, Laptop#2, Laptop#3).
7. Enter the Brand Name for tracking purposes.
8. Enter the Model Name for tracking purposes.
9. Enter the Serial Number for tracking purposes.
10. Enable Internal building reservations only if the equipment must physically stay at
the organization. If equipment can be reserved and taken off-site, disable the fea-
ture.
EMS Software © 2018 / V44.1 / Page 111
CHAPTER 20: Resources - Equipment Options/Portable Equipment
11. Enable Check-out/check-in required if equipment is not deliverable. When the fea-
ture is enabled, a user will not be able to request delivery and no email noti-
fications will be sent out. (Add-in Only.)
12. Select Save.
REMOVE ORMODIFY EQUIPMENT DATA
Select Clear to remove equipment data and start over.
Select View impacted Reservations to view any reservation that might be
effected by the changes made if this equipment piece was modified.
TAKE EQUIPMENT OUT OF SERVICE
Equipment can be temporarily taken out of service.
1. Select equipment piece to be taken out of service from the Equipment Editor or
Equipment List.
2. Enter Reason Equipment is taken out of service.
3. Enter Start Date equipment will be out of service.
4. Enter End Date equipment will be out of service.
5. Select Save.
DESCRIPTION
(Resources>Portable Equipment>New Equipment>Description)
EMS Software © 2018 / V44.1 / Page 112
CHAPTER 20: Resources - Equipment Options/Portable Equipment
1. Select Description.
2. Enter User Description. The user description is viewed from the Add-in ONLY.
From the Add-in application, select the equipment tab, and ron ‘reserved equip-
ment’ description. Up to 500 characters allowed to formulate the description.
3. Enter Admin Description. The admin description is viewed from the setting or in a
report ONLY. Up to 500 characters allowed to formulate the admin description.
4. Select Save.
OWNERS
(Resources > Portable Equipment > New Equipment > Owners)
Pieces of equipment are assigned to owner groups for reporting purposes
ONLY. Assigning equipment to owner groups will NOT affect functionality in
MP; owned equipment will be accessible to users in the same manner as port-
able equipment that is not assigned to owners.
1. Select Owners.
2. Enter the User Group’s Name equipment will be assigned to and Search.
3. Highlight the user Group Name and Add as equipment owners.
4. Select Save.
EMS Software © 2018 / V44.1 / Page 113
CHAPTER 20: Resources - Equipment Options/Portable Equipment
CHAPTER 21: Resources – Cater-ers
CATERERS
CATERING VENDORS
VENDOR LIST
(Resources > Caterers > Catering Vendors > Vendor List)
The catering vendor list page includes the list of internal and external catering
vendors that are associated with an organization. From this page, caterers can
be viewed, modified, and deleted.
CREATE INTERNAL CATERING VENDORS
(Resources>Caterers>New Caterer>General)
1. Select New Caterer.
2. Select General.
3. Select the Vendor Industry Type dropdown and select Internal Catering.
4. Enter the Vendor Name.
5. Enter the Vendor Homepage (URL) address (if applicable).
EMS Software © 2018 / V44.1 / Page 114
CHAPTER 21: Resources – Caterers
6. Select the time of day, from the Vendor reservation edit cut-off Time of Day field, at
which catering edits must be submitted in order to complete a next day catering
reservation. Disable if there is no cut-off time of day requirements.
—or—
Enter the number of Vendor Reservation edit Cut-off Hours Before a Meeting
required in order to complete a same day catering reservation.
7. Enter the Vendor carryout menu page (URL) address (if applicable). This is typ-
ically a link to the internal caterer’s menu.
8. Enter the Sales Tax (%).
9. Select Save.
HOURS
(Resources > Caterers > New Caterer > Hours)
1. Select Hours.
2. Enter the Internal Caterer’s business hours. Up to 500 characters allowed; addi-
tional information can be included.
ADDRESSES
(Resources > Caterers > New Caterer > Addresses)
More than one address can be used.
EMS Software © 2018 / V44.1 / Page 115
CHAPTER 21: Resources – Caterers
1. Select Addresses.
2. Select the Address Type from the dropdown field.
3. Enter the Internal Caterer’s address and .
4. Select Save.
CONTACTS
(Resources>Caterers>New Caterer>Contacts)
Two contacts per internal vendor are allowed.
1. Select Contacts.
2. Select either primary or secondary from Contact Type dropdown field.
3. Enter all additional contact field information and Add. Ensure you include the cater-
ing contact email address. Notifications of internal catering orders will auto-
matically be generated to the address entered.
4. Select Save.
SERVICED BUILDINGS
(Resources>Caterers>New Caterer>Serviced Buildings)
1. Select Serviced Buildings.
2. Highlight and Add the buildings at which the internal caterer will service.
3. Select Save.
EMS Software © 2018 / V44.1 / Page 116
CHAPTER 21: Resources – Caterers
CATERINGMENU
(Resources>Caterers>New Caterer>Catering Menu)
Catering migration templates are recommended for initial menu item import.
Thereafter, use the instructions provided below to add, edit, and delete catering
menu items.
Food Categories can be added or deleted.
1. Select Catering Menu.
2. Select the Food Category from the dropdown.
3. Insert new catering menu items by selecting Insert New Record.
EMS Software © 2018 / V44.1 / Page 117
CHAPTER 21: Resources – Caterers
4. Enter ‘1’ if the item is available or ‘2’ if the item is not currently on the menu but will
be available at a future date from the Active field. The active and inactive feature
allows seasonal items to be viewed or hidden and saved for future use.
5. Enter the food Item Name. Up to 50 characters (including spaces) can be used in
the field.
6. Enter the food item Description. Up to 200 characters (including spaces) can be
used in the field.
7. Enter the Price of the food item. Up to 5 characters (including spaces) can be used
in the field.
8. Enter the Tax Rate for the food item.
9. Select Insert and Save.
IMPORTANT: Menu items must be within the allowable character limits
described in order to be stored in MP.
CREATE EXTERNAL CATERING VENDORS
(Resources>Caterers >New Caterer)
1. Select New Caterer.
2. Select General.
3. Select the Vendor Industry Type dropdown and select Catering.
4. Enter the External Vendor Name.
5. Enter the External Vendor Homepage (URL) address.
EMS Software © 2018 / V44.1 / Page 118
CHAPTER 21: Resources – Caterers
NOTE: Remaining fields from the general tab are not applicable for external
catering.
HOURS, ADDRESSES, CONTACTS, AND CATERINGMENU
(Resources>Caterers>NewCaterer>Hours/Addresses/Contacts/Catering
Menu)
The fields from these pages can be used to store external vendor information
and can be captured in a report but will not be viewable to the end user or
provide any functionality when using MP. External catering orders must be
arranged with the external vendor.
SERVICED BUILDINGS
(Resources>Caterers>New Caterer>Serviced Buildings)
1. Highlight and Add the buildings at which the external caterer will service.
2. Select Save.
CATERING GENERAL SETTINGS
(Resources>Caterers> Catering General Settings)
EMS Software © 2018 / V44.1 / Page 119
CHAPTER 21: Resources – Caterers
1. Enable Catering to make the catering tab available to the end user.
2. Enable Show all Rooms in Catering Work Orders for reporting purposes ONLY.
The feature will NOT affect functionality in MP.
3. Enable Catering Instructions Required to force an end user to include catering
instructions with the catering reservation.
4. Enable Additional Email Field on Catering Order Page to allow a second email
contact field in MP. When the feature is enabled, an email catering order noti-
fication will be sent to both internal catering contact addresses provided.
5. Use Vendor Sequence formatting for Tracking Numbers to allow MP to auto-
matically create sequential tracking numbers by caterer (e.g., Caterer A will have
tracking numbers: A0001, A0002, etc.; Caterer B will have B0001, B0002, etc.).
IMPORTANT: The Enable Extra Catering Field is a legacy setting. Please dis-
able.
6. Enable Prepopulate Catering Delivery Information to populate the catering instruc-
tions (in the email confirmation sent) when a user makes a catering order. The data
populated will include all reservation information attached to the reservation (e.g.,
Rooms, equipment, etc.).
7. Customize the Catering Tab Caption (e.g., Catering and Services).
8. Customize the Catering Instructions Label.
EMS Software © 2018 / V44.1 / Page 120
CHAPTER 21: Resources – Caterers
IMPORTANT: The Label for First, Second and Third Extra Catering Fields
are legacy fields. Please disable.
9. Enter the Catering Payment Policy for end users to view when creating a catering
reservation in the Add-in application ONLY. Up to 250 character allowed.
10. Select Save.
EMS Software © 2018 / V44.1 / Page 121
CHAPTER 21: Resources – Caterers
CHAPTER 22: Resources – Video-conferenceVIDEOCONFERENCE GENERAL SETTINGS
(Resources>Videoconferencing)
NOTE: Rooms with videoconferencing can be identified when using the
Room and Equipment template.
1. Enable Video Conferencing if it is available at the organization.
2. Enable Videoconference Presenter Required to force the user to identify the
videoconference presenter in order to create the reservation.
3. Enable Prompt User if Room is VC Capable in the Add-in ONLY. Rooms that sup-
port videoconferencing are identified with a videoconferencing icon from the room
dropdown menu in the Web Scheduler application.
EMS Software © 2018 / V44.1 / Page 122
CHAPTER 22: Resources – Videoconference
4. Enable One VC per Room per Day to limit VC use to one per applicable room per
day. This setting is dependent on whether an organization can support more than
one VC reservation per room per day.
5. Enable Show Additional VC Information to view additional information (e.g.,
phone numbers, billing codes, etc.).
6. Name the VC Call Receiver (e.g., Attendee).
7. Name the VC Call Presenter (e.g., Presenter). An email is automatically gen-
erated and sent to the Presenter.
8. Enter the Minimum # of Rooms Required for Video Conference. The minimum
number must be 1 or greater.
9. Enter the Maximum # of Rooms for Video Conference Bridging. We recommend 4
or greater. The organization can identify the maximum number of rooms that can
be reserved with a videoconference reservation.
10. Enter the description or instructions for bridging conference rooms in Video-
conference Rooms for Bridging Description. Identifying the maximum number of
videoconference rooms determines whether the room is considered bridging.
EMS Software © 2018 / V44.1 / Page 123
CHAPTER 22: Resources – Videoconference
EMS Software © 2018 / V44.1 / Page 124
CHAPTER 22: Resources – Videoconference
CHAPTER 23: Application -Users & Groups
USERS & GROUPS
(Application > Users & Groups)
All Users are typically imported into MP upon Active Directory installation.
All user and group specific settings (security permission) are identified in
Groups: Security section.
USERS
CREATING A NEW USER
(Application>Users & Groups > Users>New User)
1. Enter the user’s Login. The login is the user’s Windows logon name. It should not
be domain qualified. It should be the same as the account name as it is listed in the
Active Directory.
2. Enter the user’s Email address. The user’s email address will be used to notify a
user of items such as work request confirmation, and user profile verification.
EMS Software © 2018 / V44.1 / Page 125
CHAPTER 23: Application - Users & Groups
3. Enter the user’s Display/First/Last Name, and Phone Number in the associated
fields.
4. Enter a Tag(s) to the user’s profile as a means to identify the user. A tag can be
used as a search criteria in a report (e.g., finance dept).
5. Select the Building field and choose the location from which the individual will typ-
ically create reservations. The building will automatically default when creating a
reservation.
6. Enter the Reservation Horizon Override if the number of days in advance a user
can create a reservation is different than the global setting.
7. Enable Can Reserve On Behalf of Other Users to allow a user to create delegate
reservations.
8. Click on the “X’ next to the user group(s) of which the user should associate. All
users default as normal end users upon active directory installation. The icon will
appear to indicate that the user is a member of the group. Individuals are assigned
to user groups according to the security permissions granted.
NOTE: Security permissions are accumulative. A user will have access to all
of the pages assigned to them in each of the groups they are associated with
(even if the pages differ).
ICON USER GROUP
Not a Member of User Group
EMS Software © 2018 / V44.1 / Page 126
CHAPTER 23: Application - Users & Groups
ICON USER GROUP
Member of User Group
Administrator of User Group
9. Select Save.
CREATING A PUBLIC/DEFAULT USER PROFILE
(Application > Users & Groups > Users > New User)
EMS Software © 2018 / V44.1 / Page 127
CHAPTER 23: Application - Users & Groups
A public/default profile user must be set up to utilize the Public Mode feature in
MP. In this configuration, users will be logged in under the public profile created.
CREATING A SUBMIT A REQUEST PROFILE
(Application>Users & Groups > Users>New User)
A Submit a Request profile user must be set up to utilize the Public Submit a
Request feature in MP. In this configuration, users will be logged in under the
Submit a Request profile created.
MODIFYING A USER’S PROFILE
(Application>Users & Groups > Users)
EDIT A USER’S PROFILE
1. Enter the first few letter of the user’s name and Search. Select the user’s name to
pull up their user profile. All of the user’s fields can be updated.
2. Select Save.
DELETING A USER'S PROFILE
1. Enter the first few letter of the user’s name and Search. Select the user’s name to
pull up their user profile.
2. Select Delete.
EMS Software © 2018 / V44.1 / Page 128
CHAPTER 23: Application - Users & Groups
3. Select OK from pop up message to confirm that you want to delete the user profile
from MP.
NOTE: If the user has existing reservations, MP will force you to reassign the
meetings to another user.
GROUPS
Upon installation, all users are granted basic reservation rights by default when
MP is installed. This means that all normal users have access to the Outlook
Add-in but not the Web Scheduler. If there are users that need access to the
Web Scheduler calendar, configuration/setup menu, reports, etc., additional
user groups must be created to include application items (security permissions)
to permit such access.
PRIVATE AND RESTRICTED GROUPS
Organizations that utilize Private and Restricted Rooms need to add room own-
ers to the groups in order for the feature to carryout its function in MP.
Private room group owners are given exclusive access to the identified private room
(s) and are the only users that can book the room(s). End users cannot request private
room usage.
EMS Software © 2018 / V44.1 / Page 129
CHAPTER 23: Application - Users & Groups
Restricted room group owners are able to reserve the identified restricted room(s)
without prior approval. End users can request restricted room usage, however, an
assigned administrator of the restricted room group will need to approve or deny the
reservation request.
PUBLIC MODE USER GROUP
A Public Mode user group must be created to utilize the Public Mode feature in
the Web Scheduler ONLY.
SUBMIT A REQUEST USER GROUP
A Submit a Request user group must be created to utilize the request form fea-
ture in the Web Scheduler ONLY.
CREATING A NEW USER GROUP
(Application > Users & Groups > Groups > New User Group)
INDIVIDUALS
1. Select Individual.
2. Enter the name of the new group in the Group Name field.
3. Enter the (full or first few characters of) Login ID/First/Last Name of the individual to
include in the group.
4. Select Search and click to highlight the user’s name when it appears.
5. Select Add and Save.
EMS Software © 2018 / V44.1 / Page 130
CHAPTER 23: Application - Users & Groups
6. Repeat steps 3 through 5 above until all desired users are added to the group.
7. Select Save.
ASSIGN AN ADMINISTRATOROF THE RESTRICTED ROOMGROUP
An administrator must be assigned to the Restricted Room Group. They are the
individual who will approve and deny end user restricted room requests.
1. Select individuals.
2. Select to highlight the individual from the ‘Current Individuals’ box.
3. Select Toogle Admin Role to assign the individual the Administrator role for the
group. The Administrator of the Restricted Group will receive restricted room
requests. It will be the Administrator’s responsibility to approve and deny requests.
Once approved or denied, a notification will automatically be generated to the
requester.
CLIENT GROUPS
IMPORTANT: Legacy tab in Meeting Planner and should be ignored.
ROOMS
The rooms tab will provide a list of the rooms that are owned by the group.
NOTE: Owners are assigned to rooms through the Room Editor.
EMS Software © 2018 / V44.1 / Page 131
CHAPTER 23: Application - Users & Groups
EQUIPMENT
Pieces of equipment are assigned to owner groups for reporting purposes
ONLY. Assigning equipment to owner groups will NOT affect functionality in
MP; owned equipment will be accessible to users in the same manner as port-
able equipment that is not assigned to owners.
SECURITY
The application items (security permissions) added to a group will determine
the access the users of the group will have in MP.
1. Select Security.
2. Select the Reservation main page dropdown field for the list of application items
(security permissions).
3. Select to highlight, and Add the ‘Application Item’ (security permissions) to the iden-
tified group.
4. Repeat step 2 above until all necessary application items for the group have been
added.
5. Select Save.
EMS Software © 2018 / V44.1 / Page 132
CHAPTER 23: Application - Users & Groups
EDIT A USER GROUP
(Application > Users & Groups > Groups)
1. Select the group name to edit.
2. Make edits.
ADD/REMOVE AN INDIVIDUAL FROM THE GROUP:
1. Edit the Admin role.
2. Highlight the user in the “Current Individuals” window and select Toggle Admin
Role to identify the user as the administrator of the group or to change them from
Administrator back to a Normal user again. This can also be done through the
‘User Editor’ page and by selecting the associated icons.
EMS Software © 2018 / V44.1 / Page 133
CHAPTER 23: Application - Users & Groups
ADD/REMOVE APPLICATION ITEMS FROM THE SECURITY TAB:
1. To Add/Remove application items, highlight the items and select Add or Remove.
2. Select Save.
DELETE A USER GROUP
(Application > Users & Groups > Groups)
1. Select Delete next to the User Group to remove from MP.
2. Select OK from pop up message to confirm that you want to delete the group profile
from MP.
3. Select Save.
USER GENERAL SETTINGS
(Application>Users & Groups>User General Settings)
The user general settings apply to all users in both the Add-in and the Web
Scheduler applications.
1. Enter the Default time Zone from the dropdown field.
2. Enter the Default Business Hours Start and End time from the dropdown fields.
3. Enter the Default Billing Code if applicable. The default billing code will auto-
matically default unless the user enters a different code when creating a reser-
vation.
EMS Software © 2018 / V44.1 / Page 134
CHAPTER 23: Application - Users & Groups
CHAPTER 24: Application - EmailTemplates(Application > Email Templates)
This section includes the HTML templates and keywords for all automated
emails in Meeting Planner.
IMPORTANT: Remember to Save once all template information is entered.
1. Enter the SMTP Server address. The SMTP server has, most likely, already been
set by the IT department during the product installation.
2. Enter the MeetingPlanner@(your server).com From Address field. The “from”
address, will be the address any emails generated by MP will be from. The email
address does not need to exist within your organization.
RESTRICTED ROOMREQUEST TEMPLATE
The template is used to create the email sent to all room owner administrators
when a “normal” end user requests a restricted room reservation.
3. Identify and select, from the dropdown field either the Owner or Delegate to receive
a copy of the restricted room request. The administrator of the restricted room will
EMS Software © 2018 / V44.1 / Page 135
CHAPTER 24: Application - Email Templates
also receive the room request. In order to carryout this feature in MP, owners are
named administrators of the restricted group. See Assigning an Administrator of
the Restricted Room Group. Once they receive restricted room requests, they are
required to either approve or deny the restricted room reservation. At which time,
the requester will be notified.
4. Enter the email subject, body, and operation messages.
RESTRICTED ROOMRESPONSE TEMPLATE
The template is used to create the email sent to the “normal” end user who
requested the restricted room reservation.
5. Identify and select, from the dropdown field, either the Owner or Delegate user to
receive the restricted room response.
6. Enter the email subject, body, and operation messages. Use the list of available
keywords as needed.
ROOMSETUP WORK REQUEST TEMPLATE
The template is used to create the email sent to the designated room setup con-
tact and either the Owner or Delegate when a room setup is reserved, updated,
or deleted.
7. Identify and select, from the dropdown field, either the Owner or Delegate to
receive a copy of the work request. The “To” email address is set for each room:
see Hierarchy > Locations&Rooms >(select room) > Email to be notified of room
work requests.
EMS Software © 2018 / V44.1 / Page 136
CHAPTER 24: Application - Email Templates
8. Enter the email subject, body, and operation messages. Use the list of available
keywords as needed.
EQUIPMENT DELIVERY WORK REQUEST TEMPLATE
The template is used to create the email sent to the designated portable equip-
ment delivery contact and either the Owner or Delegate when portable equip-
ment is reserved, updated, or deleted.
9. Identify and select, from the dropdown field, either the Owner or Delegate to
receive a copy of the equipment delivery work request. The “To” email address is
set for each room: Equipment Storage > (select storage location) > Contact >
Email.
10. Enter the email subject, body, and operation messages. Use the list of available
keywords as needed.
CATERINGWORK REQUEST TEMPLATE
The template is used to create the email sent to the designated catering contact
and either the owner or delegate when an order is placed, updated, or deleted.
11. Identify and select, from the dropdown field, either the owner or delegate to receive
a copy of the catering order. The “To” email address is set for each caterer at:
Resources>Caterers >(select catering vendor)>contacts>email.
12. Enter the email subject, body, and operation messages. Use the list of available
keywords as needed.
EMS Software © 2018 / V44.1 / Page 137
CHAPTER 24: Application - Email Templates
VIDEOCONFERENCEWORK REQUEST
The template is used to create the email sent to either the owner or delegate
when videoconferencing is reserved, updated, or deleted.
13. Identify and select, from the dropdown field, either the owner or delegate to receive
a copy of the videoconference reservation. The “To” email address for video-
conferencing is set for each room at: see Hierarchy>Locations&Rooms>(select
room)> Email to be notified of room video conference work requests.
14. Enter the email subject, body, and operation messages. Use the list of available
keywords as needed.
REQUEST FORM TEMPLATE
The template is used when a user requests a room via the “request form.”
15. Enter the email contact address of the designated administrator responsible for
general room requests.
16. Enter the email subject, body, and operation messages. Use the list of available
keywords as needed.
EMS Software © 2018 / V44.1 / Page 138
CHAPTER 24: Application - Email Templates
CHAPTER 25: Reservation Attrib-utes(Application > Reservation Attributes > Request Form Fields)
REQUEST FORM FIELDS
The request form will allow a user, with restricted MP access, to request a
resource reservation. An administrator will be assigned to accept or deny such
requests. It is up to the organization to inform the requestor of the status of their
requested reservation.
A user profile and group to include the ‘create request’ application item (security
permission) will need to be created. Users who utilize the request form will need
to be associated with the group.
Customize and enable the request form fields to collect the necessary inform-
ation from the requester.
EMS Software © 2018 / V44.1 / Page 139
CHAPTER 25: Reservation Attributes
BILLING CODES
1. Enable Show Billing Information to view field from the reservation page.
2. Enable Billing Information Required to force a user to enter a billing code in order
to create a reservation.
3. Enable Validate Billing Information to verify billing codes. When utilizing the fea-
ture, MP will only allow reservations to be made when a preapproved billing code
has been entered. Billing codes must be entered via a script or in #4 below in order
for MP to carryout the billing validation function.
4. Add Valid Billing Codes. A list of billing codes must be provided, via a support
ticket, to utilize this feature or they can manually be entered. (Billing codes can be
provided using an excel worksheet, word doc, etc.)
5. Select Save.
EMS Software © 2018 / V44.1 / Page 140
CHAPTER 25: Reservation Attributes
ACTIVITY CODES
Activity Codes can be customized and used to collect additional meeting inform-
ation. A list of activity codes must be provided, via a support ticket, to utilize this
feature or they can manually be entered. Activity codes can be scripted by the
EmergingSoft support team and returned for import. (Activity code lists can be
provided using an excel worksheet, Word doc, etc.)
1. Enable Select Default Activity to identify the activity code MP will automatically
default to. When default activity is enabled, MP will automatically populate the field
with the first activity choice on the list (e.g., if Activity Code choices are: 1111,
2222, 3333, the default will be 1111 as it is the first option listed).
2. Enable Mandatory Code Selection to automatically populate a default code if the
user does not make an activity code selection.
3. Name Activity Code 1 field and Enable the setting to view and utilize the field from
the MP Reservation window. The Required field will automatically become
enabled when Mandatory Code Selection is utilized.
EMS Software © 2018 / V44.1 / Page 141
CHAPTER 25: Reservation Attributes
4. Repeat steps 1 – 3 above to utilize additional Activity Code fields.
5. Select Save.
CLIENTMATTER
The client matter feature includes two related dropdown boxes. The selection
made in the first dropdown will determine the options that are available in the
second dropdown. A list of client matter data must be provided via the template
and a support ticket, to utilize this feature or they can manually be entered.
1. Enable Use Partial C/M Client Search to allow partial search capabilities. Partial
search allows a user to enter the first few characters of their search and MP will
return the selection accordingly.
2. Enable the setting to view the field from the MP ‘Reservation Manager” window.
Has been a
3. Enable Required to force MP to default the first set of data from the Client data list
unless: a) the user makes a different selection, or b) a billing code is included in
EMS Software © 2018 / V44.1 / Page 142
CHAPTER 25: Reservation Attributes
the user’s profile.
4. Name the Client field (e.g., Dept).
5. Name the Matter field (e.g., Code).
6. Enter the Available Values and Add.
7. Select Save.
CUSTOM FIELDS
The custom field feature is used to capture additional reservation data.
1. Enable Used, to view and use the field from the ‘Manager Reservation’ window.
2. Enable Required to force a user to enter data in the field in order to complete the
reservation.
3. Enter the Label field name.
4. Include a Default field name that MP will automatically default to if the user
bypasses field entry. Default entry needs to be made regardless if the field is set to
required in number 2 above.
5. Repeat steps 1-4 above to utilize the remaining custom fields available.
EMS Software © 2018 / V44.1 / Page 143
CHAPTER 25: Reservation Attributes
6. Select Save.
EMS Software © 2018 / V44.1 / Page 144
CHAPTER 25: Reservation Attributes
CHAPTER 26: Application CodeTables(Application>Code Tables)
Activity Code, Food Item Types, Industry Types, Room Custom Fields, and
Room Status Text, and Room Status Color can be modified in Code Tables.
Code tables allow organizations to customize the dropdown selection available
to users.
IMPORTANT: Utilize code tables to modify Activity Code, Food Item Types,
Industry Types, Room Custom Fields, and Room Status Text, and Room
Status Color ONLY.
ADD/EDIT/DELETE ACTIVITY CODES
(Application>Code Tables>Activity Codes)
1. Select Activity Code from the Code Table dropdown.
2. Select Insert New Record to add a new Item Description (Activity Code) to the
Activity Code dropdown Menu.
EMS Software © 2018 / V44.1 / Page 145
CHAPTER 26: Application Code Tables
3. Enter an Item Value. All Item Values must have a unique single or double code;
duplicate item values cannot be used. Select Edit to modify the Item Value.
IMPORTANT: Changing the item value will disassociate all previous reser-
vations associated with that item value.
4. Enter the Item Description. The item description will include the activity code drop-
down options.
5. Select Edit or Delete to modify the item description.
6. The Item Comments field is typically used to color code meetings (e.g., #E1F502).
7. Use color picker and enter activity color in Item Comments field. Meetings will be
color coded on Web Scheduler calendar ONLY.
NOTE: A maximum of 2 colors can be assigned to 2 activity code fields. Col-
ors assigned to Activity Code 1 will color code the body of the reservation. Col-
ors assigned to Activity Code 2 will color code the bar above the reservation.
8. Select Insert again to add and save the new Item Description (Activity Code).
NOTE: Item Descriptions (Activity Codes) are displayed from the dropdown
activity field of the ‘Reservation Manager’ window in the order that they are lis-
ted in the table.
EMS Software © 2018 / V44.1 / Page 146
CHAPTER 26: Application Code Tables
View of Code Table Activity Code Setting Page
View of Activity Code dropdown selection fromWeb Scheduler ‘ReservationManager’ window
View of Color Coded Activity Codes fromWeb Scheduler calendar
EMS Software © 2018 / V44.1 / Page 147
CHAPTER 26: Application Code Tables
ADD/EDIT/DELETE FOOD ITEM TYPES
(Application>Code Tables>Food Item Types)
9. Select Food Item Types from the Code Table dropdown.
10. Select Insert New Record to add a new Item Description (category) to the Internal
Catering dropdown Menu.
11. Enter an Item Value. All Item Values must have a unique single or double code;
duplicate item values cannot be used. Select Edit to modify the Item Value.
IMPORTANT: Changing the item value will disassociate all previous reser-
vations associated with that item value.
12. Enter the Item Description. The item description will be a category that houses
similar menu items (e.g., Beverages). Select Edit or Delete to modify the item
description.
NOTE: Item Descriptions (Food Item Type categories) are displayed in order
according to the item value entered. Food Item Descriptions with value item
“A” will be displayed first, “B” second, etc. from the dropdown menu of the
MeetingPlanner reservation page.
View of Code Table Food Item Types Setting Page
EMS Software © 2018 / V44.1 / Page 148
CHAPTER 26: Application Code Tables
View of Food Item Types dropdown menu fromWeb Scheduler ‘ReservationManager’ window
View of Food Item Types dropdown menu from Add-in ‘Reservation Manager’window
13. Select Insert again to add and save new Item Description (category).
NOTE: Comments field is a Food Items Types legacy setting.
EMS Software © 2018 / V44.1 / Page 149
CHAPTER 26: Application Code Tables
ADD/EDIT/DELETE INDUSTRY TYPES
(Application>Code Tables>Industry Types)
IMPORTANT: Industry Types are viewed in Add-in application ONLY.
Do not delete A/V equipment type. Industry type is used as a MP search para-
meter (typically for portable equipment). Automatic emails are generated from
this field as well.
1. Select Industry Types from the Code Table dropdown.
2. Select Insert New Record to add a new Item Description (category) to the Industry
Types dropdown Menu.
3. Select Edit or Delete to modify the item description.
4. Enter an Item Value. All Item Values must have a unique single or double code;
duplicate item values cannot be used. Select Edit to modify the Item Value.
IMPORTANT: Changing the item value will disassociate all previous reser-
vations associated with that item value.
5. Enter the Item Description. The item description will be a category that houses
similar items.
6. Select Edit to modify the item description.
EMS Software © 2018 / V44.1 / Page 150
CHAPTER 26: Application Code Tables
NOTE: Item Descriptions (categories) are displayed in order according to the
item value entered. Item Descriptions with value item “A” will be displayed
first, “B” second, etc. from the dropdown menu of the MP Reservation window.
7. Select Insert again to add and save new Item Description (category).
NOTE: Comments field is an Industry Type legacy setting.
View of Code Table Industry Types Setting Page
View of Industry Types dropdown from Add-in
EMS Software © 2018 / V44.1 / Page 151
CHAPTER 26: Application Code Tables
ADD/EDIT ROOMCUSTOM FIELDS
(Application>Code Tables>Room Custom Fields)
IMPORTANT: Custom Fields are viewed in Add-in application ONLY.
1. Select Room Custom Fields from the Code Table dropdown.
2. Select Insert New Record to add a new Item Description (category) to the Room
Custom Fields dropdown Menu.
3. Enter an Item Value. All Item Values must have a unique alpha and/or numeric
code; duplicate item values cannot be used. Select Edit to modify the Item Value.
IMPORTANT: Changing the item value will disassociate all previous reser-
vations associated with that item value.
4. Enter the Item Description.
5. Select Edit or Delete to modify the item description.
NOTE: Item Descriptions (categories) are displayed in order according to the
item value entered. Item Descriptions with value item “A” will be displayed
first, “B” second, etc. from Room Details window of Add-in. Custom Field data
can be collected in a report through the Web Scheduler.
EMS Software © 2018 / V44.1 / Page 152
CHAPTER 26: Application Code Tables
6. Select Insert again to add and save new Item Description (category).
NOTE: Room custom fields can be added to each room. See Room Custom
Fields. Once the fields are added, they can be viewed from Room Details in
the Add-in application.
View of Custom Fields in Add-in
EMS Software © 2018 / V44.1 / Page 153
CHAPTER 26: Application Code Tables
ADD/EDIT ROOMSTATUS
(Application>Code Tables>Room Status Color)
To utilize the Room Status feature, enable room status from each room.
ROOM STATUS TEXT
(Application>Code Tables>Room Status Text)
1. Select Room Status Text from the Code Table dropdown.
2. Select Insert to add a new Item to the Room Status dropdown Menu.
3. Enter an Item Value. All Item Values must have a unique alpha and/or numeric
code; duplicate item values cannot be used. Select Edit to modify the Item Value.
IMPORTANT: Changing the item value will disassociate all previous reser-
vations associated with that item value.
4. Enter the Item Description.
5. Select Insert to save.
ROOM STATUS COLOR
(Application>Code Tables>Room Status Color)
EMS Software © 2018 / V44.1 / Page 154
CHAPTER 26: Application Code Tables
1. Select Room Status Color from the Code Table dropdown.
2. Select Insert and enter the same Item Value as entered in Room Status Text. The
Text and Color are connected via a common Item Value.
3. Enter the desired hex color in the Item Description (e.g., #BOBBE7; hex color
chosen from color picker).
4. Select Insert to save.
EMS Software © 2018 / V44.1 / Page 155
CHAPTER 26: Application Code Tables
CHAPTER 27: IntegrationsEWS
(Application>Integrations>EWS)
The setting allows the Web Scheduler to integrate with ExchangeWeb Ser-
vices. In other words, this feature allows Web Scheduler reservations to syn-
chronize to user’s Outlook calendars.
Outlook calendars synchronize to the Web Scheduler with or without the EWS
feature.
1. Enter the EWS URL provided upon installation (e.g., https//ex-
change.acme.com/ews/exchange.asmx).
2. Enter the EWS Service Account provided upon installation. (Please see the IT
support member from your organization that installed EWS for service account
information.)
3. Enter the EWS Service Account Domain.
4. Enter the EWS Service Account Password. (Please see the IT support member
from your organization that installed EWS for service account password.)
5. Enable Ignore SSL Errors. When the EmergingSoft service connects to EWS, a
basic certificate review is completed. If there are issues with the certificate (pre-
venting the service from running), but are acceptable to the organization, the
EMS Software © 2018 / V44.1 / Page 156
CHAPTER 27: Integrations
ignore SSL errors option should be enabled. If enabled, the EmergingSoft service
will ignore the errors.
6. Enable Set Reservation Notes as Body Text in Appointment. This overwrites any
previous text in the appointment.
7. Select Save.
COMMSCOPE, MEETINGPLACE, MEETMELINES,
TANDBERG, LATITUDE, VYOPTA, BT ENGAGE
(Application>Integrations> Comm-
scope/MeetingPlace/MeetMeLines/Tandberg/Latitude, Vyopta/BT Engage)
Enable and complete the field settings from the applicable Integration pages.
Please contact the integration product owner for additional information.
IMPORTANT: Remember to Save after completing each integration page.
EMS Software © 2018 / V44.1 / Page 157
CHAPTER 27: Integrations
CHAPTER 28: Core Con-figuration - Global SettingsGLOBAL SETTINGS
(Application>Core Configuration>Global Settings)
The settings that affect general business rules in both the Add-in and the Web
Scheduler applications.
1. Select the desired Location Format from the dropdown fields. The location format
determines the order in which the room will be reserved (e.g., if the room is
reserved according to “Building, Room”—as recommended—the Location field in
the Outlook, and ‘Reserved Rooms Resource’ window in the Add-in will be pop-
ulated as shown below).
Outlook View
EMS Software © 2018 / V44.1 / Page 158
CHAPTER 28: Core Configuration - Global Settings
Add-in View
2. Select the Server Date/Time Format from the dropdown field. The date and time
format imported during Active Directory Synchronization.
3. Enter the Help URL. This is typically an internal documentation page where users
access guides or help videos.
4. Enter the Reporting URL from the SSRS installation. Once SQL reporting ser-
vices are setup, the reporting URL is provided (e.g., http://TEGOKU:80/Reports).
5. Enter the Maximum Number of Days into the Future for a Reservation. The num-
ber entered will determine how many days in advance a reservation can be
booked. MP allows a maximum of 999 days.
NOTE: The maximum number of days individual user’s create a reservation
can be customized from the User Editor page.
EMS Software © 2018 / V44.1 / Page 159
CHAPTER 28: Core Configuration - Global Settings
CHAPTER 29: Core Con-figuration - Web SettingsWEB SETTINGS
(Application>Core Configuration>Web Settings)
The settings that affect general business rules and formatting options in the
Web Scheduler ONLY.
1. Customize the name of the Primary Resource Type Singular (e.g., Room). The
primary resource type identifies the name of the main resource reflected from the
‘Reservation Manager’ page and messages.
2. Enter the Primary Resource Type Plural (e.g., Rooms). The plural form of the
primary resource type is reflected in pop up messages when applicable.
EMS Software © 2018 / V44.1 / Page 160
CHAPTER 29: Core Configuration - Web Settings
3. Select either 12 or 24 (military time) from the Hour format dropdown field. The
hour format allows a user to toggle between either 12-hour or 24-hour formatting
within the single day view of the calendar interface.
NOTE: The ‘Reservation Manager’ window will adhere to the com-
puter’s/browser’s localization settings.
IMPORTANT: An IIS reset is necessary to view immediate Hour Format set-
ting changes.
4. Select the Daily View Sort By from the dropdown. The feature organizes the
rooms on the calendar by either building or building and floor. Building and floor
is applicable ONLY if buildings have floors in MP.
5. Enter the Public/Default User Profile (if applicable to your organization). The
default profile will be used creating a Public/Default User Creating a Public/De-
fault User Group.
6. Enter the Refresh Interval in seconds to identify the interval at which Web Sched-
uler will refresh the display. Enter 0 to disable the function. (Beta) The Web
Scheduler can be setup to refresh on a regular interval. This will allow room
statuses and reservations to be refreshed every X seconds.
7. Enable Public Meeting Mode to allow public view of the Web Scheduler calendar.
By enabling Public Meeting Mode, a checkbox within the ‘Reservation Manager’
EMS Software © 2018 / V44.1 / Page 161
CHAPTER 29: Core Configuration - Web Settings
window will appear allowing users to make a reservation public. All public reser-
vations are displayed on the public Web Scheduler site.
8. Enable Show Capacity in Daily View to view room capacity from the Web Sched-
uler calendar.
9. Enable Show Notes. The notes box is a free form text box available so that a user
can include additional information with their reservation. Information from the note
box is saved with the reservation, accessible via reports, and email notifications.
EMS Software © 2018 / V44.1 / Page 162
CHAPTER 29: Core Configuration - Web Settings
10. Enable Require Subject. This will force the user to include the subject of the meet-
ing in order to complete the reservation.
11. Enable ‘Invitees’ Functionality on Reservation Form to enable the attendees field
in the ‘Reservation Manager’ window.
12. Enable User Availability Search to view a user’s availability from the Web Sched-
uler calendar.
EMS Software © 2018 / V44.1 / Page 163
CHAPTER 29: Core Configuration - Web Settings
NOTE: (Beta) This setting allows users to search Exchange, via EWS, for
user calendar information.
13. Select Save.
WEB THEME
(Application>Core Configuration>Web Theme)
Utilize the theme color fields to customize the color scheme of the calendar and
types of reservations. (Select colors from a source such as colorpicker.) All col-
ors must be entered in hex format (e.g., #990000).
1. Upload a Logo or Choose File for selection. (Utilize .png files only.) Logos will
appear in the top, left corner of the main page / banner.
2. Customize the Page Header Color.
EMS Software © 2018 / V44.1 / Page 164
CHAPTER 29: Core Configuration - Web Settings
3. Customize the Calendar Color. The calendar color is the cell color of the cal-
endar headers.
4. Customize the Calendar Text Color.
5. Customize the Cell Color (Business Hours).
6. Customize the Cell Color (Non-Business Hours). Business hours are determined
by the current user’s business hours in MP. See User General Settings.
7. Customize the Event Color (default); the body of the reservation on the calendar.
The event color is the default color. Although, the color can also be modified
based on the selection a user makes for Activity Code #1.
EMS Software © 2018 / V44.1 / Page 165
CHAPTER 29: Core Configuration - Web Settings
8. Customize the Event Header Color (Default); the line that borders the top of the
reservation on the calendar. The event header color is the default color. Although,
the color can be modified based on the selection a user makes for Activity Code
#2.
9. Customize the Event Text Color; the body of the reservation on the calendar. The
text color for a displayed reservation.
10. Customize the Restricted Room Color. The default behavior will be changed if
Room Statuses are enabled. In that case, this “cell” will contain the color of the
EMS Software © 2018 / V44.1 / Page 166
CHAPTER 29: Core Configuration - Web Settings
current status, and clicking on the “cell” will open a dropdown to change the
status.
11. Select Save.
EMS Software © 2018 / V44.1 / Page 167
CHAPTER 29: Core Configuration - Web Settings
CHAPTER 30: Core Con-figuration - Universal Schedules(Room Groups)(Application>Core Configuration>Universal Schedules)
Universal Schedules are identife.gd rooms that are grouped together and dis-
played from the calendar for users to reserve from. The purpose of Universal
Schedules is so that groups of rooms can be handpicked to fit the needs of
schedulers (ie. a universal schedule may be created to consist of rooms located
in the west wing of a building. A second schedule may be created and consist of
rooms located on the east wing). This is a way to simplify scheduling and nar-
row down room searches for users.
NOTE: Universal Schedules will be made available to all users accessing the
Web Scheduler and Add in. Users will also be able to create their own “Room
Groups” from their desktop (as described in the Web Scheduler User Guide).
Room Groups created from a desktop are available to individual users ONLY.
EMS Software © 2018 / V44.1 / Page 168
CHAPTER 30: Core Configuration - Universal Schedules (Room Groups)
CREATE UNIVERSAL SCHEDULES (ROOM GROUPS)
1. Select Add Schedule.
2. Title the Universal Schedule group in the Schedule Name field.
3. Select the desired Building from the dropdown field.
Select either:
Desired rooms and Add, or
Add All to select the entire list of rooms.
NOTE: The rooms selected appear in the panel on the right once they have
been added to the new Universal Schedule group.
4. Select Save.
EMS Software © 2018 / V44.1 / Page 169
CHAPTER 30: Core Configuration - Universal Schedules (Room Groups)
CHAPTER 31: Core Con-figuration - Forms Authentication(Application>Core Configuration>Forms Authentication)
The Forms Authentication settings will only affect the Web Scheduler if Forms
Authentication is being used (as setup in IIS) to allow users to login using their
windows credentials without having to connect via VPN.
1. Enable Provide ‘Keep me signed in’ option to allow users to extend their authen-
tication timeout.
2. Select the Authentication Back-end from the dropdown field.
3. Select Save.
EMS Software © 2018 / V44.1 / Page 170
CHAPTER 31: Core Configuration - Forms Authentication
CHAPTER 32: Core Con-figuration – Attachments(Application>Core Configuration>Attachments)
1. Enable File Attachments to allow the addition of attachments.
2. Enable Equipment, Facility, and/or Catering Personnel to identify the personnel
allowed to view the attachments.
3. Enable Reservation Owner Can Restrict Viewing to allow owner to restrict users
from viewing attachment.
4. Identify the Storage Space Allowed on the server.
5. Identify the Maximum Attachment Size allowed. Identify the maximum size for an
attachment.
6. Enter the Storage Directory file address at which the attachments will be stored
(e.g., C:\Temp\Attachment). It is recommended that the temporary directory on the
server is used for attachment storage.)
7. Select Save.
EMS Software © 2018 / V44.1 / Page 171
CHAPTER 32: Core Configuration – Attachments
CHAPTER 33: Core Con-figuration - Outlook Add-in
OUTLOOK ADD-IN
(Application>Core Configuration>Outlook Add-in)
Settings in this section will affect the Outlook Add-in application of MP Only.
NOTE: To immediately view the setting changes to the Add-in, clear the MP
Cache, close, and reopen the MP application.
1. Enable Show Availability Tab to allow the end user to view attendee and room
free/busy time.
EMS Software © 2018 / V44.1 / Page 172
CHAPTER 33: Core Configuration - Outlook Add-in
2. Enable Show Summary Tab to allow end user to view all resource reservations
attached to a reservation.
3. Enable Show User Preferences to Users to allow end users to change their user
preferences from the Add-in. User preference capabilities will allow end users to
customize a limited amount of settings at their desktop only. The Reservation ID
is used as a means to track a reservation.
4. Disable Reservation Date/Time Editing so that such changes are made in
Outlook rather than from the Add-in application.
5. Enable Quick Reserve to allow the user to search between multiple rooms and
create reservations from the ‘Availability’ window.
6. Enable Include Res ID in Appointment Body if desired.
7. Enable Show Subject on Room Group Schedule if desired.
8. Enable Delete Reservation Without User Prompt if desired. We recommend dis-
abling this feature until users become familiar with MP.
9. Enable Allow Users to Modify Reservations with Restricted Resources if desired.
If enabled, users can edit the approved restricted room reservation without having
to get a second approval.
10. Enable Ignore Connection Failures. We recommend enabling this feature if you
are moving around within the office and are getting connection failure messages.
This feature does not function off-site.
11. Customize Meeting Planner Option Button Caption if desired.
12. Customize Summary Tab if desired.
EMS Software © 2018 / V44.1 / Page 173
CHAPTER 33: Core Configuration - Outlook Add-in
13. Customize the Availability Tab Caption if desired.
14. Customize Cost Center Label if desired.
EMS Software © 2018 / V44.1 / Page 174
CHAPTER 33: Core Configuration - Outlook Add-in
15. Customize Electroplating Reservation Button Caption if desired (e.g., Company
Name).
EMS Software © 2018 / V44.1 / Page 175
CHAPTER 33: Core Configuration - Outlook Add-in
16. Remind user of reservation within an identified number of (days). Enter "0" to dis-
able this feature.
17. Select Save.
OUTLOOK ADD-IN: VISITORS
(Application>Core Configuration>Outlook Add-in: Visitors)
1. Enable Visitor Tab to capture additional information. The visitor tab can be
renamed (#3 below) and the field can be used to collect additional data.
2. Enable Email Field Mandatory in Visitor Tab to force the user to include contact
information in order to complete the reservation. The used and required field from
Rooms: Custom Fields must be enabled. No default should be entered or custom
label in order for the functionality of this feature to carryout in the Add-in.
3. Customize the Visitor Tab Caption if desired.
4. Select Save.
OUTLOOK ADD-IN: TELECONFERENCING
(Application>Core Configuration>Outlook Add-in: Teleconferencing)
EMS Software © 2018 / V44.1 / Page 176
CHAPTER 33: Core Configuration - Outlook Add-in
1. Enable Teleconferencing if applicable.
2. Enable Show Conference Code and leader PIN in Email Subject if desired.
3. Customize the Teleconference Tab Caption.
4. Select Save.
CLEAR MEETING PLANNER CACHE
Clear Meeting Planner Cache to view immediate changes when an Add-in
application setting has been changed.
1. Select User Preferences from the top right corner of your Outlook calendar
homepage.
2. Enable Clear Meeting Planner Cache.
3. Select Save & Close.
4. Close and reopen Outlook to see immediate setting changes.
EMS Software © 2018 / V44.1 / Page 177
CHAPTER 33: Core Configuration - Outlook Add-in
CHAPTER 34: Meeting PlannerUser GuideMeetingPlanner simplifies room and resource scheduling with its interactive
interface. It is used in conjunction with Microsoft Outlook/Exchange as a stand-
alone application and with MeetingPlanner Web Scheduler. It allows users to
reserve rooms, catering, equipment, setup, videoconferencing and more. Noti-
fications for reservation requests are automatically generated to facility support
crews, and meetings synch to Microsoft Outlook and all other MeetingPlanner
applications (ie. Web Scheduler, FloorPlanner, Digital Signs and Software).
EMS Software © 2018 / V44.1 / Page 178
CHAPTER 34: Meeting Planner User Guide
CHAPTER 35: QuickReserve/FeaturesUse “Quick Reserve” to reserve catering or equipment without a room. The fea-
ture is a short-cut to the ‘MeetingPlanner for Outlook’ room and resource reser-
vation window as well.
OTHER FEATURESThe Pending Request feature allows designated room owners to deny or accept
rooms requested by end users
Enter room name and search from the ‘MeetingPlanner for Outlook’ reservation
window to quickly find a room
Manage to add resources to a reservation or for a summary of all resources
attached to a reservation
Down button to select the reservation to modify when multiple rooms and/or
resources are reserved
X to delete an entire reservation (to include the room and all resources)
EMS Software © 2018 / V44.1 / Page 179
CHAPTER 35: Quick Reserve/Features
Load Recent to populate the search parameter data entered from the last reser-
vation created
Reset to clear the search parameter data entered
Search from the ‘Manage’ window of an existing reservation to view and reserve
additional available rooms
Cancel to release a resource reservation at any time. (Subject, date, and time will
remain populated.)
Color Coding
Once a reservation is created, the color of the reservation window will change
depending on the resource reserved:
Room reservations are green
Equipment reservation are purple
Catering reservation are orange
EMS Software © 2018 / V44.1 / Page 180
CHAPTER 35: Quick Reserve/Features
CHAPTER 36: Create A Meeting
CREATEMEETING IN MICROSOFT OUTLOOK
Create a meeting from the Outlook Calendar to include:
Meeting date/time
Drag and drop meeting dates and times in Outlook to modify a reservation.
MeetingPlanner will automatically update.
Subject
Attendees
Use Scheduling Assistant in Outlook to view attendee availability.
A recurring pattern
Notes
Note: Leave the Location field blank; once a room is reserved using Meet-
ingPlanner, the field will automatically populate with the location information.
EMS Software © 2018 / V44.1 / Page 181
CHAPTER 36: Create A Meeting
ACCESS AND VIEW
Open MeetingPlanner by launching theNew Reservation tool from the
Outlook Calendar.
ROOMSEARCH PARAMETERS
MeetingPlanner allows users to search for rooms according to Hierarchy, Num-
ber of Attendees, In-Room Equipment (fixed equipment), and Work Requests
(room setup, ie: videoconferencing).
Note: At a glance, the green bar (in each room window) is a visual indicator of
the amount of attributes available in response to the data entered in the
search parameters.
SELECT HIERARCHY LOCATION FROM ‘SEARCH’ WINDOW
1. Enable the desired hierarchy location from the ‘Search’ window.
Click on the arrows, next to each location, to narrow the search and view
the hierarchy tree.
EMS Software © 2018 / V44.1 / Page 182
CHAPTER 36: Create A Meeting
ENTER THE NUMBER OF ATTENDEES
2. Enter the Number of Attendees to include in the room search if the number
exceeds the attendees invited from Outlook.
MeetingPlanner will default the number of attendees invited from Outlook
+1 to include the reservation owner. A different number of attendees can
be entered from the MeetingPlanner application. Any room capacity con-
flicts will be indicated in red text in the ‘Room’ window but will not prevent a
user from reserving the room.
SELECT IN-ROOMEQUIPMENT
3. Use the scroll bar and next to the desired in-room equipment to include in the
room search.
In-room equipment that is not available is indicated in red text in the
‘Room’ window. Such equipment can be requested as portable equipment
using the equipment tab in the identified room.
SELECTWORK REQUEST
1. Use the scroll bar and next to the desired setup (ie. conference, u-shape, video-
conference) to include in the room search.
EMS Software © 2018 / V44.1 / Page 183
CHAPTER 36: Create A Meeting
Setup that is not available is indicated in red text. Alternate setup options
(if available) can be requested using the setup or VC tab in the ‘Room’ win-
dow.
Reservation Window
Note: If multiple setups are selected from the ‘Work Request’ window,
MeetingPlanner may return rooms with multiple setup options. Once
EMS Software © 2018 / V44.1 / Page 184
CHAPTER 36: Create A Meeting
reserved, MeetingPlanner will automatically default the setup according
to its order in the setup list.
Example of ‘Work Requests’ list and search
If both conference and square are selected as a search parameter and are
available in the room, MeetingPlanner will assign the conference room
setup to the reservation because it is ordered before square in the list of
options
VIEW AVAILABLE ROOMS
Once all search parameter data is entered, use the scroll bar on the right side of
the ‘Reservation’ window to view the available rooms.
EMS Software © 2018 / V44.1 / Page 185
CHAPTER 36: Create A Meeting
View room description by clicking on any of the room names. Reservations can
be made from the ‘Room Description’ window as well.
ROOMDESCRIPTION
SETUP AND VC TABS
Setup and Videoconferencing can also be added to the reservation using the
associated tabs from the ‘Room’ window. The tabs must be used prior to
reserving the room in order to make such arrangements.
EMS Software © 2018 / V44.1 / Page 186
CHAPTER 36: Create A Meeting
ADD SETUP USING TAB
1. Select the Setup tab and view the available setup types.
The setup tab only appears if setup is available in the chosen room. Setup
must be chosen before reserving the room.
2. Highlight to select the desired setup type.
Note: Organizations may identify setup reservation cut-off hours before
a meeting. Users will not be able to reserve meetings with setup within
the set cut-off time.
3. Enter any additional instructions for setup support crews in the Notes box.
EMS Software © 2018 / V44.1 / Page 187
CHAPTER 36: Create A Meeting
4. Select OK.
Note: Once setup is selected from the Setup tab in the ‘Room’ window,
the room will automatically be reserved as well.
Note: MeetingPlanner automatically generates a notification to support
setup crews and the reservation owner indicating the meeting room,
time, date, and setup request.
Note: Typically, organizations attach buffer times to both ends of a
meeting with setup. Reservation buffer times will be viewed from the
‘Request a Setup’ window, ‘Room Reservation’ window, and in other
MeetingPlanner applications.
REQUEST A SETUP WINDOW ROOMRESERVATION
WINDOW
1. Select VC tab. The videoconference tab is viewable from the ‘Room’ window
when a room includes videoconference capabilities.
EMS Software © 2018 / V44.1 / Page 188
CHAPTER 36: Create A Meeting
2. Select the rooms to include in the videoconference reservation and Reserve.
3. Highlight to select the room to include in the videoconferencing reservation and
select OK.
4. Include additional Instructions if desired.
EMS Software © 2018 / V44.1 / Page 189
CHAPTER 36: Create A Meeting
5. Select Save & Close.
Note: Once Videoconferencing is selected from the VC tab in the ‘Room’ win-
dow, the room will automatically be reserved as well.
Note: MeetingPlanner automatically generates a notification to support setup
crews and the reservation owner indicating the meeting room, time, date, and
videoconferencing request.
COMPLETE RESERVATION
Once the room to reserve is identified:
1. Verify the meeting Subjectand date/time fields in the ‘Reservation’ window and
Reserve. Once reserved, the room status color will change to green.
EMS Software © 2018 / V44.1 / Page 190
CHAPTER 36: Create A Meeting
2. Select Save & Close from both MeetingPlanner and Outlook applications.
If attendees are invited, Send the notification email through Outlook.
Important: Facility support work requests are automatically generated
through MeetingPlanner.
Note: Meetings cannot be made in the past unless the user has access
(security permissions).
Note: Meetings created in MeetingPlanner automatically synchronize to
Outlook/Exchange and all other MeetingPlanner applications.
EMS Software © 2018 / V44.1 / Page 191
CHAPTER 36: Create A Meeting
DELEGATE RESERVATIONS
Delegate reservations can be created by users with access to other users
Outlook Calendar.
EMS Software © 2018 / V44.1 / Page 192
CHAPTER 36: Create A Meeting
CHAPTER 37: Meeting ConflictsUsers are unable to create reservations that conflict; MeetingPlanner will return
alternate available rooms at the desired time/date when a conflict occurs.
Important: If a conflict occurs and a user selects cancel instead of an altern-
ate room from the ‘Resolve Conflict’ window, the meeting time and date will
be saved without a room.
EMS Software © 2018 / V44.1 / Page 193
CHAPTER 37: Meeting Conflicts
CHAPTER 38: Add Resources
ADD CATERING
1. Select Manage.
2. Select add caterer.
3. Select next to: Show all, Internal, or External to display desired catering vendor.
View menu and additional catering information by selecting the vendor’s name.
INTERNAL
4. Select Pickup or Delivery.
5. Use the scroll bar from the ‘Catering Order’ window to view all of the food cat-
egories and menu items. Select next to food categories to collapse and hide.
6. Click and drag the cursor over the “0” next to the desired catering item(s) and enter
the quantity of menu items needed. Include additional instructions to catering sup-
port crew when internal caterer is selected.
7. Select OK.
8. Select the delivery destination from the ‘Choose a Destination for Delivery’ win-
dow. Select OK to choose default delivery room or create a new reservation to use
for delivery. If more than one room is reserved, highlight and select the room at
EMS Software © 2018 / V44.1 / Page 194
CHAPTER 38: Add Resources
which the order should be delivered.
9. Select Save & Close.
Note: Once catering is selected from the Catering tab, the room will auto-
matically be reserved as well.
Note: Organizations may identify catering reservation cut-off hours before a
meeting. Users will not be able to reserve catering within the set cut-off time.
Note: Delivery time automatically defaults to the meeting start time.
Note: Meeting Planner generates a notification to catering support crews and
the reservation owner indicating the meeting room, delivery time, date, and
catering order.
INTERNAL CATERING ORDER TRACKING NUMBER
Once an internal catering order has been created, a unique tracking order num-
ber is assigned. Tracking numbers may be useful to identify a particular order
EMS Software © 2018 / V44.1 / Page 195
CHAPTER 38: Add Resources
and for reporting purposes.
To view the catering tracking number:
1. Select Manage.
2. Select the catering order.
3. View the tracking number.
EXTERNAL
User launches into external catering website.
Note: External catering must be arranged by contacting the external vendor.
EMS Software © 2018 / V44.1 / Page 196
CHAPTER 38: Add Resources
ADD EQUIPMENT
1. Select Manage.
2. Select add equipment.
3. Use the scroll bar on the right side of the ‘Reservation’ window for the full list of
available portable equipment. View equipment description by clicking on the port-
able equipment name.
4. Select Reserve (to check-in/out equipment) or Delivery next to the desired port-
able equipment.
5. Include additional Notes (if desired) to facility support crew when Delivery option
is selected.
6. Select Save & Close.
Note: Organizations may identify portable equipment reservation cut-off hours
before a meeting. Users will not be able to reserve meetings with portable
equipment within the set cut-off time.
Note: Meeting Planner automatically generates a notification to equipment
support crews and the reservation owner indicating the meeting room, time,
date, and portable equipment reservation order.
EMS Software © 2018 / V44.1 / Page 197
CHAPTER 38: Add Resources
Note: Typically, organizations attach buffer times to both ends of a meeting
that includes portable equipment reservation. Reservation buffer times will be
viewed in the equipment description of Meeting Planner and other MP applic-
ations.
ADD ROOM
1. Select Manage.
2. Select add room .
3. Enter search parameter criteria.
4. Use the scroll bar on the right side of the ‘Reservation’ window and Reserve the
desired room to add to the reservation. Add room setup, equipment, catering, etc.,
reservation to attach to the added room.
5. Select Save & Close.
EMS Software © 2018 / V44.1 / Page 198
CHAPTER 38: Add Resources
CHAPTER 39: Edit Meeting andResources
EDIT MEETING
1. Select the meeting to edit from the Outlook Calendar.
2. Launch the Meeting Planner tool to open the existing meeting.
Note: If more than one room or resource is attached to the reservation,
use the arrow next to the resource to edit and open the reservation.
3. Edit any of the following Save & Close:
Subject
Day, month, date, year, and/or time of meeting and Commit Date to save
changes.
Highlight and select day, month, date, year, and time. Use first set of
arrows to make edits. Second arrow can also be used to open the cal-
endar and make modifications.
Catering
EMS Software © 2018 / V44.1 / Page 199
CHAPTER 39: Edit Meeting and Resources
Equipment Delivery
Setup Instructions
Note: Meetings from the past cannot be edited in Meeting Planner unless the
user has access (security permissions).
Note: Meeting Planner automatically generates an email notification with
updated date, time, and locations information to attendees. The user has the
option to Send the notification or Close (not send notification). Support facility
crews and the reservation owner will receive emails notifications when meet-
ings are modified as well.
Note: Edits made to meetings automatically synchronize to Outlook/Ex-
change and all MP applications.
EDIT RESOURCES
EMS Software © 2018 / V44.1 / Page 200
CHAPTER 39: Edit Meeting and Resources
EDIT CATERING
1. Select the reservation associated with the catering order to edit from the Outlook
Calendar.
2. Launch the Meeting Planner tool to open the existing meeting with catering.
3. Select the vendor name from the ‘Caterer’ window to edit.
4. Select Edit Order and add or remove from the catering order.
5. Select and highlight the delivery room destination
—or—
‘Create a New Reservation’ at which to deliver the catering order and
Reserve.
EMS Software © 2018 / V44.1 / Page 201
CHAPTER 39: Edit Meeting and Resources
6. Select Save & Close.
Note: Catering delivery orders can be reassigned to a new room if the current
room reservation is canceled or modified ONLY.
Note: Meeting Planner generates a notification to the reservation owner and
catering crew indicating all modifications made to the catering order.
EMS Software © 2018 / V44.1 / Page 202
CHAPTER 39: Edit Meeting and Resources
EDIT EQUIPMENT DELIVERY LOCATION
Note: Meeting Planner automatically generates a notification to the reser-
vation owner and equipment support crews indicating the new portable deliv-
ery location.
1. Select the reservation associated with the portable equipment reservation to edit
from the Outlook Calendar.
2. Launch the Meeting Planner tool to open the existing meeting with portable equip-
ment.
3. Select the desired portable equipment reservation to change the delivery location.
4. Select Edit Delivery.
5. Select the new delivery location and OK.
EDIT SETUP AND VIDEOCONFERENCING
1. Select the reservation with setup or videoconferencing to edit from the Outlook Cal-
endar.
2. Launch the Meeting Planner tool to open the existing meeting with setup or video-
conference.
3. Select the applicable room name (with setup/videoconfernecing attached) from the
‘Room’ window to edit.
EMS Software © 2018 / V44.1 / Page 203
CHAPTER 39: Edit Meeting and Resources
4. Select Edit Setup or Edit Videoconferencing.
5. Edit Setup Instructions or Edit Videoconferencing.
To edit videoconferencing, add another room to include in the videoconference,
or delete and replace an existing room.
Note: If the room in which the original videoconference reservation was cre-
ated is deleted, the videoconference reservation will be lost.
6. Select OK and Save & Close.
EMS Software © 2018 / V44.1 / Page 204
CHAPTER 39: Edit Meeting and Resources
Note: Meeting Planner generates a notification to the reservation owner and
facility support crew indicating all modifications made to the setup.
EMS Software © 2018 / V44.1 / Page 205
CHAPTER 39: Edit Meeting and Resources
CHAPTER 40: Create a Recur-ring MeetingThe recurrence pattern of a meeting cannot be changed once the reservation
has been created. If the recurrence pattern needs to be changed, delete the
entire reservation and create a new recurring meeting series.
The recurrence pattern of a meeting is created in Microsoft Outlook. The recur-
ring pattern will be viewed in the ‘MeetingPlanner for Outlook’ reservation win-
dow. All resources are reserved with the recurring series through Meeting
Planner.
1. Create a recurring meeting in Outlook.
2. Launch the Meeting Planner tool.
3. Enter search parameter criteria and Reserve room.
4. Reserve additional resource reservations to attach to the entire recurring meeting
as desired.
5. Select Save & Close.
ADD ROOM TO SINGLE OCCURRENCE OFRECURRING
MEETING SERIES
1. Select the desired recurring meeting from the Outlook Calendar.
2. Enable just this one and OK.
EMS Software © 2018 / V44.1 / Page 206
CHAPTER 40: Create a Recurring Meeting
3. Launch the Meeting Planner tool to open the single occurrence.
4. Select Add room.
5. Enter search parameter criteria and Reserve room.
6. Reserve additional resource reservations to attach to the meeting as desired.
7. Select Save & Close.
ADD ROOM TO ENTIRE RECURRING SERIES
1. Select any one of the occurrence dates from the series.
2. Enable the entire series and OK.
3. Launch the Meeting Planner tool to open the entire series.
4. Select Add room.
5. Enter search parameter criteria and Reserve room.
EMS Software © 2018 / V44.1 / Page 207
CHAPTER 40: Create a Recurring Meeting
6. Reserve additional resource reservations to attach to the series as desired.
7. Select Save & Close.
EMS Software © 2018 / V44.1 / Page 208
CHAPTER 40: Create a Recurring Meeting
CHAPTER 41: Delete Meet-ing/Resources
DELETEMEETING (AND ALL RESOURCE
RESERVATIONS ATTACHED)
1. Select the meeting to delete from the Outlook Calendar.
2. Launch the Meeting Planner tool to open the existing meeting.
3. Select the Delete button from ‘Manage’ window to delete the entire reservation (to
include the room and all resources).
EMS Software © 2018 / V44.1 / Page 209
CHAPTER 41: Delete Meeting/Resources
IMPORTANT: Although all resources are deleted from Meeting Planner
application, the meeting time and date will remain reserved on the Outlook
Calendar. Manually delete the time/date reservation from Outlook.
NOTE: Meetings deleted in Meeting Planner and the Outlook Calendar are
automatically deleted in all MP applications.
DELETE RESOURCES
EMS Software © 2018 / V44.1 / Page 210
CHAPTER 41: Delete Meeting/Resources
DELETE INDIVIDUAL RESERVED RESOURCES (E.G.,
ROOM, CATERING, OR EQUIPMENT)
1. Select the meeting, from the Outlook Calendar, that is attached to the resource to
delete.
2. Launch the Meeting Planner tool to open the existing meeting.
3. Select the resource to delete and open and view the reservation.
4. Select the Delete button from the top right corner of the window to delete the
resource.
EMS Software © 2018 / V44.1 / Page 211
CHAPTER 41: Delete Meeting/Resources
5. Select the Checkmark to confirm the deletion. Select Delete button to save the
resource reservation and return back to the ‘Manage’ window.
NOTE: Resource reservations that are assigned to a room must be reas-
signed if the room reservation is released.
NOTE: Reservations deleted in Meeting Planner are automatically deleted in
all MP applications.
EMS Software © 2018 / V44.1 / Page 212
CHAPTER 41: Delete Meeting/Resources
CHAPTER 42: Edit and DeleteRecurring Meeting
EDIT RECURRINGMEETING
Once the recurring meeting room is reserved, edits can be made to individual
meeting dates or the entire recurring series.
1. Select the recurring meeting, from the Outlook Calendar to edit.
2. Launch the Meeting Planner tool to open the meetings.
3. Select Just this one button or the entire series of the recurring reservation and OK.
4. Select, open, and view the date(s) from the series to edit. Select Expand All to view
all meetings in the series.
EMS Software © 2018 / V44.1 / Page 213
CHAPTER 42: Edit and Delete Recurring Meeting
5. Add or remove caterer, equipment, and/or room.
NOTE: Edits made to recurring meetings in Meeting Planner are auto-
matically updated in all MP applications.
EMS Software © 2018 / V44.1 / Page 214
CHAPTER 42: Edit and Delete Recurring Meeting
NOTE: Edits made to the single occurrence of a meeting (e.g., a time change)
will be viewed in the single meeting reservation window ONLY.
DELETE SINGLE OCCURRENCEOF RECURRING
MEETING
1. Select the single occurrence of a recurring meeting to delete from the Outlook Cal-
endar,
—or—
select any one of the recurring dates in the series.
2. Launch the Meeting Planner tool to open the meeting.
3. Select the Delete button from the room window to delete the reservation.
4. Select the Checkmark to confirm the deletion.
IMPORTANT: Although the room reservation is deleted from the Meeting
Planner application, the meeting time and date will remain reserved on the
Outlook Calendar. Manually delete the time/date reservation from Outlook.
EMS Software © 2018 / V44.1 / Page 215
CHAPTER 42: Edit and Delete Recurring Meeting
NOTE: Single occurrence meetings deleted in Meeting Planner are auto-
matically deleted in all MP applications.
DELETE ENTIRE RECURRINGMEETING SERIES
1. Select the entire series of a recurring meeting to delete from the Outlook Calendar.
2. Launch the Meeting Planner tool to open the meeting.
3. Select the Delete button from the reservation window to delete the entire reser-
vation.
4. Select the Checkmark to confirm the deletion.
NOTE: Meetings deleted in Meeting Planner are automatically deleted in all
MP applications.
IMPORTANT: Although the entire series of a recurring reservation is deleted
from the Meeting Planner application, the meeting time and date will remain
reserved on the Outlook Calendar. Manually delete the time/date of the recur-
ring reservation from Outlook.
EMS Software © 2018 / V44.1 / Page 216
CHAPTER 42: Edit and Delete Recurring Meeting
CHAPTER 43: Quick Reference
INTRODUCTION
Meeting Planner simplifies room and resource scheduling with its interactive
interface. It is used in conjunction with Microsoft Outlook/Exchange as a stand-
alone application and with Meeting Planner Web Scheduler. It allows users to
reserve rooms, catering, equipment, setup, videoconferencing and more. Noti-
fications for reservation requests are automatically generated to facility support
crews, and meetings synch to Microsoft Outlook and all other Meeting Planner
applications (i.e., Web Scheduler, Floor Planner, Room Signs and Software).
CREATE MEETING IN MICROSOFT OUTLOOK
Create a meeting from the Outlook Calendar to include:
Meeting date/time
Subject
Attendees
A recurring pattern
Notes
EMS Software © 2018 / V44.1 / Page 217
CHAPTER 43: Quick Reference
ACCESS AND VIEW
Open Meeting Planner by launching theNew Reservation tool from the
Outlook calendar.
QUICK RESERVE
Use “Quick Reserve” to reserve an individual resource (catering, equipment).
The feature is a short-cut to the ‘Room’ reservation window as well.
ROOM SEARCH PARAMETERS
Meeting Planner allows users to search for rooms according to Hierarchy, Num-
ber of Attendees, In-Room Equipment (fixed equipment), and Work Requests
(room setup).
EMS Software © 2018 / V44.1 / Page 218
CHAPTER 43: Quick Reference
SELECT HIERARCHY LOCATION FROM SEARCHWINDOW
1. Enable check the desired hierarchy location from the ‘Search’ window. Click on
the arrows, next to each location, to narrow the search and view the hierarchy tree.
ENTER THE NUMBEROF ATTENDEES
2. Enter the Number of Attendees to include in the room search if the number
exceeds the attendees invited from Outlook.
NOTE: Meeting Planner will default the number of attendees invited from
Outlook +1 to include the reservation owner. A different number of attendees
can be entered from the Meeting Planner application. Any room capacity con-
flicts will be indicated in red text in the ‘Room’ window.
SELECT IN-ROOM EQUIPMENT
3. Use the scroll bar and check next to the desired in-room equipment to include in
the room search. In-room equipment that is not available is indicated in red text in
the ‘Room’ window. Such equipment (if available) can be requested as portable
equipment using the equipment tab in the identified room.
EMS Software © 2018 / V44.1 / Page 219
CHAPTER 43: Quick Reference
SELECTWORK REQUEST
4. Use the scroll bar and check next to the desired setup (ie. conference, u-shape,
videoconference) to include in the room search. If setup is not available, it is indic-
ated in red text in the ‘Room’ window. Alternate setup options or rooms with video-
conferencing capabilities can be requested using the setup and VC tabs from the
‘Room’ window.
MAKE ROOM SELECTION
Once all search parameter data is entered, use the scroll bar on the right side of
the ‘Reservation’ window to view the available rooms.
View room description by clicking on any of the room names. Reservations can
be made from the ‘Room Description’ window as well.
EMS Software © 2018 / V44.1 / Page 220
CHAPTER 43: Quick Reference
NOTE: At a glance, the green bar (in each room window) is a visual indicator
of the amount of attributes available in response to the search parameters
entered.
SETUP AND VC TABS
Setup and Videoconferencing can also be added to the reservation using the
associated tabs from the ‘Room’ window. The tabs must be used prior to
reserving the room in order to make such arrangements.
COMPLETE A RESERVATION
Once the room to reserve is identified:
1. Verify the meeting Subject and date/time fields in the ‘MeetingPlanner for Outlook’
window and Reserve. Once reserved, the room status color will change to green.
2. Select Save & Close from both Meeting Planner and Outlook applications.
3. If attendees are invited, Send the notification from Outlook.
ADD RESOURCES
Once a room is reserved, add catering, portable equipment, and additional
rooms as desired.
EMS Software © 2018 / V44.1 / Page 221
CHAPTER 43: Quick Reference
ADD CATERING
1. Select Manage.
2. Select Add caterer.
3. Select button next to: Show all, Internal, or External to display desired catering
vendor. View menu and additional catering information by selecting the vendor’s
name.
4. Select Pickup or Delivery.
5. Use the scroll bar from the ‘Catering Order’ window to view all of the food cat-
egories and menu items.
6. Click and drag the cursor over the “0” next to the desired catering item(s) and enter
the quantity of menu items needed. Include additional Instructions to catering sup-
port crew when internal caterer is selected.
7. Select OK.
8. Select the delivery destination from the ‘Choose a Destination for Delivery’ win-
dow. Select OK to choose the default delivery room or create a new room reser-
vation to use for delivery.
9. Save & Close.
ADD EQUIPMENT
1. Select Manage.
2. Select Add equipment.
3. Use the scroll bar on the right side of the ‘Portable Equipment’ window for a full list
of available portable equipment. View equipment description by clicking on the
portable equipment name.
EMS Software © 2018 / V44.1 / Page 222
CHAPTER 43: Quick Reference
4. Select Reserve (to check-in/out equipment) or Delivery next to the desired portable
equipment. Include additional Instructions (if desired) to facility support crew when
Delivery option is selected.
5. Select Save & Close.
ADD ROOM
1. Select Manage.
2. Select Add room.
3. Use the scroll bar on the right side of the ‘Room’ window and Reserve the desired
room to add to the reservation.
4. Select Save & Close.
CREATE RECURRING MEETINGS
The recurrence pattern of a meeting is created in Microsoft Outlook. All
resources are reserved with the recurring series through Meeting Planner.
IMPORTANT: The recurrence pattern of a meeting cannot be changed once
the reservation has been created.
EDIT MEETING
1. Select the existing meeting to edit from the Outlook Calendar and launch the Meet-
ing Planner tool.
EMS Software © 2018 / V44.1 / Page 223
CHAPTER 43: Quick Reference
NOTE: If more than one room or resource is attached to the reservation, use
the arrows to identify the (applicable) resource.
2. Edit any of the following Save & Close:
Subject, day, month, date, year, and/or time of meeting and Commit Date to save
changes
Catering using Edit Order and OK to save changes
Equipment Delivery location and Instructions using Edit Delivery and OK to save
changes
Setup Instructions using Edit Setup and OK to save changes
DELETE MEETING AND/OR RESOURCES
1. Select the meeting to delete from the Outlook Calendar and launch the Meeting
Planner tool.
2. Select the X to delete the reservation from the ‘Manage’ window. If more than one
resource is attached to the reservation, select to identify the applicable resource, X
to delete, check to Confirm Deletion.
EMS Software © 2018 / V44.1 / Page 224
CHAPTER 43: Quick Reference
CHAPTER 44: Top Meeting Plan-ner Issues (and How to Fix Them)1. Changing room booked in Web Scheduler removes Outlook appointment instead
of updating to new room location
a. Users should be booking the new room first, and only then deleting the ori-
ginal room.
2. Customer reports blank white screen when booking in the Web Scheduler
a. Get the Web.log file from the app server, in C:/Temp/MeetingPlannerLogs
3. Email notifications are not sending. (If they report that the keywords are not ren-
dering correctly, despite having confirmed that the keyword is accurate according
to the available keywords for the template in question, then… we know. Times are
also off for some of them.)
4. What systems do you work on?
a. YES
i. 32-bit Outlook 2010
ii. 32-bit Outlook 2013
iii. Exchange 2013
iv. Exchange 2010
v. Office 365 (Hosted Exchange)
vi. Chrome
b. NO
i. 64-bit Outlook (any year)
ii. Exchange 2007
EMS Software © 2018 / V44.1 / Page 225
CHAPTER 44: Top Meeting Planner Issues (and How to Fix Them)
iii. Outlook Web App (incl. accessing Outlook 365 email via the Web Inter-
face)
iv. Internet Explorer (Web Scheduler doesn’t work at all in IE8)
v. Firefox
EMS Software © 2018 / V44.1 / Page 226
CHAPTER 44: Top Meeting Planner Issues (and How to Fix Them)
CHAPTER 45: Introduction toWeb SchedulerMeetingPlanner Web Scheduler simplifies room and resource scheduling with
its interactive interface. It allows users to reserve rooms, equipment, catering,
videoconferencing and setup, and automatically generates notifications for
such requests. Web Scheduler can be used as a stand-alone application or in
conjunction with Outlook/Exchange and other MeetingPlanner applications.
EMS Software © 2018 / V44.1 / Page 227
CHAPTER 45: Introduction to Web Scheduler
CHAPTER 46: Installing WebScheduler
COMPATIBLEWITH...All modern browsers (IE11 or above, Chrome, Safari, mobile browsers, etc.)
MeetingPlanner v5.5.1.45 or above
PREREQUISITESWindows Server 2008/R2 and newer
IIS6 or newer
Message Queuing Services (MSMQ)
.NET 4.0
IIS6 VS IIS7 DEVELOPER NOTE:
A custom HTTP module and HTTP handler are packaged along with the web
application that offer compression or dynamic resources, combinative dynamic
resource sources, and explicit caching control of all dynamic resources, all res-
ulting in increased performance. The module and handler will be functional in all
versions of IIS. All other optimizations found in the application only be functional
within IIS7 (or above) deployments..
EMS Software © 2018 / V44.1 / Page 228
CHAPTER 46: Installing Web Scheduler
UPGRADE
For those who already have the Web Scheduler installed and are looking to
upgrade, simply uninstall the program (Start > Control Panel > Add/Remove
Programs) and follow the installation instructions below. At this time, we are not
producing .msp patch files for the Web Scheduler.
INSTALLATION
QUICK REFERENCE
1. From the application, run the .msi file.
2. Walk through the installation wizard.
3. Once the installation is complete, please open the ...\ Emergingsoft \ Scheduler \
Web.config
4. Save and Close.
5. If you are running the Web Scheduler with IIS6, and you are already running Meet-
ingPlanner, you will need to move the Scheduler application from the Default Web
Site to an alternate web site. This is because both applications use different .NET
frameworks and, in IIS6, these cannot be hosted in the same web site.
EMS Software © 2018 / V44.1 / Page 229
CHAPTER 46: Installing Web Scheduler
CHAPTER 47: ConfigureASP.NET State for Load Bal-anced Environments
INTRODUCTION
Larger organizations may be looking to host the Web Scheduler on multiple
servers in order to distribute network traffic and enhance performance. The gen-
eral setup in these cases would consist of a piece of hardware (or software in
some cases) that acts as the load balancer. This tool will provide a unified front
for multiple servers, allowing users to connect through itself and be routed to
one of the web servers. The web servers will all have the Web Scheduler
installed on them, but will need to save each user's session information on the
same server, the "State Server". This allows the user's session information to
always be available as the load balancer routes the user to a different server.
Below, you will find the steps needed to properly configure the Web Scheduler
in this setup.
NOTE: Web Scheduler v1.8.2.0 or above is required.
EMS Software © 2018 / V44.1 / Page 230
CHAPTER 47: Configure ASP.NET State for Load Balanced Environments
CONFIGURATION
STATE SERVER SETUP (INBOUND PORTS REQUIRED: 80 &
42424)
Below are the configuration steps for the server that will be designated to hold
all of the session state information for all users
GENERATE A NEWMACHINE KEY
1. Perform a web search for "machine key generator"
2. Click on one of the first few links (ie http://aspnetresources.com/tools/machineKey)
3. Generate a new machine key (this will be used shortly)
UPDATE THEWEB SCHEDULERWEBWEB.CONFIG
1. Open C:\Program Files\Emergingsoft\Scheduler\web.config.
2. Add a <sessionState> element within <system.web> as seen below.
3. Save and close (example below).
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<appSettings>
...
EMS Software © 2018 / V44.1 / Page 231
CHAPTER 47: Configure ASP.NET State for Load Balanced Environments
</appSettings>
<system.web>
...
<sessionState mode="StateServer" stateCon-
nectionString="tcpip=127.0.0.1:42424" />
...
</system.web>
</configuration>
MODIFY THE REGISTRY
1. Open regedit.
2. Navigate to the following key: HKLM\System\Current Control Set\Services\aspnet_
state\Parameters\AllowRemoteConnection.
3. Set this value to 1.
4. Close regedit.
EMS Software © 2018 / V44.1 / Page 232
CHAPTER 47: Configure ASP.NET State for Load Balanced Environments
START THE ASP.NET STATE SERVICE
1. Open Start > Administrative Tools > Services
2. Right-click the ASP.NET State Service (if the service doesn't exist you will need to
run the 'aspnet_regiis.exe -i' command)
3. Select "Automatic" startup type
4. Click Apply
5. Start the service
6. Click OK
WEB SERVER(S) SETUP (OUTBOUND PORTS REQUIRED:
80 & 42424)
Below are the configuration steps for all of the web servers that will run Meet-
ingPlanner, but will not hold session state information
UPDATE THEWEB SCHEDULERWEBWEB.CONFIG
1. Open C:\Program Files\Emergingsoft\Scheduler\web.config
2. Add a <sessionState> element within <system.web> as seen below (note the
stateConnectionString)
3. Save and close (example below)
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
EMS Software © 2018 / V44.1 / Page 233
CHAPTER 47: Configure ASP.NET State for Load Balanced Environments
<appSettings>
...
</appSettings>
<system.web>
...
<sessionState mode="StateServer" stateCon-
nectionString="mystateserver.emergingsoft.com:42424" ...
/>
...
</system.web>
</configuration>
VALIDATE THE CONFIGURATION
In order to test this functionality, you will want to access the Web Scheduler at
each of the web servers, from your local desktop. Make sure that you bypass
EMS Software © 2018 / V44.1 / Page 234
CHAPTER 47: Configure ASP.NET State for Load Balanced Environments
your load balancing system and access the Web Scheduler directly on each
server (http://mystateserver.emergingsoft.com/scheduler, http://my-
webserver1.emergingsoft.com/scheduler...).
EMS Software © 2018 / V44.1 / Page 235
CHAPTER 47: Configure ASP.NET State for Load Balanced Environments
CHAPTER 48: Configure Redir-ect From Old URL
INTRODUCTION
v5.5.5.13 was the final MeetingPlanner version where the Web Scheduler was
accessible via the /scheduler URL. In all subsequent versions, the web com-
ponents were combined under the /suite application. If users are used to going
to the old Web Scheduler URL, setting up a redirect can be done to prevent
them from needing to update their bookmarks.
NOTE: While the following steps layout how to redirect the user from /sched-
uler to /suite, the same steps can be followed if you are looking to transition
users out of the old MP Web toolset (/meetingplanner).
HOW TO:
1. Create a "Scheduler" folder in the C:\Program Files (x86)\Emergingsoft folder on
the application server.
2. Open IIS.
3. Expand Sites.
4. Right-click on the Default Web Site > Add Virtual Directory.
EMS Software © 2018 / V44.1 / Page 236
CHAPTER 48: Configure Redirect From Old URL
5. Click OK.
6. Select the newly-created Scheduler virtual directory in IIS.
7. In the Features pane, double-click on HTTP Redirect.
8. Create an HTTP Redirect rule to redirect users to the /suite application.
NOTE: Replace "demo.emergingsoft.com" with your server information.
9. Click Apply, and you're done! Now, when users try to browse to http://server-
/scheduler, they will be redirected to the new URL.
EMS Software © 2018 / V44.1 / Page 237
CHAPTER 48: Configure Redirect From Old URL
CHAPTER 49: Uninstalling aSelf-Packaged Version (v1.6.0.0 -v1.8.2.0)
INTRODUCTION
Web Scheduler v1.8.2.0 and previous were packaged within their own msi, with
additional services requiring a manual installation of each. As of Meet-
ingPlanner Family build v5.5.3.8, the Web Scheduler and its services have
been packaged together with MeetingPlanner. Due to the change in installation
process, you will need to uninstall your current version using the steps below
and then move forward with the new installation.
PROCEDURE
WEB SCHEDULER
1. Open the Control Panel > Add/Remove Programs.
2. Select "MeetingPlanner Web Scheduler."
3. Click "Uninstall."
If you are installing a newer version on this server, please proceed through the
following steps:
EMS Software © 2018 / V44.1 / Page 238
CHAPTER 49: Uninstalling a Self-Packaged Version (v1.6.0.0 - v1.8.2.0)
4. Go to the C:\Program Files (x86)\Emergingsoft\Scheduler directory.
5. Open the web.config and note the "MeetingPlanner Url." (This will be needed for
the installation process)
6. Delete the web.config. While this file is typically retained between versions, there
is an important update that you will need when installing a newer version, so you
will want to delete the existing file. Once your new installation is complete, simply
update the "MeetingPlanner Url" setting.
APPOINTMENT NOTIFIER SERVICE
If you will not be installing a newer version of the Web Scheduler, please skip to
step 3.
1. Open the Services panel.
2. Note the "Log On" account for the "Emergingsoft Appointment Notifier" service.
This will need to be reset after the installation of the newer version of the Web
Scheduler.
3. Open the cmd.exe as an Administrator.
4. Use the "cd" command to navigate to the .NET 4.0 directory.
EMS Software © 2018 / V44.1 / Page 239
CHAPTER 49: Uninstalling a Self-Packaged Version (v1.6.0.0 - v1.8.2.0)
CHAPTER 50: Exchange WebServices
INTRODUCTION
This section covers MeetingPlanner’s use of EWS and impersonation. For addi-
tional, up-to-date information, please see the references below that include rel-
evant Microsoft knowledge articles for each topic.
EXCHANGEWEB SERVICES (EWS)
There are two ways for third-parties to interact with Exchange: MAPI and
ExchangeWeb Services (EWS). This document will cover the latter, which is
the primary avenue for MeetingPlanner to interact with Exchange from the
application server.
While developers are given the ability to interact directly with EWS, Meet-
ingPlanner uses Microsoft’s own EWSManaged API, which is Microsoft’s
recommended interface for interacting with EWS.
EMS Software © 2018 / V44.1 / Page 240
CHAPTER 50: Exchange Web Services
IMPERSONATION
Exchange provides two methods to provide permissions within Exchange, allow-
ing one account to interact with multiple mailboxes: Delegate and Imper-
sonation. Generally speaking, delegate permissions are provided to users,
giving them access to a few other users’ mailboxes, while impersonation is
provided to a service account in order to provide access to a large number of
users’ mailboxes. With the exception of select functions used in Meet-
ingPlanner digital signage, all EWS interaction requires impersonation per-
missions.
Impersonation ultimately provides “Send as” permissions, which means that the
account is able to interact with Exchange as though they are the other user
account. For example, a service account would be able to “impersonate” Joe
User’s account in order to interact with his calendar. An invitation could be sent
to other users, and those users would see the invitation as though it came dir-
ectly from Joe User. This is in direct contrast to delegate permissions, which, in
the same scenario, would result in the invited users receiving an invitation from
the service account with a note that the account was acting on behalf of Joe
User.
It is also important to note that impersonation is something that can only be
enacted through code. If a profile was made for the service account in Outlook,
EMS Software © 2018 / V44.1 / Page 241
CHAPTER 50: Exchange Web Services
no permissions would be able to be enacted as impersonation has no effect in
Outlook. This adds another layer of safety, and supports Microsoft’s design
intentions of providing impersonation for exclusive use by service accounts.
Impersonation is provided by granting the ApplicationImpersonation role to the
service account. These permissions can be limited to a management scope, if
desired. For MeetingPlanner, the service account will need permissions to all
users that may interact with MeetingPlanner.
ACCESSING EWS
As was mentioned earlier, MeetingPlanner utilizes the Microsoft Managed API
library. The library is responsible for sending information down the wire and
receiving the response. This allows all information to be sent securely, via
Microsoft’s own best practices.
Based on the standard setup, which requires an https EWS url, all com-
munications occur via an SSL. MeetingPlanner will also validate the SSL cer-
tificate prior to creating a connection. (As may be required in certain test
environments, there is an option to disable this SSL check: Suite > Menu >
Integrations > EWS > Ignore SSL Errors).
EMS Software © 2018 / V44.1 / Page 242
CHAPTER 50: Exchange Web Services
MEETINGPLANNER APPLICATIONS REQUIRING
EWS
The applications that make use of an EWS connection are displayed below,
along with the specific functions that require the connection.
EWS is required to display user availability in the Web Scheduler. The current
user is impersonated and attendee availability will be displayed based on that
user’s level of permissions to the other users’ calendars. This is an optional func-
tion, which means that the Web Scheduler will continue to work without an EWS
connection (this function simply wouldn’t work).
EWS is required for the Appointment Notifier service to run successfully. This
service is responsible for relaying actions taken in the Web Scheduler to the
user’s Exchange calendar.
EWS is required for MeetingPlanner digital signage, if Exchange is the desired
backend connection. For full functionality, delegate “Read” access to all
resource mailboxes is also required.
EMS Software © 2018 / V44.1 / Page 243
CHAPTER 50: Exchange Web Services
REFERENCES
https://msdn.microsoft.com/en-us/lib...xchg.150).aspx
https://msdn.microsoft.com/en-us/lib...xchg.150).aspx.
https://msdn.microsoft.com/en-us/lib...xchg.150).aspx
https://msdn.microsoft.com/en-us/lib...chg.80%29.aspx
EMS Software © 2018 / V44.1 / Page 244
CHAPTER 50: Exchange Web Services
CHAPTER 51: Using Web Sched-ulerMeetingPlanner Web Scheduler simplifies room and resource scheduling with
its interactive interface. It allows users to reserve rooms, equipment, catering,
videoconferencing and setup, and automatically generates notifications for
such requests. Web Scheduler can be used as a stand-alone application or in
conjunction with Outlook/Exchange and other MeetingPlanner applications.
EMS Software © 2018 / V44.1 / Page 245
CHAPTER 51: Using Web Scheduler
CHAPTER 52: Access and ViewMeetingPlanner Web Scheduler
1. Open the Web Scheduler with the URL provided by the Systems Administrator
(e.g., http://yourserver/suite).
2. Select the calendar icon to open the Web Scheduler application.
3. Select from three calendar views: 1 (day), 5 (week), or 28 (month).
EMS Software © 2018 / V44.1 / Page 246
CHAPTER 52: Access and View MeetingPlanner Web Scheduler
NOTE: Reservations can be edited but cannot be created from the monthly
view.
EMS Software © 2018 / V44.1 / Page 247
CHAPTER 52: Access and View MeetingPlanner Web Scheduler
CHAPTER 53: Features
TODAY
Use the Today feature to force the Web Scheduler to return to the current date
on the calendar.
SELECT AND VIEW ROOM GROUP
1. Select the desired Room Group to schedule meetings from using the dropdown
field. Web Scheduler automatically defaults to the user’s preset building.
NOTE: Room Groups can be created, edited, or deleted if a user has access
(security permissions).
2. Verify the rooms in the Room Group.
EMS Software © 2018 / V44.1 / Page 248
CHAPTER 53: Features
VIEW ROOM DESCRIPTION
1. View the room ‘Resource Details’ by left clicking the mouse on the information
icon to the right of the desired room. (1, daily view only.)
2. Verify ‘Resource Details’ and Close.
SPOTLIGHT
Use the Spotlight feature to highlight a type (ie. All, My Reservations, Room
Setup, Catering, Equipment, or Videoconference) of reservation on the Web
Scheduler calendar.
USER AVAILABILITY
The User Availability feature identifies a user’s free/busy time on the Web
Scheduler calendar. The User Availability feature may or may not be enabled.
EMS Software © 2018 / V44.1 / Page 249
CHAPTER 53: Features
1. Enter the user’s name in the Search field.
2. Select next to the user’s name once it appears. The name of the user will appear
above the Search field. All meetings that the user is the owner of or is attending
will be viewed on the Web Scheduler calendar.
3. To remove a user from the ‘User Availability’ window, select the next to the user’s
name.
IMPORTANT: All users listed under the ‘User Availability’ window are auto-
matically invited to meetings created thereafter.
ICONSIMAGE DESCRIPTION
Icon 3 arrows on the 5 (weekly) view of the Web Scheduler calendar, indicate
that there are additional reservations earlier or later that day. Use the scroll bar
on the right side of the screen to view all existing meetings.
Takes the user back to homepage. From the homepage, users can select a new
MeetingPlanner application to access (e.g., Web Scheduler, Room Sign).
Calendar icon takes the user back to the Web Scheduler calendar.
EMS Software © 2018 / V44.1 / Page 250
CHAPTER 53: Features
IMAGE DESCRIPTION
Navigation icon allows the user to submit a request, create a reservation, and to
access MeetingPlanner configuration settings. Options available from the nav-
igation icon will depend on user access (security permissions).
Icon allows the user to view room resource details (1, daily view only).
Indicates videoconferencing is reserved with the reservation (1 and 5 day view
only).
Indicates catering is reserved with the reservation (1 and 5 day view only).
Indicates the meeting is recurring.
Indicates equipment is reserved with the reservation (1 and 5 day view only).
EMS Software © 2018 / V44.1 / Page 251
CHAPTER 53: Features
CHAPTER 54: Create a Meeting
NOTES: Meetings cannot be made in the past unless a user has access
(security permissions). All fields labeled with an ‘*’ asterisk are required.
1. Click and drag the cursor in the box corresponding to the desired meeting time
and room on the Web Scheduler calendar,
—or—
Select the navigation icon from the top right corner of the Web Scheduler cal-
endar and Quick Actions > Create Reservation from the dropdown menu.
2. The meeting Owner field automatically defaults the name of the user creating the
meeting.
3. Select Invitees dropdown field to invite attendees.
4. Verify the desired date, time, and room. Click on Date field and use calendar to
change date. Use +/- next to start and end times to edit meeting Time. Click on
room or please select… dropdown field to view additional available rooms. View
‘Room Details’ under room selected.
EMS Software © 2018 / V44.1 / Page 252
CHAPTER 54: Create a Meeting
NOTE: When editing meeting start time using +/- feature, meeting end time
will automatically increase or decrease by 30 minute increments.
When using the navigation icon, make sure to enter the desired meeting time;
otherwise, the reservation automatically defaults to the nearest next hour from
the current time and the date previously selected.
5. Select the desired timezone from the View Alternate Timezone dropdown.
6. Name the meeting in the Subject field.
7. Enter and/or track the number of invited attendees in the # of Attendees field. Use
# of Attendees field as a search parameter; the Web Scheduler will use this num-
ber to search for an available room that will accommodate the number of
attendees invited. The # Attendee field can also be used to simply track the num-
ber of attendees.
NOTE: Manually update the # of Attendees field as attendees are added.
NOTE: The Web Scheduler automatically generates invitations/notifications
from the reservation Owner to the Invitees.
8. Select desired option from the Client Matter dropdown field. The client matter
options are preset by the organization. The Client Matter field may or may not be
EMS Software © 2018 / V44.1 / Page 253
CHAPTER 54: Create a Meeting
enabled. If enabled and required*, the first set of data on the Client Matter list will
automatically default unless the user makes a different selection.
9. Select desired option from the Activity Code dropdown field. Activity codes are
preset by the organization. The Activity Code field may or may not be enabled. If
the Activity Code is enabled and required, the first set of data on the Activity Code
list will automatically default unless the user makes a different selection.
10. Enter the desired department code in the Billing Code field. Department codes
are determined by the organization. The Billing Code field may or may not be
enabled. If enabled and required*, the user must enter a valid code. A user may
have a billing code assigned to them in their user profile. In this instance, the
user’s billing code will automatically default.
11. Enter Custom field information. Custom field labels are determined by the organ-
ization. The Custom fields may or may not be enabled. If enabled and required*,
the user will have to enter custom field information to complete the reservation.
12. Enter any additional meeting information in the Notes box. The Notes box may or
may not be enabled.
13. Enable public to allow the meeting to be viewed by non-users (optional). The
Public option may or may not be enabled.
14. Select Reserve and Close.
NOTE: A unique reservation identification number is assigned to each reser-
vation and is located at the bottom of the ‘Reservation Manager’ window.
EMS Software © 2018 / V44.1 / Page 254
CHAPTER 54: Create a Meeting
NOTE: Web Scheduler does not allow users to double book meeting rooms
or resources. The ‘Reservation Manager’ window only returns available
rooms and resources.
NOTE: Meetings created in Web Scheduler automatically synchronize to
Outlook/Exchange and other MeetingPlanner applications (e.g., FloorPlanner,
Room Sign, etc).
ASSIGN DELEGATE
Users who have delegate access (security permission) can reserve on behalf of
another user.
1. Select the Owner field to assign a delegate.
2. Name and Search for the new delegate under Select User for Delegate Reser-
vation field.
3. Select + next to the name and email address of the desired delegate.
4. Select Reserve and/or Close.
EMS Software © 2018 / V44.1 / Page 255
CHAPTER 54: Create a Meeting
NOTE: Once a delegate reservation is reserved and closed, the ‘Reservation
Manager’ window will prompt the user to Send or Close (not send) an email
notification to the Delegate of the reservation. By default, the email will con-
tain a reservation summary; the contents can be updated.
INVITE ATTENDEES
1. Select Invitees dropdown field.
2. Name and for the attendees to invite in the Add Invitees field.
3. Select + next to the name(s) and email address(es) of the attendee(s) to invite.
NOTE: If the invitee does not have a MeetingPlanner User Profile, the email
address can be added (ie, [email protected]).
ADD ROOM
1. Select the desired meeting from the Web Scheduler calendar and reserve an addi-
tional room.
2. Select Add Room.
3. Click room dropdown field and select next to the desired room to add to the reser-
vation.
4. Add room setup, equipment, catering, to the reservation to attach to the added
EMS Software © 2018 / V44.1 / Page 256
CHAPTER 54: Create a Meeting
room.
5. Select Reserve and Close.
ADD ROOM SETUP
1. Select the Setup dropdown field and view the available setup types. The setup
field only appears if setup is available in the selected room.
2. Select next to the desired setup type.
NOTE: Organizations may identify setup reservation cut-off hours before a
meeting. Users will not be able to reserve meetings with setup within the set
cut-off time (unless “No Preference” setup is chosen).
NOTE: Web Scheduler automatically generates a notification to support the
setup crew indicating the meeting room, time, date, and setup request.
3. Enter any additional instructions for the setup support crew in the Instructions box.
4. Select Reserve or Update.
NOTE: Typically, organizations attach buffer times to both ends of a meeting
with setup. Reservation buffer times will be viewed from the Web Scheduler
EMS Software © 2018 / V44.1 / Page 257
CHAPTER 54: Create a Meeting
calendar. If “No Preference” setup is chosen, no buffer times will be attached
and the reservationist will reserve the room as it was previously setup.
ADD EQUIPMENT
Included in ‘Room Details,’ from the ‘Reservation Manager’ window, is the list of
installed equipment in the selected room. If you would like to reserve additional
portable equipment:
1. Select Equipment field for list of available portable equipment. Use the scroll bar
to view all portable equipment that is available at the time/date of the reservation.
2. Select the desired portable equipment to add to the room.
NOTE: Organizations may identify portable equipment reservation cut-off
hours before a meeting. Users will not be able to reserve meetings with port-
able equipment within the set cut-off time.
3. Enter any additional instructions for the equipment support crew in the Instruc-
tions box.
4. Select Reserve or Update. Once portable equipment is reserved with a room, an
equipment icon will be attached to the meeting and viewed from the Web Sched-
uler calendar (1 and 5 day view ONLY).
EMS Software © 2018 / V44.1 / Page 258
CHAPTER 54: Create a Meeting
NOTE: Web Scheduler automatically generates a notification to the equip-
ment support crew indicating the meeting room, time, date, and portable equip-
ment reservation. Emails are not sent to equipment support crews when
rooms that house fixed equipment are reserved since this equipment is
ALWAYS in the room; no support is needed.
NOTE: Typically, organizations attach buffer times to both ends of a meeting
that includes a portable equipment reservation. Reservation buffer times will
be viewed from the Web Scheduler calendar.
ADD CATERING
INTERNAL
1. Select Catering dropdown field.
2. Select next to the desired Internal catering vendor/location. Orders from different
vendors must be added separately to a reservation. See Add Catering Vendor.
3. Select (All) field and next to the desired catering category. Use the scroll bar to
view all catering categories (e.g., beverage, snack, entrée, etc.).
4. Click and drag the cursor over the “0” next to the desired catering item(s) and
enter the quantity of items needed from the ‘Order’ window.
EMS Software © 2018 / V44.1 / Page 259
CHAPTER 54: Create a Meeting
NOTE: Menu items from multiple categories can be submitted in a single
catering order.
NOTE: Organizations may identify catering reservation cut-off hours before a
meeting. Users will not be able to reserve catering within the set cut-off time.
5. Enter any additional instructions for catering support crew in the Instructions box.
6. Verify the delivery time and update as necessary. Delivery time automatically
defaults to the meeting start time. Delivery times that are set 2 hours or more prior
to the meeting start time will NOT be associated with the meeting. Catering reser-
vations that are NOT associated with a meeting room will be available through a
report ONLY.
7. Select Reserve or Update. Once catering is reserved with a room, a catering icon
will be attached to the meeting and viewed from the Web Scheduler homepage (1
and 5 day view ONLY) .
NOTE: Web Scheduler generates a notification to the catering support crew
indicating the meeting room, requested delivery time, date, and catering order.
EMS Software © 2018 / V44.1 / Page 260
CHAPTER 54: Create a Meeting
EXTERNAL
1. Select Catering dropdown field.
2. Select next to the desired External catering vendor/location. Orders from different
vendors must be added separately to a reservation.
3. Select Click here to place order from ‘Order’ window. User will launch into
external catering website.
NOTE: External catering must be arranged by contacting the external vendor.
ADD CATERING VENDOR
An additional catering vendor and order can be added to an existing meeting.
1. Select Edit from the existing ‘Catering Orders’ window.
2. Select Add Order.
3. Select next to the desired Internal/External catering vendor/location and create
catering order.
ADD VIDEOCONFERENCING
1. Select Videoconference field. The videoconference field is viewable from the
‘Reservation Manager’ window when rooms with videoconference capabilities
are selected ONLY.
2. Select next to the desired role from the dropdown field.
EMS Software © 2018 / V44.1 / Page 261
CHAPTER 54: Create a Meeting
3. Enter any additional instructions in the Notes box.
4. Select Reserve or Update.
NOTE: Web Scheduler automatically generates a notification to the presenter
and the videoconference support contact with the video conference reser-
vation information.
EMS Software © 2018 / V44.1 / Page 262
CHAPTER 54: Create a Meeting
CHAPTER 55: Create RecurringMeetings
1. Create a meeting, but DO NOT Reserve until all field information—to attach to the
entire recurring series—is entered. Once Reserve is selected, changes/additions
can be made to single occurrences ONLY. (Exception: rooms can be added to
entire series. Setup, equipment, and catering can be reserved with the added
room.)
2. Select Single Occurrence field and next to the desired recurring pattern.
3. Click and highlight over the corresponding fields and enter or check next to the
applicable recurring details.
4. Enter all field information, (ie. resources), to attach to the entire recurring series.
5. Select Reserve and Close. Once a recurring reservation is made, a recurring
icon will be attached to each meeting in the series and viewed from the Web
Scheduler calendar (1 and 5 day view ONLY).
RECURRINGMEETINGWITH CONFLICT
If there is a conflict with the recurring meeting, a message with the conflicting
date(s), and room number will appear at the bottom of the ‘Reservation Man-
ager’ window. In addition, the ‘Unreserved Dates’ window is viewed. All dates of
recurring meetings—except dates with conflicts—will be scheduled. Meetings
EMS Software © 2018 / V44.1 / Page 263
CHAPTER 55: Create Recurring Meetings
with conflicts must be rescheduled as a new meeting using an alternate date,
time, and/or room.
If select Recurs Daily, enter the frequency and number of occurrences to set the recur-
ring meeting.
If select Recurs Weekly, select next to the desired days, and enter the number of
occurrences to set the recurring pattern.
If select Recurs Monthly, enter the desired frequency, day, and number of occurrences
to set the recurring patten.
Web Scheduler will automatically set the monthly recurring default to the day ori-
ginally selected.
ADD ROOM TO SINGLE OCCURRENCEOF
RECURRING SERIES
1. Select the desired recurring meeting from the Web Scheduler calendar to add a
room,
—or—
select View Series from any one of the occurrence dates from the series.
2. Add room setup, equipment, catering, videoconferencing, and notes to reserve with
added room (optional).
EMS Software © 2018 / V44.1 / Page 264
CHAPTER 55: Create Recurring Meetings
3. Select Edit from the desired single occurrence reservation.
4. Select Add Room.
5. Use the Please Select field and select next tot he desired room to add to the single
occurrence of the recurring series.
6. Select Update and Close.
ADD ROOM TO ENTIRE RECURRING SERIES
1. Select any one of the recurring dates in the series from the Web Scheduler cal-
endar to add a room to the entire recurring series.
2. Select View Series.
3. Select Add to Series.
4. Use the Please Select field and select next to the desired room to add to the
entire recurring series. Add room setup, equipment, catering, videoconferencing,
and notes to reserve with added room (optional).
5. Select Update and Close.
EMS Software © 2018 / V44.1 / Page 265
CHAPTER 55: Create Recurring Meetings
CHAPTER 56: Room Groups
CREATE ROOM GROUPS
NOTE: To create a room group, users must have access (security per-
mission).
1. Select under ‘Room Group’ from the Web Scheduler calendar page.
2. Name the room group in the Schedule Name field.
3. Select the desired Building from the dropdown field. Room numbers will appear
in the box on the left of the ‘Create Group’ window.
Select either:
Desired rooms and Add, or
Add All to select the entire list of rooms.
NOTE: The rooms selected appear on the right side of the ‘Create Group’ win-
dow once they have been added to the new room group.
4. Select Save.
EMS Software © 2018 / V44.1 / Page 266
CHAPTER 56: Room Groups
NOTE: Once the new room group is created and saved, the page will load.
Once loaded, the new room group will be visible under the ‘Room Group’
dropdown for the user to select.
EDIT ROOM GROUP
1. Select the group to edit from the ‘Room Group’ dropdown box.
2. Select the edit tool.
Edit options:
Schedule Name
Building
Add rooms or Add All
Remove rooms or Remove All
3. Select Save.
4. Select the schedule group just edited under ‘Room Group’ to view or utilize.
DELETE SCHEDULE GROUP
1. Select the Schedule Group to delete from the dropdown box under ‘Room Group’
dropdown box.
2. Select delete.
EMS Software © 2018 / V44.1 / Page 267
CHAPTER 56: Room Groups
3. Select Yes in the ‘Please Confirm Deletion’ window to delete.
EMS Software © 2018 / V44.1 / Page 268
CHAPTER 56: Room Groups
CHAPTER 57: Edit Meeting
EDIT MEETING
NOTE: Both the Owner and Delegate can edit a meeting. Meetings from the
past cannot be edited unless the user has access (security permissions).
1. Select the meeting to edit from the Web Scheduler calendar.
2. Select Edit Time to change date and/or time of meeting. Click on Date field and
select desired date from the calendar. Use +/- next to start and end times to edit
meeting time. Meeting end time will automatically increase or decrease accord-
ingly by 30 minute increments.
—or—
Drag the meeting start and/or end time from the Web Scheduler calendar. (1,
daily view only.)
NOTE: If editing the date/time of an existing room poses a conflict, the Web
Scheduler will not reserve but instead will call out conflicts in red text. In addi-
tion, the meeting will revert back to the original date/time.
EMS Software © 2018 / V44.1 / Page 269
CHAPTER 57: Edit Meeting
3. Edit any of the following fields to make changes:
Owner/Delegate
NOTE: ‘Reservation Manager’ automatically generates an email notification
with updates. The user has the option to Send the notification or Close (not
send notification).
WARNING: Anytime a delegate owner is assigned to a recurring meeting
(even if the delegate is assigned to a single meeting in the series), the Web
Scheduler automatically makes the delegate the owner of ALL of the meet-
ings in the series.
Invitees
Subject
# of Attendees
Client Matter
Activity Codes
Billing Codes
Custom Fields
Notes
Public
EMS Software © 2018 / V44.1 / Page 270
CHAPTER 57: Edit Meeting
Reserved Rooms, Edit
Setup
Setup Instruction
TheWeb Scheduler automatically generates an email notification to the support
setup crew with setup updates.
Equipment
TheWeb Scheduler automatically generates an email notification to the port-
able equipment support crew with equipment updates.
Equipment Instructions
Catering
Catering orders and additional catering vendors can be added by editting an
existing reservation. Edit orders as necessary and see Add Catering Vendor.
Catering Instructions
TheWeb Scheduler automatically generates an email notification to the cater-
ing support crew with catering updates.
Catering Delivery Time/Room.
EMS Software © 2018 / V44.1 / Page 271
CHAPTER 57: Edit Meeting
The catering delivery room can only be changed if more than one room is
attached to the reservation.
Videoconference
NOTE: Edits made to meetings in Web Scheduler automatically synchronize
to Outlook/Exchange and other MeetingPlanner applications.
4. Select Update and Close.
ASSIGN CATERING ORDER TO A DIFFERENT
ROOM
Once an additional room has been added to a reservation, the user can reas-
sign the catering delivery room if desired.
1. Select Edit next to the room with the existing catering order.
2. Select the Catering field.
3. Select Edit from Catering Orders field.
4. Scroll to the bottom of the ‘Reservation Manager’ window.
5. Select the dropdown arrow and next to the desired room to reassign the catering
order. The catering order will be assigned and delivered to the new room.
EMS Software © 2018 / V44.1 / Page 272
CHAPTER 57: Edit Meeting
NOTE: Web Scheduler generates a notification to the catering support crew
indicating the new delivery room, requested delivery time, date, and catering
order.
6. Select Update.
EMS Software © 2018 / V44.1 / Page 273
CHAPTER 57: Edit Meeting
CHAPTER 58: Delete Meeting1. Select the meeting to delete from the Web Scheduler calendar.
2. Select Delete from the bottom left corner of the ‘Reservation Manager’ window.
3. Select Confirm Deletion.
NOTE: Meetings deleted in Web Scheduler are automatically deleted in
Outlook/ Exchange and other MeetingPlanner applications.
EMS Software © 2018 / V44.1 / Page 274
CHAPTER 58: Delete Meeting
CHAPTER 59: Edit RecurringMeeting
1. Select the single occurrence of a recurring meeting to edit from the Web Sched-
uler homepage,
—or—
Select any one of the recurring dates in the series.
2. Select Edit.
—or—
Select View Series and choose the desired occurrence to Edit.
3. Edit desired single occurrence meeting. Single occurrence meetings are edited
as regular meetings.
NOTE: Edits made to recurring meetings in Web Scheduler are automatically
updated in Outlook/ Exchange and other MeetingPlanner applications.
EMS Software © 2018 / V44.1 / Page 275
CHAPTER 59: Edit Recurring Meeting
CHAPTER 60: Delete SingleOccurrence of Recurring Meeting
1. Select the single occurrence of a recurring meeting to delete from the Web Sched-
uler calendar.
—or—
Select any one of the recurring dates in the series.
2. Select Delete from the single occurrence from the room window.
—or—
Select View Series and choose the occurrence from the entire series to
Delete from the ‘Reserved Rooms’ window.
NOTE: Single occurrence meetings deleted in Web Scheduler are auto-
matically deleted in Outlook/ Exchange and other MeetingPlanner applic-
ations.
EMS Software © 2018 / V44.1 / Page 276
CHAPTER 60: Delete Single Occurrence of Recurring Meeting
CHAPTER 61: Submit RequestUsers who haveWeb Scheduler access (security permissions) can make a
meeting request using the navigation icon and Quick Actions>Submit a
Request feature.
1. Select the feature from the top right corner of the Web Scheduler calendar, Action-
s>Submit Request to make a reservation request.
2. Select the Start/End date and Time fields to set meeting details.
3. Use the Room dropdown menu to highlight and select the desired room.
4. Use the dropdown box to highlight and select the desired room setup (if available).
5. Enter additional information in customized, multi-line, and activity code fields. Addi-
tional fields may or may not be enabled. Fields below are examples of custom
fields.
Name
Department
Attendee Count
AV Requests
Catering Requests
Meeting Notes
6. Select Send. Web Scheduler automatically generates a notification to the admin-
istrator responsible for approving or denying reservation requests. The approver
EMS Software © 2018 / V44.1 / Page 277
CHAPTER 61: Submit Request
must inform the requester of approval/denial as well.
NOTE: Once a meeting request is approved, it will be viewable on the Web
Scheduler calendar.
EMS Software © 2018 / V44.1 / Page 278
CHAPTER 61: Submit Request
CHAPTER 62: Use Outlook/Ex-change in Conjunction with WebScheduler Use standard Outlook procedures to:
Create a meeting
Edit a meeting
Delete a meeting
Invite attendees
Attach notes
NOTE: All meetings and updates created in Web Scheduler will update in
Outlook/Exchange and other MeetingPlanner applications.
EMS Software © 2018 / V44.1 / Page 279
CHAPTER 62: Use Outlook/Exchange in Conjunction with Web Scheduler
CHAPTER 63: Web SchedulerQuick ReferenceMeetingPlanner Web Scheduler simplifies room and resource scheduling with
its interactive interface. It allows users to reserve rooms, equipment, catering,
videoconferencing and setup, and automatically generates notifications for
such requests. Web Scheduler can be used as a stand-alone application or in
conjunction with Outlook/Exchange and other MeetingPlanner applications.
ACCESS AND VIEW MEETINGPLANNERWEB
SCHEDULER
1. Open the Web Scheduler URL provided by the Systems Administrator (e.g., http://y-
ourserver/suite).
2. Select the calendar icon to open the Web Scheduler application.
3. Select from three calendar views:
1 (day)
5 (week)
28 (month)
EMS Software © 2018 / V44.1 / Page 280
CHAPTER 63: Web Scheduler Quick Reference
TODAY
Use the Today feature to force the Web Scheduler to return to the current date.
SELECT AND VIEW ROOM GROUP
1. Select the desired Room Group to schedule from using the dropdown field.
2. View the room ‘Resource Details’ from the calendar by left clicking the mouse on
the information icon to the right of the desired room number (1-daily view only).
SPOTLIGHT
Use the Spotlight feature to highlight a type (ie. All, My Reservations, Room
Setup, Catering, Equipment, or Videoconference) of reservation on the Web
Scheduler calendar.
USER AVAILABILITY
The User Availability feature identifies a user’s free/busy time on the Web
Scheduler calendar.
1. Enter the user’s name in the Search field.
2. Select next to the user’s name once it appears. All meetings that the user is the
owner of or is attending, will be highlighted on the Web Scheduler calendar.
EMS Software © 2018 / V44.1 / Page 281
CHAPTER 63: Web Scheduler Quick Reference
IMPORTANT: All users listed under the ‘User Availability’ window are auto-
matically invited to meetings created thereafter.
CREATEMEETING
1. Click and drag the cursor in the box corresponding to the desired meeting time and
room on the Web Scheduler calendar,
—or—
Select the navigation icon from the top right corner of the Web Scheduler cal-
endar and Quick Actions>Create Reservation from the dropdown menu.
2. Verify the desired Date&Time of the meeting in the ‘Reservation Manager’ window.
3. Select the desired timezone from the View Alternate Timezone dropdown.
4. Name the meeting in the Subject field.
5. Enter # of Attendees to search for rooms with accommodating capacities. See
more detail in Invite Attendee section below.
6. Verify room or select from the list of available rooms from the Please select… drop-
down field and Reserve.
7. Select desired client matter, billing, and/or activity code (if enabled) from the drop-
down field and Update or Reserve.
EMS Software © 2018 / V44.1 / Page 282
CHAPTER 63: Web Scheduler Quick Reference
8. Enable public (optional) to allow the meeting to be viewed by non-users.
9. Update, or Reserve and Close. A unique reservation identification number is
assigned to each Reservation and is located at the bottom of the ‘Reservation Man-
ager’ window.
INVITE ATTENDEES
1. Select Invitees dropdown field.
2. Name and Search for the attendees to invite in the Add Invitees field.
3. Select next to the name(s) and email address(es) of the attendee(s) to invite.
4. Enter attendee count, as a room search parameter, and/or track the number of
invited attendees in the # of Attendees field. If attendee count exceeds the room
capacity, reserve the room before entering attendee count. To do this Save and
Close the room reservation. Open if back up, Edit and enter the Attendee count.
5. Update and Close. Manual updates must be made to update this field as additional
attendees are invited.
ASSIGN DELEGATE
1. Select the Owner field to assign a delegate.
2. Name and Search for the new delegate under Select User for Delegate Reser-
vation field.
3. Select next to the name and email address of the desired delegate.
4. Reserve or Update, and Close.
EMS Software © 2018 / V44.1 / Page 283
CHAPTER 63: Web Scheduler Quick Reference
ADD ROOM
1. Select the desired meeting from the Web Scheduler calendar.
2. Select Add Room.
3. Click Please Select... dropdown field and select next to the desired room to add to
the reservation. Add room setup, equipment, catering, etc. reservation to attach to
added room.
4. Reserve and Close.
ADD ROOM SETUP
1. Select the Setup dropdown field from the ‘Reservation Manger’ window (when
setup is available) and view the setup types. The setup field only appears if setup
is available for the chosen room.
2. Select next to the desired setup type and Reserve or Update.
ADD EQUIPMENT
1. Select Equipment field for the list of available portable equipment.
2. Select next to the desired portable equipment, and Reserve or Update.
ADD CATERING
1. Select Catering dropdown field.
2. Select next to the desired catering vendor/location.
EMS Software © 2018 / V44.1 / Page 284
CHAPTER 63: Web Scheduler Quick Reference
NOTE: The External catering website is launched by selecting: Click here to
place order from ‘Order’ window. Catering arrangements must be made by
contacting external vendor.
3. Select (All) field and next to the desired catering category (ie. beverage, snack,
entrée).
4. Click and drag the cursor over the “0” next to the desired catering item(s) and enter
the quantity of items needed from the ‘Order’ window.
5. Verify or update Delivery Time. Delivery Time can not exceed 2 hours prior to a
meeting: the order will be disassociate from the reservation.
6. Select Reserve or Update.
CREATE RECURRINGMEETINGS
1. Select Single Occurrence field and next to the desired recurring pattern.
2. Click and highlight over the corresponding fields and enter or next to the applic-
able recurring details.
3. Enter all field information (ie. resources)—to attach to the entire recurring series.
4. Select Reserve and Close.
EDIT MEETING
1. Select the meeting to edit from the Web Scheduler calendar.
2. Select Edit Time to change date and/or time of meeting.
EMS Software © 2018 / V44.1 / Page 285
CHAPTER 63: Web Scheduler Quick Reference
3. Edit any of the following fields, Update and Close:
Owner/Delegate
Invitees
Subject
# of Attendees
Client Matter, Billing, and Activity Code
Reserved Rooms, Edit
Setup
Equipment
Catering, Edit
Catering Delivery Time/Room
NOTE: Delivery Time can not exceed 2 hours prior to a meeting: the order will
be disassociate from the reservation. The catering delivery room can only be
changed if more than one room is attached to the reservation.
4. Select Reserve or Update.
DELETEMEETING
1. Select the meeting to delete from the Web Scheduler calendar.
2. Select Delete from the bottom left side of the ‘Reservation Manager’ window.
3. Select Confirm Deletion.
EMS Software © 2018 / V44.1 / Page 286
CHAPTER 63: Web Scheduler Quick Reference
USE OUTLOOK/EXCHANGE IN CONJUNCTION
WITH WEB SCHEDULER
Use standard Outlook procedures to:
Create, Edit, and/or Delete a meeting
Invite attendees and attach notes
Assign and/or Add a room
NOTE: All meetings and updates created in Web Scheduler synchronize to
Outlook and all other MeetingPlanner applications.
EMS Software © 2018 / V44.1 / Page 287
CHAPTER 63: Web Scheduler Quick Reference
CHAPTER 64: Meeting PlannerFloor PlannerMeeting Planner Floor Planner allows users to quickly reserve and view avail-
able meeting rooms from a mobile phone or digital display. It synchronizes and
can be used in conjunction with Outlook/Exchange and all Meeting Planner soft-
ware.
This section provides information on Installing, Configuring and Using Meeting
Planner Floor Planner.
EMS Software © 2018 / V44.1 / Page 288
CHAPTER 64: Meeting Planner Floor Planner
CHAPTER 65: Prerequisites
INTERNET BROWSERS (CLIENT-SIDE)BROWSER SUPPORT
Internet Explorer IE 11 or Above
Chrome Chrome 5 or Above
Firefox Firefox 3 or Above
Safari Safari 4 or Above
APPLICATION SERVER
PREREQUISITE DETAILS
Operating System Windows Server 2008/R2, 2012
Internet Information Services IIS6 or above (Recommended: IIS7 or above)
EMS Software © 2018 / V44.1 / Page 289
CHAPTER 65: Prerequisites
PREREQUISITE DETAILS
PHP v5.3*
Microsoft .NET Framework v4.0.30319 or above
MeetingPlanner v5.5.1.45 or above
MPTouch V4.8.0.81
*Download for IIS PHP v5.3 can be found at http://php.iis.net/
DATABASE SERVER
MeetingPlanner must be installed and configuration must be complete.
EMS Software © 2018 / V44.1 / Page 290
CHAPTER 65: Prerequisites
CHAPTER 66: Installation
PHP
1. Go to http://php.iis.net to download and install PHP 5.3. By default, the PHP will
install to program files (x86).
2. Use the Installation Guide to set up IIS7 (and above) to work with PHP at:
http://www.php.net/manual/en/install.windows.iis7.php. Do not utilize the command
prompt instructions from the Installation Guide: perform the operation from the iis
gui.
3. Open the php.ini from the php folder.
4. Enter the time zone in the two date.timezone text fields. Make sure to delete the ‘;’
before the entry.
FLOORPLANNER SETUPWIZARD
1. From the application server, run the Meetingplanner msi.
2. Walk through the installation wizard.
NOTES: The FloorPlanner should be installed in the Meeting Planner suite
site.
Access FloorPlanner at: http://yourserver/suite/floorplanner.
EMS Software © 2018 / V44.1 / Page 291
CHAPTER 66: Installation
ADD LICENSE KEY TO DATABASE
1. Open the configuration tool on the server to access the MeetingPlanner Database.
2. Select Database.
3. Copy and paste the license key file, provided by EMS Software, in the cor-
responding field.
4. Select Update Database.
5. Save.
EMS Software © 2018 / V44.1 / Page 292
CHAPTER 66: Installation
EMS Software © 2018 / V44.1 / Page 293
CHAPTER 66: Installation
CHAPTER 67: TroubleshootingUNABLE TO VIEW ICONS
NEXT STEPS:
Check permissions to mpfloorplanlog.txt.
Regular users may require full access depending on iis settings.
ROOMS VIEWED AS RESERVED (WHEN THEY ARE
AVAILABLE)
NEXT STEPS:
Verify room identification numbers are correct in xml file.
Identification numbers should mirror room identification numbers in Meet-
ingPlanner.
To determine room identification numbers, please go to: Admin-
istration>Reports and run a room report.
EMS Software © 2018 / V44.1 / Page 294
CHAPTER 67: Troubleshooting
UNABLE TO VIEW FLOOR PLAN IN IE
NEXT STEPS:
Verify compatibility mode is enabled.
Verify server URL is correct in FloorPlanner settings.
The fully qualified domain may be needed.
UNABLE TO VIEW ENTER PRINTER OR ROOM
DETAILS POPUPWINDOW
NEXT STEPS:
Verify the browser allows popups from the FloorPlanner website.
EMS Software © 2018 / V44.1 / Page 295
CHAPTER 67: Troubleshooting
CHAPTER 68: FloorPlannerAdministrator Page(http//yourserver/suite/FloorPlanner/floor-plan-editor.php)
Once the custom floor plan is installed, rooms and features can be added to the
floor plan.
NOTE: The floor plan view can be adjusted using the (+/-) feature.
ADD ROOMS TO THE FLOOR PLAN
IDENTIFY NEW ROOM LOCATION
1. Select the floor, at which the room will be added, from the dropdown field.
2. Position the crosshair in the center of the desired space to identify the new room
location. Click and drag the map to position the crosshair.
EMS Software © 2018 / V44.1 / Page 296
CHAPTER 68: FloorPlanner Administrator Page
3. Select the Add New Room id at Map Center. The ‘Enter Printer or Room Details’
popup window appears.
NOTE: If the ‘Enter Printer or Room Details’ popup window does not open,
make sure your browser allows popups.
EMS Software © 2018 / V44.1 / Page 297
CHAPTER 68: FloorPlanner Administrator Page
ENTER PRINTER OR ROOMDETAILS
1. Name the room, select the room Model, and enter the room Identification number.
These fields are required. The room model appears in a dropdown list as either a
conference room or hot desk. The room name and number will appear in the
FloorPlanner.
NOTES: The identification number entered should mirror room identification
numbers in MeetingPlanner. The room identification number links the
FloorPlanner and MeetingPlanner reservation data.
To determine room identification numbers, please go to: Admin-
istration>Reports and run a room report. Floor, X, and Y fields populate auto-
matically.
2. Enter additional field information, (optional).
3. Verify the room information entered and Submit. The new room number will
appear in FloorPlanner.
EMS Software © 2018 / V44.1 / Page 298
CHAPTER 68: FloorPlanner Administrator Page
ADD FEATURES TO THE FLOOR PLAN
1. Select the floor at which to add a feature.
2. Use the Select a Room id to Edit dropdown box to highlight and select desired
room to add a feature. Room id, floor, x, and y fields will automatically populate.
Cross hair will automatically position to the room selected.
EMS Software © 2018 / V44.1 / Page 299
CHAPTER 68: FloorPlanner Administrator Page
NOTE: You can also position the crosshair in the center of the desired space
at which to add the new feature. Click and drag the map to position the
crosshair.
3. Use the AED dropdown box to highlight and select the desired feature.
4. Select Add a new feature. An icon (e.g., Image to represent eyewash, bathroom,
etc.), will be viewed from the flooplan to indicate the added feature.
5. Select Save Changes.
EMS Software © 2018 / V44.1 / Page 300
CHAPTER 68: FloorPlanner Administrator Page
CHAPTER 69: Modify Rooms
EDIT A ROOM
1. Select the applicable floor to edit a room.
2. Use the Select a Room id to Edit dropdown box to highlight and select the desired
room to edit. Room id, floor, x, and y fields automatically populate. The cross hair
will automatically position to the room selected.
3. Edit any of the following fields to make changes:
Phone Jack 1-4
House Pairs 1-4
Network Location
4. Select Save Changes.
DELETE A ROOM
1. Select the desired floor to delete a room.
2. Use the Select a Room id to Edit dropdown box to highlight and select the desired
room to delete. Room id, floor, x, and y fields automatically populate. The cross
hair will automatically position to the room selected.
3. Select Delete Room id and Save Changes.
EMS Software © 2018 / V44.1 / Page 301
CHAPTER 69: Modify Rooms
CHAPTER 70: Settings(http//yourserver/suite/FloorPlanner/settings.php)
Access the Floor Planner Settings page to customize the Floor Plan envir-
onment.
UPLOAD IMAGES
1. Select Choose File to upload a Logo Image. (Utilize .Png files ONLY that are 250
x 50 px or less.)
2. Select the Choose File icon to upload a custom Open Image. (Utilize .Png files
ONLY that are 20 x 25 px or less.) The image will be displayed when the room is
available at the selected time/date.
3. Select the Choose File icon to upload a custom Reserved Image. (Utilize .Png
files ONLY that are 20 x 25 px or less.) The image will be displayed when the room
is reserved or in use at the selected time/date.
4. Select the Choose File icon to upload a custom Hot Desk Open Image. (Utilize
.Png files ONLY that are 20 x 25 px or less.) The image will be displayed when the
hot desk is available at the selected time/date.
5. Select Choose File to upload a custom Hot Desk Reserved Image. (Utilize .Png
files ONLY that are 20 x 25 px or less.) The image will be displayed when the hot
desk is reserved or in use at the selected time/date.
EMS Software © 2018 / V44.1 / Page 302
CHAPTER 70: Settings
MAPOPTIONS
1. Select the FloorPlanner header color from the Color Hex Value field. Select color
hex and enter the value number (e.g., http://www.w3schools.com/tags/ref_col-
orpicker.asp).
2. If enabled, the mouse scroll wheel allows a user to zoom in and out in FloorPlan-
ner. If disabled, the user utilizes the zoom in/out feature.
3. Enable or disable the Scroll Wheel Zoom option.
URLS
1. Enter the MeetingPlanner Web Services URL in the MPWS URL field. Use the
server network URL and MeetingPlanner (e.g., http://yourserver/meetingplanner_
ws/meetingplanner.asmx?wsdl).
2. Enter the MeetingPlanner Touch/Digital Room Sign URL in the MPTouch/Digital
Room Sign URL field. Use the server network URL and Meet-
ingPlannerTouch/Digital Room Sign (e.g., http://yourserver/mptouchor http://y-
ourserver\suite\sign\roomview.aspx?id= ).
EXCHANGEWEB SERVICES
Enable or Disable the ExchangeWeb Services option. The setting allows the
Floor Planner to integrate with ExchangeWeb Services.
EMS Software © 2018 / V44.1 / Page 303
CHAPTER 70: Settings
FORMS AUTHENTICATION
Enable forms authentication if applicable.
SAVE FLOORPLANNER SETTINGS
Select Save settings.
EMS Software © 2018 / V44.1 / Page 304
CHAPTER 70: Settings
CHAPTER 71: Access and ViewFloorPlanner1. Open the FloorPlanner using the URL provided by the Systems Administrator
(e.g.,http://yourserver/floorplanner).
2. Select Change Floor and dropdown to the desired floor. The Change Floor drop-
down list allows you to select which floorplan you would like to view. Selecting a
new floor clears the screen and displays the selected floor.
3. Adjust the view size using the (+/-) feature. Double click to zoom in on a particular
area.
NOTE: FloorPlanner defaults to Change Floor. From this default, there are no
Room Status Icons available even if a floor plan is shown. Rooms cannot be
reserved from this default.
EMS Software © 2018 / V44.1 / Page 305
CHAPTER 71: Access and View FloorPlanner
ROOMSELECTION
1. Select available room. Icons are used to indicate status as described in the table
below.
ICON DESCRIPTION
Available Rooms
Rooms In Session (therefore, NOT available)
EMS Software © 2018 / V44.1 / Page 306
CHAPTER 71: Access and View FloorPlanner
CHAPTER 72: Create Reser-vationUSING FORMS AUTHENTICATION
1. Enter your Windows log in credentials.
2. Use calendar to change date of reservation.
3. Use arrows to edit time of reservation.
4. Select Reserve.
EMS Software © 2018 / V44.1 / Page 307
CHAPTER 72: Create Reservation
USINGMEETINGPLANNERTOUCH
1. Select an Available room. Once a room is selected, the user is automatically taken
to the MeetingPlannerTouch (MPTouch) screen.
2. Select No Reservations from the Vacant Schedule window.
3. Select Available from Select a Free Time Slot window. FloorPlanner defaults and
displays room availability for current day.
EMS Software © 2018 / V44.1 / Page 308
CHAPTER 72: Create Reservation
4. Select a description of the type of meeting from Select a Title window.
5. Enter Username from Confirm Reservation window. MP credentials (e.g.,
Ted.Smith).
6. Enter Password from Confirm Reservation window.
MP Credentials
EMS Software © 2018 / V44.1 / Page 309
CHAPTER 72: Create Reservation
7. Select Return or Save.
8. Verify the following fields from the Confirm Reservation window:
Description—edit by selecting Descriptionfield. Enter desired description.
Start—edit by selecting Start field. Use +/- to adjust start time. Set start time. If user
accepts default start time, FloorPlanner automatically reserves meeting room within
the next 5 minute increment from the current time.
End—edit by selecting End field. Use +/- to adjust end time. Set end time.
Duration—edit by selecting Duration field.
9. Select Save. The room is reserved in MP unless there is no activity or Save is not
selected within the allotted time. If MPTouch “times-out” the reservation is not cre-
ated.
10. Select X to exit out of the reservation.
EMS Software © 2018 / V44.1 / Page 310
CHAPTER 72: Create Reservation
NOTE: All meetings and updates created in FloorPlanner synchronize with
MeetingPlanner software.
EMS Software © 2018 / V44.1 / Page 311
CHAPTER 72: Create Reservation
CHAPTER 73: FloorPlannerQuick ReferenceMeetingPlanner FloorPlanner allows users to quickly reserve and view avail-
able meeting rooms from a mobile phone or digital display. It synchronizes and
can be used in conjunction with Outlook/Exchange and all MeetingPlanner soft-
ware.
ACCESS AND VIEW MEETINGPLANNER
FLOORPLANNER
1. Open the FloorPlanner using the URL provided by the Systems Administrator
(e.g.,http://yourserver/floorplanner).
2. Select Change Floorand dropdown to desired floor.
3. Adjust the view size using the +/- feature. Double click to zoom in on a particular
area.
EMS Software © 2018 / V44.1 / Page 312
CHAPTER 73: FloorPlanner Quick Reference
ROOM SELECTION
1. Select available room. Icons are used to indicate status as described in the table
below.
ICON DESCRIPTION
Available Rooms
Rooms In Session (therefore, NOT available)
EMS Software © 2018 / V44.1 / Page 313
CHAPTER 73: FloorPlanner Quick Reference
CREATE RESERVATIONUSING FORMS AUTHENTICATION:
1. Enter your Windows login credentials.
2. Use calendar to change date of reservation.
3. Use arrows to edit time of reservation.
4. Select Reserve.
EMS Software © 2018 / V44.1 / Page 314
CHAPTER 73: FloorPlanner Quick Reference
USINGMEETINGPLANNERTOUCH
NOTE: All meetings and updates created in FloorPlanner synchronize with
MeetingPlanner software.
EMS Software © 2018 / V44.1 / Page 315
CHAPTER 73: FloorPlanner Quick Reference
CHAPTER 74: Installing RoomSignsTo install Room Signs using Meeting Planner, please refer to the Meeting Plan-
ner Installation Guide. This Guide will provide necessary information for
installing Meeting Planner including:
A Network Architecture Diagram
Hardware & Software Requirements, including a Hardware Requirements Checklist
Server 2012 and Server 2008 R2 Prerequisites Setup
Application Server Installation
Database Server Configuration
Back-end Application Configuration and Service Configuration
Steps for Installing Meeting Planner
Verification Information
Outlook Add-in Installation
EMS Software © 2018 / V44.1 / Page 316
CHAPTER 74: Installing Room Signs
CHAPTER 75: Pre-InstallationSQL Server
DATABASE SERVER PREREQUISITES AND
REQUIREMENTS
DATABASE SERVER
IMPORTANT: The application and database servers can be, but do not have
to be, the same.
PREREQUISITE DETAILS
SQL Server 2008 R2 and newer
EMS Software © 2018 / V44.1 / Page 317
CHAPTER 75: Pre-Installation SQL Server
PREREQUISITE DETAILS
Management Studio
Mixed Authentication Mode Enabled
Requirements SQL instance
SQL login
Restore Database
SQL SERVER
1. Open ‘Microsoft SQL Server Management Studio’ and Connect.
2. Enable Mixed Authentication Mode.
EMS Software © 2018 / V44.1 / Page 318
CHAPTER 75: Pre-Installation SQL Server
3. Right click on the server name in the ‘Object Explorer’ window.
4. Select Properties >Security.
5. Select SQL Server and Windows Authentication Mode and click OK.
EMS Software © 2018 / V44.1 / Page 319
CHAPTER 75: Pre-Installation SQL Server
RESTORE DATABASE
1. Open Microsoft SQL Management Studio.
2. Connect to the server that will hold the MeetingPlanner database.
3. Right-click on Database (Object Explorer, left pane) > Restore Database.
4. Set the name for the new database (“To database” field).
5. Select From device and click on the three dots to launch the folder browser.
6. Select Add, and the .bak you wish to restore. Link to MP backup database file
TBD.
7. Select OK.
8. Select Restore.
EMS Software © 2018 / V44.1 / Page 320
CHAPTER 75: Pre-Installation SQL Server
9. Select OK.
REQUIRED INSTALLATION DATA
Provide the MeetingPlanner Installer the following:
Database name (e.g., MeetingPlanner)
MeetingPlanner login and password credentials
EMS Software © 2018 / V44.1 / Page 321
CHAPTER 75: Pre-Installation SQL Server
IMPORTANT: The installation data is required to install MeetingPlanner.
EMS Software © 2018 / V44.1 / Page 322
CHAPTER 75: Pre-Installation SQL Server
CHAPTER 76: Installing RoomSignsTo install Room Signs using Meeting Planner, please refer to the Meeting Plan-
ner Installation Guide. This Guide will provide necessary information for
installing Meeting Planner including:
A Network Architecture Diagram
Hardware & Software Requirements, including a Hardware Requirements Checklist
Server 2012 and Server 2008 R2 Prerequisites Setup
Application Server Installation
Database Server Configuration
Back-end Application Configuration and Service Configuration
Steps for Installing Meeting Planner
Verification Information
Outlook Add-in Installation
EMS Software © 2018 / V44.1 / Page 323
CHAPTER 76: Installing Room Signs
CHAPTER 77: Complete theRoom Sign with Exchange Back-end Connection
ACCESS ROOM SIGNS APPLICATION
1. Access the Room Signs application at: http://<yourserver>/suite.
2. View the Users & Groups page (as in the image below) that will return, the first time
the Room Sign application is opened. To gain further access to the application, an
administrator profile must be setup.
SETUP ADMINISTRATOR PROFILE
(Application>Users&Groups)
Setup an administrator profile to gain access to the necessary settings to com-
plete the Room Sign with Exchange Connection.
EMS Software © 2018 / V44.1 / Page 324
CHAPTER 77: Complete the Room Sign with Exchange Back-end Connection
1. Select New User from the bottom right corner of the Users&Group page and com-
plete the basic user information to create a profile (using your Windows cre-
dentials).
2. Enter windows Login.
3. Enter Email address.
4. Enter Display Name.
5. Enter First Name. First name is not checked against AD.
6. Enter Last Name. Last name is not checked against AD.
NOTE: Ignore the additional user profile fields as they are not necessary.
7. Click on the ‘X’ next to System administrator two times until the icon is viewed.
8. Select Save.
EMS Software © 2018 / V44.1 / Page 325
CHAPTER 77: Complete the Room Sign with Exchange Back-end Connection
VIEW ROOM SIGN HOMEPAGE
http://<yourserver>/suite>Room Signs
EMS Software © 2018 / V44.1 / Page 326
CHAPTER 77: Complete the Room Sign with Exchange Back-end Connection
SETUP ROOM SIGN INTEGRATIONWITH
EXCHANGEWEB SERVICES
The settings below allow Room Signs and Software to integrate with Exchange
Web Services.
EWS
(Application>Integrations>EWS)
1. To integrate EWS, the MeetingPlanner Installer must have the following data from
the pre-installation. (Sever Setup and Configure Service Account):
EWS URL
EWS Service Account
EWS Service Account Domain and Password.
EMS Software © 2018 / V44.1 / Page 327
CHAPTER 77: Complete the Room Sign with Exchange Back-end Connection
2. Go to Application>Integrations>EWS from the Menu navigation icon and dropdown
menu).
3. Enter the EWS URL provided upon installation (e.g., https//ex-
change.acme.com/ews/exchange.asmx).
4. Enter the EWS Service Account provided upon installation. Please see the IT sup-
port member from your organization that installed EWS for service account inform-
ation.
5. Enter the EWS Service Account Domain.
6. Enter the EWS Service Account Password. Please see the IT support member
from your organization that installed EWS for service account password.
CONNECT TO EXCHANGE
(Application>Sign Configuration)
1. Go to Application>Sign Configuration from the Menu navigation icon and drop-
down menu.
2. Select Exchange from the Back-end Connection field dropdown.
3. Select Save.
EMS Software © 2018 / V44.1 / Page 328
CHAPTER 77: Complete the Room Sign with Exchange Back-end Connection
LOCATIONS & ROOM
(Hierarchy>Locations&Rooms>Edit room)
NOTE: Typically, organizations modify the Room Sign environment that
defaults upon install. Although, a room migration template is available for
large environments. Please open a support portal ticket to request a template
and script for data import if necessary.
GENERAL
(Hierarchy>Locations&Rooms> Edit room>General)
1. Select General.
2. Select the Edit icon next to the room to modify.
3. Go to Room Name field and customize the room name.
4. Select Save.
EXCHANGE
1. To integrate Exchange, the MeetingPlanner Installer must have the SMTP address
for each room.
2. Select Exchange.
3. Enable Room for Synchronization.
EMS Software © 2018 / V44.1 / Page 329
CHAPTER 77: Complete the Room Sign with Exchange Back-end Connection
4. Enter the SMTP Address. The address will allow the rooms to be pulled into the
user’s Outlook Calendar. Please see IT support member from your organization
that installed EWS for each room’s unique SMTP address.
5. Select Save.
EMS Software © 2018 / V44.1 / Page 330
CHAPTER 77: Complete the Room Sign with Exchange Back-end Connection
CHAPTER 78: Room Signs Con-figurationThe configuration of MeetingPlanner Room Signs and Software synchronizes
with the settings of all MeetingPlanner applications.
The MeetingPlanner Room Sign and Software Configuration Guide includes UI
setting information for Room Sign Software. All settings are accessed via Room
Sign or the Web Scheduler (e.g., http://yourserver/suite).
Use the icon and dropdown menu from the top right corner of the Room Sign or
Web Scheduler homepage to access the settings and customize the Room
Sign interface to fit the needs of your organization.
NOTE: Administration users with access (security permission) will be able to
access Room Sign settings and make configuration changes ONLY.
APPLICATION CACHE DISCLAIMER
The Room Sign setting changes are immediate and require no caching.
EMS Software © 2018 / V44.1 / Page 331
CHAPTER 78: Room Signs Configuration
CHAPTER 79: Customize RoomSign Environment - AdministratorThe designated Administrator can modify the MeetingPlanner Room Sign envir-
onment. To access the Room Sign application and make setting modifications
the following is needed:
A user profile with Administrator rights.
The Room Signs URL (e.g., http://<yourserver>/suite>Room Signs).
ACCESS ROOM SIGN SETTINGS
Use the Menu navigation icon and dropdown menu from the top right corner of
the Room Sign homepage to access the settings and customize the MP Room
Sign environment to fit the needs of your organization.
EMS Software © 2018 / V44.1 / Page 332
CHAPTER 79: Customize Room Sign Environment - Administrator
CUSTOMIZE BUILDING NAME
(Hierarchy>Locations&Rooms>Edit iconbuilding>General)
NOTE: A building and room migration template is available for large envir-
onments. Please open a support portal ticket to request a template and script
for import if necessary.
1. Select the Edit icon next to the building to modify.
2. Make modifications to fields. Building Name, Floor Name (alpha/ie. main), Phys-
ical Level.
3. Select Save.
ADD ROOMDETAILS
NOTE: Typically organizations modify the Room Sign environment that
defaults upon installation. Although, a building and room migration template is
EMS Software © 2018 / V44.1 / Page 333
CHAPTER 79: Customize Room Sign Environment - Administrator
available for large environments. Please open a support portal ticket to
request a template and script for import if necessary.
GENERAL
(Hierarchy>Locations&Rooms> Edit>General)
1. Select the Edit icon next to the room to modify.
2. Select the Building dropdown field and select the building that houses the room.
(Required)
3. Use the Floor dropdown menu and select the building level at which the room will
be located.
4. The Room Name to correlate with your organization should be entered. See Loca-
tions & Rooms. (Required)
5. Enter the lowest and highest number of attendees in the Capacity fields. (Optional)
Capacity information is displayed from the reservation page.
6. Select Save.
EMS Software © 2018 / V44.1 / Page 334
CHAPTER 79: Customize Room Sign Environment - Administrator
DESCRIPTION
(Hierarchy>Locations&Rooms>Edit room>Descriptions)
1. Select Descriptions.
2. Use the General Description text box to include information to be displayed from
the reservation page. (Optional)
3. Select Save.
ADD A BUILDING OR A ROOM
Additional buildings and rooms can be added to the Room Sign environment.
NOTE: Typically organizations manually enter additional buildings and
rooms to the Room Sign environment when necessary. Although, a building
and room migration template is available for large environments. Please open
a support portal ticket to request a template and script for import if necessary.
1. Go to Hierarchy>Locations&Rooms>+Building/+Room.
2. Select New Building/New Room.
GENERAL
1. Select General.
2. Enter building name, room name, and capacity.
EMS Software © 2018 / V44.1 / Page 335
CHAPTER 79: Customize Room Sign Environment - Administrator
DESCRIPTION (ROOMONLY)
1. Enter Description.
2. Use the General Description text box to include information to be displayed from
the reservation page. (Optional)
EXCHANGE (ROOMONLY)
(Hierarchy>Locations&Rooms>Exchange)
1. Select Exchange.
2. Enable Room for Synchronization.
3. Enter the SMTP Address.
4. Select Save.
IMPORTANT: Make sure to enable room for synchronization and enter
SMTP Address for each room added.
EMS Software © 2018 / V44.1 / Page 336
CHAPTER 79: Customize Room Sign Environment - Administrator
ROOM SIGN INTERFACE CONFIGURATION
(Application>Sign Configuration)
Configure the Room Sign and Software settings below when connecting to
Room Signs via Exchange.
GLOBAL SETTINGS
1. Select Exchange from the Backend Connection field dropdown.
2. Select the desired form of user Authentication from the dropdown field.
3. Enter the desired Default Subject. The default subject will populate when a user
reserves a room. The end user can edit the subject when creating a reservation.
4. Enter the desired Help Message. This message will appear when a user selects
the requests help icon.
IMPORTANT: The Help Message and Request Icon will ONLY appear in
rooms in which a help email address has been entered in the Custom Field
Value field.
EMS Software © 2018 / V44.1 / Page 337
CHAPTER 79: Customize Room Sign Environment - Administrator
THEME
LOGO
5. Select Choose File to upload a ‘Logo’ image. Use PNG file.
AVAILABLE ROOM
6. Select the Available Room field and choose a color to display when a room is
available.
7. Choose File to upload an ‘Available Room’ image. Image display overrides color
selection. In other words, if both color and image are selected, ONLY the image
EMS Software © 2018 / V44.1 / Page 338
CHAPTER 79: Customize Room Sign Environment - Administrator
will display.
8. Clear Image to remove the ‘Available Room’ image.
IN PROGRESS MEETING
9. Select the In Progress Meeting field and choose a color to display when a room is
being used.
10. Choose File to upload an ‘In Progress Meeting’ image. Image display overrides
color selection. In other words, if both color and image are selected, ONLY the
image will display.
11. Clear Image to remove the ‘In Progress Meeting’ image.
FUTURE MEETINGS (USER HAS NOTCHECKED-IN)
12. Select the Future Meetings field and choose a color to display a reservation in the
future.
13. Choose File to upload a ‘Future Meeting’ image. Image display overrides color
selection. In other words, if both color and image are selected, ONLY the image
will display.
14. Clear Image to remove the ‘Future Meeting’ image.
RESERVATION EDITOR
15. Select the Reservation Editor field and choose a color to display from the reser-
vation editor page.
EMS Software © 2018 / V44.1 / Page 339
CHAPTER 79: Customize Room Sign Environment - Administrator
16. Choose File to upload a ‘Reservation Editor’ image. Image display overrides color
selection. In other words, if both color and image are selected, ONLY the image
will display.
17. Clear Image to remove the ‘Reservation Editor’ image.
CHECK IN/OUT
18. Enable Check In/Out field to allow a user to check in or out of a meeting using
MeetingPlanner Room Signs and Software.
19. Enter the minutes allowed before the meeting in which a user is able to check in.
20. Enter the minutes allowed after the meeting has ended in which a user is able to
check out.
21. Select Save.
OVERRIDE GLOBAL SETTINGS IN IDENTIFIED
ROOMS
Rooms that require settings other than the global settings entered above can be
changed from the ‘Custom Field’ page of the identified room.
CUSTOM FIELDS
(Hierarchy>Locations&Rooms>Edit room>Custom Fields)
EMS Software © 2018 / V44.1 / Page 340
CHAPTER 79: Customize Room Sign Environment - Administrator
Settings that can be customized, by room, include:
Check-in After Window (enter field value in minutes)
Check-in Before Window (enter field value in minutes)
Check-in Enabled (enter 1 true or 2 false)
Default Subject (enter subject [e.g., Staff Meeting] in field value)
Free Color (enter HEX color)
Help Email Address in Custom Field Value (enter helpdesk email [e.g., john.-
[email protected]] in field value)
Help Message (the message entered in field value will appear from the Room Sign
reservation window once the the Request Help icon is selected)
Future Color (enter HEX color)
In Progress Meeting Color (enter HEX color)
To modify the custom field settings room by room:
1. Select Custom Fields.
2. Select Edit/Delete next to the setting to be modified.
3. Enter the new Custom Field Value.
4. Select Update and Save.
EMS Software © 2018 / V44.1 / Page 341
CHAPTER 79: Customize Room Sign Environment - Administrator
EMS Software © 2018 / V44.1 / Page 342
CHAPTER 79: Customize Room Sign Environment - Administrator
CHAPTER 80: Room Signs QuickReferenceMeetingPlanner Room Signage and Software allows users to quickly reserve
and view room availability. It synchronizes and can be used in conjunction with
Outlook/Exchange and all MeetingPlanner software.
ROOM SIGN AND SOFTWARE APPLICATION
1. Open the MeetingPlanner Room Sign Application using the URL provided by the
Systems Administrator (e.g., http://yourserver/Suite).
CREATE RESERVATION
If the room is immediately available, the digital screen is green in color (default
color). The hours and minutes prior to the next meeting in the room are also dis-
played.
If the room is occupied, the screen is red (default color). The hours and minutes
remaining until the room is vacant are displayed.
1. Select Available or Find a Room from the touchscreen.
2. Enter the Username and Authenticate.
3. Use the +/- to set the Start and End time of the meeting.
EMS Software © 2018 / V44.1 / Page 343
CHAPTER 80: Room Signs Quick Reference
4. Enter the Subjectof the meeting.
5. Select Save.
NOTE: Additional resources can be added to a reservation using either the
Web Scheduler or Add-in MeetingPlanner application. (All resource cut-off
times will apply.)
CHECK IN
Once the room is reserved, check in to confirm the reservation.
1. Select the meeting created from the window on the right side of the screen.
2. Authenticate by using either:
Username, or
Reservation id.
The reservation id number is provided once the reservation is created.
MODIFY A ROOM RESERVATION
Check out of a meeting room that ends early or delete a reservation to make the
room available to other users.
EMS Software © 2018 / V44.1 / Page 344
CHAPTER 80: Room Signs Quick Reference
1. Select the meeting from the window on the right side of the screen.
2. Use the +/- to edit the Start and End time of the meeting or Delete to cancel it.
NOTE: All meetings and updates created using Room Sign Software syn-
chronize with other MeetingPlanner Software applications.
EMS Software © 2018 / V44.1 / Page 345
CHAPTER 80: Room Signs Quick Reference
CHAPTER 81: Exchange Sync,Appointment Fields Accessed inPush
ADDStart and End Date
Subject—From Meeting Planner Reservation. Creates default one if left blank
Body—Will write "Meeting Planner Reservation ID nnn" label only
SentOnBehalfOf (often displayed as Organizer)—Meeting Planner sends in the User
Name of the Reservation Owner. If not valid, field is left to default value, the mailbox
account itself.
User Properties, Res_ID and Room_Res_ID
UPDATEStart and or End Date
User Properties, Res_ID and Room_Res_ID—Only if not yet in the Appointment
EMS Software © 2018 / V44.1 / Page 346
CHAPTER 81: Exchange Sync, Appointment Fields Accessed in Push
CHAPTER 82: Manually Con-figure Outlook to Connect withProxyFirst make sure you meet the minimum software requirements and followed all
the instructions from Microsoft. Most of the time, if you followed Microsoft's
instructions (http://help.outlook.com/en-us/140/m-
s.exch.ecp.useoutlookanywhere.aspx) for configuring your domain for Office
365, your users should be able to connect to Exchange Online without any
issues. If you do have issues with Outlook refusing to autodiscover the settings
it needs to connect to Exchange Online, follow the directions below.
DETERMINE YOURMAILBOX SERVER NAME AND PROXY
SERVER URL
a. Sign in to the Office 365 (if applicable) portal.
b. Click Outlook to open Microsoft Outlook Web App.
c. In the upper-right corner of the page, click the Help icon (the question mark), and
then click About.
d. On the About page, locate and then note the Host address.
EMS Software © 2018 / V44.1 / Page 347
CHAPTER 82: Manually Configure Outlook to Connect with Proxy
CREATE AN MAILBOX PROFILE
a. Click Start, click Control Panel, and then click Mail.
b. Click Show Profiles and then click Add.
c. Type a name for the profile, and then click OK.
MANUALLY CONFIGURE SERVER SETTINGS
a. Click on the check box and then click Next.
b. Select Microsoft Exchange, and then click Next.
MICROSOFT EXCHANGE SETTINGS
a. In the Server box, type the host address that you noted in step 1d.
Note: This name should be the first 10 characters of the host address together
with "mailbox.outlook.com" If the host address is "ch1prd0610.outlook.com/owa,"
use "ch1prd0610.mailbox.outlook.com".
b. Make sure that the Use Cached Exchange Mode option is selected.
c. In the User Name box, type your user name (e.g., [email protected]).
d. Click More Settings.
MICROSOFT EXCHANGE CONNECTION SETTINGS
Check "Automatically detect connection state" and then click Apply.
EMS Software © 2018 / V44.1 / Page 348
CHAPTER 82: Manually Configure Outlook to Connect with Proxy
MICROSOFT EXCHANGE PROXY SETTINGS
a. Click the Connection tab.
b. Make sure that the Connect to Microsoft Exchange using HTTP check box is
selected, and then click Exchange Proxy Settings.
c. In the Use this URL to connect to my proxy server for Exchange box, type the host
address that you noted in step 1d.
Note: Enter the host address without the "/owa".
d. Make sure that the Only connect to proxy servers that have this principal name in
their certificate check box is selected, and then type msstd:outlook.com.
e. Click to select the On fast networks, connect using HTTP first, then connect using
TCP/IP check box, and then click to select the On slow networks, connect using
HTTP first, then connect using TCP/IP check box.
f. Under Proxy authentication settings, select Basic Authentication.
g. Click OK two times.
h. Click Check Names. When the server name and the user name are displayed
with an underline, click Next.
i. Click Finish.
EMS Software © 2018 / V44.1 / Page 349
CHAPTER 82: Manually Configure Outlook to Connect with Proxy
CHAPTER 83: Service AccountRequirements & Uses
REQUIRED PERMISSIONS
EXCHANGE
The account will require a mailbox on the Exchange server and permissions for
the resources and user accounts that the Exchange Sync service will be acting
upon.
There are two different privileges that can be granted to the service account for
each mailbox that needs to be managed by Exchange Sync:
1. Calendar Permission: Granting "Editor" level delegate permissions will be suf-
ficient to allowing the Exchange Sync service to create and modify meetings only;
the service will not be able to delete meetings from the calendar. In a standard
Exchange 2010 environment, this would be accomplished by running the following
command in the Exchange Management Shell.
a. Add-MailboxFolderPermission—Identity UserOrRoom:\Calendar -User
ServiceAcct -AccessRights ReadItems,EditAllItems,DeleteAllItems
2. Deleted Items Permission: Granting "Contributor" permissions to the 'Deleted
Items' folder will allow the Exchange Sync service to create, modify, and delete
meetings; without these permissions, the service will only be able to create and
EMS Software © 2018 / V44.1 / Page 350
CHAPTER 83: Service Account Requirements & Uses
modify meetings on the calendar. In a standard Exchange 2010 environment, this
would be accomplished by running the following command in the Exchange Man-
agement Shell.
a. Add-MailboxFolderPermission—Identity UserOrRoom:"\Deleted Items" -User
ServiceAcct -AccessRights CreateItems
NOTE: "Moves" and "deletes" do not automatically send out notifications to
invited users; these will need to be done manually by the user.
APPLICATION SERVER
The account will also require Local Administrator access on the application
server, and "Log on as a batch job" permissions:
Local Administrator (Start > Administrative Tools > Computer Management)
Log on as a batch job (Start > Administrative Tools > Local Security Settings)
ADDITIONAL REQUIREMENTS
The account will need to access the Exchange server from the application
server, so there cannot be a Group Policy, Firewall, or Proxy that will prevent
this from happening.
EMS Software © 2018 / V44.1 / Page 351
CHAPTER 83: Service Account Requirements & Uses
ACCOUNTUSES
MeetingPlanner Exchange Sync service Log On account (Start > Administrative Tools
> Services).
Will be entered in the MeetingPlanner Configuration Tool on the application server
("Exchange Sync" tab).
Will be entered into the MeetingPlanner Web > Setup > General Settings > Room
page as well. This will be the account used to create tasks, which will be used to
send meeting conflict notifications.
SECURITY
Once entered into MeetingPlanner, the service account name and password
will be encrypted and stored in two configuration files located on the Meet-
ingPlanner application server.
EMS Software © 2018 / V44.1 / Page 352
CHAPTER 83: Service Account Requirements & Uses
CHAPTER 84: User (v5.5.0.20-current)
PRE-INSTALLATION PREPARATIONSThere needs to be an account in Exchange that we will refer to as the Service
Account
We recommend a separate Exchange account that is not used for any
other purpose, but Exchange Sync will support using an existing account.
This account will need to have an Exchange mailbox, and exist in AD.
This account will need Exchange "Full Access" permissions to all the
Room Resources and User Calendars being synced.
Inadequate permissions will often result in “Can’t access resource” type
errors in the Exchange Sync processes, and many others. These will typ-
ically occur when attempting to read data from Exchange.
The Service Account should be in the Administrators group on the Meeting
Planner Server.
During the Administration and Set Up of Exchange Sync, the person performing
these functions will need to know the windows Log On credentials of the Service
Account.
To test the Pull process, and to view Push process results, you will need access
to the Exchange Resources being tested, either through Outlook or other UI.
EMS Software © 2018 / V44.1 / Page 353
CHAPTER 84: User (v5.5.0.20-current)
Meeting Planner Web and Client should be up and running before starting
Exchange Sync set-up.
It is recommended that you create a Meeting Planner User that will be used only
for Exchange Sync purposes. This does not need to be linked to a actual User in
the domain and is not used on the Exchange end at all. It's main purpose is to
show in the Reservation Log, that the Sync Service made the change, not a per-
son using Meeting Planner.
MAPI CDO needs to be installed on MP Server. Typically, this will not be
installed. If your Exchange Server version is above 2010, you may need to install
the Oulook MAPI library instead. This is part of the Office Set-Up install. Down-
load: http://www.microsoft.com/en-us/download/details.aspx?id=1004
The .NET 4.0 Framework is required on the MP Server. http://www.-
microsoft.com/en-us/download/details.aspx?id=17851
If there are issues connecting to the Exchange Server, try the MFC MAPI tool. It
can be found at http://mfcmapi.codeplex.com/.
INSTALLATION INSTRUCTIONSIt is recommended that someone from EmergingSoft assist in the initial install-
ation and set-up.
Run the Install. Choose Custom, and select Exchange Sync in the module selec-
tion screen.
Go into the Services Window. Check that the Exchange Sync Service is in the list.
If it has started already, stop it for now.
EMS Software © 2018 / V44.1 / Page 354
CHAPTER 84: User (v5.5.0.20-current)
The Log On for the Pull Service needs to be changed to the Service Account.
Sometimes, if you view the service’s Properties - Logon, it may appear that the
correct credentials are in there. You should re-enter them anyway. If this is set to
Network Service or to a weak account, the error you see will include the code
WSAECONNRESET.
Complete the Meeting Planner Config Tool steps (see Meeting Planner Con-
figuration Tool Entries below.
Complete / Check the Exchange Sync related entries in Meeting Planner Web.
(see Meeting Planner Web Entries below)
Start the Exchange Sync Service. If it will not start at all, it is likely that the 4.0
.NET Framework is not installed on the Meeting Planner server.
MEETING PLANNER CONFIGURATION TOOL
ENTRIESOpen the Meeting Planner Configuration Tool.
The database connection information used by the Web Site and Web Service
(Database tab) is also used by the Exchange Sync windows service. If this is not
yet filled in, it needs to be completed at this time.
Go to the Exchange Sync tab for the remainder of the entries.
Exchange Store Address - This is the machine name of the Exchange Server
being synced to. Often of the form mail.DomainName.com. This and the next field
represent one of two ways that the Credentials can be passed to Exchange.
It needs to be set to the specific Exchange node.
EMS Software © 2018 / V44.1 / Page 355
CHAPTER 84: User (v5.5.0.20-current)
Exchange User Name - This is the account name of the Service Account. If all
four fields are filled in, this is the field / log-in method that will be used. It is usually
domain-specified ex. Domain Name\Service Account Name
Profile Name - This is the name of the profile that will be used to access
Exchange Server (Service Account). This and the password below can be used
instead of Exchange User Name. In Office 365, and other environments, this is
the only option. The profile needs to be created under the service account. If
using a Proxy, the proxy address needs to be added to the profile.
Profile Password - The password for the Profile above. This parameter is only
used by the PST provider if the PST store is protected with a password. This is
NOT a Windows account password.
Pull Service Process Interval - This is the amount of time, in number of minutes,
between the end of one Exchange Sync Service process cycle and the start of the
next. Should be set to at least 1.
Days Back to Pull - This is the number of days back you want the Pull service to
search for appointments. It will look at the Modification Date. If you enter 14, for
example, you will receive every changed appointment from the last two weeks.
For the initial load, you may want to set this to a higher number, to get appoint-
ments that were scheduled far in advance, and then set it back to 7-14. If this is
set to a higher number after the initial sync, you will need to "Force Fresh Pull of
Exchange Data", the button found in Meeting Planner Web - Setup - Rooms -
<navigate to room> or the Meeting Planner Web - Setup - Users and Groups -
<navigate to user>.
EMS Software © 2018 / V44.1 / Page 356
CHAPTER 84: User (v5.5.0.20-current)
Debug Level - This is a number, 0 - 2, that determines how many entries are cre-
ated in the Event Viewer. 2 is very verbose, and should generally just be used
when troubleshooting issues. 1 is the default, and provides enough information to
monitor if it is running smoothly. 0 is quite limited, and should only be used when
the system has been stable for a while, or if there are people looking at the Event
Viewer that tend to be alarmed by the quantity, or nature, of the informational
entries.
Limited Search Mode - If this flag is checked, when Exchange Sync searches for
Appointments to Push, it will only use a type of search. Otherwise, if that first
search fails, it has secondary ones it can use. The secondary searches are gen-
erally only needed for specific situations, but they do make the system more
robust. It is best to first try running with this flag unchecked, and only try the other
mode if recommended by an EmergingSoft Support Specialist.
EXCHANGE SYNC SET-UP ENTRIES FROM
MEETING PLANNERWEB
These entries will usually only need to be done during set-up.
Setup – General Settings – bottom of Room tab
Enable Exchange Sync Pull Functionality - Checking this will enable all Pull
(from Exchange to Meeting Planner) operations.
EMS Software © 2018 / V44.1 / Page 357
CHAPTER 84: User (v5.5.0.20-current)
Meeting Planner Exchange Sync User Name – A valid Meeting Planner Login
Name, as seen on the General Settings - Users & Groups - User List. This will be
the User used for the Reservation Log and new Pull Reservations. It should also
be a member of at least one group. It’s considered best practice to use a separate
User, one assigned to a single Group, but this is not enforced, and any valid User
Name can be used.
Enable Exchange Sync Push Functionality - Checking this will enable all Push
(from Meeting Planner to Exchange) operations.
Maximum # of Pushes that will be processed per batch - This is the number of
Pushes that the Sync Service will attempt per cycle. There can be times where
doing too many at once will cause intermittent Exchange connection errors. Redu-
cing this number will reduce the chances of those types of errors. Increasing the
number will allow the Pushes to be done in a more timely manner. After initial set-
up, this setting will generally not need to be changed
Email Notice Task Account User Name - This is the Account Name used by the
process that sends the Email Notifications. This does not need to be the service
account, but just an account that has permissions to send emails.
Email Notice Task Account Password - This is the password for the windows cre-
dentials described above. The password will not be displayed. If there is a value
saved you will see the message "Password Saved" to the right of the entry text
box.
For each Room: Setup – Rooms – Navigate to each Room to be Synchronized:
EMS Software © 2018 / V44.1 / Page 358
CHAPTER 84: User (v5.5.0.20-current)
Go to the Exchange Tab / Frame
Check “Enable Room for Synchronization” Flag to enable room for Push and or
Pull processes
Enter default SMTP address in “SMTP Address”. If there are problems with this
value, it should be reported in the Event Viewer - Log - Application when the
Exchange Sync Service is running.
Use the “Cancel” and “Save” buttons at the bottom of the page as you would any
Room Set-Up data.
For Each User Calendar: Set-Up - Users and Groups to be Synchronized:
Navigate to the User who owns the Calendar being Synchronized
Use the “Synch User’s Mailbox” Flag to enable or disable the link to the
Exchange Account Calendar.
RUNNING EXCHANGE SYNC SERVICE AND
CHECKING THE RESULTS
The Event Viewer on the server where the Pull Service is running will have
entries made in its Application Log section. You can filter the log on
ExchangeSync to see only the ones related to Exchange Sync Pulls or Pushes.
The amount of detail is controlled by the "DebugLevel" set in the Sync Service
config file. 0 is the least verbose, 3 the most.
EMS Software © 2018 / V44.1 / Page 359
CHAPTER 84: User (v5.5.0.20-current)
When the service is first started, you will see “Exchange Sync started. The Sync
process is configured to run every 15 minutes.” (where configuration file setting
Exchange Sync Interval Minute is set to 15)
The first process message is “Starting Sync Process”.
The Room Pull, User Pull, and Pushes are processed on separate threads. The
Event Viewer entries may be intertwined. The Room Pull threads will have Event
IDs starting with 100, the User Pull threads start with 200, and the events for Push
will always be 3.
The Pull processes will go through Mailboxes configured to sync to Pull, looking
for recent changes from the mailbox. Before it starts, the message will be of the
form: Looking for changes in 1. First Mailbox Name 2. Second Mailbox Name ....
If it finds appointments to be processed by Meeting Planner for that mailbox, you
will see a message such as: Starting processing of 1 Appointments from First Mail-
box
Depending on the Debug Level, and if any processing errors occurred, there
could be errors, warnings, or information messages displayed.
When it has completed the Meeting Planner side of the processing, a message
will be displayed such as: The Following Meetings were processed: [Update 'Sub-
ject of first one' Sun 07 Apr 2013 10:00 GMT] [...
The Push requests will be processed at t same interval as the Pulls. The number
of requests it processes in one batch is controlled by the General Setting, "Max-
imum # of Pushes that will be processed per batch".
EMS Software © 2018 / V44.1 / Page 360
CHAPTER 84: User (v5.5.0.20-current)
Depending on the Debug Level each attempt will be shown, or only successful
ones. In either case, it will write an entry such as, "Attempting Create Push to Mail-
box 'room3', Start Date: Mon, 23 Jan 2012 11:00:00 GMT.”
The error details can be “friendly”, example - Room 231 reserved for 2012 Jan 12
11:30:00 GMT” or quite cryptic. The cryptic ones are generally connection or other
Exchange issues, while the friendly ones are MP business rules that were
broken, most commonly, the MP Room is already reserved for the time the Pull is
trying to add.
The Exchange Sync Service will not stop itself when errors occur. Since the data
was never processed, it will not be lost. During the next cycle of the Service, the
changes will still be there, plus any that have occurred since then.
The Reservation Log in Meeting Planner will show all the data-affecting steps
performed by the Pull process. This will show Adds, Update, Delete, and
Conflict information. A sample is shown below.
TRIGGERING AND CHECKING PUSH RESULTS
The UI trigger for the Push Functionality is anything that will Add, Change, or
Delete a Room Reservation using the Meeting Planner Web Services.
The change should have triggered the creation of a Push Request that will be
picked up by the Exchange Sync Service (see section E). Changes done this way
will be at the to pof the list, in front of the internal Push requests created by the
EMS Software © 2018 / V44.1 / Page 361
CHAPTER 84: User (v5.5.0.20-current)
Pull process.
Subject arriving Blank or Changed
In Outlook / Exchange, the Subject that ends up in the Invited Resource's
Appointment can be different than the Organizer (Inviter) Appointment's Sub-
ject. It gets changed based on rules in Exchange Resource Booking Attendant.
In the Pull Service, when a MP Reservation is created from a Resource, it is the
Resource's Subject that is being used for the MP Res Subject.
The Reservation Log can be checked against the Exchange Appointment.
The Reservation Log logs all such changes done to Room Reservations. To spot-
check if the Push worked, you would check the Reservations involved in recent
activity, filtered by a Room set up for Synchronization.
Connect to that Exchange mailbox and see if you see the changes to the Appoint-
ment.
TROUBLESHOOTING CONNECTION ISSUESWITH
EXCHANGEEnsure that the Exchange Store Address field in the MP Config Tool is an
address that MAPI can resolve. This may not be the same address that is used by
Outlook OWA.
EMS Software © 2018 / V44.1 / Page 362
CHAPTER 84: User (v5.5.0.20-current)
The identity of the domain Windows user used by the Exchange Sync Pull Ser-
vice (LogOn tab) must be able to access all the mailboxes that you need to pro-
cess.
On the MP Server, make sure that the user was added to the local users and has
sufficient local rights.
Check that the mail address entered in the Meeting Planner Configuration
Tool will resolve in a browser opened on the Meeting Planner server.
For any Error on the CheckChanges call of the Pull, Go into that Room or User in
MP Admin and click on the "Force Fresh Pull of Exchange Data" button.
If IPv6 is enabled on Windows 2008, that can cause problems connecting to the
Exchange Server.
Could there be a firewall blocking access?
To test connection, try creating a new Outlook profile on the MP Server, while
logged into the domain as the Service Account.
EMS Software © 2018 / V44.1 / Page 363
CHAPTER 84: User (v5.5.0.20-current)
CHAPTER 85: API ReservationFee (XML "Drop") Introduction
BACKGROUND
The Reservation Feed is a simple commandline utility that can be setup in the
Task Scheduler to run at a specified interval. Each time the utility is run, it will
convert data from a view in the MeetingPlanner database into an xml file that
can be saved to disk or uploaded to an FTP site.
The feed is typically used for custom digital signage, where the reservation
times, subject, room, and organizer information need to be displayed.
However, the database view can be customized to include any / all required
information, and can be filtered to show reservations for "today," "this week,"
etc.
Notable features:
DateTimes will be converted to a specified timezone (or can be left in UTC).
The output DateTime format can be specified.
Output information can be customized based on what is captured in the DB view.
EMS Software © 2018 / V44.1 / Page 364
CHAPTER 85: API Reservation Fee (XML "Drop") Introduction
SAMPLE OUTPUT
<?xml version="1.0" standalone="yes"?>
<DocumentElement>
<reservation>
<StartTime>2013-03-05 04:15</StartTime>
<EndTime>2013-03-05 05:15</EndTime>
<Subject>Test Meeting with Setup</Subject>
<RoomName>Room 101</RoomName>
<FloorName>Main</FloorName>
<FloorNumber>1</FloorNumber>
</reservation>
<reservation>
<StartTime>2013-02-06 01:00</StartTime>
EMS Software © 2018 / V44.1 / Page 365
CHAPTER 85: API Reservation Fee (XML "Drop") Introduction
<EndTime>2013-02-06 01:30</EndTime>
<Subject />
<RoomName>TestRoom</RoomName>
<FloorName>Main</FloorName>
<FloorNumber>1</FloorNumber>
</reservation>
<reservation>
<StartTime>2013-02-06 11:30</StartTime>
<EndTime>2013-02-07 12:00</EndTime>
<Subject />
<RoomName>A123</RoomName>
<FloorName>Main</FloorName>
EMS Software © 2018 / V44.1 / Page 366
CHAPTER 85: API Reservation Fee (XML "Drop") Introduction
<FloorNumber>1</FloorNumber>
</reservation>
<reservation>
<StartTime>2013-02-06 11:15</StartTime>
<EndTime>2013-02-07 12:15</EndTime>
<Subject />
<RoomName>Room 101</RoomName>
<FloorName>Main</FloorName>
<FloorNumber>1</FloorNumber>
</reservation>
</DocumentElement>
EMS Software © 2018 / V44.1 / Page 367
CHAPTER 85: API Reservation Fee (XML "Drop") Introduction
CHAPTER 86: API ReservationFee (XML "Drop")Installation & Configuration
PREREQUISITESMeetingPlanner
.NET 4.0
INSTALLATION
1. Download and extract the following zip file here.
2. These files can be placed in their own folder within the ...\Emergingsoft folder on
the application server.
3. Create a new View in the MeetingPlanner database, called "PublicReservations,"
containing the information you will want in the feed. (Example can be found here)
4. Create a new task in the Task Scheduler
GENERAL
Name the task and set the account to run under.
EMS Software © 2018 / V44.1 / Page 368
CHAPTER 86: API Reservation Fee (XML "Drop") Installation & Configuration
TRIGGERS
Set the run interval for the process.
ACTIONS
Select the application that should be run. If you simply want to save the .xml file
to disk, select the "ReservationFeed.exe" that is part of the zip file you pre-
viously downloaded. If you require an FTP upload, please select the "Gen-
erateAndUploadFeed.bat" file, which is also included in the zip (configuration
options are laid out below).
CONDITIONS & SETTINGS
These can be left with default settings. Feel free to change any of these options
as desired.
XML CONFIGURATION
All configuration options can be set within the ReservationFeedCmd.exe.config
file. Please see below for descriptions of each configuration option:
EMS Software © 2018 / V44.1 / Page 369
CHAPTER 86: API Reservation Fee (XML "Drop") Installation & Configuration
DSN: This can be copied from your ...\MeetingPlannerWeb\web.config
FilePath: Where the xml file should be saved to disk (include a "\" at the end of the
path). Note: file will be saved as "MeetingPlanner.xml.
TimeZoneCode: Three letter abbreviation for the timezone that the reservation times
should be converted to (ie "EST" for Eastern Time). Columns in the DB view that are
titled "Start" or "End" will be converted using this timezone code.
DateTimeFormat: The format for the datetimes that are returned. Format values should
be found from the .NET site: http://msdn.microsoft.com/en-us/library/8kb3ddd4.aspx
FTP CONFIGURATION (IF NEEDED)
The FTP configuration is all setup within the "GenerateAndUploadFeed.bat"
file. You will see the following items in the file (edit with Notepad):
FTPUserName_Replace: Replace with the FTP username setup for the .xml drop
FTPPassword_Replace: Replace with the FTP password setup for the .xml drop
/FTP/File_Path_Replace: Replace with the file path to where the .xml file should be
uploaded to ("/" is the root directory)
FTPServerIP_Replace: Replace with the IP address of the FTP server
EMS Software © 2018 / V44.1 / Page 370
CHAPTER 86: API Reservation Fee (XML "Drop") Installation & Configuration
CHAPTER 87: Crestron FusionDigital SignageThis guide provides an overview of product features and related technologies.
In addition, it contains recommendations on best practices, tutorials for getting
started, and troubleshooting information for common situations.
EMS Software © 2018 / V44.1 / Page 371
CHAPTER 87: Crestron Fusion Digital Signage
CHAPTER 88: Installation andConfiguration Guide
SETUP NEW MEETINGPLANNER CUSTOM FIELD
1. Go to MP Web > Setup > Code Tables > Room Custom Fields (dropdown) > Insert
New Record.
2. Set the item Value to "ZZ1" (or similar) and the Item Description to "Crestron Room
ID."
SET CRESTRON ROOMS TO 'ROOMVIEW' MODE
1. From the Crestron Fusion Setup page, edit the room(s) you wish to link to Meet-
ingPlanner.
2. Go to "Scheduling Details" and select "RoomView."
ALTERNATIVE: Run the following SQL command against the Crestron data-
base to enable this mode for all rooms.
3. UPDATE CRV_Rooms SET GroupwareProviderType = 'Internal' WHERE Type =
'Room'
EMS Software © 2018 / V44.1 / Page 372
CHAPTER 88: Installation and Configuration Guide
GET CRESTRON ROOMID'S
1. Run the following SQL command against the Crestron database. SELECT
r.RoomID, r.RoomName FROM CRV_Rooms r WHERE r.Type = 'Room'
2. Note the RoomID for the room(s) that you would like to integrate with Meet-
ingPlanner.
LINK THE CRESTRON ROOMIDS TO THE
APPROPRIATEMEETINGPLANNER ROOMS
1. Go to MP Web > Setup > Rooms > [select building] > [select room to link] > Custom
Fields.
2. Enter the Crestron Room ID into the custom field that was created in Step 2.
ALTERNATIVE: Convert a csv file containing Crestron RoomID's and Meet-
ingPlanner Room Names to a SQL script, to be run against the Meet-
ingPlanner database.
i. Complete the template, making sure that there are no extra "columns" or
"rows."
ii. Run the linked PowerShell script with the csv template as the only parameter.
> CrestronRoomImport.ps1 CrestronRoomImport.csv > Meet-
ingPlannerImport.sql
EMS Software © 2018 / V44.1 / Page 373
CHAPTER 88: Installation and Configuration Guide
DOWNLOAD THE SYNCHRONIZATION
APPLICATION
1. Download the latest program files.
2. Extract the files into a new folder in the ...\EmergingSoft folder on the application
server. The rest of this guide will assume the files were extracted into the ... \ Emer-
gingSoft \ Crestron Sync folder.
CONFIGURE THE APPLICATION / DATABASE
CONNECTIONS
NOTE: This step is to be done when Meeting Planner is not in use.
1. Open the ...\ EmergingSoft \ MeetingPlanner_WS \ web.config file.
2. Copy the value of the "DSN"
3. Paste the copied value into the ... \ EmergingSoft \ Crestron Sync \ Meet-
ingPlannerCrestronIntegrationService.exe.config file as the "MeetingPlannerDSN"
value, replacing the existing value.
4. Open the MeetingPlanner Configuration Tool to the Database tab.
5. Update the tab to include all information related to the Crestron Fusion database
(Server, Database, SQL Login, Password).
6. Save.
7. Open the ...\ EmergingSoft \ MeetingPlanner_WS \ web.config file.
8. Copy the value of the "DSN"
EMS Software © 2018 / V44.1 / Page 374
CHAPTER 88: Installation and Configuration Guide
9. Paste the copied value into the ... \ EmergingSoft \ Crestron Sync \ Meet-
ingPlannerCrestronIntegrationService.exe.config file as the "CrestronFusionDSN"
value, replacing the existing value.
10. Open the MeetingPlanner Configuration Tool to the Database tab.
11. Reset the information to reflect MeetingPlanner database information.
12. Save.
FINALIZE APPLICATION CONFIGURATION
1. Open the the ... \ EmergingSoft \ Crestron Sync \ Meet-
ingPlannerCrestronIntegrationService.exe.config file.
2. Make sure the "CrestronRoomIdCode" value is set to match the custom field code
that was created in Step 1b (above).
3. Set the "TraceLevel" to "Error" (if it isn't already).
4. Set the "LogPath" to the folder that you would like application logs to be written to.
A typical path may be "C:\Temp\MeetingPlannerLogs\"
NOTE: Ensure the path ends with a " \ " character.
5. Save and close.
8) ESTABLISH THE APPLICATION AS A SERVICE
a. Run the following command to setup the application as a service:
EMS Software © 2018 / V44.1 / Page 375
CHAPTER 88: Installation and Configuration Guide
> sc create MeetingPlannerToCrestronIntegration binpath= "C:\Program Files
(x86)\EmergingSoft\Crestron Syn-
c\MeetingPlannerCrestronIntegrationService.exe"
* Update the file path as necessary
** Make sure there is a space between 'binpath=' and the file path
b. Update the service's Log On account and auto start options as desired.
NOTE: Emergingsoft recommends running the service under the local system
account. If another account is used, please make sure the account has full
access to the log path, as well as to the application files.
c. Start the service.
OPTIONAL: "MIGRATE" EXISTING RESERVATIONS
The service is designed to run based off of a "transaction log" in Meet-
ingPlanner, and will synchronize any action that happens in MeetingPlanner
from the point the service is started, forward. If there are already reservations in
MeetingPlanner that should be synchronized, Emergingsoft has put together a
script (linked below) to set all existing reservations to by sync'd.
EMS Software © 2018 / V44.1 / Page 376
CHAPTER 88: Installation and Configuration Guide
Please update the WHERE clause (line 35) as necessary. Keep in mind, the
migration will take additional time, and this should be planned for.
EMS Software © 2018 / V44.1 / Page 377
CHAPTER 88: Installation and Configuration Guide
CHAPTER 89: Installation
QUICK REFERENCE
1. From the application server, execute the Meeting Planner msi.
2. Walk through the installation wizard, choosing a custom type install.
3. Find the RoomWizard Integration Module and select it to be installed.After the
installation completes, find the web.config file. It defaults to "C:\Program
Files\Emergingsoft\RoomWizardConnector\"
4. Inside the Web.config file ensure that the DSN setting is the same as the DSN set-
ting in your MeetingPlannerWeb’s Web.Config. If it is not, please copy the Meet-
ingPlanner DSN and paste it over the existing RoomWizard DSN. This will make
sure the database connection is properly established.
5. Open a browser and go to each room wizard’s configuration page. This will be
"http://ip.address.of.roomwizard/"
6. Click on the link that takes you to its setup page and enter the password. Then
click on the Synchronization.
7. You will be greeted with a screen that will ask you how you want the RoomWizard
to synchronize. There will be two options. The default option is to use the default
database on the RoomWizard. Choose the second option which connects to an
external connector.
8. In the address field, use "http://ad-
dress.of.meetingplanner.server/RoomWizardConnector/Connector.aspx". You will
also see username and password fields. Try using a username and password of a
EMS Software © 2018 / V44.1 / Page 378
CHAPTER 89: Installation
user that would have sufficient permission to connect to the “Connector.aspx”
page. You will need to save at this point.
9. Near the bottom of the screen you should see Room ID field. Insert the Meet-
ingPlanner room ID that the RoomWizard represents here. So, if each room wizard
represents a different room, they will all have different ID’s. You’ll need to do a
“select * from room” against the MeetingPlanner database to get the room id’s and
corresponding room names.
10. You will need to save again after putting in the room ID.
11. You’ll know if it is working if the synchronization page says that it was able to find
our connector, and it displays some information regarding it. If it fails to connect, try
restarting the RoomWizard first, and then going back to the synchronization page.
12. If it still fails, then the RoomWizard is probably having trouble reaching the con-
figured page (Connector.aspx). You’ll need to make sure that server permissions
and directory permissions to allow for the user you configured in the user-
name/password section. You can also try deleting both of these fields and trying it
without the username/password specified.
13. The RoomWizard will often take a few minutes to sync up completely with the
server.
NOTE: You can set the room name from the Room "tab" on the top toolbar of
the RoomWizard web interface
EMS Software © 2018 / V44.1 / Page 379
CHAPTER 89: Installation
CHAPTER 90: Caution Screenand Warning Triangle
SYMPTOMThe RoomWizard device is displaying a caution screen on start or reboot.
Throughout the day a yellow warning triangle appears on the screen.
CAUSES
The RoomWizard device was reading the output xml from the Meeting Planner
connector incorrectly.
SOLUTION
Fixed in firmware update 4.4.0.6 for the RoomWizard device.
If your firmware version is lower than 4.4.0.6 contact your SteelCase or Room
Wizard support contact to receive instructions on how to update your firmware.
EMS Software © 2018 / V44.1 / Page 380
CHAPTER 90: Caution Screen and Warning Triangle
CHAPTER 91: ResourceIsolation: Splitting ApplicationPools
BACKGROUND
The RoomWizard Connector is setup as a web application, side-by-side with
the MeetingPlanner and MeetingPlanner_WS applications. All of these applic-
ations, by default, share an application pool. If issues are encountered or a bet-
ter allocation of resources on the application server is required or desired, the
RoomWizard Connector can be split into its own application pool. This will allow
the MeetingPlanner users and RoomWizard Connector to maintain separate
connection pools and memory allocations.
IMPLEMENTATION
1. Open IIS.
2. Create a new application pool. this new application pool will be the RoomWizard
App Pool and should mirror the MeetingPlanner App Pool setup.
3. Once the RoomWizard App Pool is created, select the Default Web Site > RoomW-
izard application.
EMS Software © 2018 / V44.1 / Page 381
CHAPTER 91: Resource Isolation: Splitting Application Pools
4. Click "Advanced Settings" and update the Application Pool from Meet-
ingPlannerAppPool to the RoomWizard pool that was just created.
5. After completion, it may also be beneficial to reset IIS.
EMS Software © 2018 / V44.1 / Page 382
CHAPTER 91: Resource Isolation: Splitting Application Pools
CHAPTER 92: Active DirectoryDiagnosticBACKGROUND
Emergingsoft has an Active Directory Synchronization service that comes as
part of MeetingPlanner. The service retrieves user accounts from configured
Active Directory LDAP paths and creates / maintains MeetingPlanner user pro-
files for found users. LDAP paths for the service are typically retrieved from
Microsoft's ADSI Edit tool, which provides a graphical view into Active Directory
and provides the Distinguished Name formatting for all paths that are required.
In the event that there are more complex issues preventing a connection to a
configured LDAP path, additional diagnostics tools may be required. As a pre-
liminary step, Emergingsoft has put this tool together to help with troubleshoot-
ing.
INSTALLATION
1. Download the zip file to the server.
2. Make sure that the zip is "Unblocked" once it is on the server.
3. Extract the files.
EMS Software © 2018 / V44.1 / Page 383
CHAPTER 92: Active Directory Diagnostic
4. Double-click the "Emergingsoft.MeetingPlanner.ActiveDirectoryDiagnostics.exe"
to run the application.
FUNCTIONALITY & USE
1. Launching the tool will bring up the diagnostics interface.
2. Input the LDAP path in question.
3. Update the LDAP filter, if needed. It will pre-populate with the default Emer-
gingsoft filter.
4. Click "Diagnose" to run.
Result (Legacy) & Result: These fields display the results from two different
connection methods to connect to the LDAP path and retrieve users. The
above screenshot shows a successful attempt - if any errors are encountered,
they will be output in these textboxes and should be provided to Emergingsoft
(a screenshot of the output, plus the results copy and pasted out of the window
and into a ticket).
Current User: This displays the Distinguished Name for the current user.
Domain Controller(s): This displays any domain controllers that can be found.
The discovered DCs are then pinged and checked for "Primary" status, both of
which our output in this textbox.
EMS Software © 2018 / V44.1 / Page 384
CHAPTER 92: Active Directory Diagnostic
EXCHANGEWEB SERVICES (EWS) DIAGNOSTICS
BACKGROUND
Emergingsoft has multiple products that integrate with Exchange, many of
which utilize ExchangeWeb Services. This diagnostics tool can help identify
URL, service account password, and permissions issues. As a first
troubleshooting step, Emergingsoft has put this tool together to help with
troubleshooting.
INSTALLATION
1. Download the zip file to any machine on your network.
2. Make sure that the zip is "Unblocked" once it is on the server.
3. Extract the files.
4. Double-click the "Emergingsoft.MeetingPlanner.ExchangeDiagnosticsTool.exe"
to run the application.
FUNCTIONALITY & USE
1. Launching the tool will bring up the diagnostics interface.
2. Input the appropriate settings as they are in MeetingPlanner.
3. Click "Run." (Note: The tool may take several minutes to return a result, please
be patient)
EMS Software © 2018 / V44.1 / Page 385
CHAPTER 92: Active Directory Diagnostic
Credential Validation: The first section of the diagnosis will contain credential
validation. This is to establish that the service account has access, as well as
which form of the credentials are required by the Exchange server.
Contact Email Address(es) Check: This confirms that the service account has
an active mailbox in Exchange (a requirement for Emergingsoft's EWS integ-
ration).
Impersonation Check: This confirms if the service account can impersonate the
provided email address. If no "Impersonation Email" is provided, this dia-
gnostics section will not return.
Room Permissions: Delegate Check: This provides the users that have explicit
delegate privileges. Any accounts with "Full Access," will not be listed here.
IIS WARMUP APPLICATION (V1.0.0.1)
BACKGROUND
Many ASP.NET products have a long compilation time, which leads to a long
loading time for the first user to access the website after an application pool is
recycled. Emergingsoft's products are no exception, and also do quite a bit of
application caching at this time. While this ultimately leads to a faster website, it
can be a burden on that initial user.
EMS Software © 2018 / V44.1 / Page 386
CHAPTER 92: Active Directory Diagnostic
In order to alleviate the issue, Emergingsoft has put together an IIS warmup
application that can be run to simulate the first user. Once setup, the first user
of the day will no longer experience this initial delay.
INSTALLATION & CONFIGURATION
1. Download the zip file provided. First confirm that the Zip is not blocked by Win-
dows. This can be done by right-clicking on the file, going to Properties and click-
ing "Unblock." If the "Unblock" button is not present, then the archive is already
unblocked.
2. Extract the files into a new folder on the application server (typically: ...\Emer-
gingsoft\IisWarmup).
3. Open the configuration file and update the <WarmUpElement> URLs. (Note: If you
wish to add any additional websites to the application, please feel free to do so).
4. Save and close.
5. Open the Administrative Tools > Task Scheduler.
6. Create a new task. Necessary task configurations are listed below:
General > "Run as...": This account will need to be an domain account
with a MeetingPlanner user profile.
General > "Run whether user is logged on or not": Enable
Triggers > Daily at 1:00am: By default the Web Scheduler will recycle
everyday at midnight. If this changes, you will want to modify the trigger or
add additional entries. This should be run after every recycle.
Actions > Start a program: This should point to the .exe file that was part of
the downloaded package.
EMS Software © 2018 / V44.1 / Page 387
CHAPTER 92: Active Directory Diagnostic
UPDATES & NOTES
v1.0.0.0
Initial release.
v1.0.0.1
Application will ignore SSL certificate errors.
RESOURCEMAILBOXMIGRATION: EXCHANGE
WEB SERVICES
BACKGROUND
Organizations that are currently using Exchange Resource Mailboxes to hold
reservation information, and are looking to migrate their reservations into Meet-
ingPlanner and sunset their Resource Mailboxes can use this tool to aid in the
reservation export process. The utility uses ExchangeWeb Services to access
each resource mailbox and create a csv file containing all reservation inform-
ation. This allows manual intervention, if necessary, to update any subjects,
owners or other information and will provide data in a specific format that can be
easily processed by Emergingsoft and turned into a sql script that will import
appropriately into MeetingPlanner.
EMS Software © 2018 / V44.1 / Page 388
CHAPTER 92: Active Directory Diagnostic
NOTE: If you are using or evaluating Emergingsoft's Exchange Sync service,
be mindful that the room configuration steps below will affect Exchange Sync.
It may be necessary to stop the service during the setup, configuration, and
processing steps with this tool.
SETUP & CONFIGURATION
PREREQUISITES
APPLICATIONS
Exchange 2010 or newer
MeetingPlanner
Web Scheduler
Application Notifier Service (part of the Web Scheduler installation)
SERVICE ACCOUNT
The migration tool will require a service account setup that has Read access to
the Resource Mailboxes that will be migrated.
Add-MailboxFolderPermission -Identity ResourecMailbox:\Calendar -User
ServiceAcct -AccessRights ReadItems
EMS Software © 2018 / V44.1 / Page 389
CHAPTER 92: Active Directory Diagnostic
INSTALLATION / SETUP
1. Download the zip provided. First confirm that the Zip is not blocked by Windows.
This can be done by right-clicking on the file, going to Properties and clicking
"Unblock." If the "Unblock" button is not present, then the archive is already
unblocked.
2. Extract the files into a new folder within the Emergingsoft installation folder
present on the application server for MeetingPlanner and the Web Scheduler (typ-
ically: C:\ Program Files (x86)\Emergingsoft\Exchange Migration).
3. Modify the Properties > Security on the new folder so that the EWS service
account has Full Control over the folder.
4. In the .config file, you will find two appSettings, which should be updated to meet
your organization's needs:
CsvRoomsListFilePath: If you are using the CSV method for identifying rooms to
be migrated (recommended), this is where you will provide the file path to the csv
file. There is more information in the next section for how to setup the file.
EnableFuzzyLogic: If "fuzzy logic" should be used to match recurring reservation
occurrences. Sometimes there are different Exchange Ids associated with these
reservation instances and doing a match based on the subject and organizer can
help resolve any issues. I would suggest disabling this option to start and
enabling it later, if tests demonstrate a need.
DaysBack: The number of days in the past for which the tool should retrieve reser-
vations. This is based on the start date of each appointment (or the start date of
the first occurrence in a recurring series).
EMS Software © 2018 / V44.1 / Page 390
CHAPTER 92: Active Directory Diagnostic
DaysForward: The number of days in the future for which the tool should retrieve
reservations. This is based on the start date of each appointment (or the start
date of the first occurrence in a recurring series).
MEETINGPLANNER CONFIGURATION
1. In a browser, open the Web Scheduler (http://server/scheduler).
2. Go to the Configuration page (gear icon), and update the Ews Integration section
as necessary.
3. Save all changes.
IDENTIFYING ROOMS TOMIGRATE
Please only choose one of the following methods.
Method 1: CSV File (recommended)
1. Run the following SQL query to assist with the csv creation: SELECT room_id,
room_name FROM room
2. Create a blank csv file with the following columns:
SMTP Address: The Exchange SMTP address for the room
Room Name: The room name in MeetingPlanner
Room Id: The room id in MeetingPlanner
3. Complete the columns for all rooms that should be migrated.
4. Update the export tool's configuration file with the path to the file (see above).
EMS Software © 2018 / V44.1 / Page 391
CHAPTER 92: Active Directory Diagnostic
Method 2: MeetingPlanner
1. Open MeetingPlanner Web (http://server/meetinglanner).
2. Go to Setup > General Settings > Room.
3. Enable Exchange Sync.
4. For each room that will be migrated, do the following*:
a. Go to Setup > Rooms > [select building] > [select room] > Exchange (or EBI
depending on your current configuration).
b. Check the "Enable Room for Synchronization" box.
c. Enter the smtp address for the room.
d. Save.
PROCESS
Once all of the above steps are complete, either log onto the application server
as the service account and execute the .exe or hold down Shift as you right-
click on the .exe and then select "Run as different user..." From here, you can
use the credentials for the service account with Exchange permissions.
Once the application completes, you will find one csv file per Resource Mailbox
created in the Exchange Migration folder. Please supply these csv files to our
support team (via a new ticket), and our team can convert these to sql scripts for
you. The sql script will then be able to be run against your MeetingPlanner data-
base to complete the migration.
EMS Software © 2018 / V44.1 / Page 392
CHAPTER 92: Active Directory Diagnostic
SCHEDULED RESERVATION IMPORT
BACKGROUND
Some organizations may wish to regularly import reservations from a different
tool or in bulk. A college, for instance, may need to add a new set of reser-
vations for the new classes that are available each semester. This tool will
allow an organization to complete those imports.
INSTALLATION & CONFIGURATION
1. Download the zip provided. First confirm that the Zip is not blocked by Windows.
This can be done by right-clicking on the file, going to Properties and clicking
"Unblock." If the "Unblock" button is not present, then the archive is already
unblocked.
2. Extract the files into a new folder on the application server (typically: ...\Emer-
gingsoft\ReservationImport).
3. Update the .config file:
DSN: Copy the DSN from the ... Emergingsoft \ MeetingPlannerWS \ web.-
config
CSVPath: Enter the file path to the csv file that will include the reser-
vations to me imported.
ReportDir: Enter the path where the "report" should be placed. This will
be an xml file containing any errors or deleted reservations, and should
EMS Software © 2018 / V44.1 / Page 393
CHAPTER 92: Active Directory Diagnostic
end with a "\".
ConflictPriority: There are three options to choose from here:
Import: Reservations being imported will all be added to Meet-
ingPlanner. Any conflicts will be deleted from MeetingPlanner and
noted in the report file
MeetingPlanner: Reservations already existing in MeetingPlanner
will take precedent. Any imported reservations in conflict will not be
added, but will be noted in the report.
Log: If any conflicts are encountered, both reservations will be
noted in the report - no reservations will be deleted.
DefaultUserID: If a reservation is being imported and the user cannot be
found based on the provided email address, the reservation will be mode
for this account. This would correspond to the user_profile.user_id in the
MeetingPlanner db.
TimeZoneCode: This should be the three-letter timezone abbreviation rep-
resenting the timezone that reservations are listed as in the import tem-
plate.
PROCESS
Once the application is properly configured, follow these steps to complete the
import:
EMS Software © 2018 / V44.1 / Page 394
CHAPTER 92: Active Directory Diagnostic
1. Complete the import template.
2. Save the csv file into the designated drop location.
3. Run the .exe application.
4. Review the report.
EMS Software © 2018 / V44.1 / Page 395
CHAPTER 92: Active Directory Diagnostic
CHAPTER 93: Exchange WebServices (EWS) Diagnostics
BACKGROUND
Emergingsoft has multiple products that integrate with Exchange, many of
which utilize ExchangeWeb Services. This diagnostics tool can help identify
URL, service account password, and permissions issues. As a first
troubleshooting step, Emergingsoft has put this tool together to help with
troubleshooting.
INSTALLATION
1. Download the zip file to any machine on your network.
2. Make sure that the zip is "Unblocked" once it is on the server.
3. Extract the files.
4. Double-click the "Emergingsoft.MeetingPlanner.ExchangeDiagnosticsTool.exe" to
run the application.
FUNCTIONALITY & USE
1. Launching the tool will bring up the diagnostics interface.
2. Input the appropriate settings as they are in MeetingPlanner.
EMS Software © 2018 / V44.1 / Page 396
CHAPTER 93: Exchange Web Services (EWS) Diagnostics
3. Click "Run." (Note: The tool may take several minutes to return a result, please be
patient)
Credential Validation: The first section of the diagnosis will contain credential val-
idation. This is to establish that the service account has access, as well as which
form of the credentials are required by the Exchange server.
Contact Email Address(es) Check: This confirms that the service account has an act-
ive mailbox in Exchange (a requirement for Emergingsoft's EWS integration).
Impersonation Check: This confirms if the service account can impersonate the
provided email address. If no "Impersonation Email" is provided, this diagnostics sec-
tion will not return.
Room Permissions: Delegate Check: This provides the users that have explicit del-
egate privileges. Any accounts with "Full Access," will not be listed here.
EMS Software © 2018 / V44.1 / Page 397
CHAPTER 93: Exchange Web Services (EWS) Diagnostics
CHAPTER 94: IIS Warmup Applic-ation (v1.0.0.1)
BACKGROUND
Many ASP.NET products have a long compilation time, which leads to a long
loading time for the first user to access the website after an application pool is
recycled. Emergingsoft's products are no exception, and also do quite a bit of
application caching at this time. While this ultimately leads to a faster website, it
can be a burden on that initial user.
In order to alleviate the issue, Emergingsoft has put together an IIS warmup
application that can be run to simulate the first user. Once setup, the first user
of the day will no longer experience this initial delay.
INSTALLATION & CONFIGURATION
1. Download the zip file provided. First confirm that the Zip is not blocked by Win-
dows. This can be done by right-clicking on the file, going to Properties and click-
ing "Unblock." If the "Unblock" button is not present, then the archive is already
unblocked.
2. Extract the files into a new folder on the application server (typically: ...\Emer-
gingsoft\IisWarmup).
EMS Software © 2018 / V44.1 / Page 398
CHAPTER 94: IIS Warmup Application (v1.0.0.1)
3. Open the configuration file and update the <WarmUpElement> URLs. (Note: If you
wish to add any additional websites to the application, please feel free to do so).
4. Save and close.
5. Open the Administrative Tools > Task Scheduler.
6. Create a new task. Necessary task configurations are listed below:
General > "Run as...": This account will need to be an domain account
with a MeetingPlanner user profile.
General > "Run whether user is logged on or not": Enable
Triggers > Daily at 1:00am: By default the Web Scheduler will recycle
everyday at midnight. If this changes, you will want to modify the trigger or
add additional entries. This should be run after every recycle.
Actions > Start a program: This should point to the .exe file that was part of
the downloaded package.
UPDATES & NOTES
v1.0.0.0
Initial release.
v1.0.0.1
Application will ignore SSL certificate errors.
EMS Software © 2018 / V44.1 / Page 399
CHAPTER 94: IIS Warmup Application (v1.0.0.1)
CHAPTER 95: Resource MailboxMigration: Exchange Web Ser-vices
BACKGROUND
Organizations that are currently using Exchange Resource Mailboxes to hold
reservation information, and are looking to migrate their reservations into Meet-
ingPlanner and sunset their Resource Mailboxes can use this tool to aid in the
reservation export process. The utility uses ExchangeWeb Services to access
each resource mailbox and create a csv file containing all reservation inform-
ation. This allows manual intervention, if necessary, to update any subjects,
owners or other information and will provide data in a specific format that can be
easily processed by Emergingsoft and turned into a sql script that will import
appropriately into MeetingPlanner.
Note: If you are using or evaluating Emergingsoft's Exchange Sync service, be
mindful that the room configuration steps below will affect Exchange Sync. It
may be necessary to stop the service during the setup, configuration, and pro-
cessing steps with this tool.
EMS Software © 2018 / V44.1 / Page 400
CHAPTER 95: Resource Mailbox Migration: Exchange Web Services
SETUP & CONFIGURATION
PREREQUISITES
APPLICATIONS
Exchange 2010 or newer
MeetingPlanner
Web Scheduler
Application Notifier Service (part of the Web Scheduler installation)
SERVICE ACCOUNT
The migration tool will require a service account setup that has Read access to
the Resource Mailboxes that will be migrated.
Add-MailboxFolderPermission -Identity ResourecMailbox:\Calendar -User
ServiceAcct -AccessRights ReadItems
INSTALLATION / SETUP
1. Download the zip file provided. First confirm that the Zip is not blocked by Win-
dows. This can be done by right-clicking on the file, going to Properties and click-
ing "Unblock." If the "Unblock" button is not present, then the archive is already
unblocked.
2. Extract the files into a new folder within the Emergingsoft installation folder
present on the application server for MeetingPlanner and the Web Scheduler
EMS Software © 2018 / V44.1 / Page 401
CHAPTER 95: Resource Mailbox Migration: Exchange Web Services
(typically: C:\ Program Files (x86)\Emergingsoft\Exchange Migration).
3. Modify the Properties > Security on the new folder so that the EWS service
account has Full Control over the folder.
4. In the .config file, you will find two appSettings, which should be updated to meet
your organization's needs:
CsvRoomsListFilePath: If you are using the CSV method for identifying rooms to
be migrated (recommended), this is where you will provide the file path to the csv
file. There is more information in the next section for how to setup the file.
EnableFuzzyLogic: If "fuzzy logic" should be used to match recurring reservation
occurrences. Sometimes there are different Exchange Ids associated with these
reservation instances and doing a match based on the subject and organizer can
help resolve any issues. I would suggest disabling this option to start and
enabling it later, if tests demonstrate a need.
DaysBack: The number of days in the past for which the tool should retrieve reser-
vations. This is based on the start date of each appointment (or the start date of
the first occurrence in a recurring series).
DaysForward: The number of days in the future for which the tool should retrieve
reservations. This is based on the start date of each appointment (or the start
date of the first occurrence in a recurring series).
MEETINGPLANNER CONFIGURATION
1. In a browser, open the Web Scheduler (http://server/scheduler).
2. Go to the Configuration page (gear icon), and update the Ews Integration section
EMS Software © 2018 / V44.1 / Page 402
CHAPTER 95: Resource Mailbox Migration: Exchange Web Services
as necessary.
3. Save all changes.
IDENTIFYING ROOMS TOMIGRATE
Please only choose one of the following methods.
Method 1: CSV File (recommended)
1. Run the following SQL query to assist with the csv creation: SELECT room_id,
room_name FROM room
2. Create a blank csv file with the following columns:
-- SMTP Address: The Exchange SMTP address for the room
-- Room Name: The room name in MeetingPlanner
-- Room Id: The room id in MeetingPlanner
3. Complete the columns for all rooms that should be migrated.
4. Update the export tool's configuration file with the path to the file (see above).
Method 2: MeetingPlanner
1. Open MeetingPlanner Web (http://server/meetinglanner).
2. Go to Setup > General Settings > Room.
EMS Software © 2018 / V44.1 / Page 403
CHAPTER 95: Resource Mailbox Migration: Exchange Web Services
3. Enable Exchange Sync.
4. For each room that will be migrated, do the following*:
a. Go to Setup > Rooms > [select building] > [select room] > Exchange (or EBI
depending on your current configuration).
b. Check the "Enable Room for Synchronization" box.
c. Enter the smtp address for the room.
d. Save.
PROCESS
Once all of the above steps are complete, either log onto the application server
as the service account and execute the .exe or hold down Shift as you right-
click on the .exe and then select "Run as different user..." From here, you can
use the credentials for the service account with Exchange permissions.
Once the application completes, you will find one csv file per Resource Mailbox
created in the Exchange Migration folder. Please supply these csv files to our
support team (via a new ticket), and our team can convert these to sql scripts for
you. The sql script will then be able to be run against your MeetingPlanner data-
base to complete the migration.
EMS Software © 2018 / V44.1 / Page 404
CHAPTER 95: Resource Mailbox Migration: Exchange Web Services
CHAPTER 96: Scheduled Reser-vation Import
BACKGROUND
Some organizations may wish to regularly import reservations from a different
tool or in bulk. A college, for instance, may need to add a new set of reser-
vations for the new classes that are available each semester. This tool will
allow an organization to complete those imports.
INSTALLATION & CONFIGURATION
1. Download the zip provided. First confirm that the Zip is not blocked by Windows.
This can be done by right-clicking on the file, going to Properties and clicking
"Unblock." If the "Unblock" button is not present, then the archive is already
unblocked.
2. Extract the files into a new folder on the application server (typically: ...\Emer-
gingsoft\ReservationImport).
3. Update the .config file:
DSN: Copy the DSN from the ... Emergingsoft \ MeetingPlannerWS \ web.config
CSVPath: Enter the file path to the csv file that will include the reservations to me
imported.
EMS Software © 2018 / V44.1 / Page 405
CHAPTER 96: Scheduled Reservation Import
ReportDir: Enter the path where the "report" should be placed. This will be an xml file
containing any errors or deleted reservations, and should end with a "\".
ConflictPriority: There are three options to choose from here...
Import: Reservations being imported will all be added to MeetingPlanner. Any con-
flicts will be deleted from MeetingPlanner and noted in the report file
MeetingPlanner: Reservations already existing in MeetingPlanner will take pre-
cedent. Any imported reservations in conflict will not be added, but will be noted in
the report.
Log: If any conflicts are encountered, both reservations will be noted in the report - no
reservations will be deleted.
DefaultUserID: If a reservation is being imported and the user cannot be found based
on the provided email address, the reservation will be mode for this account. This
would correspond to the user_profile.user_id in the MeetingPlanner db.
TimeZoneCode: This should be the three-letter timezone abbreviation representing
the timezone that reservations are listed as in the import template.
PROCESS
Once the application is properly configured, follow these steps to complete the
import:
1. Complete the import template.
2. Save the csv file into the designated drop location.
EMS Software © 2018 / V44.1 / Page 406
CHAPTER 96: Scheduled Reservation Import
3. Run the .exe application.
4. Review the report.
EMS Software © 2018 / V44.1 / Page 407
CHAPTER 96: Scheduled Reservation Import