medium duty scaffold tester - qualiscaffold 2004 · 7883:2005 bs 788:2005 code of practice for the...

2
Medium Duty Scaffold Tester - QualiScaffold 2004 Toll-Free: 1.877.884.TEST (8378) | Fax: 954.697.8211 [email protected] | www.WorldofTest.com USA Canada UAE Mexico India Hong Kong www.WorldofTest.com/scaffold-tester-qualiscaffold-2004 Meeting and exceeding TG4:04 ( BS 8539, BS 5080, BS EN 795, BS 7883) standards. Applications QualiBolt 2003 Medium Duty Safety Harness Eyebolt Tester is designed for testing Safety Harness Eyebolts to the requirements of BS 5845 and EN 795 "Protection against falling from a height, anchor devices - requirement for testing" and BS 7883:2005 BS 788:2005 Code of Practice for the design, selection, installation, use and maintenance of anchor devices conforming to BS EN795.Ladder restraint hooks and most ringbolts in concrete or masonry may be tested with this kit. QualiBolt 2003 enabling engineers to confirm the holding power of anchors in most construction materials. It comprises the necessary accessories to enable the pull test of common Eye bolt and ring bolt fixings. Please notice each structural anchorage, after installation, should be submitted to an axial pull-out force of 6kN to confirm the soundness of the fixing. A quality hard wearing carry case is supplied with each kit. The tester is preassembled and accessories can all be quickly attached with ease depending on the type of fixing being tested. Features • 2000 model Medium Duty Tester with fixed Gauge to 20kN • 150mm Load Spreading Bridge with 100mm Hex Extension legs (×3) • Turning handle with integrated 22mm operating nut • M16 Hex Setscrew • Bolt Tester Adaptor • M12 Ringbolt Adaptor Clevis • M12 Locking Adaptor • Calibration Certificate • Padded Carrying Case TESTING TECHNOLOGIES

Upload: duongque

Post on 08-Sep-2018

240 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Medium Duty Scaffold Tester - QualiScaffold 2004 · 7883:2005 BS 788:2005 Code of Practice for the design, selection, installation, use and maintenance of anchor devices conforming

Medium Duty Scaffold Tester - QualiScaffold 2004

Toll-Free: 1.877.884.TEST (8378) | Fax: 954.697.8211

[email protected] | www.WorldofTest.com

USA Canada UAE Mexico India Hong Kong

www.WorldofTest.com/scaffold-tester-qualiscaffold-2004

Meeting and exceeding TG4:04 ( BS 8539, BS 5080, BS EN 795, BS 7883) standards.

ApplicationsQualiBolt 2003 Medium Duty Safety Harness Eyebolt Tester is designed for testing Safety Harness Eyebolts to the requirements of BS 5845 and EN 795 "Protection against falling from a height, anchor devices - requirement for testing" and BS 7883:2005 BS 788:2005 Code of Practice for the design, selection, installation, use and maintenance of anchor devices conforming to BS EN795.Ladder restraint hooks and most ringbolts in concrete or masonry may be tested with this kit.

QualiBolt 2003 enabling engineers to confirm the holding power of anchors in most construction materials. It comprises the necessary accessories to enable the pull test of common Eye bolt and ring bolt fixings.

Please notice each structural anchorage, after installation, should be submitted to an axial pull-out force of 6kN to confirm the soundness of the fixing. A quality hard wearing carry case is supplied with each kit. The tester is preassembled and accessories can all be quickly attached with ease depending on the type of fixing being tested.

Features • 2000 model Medium Duty Tester with fixed Gauge to 20kN • 150mm Load Spreading Bridge with 100mm Hex Extension legs (×3) • Turning handle with integrated 22mm operating nut • M16 Hex Setscrew • Bolt Tester Adaptor • M12 Ringbolt Adaptor Clevis • M12 Locking Adaptor • Calibration Certificate • Padded Carrying Case

TESTING TECHNOLOGIES

Page 2: Medium Duty Scaffold Tester - QualiScaffold 2004 · 7883:2005 BS 788:2005 Code of Practice for the design, selection, installation, use and maintenance of anchor devices conforming

Toll-Free: 1.877.884.TEST (8378) | Fax: 954.697.8211

[email protected] | www.WorldofTest.com

USA Canada UAE Mexico India Hong Kong

Load GaugePull-out load range 0-25kN/5,600lbfAccuracy ± 2.5% FSDUnit of Calibration kNIndication Pull-out loadProtection • Protective rubber cover • Impact resistant glass. Protections against sudden load (Sudden failure of fixing/connection.)

Socket anchor using slave bolts e.g. for ringbolt Eye type anchors

Hex headed bolts including self tapping concrete screws Projecting studs up to M16

Specifications

TESTING TECHNOLOGIES