mechanics based design of structures and machines ...theoretical formulation of finite-element...
TRANSCRIPT
PLEASE SCROLL DOWN FOR ARTICLE
This article was downloaded by: [McInnerny, Clare][informa internal users]On: 23 March 2011Access details: Access Details: [subscription number 755239602]Publisher Taylor & FrancisInforma Ltd Registered in England and Wales Registered Number: 1072954 Registered office: Mortimer House, 37-41 Mortimer Street, London W1T 3JH, UK
Mechanics Based Design of Structures and MachinesPublication details, including instructions for authors and subscription information: http://www-intra.informaworld.com/smpp/title~content=t713639027
Theoretical Formulation of Finite-Element Methods in Linear-ElasticAnalysis of General Shells*Satyanadham Atluria; Theodore H. H. Piana
a MASSACHUSETTS INSTITUTE OF TECHNOLOGY, CAMBRIDGE, MASS
To cite this Article Atluri, Satyanadham and Pian, Theodore H. H.(1972) 'Theoretical Formulation of Finite-ElementMethods in Linear-Elastic Analysis of General Shells*', Mechanics Based Design of Structures and Machines, 1: 1, 1 — 41To link to this Article: DOI: 10.1080/03601217208905331URL: http://dx.doi.org/10.1080/03601217208905331
Full terms and conditions of use: http://www-intra.informaworld.com/terms-and-conditions-of-access.pdf
This article may be used for research, teaching and private study purposes. Any substantial orsystematic reproduction, re-distribution, re-selling, loan or sub-licensing, systematic supply ordistribution in any form to anyone is expressly forbidden.
The publisher does not give any warranty express or implied or make any representation that the contentswill be complete or accurate or up to date. The accuracy of any instructions, formulae and drug dosesshould be independently verified with primary sources. The publisher shall not be liable for any loss,actions, claims, proceedings, demand or costs or damages whatsoever or howsoever caused arising directlyor indirectly in connection with or arising out of the use of this material.
J . Struct. Mech., l (1 ) 1-41 (1972)
Theoretical Formulation
of Finite-Element Methods
in Linear-Elastic Analysis
of General Shells"
SATVANADHAM ATLURI" and THEODORE H. H. PlAN
ABSTRACT
A systematic classification of the variational functionals whose stationarity condiiions (Euler equations) can be used alternately to solve for the various unknowns in a boundary-value problem in linear-shell theory is made. The application of these alternate variational principles t o a finite-element as- sembly of a shell and thus, the development of the properties of an individual discreie element are studied in detail. A classification of the finite-element methods, formulated from the variational principles by systematically relaxing the continuity requirements at the interelement boundaries o f adjoining dis- crete elements is made.
*This work was supported by the US. Air Force under Contract F04694-67-C-0039. CCN P008.
'*Presently with the Department of Aeronautics and Astronautics, University of Washing- ton, Seaule.
Copyright 0 1972 by Marcel Dekker. Inc. NO PARTof rhis work moy be reprod!tced or urilized in any form or by any meons, electronic or mechanical, including xerography, pho- tocopying, microfilm, and recording, or by any information storage and retrieval system. without the written permission of the publisher.
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
S. Atluri and T. H. H. Pian
I. INTRODUCTION
With the widespread use of thin shells as load-carrying members in various structures, the need for a reliable analysis has been greatly felt over the past decade. Exact analytical' solutions in linear-shell theory have been possible only in very limited cases of shells with simple geometry (such as cylinders, cones, and spheres), shells whose boundaries coincide with the coordinate curves used to define the shell surface, and shells without discontinuities (cutouts), or without any attachments (stringers, etc.). T o overcome these shortcomings and the additional complexities caused by variable thickness and variable anisotropic properties, the use of an approximate method of analysis becomes necessary.
One such approximate method is the "finite-element method." A review and a systematic classification of the finite-element methods as formulated from the variational principles in solid mechanics are given by Pian and Tong [I], who also discussed the application of such methods in plate-bending analysis. The problem of a shell is more complicated because, in the general bending behavior, the variables defining the displacement field are, in general, coupled.
In the finite-element analysis of shells, Green, Strome, and Weikel [2] used an assemblage of quadrilateral or triangular flat membrane elements. Johnson [3] compared several schemes of flat plate elements in the solution of cylin- drical panels. In this approach, in addition to the structural idealization errors inherent in the finite-element solution, geometrical idealization errors are also present. For shells of revolution, the use of conical frusta as finite elements has been attempted by Grafton and Strome [4]. The extension of the conical element for unsymmetric deformations by means of Fourier series was made by Percy, Pian, Klein, and Navaratna [5]. For thick shells of revolu- tion, a ring element of triangular cross section was used, for symmetrical deformations, by Clough and Rashid [6], and later extended for the asym- metrical case by Wilson 171. All the abovementioned finite elements were derived from a "compatible displacement model" which uses displacements that are compatible both in the interior of the element as well as along the interelement boundaries.
For curved shells with cutouts, sections of shells, and curved shells that are not surfaces of revolution, there is a necessity for using doubly curved quadri- lateral or triangular elements. Quadrilateral circular cylindrical thin shell elements were developed by Cantin and Clough [8] who use five rigid body modes and 15 straining modes of displacements for each element, by Bogner,
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theorerical Formulation of Finite-Element Methods 3
Fox, and Schmit (91 who use 48 straining modes of displacement for each element, and by Olson and Lindberg [lo] who use 28 modes of displacement for each element. All these authors used a Kirchhoff deformation hypothesis for shell deformation which reduces the displacement variables to three, viz., the two displacements parallel and the one displacement normal to the refer- ence surface of the shell. Key [I I] developed a quadrilateral doubly curved shell element which incorporates the effect of transverse shear deformation in the shell. All the above elements were based on a "displacement model" (to be discussed later in this paper). As has been discussed by Atluri 1121, however, all the above elements violate, to various degrees, the criteria for the conver- gence of the displacement solution, as discussed by Tong and Pian 1131, viz., I ) compatibility in displacements and slopes at interelement boundaries, 2) choice of displacements such that constant strain states are represented, and 3) the inclusion o f a complete set of rigid-body modes in the element interior in the assumed displacement field.
The purpose of this paper is to systematically consider the various varia- tional functionals whose stationary conditions can be used alternately to solve for various unknowns in linear-shell theory. In applying these varia- tional principles to the finite-element assembly of a shell, various "modified variational principles" can be generated by systematically relaxing the continuity (compatibility) requirements along the interelement boundary. Several finite-element schemes can be generated using these modified varia- tional principles, the unknowns in the final algebraic set of equations being different in each case. The properties of a discrete element in each of the different finite-element schemes are discussed. Presented are I) a "compatible displacement model," 2) two "hybrid displacement models," 3) two "equilib- rium stress models," 4) a "hybrid stress model" and several "mixed models." An attempt is made to keep the formulations within the framework of a non- Kirchhoff-type linear-shell theory, as proposed by Reissner 1141, which includes both transverse shear stresses and couple-stress stress couples. Specializations to a Kirchhoff-type shell theory are also indicated.
II. GENERAL THEORY OF THIN SHELLS WITH COUPLE STRESSES
Referring to Fig. I, the geometry of the midsurface of a general shell is represented by a radius vector R which is a function of two arbitrsry curvi- linear coordinates and 5'. The base vectors a. on the midsurface and the unit vector o, normal to the midsurface are given by
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
S. AIluri and T. H. H. Pion p SHELL MIDSURFACE
i
R'E',(E2,
+ b I -
1
Fig. I Nomenclafure for shell midsurface,
a, = dR/a? and n = a , x a,/&
where
a = det la,,l
and the metric tensors are given by
The contravariant metric tensors am6 and the contravariant base vectors a" are defined by
where
and
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formularion of Finite-Elemenl Methods 5
For further use, the Gauss-Weingarten relations for a surface are represented by
where
and
As shown in Fig. 2a, the vector of stress resultants N", and o f stress couples M", acting on a side 5" = const can be written as
N" = Ji(NmPaP + qmn) (6 )
and
M" = Ji{n x (MmPas) + P'n) (7)
Fig. 2a Stress resultants and stress couples acting on a shell element
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
S. Arluri and T. H. H. Pian
Fig. 2b Forces acting on a differential element of a general shell in static equilibrium.
where NmP are the "membrane stress resultants," q" are the transverse shear resultants, MEP are the stress couples, and Pa are the couple-stress stress couples which were first introduced by Gunther [15].
The vectors of externally applied forces and moments per unit midsurface area can be written, respectively, as
and
F = F a , + F30
m = n x (mmaJ + m3n
The two vector equations of static equilibrium for the shell element depicted in Fig. 2b become
- E + F J ( a = O at-
and
which are equivalent to six scalar equations that relate the 12 scalar com- ponents of N" and M".
Consistent with the state of description of stress, the strain state of the
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formulation of Finite-Element Methods 7
shell is represented by membrane strains E = ~ , transverse shear strains y,, curvature strains K , ~ , and couple-strain strain couples I,. These strains will, in turn, depend on an appropriately chosen description of the state of defor- mation of the shell midsurface. Thus, the midsurface strain vector E, and the curvature strain vector K~ can be difined as
The internal energy of the shell per unit midsurface area can be then ex- pressed consistently as
The translational displacement vector u and the rotation vector 4 are then introduced in order to be able to write the virtual work per unit midsurface area for the external surface loads and moments as
Making use of Eqs. (10) and (I I), one can show following Reissner [14], that for the virtual work principle to be satisfied, the following relations must hold :
and
Hence, within the realm of linear theory,
and
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
8 S. A~Iuri and T. H. H. Pian
The individual components of strain are derived from
Since the four strain vectors and K~ are derived from only two vectors u and #, the two "compatibility relations" for strain measures can be immediately observed to be
and
Noting the form of Eqs. (10) and ( I I) and Eq. (22) and (23), it can be ob- served that if the mathematical analogy
N" = S"#K# and M" = Foep (25)
is observed, the equilibrium equations in the absence of external loads and moments (lo) and (I I ) and the compatibility conditions (22) and (23) can be derived from one another. This analogy is generally referred to as the "static geometric analogy."
Just as the strains were derived from two deformation vectors u and #, the stresses can be derived from analogous stress functions F and H such that
and
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formulation of Fiuire-Element Merhods
where the further analogy
is identified. Hence, one can write
u = u'a, + wn
4 = o x ( p a , ) + Q n
H = H"a, + Kn
F = P ( a , x n) + Jo
The expressions for E.@ etc., in terms of u and 4 and for Nap etc., in terms of F and H are given in the Appendix.
In a Kirchhofl-type shell theory the transverse shear strains y, and the stress couples P' are assumed to be zero, which leads to the assumptions
and
From Eqs. (33) and (34) one obtains relations between 4 and u, and F and H, respectively. Thus u and H become the only independent displace- ment and stress function vectors, respectively. The relations between and u, and N a p and H, respectively, for a Kirchhoff-type shell theory are listed in the Appendix where the usual definitions E , , = E , , = f ( c , , + E , , ) and N1' = N" = f ( N L Z + N Z 1 ) are employed.
Ill. A GENERAL VARIATIONAL PRINCIPLE I N SHELL THEORY
Neither the two vector equilibrium equations f o r the four vector stress resultants nor the two vector compatibility conditions for the four vector strain resultants can be solved independently. These equations need to be
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
10 S. Atluri and T. H. H. Pian
supplemented by introducing the constitutive relations. In order to accom- plish this, it is convenient to postulate the existence of the stress potential A and the strain potential B such that
A = A" + A", A;; B = B" + B," + B; (35)
where the subscript M refers to "membrane energy," B to "bending energy," and the superscripts m and s refer to the parts of bending energy contributed by moments and transverse shear, respectively. The stress and strain poten- tials are defined by
and
and
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formulalio~r of Fillire-Element Methods 11
With these definitions, one can now write the shell theory analog of the most general functional n, as was done for three-dimensional elasticity by Washizu [16, 181, Hu [17], and Reissner [19], where
where C, is the midsurface edge curve o n which stress vectors N and m are prescribed, and C, is the midsurface edge curve where deformation vectors u and 4 are prescribed. By setting the variation 672, with respect to each of the quantities N", M", e,, K ~ , U, and 4 equal t o zero, one obtains as Euler differential equations: I) the equlibrium equations, viz., Eqs. (10) and (I I), 2) the constitutive relations, viz.,Eq. (44), 3) the strain-displacement relations, viz., Eqs. (20) and (21), and 4) the boundary conditions
N = N; M = M o n C, and u = ii; 4 = 5 on C, (45)
IV. THE STATIC GEOMETRIC ANALOG OF THE GENERAL VARIATIONAL PRINCIPLE
From the static geometric analogy, described earlier, a variational func- tional that uses the equations for stresses in terms of stress functions, and the complementary strain energy density B can be written immediately as
In the above functional, e., K., F, H, N', and M' all can be varied independ- ently; however, N; and M; are the particular parts of the solution corre-
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
12 S. Arluri and T. H. H. Pion
sponding to given external loads and hence cannot be subjected t o variation. Thus, setting the variation Sn*, equal to zero leads in addition t o the Euler equations: 1) the compatibility conditions (22) and (23), 2) the constitutive relations (38), 3) the stress-stress function relations (26) and (27), and 4) the boundary conditions
In using the variational functionals n, and nf in connection with a Kirchhof-type shell theory, the constraint relations between 4 andu(33). the relation between F and H (34), respectively, should be observed.
In the following, several subclasses of the general variational principles hn, = 0 and an*, = 0. and their applications to finite-element theory are indicated.
V. THE FINITE-ELEMENT VARIATIONAL TECHNIQUE
A. The General Approach
It should be noted that in the functional n, given by (44), the quantities u, 4 , E,, K,, N", and ME can be varied independently, and that in the functional nf given by (46), the quantities F, H. N", ME, E,, and K, can be varied independently. In practice, for a given material of a shell, the constitutive relations are known; hence, one can find N" and M" if E, and K, are known, and vice versa. Several subclasses of the two general variational functionals can be constructed by assuming apriori some of the shell theory relations that would otherwise follow from the general functionals. Thus, for instance, by assuming a priori the stress-strain relations and the strain displacement relations, the functional n, can be used t o find, through a variational tech- nique, the displacement field generated in the shell in equilibrium under the action of applied loads. By making proper assumptions a priori in the two functionals n, and n:, the solution of any boundary-value problem of a shell can be reduced to finding, from the stationary conditions of the spe- cialized functionals, any vector pair of independent variables out of the possible pairs: (u; 4 ) ; (e,; K,); (N", M"); (F, H); (u,. Ma), and (+,, N") subject to the given boundary conditions. However, a special form of the variational principle as indicated later, can be used to solve for the pairs (u, 4 ) and (N", hl") simultaneously. Once these independent variables are solved for, the
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formrrlation of Finite-Eleme~rf Methods 13
other shell variables can be deduced from the relations that were considered a prior;.
In the finite-element procedure, the shell domain is divided into a finite number of regions called discrete elements: which are, in practice, well- conditioned triangles or quadrilaterals in shape for general shells o r meridio- nally curved frusta for shells of revolution. Mathematically, the finite-element technique consists of solving for the alternate sets of independent variables a s indicated earlier, a t a finite number of control points called "nodes" of each discrete element; these nodes are generally located at the boundaries of each element, but may also be in the interior of each element. The values of the above mentioned basic unknown variables in the interior of each element are interpolated, in a predetermined fashion, in terms of their respective nodal values. However, in choosing these interpolation functions in the interior of each element, there are several criteria regarding the distribution of a given unknown quantity a t the interelement boundary so as to maintain "com- patibility" (in a broad sense) with the neighboring element, so that the respective variational functional can be defined for the finite-element assem- blage of the shell a s the sum (extending over the number of elements) of the value of the functional for each individual element. However. such interele- ment "compatibility" or "continuity" conditions can be relaxed by "modi- fying" the variational functionals by using a Lagrangian multiplier technique a s discussed by Pian and i'ong [I] and to be discussed further in this paper. Additional criteria to insure the monotonic convergence of the solution, a s the size of the discrete element is progressively reduced, have to be taken into account.
In the following subsections, several alternate schemes of finding the basic unknown variables, a s indicated earlier, a t the nodes of a finite-element assembly of a shell are examined.
6. Displacement Models
Here, the finite-element models that can be constructed through the initial assumption of a continuous displacement field in the interior of each element are studied. Since the description of the state of deformation in a KirchhotT- type theory differs from that in a Reissner-type theory, the basic differences arising, therefore, in the finite-element technique using the above theories are pointed out.
If in the functional n, of Eq. (44), the strain-displacement relations Eqs. (18) and (19) and the stress-strain relations Eq. (39) are assumed apr ior i , then the functional n, reduces to
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
14 S. A h r i and T. H. H. Pion
In the above C, and C,, are the edge curves of the shell where the stresses and displacements are actually prescribed. However, it should be remarked that in extending the function n, to an assemblage of finite elements such as ABCD (see Fig. 3 ) u can be recognized as the displacement field in the interior of each element, C,, refers to the interelement boundary, i.e., line ABCDA, ii is the interelement boundary displacement, and the quantitiesm and Ff are the line loads that are present along ABCDA, especially when ABCDA o r a part of it is aligned with the edge of a shell.
Fig. 3 An isolated discrete element ABCD.
1. Compatible Displacmeot Model (CDM). If the displacement field in the interior is assumed in such a way that interelement boundary displacements are compatible, the line integral on C, in Eq. (48) vanishes for each element. Such a model is termed a "compatible displacement model."
Since the deformation state in a Reissner-type theory is described by two independent vectors u (translation) and ( (rotation), and since the deforma- tion state in a Kirchhoff-type theory is defined b y u alone, the appropriate generalized coordinates at each node A, B, C, and D (see Fig. 3 ) are:
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theorelical Formularion of Finite-•’It-men1 Merhods
Reissner-type theory
4 = n x (pa,) + Rn
KirchhoK-type theory
Thus, in a Reissner-type theory, the interpolation function that is used t o describe the interior displacement field (u, 4) is such that u and 4 are linear along any edge, say, BC in Fig. 3 , such that they could be determined uniquely from their respective values a t nodes B and C. This automatically insures interelement displacement field continuity, whereas, in a Kirchhoff-type theory, the displacement field should be so chosen that not only u%nd ware continuous across the interelement boundary, but also the first derivatives of w should be continuous so that the rotations 4, would be continuous across the interelement boundary.
If the displacement fields are so chosen, the total potential energy for the finite-element assemblage of the shell, using discrete elements of the CDM type, is denoted by (n,),,, and can be written as
where a, refers to the area of the tnth discrete element, C," refers to that portion of the edge curve of the mth element where stresses are prescribed, and the summation extends over the N elements of the system.
Henceforth, let v represent the displacement field in a general sense, to mean either u, 4 in a Reissner-type theory o r u in a KirchhoE-type theory. Let the matrix of the assumed displacement field for each element be
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
16 S. Arluri and T. H. H. Pian
where [U,] is a matrix of appropriately assumed functions in coordinates 5' and (a} are undetermined parameters. As pointed out by Melosh [20], and Tong and Pian (131, although it is not necessary from a convergence point of view, it is desirable to include a complete set of rigid-body displacement modes in the set of functions U , . However, in general, it is extremely difficult to include these rigid-body modes and yet satisfy the interelement com- patibility. The inclusion of such rigid-body modes will be considered in the subsequent discussion on the hybrid displacement models.
The corresponding strain distribution for each elements is
Using Eqs. (52) and (53) in Eq. (51), one obtains
where
and [C] is the elastic constant matrix. The values of the nodal generalized displacements defined in terms of the
local coordinate system for each element can he expressed as
If one takes the same number of displacement parameters as the nodal coordinates, the transformation matrix [ B ] is square. Hence,
Using Eq. (59) in Eq. (54), one can write
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formulation of Finite-Element Merhods
where, from usual definitions,
[K,] = stiffness matrix for the mth element
= [ J I T [ H I ] [ J l (61)
and
{Q.] = element nodal load matrix for the mth element
= [ J I T { F I + S t } (62)
The element nodal displacements { q ) for different elements, which are not independent, can be related to a column of independent global displacements (q*} thus:
where [J*] includes the effect of transforming from local coordinates for in- dividual elements to the global coordinates for the element assembly. Thus, Eq. (60) can be written as
where
and
If some of the global coordinates are prescribed, Eq. (64) can be rewritten as
where {q : ] is unknown, {q:} is prescribed, (F : } is given, and {F:] is un- known. Then the stationarity condition of the functional in Eq. (67) leads to
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
18 S. Atluri and T. H. H. Pian
which can be solved for (9:). Then one obtains
A doubly curved quadrilateral element for a general shell of revolution based on the above model was developed by Atluri [I21 and successfully tested in the program STACUSS by Kotanchik [21].
2. Hybrid Displacement Model-: (HDM-I). The condition of interelement compatibility on the choice of displacement field for each element can be relaxed by choosing an arbitrary displac~ment field in the interior of each element and including the Lagrangian multiplier terms
for each element in the functional of Eq. (51); where u,(4J denotes the displacement (rotation) on the boundary which results from the displacement (rotation) field assumed for the interior of the element, ii(& is the interelement displacement (rotation) which can be prescribed independently of u,(+.) such that it is determinable uniquely in terms of the generalized nodal displacements and the stress resultants N, and M, along the interelement boundary of element m playing the role of Lagrange multipliers. Adding the term in Eq. (70) to Eq. (51). the modified functional can be written as
I t should be noted in the above equation that the independent variables in each element are u, 4, N,, and M,, whereas the prescribed interelement displacement fields ii and 6 are not independent for each element.
Since the variations Su, 64 , 6NL, and 6ML are arbitrary and independent for each individual element, it can be shown that the Euler equations for the functional in Eq. (71) are
aNZ - + F & = O o n a,,, JY
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formulation of Finite-Element Merhods 19
JM" - + a. x N' + m J i = o on a, Jr
- u, = ii; 4, = 4 on C, (74)
N, = N,; M, = M, on C, (75)
N, = A; M. = R on C, (76)
Equations (72) and (73) state that the stress developed by the assumed interior displacement field satisfy the static equilibrium for each element. The condi- tion that the interelement displacements generated by the assumed interior displacement field match the prescribed interelement element displacements along C, is represented by Eq. (74). The fact that the interelement stresses generated by the interior assumed displacement field match the prescribed Lagrangian stresses is represented by Eq. (75). Finally, for edges CSm along which there are prescribed (actually present) stress resultants, Eq. (76) states that these prescribed stresses are matched by the edge tractions which result from the assumed internal displacement field. The fact that the Lagran- gian stresses are assumed independently for each element indicates that stress discontinuities are still present across the interelement boundaries in this formulation.
Since there is considerable latitude in the selection of a displacement field in the interior, one selects: I) a six-mode rigid-body displacement field and 2) a general linearly independent n mode straining displacement field. Thus
where [U,] and [U2] represent the straining and the six rigid-body modes, respectively. The strains can be represented as
since the rigid-body modes generate zero strains. Likewise the Lagrangian multiplier terms at the boundary of each element can be chosen in two parts: a set corresponding to the homogeneous solution, and a set corresponding to the particular solution, respectively, of the equilibrium equation. Thus, for sach element, one can write
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
20 S. Atluri and T. H. H. Pion
where [ R , ] and [R2 ] correspond to homogeneous and particular solutions, respectively. As will be shown later, it is better to have the dimensions of { a ) and ( a ) in Eq. (79) equal to those of { P } and 18) . respectively, as in Eq. (77). \ ,
Further, the prescribed edge displacement field is represented in terms of a finite number of nodal displacements { q } as
Substituting Eqs. (77). (79), and (80) in Eq. (71), one can show that
(XP)HDM- I = [ f l P i [ H ~ l { B ) - lBJ{Fl} - L B J { F ~ - LPIIPll{a} m
- uw2iw - IBI[P,I{@I + L ~ I [ C ~ I { ~ } + L ~ I [ G , I { ~ ) ) (81)
where
J ( N L , ~ . + ML.O.) ds = I B J [ ~ ~ I { ~ ) + m P 2 i { a ) + LI ) I IP~ IW} (84) co
and
In the above [C] is the elastic constant matrix, and the matrices [ P I ] and [P3] are square because of the equality of the dimensions of { a ) and {/I], and { a ) and { p ) , respectively. Since {a ) , {P I , { a ) , and {/?I. are independent for each element, taking the variations with respect to them leads to the equa- tions
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formulation of Finite-Element Methods 21
Using Eqs. (86) through (89). {/I}, {B) , {a), and { d } can each be expressed in terms of {q} only. Thus,
Hence, one can identify the element stiffness and load matrices as
and
Thus, the unknowns in the final set of matrix equations are the generalized nodal displacements.
The above model was used by Tong [22] to solve plate-bending problems. A doubly curved quadrilateral element for a shell of revolution wad developed by Atluri [I21 and successfully tested in the program STACUSS by Kotanchik [2 1 I.
3. Hybrid Displacement Model-2 (HDM-2). The requirement of inter- element displacement compatibility can also be relaxed, as suggested by Yamamoto [23], by introducing Lagrangian multiplier terms, such that the generalized displacement coordinates of the system are the integrated averages of the edge displacements rather than the nodal displacement as in the earlier two models. The functional for this model can be written as
where N, and M, are the Lagrangian multiplier terms, which can be inter- preted physically as the edge tractions for each element, and are chosen for each discrete element as
The parameters { A } can be interpreted as the generalized nodal forces for
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
22 S. Arluri and T. H. H. Pian
each element and the functions [@] are such that the edge traction { T ) of any particular kind for a particular element could be determined uniquely in terms of the relevant quantities {I) at the nodes pertaining to the edge of the element in question. The element displacement field which need not satisfy the interelement compatibility can be chosen arbitrarily for each element as
where [ U , ] and [U,] refer to straining and rigid-body modes, respectively. Neglecting, for the present, the possibility of any actual edge loadings A and R for each element, one can write Eq. (93) as
where, as before,
and
From Eq. (97), by analogy, the generalized nodal displacements correspond- ing to generalized nodal forces {A) can be defined as
and thus are the weighted integrals of the boundary displacements. Hence, maintaining the compatibility of these generalized displacements does not guarantee compatibility along the entire boundary.
Since { p } and { B ) are the only independent variables for each element, the stationarity conditions for the potential in Eq. (93) give
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formulation of Finite-Element Methods 23
and
It can be observed that Eq. (100) represents six equations of static equilibrium for the generalized forces around the element. Thus, Eq. (100) can be re- written as
and thus,
Thus, the independent generalized nodal forces for each element are (1,) only. Using Eqs. (99) and (100) one can express Eq. (93) entirely in terms of the unknown forces (1,). Thus using the generalized forces (1:) for the finite- element assembly, and since these can be subjected to independent variation, one obtains the final set of equations of the form
Thus, even though the model has been constructed with an initial assumption of element displacements, the unknowns in the final set of equations are the redundant generalized nodal forces {A:}. Since this is a matrix force method, considerable care should be exercised in the choice of the basic unknown forces {I:} such that the matrix equations are not ill-conditioned. It should be noted that in this model, even though the interelement displacement com- patibility is satisfied only on an average, interelement stress continuity is maintained. To the authors' knowledge, no shell element has been developed so far based on this model.
C. Stress Models
In this subsection, finite-element models that could be constructed through the initial assumption of equilibrium stress field within each element are studied. First, a stress model that can be constructed by applying the static geometric analogy to the "compatible displacement model" is presented. In this approach, the unknowns to be solved from the final set of equations are the nodal values of the stress functions. Two other models, involving the
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
24 S. Alluri and T. H. H. Pion
initial assumption of a stress field are also presented: in both of the models, the unknowns to be solved in the final set of equations obtained from the governing variational statement for the assembled structure are the gener- alized nodal displacements.
1. Equilibrium Stress Model-1: (ESM-I). As discussed by Pian [24], this model can be constricted directly from the compatible displacement model through the static geometric analogy as explained in Eqs. (25) through (28). where it has already been shown that there exists a direct analogy between the displacement vector u and the stress function vector H, between the rotation vector @ and the stress function vector F, between the stress-resultant vector N' and the curvature strain vector Kg, and between the stress-couple vector M" and the stretching strain vector eu. Thus. just as the C D M (where dis- placements are assumed) is used to solve for a displacement boundary-value problem in shells, an analogous model using stress functions can be used to solve a stress boundary-value problem. If the analogy between displacement variables and the stress function variables is observed, i t then follows that for similar types of functions, as are used in the CDM, the stress functions would be continuous across the interelement boundary. Even though displacement compatibility is maintained in the C D M , strains, however, are not necessarily continuous across the interelement boundary. By direct analogy, it then follows that stresses will not be continuous, but nevertheless stress equilibrium conditions are satisfied a t the interelement boundary in ESM-I, if the stress functions are analogous to the displacement functions as in CDM. Also, the unknowns in the finite-element formulation of ESM-I, are by analogy, the nodal values of stress functions. When once these are solved, the stress and strain distribution must be obtained from the derivatives of stress functions, while the displacements can only be calculated by integrating the stress displacement relations. In view of the approximate character of the stresses provided by the finite-element analysis, the deflection obtained by integration is, in general, dependent upon the chosen integration path; hence it is not a unique solution.
There are other drawbacks to this equilibrium model. In general, it is a difficult task to include the externally applied loads and moments on the shell surface in this formulation. Also it is often obscure to interpret physically the stress boundary conditions a t the edges of the shell in terms of stress func- tions.
2. Equilibrium Stress Model (ESM)-2. If in the general variational func- tional of Eq. (49, the equilibrium equiation for the shell, Eqs. (10) and (I I), are assumed apriori, the functional can be shown to reduce to
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formulation of Finite-Element Methods
In the case of a finite-element assembly of a shell, Eq. (103) can be written as
In Eq. (104), m can be interpreted as the stress a t the interelement boundary and ii as the interelement boundary displacement. If the stress field in the interior of each element is selected such that it generates interelement bound- ary tractions that are compatible with the neighboring element, the integral over Csm in Eq. (104) vanishes. Hence
Thus, the stress field that satisfies not only equilibrium, but also interelement compatibility can be chosen for each element as
where the set of functions [ R , ] can be derived from stress functions (to represent the homogeneous solution of equilibrium equations) with unknown parameters (a) and [R,] represents any stress field that is statically equivalent to the applied loads and thus is considered as known. The corresponding edge tractions are
For stress continuity along the interelement boundary, these edge tractions should be representable uniquely from a set of generalized loads a t a finite number of control points along the boundary of the element in question.
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
26 S. Atluri and T. H. H. Pian
Thus, (7') should be expressible as
where {A} are the generalized nodal loads. From Eqs. (107) and (108) there exists a unique relation
{A) = [$l-'[Rl.lb) + [91-'{R21 - [Gll{al + {G2} (109)
The matrix C, obviously is a square matrix. The corresponding generalized edge displacements {q} are defined from the equation
and thus represent weighted integral averages of the boundary displacements. Using Eqs. (106) and (1 lo), one can rewrite Eq. (105) as
where D is the matrix of elastic constants. Carrying on the integration, one can then write
Taking variations with respect to {a}, which are independent for each element, leads to an equation for a's in terms of q's. Thus, the complementary energy of the entire can be expressed in terms of the system coordinates {q*}. Setting bn, = 0 then leads to the usual matrix equations in {q*}.
To the authors' knowledge no shell element has been developed so far for this model.
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formulation of Finite-Element Methods 27
3. Hybrid Stress Model-1 (HSM-I). This hybrid stress formulation is an analog of the hybrid displacement HDM-2 model. Pian [25] used this HSM-I formulation first in plane stress and plate-bending problems.
In this method, an equilibrium stress field is assumed in the interior of each element and stress equilibrium along the interelement boundary need not be satisfied. Stress continuity along the interelement boundary is satisfied only in an average sense by introducing Lagrangian multipliers along the interele- ment boundary. These Lagrangian multipliers, which can be physically interpreted as the interelement boundary displacements, are chosen such that they are compatible with the neighboring elements. The functional for the HSM-I model can be written as
where u,, 9, (Lagrangian multipliers) can be chosen as
where [L] is a matrix of interpolation functions such that the displacement on any particular edge of the element is interpolated uniquely in terms of the nodal values {q} along that edge; these generalized nodal displacements are to be regarded as global, a "master" in the sense that they are common to and apply to all elements which share any given node. For the assumed stress field in the interior of each element. one may write
where [ R , ] represents the homogeneous solution with unknown parameters (a} and {R , ) any particular solution. The boundary tractions generated by this stress field can be written as
( T ) = [R1 ,1 {4 + {R2J (116)
The generalized nodal forces ( r } can be identified from the expression
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
and thus are equal to the integrated averages of the edge fractions. Thus, the functional for the finite-element assemblage becomes
which can be written as
Taking variations with respect to (a}, one gets the equation
[ J l l Ib l - [ G x 9 } - {J22} = 0 (121)
Solving for {a} from Eq. (121) and substituting in Eq. (120) one obtains
where
[K] = stiffness matrix for the mth element
= [Gll [J;,'lT [GtIT (123)
and
{Q} = nodal loads for the mth element
= [Gll [J;:I {J22} + {G22} ( 1 24)
Here, a comment about the particular solution (R,) in Eq. (115) is necessary. Tong and Pian [26] have shown, for plate bending, that when stress modes are so chosen that the polynomials in (R,) are of the same degree as in [R,], then
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formrdarion of Finite-Element Methods 29
the finite-element solutions will be independent of the particular solution. Tanaka [27] developed a triangular shell element, which is part of a cone, based on the above model, and which was tested successfully in the program STACUSS by Kotanchik [21].
D. Mixed Models
Thus far, finite-element models t h ~ s e d on either the assumpti o n of a displacement field or the assumption of a stress field within each element have been considered. In shell theory, it is possible t o construct finite- element models bas:d on a simultaneous assumption of a suitable combi- nation of displacement and stress fields which are mutually independent. These possibilities are explored in this subsection.
1. Models Based on Reissner's Variational Principle. If in the variational functional given by Eq. (49, one assumes a priori that the stress-strain relations (39) are fulfilled, one obtains the Reissner functional
in which u, 4, N", and M' can be varied independently. For reasons of clarity and convenience, the Reissner functional is written in its expanded form for Kirchhoff-type shell theory in orthogonal curvilinear coordinates as follows
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
S. Alluri and T. H. H. Pion
In the integrals on C, and C,, the superscript (or subscript) n is the direction normal to the local tangent of the boundary, and similarly the super (sub) script s denotes the direction along the tangent to the boundary. Also, it should be noted that the KirchhoR-reduced boundary tractions are used in the integral on C,.
In the finite-element analysis, stresses and displacements can be assumed separately for each individual element. Several different possibilities arise depending on the continuity requirements for 1) stresses and 2) displacements at the interelement boundaries so that the function n, can be defined for the finite-element assemblage. Pian and Tong [I] studied this type of problem in detail for plates.
Based on different requirements, Eq. (126) for n, can be written in different forms for finite-elcment analysis. Thus, one may write
where 2, is a constraint term of various types to allow for the various dis- continuities of stresses and displacements a t the interelement boundaries. For example, it can be seen from Eq. (126) that, if the displacements (u , , u,, and w) and the slope awlan along the normal to the boundary of the element are discontinuous, the integral over the element area leads to a delta function. But the functional n, can be written in the form of Eq. (127), if the stress resultants Nap and M"%re continuous across the interface, by including a proper I, term. On the other hand, if the displacements and normal slopes are continuous across the interface, the integral exists even if the stress resultants Nap and Map are discontinuous.
One can verify in a similar manner that the sufficient conditions for the
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theorericol Formolofion o/ Finite-Element Merhods 31
functional n, to be defined for the discrete element assemblage are given by each of the following sets of conditions, and the corresponding A. terms are indicated.
I) Continuity of us, u., and w , and Jw/Jn across the interelement boundary even though NSP and Map may be discontinuous:
2) Continuity of N"", N'", M"", M"", and the normal derivative of M"" across the interelement boundary, even though the quantities us, u,, w, and Jw/Jn are discontinuous:
3) Continuity of u, , u,, w, and M"", even though JwlJn, N " , M"" are discontinuous:
A," = I (.""E) ds 4) Continuity of us, u,, M"", M"', and M""/dn, while w, awlan, and WP are
discontinuous across the interelernent boundary:
5) Continuity of w, JwlJn, N"", and Nu, while u, u,, M"", and M"' are discontinuous across the interelement boundary:
6) Continuity of w, N"", N"', and M"", while u,, u,, and Jw/Jn are discon- tinuous across the interelement boundary:
A," = [Nn"u, + N"'u, + Mn"@,] ds I (133)
Several other combinations are possible, but they appear to be irrelevant to shell analysis. Again, it should be pointed out that several variations on the lines of hybrid models presented earlier are possible in all of the six cases presented here by relaxing the requirements on the continuity of the needed quantities in each case through a Lagrangian multiple technique.
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
32 S. Ahri and T. H. H. Pion
The Reissner functional can be further modified in shell theory as shown in the next two subsections.
2. Mixed Model 1 (MMI). In the general functional n, of Eq. (44) consider a priori I) the moment equilibrium equation [Eq. (1 I)], 2) the membrane strain-displacement relations [Eq. (18)], and 3) the constitutive relations
I t can be shown that if the usual definition N I L N z l = +(N1' + NIz) is made, the moment equilibrium equations [Eq. (1 I)] contain only M u and q" terms. Likewise if the definition e l , = E,, = +(E,, + c,,) is made, the membrane strains depend on u alone. Under the above apriori assump- tions, the general functional ri, can be shown to reduce to
- I {N.u - (M - M),+) ds - [(u - ii1.N - $.MI ds (135) Cr CD
in which u and M" can be subjected to variation and whose Euler equations are I) the stress-resultant equilibrium equation [Eq. (lo)], 2) the curvature strain-rotation relations [Eq. (19)], and 3) the boundary conditions u = 8; q5 = 4 on C, and N = N, M = Kl on C,. Thus, in the finite-element method, the displacement vector u and the moment resultants Maa (and through them q3 are assumed independently for each element. Note from the first two terms in the integral of nu, that it is defined if the displacements are discontinuous, even if the stress q" are discontinuous across the interelement boundary. O n the other hand, if w is discontinuous across the interelement boundary, the integral is defined if only the stresses are continuous. Thus, for a finite- element assemblage,
where 1, = 0 if u is continuous across the interelement boundary, and
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theorericol Formulation of Finite-Element Merhods 33
A, = I q' w,ds if u, is discontinuous but q' is continuous across the interele- ment boundary.
Several variations of the method on the lines of the hybrid methods presented earlier are possible by relaxing the various continuity conditions through a Lagrange multiplier technique. A model for a triangular shallow shell element, with linear variations of u and MZB in each element, appears to be firs: presented by Prato [28].
3. Mixed Model 2 (MMZ). If, in the general functional n, of Eq. (44) one assumes apriori I) the stress-resultant equilibrium equation [Eq. (lo)], 2) the curvature strain-displacement relation [Eq. (19)], and 3) the constitutive rela- tions
then the functional n, can be shown to reduce to
- I, {(N - N).u + M.+}ds - {(4 - $).M - ii.N)} ds (138)
in which 4 and N' are the independent variables, whose Euler equations are I) the equilibrium equations for moments [Eq. ( I I)], 2) membrane strain- displacement relations [Eq. (18)], and 3) the relevant boundary conditions. If, further, the usual assumption N1' = N Z ' is made, then one can find that
In the finite-element analysis, the rotation vector 4 and the stress resultant vector N' are assumed independently for each element. The stress resultants NaB and q" are chosen in two parts: one to satisfy the homogeneous equilib- rium equations (using stress functions as indicated in the Appendix) and the other, any particular solution.
If a Reissner-type theory is used, the vector 4 is independent of u, and since no differentiations of q' and 4 are involved in the functional nFb. the integral and hence the functional n,+ are defined even if q" o r 4 o r both are
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
TA
BL
E 1
C
lass
ificat
ion
of
Fin
ite-E
lem
ent
Met
hods
in
Lin
ear
She
ll T
heor
y
Mo
de
l V
ari
atio
na
l P
rin
ci~
le
Ass
umed
Ins
ide
Alo
ng
Int
erel
emen
t U
nkn
ow
ns
in
Eac
h E
lem
ent
Bou
ndar
v F
ina
l E
auat
ions
Com
patib
le d
ispl
ace-
m
ent
Hyb
rid
dis
plac
emen
t I
Min
imu
m p
oten
tial
ener
gy
Mo
dif
ied
po
ten
tial
ener
gy
Hyb
rid
dis
plac
emen
t I1
Eq
uili
bri
um
stre
ss
I
Eq
uili
bri
um
stre
ss
11
Hyb
rid
stre
ss 1
Mix
ed
Mo
dif
ied
pot
entia
l en
ergy
Com
plem
enta
ry
ener
gy
Mo
dif
ied
com
ple-
m
enta
ry e
nerg
y
Mo
difi
ed
com
ple-
m
enta
ry e
nerg
y
Rei
ssne
r's v
aria
- ti
on
al p
rin
cip
le
Mo
dif
ied
var
ia-
tion
al
prin
cipl
e I
Mo
dif
ied
var
ia-
tion
al
ori
nc
i~le
2
Sm
ooth
dis
plac
emen
t C
ontin
uous
dis
plac
e-
field
(u. $
5)
Sm
ooth
dis
plac
emen
t fie
ld (
u. 4)
Sm
ooth
dis
plac
emon
t fie
ld (
u. $
5)
Sm
ooth
stre
ss f
unc-
li
on
vec
tors
F. H
Eq
uili
bra
ting
S
tress
res
ulta
nts
and
mom
ents
Eq
uili
bra
ting
st
ress
res
ulta
nts
and
mom
ents
Sm
ooth
dis
plac
emen
ts.
rota
tions
. st
ress
re
sulta
nts,
and
cou
ples
Sm
ooth
dis
plac
emen
ts.
stre
ss c
oupl
es
Sm
ooth
rot
atio
ns,
men
ts a
nd r
ota
tion
s
Ass
umed
bou
ndar
y tr
actio
ns.
assu
med
\
com
patib
le d
ispl
ace-
m
ents
and
rot
atio
ns
Ass
umed
eq
uili
bra
ting
bo
unda
ry t
ract
ions
Con
tinuo
us s
tress
fu
nctio
ns F
. H
Eq
uili
bri
um
bou
nd-
ary
lract
ions
Com
patib
le d
ispl
ace-
m
ents
and
ro
tatio
ns
Sev
eral
alte
rnat
ives
ar
e po
ssib
le.
See
Eqs
(1
28)
thro
ug
h (
131)
Sev
eral
alte
rnat
ives
and
rota
tion
s
No
da
l dis
plac
emen
ts
and
rota
tion
s
Bou
ndar
y re
dund
ant
forc
es
No
da
l dis
~la
cem
cnts
are
poss
ible
. S
ee E
q. (
136)
.q
%
No
da
l val
ues
of
stre
ss f
un
clio
ns
Gen
eral
ized
no
da
l di
spla
cem
ents
and
ro
tatio
ns
No
da
l dis
plac
emen
ts
and
rota
tion
s
Sev
eral
alte
rnat
ives
>
. .
stre
ss r
esul
tant
s po
ssib
le.
See
Eq.
(14
0)
2 3
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theorerical Formrrlarion of Finire-Element Methods 35
discontinuous at the element interface. If a Kirchhoff-type theory is used, the first term in the integral in Eq. (139) is
Thus, as has been discussed before, the functional n,,., using a Kirchhoff-type theory can be written as
where A, = 0 if w is continuous across the element interface and 2, = jqSw,ds if w is discontinuous but q' is continuous across the interface. To the authors' knowledge no such element has been developed for shells.
SUMMARY
A general first-order shell theory including tranverse shear strains and couple stress-strain couples, a general variational principle and its static geometric analog are discussed in tensor form. A systematic classification of the various possible finite-element models, depending on an initial assump- tion of the element displacement field (displacement models) or the stress field (stress models), or a proper combination of both (mixed models) is made, and is summarized in Table I for convenience.
APPENDIX
The expressions for individual physical components of strain in terms of the physical displacement components and for the individual physical com- ponents of stress and moment resultants in terms of physical stress function components are given for both Reissner- and Kirchhoff-type shell theories.
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
36 S. Atluri and T. H. H. Pion
Orthogonal curvilinear coordinates (not necessarily line o f curvature coordi- nates) are considered. In what follows, the notations
are employed.
A. Strain Displacement Relations of a Reissner-Type Theory
The relations given by Eqs. (18) and (19) can be expanded as
One could make the usual hypothesis z , , = &,, = + ( E , , + E,,) and get
from which
Likewise,
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formulation of Finite-Element Methods 37
Thus, in the modified Reissner-type theory, when the strain tensor is made symmetric, the only independent displacement measures are u', w, $,, and $,, the third rotation component R being expressed in terms of u" and w.
B. Strain Displacement Relations for Kirchhoff-Type Theory
Under the constraint condition the transverse shear strains y = 0, it follows from Eq. (33) that
Also, if the tensor E , ~ is made symmetric as before,
Hence the only independent displacement measures are u" and w. The strain displacement relations then become
I du u aa w = - - ! + - I + - . , e l , = - T + - - I au, U , aa, +- w a , 85' a,a,a€' R , , a 2 a t a la , atL R,,
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
38 S. Afhri and T. H. H. Pion
It is to be observed that even when the Kirchhofl'assumption is made, the couple strains 1, do not vanish identically. Thus,
But by appropriate modifications in the constitutive relations, the effect of couple strains can be ignored.
C. Stress-Stress Function Relations for a Reissner-Type Theory
From the static geometric analogy as given by Eqs. (26) and (27), we can write, in component form,
If one makes the usual hypothesis that M , , = M , , = + ( M I , + M , , ) and
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formularion of Finite-Elemenr Merhods
N 1 2 = N, , = + ( N , , + N,, ) , one can write
I dH, Hz da, I dH2 M , , = M 2 , = -- a , d t l a , a 2 d t 1 a 2 d t 2
from which
and
l a , a N , , = N, , =
I N , ~ F, +-- - - - J (A.13) 2 ~ , at1 (3 2 a 2 at2 (J (it, R'J
Thus, in a modified Reissner-type theory when the stress tensor is made symmetric, the only independent stress functions are H,, K, and F,, with the function J being expressed in terms of (H,,K) as above.
D. Stress-Stress Function Relations for the Kirchhoff-Type Theory
Here, under the constraint that the couple-stress stress couples P. vanish, it follows from Eq. (34) that
Again if Ma# is made symmetric, one sees, as above, that
Thus, the only independent stress functions are H, and K. Thus,
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
S. Atluri and T. H . H. Pian
(A. 16)
REFERENCES
I. T. H. H. Pian and Pin Tong, Basis of finite element methods for solid continua, lnl. J. Numer. Melh. Eng. 1 : 3-28 (1969).
2. B. E. Green, D. R. Strome. and R. C. Weikel. A~dica l ion of the stiffness method to the an3lyrls ul shell itructurcs. ASML: Pawr No. 61, AV-58. Mar. 1961.
3. C. P. Johnson. I hc anal,sir of thin shells hy a tinltc clement procedure. Ph. D. Thesis. Dep. Civil Eng., Univ. California, Berkeley, 1967.
4. P. E. Grafton, and D. R. Strome, Analysis ofaxisymmetrical shells by the direct stiff- ness method, AIAA J. 1 (10): 2342-2347 (1963).
5. J. H. Percy, T. H. H. Pian, D. R. Navaratna, and S. Klein, Application of the matrix displacement method to the linear elastic analysis of shells of revolution, Massa- chusetts Institute of Technology, Tech. Rep. ASRL TR 121-7, Jan. 1965.
6. R. W. Clough, and Y. Rashid, Finite element analysis ofanisymmetric solids, ASCE Eng. Mech. Div. 3.91 (EMI): 71-85 (1965).
7. E. L. Wilson, Structural analysis of axisymmetric solid, AIAA Paper No. 65-163, Jan. 1965.
8. G. Cantin and R. W. Clough, A curved cylindrical-shell finite element, AIAA 3. 6 (6): 1057-1062 (1968).
9. F. K. Bogner, R. L. Fox, and L. A. Schmidt, A cylindrical shell discrete element, AIAA J. 5 (4): 745-750 (1967).
10. M. D. Olson and G. M. Lindberg. Vibration analysis of cantilevered curved plates using a new cylindrical shell finite&ment, presented at the 2nd Conf. Matrix ~ e t h o d s in Structural Mechanics, Wright-Patterson AFB, Ohio, Oct. 1968.
11. S. W. Key and 2. E. ~eisinger, The analysis of thin shells with transverse shear strains by the finite element method, presented at the 2nd Conf. Matrix Methods in Structural Mechanics, Wright-Patterson AFB, Ohio, Oct. 1968.
12. S. Atluri. Static analysis of shells of revolution using doublysurved quadrilateral elements derived from alternate variational models. Tech. Rep. SAMSO TR 69-394. Norton Air Force Base, June 1969.
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011
Theoretical Formulation of Finite-Element Melhods 41
13. Pin Tong and T. H. H. Pian, The convergence of finite-element method in solving linear elastic problems, Int. J. Solids Srruet. 3 : 865-879 (1967).
14. E. Reissner, On the foundations of the theory of elastic shells, Proc. 11th lnt. Congr. Appl. Mech. (1964), pp. 20-30 (1966).
15. W. Gunther, Analoge Systeme von Schalen-Gleichungen, Iwenieur-Arehiv. 30: 160-186.
16. K. Washizu, Voriotional Methods in Elasticity and Plasticity, Pergamon Press, New York, 1968.
17. H. C. Hu, On some variational principles in the theory of elasticity and plasticity, Scintio Sinico 4 (I): 33-54 (1955).
18. K. Washizu, On the variational principle of elasticity and plasticity, Massachusetts Institute of Technology, Aeroelastic and Structures Res. Lab., Tech. Rep. ASRL TR 25-18, Mar. 1955.
19. E. Reissner, On some variational theorems in elasticity, in Problems of Conrinuum Mechanics (Mushkelishvilli Anniversary Volume), 1961, p. 370 (Soc. Ind. Appl. Math.).
20. R. J. Melash, Basis for derivation of matrices for the direct stiffness method, AIAA I. 1: 1631-1637 (1963).
21. J. J. Kotanchik and B. A. Berg, STACUSS I : A discrete element program far the static analysis of single-layer curved stiffened shells subjected to mechanical and thermal loads, Massachusetts Institute of Technology, Aeroelastic and Structures Res. Lab., Tech. Rep. ASRL TR 1469.
22. Pin Tong, New displacement hybrid finite element model for solid continua, Inr. I. Numer. Meth. Em. 2 : 78-83.
23. Y. Yamamoto, formulation of matrix displacement method, Dep. Aeronautics and Astronautics Rep., Massachusetts lnstitute of Technology, 1966.
24. T. H. H. Pian, in Recenr Advances in Matrix Methods of Srrucrurol Analysis andDesign, I970 (Proc. US-Japan Seminar on Matrix Methods in Structural Analysis and Design, Tokyo, 1969, R. H. Gallagher, Y. Yamada, and J. T. Oden, eds.); also in For- mulorions ofFinife Elemenr Merhodsfor Solid Conrinun, University of Alabama Press, Tusculoosa (to be published).
25. T. H. H. Pian, Element stiffness matricesfor boundarycompatibility and for prescribed boundarv stresses. Proe. Conf. Matrix Methods in Structural Mechanics. AFFDL TR 66-80, pp. 427-479.
26. Pin Tone and T. H. H. Pian. The convereence of finite element method in solvinn - - - linear elastic problems, Inr. J . Solidr Sfrud. 3 : 865-879 (1967).
27. M. Tanaka. Develooment and evaluation of a trianaular thin shell element based uoon - the hybrid assumed stress model, Ph. D. Thesis, Dep. Aeronautics and Astronautics, Massachusetts Institute of Technoloav. June 1970. .. .
28. C. Prato, A mixed finite element method for thin shell analysis, Ph. D. Thesis, Dep. Civil Eng., Massachusetts lnstitute of Technology, 1968.
Received March 7 , I971
Downloaded By: [McInnerny, Clare][informa internal users] At: 11:26 23 March 2011