mechanical & industrial engineering - epikentro · 5 mechanical engineering this text provides...
TRANSCRIPT
1
Mechanical & Industrial Engineering
2010
Mechanical EngineeringARIS .....................................................................................................................1 Beer: Vector Mechanics for Engineers: Statics & Dynamics, 9/e .........................2Costanzo: Engineering Mechanics: Statics & Dynamics, 1/e ...............................3 Jensen: Engineering Drawing and Design, 7/e ....................................................4 Bertoline: Fundamentals of Graphics Communication, 6/e ..................................4Beer: Mechanics of Materials, 5/e ........................................................................5 Smith: Foundations of Materials Science and Engineering, 5/e ...........................5 Cengel: Fundamentals of Thermal-Fluid Sciences, 3/e .......................................6Cengel: Thermodynamics, 7/e .............................................................................6 Cengel: Heat and Mass Transfer, 4/e ...................................................................7 Holman: Heat Transfer, 10/e ................................................................................7 Cengel: Fluid Mechanics, 2/e ...............................................................................8 White: Fluid Mechanics, 7/e .................................................................................8Norton: Kinematics and Dynamics of Machinery, 1/e ...........................................9 Budynas: Shigley’s Mechanical Engineering Design, 9/e .....................................9 Dieter: Engineering Design, 4/e ...........................................................................9
Industrial EngineeringChapra: Applied Numerical Methods with MATLAB for Engineers and Scientists, 2/e ..................................................................10 Chapra: Numerical Methods for Engineers, 6/e .................................................10Navidi: Principles of Statistics for Engineers and Scientists, 1/e .......................11 Navidi: Statistics for Engineers and Scientists, 3/e ............................................11Blank: Basics of Engineering Economy, 1/e .......................................................12Blank: Engineering Economy, 6/e ......................................................................12Hillier: Introduction to Operations Research, 9/e ...............................................13Kelton: Simulation with Arena, 5/e .....................................................................14Law: Simulation Modeling and Analysis, 4/e ......................................................15Eide: Engineering Fundamentals and Problem Solving, 5/e ..............................16Musto: Engineering Computations, 1/e ..............................................................16Martin: Introduction to Engineering Ethics, 2/e ..................................................16Palm: Introduction to MATLAB for Engineering, 3/e ...........................................16 Palm: System Dynamics, 2/e .............................................................................16Anderson: Fundamentals of Aerodynamics, 5/e ................................................16Anderson: Introduction to Flight, 6/e ..................................................................16Ullman: The Mechanical Design Process, 4/e ....................................................16McGraw-Hill BEST-Basic Engineering Series and Tools .....................................16 Connect ..........................................................................................................17
Table of Contents
www.successinhighered.comWe are pleased to announce the launch of the McGraw-Hill Higher Education Success sites.
These sites will provide you with a consistent, one-stop shop, for finding new Science,
Engineering, and Math titles, accompanying digital offerings, related marketing webinars/
events, and seasonal promotions.
To checkout all subject-specific success sites, go to www.successinhighered.com and find
out how you and your students can prepare for success in the course!
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
1
Assessment, Review, and Instruction System, also known as ARIS, is an electronic homework and course management system designed for greater flexibility, power, and ease of use than any other system. Whether you are looking for a preplanned course or one you can customize to fit your course needs, ARIS is your solution.
You may be asking yourself, “Why should I use an electronic homework system? Why ARIS? Simply stated, ARIS provides instructors with a complete course management freedom to:
• Go beyond the limits of print: Students have 24-hour access to practice sets and smart tutorial feedback to master curricular goals. Some courses’ practice sets can be algorithmically
generated providing virtually unlimited practice. Students also have access to animations, videos and simulations.
• Spend more time teaching: Tired of spending most of your time creating and grading homework? With ARIS, building quizzes, homework assignments, tests, etc. is only a few clicks away. If you don’t want to create your own content you can also choose pre-built assignments or import content from other sources, including WebCT and Blackboard. And of course, assignments are automatically graded. You may never need to grade homework again!
• Know exactly where your students stand: ARIS’ gradebook functionality is extremely versatile and allows you to manipulate data with different views and sorts to track student
progress. View student scores in real-time, identify areas where they are struggling, and build your assignments and lecture accordingly.
• Control the communication and content of your course: Enhance your communication with students via ARIS through posting announcements, attaching documents, hosting chat sessions, and email. Easily control the direction of your course and make sure other instructors, adjuncts, part timers, and TAs are “on the same page” by creating a master syllabus.
www.mharis.com
2
Me
ch
an
ica
l E
ng
ine
eri
ng
Table of contents1: Introduction 2: Statics of Particles 3: Rigid Bodies: Equivalent Systems of Forces 4: Equilibrium of Rigid Bodies 5: Distributed Forces: Centroids and Centers of Gravity 6: Analysis of Structures 7: Forces in Beams and Cables 8: Friction 9: Distributed Forces: Moments of Inertia 10: Method of Virtual Work 11: Kinematics of Particles 12: Kinetics of Particles: Newton’s Second Law 13: Kinetics of Particles: Energy and Momentum Methods 14: Systems of Particles
15: Kinematics of Rigid Bodies 16: Plane Motion of Rigid Bodies: Forces and Accelerations 17: Plane Motion of Rigid Bodies: Energy and Momentum
Methods18: Kinetics of Rigid Bodies in Three Dimensions 19: Mechanical Vibrations
Supplements978-0-07-730366-2 (Instructor’s Solutions Manual: Dynamics Vol. 1 and 2)978-0-07-730367-9 (Instructor’s Solutions Manual: Statics Vol. 1 and 2)
The Beer/Johnston textbooks introduced significantpedagogical innovations into engineering mechanics teaching. The consistent, accurate problem-solving
methodology gives your students the best opportunity
to learn statics and dynamics. At the same time, the careful presentation of content, unmatched levels of accuracy, and attention to detail have made these texts the standard for excellence.
Features
• A Careful, Step-By-Step Presentation is followed in each lesson of each chapter, and every chapter starts with a real-life example and an outline previewing the chapter objectives and lessons. Each lesson is accompanied by sample problems and Solving Problems On Your Own boxes that prepare students for the problem sets. Each chapter finishes with a brief Review Problem set and an assortment of computer and design problems.
• Well-Respected Sample Problems are a signature Beer and Johnston text feature that allow students to see important key problem types and with the solution laid out on a single page, organized to provide a potent model for student problem solving.
• Instructor’s Solutions Manual offers a clear type-set presentation and organization of problem solutions. Instructors are provided with assignment grids, designed so that instructors can assign different homework problems each semester for up to six semesters.
• Computer and Design Problems are offered at the end of each chapter using programs like MATLAB, Mathcad, and Maple, etc.
• McGraw-Hill’s web-based Hands-on Mechanics teaching demonstration library provides instructors with instructions for building hands-on physical models used to demonstrate important statics and dynamics concepts in class.
Vector Mechanics for Engineers: Statics and Dynamics, 9/e
Ferdinand P. Beer, (deceased)E. Russell Johnston, Jr., University of Connecticut David Mazurek, U.S. Coast Guard AcademyPhillip J. Cornwell, Rose-Hulman Institute of Technology Elliot R. Eisenberg, Pennsylvania State University
www.mhhe.com/beerjohnston2010 • 978-0-07-727555-6 • 1,376 pages
NEW
3
Table of contentsStatics
1: Introduction2: Vectors: Force and Position3: Equilibrium of Particles4: Moment of a Force and Equivalent Force Systems5: Equilibrium of Bodies6: Structural Analysis and Machines7: Centroids and Distributed Force Systems8: Internal Forces9: Friction10: Moments of Inertia
Dynamics
1: Setting the Stage for the Study of Dynamics2: Particle Kinematics3: Force and Acceleration Methods for Particles4: Energy Methods for Particles5: Momentum Methods for Particles6: Planar Rigid Body Kinematics7: Newton-Euler Equations for Planar Rigid Body Motion8: Energy and Momentum Methods for Rigid Bodies9: Mechanical Vibrations10: Three-Dimensional Dynamics of Rigid Bodies (chapter
available online)
Engineering Mechanics: Statics & Dynamics presents the
fundamental concepts clearly, in a modern context
using applications and pedagogical devices that
connect with today’s students. The first new mainstream text in engineering mechanics in nearly twenty years, Plesha’s Engineering Mechanics: Statics and Dynamics will help your students learn this important material efficientlyand effectively.
Features• Problem Solving Methodology used in all example
problems: A consistent problem-solving approach is used throughout. Each example problem is solved using a “template” that helps students effectively set up the problem and solve it correctly.
• Introduces Appropriate Use of Computational Tools:
Fundamental concepts are taught thoroughly, and the use of computational tools is taught when appropriate.
• Appropriate Design Coverage: The authors have brought engineering design considerations into selected problems where applicable. This will sensitize students to the fact that engineering problems do not have a single answer and many different routes lead to a correct solution.
• Real World Examples, Problems, Applications,
Photographs: All the photographs, applications, examples are from the real world, so that students will be able to identify circumstances that they encounter in there daily lives.
• Online Homework features selected problems from the text and algorithmically-generated problems that give the instructor a wide array of homework assignment options.
Engineering Mechanics: Statics and Dynamics, 1/e
Francesco Costanzo, Penn State University Michael E. Plesha, University of Wisconsin-Madison Gary L. Gray, Penn State University
www.mhhe.com/pgc2010 • 978-0-07-730200-9 • 704 pages
Me
ch
an
ica
l E
ng
ine
eri
ng
NEW
4
Me
ch
an
ica
l E
ng
ine
eri
ng
A thoroughly contemporary approach to teaching essential engineering graphics skills has made Bertoline’s a leading textbook in introductory engineering graphics courses. The sixth edition continues to integrate design concepts and the use of CAD into its outstanding
coverage of the basic visualization and sketching techniques that enable students
to create and communicate graphic ideas effectively. As in past editions, the authors have included many examples of how graphics communication pertains to “real-world” engineering design, including current industry practices and breakthroughs.
Features• New 3-D solid modeling documentation and sketches are presented with new learning activities, as well as discussions of
standards and CAD data exchange. The 3-D solid modeling activities focus on the assembly, design, and function of products through the inclusion of new assembly modeling projects.
• New and revised exercises and end-of-chapter problems also emphasize visualization, graphical and spatial problem solving through the use of interactive solid modeling, sketching and related documentation.
• Website provides additional resources such as an image library, animations and quizzes.
Fundamentals of Graphics Communication, 6/e
Gary R. Bertoline, Purdue University Eric N. Wiebe, North Carolina State University Nathan W. Hartman, Purdue University William A. Ross, Purdue University
www.mhhe.com/bertoline2010 • 978-0-07-122179-5 • 800 pages
Table of contents1: Introduction to Graphics Communication 2: Sketching 3: Engineering Geometry 4: Modeling Fundamentals 5: Multiviews and Visualization
6: Auxiliary Views 7: Pictorial Projections 8: Section Views 9: Dimensioning and Tolerancing Practices
10: Geometric Dimensioning and Tolerancing (GDT)
11: Working Drawings and Assemblies 12: Design Problems
This text combines engineering graphics and drafting in one accessible product. It is a 4-color text covers the most current technical information available, including graphic communication, CAD, functional drafting, material positioning, numerical control, electronic drafting, and metrication, in a manner useful to both the instructor and student. The authors synthesize, simplify, and convert complex drafting standards and
procedures into understandable instructional units.
Engineering Drawing and Design, 7/e
Cecil H. Jensen
Jay D. Helsel, California University of PennsylvaniaDennis R. Short, Purdue University
www.mhhe.com/jensen2008 • 978-0-07-128420-2 • 1,056 pages
Table of contents1: Engineering Graphics as a Language 2: Computer-Aided Drawing (CAD) 3: Drawing Media, Filing, Storage, and
Reproduction 4: Basic Drafting Skills 5: Applied Geometry 6: Theory of Shape Description 7: Auxiliary Views and Revolutions 8: Basic Dimensioning 9: Sections10: Threaded Fasteners
11: Miscellaneous Types of Fasteners 12: Manufacturing Materials 13: Forming Processes14: Detail and Assembly Drawings 15: Pictorial Drawings 16: Geometric Dimensioning and Tolerancing 17: Drawings for Numerical Control 18: Welding Drawings 19: Design Concepts20: Belts, Chains, and Gears 21: Coupling, Bearings, and Seals
22: Cams, Linkages, and Actuators23: Developments and Intersections 24: Pipe Drawings 25: Structural Drafting 26: Jigs and Fixtures 27: Electrical and Electronics Drawings
Supplements978-0-07-331932-2 (Drawing Workbook)
NEW
5
Me
ch
an
ica
l E
ng
ine
eri
ng
This text provides an eminently readable and understandable overview of engineering
materials for undergraduate students. This edition offers a fully revised chemistry chapter and a new chapter on biomaterials. Through concise explanations, numerous worked-out examples, a wealth of illustrations & photos, and a brand new set of online resources, the new edition provides the most student-friendly introduction to the science & engineering of materials.
Features• A concise, readable style is used throughout; readers are given understandable explanations without the excessive detail
other textbooks routinely include.
• Over 1,200 end-of-chapter problems and over 180 Materials Selection and Design problems.
• Virtual labs, which provide interactive quizzes, animations, and video on essential material science processes are included on the book website along with lecture PPT files, sample syllabi, animations and tutorials.
Foundations of Materials Science and Engineering, 5/e
William F. Smith, University of Central Florida Javad Hashemi, Texas Technical University
www.mhhe.com/smithmaterials52009 • 978-0-07-352924-0 • 1,056 pages
Table of contents1: Introduction to Materials Science and Engineering 2: Atomic Structure and Bonding 3: Crystal and Amorphous Structures in Materials 4: Solidification, Crystalline Imperfections 5: Thermally Activated Processes and Diffusion in Solids 6: Mechanical Properties of Metals I 7: Mechanical Properties of Metals II 8: Phase Diagrams
9: Engineering Alloys 10: Polymeric Materials 11: Ceramics 12: Composite Materials 13: Corrosion 14: Electrical Properties of Materials 15: Optical Properties and Superconductive Materials 16: Magnetic Properties
6
The best-selling Fundamentals of Thermal-Fluid Sciences is designed for the non-
mechanical engineering student who needs exposure to key concepts in the thermal sciences in order to pass the Fundamentals of Engineering (FE) Exam. The text is made up of Thermodynamics, Heat Transfer and Fluids. Like all the other Cengel texts, it uses a similar pedagogical approach, by using familiar everyday examples followed by theory and analysis.
Fundamentals of Thermal-Fluid Sciences, 3/e
Yunus A. Cengel, University of Nevada-Reno Robert H. Turner, University of Nevada-RenoJohn M. Cimbala, The Pennsylvania State University
www.mhhe.com/cengel2008 • 978-0-07-126631-4 • 1,152 pages
Me
ch
an
ica
l E
ng
ine
eri
ng
Thermodynamics, 7/e covers the basic principles of thermodynamics while presenting a wealth of real-world engineering examples so students get a feel for how thermodynamics is applied in engineering practice. This text helps students develop an
intuitive understanding of thermodynamics by emphasizing the physics and physical arguments. The authors explore the various facets of thermodynamics through careful explanations of concepts and its use of numerous practical examples and figures, having students develop necessary skills to bridge the gap between knowledge and the
confidence to properly apply knowledge.
Features• A substantial portion of homework problems have been revised or are new to the seventh edition.
• The 1st Law of Thermodynamics is introduced early in Chapter 2: Energy, Energy Transfer, and General Energy Analysis.
• This text features more illustrations and photographs than other books in this category.
• Connect website: Connect is a powerful, web-based assignment management system that makes creating and grading assignments easy for instructors and learning convenient for students.
Thermodynamics: An Engineering Approach, 7/e
Yunus A. Cengel, University of Nevada-Reno Michael A. Boles, North Carolina State University-Raleigh
www.mhhe.com/cengel2010 • 978-0-07-736674-2 • 1,056 pages
Table of contents1: Introduction and Basic Concepts 2: Energy Conversion and General Energy Analysis 3: Properties of Pure Substances 4: Energy Analysis of Closed Systems 5: Mass and Energy Analysis of Control Volumes 6: The Second Law of Thermodynamics 7: Entropy 8: Energy: A Measure of Work Potential 9: Gas Power Cycles
10: Vapor and Combined Power Cycles 11: Refrigeration Cycles 12: Thermodynamic Property Relations 13: Gas Mixtures 14: Gas Vapor Mixtures and Air-Conditioning 15: Chemical Reactions 16: Chemical and Phase Equilibrium 17: Compressible Flow
NEW
Table of contents1: Introduction and Overview2: Basic Concepts of Thermodynamics3: Properties of Pure Substances4: Energy Transfer by Heat, Work, and Mass5: The First Law of Thermodynamics6: The Second Law of Thermodynamics7: Entropy8: Power and Refrigeration Cycles9: Gas Mixtures and Psychrometrics10: Properties of Fluids11: Fluid Statics12: Momentum Analysis of Flow Structures
13: Bernoulli and Energy Equations14: Flow in Pipes15: Flow Over Bodies: Drag and Lift16: Mechanisms of Heat Transfer17: Steady Heat Conduction18: Transient Heat Conduction19: Forced Convection20: Natural Convection21: Fundamentals of Thermal Radiation22: Radiation Heat Transfer23: Heat Exchanges
7
Me
ch
an
ica
l E
ng
ine
eri
ng
With complete coverage of the basic principles of heat transfer and a broad range of applications in a flexible format, Heat and Mass Transfer, 4/e provides the perfect blend
of fundamentals and applications. The text provides a highly intuitive and practical understanding of the material by emphasizing the physics and the underlying physical phenomena involved. This text covers the standard topics of heat transfer with an emphasis on physics and real-world every day applications, while de-emphasizing the intimidating heavy mathematical aspects. This approach is designed to take advantage of students’ intuition, making the learning process easier and more engaging.
Features• 50% of the Homework Problems including design, computer, essay, lab-type, and FE problems are new or revised to this edition.
• More than 1,000 illustrations. This text has a sensational visual appeal.
• EES (Engineering Equation Solver) DVD packaged free with text. EES is a powerful equation solver with built-in functions and property tables for thermodynamics and transport properties as well as automatic unit checking capability.
Heat and Mass Transfer: Fundamentals and Applications, 4/e
Yunus A. Cengel, University of Nevada-Reno Afshin J. Ghajar, Oklahoma State University-Stillwater
www.mhhe.com/cengel2010 • 978-0-07-736664-3 • 928 pages
As one of the most popular heat transfer texts, Jack Holman’s Heat Transfer is noted for its clarity, accessible approach, and inclusion of many examples and problem sets. The new tenth edition retains the straight-forward, to-the-point writing style while
covering both analytical and empirical approaches to the subject. Throughout the book, emphasis is placed on physical understanding while, at the same time, relying on meaningful experimental data in those situations that do not permit a simple analytical solution. New examples and templates provide students with updated resources for computer-numerical solutions.
Features:• New and revised homework problems have been added throughout.
• Numerous calculation tables are offered in Chapter 12 as an aid in preliminary design work. The chapter also features 11 new examples illustrating the use of these charts.
• All Excel templates are available on the book website so that information need not be re-keyed. The website also includes special Excel graphical templates and an MS Word symbol keyboard template to facilitate direct keyboarding of symbols and the immediate setup of 3D charts.
Heat Transfer, 10/e
Jack P. Holman, Southern Methodist University
www.mhhe.com/holman2010 • 978-0-07-126769-4 • 752 pages
Table of contents1: Introduction and Basic Concepts 2: Heat Conduction Equation 3: Steady Heat Conduction 4: Transient Heat Conduction 5: Numerical Methods in Heat Conduction 6: Fundamentals of Convection 7: External Forced Convection
8: Internal Forced Convection 9: Natural Convection 10: Boiling and Condensation 11: Heat Exchangers 12: Fundamentals of Thermal Radiation 13: Radiation Heat Transfer 14: Mass Transfer
Table of contents1: Introduction 2: Steady-State Conduction--One Dimension 3: Steady-State Conduction--Multiple Dimensions 4: Unsteady-State Conduction 5: Principles of Convection 6: Empircal and Practical Relations for Forced-Convection Heat
Transfer
7: Natural Convection Systems 8: Radiation Heat Transfer 9: Condensation and Boiling Heat Transfer 10: Heat Exchangers 11: Mass Transfer 12: Summary and Design Information
NEW
NEW
8
Me
ch
an
ica
l E
ng
ine
eri
ng
The seventh edition of White’s Fluid Mechanics offers students a clear and comprehensive
presentation of the material that demonstrates the progression from physical concepts to engineering applications and helps students quickly see the practical importance of fluidmechanics fundamentals. The wide variety of topics gives instructors many options for their course and is a useful resource to students long after graduation.
Features• Over 200 new problems have been added throughout the text.
• Excellent progression from physical concepts to engineering applications.
• The problem-solving approach is presented at the start of the book and carefully integrated in all examples.
• EES software (Engineering Equation Solver) is provided with the text.
Fluid Mechanics, 7/e
Frank M. White, University of Rhode Island-Kingston
www.mhhe.com/white7e2010 • 978-0-07-352934-9 • 896 pages
Table of contents1: Introduction 2: Pressure Distribution in a Fluid 3: Integral Relations for a Control Volume 4: Differential Relations for Fluid Flow 5: Dimensional Analysis and Similarity 6: Viscous Flow in Ducts
7: Flow past Immersed Bodies 8: Potential Flow and Computational Fluid Dynamics 9: Compressible Flow 10: Open-Channel Flow 11: Turbomachinery
NEW
Fluid Mechanics, 2/e communicates directly with tomorrow’s engineers in a simple yet precise manner. The text covers the basic principles and equations of fluid mechanics
in the context of numerous and diverse real-world engineering examples. It helps students develop an intuitive understanding of fluid mechanics by emphasizing the physics, using figures, numerous photographs and visual aids to reinforce the basic concepts.
Features• Features more illustrations and photographs than other fluid mechanics text.
• Topic flexibility to facilitate different approaches to the course.
• Application Spotlights--real-world applications of fluid mechanics are featured in many chapters.
• Our text contains over 1,600 homework problems.
Fluid Mechanics: Fundamentals and Applications, 2/e
Yunus A. Cengel, University of Nevada-RenoJohn M. Cimbala, Pennsylvania State University
www.mhhe.com/cengel2009 • 978-0-07-128421-9 • 992 pages
Table of contents1: Introduction and Basic Concepts 2: Properties of Fluids 3: Pressure and Fluid Statics 4: Fluid Kinematics 5: Bernoulli and Energy Equations 6: Momentum and Analysis of Flow Systems 7: Dimensional Analysis and Flow Systems 8: Flow in Pipes
9: Differential Analysis of Fluid Flow 10: Approximations of the Navier-Stokes Equation 11: Flow Over Bodies: Drag and Lift 12: Compressible Flow 13: Open-Channel Flow 14: Turbomachinery 15: Computational Fluid Dynamics (CFD)
9
Me
ch
an
ica
l E
ng
ine
eri
ng
In covering the kinematics and dynamics of machinery topics, this book emphasizes
the synthesis and design aspects and the use of computer-aided engineering. A sincere attempt has been made to convey the art of the design process to students in order to prepare them to cope with real engineering problems in practice. Kinematics and Dynamics of Machinery, 1/e provides up-to-date methods and techniques for analysis and synthesis that take full advantage of the graphics microcomputer by emphasizing design as well as analysis. In addition, it details a more complete, modern, and thorough treatment of cam design than existing texts in print on the subject.
Kinematics and Dynamics of Machinery, 1/e
Robert L. Norton, Worcester Polytechnic Institute
www.designofmachinery.com2009 • 978-0-07-127852-2 • 800 pages
The ninth edition of Shigley’s Mechanical Engineering Design maintains the approach that has made this book the standard in machine design for nearly 50 years. It is intended for students beginning the study of mechanical engineering design. Students will find that the
text inherently directs them into familiarity with both the basics of design decisions
and the standards of industrial components. It combines the straightforward focus on fundamentals that instructors have come to expect, with a modern emphasis on design and new applications.
Shigley’s Mechanical Engineering Design, 9/e
Richard G. Budynas, Rochester Institute of Technology Keith J. Nisbett, Misouri University of Science & Technology
www.mhhe.com/shigley 2010 • 978-0-07-352928-8 • 1,088 pages
Dieter’s Engineering Design 4/e represents a major update of this classic textbook for
senior design courses. As in previous editions, this book provides a broader overview of topics than most design texts and contains much more prescriptive guidance on how to carry out design. Dieter focuses on material selection as well as how to implement
the design process.
Engineering Design, 4/e
George Dieter, University of Maryland Linda C. Schmidt, University of Maryland
www.mhhe.com/dieter2009 • 978-0-07-127189-9 • 864 pages
NEW
10
Chapra’s second edition, is written for engineers and scientists who want to learn
numerical problem solving. This text focuses on problem-solving applications rather than theory, using MATLAB throughout. This new edition features new material chapters on Numerical Differentiation Optimization and Boundary-Value Problems (ODE’s).
Applied Numerical Methods with MATLAB for Engineers and Scientists, 2/e
Steven C. Chapra, Tufts University
www.mhhe.com/chapra2008 • 978-0-07-125921-7 • 608 pages
Instructors love Numerical Methods for Engineers because it makes teaching easy! Students love it because it is written for them-with clear explanations and examples
throughout. The text features a broad array of applications that span all engineering
disciplines. The sixth edition retains the successful instructional techniques of earlier editions. Chapra and Canale’s unique approach opens each part of the text with sections called Motivation, Mathematical Background, and Orientation. This prepares the student for upcoming problems in a motivating and engaging manner. Each part closes with an Epilogue containing Trade-Offs, Important Relationships and Formulas, and Advanced Methods and Additional References. Much more than a summary, the Epilogue deepens understanding of what has been learned and provides a peek into more advanced methods.
Numerical Methods for Engineers, 6/e
Steven C. Chapra, Tufts University Raymond P. Canale, University of Michigan
www.mhhe.com/chapra2009 • 978-0-07-126759-5 • 960 pages
Table of contents1: Mathematical Modeling Numerical Methods and Problem Solving 2: MATLAB Fundamentals 3: Programming with MATLAB 4: Roundoff and Trunication Errors5: Roots: Bracketing Methods 6: Roots: Open Methods 7: Optimization8: Linear Algebraic Equations and Matrices 9: Gauss Elimination 10: LU Factorization 11: Matrix Inverse and Condition
12: Iterative Methods13: Linear Regression 14: General Linear Least-Squares and Non-Linear Regression 15: Polynomial Interpolation 16: Splines and Piecewise Interpolation17: Numerical Integration Formulas 18: Numerical Integration of Functions 19: Numerical Differentiation20: Initial-Value Problems 21: Adaptive Methods and Stiff Systems 22: Boundary-Value Problems
Table of contents1: Mathematical Modeling and Engineering Problem Solving 2: Programming and Software 3: Approximations and Round-Off Errors 4: Truncation Errors and the Taylor Series5: Bracketing Methods 6: Open Methods 7: Roots of Polynomials 8: Case Studies: Roots of Equations9: Gauss Elimination 10: LU Decomposition and Matrix Inversion 11: Special Matrices and Gauss-Seidel 12: Case Studies: Linear Algebraic Equations13: One-Dimensional Unconstrained Optimization 14: Multidimensional Unconstrained Optimization 15: Constrained Optimization 16: Case Studies: Optimization
17: Least-Squares Regression 18: Interpolation 19: Fourier Approximation 20: Case Studies: Curve Fitting21: Newton-Cotes Integration Formulas 22: Integration of Equations 23: Numerical Differentiation 24: Case Studies: Numerical Integration and Differentiation25: Runge-Kutta Methods 26: Stiffness and Multistep Methods 27: Boundary-Value and Eigenvalue Problems 28: Case Studies: Ordinary Differential Equations29: Finite Difference: Elliptic Equations 30: Finite Difference: Parabolic Equations 31: Finite-Element Method 32: Case Studies: Partial Differential Equations
Ind
ust
ria
l E
ng
ine
eri
ng
11
Principles of Statistics for Engineers and Scientists offers the same crystal clear presentation of applied statistics as Bill Navidi’s Statistics for Engineers and Scientists text, in a manner especially designed for the needs of a one-semester course that focuses on applications.The text features a unique approach accentuated by an engaging writing style that explains difficult concepts clearly. By presenting ideas in the context of real-world data featured in plentiful examples, the book motivates students to understand fundamental concepts through practical examples found in industry and research.
Features• Many examples and exercises use data from articles published in scientific journals. This motivates students by showing them
that the concepts they are learning are actually used by scientists and engineers.
• ARIS, McGraw-Hill’s Online Homework Manager, features algorithmic problems and gradebook capability. Instructors will have access to data sets, solutions, lecture PowerPoints, and images from the text.
Principles of Statistics for Engineers and Scientists, 1/e
William C. Navidi, Colorado School of Mines
www.mhhe.com/navidi2009 • 978-0-07-016697-4 • 608 pages
Table of contents1: Sampling and Descriptive Statistics 2: Summarizing Bivariate Data 3: Probability 4: Commonly Used Distributions 5: Point and Interval Estimation for a Single Sample
6: Hypothesis Tests for a Single Sample 7: Inferences for Two Samples 8: Inference in Linear Models 9: Factorial Experiments 10: Statistical Quality Control
Ind
ust
ria
l E
ng
ine
eri
ng
Statistics for Engineers and Scientists, 3/e stands out for its crystal clear presentation
of applied statistics. Suitable for a one or two semester course, the book takes a practical approach to methods of statistical modeling and data analysis that are most often used in scientific work. It features a unique approach highlighted by an engaging writing style that explains difficult concepts clearly, along with the use of contemporary real world data sets to help motivate students and show direct connections to industry and research. While focusing on practical applications of statistics, the text makes extensive use of examples to motivate fundamental concepts and to develop intuition.
Features• Over 250 new problems.
• Flexible presentation of probability addresses the needs of different courses.
• In line with modern trends, the text includes numerous examples of computer output and contains exercises suitable for
solving with computer software. These examples and exercises involve interpreting, as well as generating, computer output.
Statistics for Engineers and Scientists, 3/e
William Navidi, Colorado School of Mines
www.mhhe.com/navidi2010 • 978-0-07-122205-1 • 928 pages
Table of contents1: Sampling and Descriptive Statistics 2: Probability 3: Propagation of Error 4: Commonly Used Distributions 5: Confidence Intervals
6: Hypothesis Testing 7: Correlation and Simple Linear Regression 8: Multiple Regression 9: Factorial Experiments 10: Statistical Quality Control
NEW
12
Basics of Engineering Economy covers the basic techniques and applications of
engineering economy for all disciplines in the engineering profession. The writing style emphasizes brief, crisp coverage of the principle or technique discussed in order to reduce the time taken to present and grasp the essentials. The objective of the text is to explain and demonstrate the principles and techniques of engineering economic analysis as applied in different fields of engineering.
Features• Text integrates spreadsheets in the book.
• End-of-chapter problems.
• Information on cost estimation, depreciation and taxes has been included.
• Extended Exercises can be found in every chapter of the text.
Basics of Engineering Economy, 1/e
Leland T. Blank, Texas A&M University and American University of Sharjah, UAE Anthony J. Tarquin, University of Texas-El Paso
www.mhhe.com/blank2008 • 978-0-07-128762-3 • 432 pages
Engineering Economy, 6/e, provides undergraduate students and practicing professionals with a solid preparation in the financial understanding of engineering
problems and projects, as well as the techniques needed for evaluating and making
sound economic decisions. Information on cost estimation, depreciation, and taxes has been updated to conform to new tax laws and a majority of the end-of-chapter problems are revised or new to this edition. Distinguishing pedagogical characteristics of this market-leading text include its easy-to-read writing style, chapter objectives, worked examples, integrated spreadsheets, case studies, Fundamentals of Engineering (FE) exam questions, and numerous end-of-chapter problems.
Engineering Economy, 6/e
Leland T. Blank, Texas A&M University and American University of Sharjah, UAEAnthony Tarquin, University of Texas-El Paso
www.mhhe.com/blank6e 2005 • 978-0-07-127450-0 • 800 pages
Table of contents1: Foundations of Engineering Economy 2: Factors: How Time and Interest Effect Money 3: Nominal and Effective Interest Rates 4: Present Worth Analysis 5: Annual Worth Analysis 6: Rate of Return Analysis
7: Benefit/Cost Analysis and Public Sector Projects 8: Breakeven, Sensitivity and Payback Analysis 9: Replacement and Retention Decisions 10: Effects of Inflation 11: Estimating Costs 12: Depreciation Methods 13: After-Tax Economic Analysis
Table of contentsLevel 1: This is How It All Starts
1: Foundations of Engineering Economy 2: Factors: How Time and Interest Affect Money 3: Combining Factors 4: Nominal and Effective Interest RatesLevel 2: Tools for Evaluating Alternatives
5: Present Worth Analysis < 6: Annual Worth Analysis 7: Rate of Return Analysis: Single Alternative 8: Rate of Return Analysis: Multiple Alternatives 9: Benefit/Cost Analysis and Public Sector Economics 10: Making Choices: The Method, MARR, and Multiple AttributesLevel 3: Making Decisions on Real-World Projects
11: Replacement and Retention Decisions 12: Selection from Independent Projects Under Budget Limitation 13: Breakeven AnalysisLevel 4: Rounding Out the Study
14: Effects of Inflation 15: Cost Estimation and Indirect Cost Allocation 16: Depreciation Methods 17: After-Tax Economic Analysis 18: Formalized Sensitivity Analysis and Expected Value Decisions 19: More on Variation and Decision Making Under Risk
Supplements978-0-07-298450-7 (COSMOS CD)
Ind
ust
ria
l E
ng
ine
eri
ng
14
Ind
ust
ria
l E
ng
ine
eri
ng
Table of contents1: What is Simulation? 2: Fundamental Simulation Concepts 3: A Guided Tour Through Arena 4: Modeling Basic Operations and Inputs 5: Modeling Detailed Operations 6: Statistical Analysis of Output from Terminating Simulations 7: Intermediate Modeling and Steady-State Statistical Analysis
8: Entity Transfer 9: A Sampler of Further Modeling Issues and Techniques 10: Arena Integration and Customization 11: Continuous and Combined Discrete/Continuous Models 12: Further Statistical Issues 13: Conducting Simulation Studies
Simulation with Arena, 5/e provides a comprehensive treatment of simulation using industry-standard Arena software. The text starts by having the reader develop
simple high-level models, and then progresses to
advanced modeling and analysis. Statistical design and analysis of simulation experiments is integrated with the modeling chapters, reflecting the importance of
mathematical modeling of these activities. An informal, tutorial writing style is used to aid the beginner in fully understanding the ideas and topics presented.
Features
• Text features coverage of the latest academic version of Arena software.
• New software capabilities are included in later chapters.
• All the examples have been updated to conform to the current Arena version. The software is largely consistent with what was discussed in the fourth edition, but there are several new features and capabilities that are illustrated, including improved animated plots and string variables and attributes.
• New homework exercises have been added in most chapters and many of the existing exercises have been modified.
• Among the new exercises are health-care applications inChapters 4 and 6 and military models in Chapters 8 and 11.
• Updates for a number of Arena modules that have been modified in the current version of the software.
• Chapter 10 has a new Section 10.6 on strings and their use
in reading in character data from other sources.
• The support materials on the Web site (slides and solutions) have all been updated.
• New Exercises in all the chapters, updated with solutions in the new software.
Simulation with Arena, 5/e
W. David Kelton, University of Cincinnati Randall P. Sadowski, Systems Modeling Corporation, Rockwell Software Nancy B. Swets, Systems Modeling Corporation, Rockwell Software
www.mhhe.com/kelton 2010 • 978-0-07-126771-7 • 656 pages
NEW
15
Ind
ust
ria
l E
ng
ine
eri
ng
Table of contents1: Basic Simulation Modeling 2: Modeling Complex Systems 3: Simulation Software 4: Review of Basic Probability and Statistics 5: Building Valid, Credible, and Appropriately Detailed
Simulation Models 6: Selecting Input Probability Distributions
7: Random-Number Generators 8: Generating Random Variates 9: Output Data Analysis for a Single System 10: Comparing Alternative System Configurations11: Variance-Reduction Techniques 12: Experimental Design, Sensitivity Analysis, and Optimization 13: Simulation of Manufacturing Systems
The goal of the fourth edition of Simulation Modeling and Analysis remains the same as for the first three editions: To give a comprehensive and state-of-the-art treatment
of all the important aspects of a simulation study,
including modeling, simulation software, model verificationand validation, input modeling, random-number generators, generating random variates and processes, statistical design and analysis of simulation experiments, and to highlight major application areas such as manufacturing. The book strives to motivate intuition about simulation and modeling, as well as to present them in a technically correct yet clear manner. There are many examples and problems throughout, as well as extensive references to the simulation and related literature for further study.
Features
• A CD-ROM containing the Student Version of the ExpertFit distribution-fitting software will be included and will tie to the book.
• Up-to-date treatment of the latest simulation software,including a common example in four of the leading products.
• All of the software used in the book has been upgraded to FORTRAN and C.
• 20% new problems and examples.
• More comprehensive and practical discussion of how to validate a simulation model.
• New and improved random-number generators.
• Latest statistical techniques for estimating the performance measures of a simulated system, both for terminating and steady-state simulations.
• Ranking-and-selection procedures for choosing the best system configuration, which allow the use of common random numbers for increased efficiency.
• More detailed discussion of how to use the method of common random numbers in practice.
• Greatly expanded and self-contained discussion of classical
design of experiments, with a particular emphasis on how to correctly implement these techniques in the context of simulation modelling.
• Several detailed examples on the use of simulation-based
optimization.
Simulation Modeling and Analysis, 4/e
Averill M. Law, Averill M. Law & Associates
www.mhhe.com/law 2007 • 978-0-07-125519-6 • 792 pages
16
Ind
ust
ria
l E
ng
ine
eri
ng
Eide: Engineering Fundamentals and Problem Solving, 5/e www.mhhe.com/best 2008 • 978-0-07-110190-5 •
480 pages
Musto: Engineering Computations: An Introduction Using MATLAB and Excel www.mhhe.com/musto 2009 • 978-0-07-126357-3 •
336 pages
Palm: Introduction to MATLAB for Engineers, 3/e www.mhhe.com/palm 2010 • 978-0-07-353487-9 •
704 pages
Palm: System Dynamics, 2/ewww.mhhe.com/palm 2009 • 978-0-07-126779-3 •
944 pages
Martin: Introduction to Engineering Ethics, 2/ewww.mhhe.com/best 2009 • 978-0-07-353487-9 •
704 pages
Ullman: The Mechanical Design Process, 4/e www.mhhe.com/ullman4e2009 • 978-0-07-126796-0 •
448 pages
Anderson: Fundamentals of Aerodynamics, 5/e www.mhhe.com/anderson 2010 • 978-0-07-128908-5 •
1,088 pages
Anderson: Introduction to Flight, 6/e www.mhhe.com/anderson 2008 • 978-0-07-126318-4 •
912 pages
NEW
NEW
McGraw-Hill’s BEST — Basic Engineering Series and Toolswww.mhhe.com/engcs/general/best
17
McGraw-Hill Education offers a variety of content solutions to help lecturers create a customized text closely matching their syllabus and students’ ability.
Create your ideal text by:Create your ideal text by:• Combining content from more than one McGraw-Hill textbook• Deleting the content you do not cover• Including special readings and cases• Adding your syllabus, lecture notes and university logo• Joining the text and study guide in one book
And, this time, add a subject-specific glossary translated in your local language!
Middle East & Africa
Aly Mahmoud(Egypt, Libya, Morocco & Tunisia)[email protected]: 0020 1 23161795Tel. /Fax: 0020 2 24534178
Mohamed Shawky(Egypt, Libya, Morocco & Tunisia)[email protected]: 0020 1 80603886Tel. /Fax: 0020 2 22705305
Haluk Baykara(Turkey, North Cyprus & Israel)[email protected]: 0090 532 3514194Tel.: 0090 312 2381369Fax: 0090 312 2381395
Sevcan Karababa(Turkey & North Cyprus)[email protected]: 0090 533 3503378Tel: 0090 312 4176458Fax: 0090 312 4176459
Faris Bukhari(Jordan, Lebanon, Syria & Palestine)[email protected]: 00962 777 44 7676
Hassan Zaza(U.A.E. & Gulf States)[email protected]: 00971 506534623Tel.: 00971 43913171Fax: 00971 43918005
Shirine Habash(U.A.E. & Gulf States)[email protected]: 00971 509034491Tel.: 00971 43913171Fax: 00971 43918005
Hussein Al-Qadi(Saudi Arabia & Yemen)[email protected]: 009665 0 4630149Tel. /Fax: 009661 4 742447
Tony MoggachIMA (Africa)[email protected].: 0044 20 72678054Fax: 0044 20 74240034/74858462
Joseph MakopeIMA (Africa)[email protected].: 00234 8089539358 / 0044 20 72678054Fax: 0044 20 74240034/74858462
Behruz Neirami(Iran)[email protected].: 0098 2188748554Fax: 0098 2188745894
Marketing Managers, MEATaline Prescott-DecieBusiness, Humanities & Social [email protected]: 00961 3 326143Tel. /Fax: 00961 4 401579
Wissam Al-Sha’arScience, Engineering & [email protected]: 00961 3 849458Tel. /Fax: 00961 5 410748
Greece, Cyprus & Malta
Yiannis PlessasSales [email protected]: 0030 6945339755Tel.: 0030210 6560990Fax: 0030210 6545525
Eastern Europe
Marek [email protected]: 0048 602 707037Tel. /Fax: 0048 22 6714819
Radek [email protected]: 00420 602 294014
Need help getting started?
Contact your representative or our Editorial Department:
Tanja Radivoevska
Tel.: 0030210 6560990
Fax: 0030210 6545525
™
www.mcgrawhillcreate.com
Craft your teaching resources to match the way you teach!
Find
Personalize
Search across and within 3 million pages of content. Full text search across all McGraw-Hill resources. Specialized search filters—by discipline, by copyright, etc.
Arrange Rearrange chapters, combine content from multiple sources, and even upload your own content.
Select your cover, add your course information, and choose either an eBook or a print book for your students.
*Receive a FREE PDF review copy in minutes!
Register TODAY and see how McGraw-Hill Create™ allows you to teach your students, your way!