mechanical engineering dtu

Upload: aedi0611

Post on 04-Jun-2018

215 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/14/2019 Mechanical Engineering DTU

    1/74

    DELHI TECHNOLOGICALUNIVERSITY

    SCHEME OF EXAMINATIONAND

    COURSE OF READINGFOR

    PROPOSED SYLLABUS

    B.Tech. (MECHANICAL ENGINEERING)

    Semeste I E!"m#$"t#%$ N%&em'e *+*Semeste II E!"m#$"t#%$ M", *++Semeste III E!"m#$"t#%$ N%&em'e *++Semeste IV E!"m#$"t#%$ M", *+Semeste V E!"m#$"t#%$ N%&em'e *+Semeste VI E!"m#$"t#%$ M", *+-Semeste VII E!"m#$"t#%$ N%&em'e *+-

    Semeste VIII E!"m#$"t#%$ M", *+

    S,//"'0s "11/#c"'/e t% the st02e$ts see3#$4 "2m#ss#%$ t% theB.Tech. (Mech"$#c"/ E$4#$ee#$4) C%0se #$ the "c"2em#c ,e"*+*.

    1

  • 8/14/2019 Mechanical Engineering DTU

    2/74

    DELHI TECHNOLOGICAL UNIVERSITYNEW SCHEME OF EXAMINATION

    1. There shall be the following four year Degree courses under the Faculty of Technology.

    i. Bachelor of Technology (Electronics & Communication)

    ii. Bachelor of Technology (Comuter)

    iii. Bachelor of Technology (Electrical)

    i!. Bachelor of Technology ("echanical)

    !. Bachelor of Technology (#roduction & $ndustrial)

    !i. Bachelor of Technology (Ci!il)

    !ii. Bachelor of Technology (En!ironmental)

    !iii. Bachelor of Technology (#olymer %cience & Chemical Technology)

    i. Bachelor ofTechnology ($nformation Technology)

    . Bachelor of Technology (Bio Technology)

    i. Bachelor of Technology (%oftware Engineering)

    ii. Bachelor of Technology (Electrical& Electronics)

    iii. Bachelor of Technology ('utomobile Engg)

    i!. Bachelor of Technology (Engineering #hysics)

    . $n addition to the conditions laid down in rdinance $* a candidate see+ing admission to any of the

    abo!e Courses of study for the Bachelor,s Degree should satisfy the following conditions.

    (a) Educational Qualifications:

    ' candidate assing any one of the following eaminations and securing - ercent or more mar+s inthe aggregate of #hysics* chemistry 'nd "athematics shall be eligible for admission to the first

    %emester of Bachelor of Technology Course ro!ided he/she has assed in each sub0ect searately

    i. %enior %chools Certificate Eamination (1 year course) of the Central Board of %econdary Education

    (C.B.%.E.)* 2ew Delhi.

    ii. $ndian %chool Certificate Eamination (1 3ear course) of the Council for $ndian %chool Certificate

    Eamination* 2ew Delhi.

    iii. B.%c. (4en.) 4rou 5', final Eamination of the 6ni!ersity of Delhi or e7ui!alent eamination.

    i!.B.%c. (8ons.) Eamination in #hysics* chemistry and "athematics of the 6ni!ersity of Delhi with

    combination of #hysics* Chemistry* "athematics and e7ual weightage to the subsidiary sub0ects ore7ui!alent eamination.

    !. 'ny other eamination recogni9ed as e7ui!alent to the %enior %chool Certificate Eamination of the

    C.B.%.E by the 6ni!ersity of Delhi.

    ' candidate must additionally ha!e assed English as a sub0ect of study at the 1 thclass le!el (core or

    electi!e)

  • 8/14/2019 Mechanical Engineering DTU

    3/74

    NOTE: There shall be no direct admission to any le!el of the Courses abo!e the $st %emester.

    ;. 6nder each B.Tech. Degree course certain sub0ects are offered which can be classified as Theory/#ractical/ Drawing/ Design/ #ro0ect/ #ractical Training. Further classification is based on the

    relationshi of the sub0ects with the degree courses admitted to* namely 8umanities and %ocial %cience/

    Basic %ciences/ 'llied engineering* Deartmental* core* etc.

    $n addition to the abo!e* a sub0ect could be classified as a comulsory one or as one of the re

  • 8/14/2019 Mechanical Engineering DTU

    4/74

    c. 'llied Engineering

    d. Deartmental Core

    e. #ractical Training

    f. 6nsecified/ Electi!e and

    g. #ro0ect.

    The committee of courses & %tudies in each Deartment shall aoint one or more E!aluation

  • 8/14/2019 Mechanical Engineering DTU

    5/74

    ' student has to secure = or more mar+s in a sub0ect e!aluation to earn the credits assigned to the

    sub0ect. ' student after ha!ing secured the minimum credit as needed for the degree course will beeligible for the award of degree. The final result will be e!aluated as below:

    Each sub0ect will carry 1 mar+s.

    =

    )Credits(

    )%ecured"ar+sCredits(mar+sa!erage

    (%ee clause @ for best grades in the minimum credits)

    The final result will be classified based on the a!erage mar+s as follows.

    First Class with Distinction @ or more

    First Class - or more but less than @

    %econd Class @ or more but less than -

    #ass Class = or more but less than @

    A. ' student has to ut in a minimum of @ attendance searately in each sub0ect for which he has

    registered. ' relaation u to a maimum of @ may be gi!en on the roduction of satisfactorye!idence that:

    (a) The student was busy in authori9ed acti!ities.

    (b) The student was ill.

    2ote:< (i) ' student should submit the e!idence to the abo!e fact within three wor+ing days of resumingthe studies. Certificates submitted later will not be considered.

    (ii) 2o relaation in attendance beyond @ is ermitted in any case.

    (iii) The registration of a student stands cancelled if his attendance re7uirements are not satisfied in

    the sub0ect.

    . The duration of the course is not less than A %emesters and the san is not more than 1= semesters.

    ' student who earn 1@ credits or less at the end of the first semester will recei!e a warning for his/heroor erformance* if he fails to earn at least @ credits at the end of the second semester* he has to lea!e

    the course and institution.

    $n case a student has not earned a minimum of 1 credits at the end of eight semester* his admission to

    the course and the institution stands cancelled. The admission stands cancelled at the end of 1= semesterin any case.

    1. The $nstitution /6ni!ersity may cancel the registration of all the sub0ects in a gi!en semester if:

    1. The student has not cleared the dues to the institution /hostel.

    . ' unishment is awarded leading to the cancellation.

    't discretion of the institution the result may be withheld e!en if the registration of the student stands.

    11. There shall be a Central 'd!isory Committee consisting of the following:

    (a) Dean* Faculty of Technology* (Chairman of the Committee)

    (b) 8eads* of the $nstitutions.

    @

  • 8/14/2019 Mechanical Engineering DTU

    6/74

    (c) 8eads of the Deartments in the Faculty of Technology.

    This Committee shall ha!e the following functions:

    (i) >ay guidelines for the rocess of registration.

    (ii) 4i!e an interretation of the rules in case of difference of oinion which shall be binding on all.

    1. 6nder !ery ecetional conditions minor relaations in rules may be allowed and imlemented by theCentral 'd!isory Committee. 8owe!er* same relaation in rules can not be granted in a subse7uent

    semester. $n case the conditions warrant such a relaation again* the rules shall ha!e to amended.

    %"n"&al Not"s:

    1. For all Theory #aers (Code:T8) there is one min

  • 8/14/2019 Mechanical Engineering DTU

    7/74

    MECHANICAL ENGINEERING DEPARTMENT

    Su''a& of !"is"d %cheme of Eamination

    Total Credits for B.Tech. degree: =

    %emester wise: $

  • 8/14/2019 Mechanical Engineering DTU

    8/74

    SUGGESTED SCHEME FOR BTech.FI!STSEMESTER

    (MECHANICAL ENGINEERING)

    (c%mm%$ t% "// '"$ches)

    S.No

    .

    Course

    No.

    Subject LT E!"#u"t$o% Tot"#

    M"r&s

    Cre'$t

    Te

    T81 "' 11 "athematicsab ; 1 8

    #?; EE

    1

    Electrical %ciences >ab ; 1 '

    #?= $T

    11

    $nformation Technology

    >ab

    ; 1 '

    TOTA *&actic" +, -&s ,,, +,

    SUGGESTED SCHEME FOR BTech. SECOND SEMESTER(MECHANICAL ENGINEERING)

    (C%mm"$ t% "// '"$ches)

    A

  • 8/14/2019 Mechanical Engineering DTU

    9/74

    S.No

    .

    Course

    No.

    Subject LT E!"#u"t$o% Tot"#

    M"r&s

    Cre'$t

    Te

    T81 "' 111 "athematicsab ; 1 '

    #?= #E 1 Gor+sho #ractice ; ; 1 ;C

    TOTA *&actic" +, -&s ,,, +,

  • 8/14/2019 Mechanical Engineering DTU

    10/74

    SUGGESTED SCHEME FOR B.Tech. THIRD SEMESTER (MECHANICAL ENGINEERING)

    S.No.

    CourseNo.

    Subject LT E!"#u"t$o%Sessional End

    Tot"#M"r&

    s

    Cre'$tTe

    H1 ME 201 THERMAL ENGINEERING - I 310 30 70 100 4C

    H2 ME 202 ENGINEERING MATERIALSAND METALLURGY

    300 30 70 100 3A

    H3 ME 203 NUMERICAL TECHNIUES 310 30 70 100 4HH4 ME 204 UANTITATI!E TECHNIUE

    "#$%o&a&ili'( ) S'a'is'i*al Me'+ods,310 30 70 100 4A

    H ME 20 ENGINEERING MECHANICS 310 30 70 100 4C

    H. ME 20. ENGINEERING EC/N/MICSAND ACC/UNTANCY

    400 30 70 100 4H

    R1 ME 207 THERMAL ENGINEERING - I ENGINEERINGMECHANICSLA

    002 30 70 100 2C

    R2 ME 20 MACHINE DRAING 002 30 70 100 2C

    R3 ME 20 ENGINEERING MATERIALS

    AND METALLURGY LA

    002 30 70 100 2A

    !S1 ME 210 SEL5 STUDY 001 30 70 100 1C

    TOTAL 30hrs

    1000 30

    1

  • 8/14/2019 Mechanical Engineering DTU

    11/74

    SUGGESTED SCHEME FOR B.Tech. FOURTH SEMESTER (MECHANICAL ENGINEERING)

    .No.

    CourseNo.

    Subject LT E!"#u"t$o%Sessional End

    Tot"#M"r&

    s

    Cre'$t

    Te

    TH1 ME 211 THERMAL ENGINEERING- II

    310 30 70 100 4C

    TH2 ME 212 5LUID MECHANICS 310 30 70 100 4C

    TH3 ME 213 INSTRUMENTATI/N ANDC/NTR/L ENGINEERING

    310 30 70 100 4C

    TH4 ME 214 6INEMATICS /5MACHINES

    310 30 70 100 4C

    TH ME 21 $RINCI$LE /5MANU5ACTURINGSYSTEMS

    310 30 70 100 4A

    TH. ME 21. $R/DUCTI/N AND/$ERATI/NSMANAGEMENT I

    300 30 70 100 3A

    $R1 ME 217 THERMAL ENGINEERING

    - II 5LUID MECHANICSLA

    002 30 70 100 2C

    $R2 ME 21 INSTRUMENTATI/N ANDC/NTR/L ENGG8 6INEMATICS /5MACHINES LA

    002 30 70 100 2C

    $R3 ME 21 MACHINE SH/$ LA 002 30 70 100 2A

    !S2 ME 220 SEL5 STUDY 001 30 70 100 1C

    TOTAL 30hrs 1000 30

    11

  • 8/14/2019 Mechanical Engineering DTU

    12/74

    SUGGESTED SCHEME FOR B.Tech. FIFTH SEMESTER (MECHANICAL ENGINEERING)

    .No.

    CourseNo.

    Subject LT E!"#u"t$o% Tot"#M"r&

    s

    Cre'$t

    TeSessional End

    TH1 ME 301 I C ENGINES 310 30 70 100 4C

    TH2 ME 302 5LUID SYSTEMS 310 30 70 100 4C

    TH3 ME 303 DYNAMICS /5MACHINES

    310 30 70 100 4C

    TH4 ME 304 MECHANICS /5S/LIDS

    310 30 70 100 4C

    H ME 30 MANU5ACTURINGTECHNIUES I

    310 30 70 100 4A

    $R1 ME 30. I C ENGINES 5LUIDSYSTEMS LA

    002 30 70 100 2C

    $R2 ME 307 DYNAMICS /5MACHINES

    002 30 70 100 2C

    $R3 ME 30 MECHANICS /5S/LIDS LA

    002 30 70 100 2C

    $R4 ME 30 MANU5ACTURINGTECHNIUES I LA

    002 30 70 100 2C

    $R ME 310 MIN/R $R/9ECT-I 002 30 70 100 2CInd:s'%ial T%ainin; "D:%a'ions 4

  • 8/14/2019 Mechanical Engineering DTU

    13/74

  • 8/14/2019 Mechanical Engineering DTU

    14/74

    SUGGESTED SCHEME FOR B.Tech. SE+ENTH SEMESTER (MECHANICAL ENGINEERING)

    .No.

    CourseNo.

    Subject LT E!"#u"t$o%Sessional End

    Tot"#M"r&

    s

    Cre'$t

    TeTH1 ME 401 MECHATR/NICS 310 30 70 100 4A

    TH2 ME 402 CAD-CAM 310 30 70 100 4C

    TH3 ME 403 MACHINE DESIGN II 300 30 70 100 3C

    TH4 #ME47B ELECTI!E I 310 30 70 100 4C

    TH ME 40 /$EN ELECTI!E I 310 30 70 100 4A

    $R1 ME40. MECHATR/NICSLACAD-CAM LA

    002 30 70 100 2C

    $R2 ME 407 MACHINE DESIGN - II LA 003 30 70 100 3C

    $R3 ME 40 ELECTI!E I LA 002 30 70 100 2C

    $R4 ME 40 MA9/R $R/9ECT "$ART-I,

    002 30 70 100 2C

    $R ME 410 !I!A !/ICE EAM /5 !I SEMESTERINDUSTRIAL TRAINING

    002 30 70 100 2C

    TOTAL 30hrs 1000 30

    ,* - TO / 0 1 2T00 D

    SUGGESTED SCHEME FOR B.Tech. EIGHTH SEMESTER (MECHANICALENGINEERING)

    S.No.

    CourseNo.

    Subject LT E!"#u"t$o%Sessional End

    Tot"#M"r&

    s

    Cre'$tTe

    TH1 ME 411 MANU5ACTURINGTECHNIUES II

    310 30 70 100 4A

    TH2 ME#4B ELECTI!E- II 310 30 70 100 4C

    TH3 ME 413 /$EN ELECTI!E II 310 30 70 100 4A

    $R1 ME 414 MANU5ACTURINGTECHNIUES - II LA

    003 30 70 100 3A

    $R2 ME 41 ELECTI!E- II LA 003 30 70 100 3C

    $R3 ME 41. SEMINAR RE$/RT 002 30 70 100 2C

    $R4 ME 417 MA9/R $R/9ECT"$ART-II,

    0010 30 70 400 10C

    TOTAL 30 hrs 1000 30

    ,* - TO / 0 1 2T00 D

    GRAND T/TAL MAR6S 000

    1=

  • 8/14/2019 Mechanical Engineering DTU

    15/74

    CREDITS 240

    EECTI/E S012ECTST8E?"'> 4?6# E>ECT$EECT$E6T$2

    =T E'?E2E?43

    =AT$2I'4E%

    ==D

  • 8/14/2019 Mechanical Engineering DTU

    16/74

  • 8/14/2019 Mechanical Engineering DTU

    17/74

    38 Thermodnami!s&( 6enne'+ a%= M*;%ae%( %e-*%(s'allia'ion and ;%ain ;%oe% %:le solidi?i*a'ion o? @e'al and allo(s solid sol:'ione:'e*'i* e:'e*'oid and in'e%-@e'alli* *o@o:nds I%on *a%&on eF:ili&%i:@ dia;%a@ TTT-dia;%[email protected] TreatmentJ $%in*iles and :%ose o? +ea' '%ea'@en' o? lain *a%&on s'eels annealin;no%@aliin; +a%denin; 'e@e%in; iso'+e%@al '%ea'@en' *ase +a%denin; *a%&:%iin; ni'%idin; e'*%e*ii'a'in; +a%denin; o? al:@in:@ allo(s8UNIT I#aterialsJ $lain Ca%&on s'eels e??e*' o? allo(in; ele@en's %oe%'ies and :ses +ea' '%ea'@en'o? 'ool s'eels s'ainless s%in; and ani* *ell %:s'in; o? I%on Me'+ods o? %o'e*'ion ?%o@ *o%%osion8

    UNIT #Fi%er Rein'or!ed Com-ositesJ Gene%al *+a%a*'e%is'i*s Ali*a'ions In'%od:*'ion 'o 5i&e%s ;lass*a%&on 6e>la% 4 ?i&e%s8 Ma'%i $ol(@e%i* Me'alli* Ce%a@i* Ma'%i Co:lin; a;en's and ?ille%s8

    1

    http://www.mcgraw-hill.com/http://www.mcgraw-hill.com/http://www.amazon.co.uk/s/ref=rdr_ext_aut?_encoding=UTF8&index=books&field-author=T.D.%20Eastophttp://www.mcgraw-hill.com/http://www.mcgraw-hill.com/http://www.amazon.co.uk/s/ref=rdr_ext_aut?_encoding=UTF8&index=books&field-author=T.D.%20Eastop
  • 8/14/2019 Mechanical Engineering DTU

    18/74

    In'%od:*'ion 'o '+e %a*'i*e and dis*iline o? Nano- S*ien*e Nano s*ale di@ension Nanos*ien*e and en;inee%in; %in*iles Nano @a'e%ials *a%&on nano-':&e 'e*+nolo;( andind:s'%ial ali*a'ions8

    UNIT #I,E'%a*'ion o? @e'als ?%o@ s:l+ide o%es and *on*en'%a'es :sin; &io-+(d%o @e'all:%;i*al %o*esses8

    T+e &iolo;i*al and *+e@i*al %in*iles o? &iolea*+in;&io-oida'ion %o*esses8 a*'e%ia :sed in '+ese%o*esses and '+ei% *+a%a*'e%is'i*s &a*'e%ial lea*+in; @e*+anis@ '+e a%a@e'e%s a??e*'in;&iolea*+in;&io-oida'ion %o*esses and %o*ess desi;n8

    Su&&ested "ooksJ

    Tet "ooks:

    1, Ma'e%ial S*ien*e ) En;inee%in;!,Ra;+a>an $%en'i*e Hall India L'd8 200182, Ma'e%ial S*ien*e and En;inee%in; an In'%od:*'ion illia@ D8 Callis'e% 9%

    9o+n

  • 8/14/2019 Mechanical Engineering DTU

    19/74

    5ini'e and >a%io:s di??e%en*e oe%a'o%s In'e%ola'ion ?o%@:lae "Nee%e''s,8

    UNIT I#4Inter-olation and Cur7e 'ittin& and Numeri!al /i''erentiation 6La;%an;es in'e%ola'ion ?o%@:la8 In'e%ola'ion an*e En;inee%in; Ma'+e@a'i*s !ol 2 H8C8 Tanea I868 In'e%na'ional

    E-204 QUANTITATIE TECHNIQUESL T P Credits

    3 1 0 3Unit I: Introdu!tion to statisti!s

    Na':%e and %ole o? s'a'is'i*s in @ana;e@en' Meas:%es o? *en'%al 'enden*( and dise%sion 6:%'osis8

    Unit II: Introdu!tion to -ro%a%ilit theor

    $%o&a&ili'( '+eo%( oin'l( dis'%i&:'ed %ando@ >a%ia&les dis'%i&:'ions - *on'in:o:s and dis*%e'e

    Sa@lin; dis'%i&:'ions8

    Unit III: .-othesis Testin&

    Es'i@a'ion and +(o'+esis 'es'in; $a%a@e'%i* 'es's '-'es' AN/!A Non-a%a@e'%i* 'es's C+i-sF:a%e

    'es' Co%%ela'ion and %e;%ession anal(sis lo;is'i* %e;%ession anal(sis Ali*a'ions o? s'a'is'i*a

    a*=a;es8

    Unit I#: Linear 8ro&rammin&

    $%o&le@- ?o%@:la'ion and ali*a'ions sol:'ion '+%o:;+ ;%a+i*al @e'+od and Si@le @e'+ods

    in'%od:*'ion 'o non-linea% %o;%a@@in;8

    1

  • 8/14/2019 Mechanical Engineering DTU

    20/74

    Unit #:Trans-ortation odels

    T%anso%'a'ion and '%anss+i@en' %o&le@s assi;n@en' and seF:en*es @odels8

    Unit #I: /e!ision Theor

    De*ision T%ee Ga@e T+eo%(-Mini@a and Mai@in Do@inan*e $%in*ile and :se o? /R so?'alen' S(s'e@ o? 5o%*es8 Mo@en'o? a ?o%*eJ !a%i;nons T+eo%e@8 Co:leJ EF:i>alen' Co:lesEF:ili&%i:@ o? Ri;id odiesJ 5%ee od( Dia;%a@ Condi'ions o? Ri;id odies8"Sol:'ion o? '+e %o&le@s &( !e*'o% @e'+od also8,5i%s' Mo@en' "*en'%e o? ;%a>i'(, ) Se*ond Mo@en'"@o@en' o? ine%'ia,o? C:%>ilinea% $lane and Solid odies8

    UNIT IIT%:ssJ T(es Sol:'ion o? Si@le lane '%:sses &( anal('i*al and ;%a+i*al @e'+ods8 S+ea% 5o%*esand endin; Mo@en's in Di??e%en' ea@s8

    UNIT III5%i*'ionJ Lae%si&ili'( o? @a*+ines8

    /nami!s:

    UNIT I#:9inemati!s o? a a%'i*le >elo*i'( and a**ele%a'ion o? a a%'i*le in a'+ *oo%dina'es %e*'an;:la%*(lind%i*al and s+e%i*al *oo%dina'es !e*'o% de%i>a'i>es in %o'a'in; s(s'e@s8

    UNIT #:

    D(na@i*s o? o? a a%'i*le Linea% @o@en':@ An;:la% @o@en':@ Ene%;( @e'+ods D(na@i*s o?s(s'e@ o? a%'i*les o%&i'al @o'ion =ine@a'i*s o? a %i;id &od( C+asles '+eo%e@

  • 8/14/2019 Mechanical Engineering DTU

    21/74

    UNIT #I: Ine%'ia 'enso% $%in*ial aes D(na@i*s o? a %i;id &od( E:le%s eF:a'ions DAle@&e%'s%in*ile $%in*ile o? >i%':al e%>ie< o? S+o%' and Lon; %:n *os' *:%>es ?ied *os'>a%ia&le *os' a>e%a;e *os' @a%;inal *os' /o%':ni'( *os' %ea=-E>en-Anal(sis8

    Unit III: Time #alue o' one$%esen' alen' @e'+od"Re>en:e do@ina'ed *as+ ?lo< dia;%a@ *os' do@ina'ed *as+ ?lo< dia;%a@, %a'e o? %e':%n @e'+odEa@les in all '+e @e'+ods8

    Unit #: /e-re!iation and TaesDe%e*ia'ion- In'%od:*'ion Classi*al Me'+odsJ S'%ai;+' line @e'+od o? de%e*ia'ion de*linin; &alan*e@e'+od o? de%e*ia'ion-S:@ o? '+e (ea%s di;i's @e'+od o? de%e*ia'ion sin=in; ?:nd @e'+od o?de%e*ia'ion Ann:i'( @e'+od o? de%e*ia'ion Modi?ied a**ele%a'ed *os' %e*o>e%( s(s'e@ Ta*on*e's and a?'e% 'a e*ono@i* *o@a%ison8

    1

  • 8/14/2019 Mechanical Engineering DTU

    22/74

    Unit #I: "ook 9ee-in&$%in*iles o? do:&le en'%( s(s'e@J &an= %e*on*ilia'ion s'a'e@en' sin;le en'%( s(s'e@J oin' >en':%eand *onsi;n@en' a**o:n'8

    Su&&ested Readin&s:

    18 En;inee%in; E*ono@( S:lli>an i*=s and 6oellin; $ea%son In'e%na'ional

    28 Ma*%oe*ono@i*sJ Unde%s'andin; '+e eal'+ o? Na'ions &( Da>id Miles and And%e< S*o'' ile(

    8RACTICALS

    E20>THERMALENGINEERING -1ENGINEERING MECHANICS$RACTICAL

    L T 8 Credits 0 0 2 2C

    -E-eriments %ased on the theor slla%us o' the su%?e!t E201@E20,

    Case analsis: Sstem identi'i!ation+ Anal$in& it Bith the -rin!i-les o'e!hani!s 4Bith !ontent o' the slla%us6,

    Case Stud: o' the Sim-le e!hani!al sstems+ %ased on the -rin!i-le o'e!hani!s 4Bith !ontent o' the slla%us,

    E 20 AC.INE /RA)IN< $RACTICAL

    L T 8 Credits0 0 2 2C

    En;inee%in; D%aiea%io:s @odelsJD%a

  • 8/14/2019 Mechanical Engineering DTU

    23/74

    In'%od:*'ion 'o AUT/ CAD $%a*'i*e o? asse@&l( d%a

  • 8/14/2019 Mechanical Engineering DTU

    24/74

    UNIT IRe!i-ro!atin& Air Com-ressor:S'ead( ?lo< anal(sis iso'+e%@al adia&a'i* and ol('%oi* *o@%ession sin;le and @:l'i-s'a;e*o@%ession ideal in'e%@edia'e %ess:%e *o@%esso% *lea%an*e >ol:@e'%i* and iso'+e%@ae??i*ien*( @ini@:@ a**:@ :@8

    UNIT III

  • 8/14/2019 Mechanical Engineering DTU

    25/74

    E- 212 "LUID ECHANICS L T P Credits

    3 1 0 4CUNIT IIntrodu!tion: 5l:id and ?lo< de?ini'ion and '(es *on'in::@ ?l:id %oe%'ies8

    Fluid Stati!s: $%ess:%e >a%ia'ion in a s'a'i* ?l:id +(d%os'a'i* @ano@e'%( ?o%*es on lanes and*:%>ed s:%?a*es s'a&ili'( o? s:&@e%;ed and ?loa'in; &odies8

    UNIT IIFluid kinemati!sJ Gene%al des*%i'ion o? ?l:id @o'ion s'ead( ?lool:@e Re(nolds '%anso%' '+eo%e@ E:le%s

    eF:a'ion e%no:liis eF:a'ion Na>ie% s'o=es eF:a'ion 5lo< @eas:%e@en'- !en':%i@e'e% /%?i*e@e'e% $i'o'- ':&e ?lo< @e'e%s no'*+es8

    /imensional analsis: :*=in;+a@s - T+eo%e@8 Non-di@ensional a%a@e'e%s si@ila%i'( and i'sali*a'ion 'o ?l:id %o&le@s8UNIT I##is!ous 'loB: La@ina% ?lo< &e'

  • 8/14/2019 Mechanical Engineering DTU

    26/74

    E213 #INSTRU ENTATI$N AND C$NTR$L ENGINEERING

    L T P Credits 3 1 0 4C

    UNIT I$+(si*al F:an'i'ies and '+ei% @eas:%e@en's Di??e%en' ;%ades o? @eas:%a&ili'( s*ales and s*ale-in>a%ian' %oe%'ies E%%o%s %e*ision"%esol:'ion, a**:%a*( and *ali&%a'ion s'anda%ds T%ansd:*e%s o?di??e%en' '(es and '+ei% :sa;e8 asi* *+a%a*'e%is'i*s and Resonse o? @eas:%in; ins'%:@en's :ndes'a'i* and d(na@i* *ondi'ions

    UNIT II In'e%@edia'e o% si;nal *ondi'ionin; de>i*es li=e a@li?ie%s in'e;%a'in; and di??e%en'ia'in; *i%*:i'sDisla( de>i*es li=e >ol'@e'e%s CR/ !T!M and %e*o%de%s8UNIT IIIMeas:%e@en' o? disla*e@en's s'%ains >elo*i'( a**ele%a'ion 'e@e%a':%e %ess:%e and ?l:id ?lo

  • 8/14/2019 Mechanical Engineering DTU

    27/74

    Mi*%o-*o@:'e% *on'%ol s(s'e@s DAAD *on>e%'e%s8 Co@:'e% da'a a*F:isi'ion and *on'%ol $:lse@eas:%e@en's and *o@@and $:lse o:':'s and s'ee% @o'o% Mi*%o-*o@:'e% %ealia'ion o? aliF:id le>el?lo< *on'%ol s(s'e@8

    8

    SU

  • 8/14/2019 Mechanical Engineering DTU

    28/74

    3 1 0 4AUNIT I

    Introdu!tion to a!hine Tools:Classi?i*a'ion si@ila%i'ies >a%io:s *:''in; 'ools and *:''in; ?l:idsseed o? *:''in; ?eed %a'e @a*+inin; %a'e and @a*+inin; 'i@e8

    UNIT II

    LatheJ Cons'%:*'ion i@o%'an' @e*+anis@s >i 8 a%on 'ail s'o*= +ead- s'o*= ?eed &o

    se*i?i*a'ion oe%a'ions e8;8 'ae% ':%nin; e**en'%i* ':%nin; s*%e< *:''in;8UNIT II/rillin& ma!hineJ Cons'%:*'ion ?eed @e*+anis@J Se*i?i*a'ion ;eo@e'%( and no@en*la':%e o? 'a%io:s oe%a'ionsJ Sla& @illin; an;le *:''in; slo' @illin; ?l( @illin; sli' ;ea%@illin; s:% and &e>el T- slo' @illin; na':%e o? oe%a'ions : and doelo@en' %o*esses %od:*' li?e *(*le $%o*ess ?lo< *+a%' T(es o%o*esses $%o*ess e%?o%@an*e Lea%nin; *:%>e8

    A

  • 8/14/2019 Mechanical Engineering DTU

    29/74

    UNIT III: Fa!ilit lo!ation and Laout5a*'o%s a??e*'in; '+e lo*a'ion de*isions @e'+ods o? ?a*ili'( lo*a'ion- ?a*'o% %a'in; s(s'e@s *en'%oid@e'+od and %o?i' >ol:@e anal(sis T(es o? la(o:' lo*= dia;%a@ and Asse@&l( Line alan*in;8

    UNIT I#: /emand Fore!astin&:ali'a'i>e and F:an'i'a'i>e ?o%e*as'in; Ti@e se%ies and %e;%ession @odels Meas:%es o? ?o%e*as'in;e%%o%s8

    UNIT #: In7entor modelI@o%'an*e o? in>en'o%( :nde%s'o*=in; and o>e%s'o*=in; 5ied o%de% F:an'i'( @odels and ?ied 'i@ee%iod @odels "E/ @odels, Sele*'i>e in>en'o%( @ana;e@en'- AC !ED and 5SN anal(sis 9IT@an:?a*':%in; s(s'e@ To(o'a %od:*'ion s(s'e@s- 6ANAN @odel and eli@ina'ion o?

  • 8/14/2019 Mechanical Engineering DTU

    30/74

    8RACTICALL T 8 Credits0 0 2 2A

    "ased on Course Bork !orres-ondin& to 8rin!i-le o' manu'a!turin& sstems E 21

    E220SELF STU/=L T 8 Credits

    4#S26

    0 0 1 1C"ased on Course )ork Su&&ested % the Tea!her E 210

    E-301 I&C& ENGINESL T P Credit

    s 3 1 0 4C

    UNIT IIntrodu!tion to I,C En&inesJClassi?i*a'ion 'e and o%''i@in; dia;%a@

    UNIT II

    Com%ustion 8henomenon in SI en&ines:$%in*iles o? *o@&:s'ion in SI en;inee??e*' o? en;ines and oe%a'in; >a%ia&les on i;ni'ion dela( )?la@e %oa;a'ion *o@&:s'ion *+a@&e% ?o% SI en;ines *(*le 'o *(*le >a%ia'ion %e-i;ni'iona&no%@al *o@&:s'ion '+eo%( o? de'ona'ion e??e*' o? en;ine and oe%a'in; >a%ia&les on de'ona'ions:%?a*e i;ni'ion adia&a'i* ?la@e 'e@e%a':%e i;ni'ion s(s'e@s

    UNIT IIICom%ustion -henomenon in CI en&ines:$%in*iles o? *o@&:s'ion in CI en;ine dela( e%iod >a%ia&les a??e*'in; dela( e%iod diesel =no*=@e'+ods o? *on'%ollin; diesel =no*= *o@&:s'ion %o*ess ) *o@&:s'ion *+a@&e%s ?o% CI en;ines

    UNIT I#Fuel sstem and iture re5uirement in SI and CI En&ine:Ca%&:%e'ion- a%ia'ion *o@ensa'in;de>i*es >en':%e and e' di@ension *al*:la'ion @ode%n ?:el ind:*'ion s(s'e@ @:l'i oin' ?:el ine*'ions(s'e@ ?:el ine*'ionJ *o@@on %ail di%e*' ine*'ion

    UNIT #En&ine Testin&+ Su-er!har&in&+ Lu%ri!ation and En&ine Coolin&:

    ;

  • 8/14/2019 Mechanical Engineering DTU

    31/74

    En;ine e%?o%@an*e and 'es'in; @eas:%e@en' o? oes *oolin; s(s'e@ ai% *oolin; e?:els L$G CNG %od:*e% ;as &io;as H2 &iodiesel and al*o+ols

    Su&&ested Readin&s:

    18 I,C En&ines and Air 8ollution&( E858/&e%' In'e' Ed:*a'ional $:&lis+e%s8. I,C En&ines&( 5e%;:son 9o+nile( ) Sons8;. Fundamentals o' I,C En&ines&( 98 He(in; s(s'e@s o? >anes e' %o:lsion8UNIT IIATER TURINESJ Classi?i*a'ion $el'on 5%an*is %oelle% and 6alan ':%&ines !elo*i'( '%ian;lese??i*ien*( d%a?' ':&es ;o>e%nin;8UNIT III$:@sJ Cen'%i?:;al :@s >elo*i'( '%ian;les e??i*ien*( ':%&ine :@s aial and @ied ?lo< :@sosi'i>e disla*e@en' :@s %e*i%o*a'in; ;ea% and e :@s8

    $e%?o%@an*e o? 5l:id Ma*+inesJ Si@ila%i'( la

  • 8/14/2019 Mechanical Engineering DTU

    32/74

    Ta'a M*G%aen CS :&lis+e%s and dis'%i&:'e%s 28T+eo%( o?Ma*+ines Ra''an8S8SM*G%a

  • 8/14/2019 Mechanical Engineering DTU

    33/74

  • 8/14/2019 Mechanical Engineering DTU

    34/74

    Columns and strutsJ Col:@ns o? di??e%en' end *ondi'ions and ?ail:%e o? *ol:@ns E:le%Ps ?o%@:lasRan=ine-Go%donPs ?o%@:la 9o+nsonPs e@i%i*al ?o%@:la ?o% aiall( loaded *ol:@ns and '+ei%ali*a'ions8

    UNIT #IClinders and s-heresJT+in C(linde%s and s+e%es De%i>a'ion o? ?o%@:lae and *al*:la'ion o? +oo s'%ess lon;i':dinal s'%essin a '+in *(linde% and s+e%e s:&e*'ed 'o in'e%nal %ess:%e8

    T+i*= *(linde%sJ Hoo %adial and lon;i':dinal s'%esses in '+i*= *(linde%s d:e 'o in'e%nal and e'e%na%ess:%e Co@o:nd *(linde%s S'%esses in s+%in= ?i's8Ro'a'in; dis* o? :ni?o%@ '+i*=ness dis* o? >a%ia&le '+i*=ness Ro'a'in; s+a?' and *(linde%s8

    Su&&ested Readin&s:18 QEn;;8 Me*+ani*s o? solidsQ $oo> E;e% $8 $%en'i*e Hall Ne< Del+i 128 QS'%en;'+ o? Ma'e%ialsQS%iNa'+ L8S8 e'8al8 M*Millan Ne< Del+i200138 QS'%en;'+ o? Ma'e%ialsQSad+: Sin;+ 6+anna $:&lis+e%s Ne< Del+i 20008

    48 QEle@en's o? S'%en;'+ o? Ma'e%ialsQTi@os+en=o S8$8 Eas'-es' a??ilia'ed Ne< Del+i 2000888 QMe*+ani*s o? Ma'e%ialsQ Hi&&le% R8C $%en'i*e Hall Ne< Del+i 14878 QMe*+ani*s o? SolidsQ 5enne% Ro;e%8T U868 8C8 $:&li*a'ion Ne< Del+i 1088Me*+ani*s o? @a'e%ials &( 9a@es M8 Ge%e8

    E30 ANUFACTURIN< TEC.NOLOio:% o? @e'als in elas'i* and las'i* de?o%@a'ion s'%ess-s'%ain%ela'ions+is Yield *%i'e%ia Con*e' o? ?lo< s'%ess &( '%:e s'%ess-s'%ain *:%>esUNIT #Ho' 5o%@in; and Cold 5o%@in; Anal(sis o? i@o%'an' @e'al ?o%@in; %o*esses li=e 5o%;in; Rollin;E'%:sion i%e D%a

  • 8/14/2019 Mechanical Engineering DTU

    35/74

    UNIT #I8oBder etallur&: $oan'a;es Ali*a'ions andLi@i'a'ions o? o

  • 8/14/2019 Mechanical Engineering DTU

    36/74

    L T 8 Credits 0 0 2 2C

    Industrial Trainin& 4/uration 'our Beeks in Binter 7a!ationat the end o' #thsemester6

    E- 311 TRANSP$RT PHEN$ EN$NL T 8 Credits3 1 0 C

    UNIT IIntrodu!tion and Condu!tion:!a%io:s @odes o? +ea' '%ans?e% 5o:%ie%Ps Nei'( and o>e%all +ea' '%ans?e% *oe??i*ien' '+e%@al *ond:*'i>i'( o? solidsliF:ids and ;ases ?a*'o%s in?l:en*in; *ond:*'i>i'( @eas:%e@en' ;ene%al di??e%en'ial eF:a'ion o?

    *ond:*'ion one di@ensional s'ead( s'a'e *ond:*'ion linea% +ea' ?lo< '+%o:;+ a lane and *o@osi'e

  • 8/14/2019 Mechanical Engineering DTU

    37/74

    Di??e%en' '(es o? +ea' e*+an;e%s desi;n o? +ea' e*+an;e%s LMTD and NTU @e'+ods ?o:lin;?a*'o% and *o%%e*'ion ?a*'o% In'%od:*'ion 'o *o@a*' and la'e +ea' e*+an;e%s8

    UNIT #Iass Trans'erMass and @ole *on*en'%a'ions @ole*:la% di??:sion 5i*=Ps laao%a'in; ?l:id s:%?a*es in'%od:*'ion 'o @ass '%ans?e% in la@ina% and ':%&:len' *on>e*'iondi@ensional less a%a@e'e%s in *on>e*'i>e @ass '%ans?e% *o@&ined +ea' and @ass '%ans?e%

    Su&&ested Readin&s:

    18 Fundamentals o' En&ineerin& .eat and ass Trans'er &( R8C8Sa*+de>a Ne< A;eIn'e%na'ional $:&lis+e%s8

    28 Fundamentals o' .eat and ass Trans'er&( $ 5%an=8 In*%oe%a and Da>id $8 Dei'' 9o+nile( and Sons8

    38 .eat Trans'er&( A8 ean 9o+n ile( and Sons848 .eat Trans'er&( M8N8 /isi= M*G%a< Hill oo= Co88 .eat Trans'er A 8ra!ti!al A--roa!h&( A8Cene;elY:n:s Ta'a M*G%a< Hill8.8 En&ineerin& .eat and ass Trans'er&( Ma+es+ M8 Ra'+o%e La@i $:&li*a'ions8

    78 .eat and ass Trans'er&( 98$ Hol@an Ta'a M*G%a< Hill8A. Fundamentals o' omentum+ .eat and ass Trans'er &((ames R,)elt (ohn )ile *

    Sons 487t6, Ltd,

    E 312 REFRIao:% *o@%ession %e?%i;e%a'ion*(*le - C/$ Re%esen'a'ion o? *(*le on T-S and -+ *+a%'s - e??e*'s o? s:& *oolin; and s:e% +ea'in;- *(*le anal(sis - A*':al *(*le In?l:en*e o? >a%io:s a%a@e'e%s on s(s'e@ e%?o%@an*e ne*essi'( o?@:l'is'a;in; @:l'is'a;e *o@%ession s(s'e@ and '+ei% anal(sis ne*essi'( and

  • 8/14/2019 Mechanical Engineering DTU

    38/74

  • 8/14/2019 Mechanical Engineering DTU

    39/74

    UNIT I#JDesi;n o? @e*+ani*al ele@en's in*l:din; solid @odelin; and ?ini'e ele@en' anal(sis o? @a*+ine*o@onen's :sin; a>aila&le so?'e%ia'ion :l>e%ied ?:el ?i%in; s(s'e@ *o@&:s'ion %o*ess need o?e*ess ai% *(*lone ?:%na*e ?l:idied &ed &oile% la*e@en' o? e>ao%a'o% e*ono@ie%s s:e%+ea'e%s %e-+ea'e%s ai% %e-+ea'e% in '+e &oile% de-ae%a'ion &oile% &lo

  • 8/14/2019 Mechanical Engineering DTU

    40/74

    ina%( >ao:% *(*les *o:led *(*les ;as ':%&ine- s'ea@ ':%&ine o

  • 8/14/2019 Mechanical Engineering DTU

    41/74

    $%od:*'ion s(s'e@s and '+ei% *lassi?i*a'ions $%od:*'i>i'( >a%ia&les and @eas:%e@en' $%od:*'i>i'(-To'al and a%'ial %od:*'i>i'( Reasons and %e@ed( ?o% oo% %od:*'i>i'(8

    Unit II: )ork Studo%= S(s'e@ Desi;nJ Ta(lo%s s*ien'i?i* @ana;e@en' Gil&%e'+s *on'%i&:'ions @e'+od s':d( @i*%o-@o'ion s':d( %in*iles o? @o'ion e*ono@( a%ia&le da'a8 A**e'an*e Sa@lin;- Sin;le and do:&le sa@lin; si si;@a IS/000 ) IS/ 140008

    Unit #: Resour!e 8lannin&En'e%%ise %eso:%*e lannin; "ER$, @a'e%ial %eF:i%ed lannin; "MR$, @an:?a*':%in; %eso:%*elannin; "MR$ II, a;;%e;a'e lannin;8Unit #I: Relia%ilit and aintenan!eRelia&ili'( a>aila&ili'( and @ain'aina&ili'( dis'%i&:'ion o? ?ail:%e and %eai% 'i@es de'e%@ina'ion o?MT5 and MTTR %elia&ili'( @odels s(s'e@ %elia&ili'( de'e%@ina'ion Main'enan*e @ana;e@en' andi's o&e*'i>es !a%io:s '(es o? Main'enan*e $lannin; Ho:se 6eein; S *on*e's8

    TEHT "OO918 In'%od:*'ion 'o i S+an=e% Gal;o'ia $:&li*a'ion Del+i

    E 31; .EAT AN/ ASS TRANFER@REFRI

  • 8/14/2019 Mechanical Engineering DTU

    42/74

    "ased on the Course Bork !orres-ondin& to .EAT AN/ ASS TRANSFER LA" E 311@REFRI

  • 8/14/2019 Mechanical Engineering DTU

    43/74

    L T 8 Credits 3 1 0 A

    UNIT IIn'%od:*'ion 'o @e*+a'%oni* s(s'e@s and *o@onen's Senso%s and '%ansd:*e%s

    UNIT II

    A*':a'o%s- ele*'%i*al ele*'%o@e*+ani*al ele*'%o@a;ne'i* +(d%a:li* ne:@a'i*s@a%' @a'e%ial a*':a'o%s @i*%o a*':a'o%s nano a*':a'o%s8 A*'i>e a*':a'o%s- ieoele*'%i* s+ae@e@o%( allo(s"SMA, ele*'%o a*'i>e ol(@e%s"EA$, @a;ne'o %es'%i*'i>e @a;ne'o %+eolo;i*al?l:id"MR,8 S'ee% and se%>o @o'o%s En*ode%s and %esol>e%s8

    UNIT IIIModelin; anal(sis and si@:la'ion o? d(na@i* s(s'e@s :se o? MATLA ode N(F:is' and %oo'-lo*:slo'

    UNIT I#5eed&a*= s(s'e@sJ /en and *losed loo *on'%ol s(s'e@s S'a&ili'( and sensi'i>i'( $ID +ase la;

    and +ase lead *o@ensa'ion

    UNIT #Sa@led da'a s(s'e@s and Di;i'al *on'%olle%s DAAD *on>e%'e%s @i*%o%o*esso%s in'e%?a*in;

  • 8/14/2019 Mechanical Engineering DTU

    44/74

    3 1 0 C

    UNIT IIntrodu!tionJIn'%od:*'ion 'o CAD8 Ele@en's and essen'ial %eF:i%e@en's o? CAD8+a%d

  • 8/14/2019 Mechanical Engineering DTU

    45/74

    1. $%in*iles o? Co@:'e% Aided Desi;n and Man:?a*':%in; 5a%id A@i%o:*+e $ea%son82. CADCAM T+eo%( and $%a*'i*e &( I&%a+i@ Oeid83. CADCAM $%in*iles and Ali*a'ions &( $8N8 Rao Ta'a M*G%a< Hill $:&lis+in; Co@an(

    L'd8

    Re?e%en*e oo=sJ

    18 CADCAM Co@:'e% Aided Desi;n and Man:?a*':%in; &( Mi=ell $8 G%oo>e% and E@o%(

    Oi@@e% 9%828 Co@:'e% In'e;%a'ed Desi;n and Man:?a*':%in; &( Da>id D8 edesJ 5la' &el's ! el's Rolle% *+ains8

    UNIT I#Desi;n o? Gea%sJ Heli*al e>el and o%@ ;ea%s desi;n s'%esses s'%ess *on*en'%a'ion o>e%load?a*'o%s >elo*i'( ?a*'o%s &endin; s'%en;'+ o? ;ea% 'oo'+ :*=in;+a@ eF:a'ion ?o% d(na@i* loads anded &ea@s C%ane +oo=s Sna'*+ &lo*= asse@&l( ele@en's8

    UNIT #I:Desi;n o? En;ine a%'sJ Conne*'in; %od *%an= s+a?' is'on

    Su&&ested readin&s:

    18 Me*+ani*al En;inee%in; Desi;n S+i;le( 98 E8 Mis*+=e C8 R8 and :d(nasR8 G8 M*G%a< Hill 7'+ Edi'ion 20048 In'e%na'ional8285:nda@en'al o? Ma*+ine Co@onen' Desi;n9:>inall R8 C8 and Ma%s+e=

    =@

  • 8/14/2019 Mechanical Engineering DTU

    46/74

    68 M8 9o+n ile( and Sons 2000838 5:nda@en'als o? Ma*+ine Ele@en'sHa@%o*= 8 98 9a*o&son 8 S*+@id'S8 R88 M*G%a< Hill 1848Ma*+ine Desi;nJ An In'e;%a'ed A%oa*+ No%'on R8 L8 $ea%sonEd:*a'ion Indian Re%in'-200188 Ma*+ine Desi;n +anda%i TMH.8 Ma*+ine Desi;n D8 68 A;;a%

  • 8/14/2019 Mechanical Engineering DTU

    47/74

    E0 A(OR 8RO(ECT 48ARTI6 L T 8 Credits

    0 0 2 2C

    E10 #I#A #OICE EHA OF #IthSEESTER IN/USTRIAL TRAINI A(OR 8RO(ECT 48ARTII6

    L T 8 Credits0 0 10 10C

    =A

  • 8/14/2019 Mechanical Engineering DTU

    49/74

    T.ERAL 1TNON CON#ENTIONAL ENERin; s:%?a*e lo*a'ion and o%ien'a'ion8 Hea' '%ans?e% *onside%a'ions %ele>an' 'o sola%ene%;(8 C+a%a*'e%is'i*s o? @a'e%ials and s:%?a*es :sed in sola% ene%;( a&so%'ion8

    UNIT IIIDe>i*es ?o% '+e%@al *olle*'ion and s'o%a;e8Desi;n *onside%a'ion and e%?o%@an*e o? di??e%en' '(es o?sola% *ells8 5la' la'e ?o*:sin; *olle*'o%s8 Ene%;( s'o%a;e de>i*es s:*+ as en'ional ene%;( So:%*es 6+anna $:&lis+e%s828 S8$8 S:=+a'@e K Sola% Ene%;( Ta'a-M*;%a< +ill Ne< Del+i838 KSola% Ene%;( '+e%@al %o*ess 9A D:??ie and 8A8 e*=@an 9o+n

  • 8/14/2019 Mechanical Engineering DTU

    50/74

  • 8/14/2019 Mechanical Engineering DTU

    51/74

    >3 Tis:alia'ion8

    Unit #

    Ai%*%a?' %o:lsion '+eo%( Ra@e' en;ine $:lsee' en;ine Ro*=e' %o:lsion and i's '+eo%(

    Unit #ILiF:id %oellan' solid %oellan' %o*=e' ali*a'ions sa*e ?li;+'s8

    Su&&ested readin&s:

    18 S8M8 Ya+(a Q 5:nda@en'als o? Co@%essi&le 5lo< Q Ne< A;e In'e%na'ional "$,

    Li@i'ed Ne< Del+i 1.828 $8Hill and C8 $e'e%son Q Me*+ani*s and T+e%@od(na@i*s o? $%o:lsion Q Addison -esle( $:&lis+in; Co@an( 12838 N898 O:*%oana@:''oo Q Gas T:%&ine T+eo%( Q Lon;@an G%o: L'd8 108.8 G8$8S:''on Q Ro*=e' $%o:lsion Ele@en's Q 9o+n ile( 1. Ne< Yo%=878 A8H8S+ai%o Q D(na@i*s and T+e%@od(na@i*s o? Co@%essi&le 5l:id 5lo< !ol8=l Q9o+n ile( 13 Ne< Yo%=88 !8Ganesan Q Gas T:%&ines Q Ta'a M*G%a< Hill $:&lis+in; Co8 Ne< Del+i 1.

    ELECTI#E21TCO"USTION

  • 8/14/2019 Mechanical Engineering DTU

    52/74

    UNIT IEn;ine ?:nda@en'alsJ 5:els al'e%na'i>e ?:els ?o% IC en;ines T(e o? +(d%o *a%&ons8 Gasolinese*i?i*a'ions8 E??e*' o? En;ine a%a@e'e%s on e%?o%@an*e ?:el ine*'ion ?o% SI en;ines En;ine>e+i*le %oad e%?o%@an*e %oad e%?o%@an*e and ?:el e*ono@(8

    UNIT IIE@issions and ai% oll:'ionJ A:'o@o'i>e E@issions and '+ei% %ole in ai% oll:'ion8 $+o'o *+e@i*al

    s@o;8 C+e@is'%( o? s@o; ?o%@a'ion8 Co@&:s'ion in Ho@o;eneo:s @i':%es e@ission ?o%@a'ion8In*o@le'e *o@&:s'ion ?o%@a'ion o? +(d%o *a%&ons Ca%&on @onoide and oides o? ni'%o;en8

    Alde+(de e@issions8

    UNIT IIIIn?l:en*e o? desi;n and oe%a'in; >a%ia&les on ;asoline en;ine e+a:s' e@issions8

    H(d%o*a%&on E>ao%a'i>e E@issionsJ !a%io:s so:%*es and @e'+ods o? '+ei% *on'%ol8 Canis'e%s ?o%*on'%ollin; e>ao%a'i>e e@issions8 E@ission *on'%ol s(s'e@s ?o% ;asoline en;inesJ lo< &( *on'%ol*losed $C! s(s'e@ desi;n8UNIT I#

    E+a:s' '%ea'@en' de>i*esJ Ai% ine*'ion in'o e+a:s' s(s'e@8UNIT #T+e%@al %ea*'o%s Ca'al('i* *on>e%'o%8S'%a'i?ied *+a%;e en;ines8 Honda C!CC en;ine8

    Diesel en;ine *o@&:s'ion E@issionsJ So:%*es o? e@issions d:%in; *o@&:s'ion8 E??e*' o? ai% ?:el %a'ioseed ine*'ion 'i@in; on e%?o%@an*e and e@ission ?o%@a'ion8 D8I and I8D8I en;ine e@issions8

    UNIT #IMe'+ods o? %ed:*in; e@issions e+a:s' ;as %e*i%*:la'ion s@o=e e@ission ?%o@ diesel en;ines8

    E@ission Ins'%:@en'sJ Non- dise%si>e In?%a%ed anal(e% Gas*+%o@o'o;%a+ ?la@e ionia'ionde'e*'o% C+e@il:@ines*en' anal(e%

    2T CO8UTATIONAL FLUI/ /=NAICS 4CF/6L T 8 Credits

    3 1 0 C

    UNIT I

    In'%od:*'ion 'o C5D His'o%i*al &a*=;%o:nd I@a*' o? C5D

    UNIT II

    @

  • 8/14/2019 Mechanical Engineering DTU

    53/74

    T+e Go>e%nin; EF:a'ions o? 5l:id D(na@i*sDe%i>a'ion Dis*:ssion o? +(si*al @eanin;s and $%esen'a'ion o? ?o%@s a%'i*:la%l( s:i'a&le 'o C5D8

    UNIT III

    Ma'+e@a'i*al e+a>io% o? $a%'ial Di??e%en'ial EF:a'ionsJI@a*' on C5D

    UNIT I#

    asi* Ase*'s o? Dis*%e'ia'ionJIn'%od:*'ion 'o 5ini'e Di??e%en*e 5ini'e Ele@en's and 5ini'e !ol:@e Me'+ods8De'ailed '%ea'@en' o? 5ini'e Di??e%en*e @e'+od eli*i' and i@li*i' @e'+ods e%%o%s and s'a&ili'(anal(sis8

    UNIT #

    G%ids e ;%ids and :ns'%:*':%ed @es+es8Li?' %ed:*'ion do

  • 8/14/2019 Mechanical Engineering DTU

    54/74

    LoB Tem-erature Fuel CellsJ $%o'on e*+an;e @e@&%ane 5:el Cell H(d%o;en- /(;en ?:el *ellsal=aline and ol(@e%i* @e@&%ane '(esJ $+os+o%i* a*id 5:el Cell A*'i>e Ca'al(s' and i'sdise%sion Hea' and @ass '%ans?e% Cons'%:*'ion and Desi;n Li@i'in; %o&le@s Lo< 'e@e%a':%e?:el *ells o? o'+e% '(es- Me'+anol ?:el *ell H(d%o*a%&on ?:el *ell8UNIT III.i&h Tem-erature Fuel CellsJ Ad>an'a;es @ol'en ele*'%ol('i* ?:el *ell solid ele*'%ol('e ?:el CellCons'%:*'ion Ai% deola%ied *ells io*+e@i*al ?:el *ells Re;ene%a'i>e *ells Mi*%o ?:el *ells8UNIT I#

    Fuel Cell o-erationJ S:l( o? ?:el and ?:el %o*essin; H(d%o;en %od:*'ion s'o%a;e sa?e'( andin?%as'%:*':%e de>elo@en' ele*'%i*al a%%an;e@en' %e@o>al o? $%od:*'s @a'e%ials ?o% &a''e%(*ons'%:*'ion $%od:*'ion and :%i?i*a'ion o? ?:els8UNIT #A--li!ation o' 'uel !ell sstemsJ La%;e s*ale oe+i*les Do@es'i*o

  • 8/14/2019 Mechanical Engineering DTU

    55/74

    38 $LUG-IN HYRID ELECTRIC !EHICLES

    a8 Des*%i'ion and Ad>an'a;es

    &8 T(es o? $HE!

    *8 $HE! D%i>e '%ain *o@onen's

    48 IC ENGINES 5/R HYRIDS

    8 M/T/RS 5/R HYRIDS

    .8 ATTERIES 5/R HYRIDS

    78 ELECTR/NICSC/NTR/L CIRCUITRY 5/R HYRIDS

    8 SERIES AND MILD HYRIDS

    a8 Mild H(&%id d%i>e '%ain

    &8 Se%ies +(&%id d%i>e '%ain

    8 $ARALLED HYRIDS

    a8 $a%allel +(&%id d%i>e '%ain

    108EISTING HYRIDS

    a8 To(o'a $%i:s

    &8 Honda Insi;+'

    118$e%?o%@an*e Anal(sis o? H(&%id !e+i*les

    a8 5:el-e??i*ien*( anal(sis

    &8 E@issions Anal(sis

    *8 Li?e C(*le anal(sis

    128MISCELLENE/US TY$ES /5 HYRID !EHICLES

    /ESI

  • 8/14/2019 Mechanical Engineering DTU

    56/74

    ELECTI#E1

    >1/ EC.ANICAL #I"RATIONS

    L T 8 Credits 3 1 0 C

    UNIT IIn'%od:*'ionJ asi*s o? >i&%a'ion Ma'+e@a'i*al @odelin; o? >i&%a'in; s(s'e@s- Dis*%e'e andCon'in:o:s s(s'e@s Conse%>a'i>e and Non *onse%>a'i>e s(s'e@ i&%a'ions S'a'i* and d(na@i* *o:lin; $%in*ia@odes o? >i&%a'ion d(na@i* >i&%a'ion a&so%&e% *en'%i?:;al a&so%&e% !e+i*le s:sension s(s'e@%esonse8

    UNIT #IIn'%od:*'ion 'o !i&%a'ion @eas:%in; Ins'%:@en'sJ !i&%a'ion @e'e%s- >i&%a'ion si;na':%es- s'anda%ds-

    >i&%a'ion 'es'in; eF:i@en'- in si'e &alan*in; o? %o'o%s8

    Su&&ested Readin&sJ18 5:nda@en'als o? >i&%a'ions ala*+and%anMa;%a&Cen;a;e Lea%nin;828 Me*+ani*al >i&%a'ions Rao8S8S $ea%son Ed:*a'ion838 Me*+ani*al !i&%a'ions S%ini>as $ Ta'a M*;%a< Hill *o@an( Li@i'ed848 5:nda@en'als o? !i&%a'ions Ro;e% A A A@e%ind $:&lis+e% Co@an( $>' L'd88 En;inee%in; !i&%a'ion Daniel 9 In@an $%en'i*e Hall Ne< 9e%se(8.8 Me*+ani*al !i&%a'ionsJ T8 T+o@son

    @-

  • 8/14/2019 Mechanical Engineering DTU

    57/74

    >2/ Finite Element ethods

    L T 8 Credits 3 1 0 C

    UNIT I5:nda@en'al *on*e's o? '+e 5ini'e Ele@en' Me'+od8 !a%io:s ele@en' s+aes Disla*e@en' Model

    De%i>a'ion o? s'i??ness @a'%i ?o% '+e ele@en' and ?o% '+e en'i%e do@ain

    UNIT II

    IS/ a%a@e'%i* ele@en's Ele@en' s'%esses and s'%ains8

    UNIT III

    De%i>a'ion o? ?o%*e and disla*e@en' >e*'o%s ?o% '+e en'i%e do@ain8 o:nda%( *ondi'ions Sol:'ion o?

    '+e o>e%all %o&le@s8

    UNIT I#

    Ali*a'ions o? ?ini'e ele@en' @e'+od 'o solid @e*+ani*s

    UNIT #

    Ali*a'ions o? ?ini'e ele@en' @e'+od 'o ?l:id @e*+ani*s and +ea' '%ans?e%8

    UNIT #I

    Use o? So?'

  • 8/14/2019 Mechanical Engineering DTU

    58/74

    Unit IIMa'e%ial %oe%'ies in?l:en*in; in'e%a*'ionsJ In'%od:*'ion elas'i* %oe%'ies$las'i* de?o%@a'ion %oe%'ies %ela'ion &e'i'( o? s:%?a*es a&so%&ed s:%?a*e la(e%S:%?a*e ene%;( %ela'ion &e'eness o? l:&%i*a'ion-in'e%@edia'e 'e@e%a':%e &e+a>io% o? asolid l:&%i*a'ion &elo< @el'in; oin' e??e*' o? seed load on l:&%i*a'ion8 L:&%i*an's '+ei% %oe%'iesl:&%i*a'ion 'e*+niF:e in >a*::@ l:&%i*an' *oa'in; and i's s'a&ili'(8 T+eo%( o? elas'o+(d%od(na@i*

    l:&%i*a'ion ?il@ '+i*=ness ?%i*'ional s'%ess +ea' ?lo< ) 'e@e%a':%e se%>i*e li?e o? %olle% &ea%in;s8

    Su&&ested readin&s:

    "1, En;inee%in; T%i&olo;( &( Gie%"2, Ee%i@en'al Me'+ods in T%i&olo;( &( G

  • 8/14/2019 Mechanical Engineering DTU

    59/74

    iso*lini* and iso*+%o@a'i* lines in'e%%e'a'ion o? +o'o elas'i* s'%ess a''e%n di??e%en' @e'+ods o?*o@ensa'ion

    UNIT IICo@le'e anal(sis o? s'%ess a''e%n di??e%en' @e'+ods o? *o@ensa'ion *o@le'e anal(sis o? s'%essa''e%n &( s'anda%d @e'+ods +o'o elas'i* @a'e%ials s'%ess ?%in;e and s'%ain ?%in;e *ons'an'ssi@ila%i'( laa%io:s a%a@e'e%s e??e*'o? &iaial s'%ess ?ield8

    UNIT #IIntrodu!tion to oire Te!hni5ues,

    Su&&ested Readin&s:

    18 Ee%i@en'al S'%ess Anal(sis Ada@s Do>e $%en'i*e Hall In* 1.828 Ee%i@en'al S'%ess Anal(sis Rossen'+al

    ELECTI#E2

    1/ FRACTURE EC.ANICSL T 8 Credits

    3 1 0 CUNIT IIntrodu!tionJ In'e%-dis*ilina%( a%oa*+es in ?%a*':%e @e*+ani*s @odes o? de?o%@a'ion and ?ail:%e8

    UNIT IILinear Elasti! Fra!ture e!hani!sJ S'%ess *on*en'%a'ion in '+e >i*ini'( o? no'*+es and *%a*=sG%i??i'+s ene%;( *on*e' I%

  • 8/14/2019 Mechanical Engineering DTU

    60/74

    UNIT I#E7aluation o' Fra!ture e!hani!s 8arameters:$lane s'%ain ?%a*':%e 'o:;+ness 'es'in; i8e8 6i* 8

    UNIT #i!ro Stru!ture and Fra!ture Tou&hness:$+(si*al si;ni?i*an*e o? ?%a*':%e 'o:;+ness in %ela'ion 'o@i*%os'%:*':%e %in*iles ?o% '+e de>elo@en' o? ?%a*':%e %esis'an' @a'e%ials8

    UNIT #I

    Fra!ture Sa'e /esi&n 8rin!i-les:T%ansi'ion 'e@e%a':%es and @e*+ani*s a%oa*+ 6i* onl(8

    Fra!tured sur'a!es:A*F:ain'an*e a%io:s @a'e%ials li=es'eels C8I non ?e%%o:s allo(s e'*8

    Su&&ested readin&s:

    18$%as+an' 6:@a% Ele@en's o? 5%a*':%e Me*+ani*s Ta'a M*G%a

  • 8/14/2019 Mechanical Engineering DTU

    61/74

    UNIT #IFati&ue:T+e na':%e o? ?a'i;:e @e*+anis@ o? ?a'i;:e ?a'i;:e s'%en;'+ o? @e'als s'%ess*on*en'%a'ion ?a'i;:e s'%en;'+ ?a'i;:e ?ail:%e :nde% *o@&ined s'%ess *:@:la'i>e ?a'i;:e da@a;e d:e'o >a%(in; a@li':de o? s'%ess o'+e% ?a*'o%s a??e*'in; ?a'i;:e s'%en;'+8

    3/ ANAL=SIS AN/ S=NT.ESIS OF LIN9Aen'ional s(@&ols :sed in 6ine@a'i* dia;%a@8 De;%ee o? ?%eedo@ o? Lin=a;esJT(es and n:@&e% o? s(n'+esis G%:&le%s eF:a'ion8UNIT IICen'%e and Cen'%odesJ =enned(s '+eo%e@ o? '+%ee *en'%es de'e%@ina'ion o? *en'%es o? 6ine@a'i*C+ain

    UNIT III5ied and @o>in; *en'%odes >elo*i'ies o? oin's on a @a*+ine @e@&e% &( *en'%e @e'+od and%esol:'ion @e'+od8

    UNIT I#Desi;nJ 5o:% &a% @e*+anis@s o? Class I and Class II *+ainsJ Si@ila%i'( >a%(in; '%ian;le '%ans@issionan;le %ela'i>e ole @e'+od in>e%sion @e'+od and />e%la( @e'+od8

    UNIT #Co:le C:%>esJ Ro&e%'s laelo*i'( '+e E:le%- S:a>e%( EF:a'ion8

    UNIT #I5ini'e disla*e@en'J Ro'a'in; an;le ole '%ian;le *en'%e s(s'e@ and i's ali*a'ion ?o% '+%ee osi'ionlin= ;:idin; oosi'e ole F:ad%an;le ?o:% and ?i>e osi'ion lin= ;:idin; anal('i*al desi;n o? 4-&a%@e*+anis@ ?o% *o-o%dina'ed @o'ions o? *%an=s 5%e:dens'eins eF:a'ions8

    Su&&ested Readin&s:

    18 Ha%'en&e%; R8S and Dena>i'96ine@a'i* S(n'+esis o? Lin=a;es M*G%a< Hill

    28 A S Hall 9%6ine@a'i* ) Lin=a;e Desi;n $%en'i*e Hall India838 A@i'a&+ G+os+) A6 Malli*= Me*+anis@s ) Ma*+ine T+eo%(48 E%d@an )Sando% Me*+anis@ Desi;nJ Anal(sis )S(n'+esis$%en'i*e Hall88 T+eo%( /? Ma*+ines &( $en*o*= S+i;le(

    / RO"OTICS AN/ AUTOATION

    -1

  • 8/14/2019 Mechanical Engineering DTU

    62/74

    L T 8 Credits

    3 1 0 CUNIT IIn'%od:*'ion 'o Ro&o'i*s Classi?i*a'ion o? Ro&o's C+a%a*'e%is'i*s o? Ro&o's e%?o%@an*ead>an'a;es and disad>an'a;es o? a Ro&o' ind:s'%ial ali*a'ions o? a Ro&o'8

    UNIT II5:nda@en'als o? a Ro&o'J !a%io:s s(s'e@ s'%:*':%e and de?ini'ion 'e%@s %ela'in; 'o ind:s'%ialRo&o's &asi* 'e%@s %ela'ed 'o Ro&o' e%?o%@an*e and C+a%a*'e%is'i*s Con'%ol >ol:@e o? a Ro&o'

    UNIT IIIRo&o' lan;:a;es and %o;%a@in;8

    UNIT I#Con'%ollin; '+e Ro&o' s(s'e@sJ In'%od:*'ion 'o d%i>es Me*+ani*al H(d%a:li* $ne:@a'i* ele*'%i*d%i>es ?eed &a*= *on'%ol

    UNIT#

    Sensin; s(s'e@ ?o% a %o&o'J In'%od:*'ion '(es o? senso%s @a*+ine >ision A%'i?i*ial in'elli;en*eCon'%ol 'e*+niF:es8

    UNIT #IRo&o' sa?e'(J In'%od:*'ion o'en'ial sa?e'( +aa%ds sa?e'( lannin; *+e*= lis's sa?e'( ;:idelinesla'es' de>elo@en' in sa?e'( @eas:%e@en'8

    Su&&ested readin&s:

    18 In'%od:*'ion 'o Ro&o'i*sJ Me*+ani*s and Con'%ol 9o+n C%ai; $ea%son ed:*a'ion828 Ro&o'i*s ?o% En;inee%s Y86o%en M*G%a< Hill $:&li*a'ions8

    8RO/UCTION 18 /IENSIONAL GUALIT= EN

  • 8/14/2019 Mechanical Engineering DTU

    63/74

    L T 8 Credits

    3 1 0 C

    UNITI8rin!i-les o' measurementJ De?ini'ion o? Me'%olo;( di??e%en*e &e'i%on@en' and Te@e%a':%e E??e*'s o? s:o%' ali;n@en'e%%o%s ali*a'ion o? Leas' SF:a%e %in*iles e%%o%s in @eas:%e@en' o? aF:ali'( a%ia&les8Len&th Standards: Line s'anda%ds end s'anda%ds and elen;'+s'anda%ds '%ans?e% ?%o@ line s'anda%ds 'o end s'anda%ds8 N:@e%i*al &ased online s'anda%ds8 Sli ;a:;es i's :se and *a%e @e'+ods o? &:ildin; di??e%en'+ei;+'s :sin; di??e%en' se's o? sli ;a:;es8Limits+ 'its and toleran!esJ !a%io:s de?ini'ions IS1-1.3 di??e%en' '(eso? ?i's and @e'+ods 'o %o>ide '+ese ?i's8 N:@e%i*al 'o *al*:la'e '+e li@i's ?i'sand 'ole%an*es as e% IS 1- 138 IS/ s(s'e@ o? li@i's and ?i's Ga:;esand i's '(es li@i' ;a:;es l:; and %in; ;a:;es8

    Ga:;e Desi;n Ta(lo%s $%in*ile an'a;es8Me*+ani*al Co@a%a'o%sJ 9o+ansonMi=%o=a'o% and Si;n@a Me*+ani*alCo@a%a'o%8Me*+ani*al - o'i*al *o@a%a'o%8Ele*'%i*al and ele*'%oni* *o@a%a'o%s8$ne:@a'i* *o@a%a'o%s S(s'e@s o? $en:@a'i* ;a:;in;J 5lo< '(e and

    &a*= %ess:%e '(e di??e%en' '(e o? sensi'i>i'ies and o>e%all @a;ni?i*a'ion8Sole $ne:@a'i* ;a:;e and di??e%en'ial *o@a%a'o%s8N:@e%i*als8

    UNIT IIIAn&ular easurementJ Sine a% di??e%en' '(es o? sine &a%s :se o? sine&a%s in *on:*'ion el e%%o%s in :se o? sine &a%s8 N:@e%i*als8$%in*ile and ision &( %e*ision $ol(;ons8 Calie%$%in*ile Cali&%a'ion o? ol(;ons8 N:@e%i*al &ased on *i%*:la% di>ision8

    Strai&htness and 'latnessJ De?ini'ion o? S'%ai;+'ness and 5la'ness e%%o%8De'e%@ina'ion o? s'%ai;+'ness e%%o% o? s'%ai;+' ed;e el o% a:'o *olli@a'o%8N:@e%i*alsUNIT I#S!reB Thread easurement: E%%o%s in '+%eads Meas:%e@en' o? ele@en'so? s*%e< '+%eads @ao% dia@e'e% @ino% dia@e'e% i'*+ ?lan= an;le ande??e*'i>e dia@e'e% "T

  • 8/14/2019 Mechanical Engineering DTU

    64/74

    ?lan= an;les and i's @a'+e@a'i*al de%i>a'ion8e%nie%*alie% Cons'an' *+o%d @e'+od &ase 'an;en' @e'+od and de%i>a'ion o?@a'+e@a'i*al ?o%@:lae ?o% ea*+ @e'+od8 Tes' l:;s @e'+od ?o% *+e*=in;i'*+ dia@e'e% and 'oo'+ sa*in;8 Meas:%e@en' o? Gea% $i'*+ $a%=insonGea% Tes'e%8N:@e%i*als8UNIT #

    a!hine Tool Ali&nmentJ Ma*+ine 'ool 'es's and ali;n@en' 'es's on la'+e8Ali;n@en' 'es's on @illin; @a*+ine8 Ali;n@en' 'es's on a %adial d%illin;@a*+ine8Inter'erometr: $%in*ile o? @eas:%e@en' In'e%?e%o@e'%( alied 'o ?la'ness'es'in; s:%?a*e *on'o:% 'es's o'i*al ?la's 'es'in; o? a%allelis@ o? a s:%?a*e28 A/#ANCE/ AC.ININ< 8ROCESSES

    L T 8 Credits3 1 0 C

    UNIT I

    -=

  • 8/14/2019 Mechanical Engineering DTU

    65/74

    In'%od:*'ionJ @e*+ani*al ad>an*ed @a*+inin; %o*esses need o? ad>an*ed @a*+inin; %o*esses+(&%id %o*esses

    Ul'%asoni* @a*+inin; "USM,J In'%od:*'ion @e*+ani*s o? *:''in; a%a@e'%i* anal(sis %o*ess*aa&ili'ies ali*a'ions8

    UNITIIA&%asi>e e' @a*+inin; "A9M,J In'%od:*'ion A9M se' :s ;as %o:lsion s(s'e@ a&%asi>e ?eede%

    @a*+inin; *+a@&e% A9M nole a&%asi>e a%a@e'%i* anal(sis %o*ess *aa&ili'ies ali*a'ions8

    UNIT IIIa'e% e' @a*+inin;J In'%od:*'ion %o*ess *+a%a*'e%is'i*s %o*ess e%?o%@an*e ali*a'ions8

    A&%asi>e a'e% e' @a*+inin;J o%=in; %in*ile a%a@e'%i* anal(sis %o*ess *aa&ili'ies andali*a'ions8

    A&%asi>e ?inis+in; %o*essJ o%=in; %in*ile @a'e%ial %e@o>al and s:%?a*e ?inis+ a%a@e'%i*anal(sis %o*ess >a%ia&les and ali*a'ions8

    UNIT I#

    Ele*'%o dis*+a%;e @a*+inin; "EDM,J In'%od:*'ion o%=in; %in*ile a%a@e'%i* anal(sis %o*ess>a%ia&les %o*ess *+a%a*'e%is'i*s ali*a'ions +(&%id %o*esses s:*+ as ele*'%o dis*+a%;e ;%indin;dia@ond ;%indin; an*ed @a*+inin; %o*esses8

    Su&&ested readin&s:

    18 Ad>an*ed @a*+inin; %o*ess D%8!8689ain-@

  • 8/14/2019 Mechanical Engineering DTU

    66/74

    28 Non '%adi'ional @e'+ods o? @an:?a*':%in; s+a+ )$ande(

    >38 AUTOATION IN ANUFACTURINi'( >s a:'o@a'ion @a'e%ials +andlin;s(s'e@s8 E>al:a'ion o? a:'o@a'i* %od:*'ion8 Desi;nin; ?o% a:'o@a'ion8

    UnitII Hydraulic System

    H(d%a:li* Principles. Hydraulic pumps: Characteristics, Pump Selection, Pumping Circuits.

    Hydraulic Actuators: Linear, Rotary, Selection, Characteristics. Hydraulic Valves: Pressure,

    Flow, Direction Controls, Applications. Servo and Proportional Valves, Hydraulic Fluids:

    Symbols.

    Unit III Pneumatic Systems

    $ne:@a'i* fundamentals. $%od:*'ion o? *o@%essed ai%8 T(es o? *(linde%s8

    Con'%ol >al>esJ di%e*'ion %ess:%e and ?lo

  • 8/14/2019 Mechanical Engineering DTU

    67/74

    A:'o@a'ion in @a*+ine 'oolsMe*+anied ?eedin;8 A:'o@a'i* asse@&l(8A:'o@a'i* @a*+ine 'ool *on'%ol8 T%ans?e% lines8 5a*'o%( a:'o@a'ion

    Su&&ested readin&s:1 H(d%a:li* and $ne:@a'i* Con'%ols R S%ini>asan !ia( Ni*ole i@%in's $>'8

    L'd8 C+ennai8

    2 In'%od:*'ion 'o H(d%a:li* and $ne:@a'i* S8 Ilan;o and !8 So:nda%a%aan$%en'i*e-Hall o? India Del+i

    3 /il H(d%a:li* S(s'e@s J $%in*iles and Main'enan*e S8 R8 Ma:@da% K Ta'aM*G%a

  • 8/14/2019 Mechanical Engineering DTU

    68/74

    ?eresentations &%imulations * arious models of C'D* 'nalytical rograms* Different models of C'D *

    'd!antages of C'D & its limitations * etc.

    0NIT59

    C'##* Tyes of C'##* 4rou technology * "erit/ Demerits* Database management in the de!eloment of

    C'##* C'D

  • 8/14/2019 Mechanical Engineering DTU

    69/74

    ELECTI#E218 Gualit ana&ement Sstems

    L T 8 Credits 3 1 0 C

    0nit5: Int&oduction to Qualit

    Definition of Kuality< roduct* user* !alue* and manufacturing based ersecti!es* Dimensions of Kuality*

    Kuality #lanning* Kuality costs< otimi9ation of 7uality costs* Kuality in manufacturing* ser!ices* health care*

    educational systems* the se!en tools of 7uality.

    0nit57: *-iloso;-i"s in Qualit Mana3"'"nt Sst"'s

    #hilosohies of Kuality 4urus< Deming* Muran* Crosby* Feigenbaum* $shi+awa* Taguchi. Comarison ofKuality #hilosohies Kuality "anagement awards< Deming ri9e* "alcolm Baldrige 2ational Kuality 'ward*

    Iirlos+ar 'ward 'wards.

    0nit5+: Statistical *&oc"ss Cont&ol

    $ntroduction to Kuality characteristics< !ariables and attributes* Tyes and causes of !ariations* Control Charts

    for !ariables and attributes* #rocess caability.

    0nit58: Acc";tanc" Sa';lin3

    %amling rocess and lots formation 'd!antages and alications of accetance samling characteristics of

    .C. Cur!e %ingle* double* multile* se7uential samling '%2* 'T$* 'K>* 'K* 'K>* >K>* #roducer,sand Consumer,s ris+s.

    0nit59: ISO

  • 8/14/2019 Mechanical Engineering DTU

    70/74

    28ATERIALS ANAocation* different tyes of stores* methods of storing* safety and security of materials* stores e7uiment

    materials handling e7uiment* factors affecting materials handling* stores issues and receits* rocedures* formsand olicies in stores transactions* stores accounting* stores organi9ation* materials safety and security.

    0nit58: Mana3"'"nt of su&;lus o>sol"t" and sc&a; 'at"&ials

    "anagement of surlus obsolete and scra materials* reasons for accumulation of surlus obsolete and scra

    materials* methods of disosal* regulations and rocedures.

    0nit59: *u&c-asin3

    #lanning urchasing materials* norms of !endor rating* CE$ methodology* Maanese industry: selection and

    de!eloment* urchasing rocedures and methods* legal asects* insurance of materials* suly management

    sources of suly* out sourcing.

    0nit56: Su> cont&actin3

    %ub contracting* reasons for subcontracting* criteria for selecting sub contractors* rating* factors affectingsubcontract rate fiing H internal and eternal subcontract.

    Su33"st"d !"adin3s:

    1. $ntegrated materials managementeendersFearon H

    6ni!ersal Boo+ %tall

    @. #urchasing 'nd In>en'o%( Con'%olH I % "enon H Gheeler#ublishers-. "aterials "anagement H arma " " H %ultan Chand 'nd %ons

    http://www.indiastudychannel.com/resources/36447-VTU-MBA-Syllabus-MATERIALS-MANAGEMENT.aspxhttp://www.indiastudychannel.com/resources/36447-VTU-MBA-Syllabus-MATERIALS-MANAGEMENT.aspx
  • 8/14/2019 Mechanical Engineering DTU

    71/74

    38 SU88L= C.AIN ANA

  • 8/14/2019 Mechanical Engineering DTU

    72/74

    0nit 5: Funda'"ntals of Financial Mana3"'"nt

    $ntroduction* b0ecti!es* goals and functions of financial "anagement. Time !alue of "oney* ?is+s and

    ?eturns* aluation of %ecurities.

    0nit 57: Financial $nstruments and "ar+ets

    Forms of Business rgani9ations* caital structure* Construction analysis and interretation of standard

    financial statements* Di!idend olicy and share !aluation.

    0nit5+: Ca;ital 1ud3"tin3

    Concet of erating cycles and wor+ing of Caital "anagement Caital Budgeting : Cost of caitalin!estment decisions and ?is+ analysis in Caital Budgeting

    0nit ? 8: Financial *lannin3

    #lanning of rofit and le!erages (oerating and financial) ?is+ and ?eturn: 2ature of ris+* $nter

  • 8/14/2019 Mechanical Engineering DTU

    73/74

    'dhesi!es* 'dhesi!e taes. Cushioning materials and roerties* reinforcements. %titching methods. %eals and

    enclosures. >ining comounds and lac7uers. >abels and instant labeling. $n+ 0et rinting and bar coding.4rahic design. #rinting techni7ues$4' rocess.

    "icrosystem design.* "icrosystem ac+aging..

    ;

  • 8/14/2019 Mechanical Engineering DTU

    74/74

    0NIT /I$ntegrated %mart %ensors and "E"%* $nterface Electronics for "E"%*"E"% %imulators* "E"% for ?F 'lications. Conclusions & Future Trends

    Su33"st"d &"adin3s:

    Su**este' re"'$%*s:

    1."E"% & "icro systems Design and "anufacture Tai