ME 1212 F14 Test #1 is a two part test.Read instructions carefully below.Part 1: (10 points) is the CAD portion to be completed on your own time.Due 9/23/14 @ 12:30 at class. Part 2: (10points) is Tuesday 9/23/14@ 12:30 normal class time.The format is Question / Answer. Part #1 Cad Portion, Due 9/23/14 @ 12:30 before class. See page 3 for part Example Drawing . A clearer view is available on Harvey. Submit paper copy of complete screen shot of drawing.Do not forget your signature on drawing. It must be the entire screen, format the paper to horizontal, format for narrow margins and be sure drawing is zoomed to max on the screen. It must be clear enough to read. If I cant read it, then I cant grade it.Be sure Create a model and drawing exactly as shown on example drawing. The drawing must be on your own Template. Template:The template must have you own company name in position shown. You part file should be saved with your TU-ID as a prefix TU-IDTest 1 : : TU-IDTest 1 Add drawing Title Company Name Drawing file name Units:MMGS FONT:use Arial 14 point font for dimensions and annotations on drawing Engrave your name on the part as shown.(Sketch name on face, then extrude cut 2mm deep) Expand drawing view by pressing +sign so that construction methods for model are displayed.