mdhb3204 - user manualdownloads.iotsmartsolutions.net/products/mobile... · mdhb3204 is a...

1- 70

MDHB3204

Copyright 2016-2017, IOT Smart Solutions, LLC All Rights Reserved

User Manual

Hybrid Mobile Digital Recorder

2 - 70

NoticeThe information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without any notice.

The purpose of this manual is to kindly aid the user for the operation for our MDVR. The user should have a basic understanding of computer operation and basic knowledge of how to connect peripherals and make some settings.

CopyrightUnder copyright laws, the content of this manual may not be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine- readable form, in whole or in part, without prior written consent of IOT Smart Solutions, LLC. Copyright (2016-2017)

3-70

Guarantee & Warnings1) Electrical Apparatus Safety

All installation and operation should comply with local electrical safety norms.2) Transportation

In the process of transportation, storage and installation, please avoid heavy stress, violent vibration,impact and water splashing.

3) InstallationInstall the equipment in accordance with the requirements, handle carefully. Do not heavily press theequipment before the MDVR installation is finished.

4) Requirements on Engineers & TechniciansAll the work of checking and maintenance should be done by qualified technicians and engineers.We do not undertake any responsibility caused by unauthorized modifications.

5) Requirements on EnvironmentThe equipment should be installed and stored in a cool and dry place, away from direct sunlight,flammable or explosive substances, etc. Keep gaps not less than 3cm around the device to facilitateventilation for cooling.

6) AccessoriesMake sure to use accessories from the manufacturer recommended in the attachment.Insulate circuit ground and metal shell for all the peripherals.Before installation, please open the package and ensure that all parts are included.If there are any problems, please contact us as soon as possible.

4-70

Contents1. PRODUCT CHARACTERISTICS......................................................................................................................6

1.1. OVERVIEW.........................................................................................................................................61.2. SPECIFICATIONS............................................................................................................................. 61.3. SYSTEM DIAGRAM..........................................................................................................................81.4. EXTERNAL INTERFACE................................................................................................................. 81.5. HARD DISK INSTALLATION........................................................................................................... 91.6. DEFINITION AND PICTURES OF EXTERNAL CABLES........................................................ 10

2. LOCAL MANAGEMENT..................................................................................................................................112.1. LOGIN INTERFACE........................................................................................................................ 122.2. RECORD SEARCH:........................................................................................................................142.3. LOG SEARCH..................................................................................................................................172.4. SYSTEM STATUS........................................................................................................................... 202.5. BASIC SETUP..................................................................................................................................22

2.5.1. REGISTER INFOMATION (SETUP VEHICLE INFORMATION).....................................222.5.2. TIME SETUP............................................................................................................................ 232.5.3. START UP.................................................................................................................................252.5.4. USER SETUP...........................................................................................................................262.5.5. NETWORK................................................................................................................................282.5.6. APPLICATION..........................................................................................................................31

2.6. SURVEILLANCE..............................................................................................................................322.6.1. LIVE VIEW................................................................................................................................ 322.6.2. RECORD...................................................................................................................................342.6.3. IPC SETUP............................................................................................................................... 372.6.4. PTZ.............................................................................................................................................39

2.7. DATA COLLECTION........................................................................................................................392.7.1. GENERAL................................................................................................................................. 392.7.2. SNAP SETTING.......................................................................................................................412.7.3. ECO-DRIVING ....................................................................................................................... 43

2.8. ALARM.............................................................................................................................................. 442.8.1. BASE..........................................................................................................................................442.8.2. VIDEO........................................................................................................................................512.8.3. ADVANCE................................................................................................................................. 54

2.9. MAINTENANCE............................................................................................................................... 552.9.1. CONFIGURATION...................................................................................................................562.9.2. DATA EXPORT.........................................................................................................................562.9.3. UPGRADE................................................................................................................................ 572.9.4. STORAGE.................................................................................................................................582.9.5. DEFAULT.................................................................................................................................. 59

3. WEB MANAGEMENT..................................................................................................................................... 593.1. LOGIN INTERFACE........................................................................................................................ 593.2. MAIN INTERFACE...........................................................................................................................603.3. PLAYBACK....................................................................................................................................... 61

5-70

3.4. MAINTENANCE............................................................................................................................... 633.4.1. BASIC INFORMATION........................................................................................................... 643.4.2. DEVICE MODULE...................................................................................................................643.4.3. STORAGE DEVICE................................................................................................................ 653.4.4. VERSION INFORMATION..................................................................................................... 66

3.5. CONFIGURATION...........................................................................................................................664. STORAGE CAPACITY CALCULATION.......................................................................................................685. FAQ.................................................................................................................................................................... 69

6-70

1. PRODUCT CHARACTERISTICS

1.1. OVERVIEWMDHB3204 is a functional Hybrid Mobile Digital Video Recorder specially designed for vehicle

video surveillance and remote monitoring. It has a high-speed processor and embedded operating system, combining with the most advanced H.264 video compression / decompression technology, 3G network, GPS positioning technology, as well as WIFI. It supports not only video recording in 720P, WD1, WHD1, WCIF, D1, HD1 and CIF formats, but also vehicle travel information recording and wireless data upload. With center software it also achieves alarm linkage central monitoring, remote management and playback analysis. It is easy to use with simple design, multi-functions, superior anti-vibration, flexible installation and high reliability.

1.2. SPECIFICATIONSFunction Overview Preview, Recording, Playback, Network, Locating

SystemOS Linux 3.0.8Control Mode

Video

Input 2 channels 720P + 4 channels WD1Output 1 channel

Total ResourceNTSC (2 x 30)FPS 720P / (4 x 30)FPS WD1 - PAL (4 x 25)FPS WD1

Video Signal StandardElectrical level: 1Vpp Impedance: 75Ω NTSC/PALOptional

AudioInput 6 channels (Including IPC x 2)Output 1channelAudio Signal Standard Electrical level: 2Vpp Input impedance: 4.7kΩ

DisplayDisplay Split 1/4/9OSD GPS information, alarm, vehicle No., speed, date/timeOperation Interface Semi-transparent GUI

Recording

Video/Audio CompressionVideo: H.264Audio: ADPCM, G.711A, G.711U

Image Resolution

Digital:720P(1280X720);Analog:NTSC:WD1(928X480), WHD1(928X240),WCIF(464X240), D1(704x480), HD1(704x240),CIF(352x240);PAL:WD1(928X576), WHD1(928X288), WCIF(464X288), D1(704X576), HD1(704x288), CIF(352x288);

Image Quality 1-8 levels adjustable (1 is the best)Recording Mode Boot up/Manual/Schedule/Alarm (sensor trigger, speed,

CPT-7, USB-EC, Network, Mouse

7-70

acceleration, video loss, temperature)Pre-recording 0-60minutesPost-recording 0-30 minutesMirror/Dual Recording Yes (Using SD Cards) Front or Rear

PlaybackPlayback Channel 1 channel by local playbackSearch Mode Date/time, channel, event

Network

3G EVDO/WCDMA (Optional) Support 1 Sim CardWIFI 802.11b/g/n (Optional)Ethernet RJ45 (10/100M) x1IPC Ethernet 6-pin DJ M12(10/100M x 4, PON power supply)

Locating GPS Location tracking, speed detection, time sync (Included)Storage Hard Disk 2.5" SATA hard disk x 1 up to (2)TB (Not Included)

Interface

USBUSB2.0 × 2(One for USB-EC, one for external mirror recording)

SD Card SD × 2 Recommended (32GB / 64GB / 128GB/ Class 10/SDHC Card (Not included)

RS232 RS232 × 2RS485 RS485 × 2Sensor 8 inputs, 2 outputsSerial G-sensor( Internal)Speed 1 channel pulse speed detectionInterface Control Panel CPT-7 (Optional)Intercommunication I MIC interface

Power

Input DC 8-36VOutput 5V@1000mA, 12V@1000mAMax Power Consumption 79.2WStandby Power Consumption ≈0W

Others Water Proof Rate IP54PhysicalCharacteristic

Dimension (L × W × H) 255.3mm x 150mm x 89.1mmWeight 2.2Kg / 4.85Lb

EnvironmentOperating Temperature -40℃- +70℃(With heater) or -10℃- +70℃

Operating Relative Humidity 8%-90%（No Condense）

Front (Not included), Rear (Included in XTS-MD-FB (Optional)

8-70

1.3. SYSTEM DIAGRAM

1.4. EXTERNAL INTERFACEDIMENSION (Unit: mm)

FRONT PANEL

9-70

Serial No. Description1 Hard disk module2 Status LED3 USB interface

REAR PANEL

Serial No. Print Description

1 Power DC8-36V Power Input

2 Sensor Switch Interface

3 Serial Serial Interface

4 A/V IN1~2 Analog Audio/Video Input 1~2

5 IPC1~4 PON Power Supply IPC1~4

6 GPS/BD Antenna Interface

7 3G/4G Antenna Interface

8 WIFI Antenna Interface

9 USB USB 2.0 Interface

10 LAN Network Interface

11 Panel Control Panel Interface（CPT-7）

10-70

1.6. DEFINITION AND PICTURES OF EXTERNAL CABLESALARM CABLE DEFINITION

1.5. HARD DISK INSTALLATION

11-70

SERIAL PORT DEFINITION

2.LOCAL MANAGEMENTN9M supports 3 kinds of local setting methods:

1) Connect monitor to mobile DVR and make sure it can play real time output image. Then connect

12-70

mouse to USB interface at the front panel to have MDVR parameter setting.2) Connect the touch panel CPT-7 to mobile DVR to have MDVR parameter setting. (RS232 serial port

is needed when they are model MDAH1401 and MDAH2401, while other models can connect to the panel interface directly.)

3) Some models support MDVR parameter setting via remote controller.

2.1. LOGIN INTERFACEWhen operate the device, user needs to have permission certified.

1) Press the remote control 【LOGIN / LOCK】or【SETUP】, the login screen will pop up.2) Right click the mouse, the shortcut menu will pop up, left click login picture, login screen will pop up.3) Left click on the login button to login and right click to log out.

Login Notice:1) Software is automatically assigned by user name and password, it can be divided into user and

administrator privileges.

13-70

2) Password options cannot be closed, but it can be set to null; when it is empty, user do not need toenter the password to login。

Login interface Introduction: User name：1) Select users from the drop-down box. There are admin and user as defaults.2) Currently, it can show two users and one admin. Password：1) User can enter the operation interface if entering the right password;2) User must enter the right password again if entering the wrong ones;3) Click cancel to exit the login interface; Language：1) It supports language switch. "language" (Lang) means the current interface adopts Chinese;2) It will automatically switch once selecting the language.3) Currently, it supports Chinese and English;4) After switching languages, it will not restore language option when user restores the factory

Settings;

Default password and permission table is as follows:Default Password Related User Related Authorityadmin admin All AuthoritiesUser user Search and playback

The password input Instruction:1) User can set password with remote controller, mouse or touch panel CPT-7.

Move cursor to password, click Enter and enter the right number.

2) Move the cursor to the number position, press【Enter】or left click mouse button to select thecorresponding number.

3) Move the cursor to 【123】, press 【Enter】or mouse to choose input type, such as numbers, letters,

14-70

or special characters.4) 【ab】means lower case letters,【123】means numbers,【AB】means capital letters; the highlighted

place of background refers to the current cursor position.5) Move Cursor to , Press【Enter】or left click mouse to move between the contents that have

entered.

6) Move Cursor to , Press 【Enter】or left click mouse to delete the previous input contents.

7) Move Cursor to , Press 【Enter】or the left click mouse to exit the keypad, the entered

contents will be written to the edit box.8) Move Cursor to【Esc】 position, Press【Enter】or the left click mouse to exit the keypad, the entered

contents will not be written to the edit box.

Main interface

2.2. RECORD SEARCH:

15-70

Video search interface contains video file search, video data backup and video playback function.When there is a hard disk or SD card, enter the video search interface. Following is the REC Searchinterface:

In the calendar, the color below the dates means:a. No color means no video.b. Green means common video.c. Red means alarm video.d. Yellow means there are alarms and the video files are automatically lock (lock video).Source: select the source of the video, there are main video, sub video and mirror video.The main record means HDD record while sub record and mirror record are dual-stream records.

Select the date with record, click next, and then enter the following interface:Following are the search options and search result interface:

16-70

Video type: User can choose all record, alarm record or normal record.Channel: The channel is optional and mark with color that has record. The channel with gray cannot bechosen if there is no record. As to different record type, it will show different relates.Click search button in the record search detail page, user can enter then record search result page.Time Bar: Time bar shows three time points, 0 o'clock, 12 o'clock, 24 o'clock. It shows what type ofvideos during the time according to the marked channel.Channel No: According to the situation of video for each channel video the day, the video will bedisplayed on the time line. Tick the channel if user wants to playback the video.Note: channel number is displayed from 1~20, please up page up/page down button to change channelButton descriptionVideo playback: Choose the channel No., select start time to play < default start from 0 >, click theplayback button to playback the video.

In playback interface, user can choose fast forward or fast backward to play the video, the button in the

17-70

middle of screen can switch the channels. The image stops and it will not exit automatically whenplaying to the last video of the day.Time period settings: Click the time setting button, select start time and end time, it will back up orplayback the video in the selected time period. Click clip to export the video, the file format canbe.264< comprehensive file >, also can be.avi format.

Video export: Select the channel that has the video files, click this button, all the video files in theeffective time period will be exported to the external USB peripherals, file format canbe.264<comprehensive file >, also can be avi format.User can also get out the hard drive or SD card, export and playback the video by professional software.

2.3. LOG SEARCHIn the log search interface, it records and displays all alarm events and login operation log. Enter the"log query”, the interface will be shown as following:

18-70

Log Search interface instruction:Calendar: the date with log will be marked on the calendar with green color.Remark: There is no color classification in the “log mark”, and all are green ones.

19-70

Log search interface instruction:Start time: the start time for searching log filesEnd time: the end time for searching log filesLog types: classification of log search, including the operation log and alarm log and locking logOperation log search interface instructionLog includes the following information:Log time: the time when event is triggeredLog name: event contentSupports page up/page down and export all log files of the specified date.Do not support link to video file.Log searchAlarm type: It includes all alarms, IO alarm , panic alarm and over speed alarm.Log includes the following information:Log time: the time when event is triggeredLog name: event contentSupports page up/page down and export all log files of the specified date.

Supports link to video file, click on button to playback video files

Lock log searchLog includes the following information:Log time: the time of when event triggered.Log name: event contentLog will be recorded according to channel number, each channel will have a lock log file.Support page up and page down.Can’t export all log files of the specified date.

Can link to video file, click on button to playback video files.

Unlock: Select log, and unlock it. Then the alarm log of lock will be cleared.Remark:

20-70

When lock the video file, system will record alarm log and lock log. The locked video file can only beunlocked from alarm log.

2.4. SYSTEM STATUSUser can login the interface with no access restrictions. System- Version information

System- Modules

System-Server status

21-70

System - Environment

System-Storage:

22-70

2.5. BASIC SETUPClick setup button and enter the following interfaces:

2.5.1. REGISTER INFOMATION (SETUP VEHICLE INFORMATION)

Register information-Device info:

Device ID: Currently, it is not useful. Register information- Vehicle info

23-70

Vehicle Number：When connected with PAD, the vehicle number is needed.Vehicle plate：Input manually.Line number：Input manually. Register information—Driver info:

Driver number: Input manually.Driver name: Input manually.

2.5.2.TIME SETUP

Time setup-GeneralDate format: Setup the date format of deviceTime format: 24 hours or 12 hours

24-70

Time zone: Range from -12th district ~ +13th district

Time-Time Sync

Date/Time: Device time, from 2000-01-01 to 2036-12-31Satellite: Synchronize time with GPS satellite. Once GPS signal changes to valid, device willsynchronize timeCenter Server: synchronize time with center serverNTP sync: synchronize time with NTP serverRemark:

1) Synchronize time according to time zone2) Multi-mode can be selected for time synchronization. If one works, the others take no affect.

Otherwise, it switches to another sync mode every 5 minutes. Time setup-DST

25-70

Enable: Select to enableOffset: After enabling DST, adjust the hour manuallyMode: Setup DST according to week or dateStart: Time to start DSTEnd: Time to end DST

2.5.3. START UP

Startup-ON/OFF

ON/OFF mode: 3 modes, including ignition, timer and ignition or timer.Ignition: Input ignition delay time for shutdown delay functionTimer: When setup the start mode as Timer, please setup the start time and end time

26-70

Under this mode, MDVR’s start up or shut down time will not affect the ignition.

Remark:If use setup as Ignition or Timer Mode, Ignition ON or Timer start time can trigger MDVR start up.And only when Ignition off and Timer end time, MDVR will shut down.

Start-Sleep

Sleep Mode: Currently, there is only no consumption standby mode available.Low Volta protect: Enabling the low voltage shutdown protection mode selected.Battery low voltage: Protect the vehicle battery. When consistently below the standard value, it willcountdown shutdown. As for a 12V vehicle, the default is 9V, while a 24V vehicle is 21V.Voltage start up: low-voltage protection, when the battery voltage is consistently greater than thestandard value, it will automatically boot. As for a 12V vehicle, the default is 12.5V, while a 24Vvehicle is 24.5V.Low volt upload: The low-voltage protection will be reported to the platform after it is ticked.

2.5.4. USER SETUP

In the basic settings, click user settings, enter the following interface, user can enter setting menu.

27-70

User name: The default ones are admin and user.User Group: It is divided into administrator and ordinary user.It supports delete user function. Select the user and click "Delete User" button. Please be noted that theadministrator cannot be deleted.It supports add user function. Click "Add User" button, then enter the following interface.

Remark:1) Only administrators can add users.2) Users can add up to two.3) User name cannot be empty, not the same with the existed user name while the user password can

be empty.User name and password can be modified. Select a user, click the "Edit User" button, enter the followinginterface:

28-70

Modify the user name and password to confirm the operation temporarily. There is no need to verify theold password, Administrator user name cannot be modified.

2.5.5. NETWORK

In the basic settings, click Network Settings, enter the following interface, user can set networkparameters. Network - Local

Automatically obtain IP: Dynamic acquisition, DNS can also be statically configured to dynamicallyobtain.Use the following IP: Static IP, need to use a static DNS.Remark:Switch from static IP to automatically obtain IP mode, it can display dynamic IP, but the static IPparameters will not be covered, to restore the last saved static IP after switching back. Network Settings - Ports:

29-70

WEB port No.: The default is 80. Network- WIFI

Enable: Select to enable WIFIESSID: Manually input the address of APEncryption: It supports NONE, WEP and WPAPassword: Manually inputStatic IP: Select to use static IP, or MDVR will get dynamic IP

Network-Communication:

Dialing wireless network, user needs to choose the module type and setup dialing parameters

30-70

When entering the dialing setup interface, it searches the wireless module type automatically. It showsNo Service when there is no module.Network type: The default one is Mix, 2G/3G and 2G/3G/4G optional.Dialing parameter：It includes access point, user name, password, data service number, and enter SIMparameters provided by the manufacturer. The default is empty, the program comes with emptyarguments by dialing.Certification：Supports PAP or CHAP.Remark:When there is SIM and normal 3G/4G signal, it will dial automatically.

Network- Server

Center server: It supports 6 servers at most, and server 1 cannot be deleted manually.ON: Enable the current server.

31-70

Protocol type: The default one is N9M.Enable network: There is local, WIFI and module optionalRegister server address: To run the registration server address.Registration server port: To run the registration server port.Media server address: To run the media server address.Media server port: To run the media server port.

2.5.6. APPLICATION

Application-FTP Client

FTP Enable: Enable FTP.

32-70

Server: To run FTP server address.Port: To run FTP server port. (The default one is 21.)User name/password: The accounts distributed by FTP server.

2.6. SURVEILLANCE

2.6.1. LIVE VIEW

Live view-->PreviewReal-time Setting Interface:

Preview audio: Enable the audio when live view the video.Image setup: Set the live-view parameters, including brightness, contrast, etc.Startup Screen: Set the live-view screen, it can be single-screen or quad screen or nine screenChannel: Set the channel when live-view Live view-Auto Loop:

33-70

Screen: Totally 32 screens can be added.Mode: 1x1, 2x2, 3x3 optional.Channel: Included channel number.Duration: Duration for each screen.Edit: Delete or Edit.Add screen: Add polling screenAuto polling: Enable the auto pulling Live view-Live OSD :

It displays the information on screen, such as time, speed, license plate, GPS...The default is only the time, and the position cannot be set.

34-70

2.6.2. RECORD

Record-->General

Video type: Default is PAL, NTSC optionalOverwrite: The earliest recording file will be deleted while the HDD or SD card is full to realize looprecording.Lock duration: Protect the record file to be deleted by fault, default is 7 days.Pre-recording: Pre-record before the alarm happens. Default is 15min, 0-60min optional. Record-->Main Stream:

35-70

Channel: The total channel numbers of the device, including analog and digital channels.Channel name: Change the name manually.Enable: Enable the main stream record functionResolution: The analog channel supports D1/HD1/CIF/WD1/WHD1/WCIF while the digital one supports720P.Frame Rate: Frame Rate of the recording.Quality: Picture Quality of the recording.Record mode: Ignition, Time, Event optional. Each channel can be set separately. The sub-stream andmirror record are the sameAudio: Enable the audio. Note: Audio cannot be record separately

36-70

I frame: Enable to let the frame rate invalid, record file that does not have alarm is I frame only.Alarm quality: The alarm image is different from the normal recording image.Encode mode: It supports VBR and CBR modes. Record- Dual stream

Storage: The storage type for sub stream, internal SD and external SD optional.Record mode: Mirror record, alarm back-up record and sub stream. Mirror record: Channel is selectable. Video resolution and frame rate are the same with main

stream. Alarm backup: Channel is selectable. The parameters are the same with main stream Sub stream: Channel is selectable. Recording parameters are configurable

Sub stream includes channel number, enable or not, audio, resolution, frame rate and image quality.

37-70

Sub stream channel: It is selectable according to recording mode. Record-->OSD

Embedded key information to video file for easily check when playback.

2.6.3. IPC SETUP

IPC setup:

38-70

Channel: It includes the analog channels and IPC channels. Analog channel will not be shown if itconnects to network camera.Enable: Enable to operate IPC.IP and port: Display channel details after searching.Setup: Search and edit IP camera recording parametersFast setup: Search all the IP cameras in LAN network, and auto assign IP address to IP camera.IPC local address: To search network camera of local area network at Intranet. The default one is10.100.100.1.

39-70

2.6.4. PTZ

Channel: It includes analog channels and IPC channels.Enable: Enable PTZ.Operate: It includes serial, N9M and ONVIF. It supports Pelco-D and Pelco-P PTZ protocols with serialmode.Address: It is valid with serial mode.Test: It is to test PTZ is available or not. Click it to pop up PTZ control panel.

2.7. DATA COLLECTION

2.7.1. GENERAL

General-->Sensor

40-70

Sensor number: The total alarm input numbers of MDVR.Sensor name: IO sensor name, it can set manually. The sensor name of alarm setting interface willupdate synchronously after setting.OSD name: The information embedded to video image.Copy: Copy the configuration and use it for other sensors. General-->Serial port:

RS232-1 and RS232-2, with the following features: three axis sensor, expansion, 485 bus and GPSdata.RS485-1 and RS485-2, with the following features: PTZ, control panel, 485 bus and GPS data.Baud Rate: 2400-115200, 9 classes optional.Remarks:

41-70

General-->speed

Unit: KM/H and MPH selectable.Source: GPS, pulse or both optional.Calibration mode: No need to calibrate if setup as satellite mode.

2.7.2. SNAP SETTING

Snap Setting-->Time snap

Some models have equip 4 serial ports, while model MDAH1401 and MDAH2401 equip only oneRS232 port, but it can realize the following features: expansion, control panel, 485 bus, GPS data,three axis sensor, PTZand integrated printer.

42-70

Start time: Start to snap.End time: Stop snapping.Setup: Delete and set.Time snap: Enable to snap at the setting time.Add: To add snap period, and it supports 8 pieces at most. Snap Setting--> Trigger snap

43-70

Trigger snap: It snaps when alarm is trigger.

2.7.3. ECO-DRIVING (It is still developing.)

44-70

2.8. ALARM

2.8.1. BASE

Base-->Speed alarm

45-70

Name: The current name is over speedEnable：Enable or disable, tick to enableAlarm type: It includes the following types, important and general.Trigger:

Over speed pre alarm difference: To set the pre alarm data. For example, if speed is 60 km/hour, andover speed pre alarm difference is 10 km/hour, TSS sends over speed alarm broadcast and recordswhen it reaches 50 km/h.Speed: It is the alarm speed.Alarm duration: Alarm output durationLinkage: When alarm triggered, link to other business operation.

46-70

Channel: Link to recording channel, optional.Post recording: It means the recording duration after the alarm has been removed.Lock: Enable to link recording lock when there is alarm.3G network: When it is set as sensor trigger dial mode, it enables 3G network as it triggers alarm.Linkage IO output: Enable to link alarm output when alarm is triggered.Output delay time: It means the alarm output duration after alarm is removed.Alarm upload: Enable to upload to platform.Linkage screen: Enable to link the channel to show full image when there is alarm. ( Depends on theMDVR model, display split 1/4/9 optional.)PB alarm duration: It means the available alarm duration after urgent alarm is removed.Alarm snap: Enable to link snap.

Base- Panic alarm:

47-70

Name: The current name is panic.Enable：Enable to panic button.Alarm type: Important type and general type optional.Trigger: Click any button to delay the time till it reaches the setting time to alarm.

Linkage: When alarm is triggered, link to business operation.

48-70

Channel: Link to recording channel, optional.Post recording: It means the recording duration after the alarm has been removed.Lock: Enable to link recording lock when there is alarm.3G network: When it is set as sensor trigger dial mode, it enables 3G network as it triggers alarm.Linkage IO output: Enable to link alarm output when alarm is triggered.Output delay time: It means the alarm output duration after alarm is removed.Alarm upload: Enable to upload to platform.Linkage screen: Enable to link the channel to show full image when there is alarm. (Depends on theMDVR model, display split 1/4/9 optional.)PB alarm duration: It means the available alarm duration after urgent alarm is removed.Alarm snap: Enable to link snap.

49-70

Base – IO alarm interface:

Name: From Sensor1 to Sensor8 (It includes all the alarm input numbers.)Enable: Enable the sensor alarm.Alarm type: Important type and general type optional.Trigger: Low and high optional. It triggers alarm when it is low as default.


50-70


51-70

2.8.2. VIDEO

Video-Video loss

Name: The default name is video loss.Enable: Enable the video loss.Alarm type: Important type and general type optional.Trigger:

52-70

Video loss set: It includes all video channels that can be selected.Set period: Set the checking period when video loss alarm is triggered.Linkage: When alarm is triggered, link to business operation.

53-70


54-70

2.8.3. ADVANCE

Name: The default name is ACC alarm.Enable: Enable the ACC alarm.Trigger: Set the threshold value of X/Y/Z.


55-70

Channel: Link to recording channel, optional.Post recording: It means the recording duration after the alarm has been removed.Lock: Enable to link recording lock when there is alarm.3G network: When it is set as sensor trigger dial mode, it enables 3G network as it triggers alarm.Linkage IO output: Enable to link alarm output when alarm is triggered.Output delay time: It means the alarm output duration after alarm is removed.Alarm upload: Enable to upload to platform.Linkage screen: Enable to link the channel to show full image when there is alarm. (Depends on theMDVR model, display split 1/4/9 optional.)PB alarm duration: It means the available alarm duration after urgent alarm is removed.Alarm snap: Enable to link snap.X:0.0, Y:0.0, Z:0.0: The real time acceleration information.

2.9. MAINTENANCE

56-70

After login, click setup>Maintenance, and then enter into the page as follow.

2.9.1. CONFIGURATION

In the configuration page, user can export and import the configuration file.

Insert flash drive to export the configuration file to the root folder, the file name is ConfigFileInsert flash drive to import configuration file into MDVR, and it will display the notice when importsuccessfully.Remark:It won’t import the register info and speed adaption info.

2.9.2. DATA EXPORT

User can export any file.File type: GPS data file, vehicle info file, ACC info file, Can info file, Dial info file and Captured pic.

57-70

2.9.3. UPGRADE

In the page of upgrade, user can upgrade software.

Put the upgrade file in flash drive. Currently, device firmware, microcontrollers firmware, CPT-7 firmware and IPC firmware can be put inside.Insert flash drive and enter the upgrade interface, click software upgrade and it will indicate that upgrade file is importing.MDVR reboot up and enter into upgrade interface after importing successfully.

58-70

Remark:1) Make sure don’t power off during upgrading.2) Put the upgrade file into the folder “upgrade”, which is at the root directory if the USB drive3) It support upgrade firmware, LOGO, MCU, and MCU for CPT-7.4) Firmware and MCU will package in one file, and it will upgrade MCU first, and then

firmware.5) The name of the LOGO are: logo_update(10.12.15).jpg and logo_cvbs(11.12.15).jpg6) Please don’t put many files in the same folder when it is upgrading, otherwise, it will

upgrade one randomly.

2.9.4. STORAGE

In this page, user can format all the storage.

Storage type: HDD, SD card (Internal), SD card (External), USB drive

Free/Total

Not exist: Didn’t find the HDD (not install or broken)

Unformatted: Means the HDD has been detected, but unformatted.(New HDD)

Capacity info: Display the correct info means HDD working fine

Format:

Click format and it will refresh the current formatted volume information after formatting successfully.

It can record after formatting successfully and no need to reboot up.

59-70

2.9.5. DEFAULT

In this page, you can click the default button to reset the parameters to factory settings.

Click reset to restore the original data.Remark:For, language, MAC address, register info, CMS server info, speed adaption parameter will not changeduring default settings.

3.WEB MANAGEMENT

3.1. LOGIN INTERFACE1) Connect MDVR into local area network, set relevant information to make sure the computer canvisit the MDVR.2) Open browser and input http:// IP address of MDVR. It will go to the WEB login interfaceof MDVR. And the default IP address is 192.168.1.1003) Interface will pop up a window to install N9M activex, click install.4) Refresh the web page, enter default user name admin/admin to log in.

60-70

3.2. MAIN INTERFACE

61-70

Icons: quad, 9-split, preview, next page, sound, capture and video parameters.

Stream switch: main stream, sub-stream and network transmission sub stream.

Log out: log out and come to the log in interface

3.3. PLAYBACK

62-70

If the date is marked as color green, it means there is recording.

63-70

Recording playback window: Video window, play time-line, play control button, window switch...

Record list: It displays all the record. Click backup download video file to local computer hard disk.

3.4. MAINTENANCE

64-70

3.4.1. BASIC INFORMATION

Basic information: It contains the current state & history state of channel video and storage.

3.4.2. DEVICE MODULE

Device module: It is about the current state of module, WIFI module and satellite location module.

65-70

3.4.3. STORAGE DEVICE

Storage device: There are the volume information & format operation of storage (hard disk/flashdrive/SD card), and the path of snap & record backup.

66-70

3.4.4.VERSION INFORMATION

Version information: There are device type, name, firmware version, MCU version, CPT-7 version, upgrade, configuration file export and configuration file import.

Log

Log: There is Log type (operation log, alarm log and locked log), operation type (IO alarm, panel alarm,speed alarm, video loss and ACC alarm) date, and log export.

3.5. CONFIGURATION

67-70

The parameter setting is the same as the local setting. User can view the operation at the local setting.

68-70

4.STORAGE CAPACITY CALCULATION

1) Image Quality & Streams

Resolution Imagequality

1 2 3 4 5 6 7 8

StreamKbps

720P 6144 4800 4128 3456 2784 2112 1440 768WD1 2662 1997 1599 1331 1170 1040 936 832WHD1 1664 1248 998 832 728 650 585 520WCIF 1040 780 624 520 455 405 364 325D1 2048 1536 1230 1024 900 800 720 640HD1 1280 960 768 640 560 500 450 400CIF 800 600 480 400 350 312 280 250

2) Record File Size Calculation

Rec. file size for each channel is:

Recording time (s) x Stream (Kbps) / 8 / 1024 = File Size (MB)

e.g. The file size of the Image 1 with D1 resolution within 1 hour:

3600 x 2048 Kbps / 8 / 1024 = 900 MB

3) Image Quality & Resolution

ResolutionImagequality

1 2 3 4 5 6 7 8

Record(MB)

720P 2700 2109 1814 1518 1223 928 632 337WD1 1170 878 702 585 514 456 411 365WHD1 731 549 438 365 320 285 257 229WCIF 456 343 274 229 199 178 160 143D1 900 675 540 450 395 351 316 281HD1 562 422 337 281 246 219 198 176CIF 351 264 211 176 153 137 123 110

69-70

5.FAQ1) The system can’t start?

Usually this problem results from the incorrect power connection. Please follow below steps tocheck the power connection:1. Check the input power, whether the power wire is connected correctly, whether the ground wire is

connected back to the battery, and whether the fuse on the power wire is in good condition.2. Check whether the ACC signal wire input to the power is with voltage higher than 7 V.3. Check whether the device key is closed.2) The MDVR restarts uninterruptedly?

Please follow below steps to check it:1. Check whether the voltage of MDVR is insufficient. If the voltage is less than the start-up voltage of

the device, the device would always restart.2. The problem in hard disk/SD card may cause the failure to start. Take off the storage part and check

whether it is broken down.3) The device can’t record?

Usually this problem results from the storage disk or camera. Please follow below steps to check it:1. Check whether the storage disk is installed, whether it is in good contact, and whether the disk can

be read normally in computer.2. Check whether the storage disk is formatted. The storage disk should be formatted before normally

storing record files.3. Check whether there is video signal input into the device from camera, and whether there is

video/image on the screen.4) There is no voice in record file?

Please follow below steps to check it:1. Check whether there is an external pickup, or whether the camera features with the function of

audio collection.2. Access to Video Channel Settings, check if Audio is set on.3. There must be video input into the channel for recording and it must record normally.5) The GPS works abnormally?

Please follow below steps to check it:1. Check whether the GPS antenna is installed correctly. There is a silk print logo on the GPS antenna

holder behind the host device.2. Check whether the antenna receiver is sheltered. It should not be covered by any stuff, which may

cause it not to receive signals.3. Environmental influence such as tree shades, being inside tunnel, driving near tall building or

elevated roads, thunderstorms or other weather influence, etc. can also cause signal loss orreceiving wrong signals.

6) The device can’t shutdown in ignition switch mode?Please follow below steps to check it:

1. Check if the ACC line connection mode is correct; and check whether there is voltage on ACCyellow line when the key is turned off.

2. If the device has been set with schedule recording, it can’t shutdown if it is still during recording time

70-70

of the task table.7) Which IP waterproof level does MDHB device support?

Currently, some models support waterproof IP 54.8) How to install the WIFI antenna?

The antenna must be installed on unobstructed place of the roof, and be fixed with glue.9) The device cannot be shut down when in ignition ON/OFF mode.

Check if the ACC signal wiring is correct and if there is voltage for ACC signal line after the key isturned off .If you have set timing recording, and at the current time it is still in task recording, the device may beimpossible to be shut down.

10) GPS anomaly.Check if the GPS antenna is properly installed. There is silkscreen GPS identification on the GPSantenna pedestal on the back of the MDVR device. Check if the antenna connector is blocked andmake sure the antenna connector not be covered by other things.Trees block, being inside the tunnel, driving near tall buildings or viaduct, thunderstorms and otherenvironmental effects may also cause to receive no GPS signal or error signal.

11) No voice in video files.See if there is an external microphone, or if the camera cannot capture audio;Enter into the video channel settings, then check if the audio is open;Ensure video input and normal recording, on which the audio recording channels must be based.

12) The device doesn’t record.Make sure the storage part is installed and of fine contact, the data can be read on PC, and thestorage device is not formatted.Check if there are video signal input to the main device, and whether there are video images in thechannel pictures.

13) Why has the MDVR device always been in a state of restart?Check whether the MDVR device voltage is insufficient. If the device voltage does not reach thestart voltage, the device will restart.Hard disk or SD card may cause the MDVR device unable to start. You need to remove the storagedevice and then boot up to verify whether it is caused by the storage device.

14) Why the MDVR device cannot start?Check the device input power to see if the power wiring is correct, if there is ground wire connectedback to the battery, and if the fuse of the power wire is n good condition;Check whether there is voltage(more than 7V) on power input ACC signal wire;Check whether the hard disk key is turned off.

15) What is the log in user name and password for new device?The default user name and password are both “admin”. The device password can be set as empty.

16) How to update the firmware?Change the previous file folder name “dvrupgrade” to “upgrade”. Change the file nameFWX15-0401-05-01-V01V01V01V491087 to RMMDVR_X5_III_T2014111005_convert

17) In the ON/OFF of basic settings, the low voltage protection is 8V, why?After testing, when the battery is lower than 8V, the voltage will lower down quickly. Therefore thelowest voltage is set to be 8V. When it is lower than 8V, the MDVR device will recognize it asexternal power-off and then enter into shutdown state.

mdhb3204 - user manualdownloads.iotsmartsolutions.net/products/mobile... · mdhb3204 is a...

Documents