mcr welding glovespersonal protection equipment (ppe) · 2019. 6. 21. · mcr 324 welding ppe...
TRANSCRIPT
MCR
324
WELDING
PPE
Respiratory
Helmets
WELDING GLOVESPersonal Protection Equipment (PPE)
2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.
4152
Ladies Welder’s Gloves• Manufactured from select shoulder leather• One-piece leather back with turned hems• Fully welted• Full sock lining sewn in at all finger tips• Gunn pattern
4152 Gray Leather Welder’s Ladies. . . . . . . . . . . . . . . . . . 6.35 PR
Mustang™ Mig/Tig Welder’s Gloves• Premium grade top grain cowhide palm• Split leather gauntlet cuff• Kevlar® thread
4950 L Mig/Tig Welder’s Gloves with 4½” Cuff S–L . . . . . . . . . . . . . . . 17.38 PR 4950 XL Mig/Tig Welder’s Gloves with 4½” Cuff XL . . . . . . . . . . . . . . . 18.18 PR
4950
Premium Welder’s Gloves• Select heavy side leather • Limited flammability sleeve and a full sock lining sewn in at all finger tips• Fully welted to reinforce all critical wear areas• Turned leather hem• Extra large die-cut• Sewn with super strong, heat-resistant DuPont® Kevlar® thread
4600 Blue Welder’s Gloves, Leather Reinforced Thumb and Palm . . . . . . . 15.16 PR
Russet Welder’s Gloves Y1902MG Russet Welder’s Gloves . . . . . . . . . . 7.06 PR
Y1902MG
4600
Gunn Pattern Mig/Tig Welder’sGrain goatskin welder with split cow gauntlet cuffs
4850 L Mig/Tig Welder’s, Gunn Pattern, Gauntlet Cuffs, Kevlar® Thread M-L . . . . . . . 9.86 PR 4850 XL Mig/Tig Welder’s, Gunn Pattern, Gauntlet Cuffs, Kevlar® Thread XL . . . . . . . 10.45 PR
4850
BLACK STALLION
ALLEGRO
WELDING
PPE
Respiratory
Helmets
3252018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.
Personal Protection Equipment (PPE)
Full Leather Welder’s Gloves• Heavy-weight• One-piece back with wing thumb• Lined• Welted seams
7271HK Economy Gray Full Leather Welder’s Gloves . . . . . . . 5.39 PR
7271HK
FR Nomex® Lined Elkskin Premium Stick Welding Gloves• High-performance stick welding gloves• Nomex® lined back• Premium grain Elkskin• Reinforcements• Kevlar® stitched
850 RV XL Lined Elkskin Stick Welding Gloves S–2X . . . . . . . . . 28.85 PR 850
GX5015 Mechanic’s Gloves• Premium grain goatskin palm provides durable protection with natural heat-resistance,
while maintaining the dexterity needed for precision tool work or equipment operation• Flame-resistant Cotton back provides a snug, yet flexible, fit• Flame-resistant fleece lining for added protection, without compromising grip or
hand control• Goatskin reinforcement on palm and all fingertips• Strap cuff with flame-resistant hook & loop closure• Kevlar® flame-resistant stitching throughout• NFPA 70E compliant; ARC 3 (ATPV 30 cal/cm2)
GX5015 2X Mechanic’s Gloves S–2X . . . . . . . . . . . . . . . . . . 25.39 EA GX5015
Leather Knee Pads • Tough abrasion-resistant leather for maximum protection and soft
cushion back for comfort• Elastic straps with hook and loop closures ensure a secure fit• Because of its resistance to heat and fire this is ideal for welders or any
construction application such as concrete work
6991 Leather Knee Pads . . . . . . . . . . . . . . . . . . . . . . . . . . 18.11 PR
6991
NSA
BLACK STALLION
Personal Protection Equipment (PPE)
326
WELDING
PPE
Respiratory
Helmets
2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.
Carbon Armour™ Jacket• Excellent comfort and durable protection• Exceptional tensile and tear strength• Featuring the latest Carbon Fabric Technology• FR Fabric will NOT melt, drip, or ignite• High resistance to pin holes• Inherently Flame Resistant for FR protection that will NOT wash out• Lightweight fabric offers superior protection against burns caused by
sparks and/or welding spatter• Moisture Wicking with unsurpassed breathability• Arc Rating: 9.4 cal/cm²
C07H2GCBG_ _30 Carbon Armour™ Jacket S–4X. . . . . . . . . . . . . . . . . . . . Call
®
C07H2GCBG_ _30
BSX® FR Cotton Welding Jacket• 9 oz. flame-resistant Cotton BSX®• Welder’s collar• Adjustable cuff and waist straps• Extended length coverage• Dual inside and scribe pockets
BX9C XL FR Cotton Welding Jacket S–XL . . . . . . . . . . 30.85 EA BX9C 2X FR Cotton Welding Jacket 2X . . . . . . . . . . . 33.94 EA BX9C 3X FR Cotton Welding Jacket 3X . . . . . . . . . . . 37.02 EA BX9C 4X FR Cotton Welding Jacket 4X . . . . . . . . . . . 43.19 EA BX9C 5X FR Cotton Welding Jacket 5X . . . . . . . . . . . 46.28 EA
TruGuard™ 200 FR Cotton Welding Jacket, Reflective Stripes–30”• 9 oz. flame-resistant Cotton• Inside pocket and scribe pocket• Snap front and wrists and stand up collar• 2” FR reflective tape• Pass-through for fall harness
JF1012-OR XL FR Cotton Welding Jacket w/Stripes S–XL . . . . . . . . . 53.24 EA JF1012-OR 2X FR Cotton Welding Jacket w/Stripes 2X . . . . . . . . . . 58.57 EA JF1012-OR 3X FR Cotton Welding Jacket w/Stripes 3X . . . . . . . . . . 63.88 EA JF1012-OR 4X FR Cotton Welding Jacket w/Stripes 4X . . . . . . . . . . 74.53 EA JF1012-OR 5X FR Cotton Welding Jacket w/Stripes 5X . . . . . . . . . . 79.86 EA
BX9C
JF1012-OR
TruGuard™ 250 Class 3 FR Cotton Welding Jacket, Reflective Stripes–32”• FR-treated 100% Cotton provides protection from heat and spark• Inside pocket and scribe pocket• Concealed snap fasteners • Stand up collar• 2” FR reflective tape• Access slot on back for fall protection harness• ATPV 8.2 cal/cm2• ANSI/ISEA 107-2015 certified• NFPA 70E and ASTM 1506 compliant
JF1117 XL Class 3 FR Cotton Welding Jacket, Hi-Vis Yellow S–XL . . . . . . . . 100.10 EA
ADDYOURLOGO
JF1117
Also see pages 276 fornew hi-viz ANSI rules
See page 296 for FR ANSI/ISEA 107-2015 rule info
R 3ANSI 107TYPE CLASS
GATEWAY
3M
BLACK STALLION
Personal Protection Equipment (PPE)WELDING
PPE
Respiratory
Helmets
3272018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.
FlakFinger™ Welding Heat Shield• Leather strap keeps the FlakFinger™ secured throughout your weld• Unique design allows for single-finger or two-finger protection• Reinforced “tail” extends heat protection through length of hand• Convenient adjustable sleeve and strap system provides a customized fit• Versatile “tail” can be positioned to provide either side hand or back
of hand protection• Great for TIG welding aluminum, stainless steel, pipe, and more• Also fits MIG and Stick gloves for propping, sliding, and shielding
AT2010-WG FlakFinger™ Welding Heat Shield . . . . . . . . . . . . . . . . 15.38 EA
AT2010-WG
SmashPad™ FR Welding Mat• Helps to alleviate aches and pains associated with kneeling,
sitting, leaning, and more during long welding runs• Foam cushioning provides supportive comfort• Inherently flame-resistant fiberglass outer shell resists sparks• Red 30 oz. silicone-coated fiberglass top surface is twice as thick for extra
protection against sparks and spatter, with greater tear and abrasion-resistance• Convenient carry handle and FR hook & loop closures • 16” wide x 19” long (16” x 9½” when folded)• Easy to clean—Simply wipe off dirt and grime and dry• Connect two or more to extend padded surface
AP3015-RG SmashPad™ FR Welding Mat . . . . . . . . . . . . . . . . . . . . 58.15 EA
AP3015-RG
1710 Welding Goggle• Classic, soft frame welding goggle series that provides optimal view of
the work area• Soft, vinyl frame includes a large venting hood that minimizes fogging• Designed to fit over most spectacles and accommodate magnifying lenses
Lens Shade 1710U50 Lift Front, 2” x 4¼” Goggle 5 . . . . . . . . . . . . . . . . . 8.28 PR
1710U50
3M™ Peltor™ Welding Earmuff H505B• Lightweight, low-profile design allows the earmuff to fit nicely under
3M™ Speedglas™ 9100 Series and other welding helmets• Soft ear cushions provide a comfortable seal and help reduce loud
noise exposure• Semi-soft cup surface minimizes scratch sound transmission• Two-point suspension and wire headband with individual spring action
helps facilitate constant, even pressure distribution on the earmuffcushions for a secure, comfortable fit
H505B Peltor™ Welding Earmuff, NRR 17 . . . . . . . . . . . . . . 29.25 EA H505B
*Research suggests that many users will receive less noise reduction than indicated by the NRR due to variation in earplug fit and wearing time. It is recommended that the NRR be reduced by 50% for estimating the average amount of noise reduction provided.
3M, See Warning on Page 89
Wise Safety ConductsOSHA Welding
Regulations TrainingSee pages 648–665 for full
OSHA Training Course Catalog
MOLDEX
3M
328
WELDING
PPE
Respiratory
Helmets
RESPIRATORY
2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.
3M™ Particulate Welding Respirator 8515, N95• Provides comfortable worker protection for applications such as welding, soldering,
and sanding • Patented 3M™ Cool Flow™ Exhalation Valve is a one-way valve for easy exhalation
and cooler comfort• M-noseclip adjusts easily for fewer pressure points, reduces potential for eyewear
fogging, and helps provides a custom and secure seal • 3M™ Welding Web: flame-resistant as demonstrated per modified ASTM D2859-96
(not a substitute for a faceshield) • Lightweight all filter design with braided headbands
8515 Particulate Welding Respirator, N95 10 ea/bx . . . . . . . . . . 34.39 BX
3M, See Warnings on Pages 106 and 331
3M™ Particulate Respirators 8214 and 8514, N95• 8214 and 8514 N95 particulate respirators are designed for applications such as
welding, soldering, and other operations involving metal fumes including those with ozone* and nuisance levels** of organic vapors
• Suitable for welding on galvanized and stainless steel• Proprietary 3M™ Cool Flow™ Exhalation Valve is a one-way valve for cool dry comfort• Lightweight cake-resistant layer reduces caking of particles on respirator surface to
help make respirator last longer• 3M™ Welding Web: flame-resistant as demonstrated per ASTM D2859-96 (not a
substitute for a faceshield)• All filter design for economical protection with no spare parts to maintain• Adjustable noseclip and fully adjustable straps• 8214 has comfortable foam faceseal; 8514 has soft, adjustable foam noseclip
8214 Particulate Respirator, N95 10 ea/bx . . . . . . . . . . . . . . . . . 89.26 BX 8514 Particulate Respirator, N95 10 ea/bx . . . . . . . . . . . . . . . . . 79.29 BX
* 3M recommended for ozone protection up to 10 times the OSHA PEL, or applicable exposure limit, whichever is lower. Not NIOSH approved for ozone.
** 3M recommended for relief against nuisance levels of organic vapors. Nuisance levels refers to concentrations not exceeding OSHA PEL or applicable government exposure limits, whichever is lower.
2310N99
Premium N99 Particulate Respirator for Welding Applications• Exhalation valve reduces hot-air build-up • Can be used against most welding fumes• Collapse-resistant Dura-Mesh® shell lasts longer so workers use fewer masks • Contour molded nosebridge • Soft nose cushion fits easily and comfortably without a metal noseband • Certified under NIOSH 42CFR84 to have filter efficiency level of 99% or
greater against particulate aerosols free of oil • Meets heat-and flame-resistance in accordance with ANSI/ISEA 110-2003 Section 7.11.1
2310N99 N99 Particulate Respirator 10 ea/bx, 6 bx/cs . . . . . . . . . . 46.08 BX 2315N99 N99 Particulate Respirator With Adjustable Straps 10 ea/bx, 6 bx/cs . . . . . . . . . . 53.47 BX
8214
8515
Free Safety Info all in One Place• Safety Training Videos• Safety Blog• EHS Webinars• Articles & White Papers• Infographics• Tools & Software
Your ResourceCenter for Industrial
Safety Topicswww.safeopediacom
HONEYWELL NORTH
WELDING
PPE
Respiratory
Helmets
329
RESPIRATORY
2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.
7600 Full Facepiece Respirators• Provides eye, face and respiratory protection with optimum comfort and
a 200° field of vision • Covers the worker’s entire face and has a chin cup, speaking diaphragm,
five-strap head harness and two facepiece sizes• Can be adapted to PAPR or Supplied Air to offer flexibility in the workplace• NIOSH approved with North Series Chemical Cartridges and/or filters
Respirators must be used according to NIOSH/OSHA regulations
760008AW 7600 Full Face w/Welding Attachment . . . . . . . . . . . . . . . . . . 388.57 EA 80849-H5 Replacement Lens, 5/pk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88.25 EA 80836A Peel-Away Windows for all Full Facepieces, . . . . . . . . . . . . . . . 27.48 PK
(3) Peel-off Windows/Assembly, (5) Assemblies/pk
760008AW
Low Profile P100 Particulate Filter • A new dimension to high efficiency filtration • Meets NIOSH class P100 requirements by having a minimum efficiency of 99.97%
against any dust, mist, or fume, oil or non-oil based • Unique seal check easily verifies facepiece to faceseal • Its low profile and flexibility allows the filter to fit under face gear such as
welding helmets • Lightweight improves comfort and reduces worker fatigue • Attachable as a pre-filter to all North chemical cartridges except Defender™
75FFP100 Low Profile Filter Class P100 2 pk, 50 pk/cs . . . . . . . . . . 369.46 CS
Shroud for Welding Attachment• Shroud, flame-resistant fabric for welding, fits all full facepieces
8419 FR Shroud for Welding Attachment . . . . . . . . . . . . . 65.50 EA
8419
75FFP100
KIMBERLY CLARK / JACKSON SAFETY
BULLARD
330
WELDING
PPE
Respiratory
Helmets
WELDING HELMETS
2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.
SparxLift Welding Helmet • Continuously variable sensitivity adjustment• Continuous variable delay adjustment reduces flicker and “tired eye” effect• Radio frequency (RF) detection switch for ultra low-amp TIG or shielded welders• Glove friendly controls• Polycarbonate grinding lens• AutoLift patented design converts welding helmet to grinding helmet with
the push of a button• Engineered Nylon makes the helmet tough, lightweight, and heat-resistant• Available as a helmet or as a PAPR or Supplied Air Respirator
LENS• Brilliant Clear X-View LCD technology with optically
correct UV and IR filters provide beautifully clear viewing performance without disturbance
• Slide cartridge design• Supplemental solar power• ADF darkens in 1/25,000 second• Dual UV/IR sensors with Inner Sensor Technology• Rapid Connect cable system
PAPR Assemblies & Helmets EVASL1 EVA PAPR, SparxLift Helmet, 25 APF Shroud . . . . . . . . . . . . . . . . . . . . 2,141.74 EA
Includes: Blower, Battery, Breathing Tube, Belt, Air Flow Indicator, Charger, HEPA filter, Nomex Cover with Spark Arrest, 25 APF shroud, (1) spare grinding lens, (3) spare outer lenses, (2) spare inner lenses
EVASL2 EVA PAPR, SparxLift Helmet, 1000 APF Shroud. . . . . . . . . . . . . . . . . . 2,141.74 EA Includes: Blower, Battery, Breathing Tube, Belt, Air Flow Indicator, Charger, HEPA filter, Nomex Cover with Spark Arrest, 1000 APF shroud, (1) spare grinding lens, (3) spare outer lenses, (2) spare inner lenses
SLH SparxLift Helmet Assembly (Shroud not included) . . . . . . . . . . . . . . . . 472.02 EA
More configurations available, call for details.
A complete EVA PAPR system consists of three components:–EVA blower assembly with filter
(see page 142 for details)–Respirator hood or loose-fitting
facepiece with suspension–Breathing tube assembly
SparxLift
EVAHL Powered Air Purifier Respirator• Combining the cutting-edge technology and ergonomic design of the EVA, the EVAHL Powered
Air-Purifying Respirator (PAPR) offers workers greater protection in Hazardous Locations• All the great EVA features now HazLoc rated• For Class I, Division 2, Groups A, B, C, D T6 (Gases and Vapors)• Class II, Division 2, Groups F, G (Dusts)• Class III (Fibers or Flyings)
EVAHL2 EVAHL PAPR Assembly . . . . . . . . . 1,453.18 EA Requires: breathing tube, hood top and filter cartridge to be compete system, depending on the hazard.
EVAHL
W40 NITRO* ADF Welding Helmet• Enables welders to adapt to the vast working environments • Ability to control the shade of the lens and adjustments for
sensitivity from ambient lighting sources• Color: Blue
21931 W40 Nitro ADF Welding Helmet . . . . . . . . . . 183.67 EA
21931
See page 142 for moreon EVA/EVAHL PAPR
3M
WELDING
PPE
Respiratory
Helmets
331
WELDING HELMETS
2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.
This product is designed to help protect the wearer‘s eyes and face from harmful radiation including visible light, ultra-violet radiation (UV), infra-red radiation (IR), sparks and spatter resulting from welding processes. These products must be used only by qualified persons who are properly trained in their use and maintenance. Misuse may result in permanent eye injury and vision loss. Always wear ANSI Z87.1 compliant safety spectacles in addition to any welding helmet. For proper use, see supervisor, or User Instructions or call 3M in U.S.A.1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.
WARNING!
3M™ Speedglas™ Welding Helmet Series 9100 QR (Quick Release)• Can be used work at altitudes from sea level up to approx. 10,000 ft (3000 meters) with
the HE filter and up to approx. 5,000 ft (1500 meters) when using the OV/AG cartridge• The new technology in the high altitude model compensates for air flow discrepancies
caused by the change in air density at increased elevations• By incorporating the 3M™ Speedglas™ Welding Helmet 9100 MP, (multi-protection), the
Adflo® PAPR system has been brought to a new level, offering five levels of integratedwelder protection: head, eye, face, respiratory, and hearing (optional) combined into one comfortable system
• Based on the need to increase the fan speed at increased elevations to maintain the minimum design airflow, users of the new Adflo high altitude turbo assembly may experience a slight reduction in overall run-time
• Shades 5, 8–13
06-0100-10QR Welding Helmet 9100 QR, w/Auto-Darkening Filter . . . . . . . . . 571.63 EA 9100V (1.8” x 3.7”, 2800 hours) and Hard Hat H-701R
06-0100-20QR Welding Helmet 9100 QR, w/Auto-Darkening Filter . . . . . . . . . 624.37 EA 9100X (2.13” x 4.09”, 2500 hours) and Hard Hat H-701R
06-0100-30QR Welding Helmet 9100 QR, w/Auto-Darkening Filter . . . . . . . . . 740.37 EA 9100XX (2.8” x 4.2”, 2000 hours) and Hard Hat H-701R
06-0000-30i-KIT Welding Filter Kit 9100XXi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 671.38 EA Welding Cap, Carry Bag, and Starter Kit Included
06-0100-10QR
3M™ Complete Welding Helmet Systems, with 3M™ Speedglas™ Welding Filter Kit 9100XXi• Helps provide professional-grade eye and face protection
from debris and harmful radiation while offering better visibility• Improved optics allow welders to see more realistic colors• The 9100XXi silver front panel houses external controls, enabling
fast and easy access to the grinding and memory modes• Two memory modes that allow welders to set individual settings for
dark shade, light-to-dark switching sensitivity, and dark-to-light delay• Grab and go with auto-on allows welders to work quickly• External grinding mode activation• An improved user interface that is easy to understand• Speedglas lens features user-selectable dark shades from shades 5, 8, 9
through 13, and a light shade of 3• Viewing area of 2.8” x 4.2” provides the largest viewing area available
in the 9100 Series helmets• Exhaust vents readily direct your exhaled air out of the helmet, helping
to reduce heat, humidity and fogging of the welding filter• Battery life (two Cr2030 3V lithium batteries) is approx. 2,000 hours• Meets ANSI Z87.1-2010 impact standard
35-1101-30iSW Speedglas™ Welding Helmet 9100-Air, . . . . . . . . . . . . . . . . . . 2,407.84 EA w/Welding Filter Kit and Adflo™ PAPR
25-5702-30iSW Speedglas™ Welding Helmet 9100-Air, w/Welding . . . . . . 1,705.87 EA Filter Kit, Versaflo™ Supplied Air Regulator V-100
06-0000-30i-KIT Welding Filter Kit 9100XXi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 671.38 EA Welding Cap, Carry Bag, and Starter Kit Included
25-5702-30iSW
06-0000-30i-KITWelding Filter Kit
9100XXi
3M
332
WELDING
PPE
Respiratory
Helmets
WELDING HELMETS
2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.
27-5902-20SW
27-5702-20SW
3M™ Speedglas™ Welding Helmet 9100 MPfor use when an ANSI approved hard hat is required• The 3M™ Adflo™ Powered Air Purifying Respirator (PAPR) and 3M™ Speedglas™
Welding Helmet 9100 MP with auto-darkening filter offers the welder compact,lightweight respiratory protection and quality filter optics all-in-one
• Lithium ion battery, high efficiency particulate filter, and wide leather belt• Audible and visual alarms signal low airflow and low battery charge• The high efficiency particulate filter can be “stacked” onto an optional 3M™ Adflo™
Cartridge (not included) for additional protection against OV/SD/CL/HC vapors• Flip-up assembly for grinding and prep work• Side windows – Shade 5 side filters that increase peripheral vision• Ergonomic, adjustable head suspension for increased comfort, helmet stability and
weight distribution• 3M™ Speedglas™ Auto-Darkening Filter 9100XX with 2.8” x 4.2” viewing area (approx)• Selectable Shades 5, 8–13 and Shade 3 light state• Grinding and Tack modes• For use with all Stick, MIG, and TIG welding processes• Five-position sensitivity control• Adjustable recovery delay• Offers Assigned Protection Factor (APF) of 25 when used as a NIOSH-approved system• NIOSH-approved system; meets ANSI Z87.1-2010, high impact• Meets ANSI Z89.1–2009 requirements for Type 1 Class G hard hats
37-1101-20SW 3M™ Speedglas™ Welding Helmet 9100 MP w/3M™ Adflo™ PAPR, HE filter and 3M™ Speedglas™ Welding Filter 9100X. . . . . . . . 2,759.18 EA
37-1101-30SW 3M™ Speedglas™ Welding Helmet 9100 MP w/3M™ Adflo™ PAPR, HE filter and 3M™ Speedglas™ Welding Filter 9100XX. . . . . . . 2,885.39 EA
27-5702-20SW 3M™ Speedglas™ Welding Helmet 9100 MP w/3M™ Speedglas™ Fresh-Air III Supplied Air Regulator, V-100 Cooling Valve and 3M™ Speedglas Welding Filter 9100X. . . . . . . . . . . . . . . . . . 1,914.42 EA
27-5902-20SW 3M™ Speedglas™ Welding Helmet 9100 MP w/3M™ Speedglas™ Fresh-Air III Supplied Air Regulator, V-300 Air-Regulating Valve and 3M™ Speedglas™ Welding Filter 9100X . . . . . . . . . . 1,667.52 EA
27-5902-30SW 3M™ Speedglas™ Welding Helmet 9100 MP w/3M™ Speedglas™ Fresh-Air III Supplied Air Regulator, V-300 Air-Regulating Valve and 3M™ Speedglas™ Welding Filter 9100XX . . . . . . . . . 1,798.01 EA
06-0000-30i-KIT Welding Filter Kit 9100XXi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 671.38 EA Welding Cap, Carry Bag, and Starter Kit Included
3M™ Speedglas™ Welding High-Altitude PAPR System• Can be used to work at altitudes from sea level up to approx. 10,000 ft (3000 meters) with the HE filter
and up to approx. 5,000 ft (1,500 meters) when using the OV/AG cartridge• The new technology in the high-altitude model compensates for air flow discrepancies caused by
the change in air density at increased elevations• By incorporating the 3M™ Speedglas™ Welding Helmet 9100 MP (multi-protection), the Adflo™ PAPR
system has been brought to a new level, offering five levels of integrated welder protection: head, eye, face, respiratory, and hearing (optional) combined into one comfortable system
• Based on the need to increase the fan speed at increased elevations to maintain the minimum design airflow, users of the new Adflo high-altitude turbo assembly may experience a slight reduction in overall run-time
35-3499-01 3M™ Adflo High-Altitude PAPR (9100 FX helmet sold separately) . . . . . . . 1,310.64 EA
35-3499-01Can be used with the new06-0000-30i-KIT Welding
Filter Kit 9100XXi
3M
WELDING
PPE
Respiratory
Helmets
333
WELDING HELMETS
2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.
36-1101-20SW
3M™ L-Series Hard Hat• With welding shield and wide-view faceshield for use with Speedglas™ 9100 Series
Auto-Darkening Filter• May be configured for use with either Adflo or GVP turbo units and supplied air systems• Turbo and supplied air units sold separately
L-705SG 3M™ Hard Hat w/Welding Shield and Wide-view Faceshield . . . . . . . . . . . . . . . . . . . . 741.05 EA
L-705SG
3M, See Warning on Page 331
OSHANOTESProtection From Arc Welding Rays 1810.252 b(2)(iii)
Where the work permits, the welder should be enclosed in an individualbooth painted with a finish of low reflectivity such as zinc oxide (an im-portant factor for absorbing ultraviolet radiations) and lamp black, orshall be enclosed with noncombustible screens similarly painted. Boothsand screens shall permit circulation of air at floor level. Workers or otherpersons adjacent to the welding areas shall be protected from the raysby noncombustible or flameproof screens or shields or shall be requiredto wear appropriate goggles.
©OSHA Standards Digest, Construction Edition
3M™ Speedglas™ WeldingHelmet 9100 FX-Air• 3M™ Adflo™ Powered Air Purifying Respirator (PAPR) for welders• Compact, lightweight system with lithium ion battery, high
efficiency particulate filter, wide leather belt• High efficiency particulate filter that can be “stacked” onto
an optional 3M™ Adflo™ Cartridge (not included) for additional protection against OV/SD/CL/HC vapors
• Flip-up assembly for grinding and prep work• Ergonomic, adjustable head suspension for increased
comfort, helmet stability and weight distribution• 8” x 4¼” clear visor viewing area (approx.)• 3M™ Speedglas™ Auto-Darkening Filter 9100X with
2.1” x 4.2” viewing area (approx.)• Side windows – Shade 5 side filters that increase
peripheral vision• Audible and visual alarms signal low airflow and low
battery charge• Selectable Shades 5, 8–13 and Shade 3 light state• Grinding and Tack modes• For use with all Stick, MIG, and TIG welding processes• Five-position sensitivity control• Adjustable recovery delay• Solar panel• Storage bag, welding cap, and starter kit included• NIOSH-approved system; meets ANSI Z87.1-2010, high impact
36-1101-20SW Speedglas Welding Helmet 9100 FX-Air w/Welding Filter 9100X . . . . . . . 2,522.98 EA and Adflo PAPR w/HE Filter
36-1101-30SW Speedglas Welding Helmet 9100 FX-Air w/Welding Filter 9100XX . . . . . . 2,642.51 EA and Adflo PAPR w/HE Filter
15-0299-99X06 Adflo PAPR P100 Hepa Filter, 36/case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377.26 CS 15-1099-07 Adflo Lithium Ion Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 528.58 EA 35-5401-01 Adflo Turbo Assembly with Lithium Ion Battery . . . . . . . . . . . . . . . . . . . . . . . 1,317.30 EA 06-0000-30i-KIT Welding Filter Kit 9100XXi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 671.38 EA
Welding Cap, Carry Bag, and Starter Kit Included
Can be used with the new
06-0000-30i-KITWelding Filter Kit
9100XXi