The Toolroom Company

Toolroom Bed Mill with Rigid Spindle

MB-R Series

A 12 or 20 station ATCA Rigid tappingA 400 IPM rapid feedrateA 8,000 RPM spindleA Automatic drawbarA 2 year warranty

A Automatic tool setterA One touch set-up buttonsA 4th axis capabilityA Automatic part probeA 3 Electronic handwheel package

MB-16R

The Fryer MB “R” Series is the perfect mill for job shop and toolroom applications. Built to be the most accurateand reliable machine of its type, it is also extremely easy to use. Equipped with a rigid spindle and optionaltool changer, this machine is capable of single or multi part production. The conversational control makesprogramming easy so even one off parts can be done quickly and efficiently.

Outstanding Features

2

MB-R Series Rigid HeadFeatures a high speed 8,000 RPM 40 taper spindle. Center style head allows the use of an automatic tool changer.

3

The Fryer MB-R Series features the ability to run single parts as well as production. With the optional 3 electronic handwheels and menu programming, the MB-R series can make a single part in half the time of a manual machine.With its fast 8,000 RPM spindle, 400 IPM rapids and 12 station tool changer the “R” Series can complete your production runs quickly. The MB-R is truly fast, flexible and easy to use.

Fast, Flexible, SimpleA Simple manual mode with handwheelsA Semi-automatic mode with pushbutton positioningA ‘Do One’ cycles for pocketing, tapping,

facing and moreA One touch set-up keysA Easy conversational programming

A Solid model 3D graphical tool path

A Handwheel run mode for testing programs

A Regenerative drives save 40% energy use

3 Handwheel ConsoleThree handwheels for manual control

A Joystick feed control for X and Y A Coarse / fine feed switch A Electronic stops for controlling positioning A Cut angles by turning one handwheel A ‘Do One’ cycles for pocketing and drilling

MB-10R

70 Jon Barrett Road APatterson, NY 12563 USA Awww.fryermachine.com A845-878-2500

MB-10R26”72”

103”51”72”93”31”62”63”37”

5,000 lbs.

Floor Width (A)Overall Width (B)

X-Axis Movement (C)Floor Depth (D)

Overall Depth (E)Maximum Height (F)

Floor to Table Height (G)Floor to Console Height (H)

Console Swing Radius (I)Electrical Cabinet Swing Radius(J)

MB-14R26”82”

122”56.5”

76”98”33”62”41”36”

7,000 lbs.

MB-16R33”

111”174”68”83”

113”36”62”72”37”

10,000 lbs.Approximate Machine WeightBC

D

I

A

J

F

H

G

E

* Requires some disassembly to meet these minimum dimensions. Contact factory for more information Specifications subject to change without prior notice. © 2017 Fryer Machine Systems, Inc. rev 042873

MB-R SERIES SPECIFICATIONS MB-10R MB-14R MB-16R X Travel 32” 40” 60” Y Travel 17” 20” 25” Z Travel 19” 20” 24” Table Load (Evenly Distributed) 2,000 lbs. 2,450 lbs. 2,950 lbs. Ball Screw Size 1.26” 1.26” 1.57” Table Size 14” x 50” 16” x 54” 18” x 70” T-Slots (No./Width) 3 / 0.630” 3 / 0.630” 5 / 0.630” Table Top to Floor 31” 33” 36” Motor HP (Peak) 12 HP 12 HP 12 HP Max Spindle Torque 40 ft/lbs. Spindle Speed (RPM) 60 - 8,000 RPM Tool Type/Taper CAT 40 (BT-40 Optional) Spindle Nose to Table (Max to Min) 23” - 4” 25” - 5” 28” - 4” Spindle Center to Column 17.5” 20” 25” Tool Storage Capacity 12 (20 Optional) Tool Change Time 7 Seconds Tool Selection Bi-Directional Max. Adjacent Tool Diameter 5.5” Max. Tool Weight 15.4 lbs. Max. Tool Length 11.8” Positioning Accuracy +/- 0.0002” Positioning Repeatability +/- 0.0001” Rapid Traverse 400 IPM Cutting Feed Rate 0.001 - 300 IPM Axis Thrust (Peak) 4,400 lbs. Air Pressure Requirements 85 PSI - 3 CFM Coolant Capacity 12 Gallons Coolant Flow 3 GPM Power Requirements 40 AMP 208-240 VAC 3 PHASE (430-500 Optional) Shipping Dimensions* (WxDxH) 50” x 76” x 76” 54” x 80” x 78” 72” x 92” x 89” Operating Dimensions (WxDxH) 103” x 80” x 94” 113” x 80” x 106” 174” x 92” x 113” Machine Weight 5,000 lbs. 7,000 lbs. 10,000 lbs.

MA

CH

INE

CA

PAC

ITY

SPIN

DLE

ATC

PERF

ORMA

NCE

GEN

ERA

L IN

FO

T he To olro om Company