mayor jesus v. seriña st.,carmen, - dost 10region10.dost.gov.ph/images/brochure.pdf · water and...
TRANSCRIPT
Mayor Jesus V. Seriña St.,Carmen,
9000 Cagayan de Oro City
Telephones:
(088) 858-3931 to 33 (Trunkline)
(088) 858-3931 local 27 (Telefax)
(088) 858-3931 local 26 (RSTL Office)
(088) 850-2653 (RSTL Direct Line/Telefax)
Mobile Phone: +639261893033
Website: http://region10.dost.gov.ph
Email: [email protected]
Facebook: DOST Regional Standards and
Testing Laboratories Region X
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
BUSINESS PROCESS (Chemical and Microbiological Testing Laboratories)
1. Customer (person submitting a sample) registers at the guard house. 2. Customer proceeds to RSTL office at the second floor of the building
and upon instruction of the guard on duty. 3. Sample Receiving Officer (SRO) checks if the sample to be submitted
is valid and if a sterile sampling bottle is required.
If the sample is valid: 1. If sample is valid and sterile bottle is not required, customer gives
information to the SRO for the Test Request Form (TRF). 2. Upon completion of TRF, customer pays total cost of fees to the
Cashier in the first floor and claims Official Receipt (OR) of payment. 3. Customer comes back to the RSTL office, shows the OR and gets
duplicate copy of the TRF. 4. Customer claims Report of Analysis on the date due stated in the TRF.
Reports of analysis are issued only to the person who submitted the sample or to an authorized representative.
If a sterile bottle is required: 1. Customer gives information for the TRF upon instruction of SRO. 2. Customer pays to the Cashier at the 1st floor the partial payment of
P600 for drinking water samples or P500 for environmental samples and gets OR of payment.
3. Customer goes back to the RSTL office, shows OR and claims sterile sampling bottle and gets instructions on sampling schedule, sampling procedure, and handling of samples.
4. Customer comes back to the RSTL to submit valid samples.
If sample is invalid: Customer gets instructions on submission of valid samples and comes back on the scheduled date.
Note: The customer replaces loss, breakage, or damage to borrowed sampling bottles. Effective July 1, 2014, Fees will change according to DOST AO No. 001 Series of 2014.
1
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
SAMPLE TEST TEST METHOD
Food/Feed Products
& Raw Materials Ash Gravimetric 550.00
Cadmium Flame AAS / MP-AES 2300.00
Calcium Flame AAS / MP-AES 1920.00
Copper Flame AAS / MP-AES 1920.00
Fat, Crude or Ether Solvent Extraction 960.00
Extract
Fat, Total Hydrolysis and Solvent 1200.00
Extraction
Fiber, Crude Weende 1380.00
Fiber, Total Dietary Enzymatic/Gravimetric 7200.00
Iron Flame AAS / MP-AES 1920.00
Lead Flame AAS / MP-AES 2300.00
Magnesium Flame AAS / MP-AES 1920.00
Manganese Flame AAS / MP-AES 1920.00
Mercury Thermal Decomposition, 2300.00
Amalgamation, AAS
Moisture Content Air/Vacuum Oven 400.00
Nitrite Colorimetric 800.00
Phosphorus Molybdate Colorimetric 1440.00
Potassium Flame Photometric 1920.00
Protein, Crude Automated Kjeldahl 1000.00
Vitamin C (Juices) Titration 1155.00
Sodium Flame AAS / MP-AES 1920.00
Sugar, Total Lane-Eynon Constant 1100.00
Volume Volumetric
Titrable Acidity (Liquids) Titration 560.00
Water Activity Dew Point 350.00
Zinc Flame AAS / MP-AES 1920.00
(Minimum sample
required is 250 grams,
dried and pulverized)
CHEMICAL TESTING LABORATORY
2
FEE (PhP)
Water and
Wastewater
(Minimum sample
required is one liter
(1 L) per test. Please
confirm with RSTL-X
on the total volume
required if more than
one test is requested)
Alkalinity, Total Titration 500.00
Aluminum MP-AES 1200.00
5-day Biochemical Azide Modification 1500.00
Oxygen Demand (Dilution Technique)
Cadmium Flame AAS / MP-AES 1200.00
Calcium Flame AAS / MP-AES 1200.00
Chloride Titration, Argentometric 750.00
Chromium MP-AES 1200.00
Cobalt MP-AES 1200.00
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
SAMPLE TEST TEST METHOD
CHEMICAL TESTING LABORATORY
Copper Flame AAS / MP-AES 1200.00
Dissolved Oxygen Azide Modification 500.00
Iron Flame AAS / MP-AES 1200.00
Lead Flame AAS / MP-AES 1200.00
Magnesium Flame AAS / MP-AES 1200.00
Manganese Flame AAS / MP-AES 1200.00
Mercury Thermal Decomposition, 2300.00
Amalgamation, AAS
Nickel MP-AES 1200.00
pH Glass Electrode 350.00
Phosphorus Stannous Chloride 720.00
Colorimetric
Potassium Flame Photometric 1200.00
3
FEE (PhP)
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
SAMPLE TEST TEST METHOD
CHEMICAL TESTING LABORATORY
Salinity Salinometer 300.00
Silver MP-AES 1200.00
Settleable Solids Volumetric 202.00
Sodium Flame AAS / MP-AES 1200.00
Total Dissolved Solids Gravimetric 600.00
Total Hardness Titration, EDTA 700.00
Complexometric
Total Solids Gravimetric 445.00
Total Suspended Solids Gravimetric 650.00
Zinc Flame AAS / MP-AES 1200.00
Fertilizer, Plant
Tissue, and other
Related Materials
Ash Gravimetric 300.00
Calcium Flame AAS / MP-AES 1920.00
Dry Matter Content Air Oven 250.00
Lead Flame AAS / MP-AES 2300.00
Manganese Flame AAS / MP-AES 1920.00
Mercury Thermal Decomposition, 2300.00
Amalgamation, AAS
Moisture Content Air/Vacuum Oven 600.00
Nitrogen Automated Kjeldahl 1000.00
pH Glass Electrode 350.00
(Minimum sample
required is 250 grams,
dried and pulverized)
4
FEE (PhP)
Phosphorus, Total Vanadomolybdate 1000.00
Colorimetric
Potassium, Total Flame Photometric 1000.00
Sodium Flame AAS / MP-AES 1920.00
Zinc Flame AAS / MP-AES 1920.00
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
SAMPLE TEST TEST METHOD
CHEMICAL TESTING LABORATORY
Limestone
(Hydrated /
Quicklime)
(Minimum sample
required is 250 grams,
dried and pulverized)
Neutralizing Value Titration 320.00
5
FEE (PhP)
Calcium Carbonate Titration 454.00
Equivalent
Dry Matter Content Air Oven 250.00
Mercury Thermal Decomposition, 2300.00
Amalgamation, AAS
Organic Matter Wakley Black 361.00
Sediments/Soil/
Sludge
(Minimum sample
required is 250 grams,
dried and pulverized)
Mercury Thermal Decomposition, 2300.00
Amalgamation, AAS
Biota/Biological
Samples
(Minimum sample
required is 50 grams,
dried and pulverized)
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
Food/Feed Products
& Raw Materials
Aerobic Plate Count, Pour Plate 550.00
cfu/g or mL
Coliforms, Multiple Tube 550.00
MPN/g or mL Fermentation Technique
Fecal Coliform, Multiple Tube 550.00
MPN/g or mL Fermentation Technique
E. coli Enumeration, Multiple Tube 1000.00
MPN/g or mL Fermentation Technique
Coliforms, Pour Plate - VRBA 800.00
cfu/g or mL
Yeast and Mold Count, Pour Plate 550.00
cfu/g or mL
Spread Plate 550.00
Salmonella spp. Presence/Absence 1000.00
Detection (Rapid Test)
(Detected or Not Detected
/25 g or mL sample)
Staphylococcus aureus Spread Plate 1200.00
Enumeration,
cfu/g or mL
Enterobacteriaceae, Chromogenic Plates 650.00
cfu/g or mL (Rapid Test)
Escherichia coli Chromogenic Plates 660.00
Enumeration, cfu/g or mL (Rapid Test)
(Minimum sample
required is six (6)
packs of unopened
original retail
package, with total
weight of not less
than 250 g or mL)
SAMPLE TEST TEST METHOD
MICROBIOLOGICAL TESTING LABORATORY
6
FEE (PhP)
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
SAMPLE TEST TEST METHOD
MICROBIOLOGICAL TESTING LABORATORY
Salmonella spp. Chromogenic Plates 1000.00
Detection (Rapid Test)
Coliforms, Chromogenic Plates 450.00
cfu/g or mL (Rapid Test)
Aerobic Plate Count, Chromogenic Plates 600.00
cfu/g or mL (Rapid Test)
Yeast and Mold Count, Chromogenic Plates 600.00
cfu/g or mL (Rapid Test)
Staphylococcus aureus Chromogenic Plates 1008.00
Enumeration, cfu/g or mL (Rapid Test)
Commercial Sterility Presence/Absence 2000.00
(for low acid foods)
7
FEE (PhP)
Aerobic Plate Count, Pour Plate 550.00
cfu/cm2 Spread Plate 550.00
Bioburden Samples
Association of Official Analytical Chemists
Bacteriological Analytical Manual (BAM) Online
Collins & Lyne’s Microbiological Methods
Compendium of Analytical Method
Hyserve Manual
Merck Manual
National Standard Methods Health Protection Agency, UK
Standard References
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
Heterotrophic Plate Pour Plate 550.00
Count, cfu/mL
Coliforms, Multiple Tube 550.00
MPN/100 mL, Fermentation Technique
drinking water
Fecal Coliform, Multiple Tube 550.00
MPN/100 mL, Fermentation Technique
drinking water
Coliform Count, MPN/ Multiple Tube 780.00
100 mL, environmental Fermentation Technique
water, 3 dilutions
Fecal Coliform, MPN/ Multiple Tube 680.00
100 mL, environmental Fermentation Technique
water, 3 dilutions
Escherichia coli Multiple Tube 1000.00
Enumeration, Fermentation Technique
MPN/100 mL
Coliforms, Membrane Filtration 450.00
cfu/100 mL Technique
Heterotrophic Plate Chromogenic Plates 500.00
Count, cfu/mL (Rapid Test)
Coliforms, Chromogenic Plates 450.00
cfu/mL (Rapid Test)
Escherichia coli, Chromogenic Plates 660.00
Enumeration, cfu/mL (Rapid Test)
Water and
Wastewater
(Minimum sample
required is one (1)
unopened original retail
package of bottled
water or 250 mL in
provided sterile
sampling containers,
bottle or bag)
SAMPLE TEST TEST METHOD FEE (PhP)
MICROBIOLOGICAL TESTING LABORATORY
8
Hyserve Manual
Standard Methods for the Examination of Water and Wastewater
Standard References
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
Alcohol Content Pycnometer 300.00
Moisture Content Thermogravimetric/ 400.00
Vacuum Oven
Moisture Content, Critical Thermogravimetric 2830.00
Moisture Sorption Gravimetric 5050.00
Isotherm
Nutrition Facts Gravimetric 1500.00
Computation (computation only)
Nutrition Facts Analysis Gravimetric 6570.00
with Computation
(with reports of chemical analysis for the following
parameters: moisture, total fat, protein, ash, and sodium)
pH Glass Electrode 350.00
Titrable Acidity Titration 560.00
Total Solids Gravimetric 445.00
Total Soluble Solids Refractometer 350.00
(Brix)
Sensory Evaluation Panel 500.00
Specific Gravity Pycnometer 300.00
Water Activity Dew Point 350.00
Film Permeability Test Gravimetric 1400.00
(for PE Food Packaging)
Food Products
SAMPLE TEST TEST METHOD
ACCELERATED SHELF-LIFE EVALUATION LABORATORY
9
FEE (PhP)
Food Packaging
* Fee for Food Shelf-Life Evaluation will depend on the type of food
deterioration. Physical, chemical and microbiological parameters will be
selected after the type of food deterioration has been identified through
Preliminary Evaluation.
(Minimum sample
required is six (6) packs
of unopened original
retail package, with total
weight of not less than
250 g)
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
EQUIPMENT / SAMPLE TEST/CAPACITY
Volume Calibration
Gravimetric Method 250.00
Volumetric Method 150.00
Volumetric Method 100 liters 300.00
250-500 liters 500.00
1,000 liters and above 1500.00
Volumetric Method 10,000 liters 600.00
12,000 liters 750.00
13,000 liters 800.00
14,000 liters 850.00
16,000 liters 1000.00
18,000 liters 1100.00
20,000 liters 1200.00
22,000 liters 1350.00
24,000 liters 1450.00
30,000 liters 1800.00
Calibrating Bucket
REGIONAL METROLOGY LABORATORY
Proving Bucket
Tank Truck / Lorry
10
FEE (PhP)
Volumetric Method 2,000 liters 1500.00
Per additional liter 0.10
Other Type Tank
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
EQUIPMENT / SAMPLE TEST/CAPACITY
REGIONAL METROLOGY LABORATORY
Class M 1-5 kg 100.00
10-25 kg 200.00
50 kg 500.00
500 kg 1000.00
Per Additional 100 g 200.00
Class F 1g – 1 kg 200.00
Class M 1 mg – 500 g 100.00/pc
Class F 1 mg – 500 g 200.00/pc
Spring Scale (dial) 10-20 kg 100.00
60-100 kg 200.00
250 kg, 1st 4 points 400.00
per additional point 100.00
500 kg, 1st 4 points 500.00
per additional point 200.00
Platform Balance 1st 4 points 500.00
per additional point 200.00
Triple Beam Balance 1st 9 points 1000.00
per additional point 200.00
0-10 kg, 1st 4 points 250.00
per additional point 100.00
20-60 kg, 1st 4 points 250.00
per additional point 100.00
100-500 kg, 1st 4 points 500.00
per additional point 200.00
Above 500 kg, 1st 4 points 1000.00
per additional point 200.00
Up to 8 points 1500.00
2500.00
2000.00
Up to 1,000 kg 1250.00
Above 1,000 kg 2000.00
Mass Calibration
TEST WEIGHT
SCALE AND BALANCE
Mechanical
Electronic
11
Set of Weights
Analytical / High Accuracy
Truck Scale
Batching Plant
Batch Weigher
FEE (PhP)
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
1st 4 points 1000.00
per additional point 200.00
1st 4 points 1000.00
per additional point 200.00
1st 4 points 1000.00
per additional point 200.00
1st 4 points 1500.00
per additional point 200.00
1st 4 points 1500.00
per additional point 200.00
Pressure Calibration
Pressure Gauge
Test Gauge
Temperature Calibration
Digital Thermometer
Thermocouple Probe/Wire
Oven/Freezer
Glass/Filled/Bimetallic Thermometer
Water Bath
EQUIPMENT / SAMPLE TEST/CAPACITY
REGIONAL METROLOGY LABORATORY
12
Up to 500 psi 300.00
Above 500 psi 400.00
Above 1,000 psi 500.00
Above 2,000 psi 1000.00
(note: all up to 4 points)
1800.00
FEE (PhP)
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
AWARDS, ACCREDITATIONS, RECOGNITIONS,
PNS ISO/IEC 17025:2005 ACCREDITED
for Microbiological Testing Laboratory,
Chemical Testing Laboratory, and
Accelerated Shelf-life Evaluation
Laboratory (relevant to chemical
testing)
Awarded the Plaque of Recognition from
DOST Central Office for being the FIRST
DOST RSTL to be accredited by the
Philippine Accreditation Office (PAO) in the
field of Chemical Testing and for maintaining
its accreditation for more than 5 years
ACCREDITED by the Department of Health-Bureau of
Health Facilities and Services (DOH-BHFS) for Drinking
Water Physical, Chemical and Microbiological Analyses
Recognized by the Philippine Food
and Drug Administration (FDA) for
Food Testing
Registered at the Department of Environment and
Natural Resources-Environmental Management Bureau
(DENR-EMB) as a Hazardous Waste Generator
Licensed by the Philippine Drug
Enforcement Agency (PDEA) to
Handle Controlled Precursors and
Essential Chemicals
Laboratory Accreditation from the Department of
Agriculture-Bureau of Animal Industry for Feeds
Testing in 1999
REGISTRATIONS and LICENSES
Environmental Laboratory Accreditation
from the Department of Environment and
Natural Resources - Environmental
Management Bureau (DENR-EMB) in 2000
13
Special Permit from the Philippine National Police
(PNP) to Possess and Move Explosives/Explosive
Ingredients
REGIONAL STANDARDS AND TESTING LABORATORIES DEPARTMENT OF SCIENCE AND TECHNOLOGY
Region X
BUSINESS PROCESS (Regional Metrology Laboratory)
1. Customer (person submitting an item) registers at the guard house. 2. Customer proceeds to RML Office upon instruction of the guard on duty. 3. Receiving officer checks if the request is an on-site or in-house calibration.
If On-Site: 1. Customer writes letter requesting for On-Site calibration schedule. Request should
be addressed to the Regional Director. This request must state number of items, type, capacity, and other pertinent data.
2. The requesting party must bear the following: a) Transportation expenses (roundtrip) of the calibration officer. b) Porterage of equipment to be brought to and from the calibration site. c) Food and accommodation of the calibration officer. d) Other incidental expenses incurred during the conduct of the On-Site
calibration. 3. Customer returns to RML to accompany staff to On-Site location on their
scheduled date. 4. If an item(s) from RML needs to be borrowed, customer fills up item borrowers
slip. 5. The customer then proceeds to the Work Request Form procedure*. 6. The requesting party should provide assistance, necessary tools and equipment
during the calibration. 7. RML staff shall render services within regular office hours (8:00 AM – 5:00 PM,
Monday to Friday). Overtime fee shall be charged if work is rendered beyond time specified.
8. In case calibration service could not be conducted or completed due to problems attributed to the customer, the customer must bear costs mentioned above if already incurred.
9. If customer has to fetch RML staff from the office, actual departure should be not later than 15 minutes after the agreed time, otherwise job will be rescheduled.
If In-House: 1. The receiving officer checks if the item is valid for calibration. 2. Sample/equipment/instrument submitted for calibration should be clean and in
good working condition. Sample not conforming to these requirements will not be received/calibrated.
3. If the item is not valid, the customer requests instructions for item validity. 4. Calibration services do not include repair. If sample/equipment/instrument cannot
be calibrated due to defect, calibration shall be terminated. Customer shall be notified.
5. If the item is valid, the customer proceeds to the Work Request Form procedure*. 6. Instrument/equipment submitted for calibration should have accompanying
equipment manual. Tank truck should have photocopies of Certificate of Registration (CR), previous calibration certificate, and engine and chassis stencil.
*Work Request Form Procedure: 1. Customer and Item Receiving Officer fill up the Work Request Form (WRF). 2. Customer pays total cost of fees to the Cashier, and claims the Official Receipt
(OR). 3. Customer comes back to Receiving Officer, and shows OR. 4. Customer returns borrowed items (if applicable) after calibration has been
conducted. 5. Customer claims Certificate of Calibration and items on due date (An authorized
representative may claim the certificate of calibration).
14
Department of Science and Technology-X Mayor Jesus V. Seriña Street, Carmen
9000 Cagayan de Oro City
DOST-X VICINITY MAP
Golden Village Subd.
Pop Com
DOST-X
City Hospital
Mt. Carmel Church
City Hall
Cathedral
Ysalina Bridge
VISIT the Regional Standards and Testing Laboratories
Region X on
View the testing and calibration services offered by RSTL and you
may also post your inquiries, comments, complaints or
suggestions.
Booking of schedules for submission of samples for
analysis is still done through phone call or personally
at RSTL-X office.
St. Mary’s
Academy
Search the “DOST Regional Standards and Testing Laboratories Region X”,
Pictures and Layouts by ARCD Revised by TSMP Revised 07-07-14