MAXMEC is a division of NTIL NV • Geelseweg, 80 • 2250 Olen - Belgium • +32 (0)14 25 92 83 • sales@maxmec.be • www.maxmec.be

NEW PRODUCT

COMINGSOON

100KG

120KG

MAXX-BANDER MAXX-STRAPPER MAXX-TABLE-STRAPPER MAXX-WELD PNEUMATIC

MAXX-TAPE AUTO

MAXX-WELD ACCU

MAXX-SHRINK MIDIMAXX-VAC-SEAL MAXX-SHRED CUSHION

• The table top MAXX-BANDER will band with 30 mm x 200m paper or pp tape to any shape from 30x50mm to 360x200mm

• Adjustable tension, weld time, weld temp, reloading tape is quick and MAXX-; optional footpedal or auto start, MAXX--wipe stainless steel table

• Optional 2500m jumbo roll dispenser stand, tape welding using heat, far more reliable than other methods that require daily cleaning

• Full cycle in 3 sec• Size w60xd30xh50cm, 35kg head • Add on 70 cm, 25 kg for stand • Power AC240V-150w• Boxed on skid

• Now you can vacuum pack items fast and at lowest cost• Using PP vac bags the pump removes 98% of all air, the

sealer bar lowers automatically and seals the bag• Optionally you can fill the bag with inert atmosphere at 0.5 bar

(co2 or nitrogen from a tank) and seal to make a pillow pack• Cycle duration ca 10 sec depending on bag size• Production: 3-10 Cycles/min• Machine body stainless steel• Machine Dimensions: 660 × 502 × 1000mm• Sealer Dimensions: 600 × 10mm• Pump Capacity: 20 m3/h• Power Consumption: 750W• Voltage: 110/220/240V• Weight: 100kg• Crated on skid

• The ideal solution to fully wrap and protect your product• Max pack size: L 455 x W 355 x H 120mm• 18 cycle/min with good quality 1-5P/min (note cheaper 1d films may shrink slowly and unevenly)• Variable temp to 180°C, variable film depth, variable closing time, variable film width roll

dispenser• 2 functions: Seal Only, Seal and Shrink• Film perforator to let air escape• Machine size: L 1300 x W 780 x H 800mm • Net Weight: 120kg • Crated on skid• Power: 220v 50Hz 1Phase • 16A - 2000W

• The MAXX-STRAPPER will band pp straps from 9 to 15mm using 3000m spools • Parcel size min w100mm×H30mm to max W850mm×H600mm • Variable tension and weld temp and sealing time • MAXX- to thread in the strap and perfect strap feeding • Stainless table and heavy duty frame built for years of service • Strapping spool: mandrel Ø200mm, max spool width 190~230mm• Full cycle in 3 sec• Variable tension 10 - 70 kg/f• Auto start sensor• Mounted on locking casters• Short strap feed error detection• Size: L 1424mm×W 600mm×H 1556mm• Weight: 210kg • Power AC240V-300W• Crated on skid

• The floor standing MAXX-TABLE STRAPPER will band pp straps from 6 to 15mm on 3000m spools

• Parcel size min. 60x60mm to max. unlimited• Variable tension and weld (Max tension:60kg) • Hand feed the strap into the weld infeed system• Full cycle in 3 sec • Spool mandrel: 200mm • AC240V-660W• Weight: 60kg, Crated on skid

• A simple to use hand held strap welding tool using friction to melt and weld the pp strap

• Strap wide: 13 > 19mm wide • Strap thickness Heavy gauge 1,0-1,5mm• Strap material: Polyester• Strap tension: Max. 2744 N (at 0,63 Mpa)• Air pressure 0,5 > 0,7Mpa• Whole process ± 5sec• Weight 3,8 kg with hook for weight counter

balancer• Pneumatic supply requirement 10bar 160ltr/min;

standard clip on hose fitting• Dimensions: L 275 x W 115 x H 130mm

• A simple to use hand held strap welding tool using friction to melt and weld the pp strap from 9 > 15mm wide

• Strap thickness 0,60-1,05 mm• 1. Slide in the fixed strap • 2. Slide in the open end to be wound in • 3. Press the wind button• 4. Press the weld button 2sec • 5. Release and cut => whole process

done in 4sec• Tension: 650-3000 N adjustable

(max. tension depends on strap quality)• Tension speed: 152-225 mm/s• Weight with battery ±4,5 kg, hook for weight counter balancer• 2 batteries supplied; good for ±150 cycles• AC240V > DC24V charger supplied, recharge ±2,5 hrs• Boxed

• Low cost security sealing• The MAXX-TAPE auto will feed to 1 or 2 different presets lengths, wet and cut gummed tape • Gummed tape is cost effective, gives a better seal and is tamper proof• Also the fact that you need a wetting device to apply it means that a van driver can’t reseal a

box they opened• Feed lengths from 90cm to 900cm• Tape to 90 mm wide @ 90 gsm • Wetting tank contains 1000cc of water, enough for 2 days use • AC240V - 200w • 60x50x30cm • 30 kg • Boxed

• Tool steel shredding cutters• Thermal overload motor cut off with reverse function• Paper dust extractor fan• Infeed length: unlimited• Process width: 33cm• Process speed to 8m/ min• Height : to 8 mm card• Power single phase 400w 50hz• Machine size: 110x66x66cm• Weight: 160 kg• Crated on skid

EXTRABATTERY

Min 100mmMax 850mm

Min

30m

mM

ax 6

00m

m

EXTRA STRONG24V battery

Stainless Working Table

Mounted on Locking Casters

Adjustable Roll Holder for Rolls to Ø220mm with 3“ Mandrel

Sealingheaters with timer

Chamber hold down magnets with timer

Adjustable position loading table for different product

depths

Heat generator

Ref: DM2001V2 Ref: MM500

Ref: MM550

Ref: MM560

Ref: MM1000

Ref: MM600

Ref: MM800Ref: MM700

Ref: MM570

Ref: MM575

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

www.M

AXMEC.be

NTIL NV

Geelseweg, 802250 Olen - Belgium+32 (0)14 25 92 83

info@ntil.eu

Option ø250mm

NEW PRODUCTCOMINGSOON

NEW PRODUCT

COMINGSOON

This catalog is an edition of NTIL nv, Geelseweg 80, B-2250 OLEN (Belgium). This catalog is protected by a copyright and nothing from this edition may be reproduced or used without any prior written authorisation. Whilst every effort has been made to ensure the accuracy of the information in this catalog, errors do creep in and NTIL nv can accept no responsibility for failures, wrong specifications, accuracy of colours, losses or damages caused. NTIL nv denies any responsibility claims or damages caused by use of our products. NTIL nv is not responsible for product changes or availability of our products. The products of dangerous nature included in this catalog are submissive to special handling and storage specifications. Please check with your local authorities for existing legislation.

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

KEY FEATURES

MAXX-LABEL NC

MAXX-LABEL EDGEMAXX-LABEL ASTRO

MAXX-LASER-LABEL

MAXX- PILLOW-INDUSTRIAL

MAXX- APPLICATOR-ROUND MAXX- VACCUM FLAT APPLICATOR

MAXX- CRINKLE FILL

MAXX- CLOSER SIDE DRIVEMAXX- PROTO-BOX

• At last a well priced industrial pillow machine using low cost rolls

• Production speeds to 14M/min, uses low cost 200M cross perforated rolls

• Can fill many different roll formats and pillow configurations on right to left film

• Pillow size from 120mm > 200mm wide x 200M long and 2ltrs fill rolls 120 or

200mm wide x 400M @30micron

• Pillow roll material sizes

• Will run any right to left unwinding or boxed zig zag film

• Perfect low cost solution for automatically applying single labels to round objects

• Production speeds to 1200 labels/h

• Product diameter from 2>18cm (diameter must be constant along length)

• Product length from 5>20 cm

• Beak applicator with backing rewinder

• 240V - 250W - 30 kg

• 30x30x65cm boxed

• Low cost void fill with

automatic feeding at the

push of a button

• High volume rugged

kraft paper is interlock

expanded 500 times to give

a great cushioning effect to

your product

• The kraft paper is pre-per-

fed for easy separation

at 36cm intervals (before

crinkle)

• Low cost zigzag flat

stacked kraft paper 360m

long bundles

• Perfect low cost solution for automatic

application of labels to flat items

• Production speeds to 1000 labels/h

• 240V - 250w - 30x30x65cm - 30kg - boxed

• Semi automatic box closing with top and or bottom tape sealing and tape cut off (box top has to be flat)

• Carton size: (L) 150 x (W) 100-500 x (H) 100-500mm

• Table height: 580-880mm

• Frame has integrated height adjustment via screw

• Centring side drive can be swung in and out in seconds

• Tape width: 2” or 3”

• Roll dispenser for tape rolls to 500m, ø200mm std, (option ø250mm) with integrated cutter

• Production speeds to 10box / min on small boxes

• Power 220V monophase

• Digital roll to roll label cutter• The MAXX-LABEL NC will take 150m rolls of uncut printed and marked

labels, cut the label to any form and size up to 20x20cm and strip away the waste leaving you with perfectly cut evenly spaced labels.

• PC drive using Corel Draw• Ready to application to any object• Production up to 2M/min depending on label cut format• Machine size: 120x60x60 cm• Power: 240V 350W, Weight: 100kg, crated on skid

• The quick and automated way to produce box blanks prototypes and short runs• Slitting and Scoring function on card to 2mm thick (separate mounting)• PC driver using Corel Draw• Power 220V monophase• Crated on skid

60cm

90cm

Easy to adjust 100-500mm

As from

• Printing specifications

• Print Method: Brand New Inkjet Technology: Drop on Demand Thermal Inkjet

printing

• Some inkjet printhead: 215,9mm print width

• Number of nozzles: 70400 (14080 per color)

• Print speed: 9M/Min (Best quality) - 18M/Min (Normal quality)

• Resolution: 1600x1600 Best quality - 1600x800 Normal quality

• Ink: 5 individual cartridges 250ML CMYKK water-based dye inks

• Types of paper: Plain paper, Matte and glossy inkjet paper, pressure sensitive

paper

• Paper Thickness: 0,13 to 0,33mm (3to12points)

• Interface: USB and Ethernet

Software: Windows XP, Vista

• Low cost, entry level label printing solution• Short to mid run label production• Print rolls ranging from 76,2-216 mm wide• Print speed ranges from 4m/min to 9m/min depending on substrate• Print die-cut, kiss-cut or continuous rolls• Résolution: 1200 x 600 DPI à 160 LPI • CMYK Dry Toner• Print Speed Up to 9.14 meters/min• Software includes job costing, color management tools• Capable of producing approximately 82% of the Pantone® color gamut• Highly configurable and can be paired up offline with finishing, lamination, UV coating...• Utmost versatility in label substrates ranging from basic high gloss labels to polyesters,

textured stock and tag stocks.• Dimensions (H X W X D): 660 mm x 434 mm x 546 mm• Weight: 50kg

• Roll mandrel 1” or 3”option • Roll Ø200 or 280mm option• Roll width >200 or 250mm option

Mandrel 3”

Roll width 15 to 150 mmRoll outer diameter to 300 mm

Outer diameter to 300 mmRoll width 15 mm to 150 mm

VACUUM PUMP (supplied)

Sponge Rubber Vacuum Applicator Head

Product Tray with Adjustable Front and Left Side Lays

Compressed Air Inlet 0.5 bar with Regulator and Drier. (Compressor not supplied)Rewinder

AdjustableStoke Piston

Mandrel 3“

Min label 10w x 15 l mmMax label 150w x 200 l mm

Film sold separetly

• Laser tube type American Coherent Metal sealed RF CO2 laser generator

• Laser power 30W• Laser head Single laser head• Gross power 1500W• Driving system Step motor• Cooling method Air cooling• Cutting area 850mmx600mm• (Cutting speed 0-36000mm/min• Engraving speed 0-64000mm/min• Auto feeding system YES• (View capture device Standard configuration• Power supply 220V, 50HZ• Net Weight 290kg• Dimension(L*W*H) 2000x1550x1300mm• Environment requir. Temperature 15°C-35°C, • Crated on skid

Mandrel 3”

MAX roll Ø250 mm

50 to 200 mm

Ø10 to 130 mm

Can use most makes

of zig zag kraft paper

up to 360 mm wide and

90 gsm

Min 30m

m

Max 120m

m Min 40mm

Max 180mm

Min

30m

mM

ax 1

10m

m

Ref: MM150

Ref: MM100

Ref: MM200

Ref: MM300 Ref: MM290

Ref: MM280

Ref: MM250Ref: MM350 MAXX CRINKLE FILLRef: MM350P PAPER BUNDLE 360m

Ref: MM260 Ref: MM270