maxicoll english catalog
DESCRIPTION
maxicoll english catalogTRANSCRIPT
CONSTRUCTION CHEMICALS
Maxicoll Construction Chemicals, the construction industry since 2002 and their production of building materials for the chemical content of the domestic / international marketing issues serves.
Maxicoll Construction Chemicals production activities in Istanbul 'in, starting today, Kahramanmaras and Akhisar / Manisa ' in the production of Each passing day increases the capacity of the production facilities. In particular adhesives, joint fillers, heat insulation mortars, plasters, repair mortars and screeds to be the main product over twenty, a hundred sub-product and production activities are ongoing.
Determining customer satisfaction as the most important priority of our company, our customers' expectations and needs as soon as possible an effective, economical solutions. Also product design with all the requirements are able to provide our customers with all kinds of pre-and post sales technical information, product designs as needed to meet the needs of our customers are able to make the original.
Our company is equipped with modern testing devices of all products with the Quality Control and R & D laboratories, able to ensure compliance with relevant quality standards and develop. Maxicoll Construction Chemicals has given importance to quality, international quality standard ISO 9001: 2000 quality management certificate in taking the proven. In addition, the TSE is necessary and important to our industry standards EN 12004 and EN 13888 standards have been manufacturing products.
Young and dynamic staff, exclusive dealers throughout Turkey over the years and experienced hand in hand with our customers by providing quality, primary goal is to create a solid and aesthetic interest.
FAMILY MAXICOLL maximum quality, maximum convenience
MAXICOLL EXTRA GRAY ADHESİVECeramic / Tile
Cement and mineral filler based single-component ceramic, tile adhesive mortar that contains chemical
additives to increase the open-time and the performance of the product.
Indoor and outdoor, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, alum can be used
in cement-based substrates. Minimum of 3% water absorption, is an ideal product for small and
medium-sized tiles.
The product shelf life, dry environment, the original package is 12 months.
Appearance: Grey Powder
Packaging: 25 kg kraft bag
Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water
Consumption:4.5-5.5 kg / m²
MAXICOLL EXTRA WHITE ADHESIVE
Ceramic / Tile
Cement, mineral filler and polymer based high adhesion strength, single component, flexible, ceramic,
tile, granite, adhesive mortar that contains chemical additives to increase the open-time and the
performance and reduce slippage of the product.
Interior and exterior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-
based substrates, the human density is more than shopping-business centers, hospitals, schools can be
used in such places. Excellent adhesion to all surfaces.
The product shelf life, dry environment, the original package is 12 months.
Appearance: White Powder
Packaging: 25 kg kraft bag
Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water
Consumption: 5-6 kg / m² (back of the big size tiles must be covered with mortar)
MAXİCOLL GRAY ADHESİVECeramic / Tile / Granite
Cement, mineral filler and polymer based high adhesion strength, single component, flexible, ceramic,
tile, granite, adhesive mortar that contains chemical additives to increase the open-time and the
performance and reduce slippage of the product.
Interior and exterior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-
based substrates, the human density is more than shopping-business centers, hospitals, schools can be
used in such places. Excellent adhesion to all surfaces.
The product shelf life, dry environment, the original package is 12 months.
Appearance: Grey Powder
Packaging: 25 kg kraft bag
Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water
Consumption:5-6 kg/m² (back of the big size tiles must be covered with mortar)
CONSTRUCTION CHEMICALS
extragrey
CERAMIC - TILE
ADHESIVE
TYPE C1T
CONSTRUCTION CHEMICALS
extrawhite
CERAMIC - TILE
ADHESIVE
TYPE C1T
CONSTRUCTION CHEMICALS
flexgrey
CERAMIC - TILE - GRANITE
ADHESIVE
TYPE C2TE
MAXICOLL FLEX WHITE ADHESIVE
Ceramic / Tile / Granite
Cement, mineral filler and polymer based high adhesion strength, single component, flexible, ceramic,
tile, granite, adhesive mortar that contains chemical additives to increase the open-time and the
performance and reduce slippage of the product.
Interior and exterior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and
cement-based substrates, the human density is more than shopping-business centers, hospitals,
schools can be used in such places. Excellent adhesion to all surfaces.
The product shelf life, dry environment, the original package is 12 months.
Appearance: White Powder
Packaging: 25 kg \ health kraft bag
Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water
Consumption:5-6 kg/ m² (back of the big size tiles must be covered with mortar)
FLEX MORTAR GRAY ADHESIVE Ceramics / Tiles / Granite / Porcelain
Cement, mineral filler and extra polymer based high adhesion strength, single component, flexible,
ceramic, tile, granite, porcelain adhesive mortar that contains chemical additives to increase the open-
time and the performance and reduce slippage of the product.Due to high thixotropic property of the
last inserted resistance against slipping. 0.5% 'up to the maximum water absorption materials are ideal
for 50x50 size. Indoor and outdoor, wall and floor, wet and dry surfaces, all kinds of concrete, plaster,
grout, and cement-based surfaces, heated from below, the sudden heat changes is more, the traffic
load and exposed to intensive factory, warehouse space, can be used in areas such as shopping-
business center. Excellent adhesion to all surfaces.
The product shelf life, dry environment, the original package is 12 months.
Appearance: Grey Powder
Packaging: 25 kg kraft bag
Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water
Consumption:5-6 kg/ m² (back of the big size tiles must be covered with mortar)
MAXICOLL FLEX MORTAR WHITE ADHESIVECeramics / Tiles / Granite / Porcelain
Cement, mineral filler and extra polymer based high adhesion strength, single component, flexible,
ceramic, tile, granite, porcelain adhesive mortar that contains chemical additives to increase the open-
time and the performance and reduce slippage of the product.Due to high thixotropic property of the
last inserted resistance against slipping. 0.5% 'up to the maximum water absorption materials are ideal
for 50x50 size. Indoor and outdoor, wall and floor, wet and dry surfaces, all kinds of concrete, plaster,
grout, and cement-based surfaces, heated from below, the sudden heat changes is more, the traffic
load and exposed to intensive factory, warehouse space, can be used in areas such as shopping-
business center. Excellent adhesion to all surfaces.
The product shelf life, dry environment, the original package is 12 months.
Appearance: Grey, White Powder
Packaging: 25 kg \ health kraft bag
Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water
Consumption:5-6 kg/ m² (back of the big size tiles must be covered with mortar)
CONSTRUCTION CHEMICALS
flexwhite
CERAMIC - TILE - GRANITE
ADHESIVE
TYPE C2TE
CONSTRUCTION CHEMICALS
flex mortargrey
CERAMIC - TILE GRANITE - PORCLEAIN
ADHESIVE
TYPE C2TE
CONSTRUCTION CHEMICALS
flex mortarwhite
CERAMIC - TILE GRANITE - PORCLEAIN
ADHESIVE
TYPE C2TE
MAXICOLL ULTRA FLEX WHITE ADHESIVEGranite / Marble / Porcelain / Natural Stone
Cement, mineral filler and extra polymer based very high adhesion strength, single component,
flexible, granite, porcelain, marble, natural stone adhesive mortar that contains chemical additives to
increase the open-time and the performance and reduce slippage of the product. Due to high
thixotropic property of the last inserted resistance against slipping. % 0 'up to the maximum water
absorption materials are ideal for 60x60 size.
Interior and exterior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and
cement-based surfaces, heated from below, the sudden changes in temperature than that intense load
and exposed to traffic, factory, warehouse, hospital, shopping center in areas such as bonding of
ceramics is also easily available pool. Excellent adhesion to all surfaces.
The product shelf life, dry environment, the original package is 12 months
Appearance: Grey, White Powder
Packaging: 25 kg \ kraft bag
Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water
Consumption:5-6 kg/ m² (back of the big size tiles must be covered with mortar)
MAXICOLL RAPID SETTING FLEX GRAY ADHESIVE Ceramics / Tiles / Granite / Porcelain / Marble / Natural Stone
Cement, mineral filler, polymer and high alumina cement based high adhesion strength, single
component, flexible, quick set, ceramic, tile, granite, porcelain, marble, natural stone adhesive mortar
that contains chemical additives to increase the open-time and the performance and reduce slippage of
the product.
Indoor and outdoor, wall and floor, mid-grade wet and dry soils, concrete, plaster, grout, and cement-
based surfaces, provides excellent adhesion. Very intense, in areas exposed to pedestrian traffic, will
be on the heated surfaces and metal parts. Due to it’s rapid settingproperty, it could not be diffuse very
large areas. Adhesive application can be made a minimum of 5 hours after the grouting process.
The product shelf life, dry environment in original packaging is 6 months.
Appearance: Grey Powder
Packaging: 25 kg \ 'health kraft bag
Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water
Consumption:4-5 kg/ m²
MAXICOLL ULTRA FLEX MORTAR GRAY ADHESIVEGranite / Marble / Porcelain / Natural Stone
Cement, mineral filler and extra polymer based very high adhesion strength, single component,
flexible, granite, porcelain, marble, natural stone adhesive mortar that contains chemical additives to
increase the open-time and the performance and reduce slippage of the product. Due to high
thixotropic property of the last inserted resistance against slipping. % 0 'up to the maximum water
absorption materials are ideal for 60x60 size.
Interior and exterior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and
cement-based surfaces, heated from below, the sudden changes in temperature than that intense load
and exposed to traffic, factory, warehouse, hospital, shopping center in areas such as bonding of
ceramics is also easily available pool. Excellent adhesion to all surfaces.
The product shelf life, dry environment, the original package is 12 months
Appearance: Grey Powder
Packaging: 25 kg kraft bag
Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water
Consumption:5-6 kg/ m² (back of the big size tiles must be covered with mortar)
CONSTRUCTION CHEMICALS
ultra flexgrey
SWIMMING POOL TILESWATERPROOFING
FACTORIES GRANITE FOR BUSİNESS CENTERS
MARBLE
ADHESIVE
TYPE C2TE
new
new
CONSTRUCTION CHEMICALS
The Fast Socket
GreyCERAMIC - TILE - GRANITE
MARBLE - PORCELAIN NATUREL STONE
FLEXADHESIVE
TYPE C2F
CONSTRUCTION CHEMICALS
ultra flexwhite
SWIMMING POOL TILESWATERPROOFING
FACTORIES GRANITE FOR BUSİNESS CENTERS
MARBLE
ADHESIVE
TYPE C2TE
MAXICOLL CELLULAR CONCRETE BIMS BRICK KNITTING MORTAR Cellular Concrete/ Bims Brick
Cement and mineral filler-based, highly polymer additive, single-component, paste, and plastering (for
joints) mortar. Product performance and operation (application) contains chemical additives to increase
the duration. Glass laying bricks glued on top of all the BTB and the types of glass mosaic and glue
used to fill joints.
The product shelf life, dry environment in original packaging is 6 months.
Appearance: Grey powder
Packaging: 25 kg kraft bag
Water mixing ratio: Dust, 25 kg, 6.5 7.5 liter of water
Consumption: 6-8 kg / m² for the dimensions of 20x50x20 cellular concrete
MAXICOLL GLASS BRICK KNITTING MORTAR Glass Brick / BTB / Glass Mosaic White
cement and mineral filler-based, highly polymer additive, single-component, paste, and plastering (for
joints) mortar. Product performance and operation (application) contains chemical additives to increase
the duration. Glass laying bricks glued on top of all the BTB and the types of glass mosaic and glue
used to fill joints.
The product shelf life, dry environment in original packaging is 6 months.
Appearance: white powder
Packaging: 25 kg kraft bag
Water Mixing Ratio: Dust, 25 kg, 6- 7 liter of water
Comsumption:2 kg/ m² to 8 mm in thickness of the joint
RAPID SETTING FLEX WHITE ADHESIVE Ceramics / Tiles / Granite / Porcelain / Marble / Natural Stone
Cement, mineral filler, polymer and high alumina cement based high adhesion strength, single
component, flexible, quick set, ceramic, tile, granite, porcelain, marble, natural stone adhesive mortar
that contains chemical additives to increase the open-time and the performance and reduce slippage of
the product.
Indoor and outdoor, wall and floor, mid-grade wet and dry soils, concrete, plaster, grout, and cement-
based surfaces, provides excellent adhesion. Very intense, in areas exposed to pedestrian traffic, will
be on the heated surfaces and metal parts. Due to it’s rapid settingproperty, it could not be diffuse very
large areas. Adhesive application can be made a minimum of 5 hours after the grouting process.
The product shelf life, dry environment in original packaging is 6 months.
Appearance: White Powder
Packaging: 25 kg kraft bag
Water Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of water
Consumption:4-5 kg/ m² (for big size tiles 5-6 kg/m²)
CONSTRUCTION CHEMICALSRAPID SETTING
FLEX WHITE ADHESIVE
CERAMIC - TILE - GRANITEMARBLE - PORCELAIN
NATUREL STONE
FLEXADHESIVE
TYPE C2F
CONSTRUCTION CHEMICALS
GLASS BRICK
ADHESIVE
MORTAR – KNITTING
GLASS BRICKS BTB
GLASS MOSAIC
white
CONSTRUCTION CHEMICALSGas Concrete
MAXICOLL CELLULAR
CONCRETE BIMS BRICK
KNITTING MORTAR
POLYMER REINFORCEDGAS CONCRETE
ADHESIVE BASED MINERAL FILLER
Grey
MAXICOLL STYROFOAM PLASTEREPS / XPS / ROCKWOOL / GLASS WOOL
Cement and mineral filler based, fiber reinforced, polymer-reinforced, easily applied, adhesive applied
to a very good heat insulation slab heat insulation plate plaster. Of all kinds in order to provide heat
insulation, interior and exterior EPS, XPS, Rock Wool, Glass Wool Heat insulation panels, such as
plaster is applied on the surface. Thermal insulation panel mesh is applied on the plaster dries. File the
application on the second floor for 3-4 hours.
The product shelf life, dry environment, the original package is 12 months.
Appearance: Grey Powder
Packing: 25 kg kraft bags
Water Mixing Ratio: Dust, 25 kg, 6- 6,5 liter of water
Comsumption:4-4.5 kg/ m² (it can be changed according to surface properties)
MAXICOLL THİN REPAİR MORTARRepair Mortar,
Cement and mineral filler based, fiber reinforced, polymer-reinforced, high-strength, one component
repair mortar repair. -1 mm in thickness of the thin repair mortar for Grain, for thick repair mortar - 4 mm
is. Interior and exterior, concrete, plaster, cement and so on. structure of the floors and walls for cracks,
wear, and filling gaps, repair, reinforcement and strengthening of the weak and worn surfaces, as a
result of erosion of reinforcement bars are used to repair damaged concrete. 3-20 mm in thickness for
thin repair mortar, a thick repair mortar for the 5 - 40 mm. Very humid or very hot weather, making the
application should be avoided as much as possible.
The product shelf life, dry environment, the original package is 6 months.
Appearance: grey Powder
Packing: 25 kg kraft bags
Water Mixing Ratio: Dust, 25 kg, 5- 5,5 liter of water
Comsumption:1.6 kg/ m²( for 1 mm thickness)
MAXICOLL STYROFOAM ADHESIVEEPS / XPS / ROCKWOOL / GLASS WOOL
Cement and mineral filler based, fiber reinforced, polymer-reinforced, heat-insulating sheet-adhesive
glue is applied to the surface very well. All kinds of internal and external fronts in order to provide
thermal insulation EPS, XPS, stone wool, glass wool as thermal insulation panels used for bonding.
Each kind of plaster, concrete, bricks, aerated concrete, pumice, brick, brick and so on. structural
elements can be applied over.
The product shelf life, dry environment, the original package is 12 months.
Appearance: Grey Powder
Packing: 25 kg kraft bags
Water Mixing Ratio: Dust, 25 kg, 6- 6,5 liter of water
Comsumption:4-4.5 kg/m²( it can be changed according to surface properties)
CONSTRUCTION CHEMICALS
Styrofoam Adhesive
EPS - XPS - ROCKWOOL GLASS WOOL FOR
FLEX DOPED FIBER
EXTERIOR THERMAL SHEATHING ADHESIVE
High Strength
CONSTRUCTION CHEMICALSStrafor Plaster
GreyEPS - XPS
ROCKWOOL
GLASS WOOL
FLEXDOPED FIBER
PLASTER COATING
Splinterproof Water
Repellent
CONSTRUCTION CHEMICALS
Repair Mortar
DOPED FIBER HIGH STRENGTH REPAIR MORTAR
thin
splinterproof
MAXİCOLL SURFACE HARDENERFresh concrete is used as the monolithic, concrete dust, wear, abrasion and chemical resistance
increases, based on cement and mineral filler, polymer additives, high-strength surface hardener. The
factory, warehouse, garage, parking, garage, exhibition, supermarket, aircraft hangars Harmful if
applied to areas of medium and heavy loads, such as exposed. Surface hardener is applied in powder
form aggregates in the material should not be placed long distances to decomposition.
The product shelf life, dry environment in original packaging is 6 months.
Appearance: Grey, Pink, Red, Green Powder
Packing: 25 kg kraft bags
Comsumption:4-6 kg/m² (changes with load capacity)
MAXICOLL SELF LEVELLING GROUT
Cement and mineral filler based, fast setting, self-leveling, high-strength floor leveling mortar. All interior
surfaces of buildings exposed to medium and heavy traffic in the last floor coating alum
pre-leveling, as well as domestic fronts, ceramic, marble , tile, pvc, laminates, parquet floor before such
applications are to fix. 60 minutes before administration of foot and mouth maxicoll surface must be
primed with primer levelling surface bonding enhancer. Medium-density surfaces, thickness 2-10 mm,
5-20 mm high-density surfaces.
The product shelf life, dry environment in original packaging is 6 months.
Appearance: White Powder
Packing: 25 kg kraft bags
Water Mixing Ratio: Dust, 25 kg, 5- 5,5 liter of water
Comsumption:1,5 kg/m²( for 1 mm thickness)
MAXICOLL THICK REPAIR MORTARREPAİR MORTAR,
Cement and mineral filler based, fiber reinforced, polymer-reinforced, high-strength, one component
repair mortar repair. -1 mm in thickness of the thin repair mortar for Grain, for thick repair mortar - 4 mm
is. Interior and exterior, concrete, plaster, cement and so on. structure of the floors and walls for cracks,
wear, and filling gaps, repair, reinforcement and strengthening of the weak and worn surfaces, as a
result of erosion of reinforcement bars are used to repair damaged concrete. 3-20 mm in thickness for
thin repair mortar, a thick repair mortar for the 5 - 40 mm. Very humid or very hot weather, making the
application should be avoided as much as possible.
The product shelf life, dry environment, the original package is 6 months.
Appearance: grey Powder
Packing: 25 kg kraft bags
Water Mixing Ratio: Dust, 25 kg, 5- 5,5 liter of water
Comsumption:1,6 kg/m²( for 1 mm thickness)
CONSTRUCTION CHEMICALS
Repair Mortar
DOPED FIBER HIGH STRENGTH REPAIR MORTAR
thick
splinterproof
CONSTRUCTION CHEMICALS
Surface Hardener
Factory - Warehouse - ParkingGarage - Fair
For Aircraft Hangars
Polymer Additives
High Strength
Bag Price Grey
newBag Price Pink Bag Price Red Bag Price Green
CONSTRUCTION CHEMICALS
Self Levelling
Grout
Cement Based Quick Connectors Area
Polymer Reinforced
Splinterproof
MAXICOLL DECORATIVE PLASTER White cement , mineral filler and polymer based, weather resistant exterior, comfortable final coat
plaster mortar. Exteriors for decorative purposes, each type of concrete, and plaster applied over
thermal insulation panel. Cellular Concrete, gross concrete, rough plaster is made on the application,
the surface must be primed with Primer Maxicoll Leveling Surface Bonding Enhancer.
The product shelf life, dry environment in original packaging is 6 months.
Appearance: White Powder
Packing: 25 kg kraft bags
Water Mixing Ratio: : Dust, 25 kg, 6,5- 7 liter of water
Consumption: 1.5 kg/ m² (for 1 mm thickness)
MAXICOLL CRYSTALLINE SINGLE COMPONENT WATERPROOFING MORTARCement, mineral filler and extra polymer based ,single component waterproofing plaster.
The pools, canals, foundations, water tanks, basement walls, tunnels, the walls of the ground, water
and humidity can easily be applied to all the inner and outer walls. The application must be made in two
layers. First floor cured (depending on ambient temperature, about 2-4 hours) after the second coat is
made perpendicular to the first floor.
The product shelf life, dry environment in original packaging is 6 months.
Appearance: Grey Powder
Packing: 25 kg kraft bags
Mixing Ratio: Dust, 25 kg, 7- 7,5 liter of water
Consumption: 2 to 2.5 kg/ m² (1st floor), 1 to 1.5 kg / m 2 (2nd floor)
new
CONSTRUCTION CHEMICALS
ROUGH
FLAT
ALUM Self-settled
Large Filled with sandUse together.
Self Leveling
Mortar
DECORATIVE
PLASTER
All-Purpose Type Thermal Insulation Panels Decorative
Concrete Exterior Wallsand plaster on the applicable
Coat Mortar
CONSTRUCTION CHEMICALS
Bag Price / White / Ivory /Beige
CRYSTALLINE
WATERPROOFING
MORTAR GREY
Water and Moisture Field LocationsPools
Basement wallsChannels
Providing Water ProofingSingle Component
CONSTRUCTION CHEMICALS
Water
Insulation
Plaster
Self Levelling
Mortar +
MAXICOLL ROUGH FLAT ALUM
Based cement and mineral filler, the fluid screed. Buildings are
in rough screed, self-settled, large filled structure, can also be
applied by machine. 25 kg of dust, 40 kg \ 'health packages are
in the thick with silica sand. 10 cm ' up to be applied.
The product shelf life, dry conditions, 12 months in original
packaging.
Appearance: Grey Powder
Packing: 25 kg kraft bags
40 kg thick silica sand bags along
Water Mixing Ratio: Dust, 25 kg, 5- 5,5 liter of water
Consumption: 25 kg/ m²
MAXICOLL SUPER ELASTIC DOUBLE COMPONENT WATER INSULATION MORTAR
Based cement and mineral filler, including acrylic dispersion, two-component, polymer and silicone, flexible, waterproof material. All kinds of concrete and plaster can be applied to ensure water tightness. Deformations due to high elasticity is not affected. Into and out of buildings waterproofing, crack repair, repairs, corrosion prevention procedures is ideal. Terraces, balconies, storage, screen and retaining walls, foundations, basements, swimming pools, bridges can be used easily. Not be exposed to direct sunlight. Loose mortar (20 kg) of liquid component (10 kg) used in combination. Application is made at least 2 coats, 2-6 sales should be expected between the two coats, second coat is applied perpendicular to the first floor. Application of the surface dries, the tile, tiles and so on. bonded flooring materials.
The product shelf life, dry environment in original packaging is 6 months. Appearance: White, Grey Powder White liquid Packaging: 20 kg kraft bags + 10 kg plastic drum Total 30 kg setConsumption: 1.5 to 2 kg / m² (for each floor)
Water
Insulation
Plaster..
Water and HumiditySubject to
Bathroom, KitchenShower WC v.s. for
CONSTRUCTION CHEMICALS
Semi-Elastic
Dual Component
Powder Component
Water Insulation Plaster..
Water and HumiditySubject to
Bathroom, KitchenShower WC v.s. for
CONSTRUCTION CHEMICALS
Semi Elastic Dual Component
Powder Component
Water Insulation Plaster..
CONSTRUCTION CHEMICALS
Semi Elastic Dual Component
Powder Component
20 kg Powder Component + 10 kg of liquid Component Set Price
White Grey
20 kg Powder Component + 10 kg of liquid Component Set Price
new
Water
Insulation
Plaster..
CONSTRUCTION CHEMICALS
Semi-Elastic
Dual Component
Powder Component
20 kg Powder Component + 5 kg of liquid Component Set Price
White
20 kg Powder Component + 5 kg of liquid Component Set Price
Grey new
MAXICOLL HALF- ELASTIC DOUBLE COMPONENT WATER INSULATION MORTARCement and mineral filler based, acrylic emulsion, containing two-component, polymer and silicon-doped, semi-flexible waterproofing material. All kinds of concrete and plaster can be applied to ensure water tightness. Exposed to water and moisture bathroom, kitchen, shower, wc fields such as water is applied in order to provide insulation. Very high water pressure in places that are not recommended for use. Not be exposed to direct sunlight. Loose mortar (20 kg), the liquid component (5 kg) used in combination. If the application is made at least 2-fold. 2-6 sales should be expected between the two coats, second coat is applied perpendicular to the first floor. Application of the surface dries, the tile, tiles and so on. bonded flooring materials.
The product shelf life, dry environment in original packaging is 6 months. Appearance: White, Grey Powder White liquid Packaging: 20 kg kraft bags + 5 kg plastic drum Total 25 kg setConsumption: 1.5 to 2 kg / m² (for each floor)
MAXICOLL MULTI-PURPOSE MORTAR ADDITIVE Styrene acrylic-based, cement and other fillers compatible , in liquid form ready for use dispersion. Together increases the strength of adhesion of the product is used. together with Maxicoll Extra Adhesive, Maxicoll Flex Adhesive, Maxicoll Flex Mortar Adhesives and Maxicoll Ultra-Flex Adhesive;it is ideal for Ceramic over ceramic tiles , granite, porcelain bonding, ceramic over gypsum board bonding, fiber cement board over ceramic tiles, chipboard bonding, chipboard over ceramic applications, swimming pool and pool hull isolation .Maxicoll Multi-purpose mortar additive is added to mortar 25 kg dust to 2,5-4 kg additive ratio . Consistency of the mortar is set with water. If you have absorbing properties of the surface (particularly gypsum board, fiber cement board substrates), using a brush to the surface Maxicoll Multi-purpose mortar additive is applied in a single layer (650-750 g/m²). Then dispersed mortar applied to the surface.
The product shelf life, dry environment, the original packaging is 6 months. Appearance: White liquid Package: 20, 10 and 5 kg plastic drumsConsumption: 0.2-0.3 kg / m² (application may vary according to surface conditions)
MAXICOLL SURFACE LEVELLING PRIMERStyrene acrylic based adhesion promoter, cement and other fillers compatible with all of the liquid dispersion form, ready for use. Alum covered surfaces with the surface to increase adherence and hence better adhesion to the surface to ensure that the alum is applied. In addition, the surface water absorption property is removed, can also be applied before application of plaster.
The product shelf life, dry conditions, for 6 months in original packaging. Appearance: White Liquid Packaging: 20, 10 and 5 kg plastic drums Consumption: 0.2-0.3 kg / m 2 (application may vary according to surface conditions)
MAXICOLL 0-6 mm FUGA JOINT FILLER White cement and fine mineral based joint filler that increase product performance, cracking, corrosion resistance to joint filler containing chemical additives. Water resistant. Resistant to cracking in joints between 0-6 mm, bending and compressive strength is high, suitable for bathrooms and kitchens, servants, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.
The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20, 10, 5 kg kraft bags Consumption (see Table-1): 0-6 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg , 5,5-6 lt water
MULTI-PURPOSE CONTRIBUTION CHARGES
CONSTRUCTION CHEMICALS
MULTI-PURPOSE CONTRIBUTION CHARGES
CONSTRUCTION CHEMICALS
MULTI-PURPOSE CONTRIBUTION CHARGES
CONSTRUCTION CHEMICALS
new
5 lt. 10 lt. 20 lt.
PRIMER SURFACE LEVELLING
CONSTRUCTION CHEMICALS
PRIMER SURFACE LEVELLING
CONSTRUCTION CHEMICALS
PRIMER SURFACE LEVELLING
CONSTRUCTION CHEMICALS
new
5 lt. 10 lt. 20 lt.
CONSTRUCTION CHEMICALS
0-6mmCERAMIC - TILE
GRANITE - PORCELAIN
JOINT FILLER
TYPE CG1
COLOR
White
Weight ColorWhite
Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/
Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked
BrownGreenWhite
Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/
Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked
BrownGreenWhite
Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/
Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked
BrownGreen
MAXICOLL 3-15 MM FLEX FUGA JOINT FILLERWhite cement, fine mineral and extra polymer based joint filler that increase product performance, cracking, corrosion resistance to joint filler containing chemical additives. Water resistant. Resistant to cracking in joints between 3-15 mm, bending and compressive strength is high, suitable for bathrooms and kitchens, servants,shopping centers, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.
The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20, 10, 5 kg kraft bags Consumption (see Table-2): 3-15 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg , 5,5-6 lt water
MAXICOLL 3-20 mm ULTRA FLEX SILICONE JOINT FILLER
White cement, fine mineral and extra polymer based joint filler that increase product performance, cracking, corrosion resistance to joint filler containing chemical additives. High Water resistant. Resistant to cracking in joints between 3-20 mm, bending and compressive strength is so high, suitable for bathrooms and kitchens, servants,shopping centers,swimming pools, hospitals, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.
The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20, 10, 5 kg kraft bags Consumption (see Table-3): 3-20 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg , 5,5-6 lt water
CONSTRUCTION CHEMICALS
flex fuga3-15 mm
CERAMIC - TILEGRANITE - PORCELAIN
MARBLE - NUTEREL STONE
JOINT FILLER
TYPE CG2WA
COLOR
White
Weight ColorWhite
Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/
Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked
BrownGreenWhite
Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/
Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked
BrownGreenWhite
Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/
Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked
BrownGreen
Weight ColorWhite
Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/
Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked
BrownGreen/Black
WhiteIvory/Beige/Pink/Grey
Fawn/Verification Beige/Dark Grey/Lilac/Ice Blue/Purple/Cinnamon/Smoked/Orange
Pistachio Green/Dark SmokedBrown
Green/BlackWhite
Ivory/Beige/Pink/GreyFawn/Verification Beige/Dark Grey/Lilac/Ice Blue/
Purple/Cinnamon/Smoked/OrangePistachio Green/Dark Smoked
BrownGreen
CONSTRUCTION CHEMICALS
ultra flex silicon fuga
3-20 mm
TYPE CG2WA
COLOR
White
MAXICER STANDARD ADHESIVE
Ceramics / Tile
Cement and mineral filler based on the product's performance and operation (application) that contains chemical additives to increase the duration of a single-component ceramic, tile adhesive mortar. Indoors, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-based surfaces can be used easily. Minimum of 3% water absorption, is an ideal product for small and medium-sized coating materials.
The product shelf life, dry environment, the original package is 12 months. Appearance: Grey, White PowderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of waterConsumption:4.5-5 kg/m²
STANDARD ADHESIVE MAXICER
Ceramics / Tile
Cement and mineral filler based on the product's performance and operation (application) that contains chemical additives to increase the duration of a single-component ceramic, tile adhesive mortar. Indoors, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-based surfaces can be used easily. Minimum of 3% water absorption, is an ideal product for small and medium-sized coating materials.
The product shelf life, dry environment, the original package is 12 months.Appearance : White Powder Packing : 25 kg \ 'health kraft bag £ 9:40 Water Mixture Rate: 25 kg of dust from 6.5 to 7.5 Push WaterConsumption : 4.5-5 kg /m²
MAXICER INDOOR FLEX GREY ADHESIVE
Ceramic / Tile / Granite
Cement, mineral filler and polymer based high adhesion strength, single component, flexible, ceramic, tile, granite, adhesive mortar that contains chemical additives to increase the open-time and the performance and reduce slippage of the product.Interior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-based substrates, the human density is more than shopping-business centers, hospitals, schools can be used in such places. Excellent adhesion to all surfaces.
The product shelf life, dry environment, the original package is 12 months.Appearance: Grey PowderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of waterConsumption:5-6 kg/m² (back of the big size tiles must be covered with mortar)
CONSTRUCTION CHEMICALS
STANDARD GRAY
CERAMIC - TILE
ADHESIVE
TYPE C1T
CONSTRUCTION CHEMICALS
STANDARD WHITE
CERAMIC - TILE
ADHESIVE
TYPE C1T
new
CONSTRUCTION CHEMICALS
FLEX INDOOR
CERAMIC - TILE- GRANITEREINFORCED POLYMER
ADHESIVEGrey Interior
TYPE C2TE
MAXICER INDOOR FLEX WHITE ADHESIVE
Ceramic / Tile / Granite
Cement, mineral filler and polymer based high adhesion strength, single component, flexible, ceramic, tile, granite, adhesive mortar that contains chemical additives to increase the open-time and the performance and reduce slippage of the product.Interior, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-based substrates, the human density is more than shopping-business centers, hospitals, schools can be used in such places. Excellent adhesion to all surfaces.
The product shelf life, dry environment, the original package is 12 months.Appearance: White PowderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of waterConsumption:5-6 kg/m²(back of the big size tiles must be covered with mortar)
MAXICER OUTDOOR FLEX GREY ADHESIVE
Ceramic / Tile / Granite / Porcelain
Cement, mineral filler and extra polymer based high adhesion strength, single component, flexible, ceramic, tile, granite, porcelain adhesive mortar that contains chemical additives to increase the open-time and the performance and reduces slippage of the product. Due to high thixotropic property of the last inserted resistance against slipping.Outdoor, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-based surfaces exposed to heavy traffic floors, balconies, terraces, shops, sidewalks and squares can be used in coatings. Excellent adhesion to all surfaces.
The product shelf life, dry environment, the original package is 12 months.Appearance: Grey PowderPackaging: 25 kg kraft bagWater mixing ratio: Dust, 25 kg, 6.5 7.5 liter of waterConsumption:5-6 kg/m² (back of the big size tiles must be covered with mortar)
MAXICER OUTDOOR FLEX WHITE ADHESIVE
Ceramic/ Tile / Granite / Porcelain
Cement, mineral filler and extra polymer based high adhesion strength, single component, flexible, ceramic, tile, granite, porcelain adhesive mortar that contains chemical additives to increase the open-time and the performance and reduces slippage of the product. Due to high thixotropic property of the last inserted resistance against slipping.Outdoor, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, grout, and cement-based surfaces exposed to heavy traffic floors, balconies, terraces, shops, sidewalks and squares can be used in coatings. Excellent adhesion to all surfaces.
The product shelf life, dry environment, the original package is 12 months.Appearance: White PowderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of waterConsumption:5-6 kg/m² (back of the big size tiles must be covered with mortar)
CONSTRUCTION CHEMICALS
FLEX ADHESIVE
CERAMIC - TILE- GRANITEREINFORCED POLYMER
ADHESIVEGrey Interior White
TYPE C2TE
FLEX ADHESIVE
CERAMIC - TILE- GRANITEPORCELAIN
OUTDOOR
TYPE C2TE
EXTRAREINFORCED POLYMER
CONSTRUCTION CHEMICALS
FLEX ADHESIVE
CERAMIC - TILE- GRANITEPORCELAIN
Outdoor
TYPE C2TE
EXTRAREINFORCED POLYMER
CONSTRUCTION CHEMICALS
MAXICER CELLULAR CONCRETE/BIMS BRICK KNITTING MORTAR
Cement, mineral filler and polymer based adhesion strength, single component, cellular concrete, porous stone brick, stone slabs, paving stones, bricks sticking to products, knitting mortar that contains chemical additives to increase the open-time and the performance of the product.Cellular concrete water-absorbing property such as interior and exterior structural elements of the weave with a high ideal. The application surface must be repaired with MaxicER Repair Mortar . The product shelf life, dry environment in original packaging is 6 months.
Appearance: Grey powderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5- 7.5 liter of waterConsumption: 6-8 kg / m² for the dimensions of 20x50x20 cellular concrete
MAXICER GLASS BRICK KNITTING MORTAR
Glass Brick / BTB / Glass Mosaic White White cement and mineral filler-based, polymer additive, single-component, paste, and plastering (for joints) mortar. Product performance and operation (application) contains chemical additives to increase the duration. Glass laying bricks glued on top of all the BTB and the types of glass mosaic and glue used to fill joints.
The product shelf life, dry environment in original packaging is 6 months.Appearance: White powderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6- 7 liter of waterComsumption:2 kg / m 2 to 8 mm in thickness of the joint
MAXICER THIN AND THICK REPAIR MORTAR
Repair Mortar
Cement and mineral filler based, fiber reinforced, polymer-reinforced, high-strength, one component repair mortar repair. -1 mm in thickness of the thin repair mortar for Grain, for thick repair mortar - 4 mm is. Interior and exterior, concrete, plaster, cement and so on. structure of the floors and walls for cracks, wear, and filling gaps, repair, reinforcement and strengthening of the weak and worn surfaces, as a result of erosion of reinforcement bars are used to repair damaged concrete. 3-20 mm in thickness for thin repair mortar, a thick repair mortar for the 5 - 40 mm. Very humid or very hot weather, making the application should be avoided as much as possible. The product shelf life, dry environment, the original package is 6 months.
Appearance: Grey Powder Packing: 25 kg kraft bags Water Mixing Ratio: Dust, 25 kg, 5- 5,5 liter of waterComsumption:1,6 kg/m² (for 1 mm thickness)
FLEX ADHESIVE
BONDING MORTAR KNITTING
GAS CONCRETE BRICK BIMS
REINFORCED POLYMER
CONSTRUCTION CHEMICALS
GLASS BRICKKNITTING MAXICER GLASS BRICK ADHESIVE MORTAR REINFORCED POLYMER
CONSTRUCTION CHEMICALS
new
REPAIR MORTARThin Mortar Repair
REINFORCED POLYMER
CONSTRUCTION CHEMICALS
Bag Price Thin/Grey
new new
REPAIR MORTARThick Mortar Repair
REINFORCED POLYMER
Bag Price Thin/Grey
MAXICER SELF LEVELLING GROUT Cement and mineral filler based, fast setting, self-leveling, high-strength floor leveling mortar. All interior surfaces of buildings exposed to medium and heavy traffic in the last floor coating alum pre-leveling, as well as domestic fronts, ceramic, marble , tile, PVC, laminates, parquet floor before such applications are to fix. 60 minutes before administration of foot and mouth Maxicer surface must be primed with Primer Levelling Surface Bonding Enhancer. Medium-density surfaces, thickness 2-10 mm, 5-20 mm high-density surfaces .The product shelf life, dry environment in original packaging is 6 months.
Appearance: Grey Powder Packing: 25 kg kraft bags Water Mixing Ratio: Dust, 25 kg, 5- 5,5 liter of waterComsumption:1.5 kg/m² (for 1 mm thickness)
MAXICER MULTI-PURPOSE MORTAR ADDITIVE Styrene acrylic-based, cement and other fillers compatible , in liquid form ready for use dispersion. Together increases the strength of adhesion of the product is used. together with Maxicer İndoor Flex Adhesive, Maxicer Outdoor Flex Adhesives it is ideal for Ceramic over ceramic tiles , granite, porcelain bonding, ceramic over gypsum board bonding, fiber cement board over ceramic tiles, chipboard bonding, chipboard over ceramic applications, swimming pool and pool hull isolation .Maxicer Multi-purpose mortar additive is added to mortar 25 kg dust to 2,5-4 kg additive ratio . Consistency of the mortar is set with water. If you have absorbing properties of the surface (particularly gypsum board, fiber cement board substrates), using a brush to the surface Maxicer Multi-purpose mortar additive is applied in a single layer (650-750 g/m²). Then dispersed mortar applied to the surface.
The product shelf life, dry environment, the original packaging is 6 months. Appearance: White liquid Package: 20 - 10 and 5 kg plastic drums
MAXICER SURFACE LEVELLING PRIMERStyrene acrylic based adhesion promoter, cement and other fillers compatible with all of the liquid dispersion form, ready for use. Alum covered surfaces with the surface to increase adherence and hence better adhesion to the surface to ensure that the alum is applied. In addition, the surface water absorption property is removed, can also be applied before application of plaster.
The product shelf life, dry conditions, for 6 months in original packaging. Appearance: White Liquid Packaging: 20, 10 and 5 kg plastic drums Consumption: 0.2-0.3 kg / m² (application may vary according to surface conditions)
SELF LEVELLING GROUT
Floor Leveling Tool
CONSTRUCTION CHEMICALS
new
new new newMULTI-PURPOSE MORTAR ADDITIVE
CONSTRUCTION CHEMICALS
5 lt. Drum 10 lt. Drum 20 lt. Drum
CONSTRUCTION CHEMICALS
CONSTRUCTION CHEMICALS
new new
new
MULTI-PURPOSE CONTRIBUTION CHARGES
CONSTRUCTION CHEMICALS
SURFACE LEVELLING PRIMER
5 lt. Drum 10 lt. Drum 20 lt. Drum
MULTI-PURPOSE MORTAR ADDITIVE
MULTI-PURPOSE MORTAR ADDITIVE
CONSTRUCTION CHEMICALS
SURFACE LEVELLING PRIMER
CONSTRUCTION CHEMICALS
SURFACE LEVELLING PRIMER
MAXICER 0-6 MM FUGA JOINT FILLER
White cement and fine mineral based joint filler that increase product performance, cracking, corrosion resistance to joint filler containing chemical additives. Resistant to cracking in joints between 0-6 mm, bending and compressive strength, suitable for bathrooms and kitchens, servants, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.
The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20, 10, 5 kg kraft bags Consumption (see Table-1): 0-6 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg 5,5-6 lt water
MAXICER 3-15 MM FLEX FUGA JOINT FILLER
White cement, fine mineral and extra polymer based joint filler that increase product performance, cracking, corrosion resistance to joint filler containing chemical additives. Water resistant. Resistant to cracking in joints between 3-15 mm, bending and compressive strength is high, suitable for bathrooms and kitchens, servants, shopping centers, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.
The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20-10-5 kg kraft bags Consumption (see Table-2): 3-15 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg 5 5-6 lt water
FUGA 0-6 mm
JOINT FILLERCeramic / Tile
CONSTRUCTION CHEMICALS
White
TYPE CG2WA
WhiteIvory/Beige/Grey
Fawn/Verification Beige/Dark Grey/Smoked
Weight Color
WhiteIvory/Beige/Grey
Fawn/Verification Beige/Dark Grey/Smoked
WhiteIvory/Beige/Grey
Fawn/Verification Beige/Dark Grey/Smoked
WhiteIvory/Beige/Grey
Fawn/Verification Beige/Dark Grey/Smoked
Weight Color
WhiteIvory/Beige/Grey
Fawn/Verification Beige/Dark Grey/Smoked
WhiteIvory/Beige/Grey
Fawn/Verification Beige/Dark Grey/SmokedFLEX FUGA 3-15 mm
JOINT FILLINGCeramic / Tile / Granite
CONSTRUCTION CHEMICALS
White
TYPE CG2WA
TECH-USTA STANDARD GREY ADHESIVE
Ceramic / Tile
Cement and mineral filler based single-component ceramic, tile adhesive mortar. All kinds of concrete, plaster, alum can be used in cement based substrates. Minimum of 3% water absorption, is an ideal product for small and medium-sized tiles.
The product shelf life, dry environment, the original package is 12 months. Appearance: Grey, White PowderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5 - 7 liter of waterConsumption:4.5-5 kg/m²
TECH-USTA FLEX ADHESİVE
Ceramic / Tile
Cement and mineral filler based single-component ceramic, tile adhesive mortar that contains chemical additives to increase the open-time and the performance of the product.
Indoor and outdoor, wall and floor, wet and dry surfaces, all kinds of concrete, plaster, alum can be used in cement-based substrates. Minimum of 3% water absorption, is an ideal product for small and medium-sized tiles.
The product shelf life, dry environment, the original package is 12 months. Appearance: Grey, White PowderPackaging: 25 kg kraft bagWater Mixing Ratio: Dust, 25 kg, 6.5 7.5 liter of waterConsumption:4.5-5.5 kg/m²
TECH-USTA HEAT INSULATION BOARD ADHESIVE EPS / XPS / ROCKWOOL / GLASS WOOL
Cement and mineral filler based, polymer-reinforced, heat insulation board adhesive .All kinds of internal and external fronts in order to provide thermal insulation EPS, XPS, stone wool, glass wool as thermal insulation panels used for bonding. Each kind of plaster, concrete, bricks, cellular concrete, pumice, brick, brick and so on. structural elements can be applied over. The product shelf life, dry environment, the original package is 12 months. Appearance: Grey Powder Packing: 25 kg kraft bags Water Mixing Ratio: Dust, 25 kg, 6- 6,5 liter of waterComsumption:4-4.5 kg/m² (it can be changed according to surface properties)
CONSTRUCTION CHEMICALS
TYPE C1T
GRAYADHESIVE
CERAMIC / TILE
CONSTRUCTION CHEMICALS
WHITEADHESIVE
CERAMIC / TILE
TYPE C1T
Bag Price Grey Bag Price White
CONSTRUCTION CHEMICALS
HEAT INSULATION ADHESIVE SHEET
EPS, XPS, ROCKWOOLFOR GLASS WOOL
WRAPPING PLASTERDOPED FIBER
CONSTRUCTION CHEMICALS
TYPE C1TE
FLEX GRAYADHESIVE
CERAMIC / TILE
CONSTRUCTION CHEMICALS
FLEX WHITEADHESIVE
CERAMIC / TILE
TYPE C1TE
Bag Price Grey Bag Price White
Bag Price Grey
TECH-USTA HEAT INSULATION BOARD PLASTER EPS / XPS / ROCK WOOL / GLASS WOOL
Cement and mineral filler based, fiber reinforced, polymer-reinforced heat insulation board plaster. interior and exterior EPS, XPS, Rock Wool, Glass Wool Heat insulation panels, such as plaster is applied for two floor on the surface. before first floor plaster dries, file is applicated on the plaster. For the second floor application must be wait for 3-4 hours.
The product shelf life, dry environment, the original package is 12 months. Appearance: Grey Powder Packing: 25 kg kraft bags Water Mixing Ratio: Dust, 25 kg, 6- 6,5 liter of waterComsumption:4-4.5 kg/m² (it can be changed according to surface properties)
TECH-USTA THIN PLASTER
Based cement and mineral filler, polymer additives, plaster can be applied easily. Interior and exterior, wall and ceiling, concrete surfaces ready to paint as the last layer of plaster is used. Each layer of 3-5 mm thickness of the application must be about to plaster.
Of the product shelf life, dry environment, the original package is 12 months. Appearance: Grey Powder Packing: 25 kg kraft bags Water Mixing Ratio: Dust, 25 kg, 7-9 liter of waterComsumption:1,4-1,6 kg/m² (for 1 mm thickness)
TECH USTA MACHINE PLASTER
Based cement and mineral filler, chemical binding machine reinforced plaster. Because of the chemical additives found inside, no air entrains , creates ease of application. Internal and external fronts, brick, aerated concrete, brick wall, pumice, concrete, the ceiling is applied to surfaces such as machine.
The product shelf life, dry environment, the original package is 12 months.Appearance: Grey, White Powder Packing: 25 kg kraft bags Water Mixing Ratio: Dust, 25 kg, 4,5-5 liter of waterComsumption: 12,5 kg/m²
CONSTRUCTION CHEMICALS
HEAT INSULATION PLASTER PLATE
EPS, XPS, ROCKWOOLFOR GLASS WOOL
WRAPPING PLASTERDOPED FIBER
CONSTRUCTION CHEMICALS
THIN PLASTER
new
new new
CONSTRUCTION CHEMICALS
MACHINEPLASTER
GREY
Bag Grey
CONSTRUCTION CHEMICALS
MACHINEPLASTER
WHITE
Bag White
TECH-USTA 0-6 MM FUGA JOINT FILLER
White cement and fine mineral based joint filler that resistant to cracking in joints between 0-6 mm, suitable for bathrooms and kitchens, servants, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.
The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20 kg kraft bags Consumption (see Table-1): 0-6 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg , 5,5-6 lt water
TECH-USTA 3-15 MM FLEX FUGA JOINT FILLER
White cement, fine mineral and polymer based joint filler that increase product performance, cracking, corrosion resistance to joint filler containing chemical additives. Resistant to cracking in joints between 3-15 mm, suitable for bathrooms and kitchens, servants, ceramic, granite, marble floors are ideal. Wide range of colors available. After application the surface, can be opened for use after 24-48 hours.
The product shelf life, dry conditions, in original packaging 12 months. Appearance: White or colored a very fine-grained powder. Packaging: 20 kg kraft bags Consumption (see Table-2): 3-15 mm the theoretical Joint consumption tableWater Mixing Ratio: dust 20 kg ,5,5-6 lt water
CONSTRUCTION CHEMICALS
FUGA 0-6 mmJOINT FILLER
CERAMIC / TILE
TYPE CG1
Weight Color
WhiteIvory/Beige/Grey
Fawn/Verification Beige/Dark Grey/Smoked
CONSTRUCTION CHEMICALS
FLEX FUGA 3-15 mmJOINT FILLER
CERAMIC / TILE / GRANITE
TYPE CG2
Weight Color
WhiteIvory/Beige/Grey
Fawn/Verification Beige/Dark Grey/Smoked
Joint Filler Colors
White Grey Dark Grey Smoked Smoky
Black Ivory Beige Light Beige Fawn
Brown Cinnamon Yellow Orange Pink
Purple Lila Ice Blue Pistachio Green Green
THEORETICAL JOINT CONSUMPTION TABLES
Table-1
Ceramic Size
Table-2
Ceramic Size
Table-3
Ceramic Size
CONSTRUCTION CHEMICALS
Central (Factory)
(Manufacturing Plant)(Manufacturing Plant)
Phn:Phn:
Phn: