matubo - návod - superduo™ - snowflake
TRANSCRIPT
7/25/2019 Matubo - návod - SUPERDUO™ - Snowflake
http://slidepdf.com/reader/full/matubo-navod-superduo-snowflake 1/1
Superduo rope1)
String five Superduo beads. Tie a square
knot to form a circle. Then pass through the
second hole of one of the Superduo beads
next to the knot
2)
Add one Superduo bead. Pass
through the second hole of the next
Superduo bead from the first row.
Repeat five times. At the end of the
row, you have to pass through the first
hole and then the second hole of the
first Superduo bead of this row. This isthe step-up. Remember that after
each "step-up", you will have to work
in an opposite direction.
3)
This row is similar to the previous one.
Add one Superduo bead and pass
through the second hole of the next
Superduo from the previous row.
Repeat until you finish the round. Forthe step-up, you need to pass through
the first hole and then through the
second hole of the first Superduo of
this row.
4)
Repeat steps 2 and 3 until you reach
the desired length. In the last row, do
the step-up and then pass throughthe second holes of all the Superduos
in the last row. Tie a few half-hitch
knots and cut off the remaining
thread.
You can finish the rope by adding bead caps. You can also make a
few shorter segments of this rope and use them as beaded beads.
Material and supplies:Superduo Beads (20 grams for a
bracelet, 40 - 60 grams for a necklace)
Beading needle
Thread (Fireline)
Optional:Jewelry findings (eyepins, bead caps, jumprings and a clasp)
Difficulty: Beginners
Technique: Peyote stitch
You can also use more colors of Superduos and create a
patterned rope.
End of the finished rope.
Design and tutorial by Nela K á belov á (www.gianelle.beadforum.cz)
For personal use only. www.matubobeads.com