materials testing with a high-q rf cavity sami tantawi, christopher nantista, valery dolgashev,...
TRANSCRIPT
![Page 1: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/1.jpg)
Materials Testing With a High-Q RF Cavity
Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden,
Ricky Campisi, T. Tajima, and P. Kneisel
Work supported by the U.S. Department of Energy under contract DE-AC02-76SF00515.
![Page 2: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/2.jpg)
Superconducting rf is of increasing importance in particle accelerators. We have developed a resonant cavity with high quality factor and an interchangeable wall for testing of superconducting materials. A compact TE01 mode launcher attached to the coupling iris selectively excites the azimuthally symmetric cavity mode, which allows a gap at the detachable wall and is free of surface electric fields that could cause field emission, multipactor, and rf breakdown. The shape of the cavity is tailored to focus magnetic field on the test sample. We describe cryogenic experiments conducted with this cavity. An initial experiment with copper benchmarked our apparatus. This was followed by tests with Nb and MgB2. In addition to characterizing the onset of superconductivity with temperature, our cavity can be resonated with a high power klystron to determine the surface magnetic field level sustainable by the material in the superconducting state. A feedback code is used to make the low level RF drive track the resonant frequency. We will also use our resonant cavity design to study the effects of high power pulsed heating on normal conducting surfaces.
Abstract
![Page 3: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/3.jpg)
Finding the Right Cavity Shape
TE01n pillbox
(field same on top and bottom)
![Page 4: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/4.jpg)
The Mushroom Cavity
57.1% peak54.5% peak
|Hs|
contour (inches)bottom plate
r = 0.98”
|E|TE013-like mode
|H|
Q0 = ~44,000 (Cu, room temp.)
material sample
Features:
•No surface electric fields (no multipactor)
•Magnetic field concentrated on bottom (sample) face (75% higher than anywhere else)
•Purely azimuthal currents allow demountable bottom face (gap).
Why X-band (~11.424 GHz)?:
•high power & rf components available
•fits in cryogenic dewar
•small (3”) samples required
axis
peak
![Page 5: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/5.jpg)
6.8% mode separation for axisymm. TE modes.
4.0% mode separation from axisymm. TM mode.
1.4% mode separation from non-axisymm. mode.
Other Nearby Resonance Modes:
TE131TM32?
WC150 (3.81 cm diam.)
Couple on axis with pure axisymmetric tranverse electric mode TE01 in circular waveguide.
![Page 6: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/6.jpg)
copper plug
temperature sensor
WC150
Cu
Mechanical Design
Sample Dimensions
ss Conflat flanges
G. Bowden
![Page 7: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/7.jpg)
WR90-WC150 Compact High-Purity TE01 Mode Launcher
height taper (.400”.800”)
planar TE10TE20 converter
rect.-to-circ. TE20TE01 mode converter WC150
WR90
V. Dolgashev
TE10
TE01
![Page 8: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/8.jpg)
mode converter
cavity
Cryogenic Dewar
different cavity
vacuum can removed
(cavity immersed in liquid He)
inner diameter ~1 ft.
Assembly
WR90 waveguide
![Page 9: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/9.jpg)
HFSS (Cu) Copper Niobium
fr 11.424 11.4072 11.4061
QL 30,991 29,961 20,128
0.4383 0.4611 0.2728
Q0 44,575 43,775 25,619
Qe 101,694 94,944 93,906
“Cold” Tests (Room Temperature)
HP 8510C Network AnalyzerNb sample mounted in bottom flange
room temp. measurements
![Page 10: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/10.jpg)
Phase slew due to input waveguide, determined from a 50 MHz measurement is subtracted from 1 MHz data.
A “Q circle” is fit to the corrected S11 data in the complex plane to determine fr, , and QL are determined.
From these Q0 and Qe are derived.
Processing Cold Test Data
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
-0.1
0
0.1
0.2
0.3
0.4
0.5
Real
Imag
inar
y
11.415 11.4152 11.4154 11.4156 11.4158 11.416 11.41620.45
0.5
0.55
0.6
0.65
0.7
0.75
0.8
frequency (GHz)
|S11
|
11.39 11.4 11.41 11.42 11.43 11.44 11.45-150
-100
-50
0
50
100
150
200
Frequency (GHz)
S11
Pha
se B
efor
e (b
lue)
and
Aft
er (
gree
n) C
orre
ctio
n
Temperature measured with a carbon-glass resistor (low end) inserted into a hole in bottom of cavity and from frequency shift (higher temperatures).
Complex S11 is measured with 1601 points in 1 megaherz around resonance.
![Page 11: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/11.jpg)
11.405 11.41 11.415 11.42 11.425 11.43 11.435 11.44 11.445 11.4520
40
60
80
100
120
140
160
180
200
Resonant Frequency (GHz)
Q0 (
red)
, Q
e (bl
ue),
and
QL(g
reen
) /1
000
0 50 100 150 200 250 3000
20
40
60
80
100
120
140
160
180
200
Temperature (K)
Q0 (
red)
, Q
e (bl
ue),
and
QL(g
reen
) /1
000
0 50 100 150 200 250 3000
50
100
150
200
250
300
350
Temperature (K)
Q0 (
red)
, Q
e (bl
ue),
and
QL(g
reen
) /1
000
11.405 11.41 11.415 11.42 11.425 11.43 11.4350
50
100
150
200
250
300
350
Resonant Frequency (GHz)
Q0 (
red)
, Q
e (bl
ue),
and
QL(g
reen
) /1
000
Q0: 44,000 190,300
Q0: 25,600 330,700
Copper Sample
Niobium Sample
![Page 12: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/12.jpg)
9.3 K
0
5
10
15
20
25
30
35
40
-100
-50
0
50
100
13 14 15 16 17 18 19 20 21
Q0/10000Temperature (K)
Resonant Frequency
Q0/1
04 and
Tem
pera
ture
(K
)R
esonant Frequency - 11.434 GH
z (kHz)
Time (hours)
Transition of Cavity Q During Warmup from Liquid He Temperature
0
5
10
15
20
25
30
35
40
-100
-50
0
50
100
13 14 15 16 17 18 19 20 21
Q0/10000
Temperature (K)
Resonant Frequency
Q0/1
04 and
Tem
pera
ture
(K)
Resonant Frequency - 11.434 G
Hz (kH
z)
Time (hours)
![Page 13: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/13.jpg)
Needed Power
H field along radius of bottom face
56.76%
U=8.72265×10-17 J
|Hmax|2 = 4.1048×10-6 A2/m2
|Hmax|2 = AU
A = 4.7059×1010 A2/m2/J
If |Bc|=180 mT, then |Hc|=143.25 kA/m,
Uc 0.43607J = 8.754×10-7s Pc
for a 1.5 s flat input pulse.
Pc 498 kW
0 1 2 3 4 5 60
1
2
3
4
5
6
7
8
9x 10
-7
Time (microseconds)
U/P
(s)
![Page 14: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/14.jpg)
New test setup for inexpensive accurate characterization of high-field RF properties of materials and processing techniques
3 104
4 104
5 104
6 104
7 104
8 104
-30
-25
-20
-15
-10
-5
0
5
0.01 0.1 1
Q
f (kHz)
QkH
z
Power (MW)
High Power Test of Niobium at 4.2K
![Page 15: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/15.jpg)
High Power Testing
An initial high power experiment was performed, but data has not yet been fully analyzed.
A feedback code is used to make the low level RF drive track the resonant frequency by flattening the phase during cavity discharge.
Quenching of Nb sample seen as a roll off of Q as power was raised.
Our experimental setup is still maturing. We will add a high-power circulator to isolate the klystron from the cavity reflection. We will also add a silicon diode and a Cernox temperature sensor.
We will soon test a sample of MgB2 provided by T. Tajima et al. of Los Alamos. This material is supposed to have an order of magnitude lower surface resistance than niobium at 4K and a critical temperature of ~40K, compared to 9.2K for niobium.
![Page 16: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/16.jpg)
Pulsed Heating
HFSS Meas.
f 11.424 11.4073
QL 22,544* 21,197
1.0015* 1.0659
Q0 45,123 43,791
Qe 45,054 41,084
=1.032,
Tc=0.5915s
0 0.5 1 1.5 2 2.5 30
1
2
3
4
5
6x 10
-7
Time (microseconds)
U/P
(s)
5.175×10-7
Room Temperature DesignStored Energy / Input Power (J/W)
Our cavity design also recommends itself to pulsed heating experiments (á la Pritzkau and Siemann).
We will conduct a set of such experiments, using a second cavity designed to be nearly critically coupled at room temperature.
These will be done in collaboration with W. Wuench, et al. of CERN, who will provide samples of copper, copper zirconium, etc.
![Page 17: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/17.jpg)
2
||
20
0
2
1)(
)'(2
erfc)'(4
exp1)'(
'2
),0(
Hs
dd
t
RdA
tdP
tttt
dA
tdPdt
cTtzT
/J/mA 104.7059 ,
0279.02
1resistance surface
(@350K) /sm10127.1ydiffusivit thermal
μm618.02
depthskin
(@350K)J/kgK 6.392strainconstant at heat specific
kg/m 8930density
22102
||
24
3
AAU
R
c
s
d
H
0 0.5 1 1.5 2 2.5 3 3.50
1
2
3
4
5
6
7
8
9
Time (microseconds)
Pul
sed
Tem
pera
ture
Ris
e (K
/MW
)
11.92 MW 100°C
Cu parameters held constant in this calculation.
(Pritz. (3.34))
We have plenty of power to create pulsed heating temperature rises on the order of 100 °C.
![Page 18: Materials Testing With a High-Q RF Cavity Sami Tantawi, Christopher Nantista, Valery Dolgashev, Gordon Bowden, Ricky Campisi, T. Tajima, and P. Kneisel](https://reader036.vdocuments.us/reader036/viewer/2022062322/56649ea95503460f94bacde0/html5/thumbnails/18.jpg)
Conclusions
•We have designed and fabricated a compact, high-Q rf cavity optimized for economically testing the rf properties of material samples and their dependence on temperature and field by means of frequency and Q monitoring.
•We’ve performed low power cryogenic tests with copper and niobium samples.
•High power tests are under way.
•A similar cavity will be used for pulsed heating material testing.