materials - pat bravo · 2015. 2. 18. · artgalleryfabrics.com note: if you will like to add the...
TRANSCRIPT
F R E E P A T T E R N
f e a t u r i n g E T N O C O L L E C T I O N B Y P A T B R A V O
F A B R I C S D E S I G N E D B Y P A T B R A V O
ETN-50046 DROPS OF PAMPLEMOUSSE
ETN-40047 LOOMING LOVE GEM
ETN-50047 LOOMING LOVE PASTE
ETN-50041 SHORE REMAINS TRINKETS
ETN-50044 DREAMS OF KANDACE
ETN-50049 INSTINCT BLOOMS CINDER
» Fat Eight of ETN-50041 » 5/8 yd of ETN-50049 » Fat Eight of ETN-50044 » Fat Eight of ETN-40047 » Fat Eight of ETN-50046 » Fat Eight of ETN-50047 » pom-poms trim (optional)
MATER IALS
FINISHED SIZE | 20"× 20"
PILLOW
ar tga l le ry fabr ics.com
FINISHED SIZE | 20"× 20"
CUTT ING D IRECT IONS
CONSTRUCT ION
PILLOW TOP
¼" seam allowances are included.WOF means width of fabric.
Sew all rights sides together with ¼"seam allowance.
DIAGRAM 1
DIAGRAM 2
FROM FABRIC A, CUT 1(One) 6 1/2” Square
FROM FABRIC B, CUT1 (One) 3” x 6 1/2” Strip1 (One) 3” x 9” Strip1 (One) 20 1/2” square
FROM FABRIC C, CUT1 (One) 1 1/2” x 9” Strip1 (One) 1 1/2” x 10” Strip1 (One) 1 1/2” x 16 1/2” Strip1 (One) 1 1/2” x 17 1/2” Strip
FROM FABRIC D, CUT1 (One) 2 1/2” x 10” Strip1 (One) 2 1/2” x 12” Strip
FROM FABRIC E, CUT1 (One) 5” x 12” Strip1 (One) 5” x 16 1/2” Strip
FROM FABRIC F, CUT1 (One) 3 1/2” x 17 1/2” Strip1 (One) 3 1/2” x 20 1/2”
•Begin with the 6 1/2” square from fabric A, one 3” X 61/2” strip from fabric B and one 3” x 9” strip from fabric B
•Attach the 3” x 6 1/2” strip from fabric B to the right side of the 6 1/2” square from fabric A.
•After the strip is attached to the square take the strip from fabric B that is left and attach it to the bottom of the square (DIAGRAM 1)
•Take one 1 1/2” X 9” strip from fabric C and one 1 1/2” x 10” strip from fabric C as well.
•Asdoneforthefirststep,attachtheshorteststriptothe rigth side of the square (1 1/2” x 9” strip)
•Then attach the longest strip to the bottom of the square (DIAGRAM 2)
•This pillow construction is very simple, continue adding strips as done in the steps before.
•Pick the ones with the same lenght and width of the previous sewn pieces or follow the cover picture for fabric placement.
•Continue Adding the strips until you are done with all the strips.
PILLOW
ar tga l le ry fabr ics.com
Note: If you will like to add the pom-poms place them and pin them in place inbetween the pillow top and back before sewing them together.
• Now that the pillow top is ready take the 20 1/2” square from fabric B for the back of the pillow.
•Place square B on top of the pillow top both facing right sides of the fabrics, make sure they are align.
•start sewing the squares all the way around with 1/4” seam allowance.
•Leave an opening of about 4” on the bottom to turn the pillow inside out.
•Turn the pillow over and iron it.
•Thepillowisreadytobefillwithapillowform.
•Close the bottom opening with a hand needle stitch
Sew here
To see more patterns, fabricsand lots of inspiration visit:
patbravo.com
DIAGRAM 3
DIAGRAM 4
NOTE: While all possible care has been taken to ensure the accuracy of this pattern, we are not responsible for printing errors or the way in which individual work varies.Please read instructions carefully before starting the construction of this quilt. If desired, wash and iron your fabrics before starting to cut.
ar tga l le ry fabr ics.com
© 2015 Courtesy of Art Gallery Quilts LLC. All Rights Reserved.