material selection

Upload: sivareddy-induri

Post on 07-Jan-2016

31 views

Category:

Documents


0 download

DESCRIPTION

Selection of Materials

TRANSCRIPT

  • ASME Design Code - Plate MaterialsFerrous Plate Materials

    Carbon Steel .................................................................................. 28-3Heat Treated Steel ......................................................................... 28-4Low Alloy Steel ............................................................................28-5High Alloy Steel ............................................................................ 28-7

    Non-Ferrous Plate Materials ........................................................... 28-8

    ASME Design Code - Clad Plate Materials ................................... 28-10

    ASME Design Code - Tube MaterialsFerrous Tube Materials

    Carbon Steel .................................................................................. 28-11Low Alloy Steel ............................................................................28-12High Alloy Steel ............................................................................ 28-13

    Non-Ferrous Tube Materials ............................................................ 28-14

    BS Design Code - Plate MaterialsFerrous Plate Materials

    Carbon Steel .................................................................................. 28-15Heat Treated Steel ......................................................................... 28-16Low Alloy Steel ............................................................................28-17High Alloy Steel ............................................................................ 28-19

    Non-Ferrous Plate Materials ........................................................... 28-20

    BS Design Code - Clad Plate Materials ......................................... 28-22

    BS Design Code - Tube MaterialsFerrous Tube Materials

    Carbon Steel .................................................................................. 28-23Low Alloy Steel ............................................................................28-24High Alloy Steel ............................................................................ 28-25

    Non-Ferrous Tube Materials ............................................................ 28-26

    JIS Design Code - Plate MaterialsFerrous Plate Materials

    Carbon Steel .................................................................................. 28-27Heat Treated Steel ......................................................................... 28-28Low Alloy Steel ............................................................................28-29High alloy Steel ............................................................................ 28-31

    Non-Ferrous Plate Materials ........................................................... 28-32

    MaterialSelections 28Chapter

    G3 ICARUS Corporation, 1998.

  • 28-2

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    JIS Design Code - Clad Plate Materials ........................................ 28-34

    JIS Design Code - Tube MaterialsFerrous Tube Materials

    Carbon Steel .................................................................................. 28-35Low Alloy Steel ............................................................................28-36High Alloy Steel ............................................................................ 28-37

    Non-Ferrous Tube Materials ............................................................ 28-38

    DIN Design Code - Plate MaterialsFerrous Plate Materials

    Carbon Steel .................................................................................. 28-39Heat Treated Steel ......................................................................... 28-40Low Alloy Steel ............................................................................28-41High Alloy Steel ............................................................................ 28-43

    Non-Ferrous Plate Materials ........................................................... 28-44

    DIN Design Code - Clad Plate Materials ....................................... 28-46

    DIN Design Code - Tube MaterialsFerrous Tube Materials

    Carbon Steel .................................................................................. 28-47Low Alloy Steel ............................................................................28-48High Alloy Steel ............................................................................ 28-49

    Non-Ferrous Tube Materials ............................................................ 28-50

    Lining MaterialsBrick

    Acid-Resistant Applied Over Membrane-Line Carbon Steel ....... 28-51Firebrick ........................................................................................ 28-51

    Monolithic Lining ............................................................................28-52Abrasion Resistant Linings; Replaceable ......................................... 28-52Organic, Glass, Metallic ................................................................... 28-53

    Casting Materials .............................................................................. 28-54

    Packing Materials ............................................................................. 28-55

  • Chapter 28: Material Selections 28-3

    G3 ICARUS Corporation, 1998.

    ASME Design Code - Plate Materials

    ASME Ferrous Plate Materials - Carbon Steel

    Internal ExternalPressure Pressure

    ASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    A-36 (structural steel) A 36 650 343

    A-283 Low and intermediate strength carbonsteel plates of structural quality

    (C) A 283C 650 343 na na

    A-285 Low and intermediate strength carbonsteel plates for pressure vessels

    (C) A 285 or 900 482 900 482A 285C orCS

    A-299 Carbon-manganese-silicon steel platesfor plates for pressure vessels: C - Mn - Si A 299 1000 537 900 482

    A-455 Pressure vessel plates, carbon steel,high strength manganese

    (A) A 455 650 343 650 343

    A-515 Carbon steel plates for pressure vesselsfor intermediate and higher temperatureservice:

    (70) C - Si A 515 1000 537 900 482

    A-516 Carbon steel plates for pressure vesselsor moderate and lower temperatureservice:

    (70) C - Si A 516 1000 537 900 482

    na = material not selectable for vacuum design

  • 28-4

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    ASME Ferrous Plate Materials - Heat Treated Steel

    Internal ExternalPressure Pressure

    ASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    A-353 Nine percent nickel alloy steel plates,double normalized and tempered forpressure vessels: 9Ni A 353 250 121 na na

    A-553 Eight and nine percent nickel alloy steelplate, quenched and tempered, forpressure vessels:

    (Type 1) 9Ni A 553 250 121 na na

    A-517 High strength alloy steel plates,quenched and tempered, for pressurevessels:

    (A) Cr - Mn - Si A517A 650 343 na na(B) Cr - Mn - Si A517B 650 343 na na(E) Cr - Mn - Si A517E 650 343 na na(F) Cr - Mn - Si A517F 650 343 na na

    na = material not selectable for vacuum design

  • Chapter 28: Material Selections 28-5

    G3 ICARUS Corporation, 1998.

    ASME Ferrous Plate Materials - Low Alloy Steel

    Internal ExternalPressure Pressure

    ASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    A-202 Chromium-manganese-silicon alloysteel plates for pressure vessels

    (A) A202A 1000 537 900 482(B) A 202 or 1000 537 900 482

    A202B

    A-203 Nickel alloy steel plates for pressurevessels:

    (A) 2.5Ni A203A 1000 537 900 482(B) 2.5Ni A203B 1000 537 900 482(D) 3.5Ni A203D 1000 537 900 482(E) 3.5Ni A203E 1000 537 900 482

    A-204 Molybdenum alloy steel plates forpressure vessels:

    (A) C - .5Mo A204A 1000 537 900 482(B) C - .5Mo A204B 1000 537 900 482(C) C - .5Mo A 204 or 1000 537 900 482

    A204C

    A-302 Manganese-molybdenum andmanganese-molybdenum-nickel alloysteel plates for pressure vessels:

    (A) Mn - .5Mo A302A 1000 537 900 482(B) Mn - .5Mo A 302 or 1000 537 900 482

    A302B(C) Mn - .5Mo - Ni A302C 1000 537 900 482(D) Mn - .5Mo - Ni A302D 1000 537 900 482

    A-387 Pressure vessel plates, alloy steel,chromium-molybdenum:

    (2 CL 1) .5Cr - .5Mo A387A 1000 537 900 482(2 CL 2) .5Cr - .5Mo A387G 1000 537 900 482

    (12 CL 1) 1Cr - .5Mo A387B 1200 648 900 482(12 CL 2) 1Cr - .5Mo A387H 1200 648 900 482

    (11 CL 1) 1.25Cr - .5Mo - Si A387C 1200 648 900 482(11 CL 2) 1.25Cr - .5Mo - Si A387J 1200 648 900 482

    (22 CL 1) 2.25Cr - 1Mo A387D 1200 648 900 482(22 CL 2) 2.25Cr - 1Mo A387K 1200 648 900 482

    (21 CL 1) 3Cr - 1Mo A387E 1200 648 900 482(21 CL 2) 3Cr - 1Mo A387L 1200 648 900 482

    (5 CL 1) 5Cr - .5Mo A387F 1200 648 900 482(5 CL 2) 5Cr - .5Mo A387M 1200 648 900 482

  • 28-6

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    ASME Ferrous Plate Materials - Low Alloy Steel (continued)

    Internal ExternalPressure Pressure

    ASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    A-533 Manganese-molybdenum andmanganese-molybdenum-nickelalloy steel plates, quenched andtempered, for pressure vessels:

    (A CL 1) C - Mn - Mo A533A 1000 537 na na(B CL 1) C - Mn - Mo - Ni A533B 800 426 na na(C CL 1) C - Mn - Mo - Ni A533C 800 426 na na

    na = material not selectable for vacuum design

  • Chapter 28: Material Selections 28-7

    G3 ICARUS Corporation, 1998.

    ASME Ferrous Plate Materials - High Alloy Steel

    Internal ExternalPressure Pressure

    ASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    A-240 Chromium and chromium-nickelstainless steel plate, sheet, and strip forfusion-welded unfired pressure vessels:

    (304L) 8Cr - 8Ni 304L 800 426 800 426(304) 18Cr - 8Ni SS304 1500 815 1200 648

    (316L) 16Cr - 12Ni - 2Mo 316L 850 454 800 426(316) 16Cr - 12Ni - 2Mo SS316 1500 815 1200 648(316Ti) 16Cr - 12Ni - 2Mo-Ti 316TI 1500 815 1200 648

    (317) 18Cr - 10Ni - 3Mo SS317 1500 815 1200 648(321) 18Cr - 10Ni - Ti SS321 1500 815 1200 648(347) 18Cr - 10Ni - Cb SS347 1500 815 1200 648(348) 18Cr - 10Ni - Cb SS348 1500 815 1200 648

    (2205) Duplex S2205 600 315 400 204 22Cr - 5Ni - 3Mo

    (410) 13Cr SS410 1200 648 900 482(430) 17Cr SS430 1200 648 1200 648

    na = material not selectable for vacuum design

  • 28-8

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    ASME Non-Ferrous Plate Materials

    Internal ExternalPressure Pressure

    ASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    B-209 Aluminum-alloy sheet and plate:(1100) Al A1100 400 204 na na(3003) Al A3003 400 204 na na(5052) Al A5052 400 204 na na(5083) Al A5083 150 66 na na(5086) Al A5086 150 66 na na(6061) Al A6061 400 204 na na

    B-171 Copper and copper alloys -Naval brass

    (464) CA464 400 204 350 177

    B-11 Copper plates for locomotive fireboxes:(110) Cu CU or 400 204 150 66

    CA110

    B-96 Copper-silicon alloy plate and sheet forpressure vessels:

    (655) Cu - Zn CA655 350 176 350 176

    B-152 Copper sheet, strip, plate, and rolled bar:(122) Cu CA122 400 204 150 66

    B-171 Copper-nickel alloy plate and sheet forpressure vessels:

    (715) Cu - Ni 70/30 CA715 700 371 700 371

    na = material not selectable for vacuum design

  • Chapter 28: Material Selections 28-9

    G3 ICARUS Corporation, 1998.

    ASME Non-Ferrous Plate Materials (continued)

    Internal ExternalPressure Pressure

    ASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    B-333 Hastelloy:(B) Ni - Mo HAST or 800 426 800 426

    HASTB

    B-575 Hastelloy:(C-276) Ni - Mo - Cr HASTC 1000 537 1000 537

    B-409 Specification for nickel-iron-chromiumalloy plate, sheet, and strip:

    (800) Ni - Fe - Cr I800 1500 815 1000 537

    B-424 Nickel-iron-chromium-molybdenum-copper alloy plate, sheet, and strip:

    (825) Ni - Fe - Cr - Mo - Cu I825 1000 537 700 371

    B-463 Carpenter 20 alloy plate, sheet and strip:(20Cb) Cr - Ni - Fe - Mo - Cu - Cb C 20 800 426 800 426

    B-168 Nickel-chromium-iron alloy plate, sheet,and strip,

    (600) Inconel: Ni - Cr - Fe INCNL 1200 648 1000 537

    orI600

    B-162 Nickel plate, sheet, and strip:(200) Ni NI or 600 315 600 315

    NI200 600 315 600 315(201) Ni-Low C NI201 1200 648 1000 537

    B-127 Nickel-copper alloy plate, sheet, andstrip:

    (400) Ni - Cu MONEL 900 482 800 426orM400

    B-265 Titanium and titanium alloy strip, sheet,and plate:

    (1) Ti TI35A 600 315 na na(2) Ti TI or 600 315 600 315

    TI50A 600 315 600 315

    na = material not selectable for vacuum design

  • 28-10

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    ASME Design Code - Clad Plate Materials

    SystemMaterial Classification MaterialDescription* Grade Symbol

    Vessel Base (Backing Material)**

    ASTM A-285 C A285CA-204 B A204BA-204 C A204CA-515 70 A 515A-516 70 A 516A-387 12 CL 1 A387BA-387 12 CL 2 A387HA-387 11 CL 1 A387CA-387 11 CL 2 A387JA-387 22 CL 1 A387DA-387 22 CL 2 A387K

    Cladding Material (Process Side)

    Stainless steel type 304 SS304304L 304L316 SS316

    316L 316L321 SS321347 SS347410 SS410430 SS430

    Nickel alloy 200 NI200201 NI201

    Monel 400 MONEL

    Inconel 600 INCNL

    Ni-Fe-Cr 800 I800

    Ni-Fe-Cr-Mo-Cu 825 I825

    Carpenter 20 20Cb C 20

    Titanium 2 TI

    Hastelloy B B HASTB

    Hastelloy C C-276 HASTC

    * See Plate Materials (ASME Code) for further material descriptions.

    ** Only these base materials may be used with the above list of cladding materials.No other combination may be selected.

  • Chapter 28: Material Selections 28-11

    G3 ICARUS Corporation, 1998.

    ASME Design Code - Tube Materials

    ASME Ferrous Tube Materials - Carbon Steel

    Internal ExternalPressure Pressure System

    ASTM DefaultSpec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    A-179 Seamless cold-drawn low-carbon steelheat exchanger and condenser tubes

    A 179 900 482 900 482 A285C

    A-192 Seamless carbon steel boiler tubes forhigh-pressure service

    A 192 1000 537 900 482 A 515

    A-210 Seamless medium carbon steel boilerand superheater tubes

    (A-1) A210A 1000 537 900 482 A 515(C) A210C 1000 537 900 482 A 515

    A-214 Electric-resistance-welded carbon steelheat exchanger and condenser tubes

    A 214 1000 537 900 482 A 515

    A-334 Seamless carbon steel tubes for lowtemperature service

    (1) A334A 650 343 650 343 A 442(6) A334B 650 343 650 343 A 442

  • 28-12

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    ASME Ferrous Tube Materials - Low Alloy Steel

    Internal ExternalPressure Pressure System

    ASTM DefaultSpec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    A-199 Seamless cold-drawn intermediatealloy steel heat exchanger andcondenser tubes:

    (T11) 1.25Cr - .5Mo - Si A199C 1200 648 900 482 A387C(T22) 2.5Cr - 1Mo A199D 1200 648 900 482 A387D(T21) 3Cr - .9Mo A199E 1200 648 900 482 A387E(T5) 5Cr - .5Mo A199F 1200 648 900 482 A387F

    A-209 Seamless carbon-molybdenum alloysteel boiler and superheater tubes:

    (T1) C - .5Mo A 209 1000 537 900 482 A 204(T1A) C - .5Mo A209A 1000 537 900 482 A 204(T1B) C - .5Mo A209B 1000 537 900 482 A 204

    A-213 Seamless ferritic and austenitic alloysteel boiler, superheater, andheat exchanger tubes:

    (T2) .5Cr - .5Mo A213A 1000 537 900 482 A387A(T12) 1Cr - .5Mo A213B 1200 648 900 482 A387B(T11) 1.25Cr - .5Mo - Si A213C 1200 648 900 482 A387C(T22) 2.25Cr - 1Mo A213D 1200 648 900 482 A387D(T21) 3Cr - .9Mo A213E 1200 648 900 482 A387E(T5) 5Cr - .5Mo A213F 1200 648 900 482 A387F

  • Chapter 28: Material Selections 28-13

    G3 ICARUS Corporation, 1998.

    ASME Ferrous Tube Materials - High Alloy Steel

    Internal ExternalPressure Pressure System

    ASTM DefaultSpec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    A-213 Seamless Ferritic and austenitic alloysteel boiler, superheater, and heatexchanger tubes:

    TP304 18Cr - 8Ni 304S 1500 815 1000 537 SS304TP304L 18Cr - 8Ni 304LS 800 426 800 426 304LTP316 16Cr - 12Ni - 2Mo 316S 1500 815 1000 537 SS316

    TP316L 16Cr - 12Ni - 2Mo 316LS 850 454 850 454 316LTP321 18Cr - 10Ni - Ti 321S 1500 815 1000 537 SS321TP347 18Cr - 10Ni - Cb 347S 1500 815 1000 537 SS347

    A-249 Welded austenitic steel boilersuperheater, heat exchanger, andcondenser tubes:

    TP304 18Cr - 8Ni 304W 1500 815 1000 537 SS304TP304L 18Cr - 8Ni 304LW 800 426 800 426 304LTP316 16Cr - 12Ni - 2Mo 316W 1500 815 1000 537 SS316

    TP316L 16Cr - 12Ni - 2Mo 316LW 850 454 800 426 316LTP321 18Cr - 10Ni - Ti 321W 1500 815 1000 537 SS321TP347 18Cr - 10Ni - Cb 347W 1500 815 1000 537 SS347

    A-268

    TP410 Seamless tubes 410S 1200 648 900 482 SS41013Cr

    TP410 Welded tubes 410W 1200 648 900 482 SS41013Cr

    A-789 Welded duplex austenitic steel tubes:(S31803) 22Cr - 5Ni - 3Mo 2205W 600 315 400 204 S2205

  • 28-14

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    ASME Non-Ferrous Tube Materials

    Internal ExternalPressure Pressure System

    ASTM DefaultSpec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    B-111 Seamless copper and copper alloytubes for use in surface condensers,evaporators and heat exchangers:

    (122) Cu CA122 400 204 150 66 A285C(687) Cu - Al CA687 450 232 150 66 A285C(706) Cu - Ni 90/10 CA706 600 315 150 66 A285C(715) Cu - Ni 70/30 CA715 700 371 700 371 A285C

    Admiralty Brass(443) CA443 450 232 350 176 A285C(444) CA444 450 232 350 176 A285C(445) CA445 450 232 350 176 A285C

    B-163 Seamless cold-drawn nickel tubesfor general corrosive service:

    (200) Ni NI200 600 315 600 315 NI200(201) Ni-Low C NI201 1200 648 1000 537 NI201

    B-163 Monel(400) Ni - Cu MONEL 800 426 800 426 MONEL

    B-163 Inconel(600) Ni - Cr - Fe INCNL 1200 648 1000 537 INCNL

    orI600

    B-163 Incoloy(800) Ni - Fe - Cr I800 1500 815 1000 537 I800(825) Ni - Fe - Cr - Mo - Cu I825 1000 537 700 371 I825

    B-619 Hastelloy(B) Ni - Mo HAST or 800 426 800 426 HASTB

    HASTB(C-276) Ni - Mo - Cr HASTC 1000 537 1000 537 HASTC

    B-468 Carpenter 20(20Cb) Cr - Ni - Fe -

    Mo - Cu - Cb C 20 800 426 800 426 C 20

    B-338 Titanium(2) Ti TI50A 600 315 600 315 TI50A

  • Chapter 28: Material Selections 28-15

    G3 ICARUS Corporation, 1998.

    BS Design Code - Plate Materials

    BS Ferrous Plate Materials - Carbon Steel

    Internal ExternalBS* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    A-36 (Structural steel) A 36 650 343

    A-283 Low and intermediate strength carbonsteel plates of structural quality

    154-430* A 283C 622 327 na na

    A-285 Low and intermediate strength carbonsteel plates for pressure vessels

    151-400* A 285 or 752 400 752 400161-400* A 285C or

    CS

    A-299 Carbon-manganese-silicon steel platesfor pressure vessels:

    164-400* C - Mn - Si A 299 752 400 752 400

    A-455 Pressure vessel plates, carbon steel,high strength manganese

    225-460* A 455 752 400 752 400

    A-515 Carbon steel plates for pressure vesselsfor intermediate and higher temperatureservice:

    224-460* C - Si A 515 752 400 752 400

    A-516 Carbon steel plates for pressure vesselsfor moderate and lower temperatureservice:

    224-490* C - Si A 516 752 400 752 400

    na = material not selectable for vacuum design

  • 28-16

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    BS Ferrous Plate Materials - Heat Treated Steel

    Internal ExternalBS* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    A-353 Nine percent nickel alloy steel plates,double normalized and tempered forpressure vessels:

    510N* 9Ni A 353 250 121 na na

    A-553 Eight and nine percent nickel alloy steelplate, quenched and tempered, forpressure vessels:

    510* 9Ni A 553 250 121 na na

    A-517 High strength alloy steel plates,quenched and tempered, for pressurevessels:

    (A) Cr - Mn - Si A517A 650 343 na na(B) Cr - Mn - Si A517B 650 343 na na(E) Cr - Mn - Si A517E 650 343 na na(F) Cr - Mn - Si A517F 650 343 na na

    na = material not selectable for vacuum design

  • Chapter 28: Material Selections 28-17

    G3 ICARUS Corporation, 1998.

    BS Ferrous Plate Materials - Low Alloy Steel

    Internal ExternalBS* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    A-202 Chromium-manganese-silicon alloy steelplates for pressure vessels

    (A) A202A 1000 537 900 482(B) A 202 1000 537 900 482

    orA202B

    A-203 Nickel alloy steel plates for pressurevessels:

    (A) 2.5Ni A203A 1000 537 900 482(B) 2.5Ni A203B 1000 537 900 482(E) 3.5Ni A203E 1000 537 900 482503* 3.5Ni A203D 122 50 122 50

    A-204 Molybdenum alloy steel plates forpressure vessels:

    (C) C - .5Mo A 204 1000 537 900 482 orA204C

    240* C - .5Mo A204A 752 400 752 400261* C - .5Mo A204B 752 400 752 400

    A-302 Manganese-molybdenum andmanganese-molybdenum-nickel alloysteel plates for pressure vessels:

    (A) Mn - .5Mo A302A 1000 537 900 482(B) Mn - .5Mo A 302 1000 537 900 482

    orA302B

    (C) Mn - .5Mo - Ni A302C 1000 537 900 482(D) Mn - .5Mo - Ni A302D 1000 537 900 482

  • 28-18

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    BS Ferrous Plate Materials - Low Alloy Steel (continuted)

    Internal ExternalBS* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    A-387 Pressure vessel plates, alloy steel,chromium-molybdenum:

    (2 CL 1) .5Cr - .5Mo A387A 842 450 842 450(2 CL 2) .5Cr - .5Mo A387G 842 450 842 450

    620* 1Cr - .5Mo A387B 842 450 842 450(12 CL 2) 1Cr - .5Mo A387H 896 480 896 480

    621* 1.25Cr - .5Mo - Si A387C 842 450 842 450(11 CL 2) 1.25Cr - .5Mo - Si A387J 896 480 896 480

    622-515* 2.25Cr - 1Mo A387D 842 450 842 450(22 CL 2) 2.25Cr - 1Mo A387K 896 480 896 480

    (21 CL 1) 3Cr - 1Mo A387E 896 480 896 480(21 CL 2) 3Cr - 1Mo A387L 896 480 896 480

    (5 CL 1) 5Cr - .5Mo A387F 896 480 896 480(5 CL 2) 5Cr - .5Mo A387M 896 80 896 480

    A-533 Manganese-molybdenum andmanganese-molybdenum-nickel alloysteel plates, quenched and tempered,for pressure vessels:

    (A CL 1) C - Mn - Mo A533A 1000 537 na na(B CL 1) C - Mn - Mo - Ni A533B 800 426 na na(C CL 1) C - Mn - Mo - Ni A533C 800 426 na na

    na = material not selectable for vacuum design

  • Chapter 28: Material Selections 28-19

    G3 ICARUS Corporation, 1998.

    BS Ferrous Plate Materials - High Alloy Steel

    Internal ExternalBS* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    A-240 Chromium and chromium-nickelstainless steel plate, sheet, and strip forfusion-welded unfired pressure vessels:

    (317) 18Cr - 10Ni - 3Mo SS317 1292 700 1200 648(348) 18Cr - 10Ni - Cb SS348 1292 700 1200 648

    318-S13* Duplex S2205 600 315 400 204 22Cr - 5Ni - 3Mo

    (410) 13Cr SS410 1200 648 900 482(430) 17Cr SS430 1200 648 1200 648

    304-S31* 18Cr - 8Ni SS304 1292 700 1200 648304-S11* 18Cr - 8Ni 304L 752 400 752 400316-S31* 16Cr - 12Ni - 2Mo SS316 1292 700 1200 648

    316-S11* 16Cr - 12Ni - 2Mo 316L 752 400 752 400320-517* 16Cr - 12Ni - 2Mo - Ti 316TI 1292 700 1200 648321-S31* 18Cr - 10Ni - Ti SS321 1292 700 1200 648347-S31* 18Cr - 10Ni - Cb SS347 1292 700 1200 648

  • 28-20

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    BS Non-Ferrous Plate Materials

    Internal ExternalBS* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    1470* Aluminum-alloy sheet and plate:(1100)* Al A1100 400 204 na na(3003)* Al A3003 400 204 na na(5052)* Al A5052 400 204 na na(5083)* Al A5083 150 66 na na(5086)* Al A5086 150 66 na na(6061)* Al A6061 400 204 na na

    B-171 Copper and copper alloys - Naval brass(464) CA464 400 204 200 93

    B-11 Copper plates for locomotive fireboxes:(110) Cu CU or 400 204 150 66

    CA110

    B-96 Copper-silicon alloy plate and sheet forpressure vessels:

    (655) Cu - Zn CA655 350 176 200 93

    B-152 Copper sheet, strip, plate, and rolled bar:(122) Cu CA122 400 204 150 66

    B-171 Copper-nickel alloy plate and sheet forpressure vessels:

    (715) Cu - Ni 70/30 CA715 700 371 200 93

    na = material not selectable for vacuum design

  • Chapter 28: Material Selections 28-21

    G3 ICARUS Corporation, 1998.

    BS Non-Ferrous Plate Materials (continued)

    Internal ExternalBS* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    B-333 Hastelloy:(B) Ni - Mo HAST or 800 426 800 426

    HASTB

    B-575 Hastelloy:(C-276) Ni - Mo - Cr HASTC 1000 537 800 426

    B-409 Specification for nickel-iron-chromiumalloy plate, sheet, and strip:

    (800) Ni - Fe - Cr I800 1292 700 800 426

    B-424 Nickel-iron-chromium-molybdenum-copper alloy plate, sheet, and strip:

    NA15* Ni - Fe - Cr - Mo - Cu I825 500 260 400 204

    B-463 Carpenter 20 alloy plate, sheet and strip:(20Cb) Cr - Ni - Fe - Mo - Cu - Cb C 20 800 426 800 426

    B-168 Nickel-chromium-iron alloy plate, sheet,and strip:

    (600) Ni - Cr - Fe INCNL 1200 648 800 426 orI600

    B-162 Nickel plate, sheet, and strip:(200) Ni NI or 600 315 600 315

    NI200 600 315 600 315(201) Ni-Low C NI201 1200 648 800 426

    B-127 Nickel-copper alloy plate, sheet, andstrip:

    (400) Ni - Cu MONEL 900 482 800 426 orM400

    B-265 Titanium and titanium alloy strip, sheet,and plate:

    (1) Ti TI35A 600 315 na na(2) Ti TI or 600 315 600 15

    TI50A 600 315 600 315

    na = material not selectable for vacuum design

  • 28-22

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    BS Design Code - Clad Plate Materials

    SystemMaterial Classification MaterialDescription* Grade Symbol

    Vessel Base (Backing Material)**161-400 ASTM A-285 C A285C261 A-204 B A204B

    A-204 C A204C224-460 A-515 70 A 515224-490 A-516 70 A 516620 A-387 12 CL 1 A387B620 A-387 12 CL 2 A387H621 A-387 11 CL 1 A387C621 A-387 11 CL 2 A387J622-515 A-387 22 CL 1 A387D622-515 A-387 22 CL 2 A387K

    Cladding Material (Process Side)304-S31 304 SS304304-S11 304L 304L316-S31 316 SS316316-S11 316L 316L321-S31 321 SS321347-S31 347 SS347

    410 SS410430 SS430

    Nickel alloy 200 NI200201 NI201

    Monel 400 MONEL

    Inconel 600 INCNL

    Ni-Fe-Cr 800 I800

    Ni-Fe-Cr-Mo-Cu 825 I825

    Carpenter 20 20Cb C 20

    Titanium 2 TI

    Hastelloy B B HASTB

    Hastelloy C C-276 HASTC

    * See Plate Materials (BS Code) for further material descriptions.

    ** Only these base materials may be used with the above list ofcladding materials. No other combination may be selected.

  • Chapter 28: Material Selections 28-23

    G3 ICARUS Corporation, 1998.

    BS Design Code - Tube Materials

    BS Ferrous Tube Materials - Carbon Steel

    Internal ExternalBS* Pressure Pressure Systemor DefaultASTM Spec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    A-179 Seamless cold-drawn low-carbonsteel heat exchanger andcondenser tubes

    320* A 179 752 400 752 400 A285C

    A-192 Seamless carbon steel boilertubes for high-pressure service

    410* A 192 752 400 752 400 A 515

    A-210 Seamless medium carbon steelboiler and superheater tubes

    (A-1) A210A 1000 537 900 482 A 515(C) A210C 1000 537 900 482 A 515

    A-214 Electric-resistance-weldedcarbon steel heat exchanger andcondenser tubes

    360* A 214 842 450 842 450 A 515

    A-334 Seamless carbon steel tubes forlow temperature service

    410-LT50* A334A 122 50 122 50 A 442(6) A334B 650 343 650 343 A 442

  • 28-24

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    BS Ferrous Tube Materials - Low Alloy Steel

    Internal ExternalBS* Pressure Pressure Systemor DefaultASTM Spec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    A-199 Seamless cold-drawnintermediate alloy steel heatexchanger and condenser tubes:

    (T11) 1.25Cr - .5Mo - Si A199C 1022 550 900 482 A387C(T22) 2.5Cr - 1Mo A199D 1022 550 900 482 A387D(T21) 3Cr - .9Mo A199E 1022 550 900 482 A387E(T5) 5Cr - .5Mo A199F 1022 550 900 482 A387F

    A-209 Seamless carbon-molybdenumalloy steel boiler andsuperheater tubes:

    (T1) C - .5Mo A 209 1000 537 900 482 A 204245-450* C - .5Mo A209A 752 400 752 400 A 204(T1B) C - .5Mo A209B 1000 537 900 482 A 204

    A-213 Seamless ferritic and austeniticalloy steel boiler, superheater,and heat exchanger tubes:

    (T2) .5Cr - .5Mo A213A 1000 537 900 482 A387A(T21) 3Cr - .9Mo A213E 1022 550 900 482 A387E

    620-460* 1Cr - .5Mo A213B 1022 550 900 482 A387B621-420* 1.25Cr - .5Mo - Si A213C 1022 550 900 482 A387C622-490* 2.25Cr - 1Mo A213D 1022 550 900 482 A387D625-450* 5Cr - .5Mo A213F 1022 550 900 482 A387F

  • Chapter 28: Material Selections 28-25

    G3 ICARUS Corporation, 1998.

    BS Ferrous Tube Materials - High Alloy Steel

    Internal ExternalBS* Pressure Pressure Systemor DefaultASTM Spec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    A-213 Seamless Ferritic and austeniticalloy steel boiler, superheater,and heat exchanger tubes:

    304-S18* 18Cr - 8Ni 304S 842 450 842 450 SS304304-S14* 18Cr - 8Ni 304LS 752 400 752 400 304L316-S18* 16Cr - 12Ni - 2Mo 316S 842 450 842 450 SS316

    316-S14* 16Cr - 12Ni - 2Mo 316LS 842 450 800 426 316L321-S18* 18Cr - 10Ni - Ti 321S 842 450 842 450 SS321347-S18* 18Cr - 10Ni - Cb 347S 842 450 842 450 SS347

    A-249 Welded austenitic steel boilersuperheater, heat exchanger,and condenser tubes:

    304-S25* 18Cr - 8Ni 304W 842 450 842 450 SS304304-S22* 18Cr - 8Ni 304LW 752 400 752 400 304L316-S26* 16Cr - 12Ni - 2Mo 316W 842 450 842 450 SS316

    316-S22* 16Cr - 12Ni - 2Mo 316LW 842 450 800 426 316L321-S22* 18Cr - 10Ni - Ti 321W 842 450 842 450 SS321347-S17* 18Cr - 10Ni - Cb 347W 842 450 842 450 SS347

    A-268

    TP410 Seamless tubes 410S 752 400 752 400 SS41013 Cr

    TP410 Welded tubes 410W 752 400 752 400 SS41013 Cr

    A-789 Welded duplex austenitic steeltubes:

    (S31803) 22Cr - 5Ni - 3Mo 2205W 600 315 400 204 S2205

  • 28-26

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    BS Non-Ferrous Tube Materials

    Internal ExternalBS* Pressure Pressure Systemor DefaultASTM Spec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    B-111 Seamless copper and copperalloy tubes for use in surfacecondensers, evaporators andheat exchangers:

    (122) Cu CA122 400 204 150 66 A285C(687) Cu - Al CA687 450 230 200 93 A285C(706) Cu - Ni 90/10 CA706 600 315 150 66 A285C(715) Cu - Ni 70/30 CA715 700 371 200 93 A285C

    Admiralty Brass(443) CA443 450 232 200 93 A285C(444) CA444 450 232 200 93 A285C(445) CA445 450 232 200 93 A285C

    B-163 Seamless cold-drawn nickeltubes for general corrosiveservice:

    (200) Ni NI200 600 315 600 315 NI200(201) Ni - Low C NI201 1200 648 800 426 NI201

    B-163 Monel (Seamless)(400) Ni - Cu MONEL 900 482 800 426 MONEL

    B-163 Inconel (Welded)(600) Ni - Cr - Fe INCNL 1200 648 800 426 INCNL

    orI600

    B-163 Incoloy(800) Ni - Fe - Cr (Welded) I800 1292 700 800 426 I800(825) Ni - Fe - Cr - Mo

    - Cu (Seamless) I825 1000 537 500 260 I825

    B-619 Hastelloy (Welded)(B) Ni - Mo HAST or 800 426 800 426 HASTB

    HASTB(C-276) Ni - Mo - Cr HASTC 1202 650 800 426 HASTC

    B-468 Carpenter 20 (Welded)(20Cb) Cr - Ni - Fe - Mo

    - Cu - Cb C 20 800 426 800 426 C 20

    B-338 Titanium (Welded)(2) Ti TI50A 600 315 600 315 TI50A

  • Chapter 28: Material Selections 28-27

    G3 ICARUS Corporation, 1998.

    JIS Design Code - Plate Materials

    JIS Ferrous Plate Materials - Carbon Steel

    Internal ExternalPressure Pressure

    JIS* orASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    G-3101* (structural steel) A 36 650 343 SS400*

    G-3106* Low and intermediate strengthcarbon steel plates of structuralquality

    SM520C* A 283C 662 350 na na

    G-3115* Low and intermediate strength steelplates for pressure vessels

    SPV355* A 285 or 1022 550 896 480A 285C orCS

    G-3115* Carbon-manganese-silicon steel platesfor pressure vessels: C - Mn - Si A 299 662 350 662 350

    SPV450*

    A-455 Pressure vessel plates, carbon steel,high strength manganese

    (A) A 455 650 343 650 343

    G-3118* Carbon steel plates for pressure vesselsfor intermediate and higher temperatureservice:

    SGV480* C - Si A 515 662 350 662 350

    G-3126* Carbon steel plates for pressure vesselsfor moderate and lower temperatureservice:

    SLA360* C - Si A 516 662 350 662 350

    na = material not selectable for vacuum design

  • 28-28

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    JIS Ferrous Plate Materials - Heat Treated Steel

    Internal ExternalPressure Pressure

    JIS* orASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    G-3127* Nine percent nickel alloy steelplates, double normalized andtempered for pressure vessels:

    SL9N520* 9Ni A 353 392 200 na na

    G-3127* Eight and nine percent nickelalloy steel plate, quenched andtempered, for pressure vessels:

    SL9N590* 9Ni A 553 392 200 na na

    A-517 High strength alloy steelplates, quenched and tempered,for pressure vessels:

    (A) Cr - Mn - Si A517A 650 343 na na(B) Cr - Mn - Si A517B 650 343 na na(E) Cr - Mn - Si A517E 650 343 na na(F) Cr - Mn - Si A517F 650 343 na na

    na = material not selectable for vacuum design

  • Chapter 28: Material Selections 28-29

    G3 ICARUS Corporation, 1998.

    JIS Ferrous Plate Materials - Low Alloy Steel

    Internal ExternalPressure Pressure

    JIS* orASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    A-202 Chromium-manganese-silicon alloysteel plates for pressure vessels

    (A) A202A 1000 537 900 482(B) A 202 or 1000 537 900 482

    A202B

    G-3127* Nickel alloy steel plates for pressurevessels:

    SL2N255* 2.5Ni A203A 392 200 392 200(B) 2.5Ni A203B 1000 537 900 482SL3N255* 3.5Ni A203D 392 200 122 50SL3N275* 3.5Ni A203E 392 200 392 200

    G-3103* Molybdenum alloy steel plates forpressure vessels:

    SB450M* C - .5Mo A204A 1022 550 752 400SB480M* C - .5Mo A204B 1022 550 752 400(C) C - .5Mo A 204 or 1000 537 900 482

    A204C

    G-3119* Manganese-molybdenum andmanganese-molybdenum-nickel alloysteel plates for pressure vessels:

    SBV1A* Mn - .5Mo A302A 977 525 900 482SBV1B* Mn - .5Mo A 302 or 1022 550 900 482

    A302BSBV2* Mn - .5Mo - Ni A302C 1022 550 900 482SBV3* Mn - .5Mo - Ni A302D 1022 550 900 482

    G-4109* Pressure vessel plates, alloy steel,chromium-molybdenum:

    SCMV1(A)* .5Cr - .5Mo A387A 1022 550 900 482SCMV1(N)* .5Cr - .5Mo A387G 1022 550 900 482

    SCMV2(A)* 1Cr - .5Mo A387B 1157 625 842 450SCMV2(N)* 1Cr - .5Mo A387H 1157 625 842 450

    SCMV3(A)* 1.25Cr - .5Mo - Si A387C 1157 625 896 480SCMV3(N)* 1.25Cr - .5Mo - Si A387J 1157 625 896 480

    SCMV4(A)* 2.25Cr - 1Mo A387D 1067 575 896 480SCMV4(N)* 2.25Cr - 1Mo A387K 1067 575 896 480

    SCMV5(A)* 3Cr - 1Mo A387E 1157 625 896 480SCMV5(N)* 3Cr - 1Mo A387L 1157 625 896 480

    SCMV6(A)* 5Cr - .5Mo A387F 1157 625 896 480SCMV6(N)* Cr - .5Mo A387M 1157 625 896 480

  • 28-30

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    JIS Ferrous Plate Materials - Low Alloy Steel (continued)

    Internal ExternalPressure Pressure

    JIS* orASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    G-3120* Manganese-molybdenum andmanganese-molybdenum-nickel alloysteel plates, quenched and tempered,for pressure vessels:

    SQV1A* C - Mn - Mo A533A 1022 550 na naSQV2A* C - Mn - Mo - Ni A533B 797 425 na naSQV3A* C - Mn - Mo - Ni A533C 797 425 na na

    na = material not selectable for vacuum design

  • Chapter 28: Material Selections 28-31

    G3 ICARUS Corporation, 1998.

    JIS Ferrous Plate Materials - High Alloy Steel

    Internal ExternalPressure Pressure

    JIS* orASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    G-4303* Chromium and chromium-nickelG-4304* stainless steel plate, sheet, and strip forG-4305* fusion-welded unfired pressure vessels:SUS304L* 18Cr - 8Ni 304L 797 425 752 400SUS304* 18Cr - 8Ni SS304 1472 800 1200 648

    SUS316L* 16Cr - 12Ni - 2Mo 316L 842 450 752 400SUS316* 16Cr - 12Ni - 2Mo SS316 1472 800 1200 648SUS316* 16Cr - 12Ni - 2Mo-Ti SS316TI 1472 800 1200 648

    SUS317* 18Cr - 10Ni - 3Mo SS317 1472 800 1200 648SUS321* 18Cr - 10Ni - Ti SS321 1472 800 1200 648SUS347* 18Cr - 10Ni - Cb SS347 1472 800 1200 648(348) 18Cr - 10Ni - Cb SS348 1500 815 1200 648

    (2205) Duplex S2205 600 315 400 204 22Cr - 5Ni - 3Mo

    SUS410* 13Cr SS410 1202 650 900 482SUS430* 17Cr SS430 1202 650 1200 648

  • 28-32

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    JIS Non-Ferrous Plate Materials

    Internal ExternalPressure Pressure

    JIS* orASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    H-4000* Aluminum-alloy sheet and plate:A1100P* Al A1100 392 200 na naA3003P* Al A3003 392 200 na naA5052P* Al A5052 392 200 na naA5083P* Al A5083 150 66 na naA5086P* Al A5086 150 66 na naA6061P* Al A6061 392 200 na na

    H-3100* Copper and copper alloys - Naval brassC4640P* CA464 392 200 350 177

    H3100* Copper plates for locomotive fireboxes:C1100P* Cu CU or 392 200 150 66

    CA110

    B-96 Copper-silicon alloy plate and sheet forpressure vessels:

    (655) Cu - Zn CA655 350 176 350 176

    H-3100* Copper sheet, strip, plate, and rolled bar:C1220P* Cu CA122 392 200 150 66

    H-3100* Copper-nickel alloy plate and sheet forpressure vessels:

    C7150P* Cu - Ni 70/30 CA715 662 350 662 350

    na = material not selectable for vacuum design

  • Chapter 28: Material Selections 28-33

    G3 ICARUS Corporation, 1998.

    JIS Non-Ferrous Plate Materials (continued)

    Internal ExternalPressure Pressure

    JIS* orASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    B-333 Hastelloy:(B) Ni - Mo HAST or 800 426 800 426

    HASTB

    B-575 Hastelloy:(C-276) Ni - Mo - Cr HASTC 1000 537 1000 537

    G-4902* Specification for nickel-iron- chromiumalloy plate, sheet, and strip:

    NCF800* Ni - Fe - Cr I800 1472 800 1000 537

    B-424 Nickel-iron-chromium-molybdenum-copper alloy plate, sheet, and strip:

    (825) Ni - Fe - Cr - Mo - Cu I825 1000 537 700 371

    B-463 Carpenter 20 alloy plate, sheet and strip:(20Cb) Cr - Ni - Fe - Mo - Cu - Cb C 20 800 426 800 426

    G-4902* Nickel-chromium-iron alloy plate, sheet,and strip,

    NCF600* Inconel: Ni - Cr - Fe INCNL 1202 650 1000 537 orI600

    B-162 Nickel plate, sheet, and strip:(200) Ni NI or 600 315 600 315

    NI200 600 315 600 315(201) Ni-Low C NI201 1200 648 1000 537

    H-4551* Nickel-copper alloy plate, sheet, and strip:NCuP* Ni - Cu MONEL 932 500 800 426

    orM400

    H-4600* Titanium and titanium alloy strip, sheet,and plate:

    TP28* Ti TI35A 662 350 na naTP35* Ti TI or 662 350 600 315

    TI50A 662 350 600 315

    na = material not selectable for vacuum design

  • 28-34

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    JIS Design Code - Clad Plate Materials

    SystemMaterial Classification MaterialDescription* Grade Symbol

    Vessel Base (Backing Material)**SPV350 ASTM A-285 C A285CSB480M A-204 B A204B

    A-204 C A204CSGV480 A-515 70 A 515

    SLA360 A-516 70 A 516SCMV2(A) A-387 12 CL 1 A387BSCMV2(A) A-387 12 CL 2 A387HSCMV3(A) A-387 11 CL 1 A387CSCMV3(A) A-387 11 CL 2 A387JSCMV4(A) A-387 22 CL 1 A387DSCMV4(A) A-387 22 CL 2 A387K

    Cladding Material (Process Side)Stainless steel type SUS304 304 SS304 SUS304L 304L 304L SUS316 316 SS316 SUS316L 316L 316L SUS321 321 SS321 SUS347 347 SS347 SUS410 410 SS410 SUS430 430 SS430

    Nickel alloy 200 NI200201 NI201

    Monel NCUP 400 MONEL

    Inconel NCF600 600 INCNL

    Ni-Fe-Cr 800 I800

    Ni-Fe-Cr-Mo-Cu 825 I825

    Carpenter 20 20Cb C 20

    Titanium 2 TI

    Hastelloy B B HASTB

    Hastelloy C C-276 HASTC

    * See Plate Materials (JIS Code) for further material descriptions.

    ** Only these base materials may be used with the above list of cladding materials.No other combination may be selected.

  • Chapter 28: Material Selections 28-35

    G3 ICARUS Corporation, 1998.

    JIS Design Code - Tube MaterialsJIS Ferrous Tube Materials - Carbon Steel

    Internal ExternalJIS* or Pressure Pressure SystemASTM DefaultSpec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    G-3461* Seamless cold-drawn low-carbon steelheat exchanger and condenser tubes

    STB340* A 179 1022 550 752 400 A285C

    A-192 Seamless carbon steel boiler tubes forhigh-pressure service

    A 192 1000 537 900 482 A 515

    G-3461* Seamless medium carbon steel boilerand superheater tubes

    STB510* A210A 1022 550 900 482 A 515STB410* A210C 1022 550 900 482 A 515

    G-3461* Electric-resistance-welded carbonsteel heat exchanger and condensertubes

    STB340* A 214 1022 550 900 482 A 515

    G-3464* Seamless carbon steel tubes for lowtemperature service

    (1) A334A 650 343 650 343 A 442STBL380* A334B 392 200 392 200 A 442

  • 28-36

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    JIS Ferrous Tube Materials - Low Alloy Steel

    Internal ExternalJIS* or Pressure Pressure SystemASTM DefaultSpec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    G-3462* Seamless cold-drawn intermediatealloy steel heat exchanger andcondenser tubes:

    STBA23* 1.25Cr - .5Mo - Si A199C 1202 650 900 482 A387CSTBA24* 2.5Cr - 1Mo A199D 1202 650 900 482 A387D(T21) 3Cr - .9Mo A199E 1200 648 900 482 A387ESTBA25* 5Cr - .5Mo A199F 1202 650 900 482 A387F

    G-3462* Seamless carbon-molybdenum alloysteel boiler and superheater tubes:

    STBA12* C - .5Mo A 209 1022 550 900 482 A 204STBA13* C - .5Mo A209A 1022 550 900 482 A 204(T1B) C - .5Mo A209B 1000 537 900 482 A 204

    G-3462* Seamless ferritic and austenitic alloysteel boiler, superheater, and heatexchanger tubes:

    STBA20* .5Cr - .5Mo A213A 1022 550 900 482 A387ASTBA22* 1Cr - .5Mo A213B 1202 650 900 482 A387B(T11) 1.25Cr - .5Mo - Si A213C 1200 648 900 482 A387C(T22) 2.25Cr - 1Mo A213D 1200 648 900 482 A387D(T21) 3Cr - .9Mo A213E 1200 648 900 482 A387E(T5) 5Cr - .5Mo A213F 1200 648 900 482 A387F

  • Chapter 28: Material Selections 28-37

    G3 ICARUS Corporation, 1998.

    JIS Ferrous Tube Materials - High Alloy Steel

    Internal ExternalJIS* or Pressure Pressure SystemASTM DefaultSpec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    G-3463* Seamless Ferritic and austeniticalloy steel boiler, superheater, andheat exchanger tubes:

    SUS304TB* 18Cr - 8Ni 304S 1472 800 842 450 SS304SUS304LTB* 18Cr - 8Ni 304LS 797 425 752 400 304LSUS316TB* 16Cr - 12Ni - 2Mo 316S 1472 800 842 450 SS316

    SUS316LTB* 16Cr - 12Ni - 2Mo 316LS 842 450 842 450 316LSUS321TB* 18Cr - 10Ni - Ti 321S 1472 800 842 450 SS321SUS347TB* 18Cr - 10Ni - Cb 347S 1472 800 842 450 SS347

    G-3463* Welded austenitic steel boilersuperheater, heat exchanger, andcondenser tubes:

    SUS304TB* 18Cr - 8Ni 304W 1472 800 842 450 SS304SUS304LTB* 18Cr - 8Ni 304LW 797 425 752 400 304LSUS316TB* 16Cr - 12Ni - 2Mo 316W 1472 800 842 450 SS316

    SUS316LTB* 16Cr - 12Ni - 2Mo 316LW 842 450 842 450 316LSUS321TB* 18Cr - 10Ni - Ti 321W 1472 800 842 450 SS321SUS347TB* 18Cr - 10Ni - Cb 347W 1472 800 842 450 SS347

    A-268

    TP 410 Seamless tubes 410S 752 400 752 400 SS41013Cr

    TP 410 Welded tubes 410W 752 400 752 400 SS41013Cr

    A-789 Welded duplex austenitic steel tubes:(S31803) 22Cr - 5Ni - 3Mo 2205W 600 315 400 204 S2205

  • 28-38

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    JIS Non-Ferrous Tube Materials

    Internal ExternalJIS* or Pressure Pressure SystemASTM DefaultSpec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    H-3300* Seamless copper and copper alloytubes for use in surface condensers,evaporators and heat exchangers:

    C1220T* Cu CA122 392 200 150 66 A285CC6871T* Cu - Al CA687 392 200 150 66 A285CC7060T* Cu - Ni 90/10 CA706 572 300 150 66 A285CC7150T* Cu - Ni 70/30 CA715 662 350 700 371 A285C

    Admiralty BrassC4430T* CA443 437 225 350 176 A285C(444) CA444 450 232 350 176 A285C(445) CA445 450 232 350 176 A285C

    B-163 Seamless cold-drawn nickel tubesfor general corrosive service:

    (200) Ni NI200 600 315 600 315 NI200(201) Ni-Low C NI201 1200 648 1000 537 NI201

    H-4552* MonelNCuT* Ni - Cu MONEL 887 475 752 400 MONEL

    G-4904* InconelNCF600TB* Ni - Cr - Fe INCNL 1202 650 1000 537 INCNL

    orI600

    G-4904* IncoloyNCF800TB* Ni - Fe - Cr I800 1472 800 1000 537 I800NCF825TB* Ni - Fe - Cr - Mo - Cu I825 1000 537 700 371 I825

    B-619 Hastelloy(B) Ni - Mo HAST or 800 426 800 426 HASTB

    HASTB(C-276) Ni - Mo - Cr HASTC 1000 537 1000 537 HASTC

    B-468 Carpenter 20(20Cb) Cr - Ni - Fe -

    Mo - Cu - Cb C 20 800 426 800 426 C 20

    H-4650* TitaniumTB35* Ti TI50A 662 350 600 315 TI50A

  • Chapter 28: Material Selections 28-39

    G3 ICARUS Corporation, 1998.

    DIN Design Code - Plate Materials

    DIN Ferrous Plate Materials - Carbon Steel

    Internal ExternalDIN* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    DIN EN 10025-91* (structural steel) A 36 650 343 S235JRG1*

    DIN EN 10025-91* Low and intermediate strengthcarbon steel plates of structuralquality

    S235JRG2* A 283C 662 350 na na

    DIN 17155* Low and intermediate strength steelplates for pressure vessels

    HII* A 285 or 1022 550 896 480A 285C orCS

    DIN 17102* Carbon-manganese-silicon steel platesfor pressure vessels:

    St E 355* C - Mn - Si A 299 662 350 662 350

    A-455 Pressure vessel plates, carbon steel,high strength manganese

    (A) A 455 650 343 650 343

    DIN 17155* Carbon steel plates for pressure vesselsfor intermediate and higher temperatureservice: 19Mn5* A 515 662 350 662 350

    DIN 17102* Carbon steel plates for pressure vesselsfor moderate and lower temperatureservice:

    SIE315* C - Si A 516 662 350 662 350

    na = material not selectable for vacuum design

  • 28-40

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    DIN Ferrous Plate Materials - Heat Treated Steel

    Internal ExternalDIN* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    SEW 680* Nine percent nickel alloy steelplates, double normalized andtempered for pressure vessels: X8Ni9* A 353 392 200 na na

    SEW 680* Eight and nine percent nickelalloy steel plate, quenched andtempered, for pressure vessels: X8Ni9* A 553 392 200 na na

    A-517 High strength alloy steelplates, quenched and tempered,for pressure vessels:

    (A) Cr - Mn - Si A517A 650 343 na na(B) Cr - Mn - Si A517B 650 343 na na(E) Cr - Mn - Si A517E 650 343 na na(F) Cr - Mn - Si A517F 650 343 na na

    na = material not selectable for vacuum design

  • Chapter 28: Material Selections 28-41

    G3 ICARUS Corporation, 1998.

    DIN Ferrous Plate Materials - Low Alloy Steel

    Internal ExternalDIN* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    A 202 Chromium-manganese-silicon alloysteel plates for pressure vessels

    (A) A202A 1000 537 900 482(B) A 202 or 1000 537 900 482

    A202B

    SEW 680* Nickel alloy steel plates for pressurevessels: 14Ni6* A203A 392 200 392 200 10Ni14* A203B 1000 537 900 482

    (D) 3.5Ni A203D 392 200 122 50(E) 3.5Ni A203E 392 200 392 200

    DIN 17155* Molybdenum alloy steel plates forpressure vessels: 15Mo3* A204A 1022 550 752 400

    (B) C - .5Mo A204B 1022 550 752 400(C) C - .5Mo A 204 or 1000 537 900 482

    A204C

    Manganese-molybdenum andmanganese-molybdenum-nickel alloysteel plates for pressure vessels:

    VdTUV Wbl.376 WB35* 17Mn Mo V64* A302A 977 525 900 482VdTUV Wbl.377 WB36* 15Ni Cu Mo Nb5* A 302 or 1022 550 900 482

    A302BVdTUV Wbl.378* 12Mn Ni Mo55* A302C 1022 550 900 482VdTUV Wbl384 WB34* 13Mn Ni Mo54* A302D 1022 550 900 482

    Pressure vessel plates, alloy steel,chromium-molybdenum:

    (A) .5Cr - .5Mo A387A 1022 550 900 482(G) .5Cr - .5Mo A387G 1022 550 900 482

    DIN 17155* 13Cr Mo44* A387B 1157 625 842 450DIN 17155* 13Cr Mo44* A387H 1157 625 842 450

    (C) 1.25Cr - .5Mo - Si A387C 1157 625 896 480(J) 1.25Cr - .5Mo - Si A387J 1157 625 896 480

    DIN 17155* 10Cr Mo910* A387D 1067 575 896 480VdTUV Wbl.404* 12Cr Mo910* A387K 1067 575 896 480

    VdTUV Wbl.007* 12Cr Mo195* A387E 1157 625 896 480VdTUV Wbl.007* 12Cr Mo195* A387L 1157 625 896 480

    (F) 5Cr - .5Mo A387F 1157 625 896 480(M) Cr - .5Mo A387M 1157 625 896 480

  • 28-42

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    DIN Ferrous Plate Materials - Low Alloy Steel (continued)

    Internal ExternalDIN* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    SEW 640* Manganese-molybdenum andmanganese-molybdenum-nickel alloysteel plates, quenched and tempered,for pressure vessels:

    (A) C - Mn - Mo A533A 1022 550 na na 20 Mn Mo Ni55* A533B 797 425 na na 12 Mn Ni Mo55* A533C 797 425 na na

    na = material not selectable for vacuum design

  • Chapter 28: Material Selections 28-43

    G3 ICARUS Corporation, 1998.

    DIN Ferrous Plate Materials - High Alloy Steel

    Internal ExternalDIN* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    DIN 17440* Chromium and chromium-nickelstainless steel plate, sheet, and strip forfusion-welded unfired pressure vessels: X2 Cr Ni1911* 304L 797 425 752 400 X5 Cr Ni1810* SS304 1472 800 1200 648

    X2 Cr Ni Mo17132* 316L 842 450 752 400 X5 Cr Ni Mo17122* SS316 1472 800 1200 648 X6 Cr Ni Mo Ti 17122* 316TI 1472 800 1200 648

    X2 Cr Ni Mo18164* SS317 1472 800 1200 648 X6 Cr Ni Ti1810* SS321 1472 800 1200 648 X6 Cr Ni Nb1810* SS347 1472 800 1200 648

    (348) SS348 1500 815 1200 648

    (2205) Duplex S2205 600 315 400 204 22Cr - 5Ni - 3Mo

    DIN 17440* X10 Cr13* SS410 1202 650 900 482 X6 Cr17* SS430 1202 650 1200 648

  • 28-44

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    DIN Non-Ferrous Plate Materials

    Internal ExternalDIN* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    DIN 1745* Aluminum-alloy sheet and plate:A1100P* Al A1100 392 200 na na

    Al Mn Cu* A3003 392 200 na na Al Mg 2.5* A5052 392 200 na na Al Mg 4.5* Mn* A5083 150 66 na na Al Mg 4 Mn* A5086 150 66 na na Al Mg 7.5 Si Cu* A6061 392 200 na na

    DIN 17660* Copper and copper alloys - Naval brass Cu Zn38 Sn1* CA464 392 200 350 177

    DIN 1787* Copper plates for locomotive fireboxes: E Cu58* or CU or 392 200 150 66 E Cu59* CA110

    B-96 Copper-silicon alloy plate and sheet forpressure vessels:

    (655) Cu - Zn CA655 350 176 350 176

    DIN 1787* Copper sheet, strip, plate, and rolled bar: SF-Cu CA122 392 200 150 66

    DIN 17664* Copper-nickel alloy plate and sheet forpressure vessels: Cu Ni 30 Mn1 Fe* CA715 662 350 662 350

    na = material not selectable for vacuum design

  • Chapter 28: Material Selections 28-45

    G3 ICARUS Corporation, 1998.

    DIN Non-Ferrous Plate Materials (continued)

    Internal ExternalDIN* Pressure PressureorASTM Spec System Maximum Temp.and Description and Material Degrees Degrees(Grade) Nominal Composition Symbol F C F C

    B-333 Hastelloy:(B) Ni - Mo HAST or 800 426 800 426

    HASTB

    B-575 Hastelloy:(C-276) Ni - Mo - Cr HASTC 1000 537 1000 537

    VdTUV Wbl.412*Specification for nickel-iron- chromiumalloy plate, sheet, and strip:

    NCF800* X10 Ni Cr Al Ti 3220* I800 1472 800 1000 537

    B-424 Nickel-iron-chromium-molybdenum-copper alloy plate, sheet, and strip:

    (825) Ni - Fe - Cr - Mo - Cu I825 1000 537 700 371

    B-463 Carpenter 20 alloy plate, sheet and strip:(20Cb) Cr - Ni - Fe - Mo - Cu - Cb C 20 800 426 800 426

    VdTUV Wbl.305*Nickel-chromium-iron alloy plate, sheet,and strip,Inconel: Ni Cr15 Fe INCNL 1202 650 1000 537

    orI600

    B-162 Nickel plate, sheet, and strip:(200) Ni NI or 600 315 600 315

    NI200 600 315 600 315(201) Ni-Low C NI201 1200 648 1000 537

    DIN 17750* Nickel-copper alloy plate, sheet, and strip: Ni Cu 30 Fe F45* MONEL 932 500 800 426

    orM400

    DIN 17860* Titanium and titanium alloy strip, sheet,and plate:

    3.7025.10* Ti TI35A 662 350 na na3.7035.10* Ti TI or 662 350 600 315

    TI50A 662 350 600 315

    na = material not selectable for vacuum design

  • 28-46

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    DIN Design Code - Clad Plate Materials

    SystemMaterial Classification MaterialDescription* Grade Symbol

    Vessel Base (Backing Material)**DIN 17102 St E 355 C A285CA-204 (B) ASTM A-204 B A204B

    ASTM A-204 C A204CDIN 17155 19 Mn5 70 A 515

    DIN 17102 SIE 315 70 A 516DIN 17155 13Cr Mo44 12 CL 1 A387BDIN 17155 13Cr Mo44 12 CL 2 A387HA-387 (C) ASTM A-387 11 CL 1 A387CA-387 ASTM A-387 11 CL 2 A387JDIN 17155 10Cr Mo 910 22 CL 1 A387DDIN 17155 10Cr Mo 910 22 CL 2 A387K

    Cladding Material (Process Side)Stainless steel type DIN 17440

    X5 Cr Ni189* 304 SS304X2 Cr Ni189* 304L 304LX5 Cr Ni Mo1810* 316 SS316X2 Cr Ni Mo1810* 316L 316LX10 Cr Ni Ti189* 321 SS321X10 Cr Ni Nb1810* 347 SS347X10 Cr13* 410 SS410X8 Cr17* 430 SS430

    Nickel alloy 200 NI200201 NI201

    Monel NCUP 400 MONEL

    VdTUV Wbl.305* Ni Cr15 Fe 600 INCNL

    Ni-Fe-Cr 800 I800

    Ni-Fe-Cr-Mo-Cu 825 I825

    Carpenter 20 20Cb C 20

    Titanium 2 TI

    Hastelloy B B HASTB

    Hastelloy C C-276 HASTC

    * See Plate Materials (German Code) for further material descriptions.

    ** Only these base materials may be used with the above list of cladding materials.No other combination may be selected.

  • Chapter 28: Material Selections 28-47

    G3 ICARUS Corporation, 1998.

    DIN Design Code - Tube MaterialsDIN Ferrous Tube Materials - Carbon Steel

    DIN* Internal Externalor Pressure Pressure SystemASTM DefaultSpec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    DIN 2391* Seamless cold-drawn low-carbon steelheat exchanger and condenser tubes

    St 35GBK* A 179 1022 550 752 400 A285C NBK*

    DIN 1629* Seamless carbon steel boiler tubes forhigh-pressure service

    St 37.0* A 192 1000 537 900 482 A 515

    DIN 1629* Seamless medium carbon steel boilerand superheater tubes

    St 44.0* A210A 1022 550 900 482 A 515St 52.0* A210C 1022 550 900 482 A 515

    DIN 2393* Electric-resistance-welded carbonsteel heat exchanger and condensertubes

    St 37-2 NBK* A 214 1022 550 900 482 A 515

    SEW 680* Seamless carbon steel tubes for lowtemperature service

    TTSt 35N* A334A 650 343 650 343 A 442(B) A334B 392 200 392 200 A 442

  • 28-48

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    DIN Ferrous Tube Materials - Low Alloy Steel

    DIN* Internal Externalor Pressure Pressure SystemASTM DefaultSpec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    Seamless cold-drawn intermediatealloy steel heat exchanger andcondenser tubes:

    DIN 17175* 13Cr Mo44* A199C 1202 650 900 482 A387CDIN 17175* 10Cr Mo910* A199D 1202 650 900 482 A387D(T21) 3Cr - .9Mo A199E 1200 648 900 482 A387EVdTUV007* 12Cr Mo195G A199F 1202 650 900 482 A387F

    Seamless carbon-molybdenum alloysteel boiler and superheater tubes:

    DIN 17175* 15 Mo3* A 209 1022 550 900 482 A 204(T1A) C - .5Mo A209A 1022 550 900 482 A 204(T1B) C - .5Mo A209B 1000 537 900 482 A 204

    Seamless ferritic and austenitic alloysteel boiler, superheater, and heatexchanger tubes:

    (T2) .5Cr - .5Mo A213A 1022 550 900 482 A387ADIN17175* 13Cr Mo44* A213B 1202 650 900 482 A387BDIN17175* 13Cr Mo44* A213C 1200 648 900 482 A387CDIN17175* 10Cr Mo910* A213D 1200 648 900 482 A387D(T21) 3Cr -.9Mo A213E 1200 648 900 482 A387EVdTUV007* 12Cr Mo195G* A213F 1200 648 900 482 A387F

  • Chapter 28: Material Selections 28-49

    G3 ICARUS Corporation, 1998.

    DIN Ferrous Tube Materials - High Alloy Steel

    DIN* Internal Externalor Pressure Pressure SystemASTM DefaultSpec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    DIN 17458*Seamless Ferritic and austenitic alloysteel boiler, superheater, and heatexchanger tubes: X5Cr Ni1810* 304S 1472 800 842 450 SS304 X2Cr Ni1911* 304LS 797 425 752 400 304L X5Cr Ni Mo17122* 316S 1472 800 842 450 SS316

    X2Cr Ni Mo18143* 316LS 842 450 842 450 316L X6Cr Ni Ti1810* 321S 1472 800 842 450 SS321

    X6Cr Ni Nb1810* 347S 1472 800 842 450 SS347 X10 Cr13* 410S 752 400 752 400 SS410

    DIN 17457* Welded austenitic steel boilersuperheater, heat exchanger, andcondenser tubes: X5Cr Ni1810* 304W 1472 800 842 450 SS304 X2Cr Ni1911* 304LW 797 425 752 400 304L X5Cr Ni Mo17122* 316W 1472 800 842 450 SS316

    X2Cr Ni Mo18143* 316LW 842 450 842 450 316L X6Cr Ni Ti1810* 321W 1472 800 842 450 SS321 X6 Cr Ni Nb 1810* 347W 1472 800 842 450 SS347 X10 Cr 13* 410W 752 400 752 400 SS410

    A-789 Welded duplex austenitic steel tubes:(S31803) 22Cr - 5Ni - 3Mo 2205W 600 315 400 204 S2205

  • 28-50

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    DIN Non-Ferrous Tube Materials

    DIN* Internal Externalor Pressure Pressure SystemASTM DefaultSpec System Maximum Temp. Tubesheetand Description and Material Degrees Degrees Material(Grade) Nominal Composition Symbol F C F C (Plate)

    Seamless copper and copper alloytubes for use in surface condensers,evaporators and heat exchangers:

    DIN 1787* SF Cu* CA122 392 200 150 66 A285CDIN 1785* Cu Zn20 Al2* CA687 392 200 150 66 A285CDIN 17664* Cu Ni10 Fe1 Mn* CA706 572 300 150 66 A285CDIN 17664* Cu Ni30 Mn1 Fe* CA715 662 350 700 371 A285C

    Admiralty BrassDIN 1785* Cu Zn28 Sn1* CA443 437 225 350 176 A285C(444) CA444 450 232 350 176 A285C(445) CA445 450 232 350 176 A285C

    Seamless cold-drawn nickel tubesfor general corrosive service:

    DIN 17752* LC Ni 99F34* NI200 600 315 600 315 NI200(201) Ni-Low C NI201 1200 648 1000 537 NI201

    DIN 17751* Monel Ni Cu30 Fe F45 MONEL 887 475 752 400 MONEL

    VdTUV Wbl.305* Inconel Ni Cr15 Fe* INCNL 1202 650 1000 537 INCNL

    orI600

    VdTUV Wbl.412* IncoloyX10 Ni Cr Al Ti 3220* I800 1472 800 1000 537 I800

    VdTUv Wbl.432* Ni Cr21 Mo* I825 1000 537 700 371 I825

    B-619 Hastelloy(B) Ni - Mo HAST or 800 426 800 426 HASTB

    HASTB(C-276) Ni - Mo - Cr HASTC 1000 537 1000 537 HASTC

    B-468 Carpenter 20(20Cb) Cr - Ni - Fe -

    Mo - Cu - Cb C 20 800 426 800 426 C 20

    B-338 Titanium(2) Ti TI50A 662 350 600 315 TI50A

  • Chapter 28: Material Selections 28-51

    G3 ICARUS Corporation, 1998.

    Lining Materials

    Brick: Acid-Resistant Applied Over Membrane-Lined Carbon Steel

    SystemMaterial

    Lining Material Description INCHES MM Symbol

    Red shale brick 2.5 62 25RSB4.5 112 45RSB8.0 200 80RSB

    Fireclay, 30 percent alumina 2.5 62 25AFC4.5 112 45AFC9.0 225 90AFC

    Brick: Firebrick

    SystemMaterial

    Lining Material Description INCHES MM Symbol

    Insulating firebrick 2.5 62 25IFB4.5 112 45IFB9.0 225 90IFB

    60 percent alumina firebrick 2.5 62 25FB64.5 112 45FB69.0 225 90FB6

    90 percent alumina firebrick 2.5 62 25FB94.5 112 45FB99.0 225 90FB9

  • 28-52

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    Monolithic Lining

    SystemMaterial

    Lining Material Description Symbol

    Applied to surface with anchors on 12 INCH [300 MM] centers50 percent alumina refractory gunning mix GUNA590 percent alumina refractory gunning mix GUNA990 percent alumina castable refractory CASA9

    Applied to bare surface50 percent alumina refractory gunning mix GUN5090 percent alumina refractory gunning mix GUN9090 percent alumina castable refractory CAS90

    Applied over wire mesh reinforcementGunite GUNIT

    Abrasion Resistant Linings; Replaceable

    Only for use with: equipment items water cyclones and linings plant bulk items steel fabricated plate

    SystemMaterial

    Lining Material Description Symbol

    Replaceable ceramic liner backed with urethane elastomer for light abrasion CERMLand light impact

    Replaceable ceramic liner backed with urethane elastomer for medium CERMMabrasion and light impact

    Replaceable ceramic liner backed with urethane elastomer for heavy CERMHabrasion and light impact

    Replaceable ceramic liner backed with urethane elastomer for heavy CERMVabrasion and heavy impact

    Replaceable abrasion-resistant steel plate lining (1 INCH [25 MM] thick ABRPLunless otherwise specified)

    Replaceable rubber lining (1 INCH [25 MM] thick unless otherwise REPRBspecified)

    Replaceable SS304 plate lining (1 INCH [25 MM] thick unless otherwise LS304specified)

    Replaceable SS316 plate lining (1 INCH [25 MM] thick unless otherwise LS316specified)

  • Chapter 28: Material Selections 28-53

    G3 ICARUS Corporation, 1998.

    Linings: Organic, Glass, Metallic

    SystemMaterial

    Lining Material Description Symbol

    Asphaltic Resin Lining (over Carbon Steel) ASRSN

    Epoxy Resin Lining (over Carbon Steel) EPLCS

    Phenolic Resin Lining (over Carbon Steel) PHRSN

    Kynar Sheet Lining (over Carbon Steel) PVDF

    Teflon Sheet Lining (over Carbon Steel) TFELS

    Glass Lining (over Carbon Steel) GSLCS

    1/4 INCH [6 MM] Butyl Rubber Lining (over Carbon Steel) BUTYL

    1/4 INCH [6 MM] Neoprene Sheet Lining (over Carbon Steel) NEPNE

    1/4 INCH [6 MM] Soft Natural Rubber Sheet Lining (over Carbon Steel) NATRB

    1/4 INCH [6 MM] Nitrile Rubber Lining (over Carbon Steel) NITRL

    1/4 INCH [6 MM] Hypalon Rubbler Lining (over Carbon Steel) HYPLN

    1/4 INCH [6 MM] Ebonite Lining (over Carbon Steel) EBONT

    16 PSF [80 KG/M2] Chemical Lead Lining CLEAD

    Inorganic Zinc Coating applied by brush to 3 M [0.08 MM] thickness I-ZN

    Flame sprayed Zinc Coating 8 MIL [0.20 MM] thickness ZNMZL

  • 28-54

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    Casting Materials

    SystemMaterial

    Material Classification Casting Material Description Symbol

    Aluminum Alloys Aluminum AL

    Iron and Steel Alloys Low-Alloy Steel Grade B A203BLow-Alloy Steel Grade E A203ELow-Alloy Steel Grade C A 204Low-Alloy Steel A 283

    Carbon Steel A 299Low-Alloy Steel Grade B A 302Low-Alloy Steel Grade A A387ALow-Alloy Steel Grade B A387BLow-Alloy Steel Grade C A387C

    Low-Alloy Steel Grade D A387DLow-Alloy Steel Grade E A387ECarbon Steel Grade 60 A 442Carbon Steel A 455Carbon Steel Grade 70 A 515

    Carbon Steel Grade 70 A 516Low-Alloy Steel Grade 1A A533ALow-Alloy Steel Grade 1B A533BLow-Alloy Steel Grade 1C A533C9 Percent Nickel Steel A 553Carbon Steel CSCast Iron CI

    Stainless Steel Alloys Type 304 Stainless Steel SS304or SS

    Type 304L Stainless Steel 304LType 316 Stainless Steel SS316

    Type 316L Stainless Steel 316LType 321 Stainless Steel SS321Type 347 Stainless Steel SS347Type 410 Stainless Steel SS410Type 430 Stainless Steel SS430

    Other Alloys Nickel NIInconel INCNLMonel MONELTitanium TICarpenter 20 C 20

    Other Materials Available Only SS304 Impeller, CS Casing 304SFOn Pumps Where Designated SS316 Impeller, CS Casing 316SF

    Goulds Alloy 20 GAL20High Nickel Alloy ISO BHigh Nickel Alloy ISO CCast Steel CASTS

  • Chapter 28: Material Selections 28-55

    G3 ICARUS Corporation, 1998.

    Packing Materials

    Size PackingType

    Packing Type INCHES MM Packing Material Symbol

    Activated carbon Carbon ACT-C

    Alumina Alumina ALMNA

    Berl saddles 0.5 15 Ceramic 0.5CBS0.75 20 .75CBS1.0 25 1.0CBS1.5 40 1.5CBS

    Berl saddles 0.5 15 Porcelain 0.5PBS0.75 20 .75PBS1.0 25 1.0PBS1.5 40 1.5PBS

    Calcium chloride Calcium chloride CACL

    Coke Coke COKE

    Crushed limestone Limestone LIME

    Crushed stone Stone STONE

    Dirt (earth) Earth DIRT

    Gravel Gravel GRAVEL

    INTALOX saddles 0.5 15 Ceramic 0.5CIS1.0 25 1.0CIS1.5 40 1.5CIS2.0 50 2.0CIS

    INTALOX saddles 0.5 15 Porcelain 0.5PIS1.0 25 1.0PIS1.5 40 1.5PIS2.0 50 2.0PIS

    Pall rings 0.5 15 Polypropylene 0.5PPR1.0 25 1.0PPR1.5 40 1.5PPR2.0 50 2.0PPR

    Pall rings 0.5 15 Stainless steel 0.5SPR1.0 25 1.0SPR1.5 40 1.5SPR2.0 50 2.0SPR

  • 28-56

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    Packing Materials (continued)

    Size PackingType

    Packing Type INCHES MM Packing Material Symbol

    Raschig rings 0.5 15 Ceramic 0.5CRR0.75 20 .75CRR1.0 25 1.0CRR1.5 40 1.5CRR2.0 50 2.0CRR3.0 75 3.0CRR

    Raschig rings 1.0 25 Porcelain 1.0PRR1.5 40 1.5PRR2.0 50 2.0PRR3.0 75 3.0PRR

    Raschig rings 1.0 25 Stainless steel 1.0SRR1.5 40 1.5SRR2.0 50 2.0SRR3.0 75 3.0SRR

    Raschig rings 1.0 25 Carbon steel 1.0FRR1.5 40 1.5FRR2.0 50 2.0FRR3.0 75 3.0FRR

    Resin Resin RESIN

    Sand Sand SAND

    Silica gel Silica gel S-GEL

    Tellerettes H.D. 1.0 25 Polyethylene HD-P-T

    Tellerettes L.D. 1.0 25 Polyethylene LD-P-T

    13X Molecular Sieve 13XMS

    PVC Structured Packing 68 SF/CF [223 M2/M3] 68PVC

    CPVC Structured Packing 68 SF/CF [223 M2/M3] 68CPVC

    Cascade rings 1.0 25 Ceramic 1.0CCR2.0 50 2.0CCR3.0 75 3.0CCR

    Cascade rings 1.0 25 Polypropylene 1.0PCR2.0 50 2.0PCR3.0 75 3.0PCR

    - continued -

  • Chapter 28: Material Selections 28-57

    G3 ICARUS Corporation, 1998.

    Packing Materials (continued)

    Size PackingType

    Packing Type INCHES MM Packing Material Symbol

    Cascade rings 1.0 25 Stainless steel 1.0SCR1.5 40 1.5SCR2.0 50 2.0SCR3.0 75 3.0SCR4.0 100 4.0SCR

  • 28-58

    ICARUS Corporation, 1998. G3

    ICARUS Reference

    Main DirectoryICARUS ReferencePrefaceTable of ContentsChapter 1: Introduction to Process EquipmentChapter 2: AgitatorsChapter 3: CompressorsChapter 4: DriversChapter 5: Heat TransferChapter 6: Packing, LiningsChapter 7: PumpsChapter 8: Towers, ColumnsChapter 9: Vacuum SystemsChapter 10: VesselsChapter 11: Crushers, Mills and Stock TreatmentChapter 12: Drying SystemsChapter 13: Solids ConveyingChapter 14: Separation EquipmentChapter 15: Utility Service SystemsChapter 16: Flares and StacksChapter 17: Introduction to Plant BulksChapter 18: PipingChapter 19: CivilChapter 20: SteelChapter 21: InstrumentationChapter 22: ElectricalChapter 23: Insulation and FireproofingChapter 24: PaintChapter 25: Site DevelopmentChapter 26: BuildingsChapter 27: Quoted Equipment and LibrariesChapter 28: Material SelectionsChapter 29: Units of MeasureChapter 30: Field Manpower Titles and Wage RatesChapter 31: EngineeringChapter 32: Construction EquipmentChapter 33: Base IndicesChapter 34: Code of AccountsChapter 35: Database RelationsChapter 36: ICARUS TechnologyChapter 37: Vendors/Suppliers of Design & Cost DataGlossaryIndex