material control

of 13

No. System Spec. Type Code Tag No. Material Description Isometric Dwg Unit RemarkSize(in)

Required Q'ty

Back-upQ'Ty

Purchased Q'Ty

of 13

PIPE STOCK

No. Code Description Type Remark

1 PS-0-A-1-A10

2 PS-0-A-1-A13

3 PS-0-A-1-A25

4 PS-0-A-1-B1

5 PS-0-B-4 Pipe, Copper Type "K", Seamless, ASTM B88, Hard Drawn 6 PS-3-C-1 Pipe, BE, Carbon steel A106 Gr.B, Sch STD, Seamless, As per ASME B 36.10

7 PS-3-C-5

8 PS-4-C-0 Pipe, PE, Carbon steel A106 Gr.B, Sch XS, Seamless, As per ASME B 36.10 9 PS-4-C-1 Pipe, BE, Carbon steel A106 Gr.B, Sch XS, Seamless, As per ASME B 36.10

10 PS-4-G-2

11 PS-4S-S-1 PIPE, SS ASTM A312 TP 316L, BE, SCH 40S, SMLS, ANSI B36.19

12 PS-5-C-1-N

13 PS-8-C-1 Pipe, Carbon steel A106 Gr.B, BE, Sch 160, BLK, Seamless, As per ASME B 36.10

14 PS-9-C-0

15 PS-9-C-1 Pipe, Carbon steel A106 Gr.B, BE, Sch XXS, BLK, Seamless, As per ASME B 36.10

16 PS-9-C-1-N

17 PW-1-C-1 Pipe, Carbon steel A106 Gr.B, BE, Sch 10, ERW, BLK, As per ASME B 36.10

Steel Mech. Tubing, A519 GR.4130, API 5CT, HF, Seamless, Quenched & Tempered to the requirement of L80 & NACE MR 1075, TCVN 20 FT -LB @ -4 deg F




Pipe, Seamless, carbon steel A106 Gr.B, Male Grooved Ends, Sch STD, BLK, As per ASME B 36.10

Pipe, PE, Carbon steel A106 Gr.B, Sch XS, Seamless, Galvanized, As per ASME B 36.10

Carbon steel A106 Gr.B, BE, Sch 80, BLK, Seamless, As per ASME B 36.10, NACE MR-01-75 Certified, suitable for H2S service

PIPE, CARBON STEEL ASTM A106 GR. B, PE, SCH XXS, BLK, SEAMLESS, AS PER ASME B36.10

Pipe, Carbon steel A106 Gr.B, BE, Sch XXS, BLK, Seamless, As per ASME B 36.10, NACE MR-01-75 Certified, suitable for H2S service

of 13

VALVE STOCK


1 VAR-C-1-1 Angle Stop Check Valve, 150#, Flanged Ends, Carbon Steel body ASTM A216 Gr. WCB, OS&Y-BB

2 VBJ-C-15-2

3 VBR-C-1-1

4 VBT-B-6-2

5 VBZ-C-30-1

6 VCR-C-1-1 Check Valve, 150#, RFFE, Swing type, T-Pattern, Carbon Steel body ASTM A216 Gr. WCB, Bolted Cap

7 VCT-B-1-1

8 VCV-D-1-1 Check Valve, Male Grooved Ends, Victaulic series 716H, ASTM A536 Gr.65-45-12, Buna-N Seal

9 VCW-C-1-1

10 VCW-C-1-3

11 VCW-C-1-4

12 VCZ-C-30-1 Check Valve, SAE 4-Bolt Flange , 3000#, Code 61, Flat Face ends, Carbon Steel body ASTM A105

13 VDT-B-3-1

14 VEF-B-1-1 Self closing vavle, 150#, Flat face Flanged Ends, Spring loaded Bronze body ASTM B62

15 VFL-D-1-1

16 VFL-D-1-2

17 VFL-D-1-3

18 VFL-D-1-4

19 VFV-D-1-1

20 VFW-D-1-1

21 VFW-D-1-2

22 VFW-D-1-3

23 VFW-D-1-4

24 VGF-B-1-1

25 VGJ-A-50-1-A6

26 VGJ-A-75-1-A21

27 VGJ-C-15-1

28 VGJ-C-15-2

29 VGR-C-1-1

30 VGR-C-1-2

31 VGR-C-3-1

32 VGT-B-1-1

33 VHT-B-1-1

34 VKL-S-1-1

35 VKL-S-1-2

36 VKL-S-1-3

37 VMB-C-1-1 Dump Valve, Screw-down type, Carbon Steel, sch XS, Extension Pipe, Tank Depth Approx. 14'-0"38 VMB-C-1-2 Dump Valve, Screw-down type, Carbon Steel, sch XS, Extension Pipe, Tank Depth Approx. 9'-6"

39 VNT-B-1-1

40 VOT-I-0-1 Auto Drain Valve, 16 bar, Threaed Ends, Cast Iron body, AISI 316L Ball, AISI 316L Spring

41 VQF-B-1-1

42 VQF-B-1-2

43 VQR-C-1-1

44 VRJ-C-15-1

45 VRR-C-1-1

46 VRR-C-1-2

47 VSR-C-1-1

48 VTR-C-1-1

49 VTT-B-1-1

50 VUR-C-1-1

Ball valve, 1500#, Flanged end RTJ, Full bore, Carbon Steel body ASTM A105, SS ball, Fire Safe, Clock wise wrench Operator

Ball valve, 150#, RFFE, Full bore, Carbon Steel body ASTM A216 Gr. WCB, SS ball, PTFE seat, Clock wise wrench Operator

Ball valve, 600#, Threaded ends, Full bore, Bronze body Two-Pieces ASTM B584(B62), Ball Brass w/ Chrome Plating ASTM B283, PTFE seat, Lever handle

Ball valve, SAE 4-Bolt Flange , 3000#, Code 61, Flat Face ends, Carbon Steel body ASTM A105, SS ball, Fire Safe, Clock wise wrench Operator

Check Valve, 150#, Threaded Ends, Swing type, T-Pattern, Cast bronze body ASTM B62, Disc & Seat bronze, Screw cap bronze B62

Dual plate Check Valve, Wafer-150#, Cast Steel ASTM A216 Gr. WCB, Trim 316L, Stainless Steel disc and Spring, Buna-N Seal, As per API 594.

Dual plate Check Valve, Wafer-150#, Cast Steel ASTM A216 Gr. WCB, Trim 316L, Stainless Steel disc and Spring, EPDM Seal, As per API 594.

Dual plate Check Valve, Light Spring type, Wafer-150#, Cast Steel ASTM A216 Gr. WCB, Trim 316L, Stainless Steel disc and Spring, EPDM Seal, As per API 594

Fire Hydrant Angle Valve, 300#, Pressure Standard Type, Cast Brass Body, Female NPT Inlet & OutletNTS Male c/w Blanking Cap and Chain.ABS Approved/Acceptted type & Relevant Certificate to be supplied.

Butterfly Valve, 150#, Lug type, Ductile Iron body ASTM A536, Alumium/Bronze Disc, Stainless steel 316 Stem, Buna-N-Seat, Clock wise Lever Operated

Butterfly Valve, 150#, Lug type, Ductile Iron body ASTM A536, Alumium/Bronze Disc, Stainless steel 316 Stem, Buna-N seat, Gearbox Operator with Handwheel

Butterfly Valve, 150#, Lug type, Ductile Iron body ASTM A536, Alumium/Bronze Disc, Stainless steel 316 Stem, Buna-N seat, C/W Gearbox Operator, ABS certified for shipside

Butterfly Valve, 150#, Lug type, Ductile Iron body ASTM A536, Alumium/Bronze Disc, Stainless steel 316 Stem, Buna-N seat, Clock wise Lever Operated, ABS certified for shipside

Butterfly Valve, Male Grooved Ends, Victaulic series 700 Standard profile, ASTM A536 Gr.65-45-12, Alumium/Bronze Disc, Nitrile-Seat, Clock wise Lever Operated

Butterfly Valve-Wafer 150#, Ductile Iron body ASTM A536, Alumium/Bronze Disc, Stainless Steel 316 Stem, Buna-N-Seat, Clock wise Lever Operated

Butterfly Valve, 150#, Wafer type, Ductile Iron body ASTM A536, Alumium/Bronze Disc, Stainless Steel 316 Stem, Buna-N-Seat, Gearbox Operator with Handwheel

Butterfly Valve-Wafer 150#, Ductile Iron body ASTM A536, Alumium/Bronze Disc, Stainless Steel 316 Stem, EPDM-Seat, Clock wise Lever Operated

Butterfly Valve, 150#, Wafer type, Ductile Iron body ASTM A536, Alumium/Bronze Disc, Stainless Steel 316 Stem, EPDM-Seat, Gearbox Operator with Handwheel

Gate Valve 150#, Flat Face Flanged ends ASME B16.24, Cast Bronze body & bonnet ASTM B62, HandWheel OS&Y-RS-BB, C/W ABS certified for shipside.

2" Mud Gate Valve, 5000psi WP, c/w 2-1/16" 5000psi API 6A Flange Ends, RX-24 SS inlay, Alloy Steel ASTM A487 Gr.4D, EE, API 6A, PSL-3, NACE MR 0175

5" Mud Gate Valve, 7500psi WP, c/w 5-1/8" 10000psi API 6A Flange Ends, BX-169 SS inlay, Alloy Steel ASTM A487 Gr.4D, EE, API 6A, PSL-3, NACE MR 0175

Gate Valve 1500#, Flanged ends RTJ, Cast steel body ASTM A216 Gr. WCB, Stainless Steel Trim, OS&Y-RS-BB, C/W Gear operator, NACE MR-01-75 Certified, suitable for H2S service

Gate Valve 1500#, Flanged ends RTJ, Cast steel body ASTM A216 Gr. WCB, Stainless Steel Trim, OS&Y-RS-BB, C/W Gear operator

Gate Valve 150#, RFFE, Cast steel body ASTM A216 Gr. WCB, Stem Stainless Steel, HandWheel OS&Y-RS-BB

Gate Valve 150#, Flanged ends, Cast steel body ASTM A216 Gr. WCB, Alloy Steel ASTM A182 Gr. F6a Stem, HandWheel OS&Y-RS-BB, C/W ABS certified for shipside

Gate Valve 300#, Flanged ends, Cast steel body ASTM A216 Gr. WCB, Alloy Steel ASTM A182 Gr. F6a Stem, HandWheel OS&Y-RS-BB

Gate Valve, 150#, Threaded ends, Cast Bronze body & Bonnet ASTM B62, Bronze trim, Union Bonnet, Rising stem, Solid wedge disc ASTM B62

Cock Self Closing Valve, Screw Ends, 150# for sounding c/w test cock & cap w/chain BRZ body & trim ASTM B62 as per 04-TS-02 type-A, ref. Piping construction std

Knife gate valve, 150#, Stainless Steel body CF8M, Gate and Stem stainless Steel, EPDM seat, Lug type, Rising stem, Handwheel operator

Knife gate valve, 150#, Stainless Steel body CF8M, Gate and Stem stainless Steel, EPDM seat, Lug type, Rising stem, Handwheel operator, Reach Rod & Position Indicator, c/w ABS certificate for Shipside

Knife Gate Valve, 150#, SS body CF8M, gate and stem SS, metal seat, lug type, c/w pneumatic actuator double acting (FL) & solenoid valve, manual override, local & remote position indicator

Solenoid 3-way valve, Brass, Female NPT. Normally Open.2 Status: - De-Energized: Press. to Cylinder. - Energized: Cylinder to Exhaust. Solenoid Enclose: Nema 4X Electric, Power Supply: Solenoid Coil, Contin. Duty Temp: 56 C, Max: 230 ⁰VAC.

Quick closing globe vavle, 150#, Flat face Flange Ends, Bronze body & Trim ASTM B62 c/w with hyd. Remote control impulse unit

Quick closing globe vavle, DIN PN16, Flat face Flange Ends, Bronze body & Trim ASTM B62 c/w with hyd. Remote control impulse unit

Quick closing globe vavle, 150#, Raised face flange ends, Cast Steel body c/w with hyd. Remote control impulse unit

Presure Relief Valve, Cast Steel body ASTM A216 Gr. WCB, SS Trim, 1-1/2" 1500# RTJ INLET & 2" 300# RF OUTLET, Set @ 2000PSI

Pressure Relief Valve for Sea Water Service, 3"x4" ASME Flange 150#, Set @ 170 PSI, Relieving Capacity 450 GPM, CS Body ASTM A216 Gr. WCB. ABS Certificate

Pressure Relief Valve for Sea Water Service, 3"x4" ASME Flange 150#, Set @ 185 PSI, Relieving Capacity 800 GPM, CS Body ASTM A216 Gr. WCB

Globe Stop Check Valve, 150#, RFFE, Carbon Steel body & bonnet ASTM A216 Gr. WCB, Stainless steel 316 Stem, Rising stem type, OS&Y-BB

Globe Valve, 150#, RFFE, Carbon Steel body & bonnet ASTM A216 Gr. WCB, Stainless steel 316 Stem, Rising stem type, OS&Y-BB

Globe Valve, 150#, Threaded ends, Cast Bronze body & Bonnet ASTM B62, Stem Bronze, Union Bonnet, Rising Stem type.

Pressure Reducing Valve, for Seawater Service, Globe type, 150# RFFE as per ANSI B16.5, ASTM A216 WCB, Fusion bonded Epoxy coated, Bronze/Monel Trim, SS316 tubing & fittings, Inlet Pressure max 150 psi @ 120°F, Outlet Pressure 15 psi, Flowrate 100 GPM

of 13

VALVE STOCK

51 VUR-C-1-2

52 VUR-C-1-3

53 VVF-G-1-1

54 VVF-G-1-2

55 VWR-C-1-1

56 VXR-C-1-1 Ball Valve 3-way L-port-FE-150# ANSI CS Body-SS Ball ASTM A216 WCB c/w Lever Handle

57 VXT-B-1-1

58 VXT-B-6-1

59 VYR-S-1-1 Foot valve, 150#, RFFE, SS Body A351 CF8M, SS disc, w/screen SS

60 VZB-C-1-1

61 VZB-C-1-2 Suction valve, 150# Flow-thru Suction valve, screw type, tee type, 8'-6" tank depth

Pressure Reducing Valve, for Seawater Service, Globe type, 150# RFFE as per ANSI B16.5, ASTM A216 WCB, Fusion bonded Epoxy coated, Bronze/Monel Trim, SS316 tubing & fittings, Inlet Pressure 65 psi, Outlet Pressure 15 psi, Flowrate 400 to 2000 GPM

Pressure Reducing Valve, for Seawater Service, Globe type, 150# RFFE as per ANSI B16.5, ASTM A216 WCB, Fusion bonded Epoxy coated, Bronze/Monel Trim, SS316 tubing & fittings, Inlet Pressure 125 psi, Outlet Pressure 30 psi, Flowrate 400 GPM

Vent Check valve, Flat Face Flanged Ends, 150# ANSI B16.5, Galv.Stl body c/w PE float ball & SS Bug Screen

Vent Check valve, Flat Face Flanged Ends, 150# ANSI B16.5, Galv.Stl body c/w PE float ball & SS Flame Screen

Pressure Sustaining Valve, for Seawater Service, Globe type, 150# RFFE as per ANSI B16.5, ASTM A216 WCB, Fusion bonded Epoxy coated, Bronze/Monel Trim, SS316 tubing & fittings, Outlet Pressure set at 65 psi, Flowrate 400 to 2000 GPM

Ball valve 3-Way, 150#, Threaded Ends, L-port type, Full bore, Bronze body ASTM B62, Brass W/Chrome plating ASTM B283 Ball, Teflon seat, Lever handle.

Ball valve 3-Way, 600#, Threaded ends, T-port type 180°, Full bore, Bronze body ASTM B62, Brass W/Chrome plating ASTM B283 Ball, PTFE seat, Lever handle.

Angle Type Suction Valve, Screw Type, Operated CS sch XS Extension Pipe, Tank Depth 14'-0" Ppprox. Patco or eq

of 13

FLANGE & BLIND STOCK


1 FAL-30-C-1-4

2 FAL-30-C-1-8

3 FAO-30-C-1-4

4 FAO-30-C-1-8

5 FBBX-100-A-A24

6 FBBX-100-A-B10

7 FBBX-100-A-B108 FBF-1-C Blind Flange, Flat face, 150#, ASTM A105N, As per ASME B16.5

9 FBF-1-C-1

10 FBJ-15-C-1

11 FBO-30-C12 FBR-15-C-1 Blind Flange, RF, 1500#, BLK, FS, ASTM A105N, As per ASME B16.5 13 FBR-1-C Blind Flange, Raised face, 150#, ASTM A105N, As per ASME B16.5

14 FBR-1-C-1

15 FBR-1-C-216 FBR-1-G Blind Flange, Raised face, 150#, Galvanized, FS, ASTM A105N, As per ASME B16.5 17 FBR-1-G Blind Flange, Raised face, 150#, Galvanized, FS, ASTM A105N, As per ASME B16.5

18 FBR-3-C-1

19 FBRX-50-A-A30

20 FBRX-50-A-A30A

21 FBRX-50-A-A38

22 FBRX-50-A-A9

23 FCF-1-B-424 FPR-1-C Spectacle Blind, Raised face, 150#, ASTM A105N, As per ASME B16.48 25 FSF-1-C-3 Slip On Flange, Flat face, 150#, BLK, FS, ASTM A105N, As per ASME B16.5 26 FSF-P16-C-3 Slip On Flange, Flat face, PN16, BLK, Carbon steel, As per DIN EN 1092-1 27 FSO35B150AG Slip on flange 28 FSR-1-C-3 Slip On Flange, Raised face, 150#, ASTM A105N, As per ASME B16.5 29 FSR-P10-C-3 Slip On Flange, Raise face, PN10, BLK, Carbon steel, As per DIN EN 1092-1

30 FTBX-100-A-A24A

31 FTBX-100-A-B5A32 FTR-1-G-2 Threaded Flange, Raised face, 150#, Galvanized, FS, ASTM A105N, As per ASME B16.5

33 FTRX-50-A-A9A

34 FWBX-100-A-1-0-B35 FWJ-15-C-1-8 WeldNeck Flange, RTJ, 1500#, Sch 160, BLK, FS, ASTM A105N, As per ASME B16.5 36 FWJ-15-C-1-9 WeldNeck Flange, RTJ, 1500#, Sch XXS, BLK, FS, ASTM A105N, As per ASME B16.5 37 FWR-15-C-1-5 WeldNeck Flange, RF, 1500#, Sch 80, BLK, FS, ASTM A105N, As per ASME B16.5

38 FWR-1-C-1-3 WeldNeck Flange, Raised face, 150#, Sch STD, BLK, FS, ASTM A105N, As per ASME B16.5

39 FWR-1-C-1-4 WeldNeck Flange, Raised face, 150#, Sch XS, BLK, FS, ASTM A105N, As per ASME B16.5

40 FWR-1-C-1-8

41 FWR-1-C-1-9

42 FWR-3-C-1-4 WeldNeck Flange, Raised face, 300#, Sch XS, BLK, FS, ASTM A105N, As per ASME B16.5

43 FWRX-100-A-1-0-A

44 FWRX-100-A-1-9-A

45 FWRX-50-A-1-0-A2

46 FWRX-50-A-1-4-A3

47 FWRX-50-A-1-4-A3

SAE Flange Code 61, 3000#, Flat Face end, other end butt weld SCH XS, Carbon steel A108 C1020 Oil Dipped, c/w Bolt kit, Parker WB3Q1 or eq

SAE Flange Code 61, 3000#, Flat Face end, other end butt weld SCH 160, Carbon steel A108 C1020 Oil Dipped, c/w Bolt kit, Parker WB3Q1 or eq

SAE Flange Code 61, 3000#, O-ring Face end, other end butt weld SCH XS, Carbon steel A108 C1020 Oil Dipped, c/w Bolt kit and O-ring, Parker WB3Q1 or eq

SAE Flange Code 61, 3000#, O-ring Face end, other end butt weld SCH 160, Carbon steel A108 C1020 Oil Dipped, c/w Bolt kit and O-ring, Parker WB3Q1 or eq

5-1/8 Blind Flange, API 6A Type 6BX 10000psi, AISI 4130, BX-169 SS inlay, PSL-3, NACE MR 1075, TCVN 20 FT-LB @ -4F



BLIND FLANGE, FLAT FACE, 150#, BLK, FS, ASTM A105N, AS PER ASME B16.5 (C/W 1 HOLE 1/2" NPT IN CENTER)

BLIND FLANGE , RTJ, 1500#, BLK, FS, ASTM A105N, AS PER ASME B16.5 (C/W 1 HOLE 1/2" NPT IN CENTER)

SAE Blind Flange Code 61, 3000#, O-ring Face end, Carbon steel A108 C1020 Oil Dipped, c/w Bolt kit and O-ring, Parker 24PQ1B or eq

BLIND FLANGE , RAISED FACE, 150#, BLK, FS, ASTM A105N, AS PER ASME B16.5 (C/W 1 HOLE 1/2" NPT IN CENTER)

BLIND FLANGE , RAISED FACE, 150#, BLK, FS, ASTM A105N, AS PER ASME B16.5 (C/W 1 HOLE 3/8" NPT IN CENTER)

BLIND FLANGE, RAISED FACE, 300#, SCH XS, BLK, FS, ASTM A105N, AS PER ASME B16.5 (C/W 1 HOLE 1/2" NPT IN CENTER)

3-1/8 Blind Flange, API 6A Type 6B 5000psi, AISI 4130, RX-35 SS inlay, PSL-3, NACE MR 1075, TCVN 20 FT-LB @ -4F

3-1/8 Blind Flange, API 6A Type 6B 5000psi, AISI 4130, RX-35 SS inlay, PSL-3, NACE MR 1075, TCVN 20 FT-LB @ -4F, c/w 9/16" AutoClave tapping (F250C)

4-1/16" Blind Flange, API 6A Type 6B 5000psi, AISI 4130, RX-39 SS inlay, PSL-3, NACE MR 1075, TCVN 20 FT-LB @ -4F, c/w 9/16" AutoClave tapping (F250C) and plug.

2-1/16 Blind Flange, API 6A Type 6B 5000psi, AISI 4130, RX-24 SS inlay, PSL-3, NACE MR 1075, TCVN 20 FT-LB @ -4F

Companion Flange C, Flat Face, 150#, Cast Copper Alloy ASTM B62, Brazing End, ASME B16.24

5-1/8 Test Flange, API 6A Type 6BX 10000psi, AISI 4130, BX-169 SS inlay, PSL-3, NACE MR 1075, TCVN 20 FT-LB @ -4F

3-1/16" NB API 10K TEST BLIND FLANGE C/W 9/16" AUTOCLAVE TAPPING (F250C). BX-154 RTJ GROOVE C/W 316 St St INLAY. 85KSI MIN Y/S x 105KSI MIN T/S. NACE MR-01-75. Q & T. API MONOGRAMMED. API 6A PSL-3

2-1/16" NB API 5K TEST BLIND FLANGE C/W 9/16" AUTOCLAVE TAPPING (F250C). R-24 RTJ GROOVE C/W 316 St St INLAY. 85KSI MIN Y/S x 105KSI MIN T/S. NACE MR-01-75. Q & T. API MONOGRAMMED. API 6A PSL-3

3-1/16 Weld Neck Flange, API 6A Type 6BX 10000psi, AISI 4130, BX-154 SS inlay, 4.86"OD x 3.00"ID weld prep, PSL-3, NACE MR 1075, TCVN 20 FT-LB @ -4 deg F

WELDNECK FLANGE, RAISED FACE, 150#, SCH 160, BLK, FS, ASTM A105N, AS PER ASME B16.5

WELDNECK FLANGE, RAISED FACE, 150#, SCH XXS, BLK, FS, ASTM A105N, AS PER ASME B16.5

5-1/8 Weld Neck Flange, API 6A Type 6BX 10000psi, AISI 4130, BX-169 SS inlay, 7"OD x 5.124"ID weld prep, PSL-3, NACE MR 1075, TCVN 20 FT-LB @ -4 deg F

5-1/8 Weld Neck Flange, API 6A Type 6BX 10000psi, AISI 4130, BX-169 SS inlay, BW to suite 6" SCH XXS, PSL-3, NACE MR 1075, TCVN 20 FT-LB @ -4 deg F

2-1/16 Weld Neck Flange, API 6A Type 6B 5000psi, AISI 4130, RX-24 SS inlay, 2.38"OD x 1.504"ID weld prep, PSL-3, NACE MR 1075, TCVN 20 FT-LB @ -4 deg F

2-1/16 Weld Neck Flange, API 6A Type 6B 5000psi, AISI 4130, RX-24 SS inlay, BW to suite 3" SCH XS, PSL-3, NACE MR 1075, TCVN 20 FT-LB @ -4 deg F

2-1/16 Weld Neck Flange, API 6A Type 6B 5000psi, AISI 4130, RX-24 SS inlay, BW to suite 3" SCH XS, PSL-3, NACE MR 1075, TCVN 20 FT-LB @ -4 deg F

of 13

FITTING STOCK


190E-100-A-1-B3 Elbow 90

2 90E-30-C-0 Elbow 90 Degree, 3000#, SWE, ASTM A105N, As per ASME B16.11 Elbow 90

390E-30-C-2 Elbow 90

490E-30-G-2 Elbow 90

590E-50-A-1-A11 Elbow 90

690E-50-A-1-A17 Elbow 90

790E-50-A-1-A27 Elbow 90

890E-50-A-1-A4 Elbow 90

990E-9-C-1-N Elbow 90

1090L-0-B-7 Elbow 90

1190L-1-C-1 Elbow 90

1290L-3-C-1 Elbow 90

1390L-4-C-1 Elbow 90

1490L-4S-S-1 Elbow 90

1590L-8-C-1 Elbow 90

1690L-9-C-1 Elbow 90

1790S-0-B-7 Elbow 90

1890S-3-C-1 Elbow 90

1990S-4-C-1 Elbow 90

20V90-3-D-4 Elbow 90

90 Deg Block Type Cushion Elbow, 10000psi WP, 4.86"OD x 3.00"ID weld prep, AISI 4130 Quenched & Tempered, API 6A, NACE MR 0175

Elbow 90 Degree, 3000#, Threaded ends, BLK, FS, ASTM A105N, As per ASME B16.11

Elbow 90 Degree, 3000#, Threaded ends, Galvanized, FS, ASTM A105N, As per ASME B16.11

90 Deg Long Sweep/Full Flow Elbow, 5000psi WP, 3.5"OD x 2.25"ID weld prep, AISI 4130 Quenched & Tempered, API 6A, NACE MR 0175

90 Deg Long Sweep/Full Flow Elbow, 5000psi WP, 7"OD x 5.124"ID weld prep, AISI 4130 Quenched & Tempered, API 6A, NACE MR 0175

90 Deg Long Sweep/Full Flow Elbow, 5000psi WP, 4.5"OD x 3"ID weld prep, AISI 4130 Quenched & Tempered, API 6A, NACE MR 0175

90 Deg Long Sweep/Full Flow Elbow, 5000psi WP, 2.38"OD x 1.504"ID weld prep, AISI 4130 Quenched & Tempered, API 6A, NACE MR 0175

90 Deg Block Type Cushion Elbow, Sch XXS, BLK, Seamless, ASTM A234 Gr. WPB, As per ASME B16.9, NACE MR 0175

Elbow 90 Degree - Long Radius C x C - Wrot Copper ASTM B75, Brazing Joint Type, ASME B16.22

Elbow 90 Degree, LR, BW, Sch 10, Seamless, ASTM A234 Gr. WPB, As per ASME B16.9

Elbow 90 Degree, LR, BW, Sch STD, Seamless, ASTM A234 Gr. WPB, As per ASME B16.9

Elbow 90 Degree, LR, BW, Sch XS, Seamless, ASTM A234 Gr. WPB, As per ASME B16.9

ELBOW 90 DEGREE, LR, BW, SCH 40S, SS, SEAMLESS, ASTM A403 GR.WP316L, AS PER ANSI B16.9

Elbow 90 Degree, LR, Sch 160, BLK, Seamless, ASTM A234 Gr. WPB, As per ASME B16.9

Elbow 90 Degree, LR, Sch XXS, BLK, Seamless, ASTM A234 Gr. WPB, As per ASME B16.9

Elbow 90 Degree - Close Rough C x C - Wrot Copper ASTM B75, Brazing Joint Type, ASME B16.22

Elbow 90 Degree, SR, Sch STD, BLK, Seamless, ASTM A234 Gr. WPB, As per ASME B16.28

Elbow 90 Degree, SR, Sch XS, BLK, Seamless, ASTM A234 Gr. WPB, As per ASME B16.28

Elbow 90 Degree, Male Grooved Ends, Sch STD, Victaulic No. 10, ASTM A536 Gr.65-45-12

of 13

GASKET STOCK


1 G-O-1-1 Victaulic Standard Gasket for Flexible Coupling Style 75, Nitrile 2 G-R-2-1-A29 Ring Gasket RX-35, SS 316L FULLY ANNEALED, API 6A3 G-R-2-1-A39 Ring Gasket RX-39, SS 316L FULLY ANNEALED, API 6A4 G-R-2-1-A8 Ring Gasket RX-24, SS 316L FULLY ANNEALED, API 6A 5 G-R-2-1-A8 Ring Gasket RX-24, SS 316L FULLY ANNEALED, API 6A

6 G-R-2-27 G-R-2-3-A23 Ring Gasket BX-169, SS 316L FULLY ANNEALED, API 6A 8 G-R-2-3-B8 Ring Gasket BX-154, SS 316L FULLY ANNEALED, API 6A

9 G-S-1-1

10 G-S-1-2

11 G-S-1-3

12

G-S-1-4

13G-S-1-5

14 G-S-5-1

15 G-S-7-1

16 G-S-7-2

17

G-S-8-1

18 G-W-3-1

19 G-W-3-2

20G-W-3-3

Ring Type Joint Stainless Steel Type 316, Octagonal Ring, Type R with Max 90 Brinell Hardness, As per ASME B16.20 (B16.5, 1500#)

Gasket Compressed Synthetic Fibre with nitrile binder 1/8" THK. Type Suitable for 150#, B16.5 FLANGES, As per ASME B 16.21

Gasket Compressed Synthetic Fibre with nitrile binder 1/8 THK. Full Face Type Suitable for 150#, B16.5 Flat Face Flanges, As per ASME B 16.21

Gasket Compressed Synthetic Fibre with nitrile binder 1/8 THK. Type Suitable for PN16, DIN EN 1092-1 Raise Face Flanges

GASKET COMPRESSED SYNTHETIC FIBRE WITH NITRILE BINDER 1/8 THK. TYPE SUITABLE FOR 300#, B16.5 FLANGES, AS PER ASME B 16.21. RING GASKET TYPE , FIRE SAFE APPROVED TYPE, KLINGER C4430 OR EQ.

Gasket Compressed Synthetic Fibre with nitrile binder 1/8 THK. Type Suitable for PN10, DIN EN 1092-1 Raise Face Flanges, Klinger C4430 or Eq.

Neoprene 1/8"-Suitable for Hot Drinking Water, Continuous High Temperature Limit 140 DEG C (284 DEG F)

Gasket Inorganic fibers with a nitrile binder 1/16 THK. Type Suitable for Exhaust system, Temperature up to 500 deg C, 150# Raised Face ANSI Flanges, Fire Safe Approved Type

Gasket Inorganic fibers with a nitrile binder 1/16 THK. Type Suitable for Exhaust system, Temperature up to 500 deg C, 150# Flat Face ANSI Flanges, Fire Safe Approved Type

PTFE FILLED WITH HOLLOWGLASS MICROSPHERES 1/16"-SUITABLE FOR HOT DRINKING WATER, CONTINUOUS HIGH TEMPERATURE LIMIT 140 DEG C (284 DEG F), FULL FACE TYPE SUITABLE FOR FLAT FACE FLANGE 150#, KLINGER TOP-CHEM 2003 OR EQ.

Gasket Spiral Wound SS 316L with Graphite Filler 1/8 THK. Type Suitable for 150#, B16.5 Flanges, As per ASME B 16.20

Gasket Spiral Wound SS 316L with Graphite Filler 1/8 THK. Type Suitable for 300#, B16.5 Flanges, As per ASME B16.20

Gasket Spiral Wound SS 316L with Graphite Filler 1/8 THK. Type Suitable for 1500#, B16.5 Flanges, As per ASME B16.20

of 13

GASKET STOCK


1 B-M-1-1 MACHINE BOLT, ASTM A193 Gr. B7 , Cadium-plated 1.25 in

2 B-S-1-1

3 B-S-1-1-A28

4 B-S-1-1-A7

5 B-S-1-1-B7

6 B-S-1-1-N

STUD BOLT, ASTM A193 Gr. B7 WITH 2 HEAVY HEX NUT ASTM A194 Gr. 2H, Cadium-plated 10.50 in

Stud Bolt, ASTM A193 Gr. B7M with 2 Heavy Hex Nut ASTM A194 Gr. 2HM, NACE MR 0175, Cadium-Plated, 1-1/8" Dia x 7.75" Long

Stud Bolt, ASTM A193 Gr. B7M with 2 Heavy Hex Nut ASTM A194 Gr. 2HM, NACE MR 0175, Cadium-Plated 5.75 in

Stud Bolt, ASTM A193 Gr. B7 with 2 Heavy Hex Nut ASTM A194 Gr. 2H, NACE MR 0175, Cadium-Plated, 1" Dia x 6.75" Long

Stud Bolt, ASTM A193 Gr. B7M with 2 Heavy Hex Nut ASTM A194 Gr. 2HM, NACE MR 0175, Cadium-Plated 8.75 in

of 13

SPECIAL ITEM STOCK


1 S-CNT-001 Thermocoupler Connector, CJT Stainless Steel 316, Double Ferrule2 S-CNT-002 Male Connector, CJT Stainless Steel 316, Double Ferrule, 1/2" OD x 1/2" NPT 3 S-CNT-004 Union Connector CJT Stainless Steel 316, Double Ferrule4 S-CNT-005 Male Connector, CJT Stainless Steel 316, Double Ferrule, 3/8" OD x 3/8" NPT

5 S-CPG-001

6 S-CPG-002

7 S-CPL-001

8 S-CPL-002 COUPLING QUICK ACTING MALE NPT END (UNIVERSAL CLAW) CAST BRZ BODY9 S-CPL-003 3" Long full coupling, 3000#, SWE, BLK, FS, ASTM A105N, as per ASME B16.11 10 S-CPL-004 3" Long full coupling, 3000#, Threaded ends, BLK, FS, ASTM A105N, as per ASME B16.11 11 S-DSW-001 Deck Scupper without water seal (Type A) ref# sketch 09-DD-01 Piping Contruction Standard

12 S-DSW-002

13 S-DSW-003 Deck Scupper with water seal - ref# sketch 09-DD-03 Piping Contruction Standard

14 S-EDT-001

15 S-EDT-002

16 S-ELB-001 5D Elbow 90 Degree, 25" Rad, Sch STD, Seamless, BW, Black, ASTM A106 Gr.B, As Per API 5L

17 S-EXP-001

18 S-EXP-002

19 S-EXP-003

20 S-EXP-004

21 S-EXP-005

22 S-EXP-006

23 S-EXP-007

24 S-EXP-008

25 S-FHO-001

26 S-FHO-002

27 S-FHP-001

28 S-FHP-002

29 S-FHP-003

30 S-FHP-004

COMPOUND GAUGE, 4" DIAL FACE, NPT MALE CONNECTION, LOWER MOUNT, RANGE ∅30"HGx30PSI, LIQUID FILLED TYPE

COMPOUND GAUGE 4" DIAL FACE, NPT MALE CONNECTION, LOWER MOUNT, RANGE ∅30"HGx30PSI, DIAPHRAGM TYPE & LIQUID FILLED TYPE

3" LONG FULL COUPLING, 3000# THREADED ENDS, STAINLESS STEEL ASTM A182 GR.F316 ANSI B16.11

DECK SCUPPER WITHOUT WATER SEAL (TYPE B) TO BE FABRICATED AS PER 09-DD-02, REF. PIPING CONSTRUCTION STD

Inline Eductor, Inlet 2 1/2", Suction 4", Discharge 4", Flow Rate 400 US GPM, Motive Head 84 psi, Suction lift 10 ft, Discharge head 30 ft (Min), Body; Ni-Al Bronze Nozzle SS AISI 329, All Connection to be ANSI STD

Inline Eductor, Inlet 2 1/2", Suction 4", Discharge 4", Flow Rate 175 US GPM, Motive Head 84 psi, Suction lift 3.5 ft, Discharge head 50 ft (Min), Body; Ni-Al Bronze Nozzle SS AISI 329, All Connection to be ANSI STD

Expansion Joint, FE Single Wide Arch Filled c/w Nitrile Tube & Cover Poly Reinforced Rubber ANSI 150# Flanges With Retaining Ring Fire Resistant Type c/w ABS Approved Certificate, (Sea Water & Fresh Water Application)

Expansion Joint, FE Single Wide Arch Filled C/W Nitrile Tube & Cover Poly Reinforced Rubber ANSI 150# Flanges With Vacuum Ring, Fire Resistant Type c/w ABS Approved Certificate, (Sea Water & Fresh Water Application)

Expansion Joint, FE Single Wide Arch Filled c/w Nitrile Tube & Cover Poly Reinforced Rubber ANSI 150# Flanges With Retaining Ring, Fire Resistant Type c/w ABS Approved Certificate, (Oil & Mud Resistant Type)

Expansion Joint, FE Single Wide Arch Filled c/w Nitrile Tube & Cover Poly Reinforced Rubber ANSI 150# Flanges With Vacuum Ring, Fire Resistant Type c/w ABS Approved Certificate, (Oil & Mud Resistant Type)

Expansion Bellow with Inner Sleeve and Tie Rod, FE, 150#, SS 321, Installation Temp 32°C (ambient temp.), Working Temp 5°C to 500°C, Working Pressure 1 bar, Test Pressure 2 bar, Axial Movement +/-2" and Lateral Movement +/-1/2"

Expansion Joint, FE Single Wide Arch Filled c/w Nitrile Tube & Cover Poly Reinforced Rubber DIN PN 16 Flanges With Retaining Ring, Fire Resistant Type c/w ABS Approved Certificate, (Oil & Mud Resistant Type)

Expansion Joint, FE Single Wide Arch Filled c/w Nitrile Tube & Cover Poly Reinforced Rubber DIN PN 16 Flanges With Vacuum Ring, Fire Resistant Type c/w ABS Approved Certificate, (Oil & Mud Resistant Type)

EXPANSION JOINT, FE SINGLE WIDE ARCH FILLED C/W NITRILE TUBE & COVER POLY REINFORCED RUBBER ANSI 150# FLOATING FLANGES WITH RETAINING RING, FIRE RESISTANT TYPE C/W ABS APPROVED CERTIFICATE (SEA WATER & FRESH WATER APPLICATION)

FIRE HOSE 1 1/2" ID x 50 FT LONG, SUITABLE FOR 15 bar W.P SEA WATER OF SINGLE JACKET RUBBER LINED ONE END C/W MALE INSTANTANEOUS CPLG (TO SUIT FIRE HYDRANT VALVE) & OTHER END C/W COMBINATION BRASS NOZZLE 12mm (SPRAY & SOLID JET) & EQUIP. WITH SPANNER. HOSES TO HAVE BURST PRESSURE OF NOT LESS THAN 4 TIMES W.P. AND TO BE COMPLETE WITH FACTORY-ASSEMBLED FITTINGS.TO BE ABS APPROVED/ACCEPTED TYPE & RELEVANT CERTIFICATE TO BE SUPPLIED.(REFER TO DOC. GK001-PI-PS-003-005 REV. 0, PAGE 6 OF 6)

FIRE HOSE 1 1/2" ID x 75 FT LONG, SUITABLE FOR 15 bar W.P SEA WATER OF SINGLE JACKET RUBBER LINED ONE END C/W MALE INSTANTANEOUS CPLG (TO SUIT FIRE HYDRANT VALVE) & OTHER END C/W COMBINATION BRASS NOZZLE 12mm (SPRAY & SOLID JET) & EQUIP. WITH SPANNER. HOSES TO HAVE BURST PRESSURE OF NOT LESS THAN 4 TIMES W.P. AND TO BE COMPLETE WITH FACTORY-ASSEMBLED FITTINGS.TO BE ABS APPROVED/ACCEPTED TYPE & RELEVANT CERTIFICATE TO BE SUPPLIED.(REFER TO DOC. GK001-PI-PS-003-005 REV. 0, PAGE 6 OF 6)

CHOKE & KILL HOSE, 10000 PSI WP, HIGH TEMPERATURE SERVICE -20 TO 130 DEG C, BURST PRESSURE NOT LESS THAN 2.25 x WP, OIL RESISTANT, FIRE RESISTANT TYPE, STAINLESS STEEL PROTECTIVE COVER, API SPEC 16C, NACE MR-1075.- ONE END C/W 3-1/16" API 10K 6BX FLANGE SS INLAY, RING GASKET BX 154, BOLTS & NUTS.- OTHER END C/W 3-1/16" API 10K 6BX FLANGE SS INLAY, RING GASKET BX 154, BOLTS & NUTS, COUNTER FLANGE 3-1/16" API 10K 6BX FLANGE SS INLAY & 4.86" OD x 3.00" ID BUTT-WELD PREP.ABS INSPECTION RELEASE CERTIFICATE.

WELL TEST HOSE, 10000 PSI WP, TEMPERATURE SERVICE -20 TO 100 DEG C, BURST PRESSURE NOT LESS THAN 2.25 x WP, OIL RESISTANCE, FIRE RESISTANT TYPE, API SPEC 16C, NACE MR-1075.- ONE END: 4" HAMMER UNION FIG 1502 MALE SUB END WITH NUT, C/W COUNTER FEMALE SUB END & 4.86” OD x 3.00” ID BUTT-WELD PREP.- OTHER END: 4" HAMMER UNION FIG 1502 FEMALE SUB END, C/W COUNTER MALE SUB END WITH NUT & 4.86” OD x 3.00” ID BUTT-WELD PREP.ABS INSPECTION RELEASE CERTIFICATE.

WELL TEST HOSE, 10000 PSI WP, TEMPERATURE SERVICE -20 TO 100 DEG C, BURST PRESSURE NOT LESS THAN 2.25 x WP, OIL RESISTANCE, FIRE RESISTANT TYPE, API SPEC 16C, NACE MR-1075.- ONE END: 4" HAMMER UNION FIG 1502 MALE SUB END WITH NUT, C/W COUNTER FEMALE SUB END & 4.86” OD x 3.00” ID BUTT-WELD PREP.- OTHER END: 4" HAMMER UNION FIG 1502 FEMALE SUB END, C/W COUNTER MALE SUB END WITH NUT & 4.86” OD x 3.00” ID BUTT-WELD PREP.ABS INSPECTION RELEASE CERTIFICATE.

HP CEMENT HOSE, 10000 PSI WP, TEMPERATURE SERVICE -25 TO 100 DEG C, BURST PRESSURE NOT LESS THAN 2.25 x WP, OIL RESISTANCE, FIRE RESISTANT TYPE, API SPEC 7K.- ONE END: 4" HAMMER UNION FIG 1502 MALE SUB END WITH NUT, C/W COUNTER FEMALE SUB END & 4.86” OD x 3.00” ID BUTT-WELD PREP.- OTHER END: 4" HAMMER UNION FIG 1502 FEMALE SUB END, C/W COUNTER MALE SUB END WITH NUT & 4.86” OD x 3.00” ID BUTT-WELD PREP.ABS INSPECTION RELEASE CERTIFICATE.

of 13

SPECIAL ITEM STOCK

31 S-FHP-005

32 S-FHP-006

33 S-FLM-001 Flow Meter for Fuel Oil system, CL150, RFFE, is purchased by MECH. 34 S-FLM-002 Flow Meter for Potable Water system, CL150, RFFE, is purchased by MECH.

35 S-FLX-001

36 S-FLX-002

37 S-FLX-003

38 S-FLX-004

39 S-FLX-005

40 S-FLX-006

41 S-FLX-007

42 S-FLX-008

43 S-FLX-009

44 S-FLX-010

45 S-FLX-011

46 S-FLX-012

47 S-FLX-013

48 S-FLX-014

49 S-FLX-015

50 S-FLX-016

51 S-FLX-017

52 S-FLX-018

53 S-FLX-019

54 S-FLX-020

HP MUD HOSE, 5000 PSI WP, TEMPERATURE SERVICE -25 TO 100 DEG C, BURST PRESSURE NOT LESS THAN 2.5 x WP, OIL RESISTANCE, FIRE RESISTANT TYPE, API SPEC 7K.- ONE END: 6" HAMMER UNION FIG 1002 MALE SUB END WITH NUT, C/W COUNTER FEMALE SUB END & 7.00” OD x 5.00” ID BUTT-WELD PREP.- OTHER END: 6" HAMMER UNION FIG 1002 FEMALE SUB END, C/W COUNTER MALE SUB END WITH NUT & 7.00” OD x 5.00” ID BUTT-WELD PREP.ABS INSPECTION RELEASE CERTIFICATE.

HP MUD HOSE, 5000 PSI WP, TEMPERATURE SERVICE -25 TO 100 DEG C, BURST PRESSURE NOT LESS THAN 2.5 x WP, OIL RESISTANCE, FIRE RESISTANT TYPE, API SPEC 7K.- ONE END: 6" HAMMER UNION FIG 1002 MALE SUB END WITH NUT, C/W COUNTER FEMALE SUB END & 7.00” OD x 5.00” ID BUTT-WELD PREP.- OTHER END: 6" HAMMER UNION FIG 1002 FEMALE SUB END, C/W COUNTER MALE SUB END WITH NUT & 7.00” OD x 5.00” ID BUTT-WELD PREP.ABS INSPECTION RELEASE CERTIFICATE.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150 PSI WP. ONE END C/W WING UNION FIG 200 MALE SUB W/NUT BWE & OTHER END C/W SWIVEL & WING UNION FIG 200 MALE SUB W/NUT BWE FS.BURST PRESSURE NOT LESS THAN 4 X WP.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150 PSI WP. ONE END C/W WING UNION FIG 200 MALE SUB W/NUT BWE & OTHER END C/W SWIVEL & WING UNION FIG 200 MALE SUB W/NUT BWE FS. BURST PRESSURE NOT LESS THAN 4 X WP.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 170 PSI WP. ONE END C/W WING UNION FIG 200 MALE SUB W/NUT BWE & OTHER END C/W SWIVEL & WING UNION FIG 200 MALE SUB W/NUT BWE FS.BURST PRESSURE NOT LESS THAN 4 X WP. FIRE RESISTANT, WITH ABS TYPE APPROVAL CERTIFICATE.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 185 PSI WP. ONE END C/W WING UNION FIG 200 MALE SUB W/NUT BWE & OTHER END C/W SWIVEL & WING UNION FIG 200 MALE SUB W/NUT BWE FS.BURST PRESSURE NOT LESS THAN 4 X WP. FIRE RESISTANT, WITH ABS TYPE APPROVAL CERTIFICATE.


FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150 PSI WP, NON-TOXIC ODOURLESS TYPE.ONE END C/W WING UNION FIG 200 MALE SUB W/NUT THREADED END & OTHER END C/W SWIVEL & WING UNION FIG 200 MALE SUB W/NUT THREADED END FS, HOT DIPPED GALV. BURST PRESSURE NOT LESS THAN 4 X WP.


FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150 PSI WP, MUD RESSISTANT TYPE. ONE END C/W WING UNION FIG 200 MALE SUB W/NUT BWE & OTHER END C/W SWIVEL & WING UNION FIG 200 MALE SUB W/NUT BWE FS.BURST PRESSURE NOT LESS THAN 4 X WP.

FLEXIBLE HOSE OF WIRE REINFORCED TYPE, 150 PSI WP, OIL RESISTANT TYPE. BOTH ENDS C/W WING UNION FIG 200 MALE SUB W/NUT BWE FS. BURST PRESSURE NOT LESS THAN 4 X WP.

FLEXIBLE HOSE OF WIRE REINFORCED TYPE, 150 PSI WP, OIL RESISTANT TYPE. BOTH ENDS C/W WING UNION FIG 200 MALE SUB W/NUT BWE FS. BURST PRESSURE NOT LESS THAN 4 X WP.



FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 170 PSI WP. ONE END C/W WING UNION FIG 200 MALE SUB W/NUT BWE & OTHER END C/W SWIVEL & WING UNION FIG 200 MALE SUB W/NUT BWE FS. BURST PRESSURE NOT LESS THAN 4 X WP. FIRE RESISTANT TYPE, WITH ABS TYPE APPROVAL CERTIFICATE.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 185 PSI WP. ONE END C/W WING UNION FIG 200 MALE SUB W/NUT BWE & OTHER END C/W SWIVEL & WING UNION FIG 200 MALE SUB W/NUT BWE FS. BURST PRESSURE NOT LESS THAN 4 X WP. FIRE RESISTANT TYPE, WITH ABS TYPE APPROVAL CERTIFICATE.


FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150 PSI WP, NON-TOXIC ODOURLESS TYPE.ONE END C/W WING UNION FIG 200 MALE SUB W/NUT THREADED END & OTHER END C/W SWIVEL & WING UNION FIG 200 MALE SUB W/NUT THREADED FS, HOT DIPPED GALV. BURST PRESSURE NOT LESS THAN 4 X WP.


FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150 PSI WP. MUD RESSISTANT TYPE. ONE END C/W WING UNION FIG 200 MALE SUB W/NUT BWE & OTHER END C/W SWIVEL & WING UNION FIG 200 MALE SUB W/NUT BWE FS.BURST PRESSURE NOT LESS THAN 4 X WP.

FLEXIBLE HOSE OF WIRE REINFORCED TYPE, 2000 PSI WP. ONE END C/W WING UNION FIG 1002 MALE SUB W/NUT BWE & OTHER END C/W SWIVEL & WING UNION FIG 1002 MALE SUB W/NUT BWE FS. BURST PRESSURE NOT LESS THAN 4 X WP.


of 13

SPECIAL ITEM STOCK

55 S-FLX-021

56 S-FLX-022

57 S-FLX-031

58 S-FLX-032

59 S-FLX-033

60 S-FLX-034

61 S-FLX-035

62 S-FLX-036

63 S-FLX-037

64 S-FLX-038

65 S-FLX-039

66 S-FLX-040

67 S-FLX-041

68 S-FLX-042

69 S-FLX-043

70 S-FLX-044

71 S-FLX-045

72 S-FLX-046

73 S-FLX-047

74 S-FLX-048

75 S-FLX-049

76 S-FLX-050

FLEXIBLE HOSE, WIRE REINFORCED TYPE, 150 PSI WP.ONE END C/W WING UNION FIG 200 MALE SUB W/NUT & FEMALE SUB BWE (PREPARED FOR 5" SCH 40 PIPE) & OTHER END FREE END. BURST PRESSURE NOT LESS THAN 4 X WP. LIFTING CLAMP/CHAIN TO BE SUPPLIED AT WING UNION END ONLY.

FLEXIBLE HOSE, WIRE REINFORCED TYPE, 150 PSI WP.ONE END C/W WING UNION FIG 200 MALE SUB W/NUT (PREPARED FOR 5" SCH 40 PIPE) & OTHER END FREE END. BURST PRESSURE NOT LESS THAN 4 X WP. LIFTING CLAMP/CHAIN TO BE SUPPLIED AT WING UNION END ONLY.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP, OIL RESISTANT TYPE. ONE END C/W MARPOL FLANGE& OTHER END C/W WING UNION FIG. 200 MALE SUB W/NUT BWE. ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP, OIL RESISTANT TYPE. ONE END C/W WING UNION FIG. 200 FEMALE SUB & OTHER END C/W MARPOL FLANGEALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.

FLEXIBLE HOSE OF WIRE REINFORCED TYPE, 150# WP, OIL RESISTANT & FIRE RESISTANT TYPE. BOTH ENDS C/W WING UNION FIG. 200 MALE SUB W/NUT BWE. ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.FIRE TEST CERTIFICATE MUST BE SUPPLIED

FLEXIBLE HOSE OF WIRE REINFORCED TYPE, 150# WP, OIL RESISTANT & FIRE RESISTANT TYPE. ONE ENDS C/W WING UNION FIG. 200 FEMALE SUB BWE & OTHER END C/W WING UNION FIG. 200 MALE SUB W/NUT BWE & FEMALE BLIND WITH 16" LONG SS CHAIN.ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.FIRE TEST CERTIFICATE MUST BE SUPPLIED

FLEXIBLE HOSE OF WIRE REINFORCED TYPE, 150# WP, OIL RESISTANT & FIRE RESISTANT TYPE. ONE END C/W MARPOL FLANGE & OTHER END C/W WING UNION FIG. 200 MALE SUB W/NUT BWE. ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.FIRE TEST CERTIFICATE MUST BE SUPPLIED

FLEXIBLE HOSE OF WIRE REINFORCED TYPE, 150# WP, OIL RESISTANT & FIRE RESISTANT TYPE .ONE END C/W WING UNION FIG. 200 FEMALE SUB & OTHER END C/W MARPOL FLANGALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.FIRE TEST CERTIFICATE MUST BE SUPPLIED

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP, NON-TOXIC & ODORLESS TYPE. BOTH ENDS C/W WING UNION FIG. 200 MALE SUB W/NUT THREADED END.ALL FITTINGS TO BE FS & HOT DIPPED GALVANIZED. BURST PRESSURE NOT LESS THAN 4 x WP.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP, NON-TOXIC & ODORLESS TYPE. ONE END C/W WING UNION FIG. 200 FEMALE SUB BWE & OTHER END WING UNION FIG. 200 MALE SUB W/NUT THREADED END & FEMALE BLIND WITH 16" LONG SS CHAIN.ALL FITTINGS TO BE FS & HOT DIPPED GALVANIZED. BURST PRESSURE NOT LESS THAN 4 x WP.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP. BOTH ENDS C/W WING UNION FIG. 200 MALE SUB W/NUT BWE. ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP. ONE END C/W WING UNION FIG. 200 FEMALE SUB BWE & OTHER END C/W WING UNION FIG. 200 MALE SUB W/NUT BWE. ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.


FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP. ONE END C/W WING UNION FIG. 200 FEMALE SUB BWE & OTHER END C/W WING UNION FIG. 200 MALE SUB W/NUT BWE & FEMALE BLIND WITH 16" LONG SS CHAIN.ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.


FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP. ONE END C/W WING UNION FIG. 200 FEMALE SUB BWE & OTHER END C/W WING UNION FIG. 200 MALE SUB W/NUT BWE & FEMALE BLIND WITH 16" LONG SS CHAIN.ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP, MUD RESISTANT TYPE. BOTH ENDS C/W WING UNION FIG 200 MALE SUB W/NUT BWE. ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP, MUD RESISTANT TYPE. ONE END C/W WING UNION FIG.200 FEMALE SUB BWE & OTHER END C/W WING UNION FIG.200 MALE SUB W/NUT BWE. ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.

FLEXIBLE HOSE OF WIRE REINFORCED TYPE, 150#WP, OIL RESISTANT & FIRE RESISTANT TYPE. BOTH ENDS C/W WING UNION FIG. 200 MALE SUB W/NUT BWE. ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.FIRE TEST CERTIFICATE MUST BE SUPPLIED

FLEXIBLE HOSE OF WIRE REINFORCED TYPE, 150# WP, OIL RESISTANT & FIRE RESISTANT TYPE. ONE ENDS C/W WING UNION FIG. 200 FEMALE SUB BWE & OTHER END C/W WING UNION FIG. 200 MALE SUB W/NUT BWE. ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.FIRE TEST CERTIFICATE MUST BE SUPPLIED


FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP. ONE END C/W WING UNION FIG. 200 FEMALE SUB BWE & OTHER END C/W WING UNION FIG. 200 MALE SUB W/NUT BWE. ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.

of 13

SPECIAL ITEM STOCK

77 S-FLX-051

78 S-FLX-052

79 S-FLX-120

80 S-FLX-121

81 S-FLX-122

82 S-FLX-123

83 S-FLX-124

84 S-HAM-001

85 S-HAM-001-BMALE

86 S-HAM-003-A31-MALE

87 S-HAM-003-A32-FEMALE

88 S-HAM-003-A32-MALE

89 S-HAM-003-A33-FEMALE

90 S-HAM-003-A34-BF

91 S-HAM-003-A35-BF

92 S-HAM-003-A36-BM

93 S-HAM-003-A37-BM

94 S-HAM-003-B9

95 S-HAM-003-B9-MALE

96 S-HAM-004

97 S-HAM-004-BMALE

98 S-HAM-005 Blanking Union, Fig 207 (2000 psi C.W.P), Female Sub, BLK, FS,ASTM A105

99 S-HAM-005-BMALE

100 S-HAM-007

101 S-HAM-007-BMALE

102 S-HAM-008

103 S-HAM-008-BMALE

104 S-HAM-009

105 S-HAM-009-BMALE

106 S-HAM-009-FMALE

107 S-HAM-009-MALE

108 S-HAM-010

109 S-HAM-010-BMALE

110 S-HAM-010-FEMALE

111 S-HAM-010-MALE

112 S-HAM-011

113 S-HAM-011-BMALE


FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP. ONE END C/W MARPOL FLANGE & OTHER END C/W WING UNION FIG. 200 MALE SUB W/NUT BWE. ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.

FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, 150# WP. ONE END C/W WING UNION FIG. 200 FEMALE SUB & OTHER END C/W MARPOL FLANGE.ALL FITTINGS TO BE FS. BURST PRESSURE NOT LESS THAN 4 x WP.

AIR SERVICE FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPEMAX WORKING PRESSURE 150 PSI.END CONN. #1: 1 1/16"-12 SWIVEL FEMALE JIC 37 DEGREEC/W ADAPTOR 1 1/16"-12 MALE JIC 37 DEGREE x 1/2" MALE NPT, Q'TY 02 PCSEND CONN. #2: 1 1/16"-12 SWIVEL FEMALE JIC 37 DEGREEC/W ADAPTOR 1 1/16"-12 MALE JIC 37 DEGREE x 1" MALE NPT, Q'TY 02 PCSALL FITTINGS ARE STAINLESS STEELBURST PRESSURE NOT LESS THAN 4 X WP.




FLEXIBLE HOSE OF NON-WIRE REINFORCED TYPE, SUITABLE FOR BRINE WATERMAX WORKING PRESSURE 150 PSI.BOTH END CONN.: FLANGE, RAISED FACE, 150#, BLK, FS, ASTM A105N, AS PER ASME B16.5 BURST PRESSURE NOT LESS THAN 4 X WP.

Hammer Union, Fig.100 (1000 psi CWP), Threaded Ends, Female Sub, Ductile Iron Casting ASTM A395, ANSI B1.20.1

Hammer Union, Fig.100, (1000 psi CWP), Blind Male Sub, Ductile Iron Casting ASTM A395, ANSI B1.20.1 c/w 20" SS chain

FMC WECO Hammer Union, Fig 1502, 10000 psi WP, BWE male sub with wing nut, butt weld to suit 3" XXS, AISI 4130, NACE MR 0175. (interchangeable with FMC WECO female sub)

FMC WECO Hammer Union, Fig 1502, 10000 psi WP, BWE female sub, 3.5"OD x 2.25"ID weld prep, AISI 4130, NACE MR 0175. (interchangeable with FMC WECO male sub)

FMC WECO Hammer Union, Fig 1502, 10000 psi WP, BWE male sub with wing nut, 3.5"OD x 2.25"ID weld prep, AISI 4130, NACE MR 0175. (interchangeable with FMC WECO female sub)

FMC WECO Hammer Union, Fig 1502, 10000 psi WP, BWE female sub, butt weld to suit 3" XS pipe, AISI 4130, NACE MR 0175. (interchangeable with FMC WECO male sub)

Hammer Union, Fig 1502, 10000 psi WP, Blind Female sub, AISI 4130, NACE MR 0175, (interchangeable with Male sub), c/w 9/16" AutoClave tapping (F250C) and plug. To be supplied with seal ring.

Hammer Union, Fig 1502, 15000 psi WP, Blind Female sub, AISI 4130, Standard Service, (interchangeable with Male sub), c/w 9/16" AutoClave tapping (F250C) and plug. To be supplied with seal ring.

Hammer Union, Fig 1502, 10000 psi WP, Blind Male sub with wing nut, AISI 4130, NACE MR 0175. (interchangeable with female sub) c/w 9/16" AutoClave tapping (F250C) and plug.

Hammer Union, Fig 1502, 15000 psi WP, Blind Male sub with wing nut, AISI 4130, Standard Service (interchangeable with female sub) c/w 9/16" AutoClave tapping (F250C) and plug.

Hammer Union, Fig 1502 (10000 psi CWP), BWE Female Sub, 4.86"OD x 3.00"ID weld prep, AISI 4130, NACE MR-0175

Hammer Union, Fig 1502 (10000 psi C.W.P), male sub with wing nut, 4.86"OD x 3.00"ID weld prep, AISI 4130, NACE MR-0175

Hammer Union, Fig 206 (2000 psi CWP), BWE Female Sub, BLK, FS, ASTM A105 (BWE Prepared to Weld to 2" XS Pipe)

Hammer Union, Fig 206 (2000 psi C.W.P), blind male sub with wing nut, BLK, FS ASTM A105 c/w 20" SS chain

Blanking Union, Fig 207 (2000 psi C.W.P), Blind Male Sub, BLK, FS,ASTM A105, Blanking Union c/w 16" SS chain.

Hammer Union, Fig 602 (6000 psi C.W.P) BWE female sub, BLK, FS ASTM A105 (bwe end prepared to weld to sch 160 pipe)

Hammer Union, Fig 602 (6000 psi C.W.P) blind male sub with wing nut, BLK, FS ASTM A105 c/w 20" SS chain

Hammer Union, Fig 602 (6000 psi CWP), BWE Female Sub, BLK, FS, ASTM A105 (BWE Prepared to Weld to XS Pipe)


Hammer Union, Fig 1002 (10000 psi C.W.P), BWE female sub, BLK, FS, ASTM A105 (BWE prepared to weld to 6" XXS pipe)

Hammer Union, Fig 1002 (10000 psi C.W.P), blind male sub with wing nut, BLK, FS, ASTM A105 c/w 20" SS chain.

HAMMER UNION, FIG 1002 (10000 PSI C.W.P FOR STANDARD SERVICES), BWE FEMALE SUB, ALLOY STEEL AISI 4130 (BWE PREPARED TO WELD TO SCH XXS PIPE)

HAMMER UNION, FIG 1002 (10000 PSI C.W.P FOR STANDARD SERVICES), BWE MALE SUB WITH WING NUT, ALLOY STEEL AISI 4130 (BWE PREPARED TO WELD TO SCH XXS PIPE)

Hammer Union, Fig 1002 (10000 psi C.W.P), BWE female sub, BLK, FS, ASTM A105 (BWE prepared to weld to 6" XS pipe)

Hammer Union, Fig 1002 (10000 psi C.W.P), blind male sub with wing nut, BLK, FS, ASTM A105 c/w 20" SS chain.

HAMMER UNION, FIG 1002 (10000 PSI C.W.P FOR STANDARD SERVICES), BWE FEMALE SUB, ALLOY STEEL AISI 4130 (BWE PREPARED TO WELD TO SCH XS PIPE)

Hammer Union, Fig 1002 (10000 psi C.W.P), male sub with wing nut, BLK, FS, ASTM A105 (BWE prepared to weld to 6" XS pipe)

Hammer Union, Fig 200 (2000 psi CWP), BWE Female Sub, BLK, FS, ASTM A105 (BWE Prepared to Weld to XS Pipe)


HAMMER UNION, FIG 200 (2000 PSI C.W.P), FEMALE SUB BWE, FS, ASTM A105 (BWE PREPARED TO WELD TO SCH XS PIPE)

of 13

SPECIAL ITEM STOCK

115 S-HAM-011-MALE

116 S-HAM-012

117 S-HAM-013

118 S-HAM-013-BMALE



121 S-HAM-013-MALE Hammer Union, Fig 200 (2000 psi C.W.P), Thread Male sub with wing nut, BLK, FS ASTM A105

122 S-HAM-014

123 S-HAM-015

124 S-HAM-016

125 S-HAM-017-MALE

126 S-HAM-019

127 S-HAM-019-MALE

128 S-HNP-001

129 S-HNP-001

130 S-LVG-001

131 S-LVG-002

132 S-LVG-003

133 S-LVG-004

134 S-MSS-001 Mud Suction Strainer, RFFE, 150#, C/W SS 316 Strainer 3/16" Perforation 135 S-MSS-001 Mud Suction Strainer, RFFE, 150#, C/W SS 316 Strainer 3/16" Perforation

136 S-PAR-ETX

137 S-PAR-FTX

138 S-PAR-HTX Union, JIC (Male) 37 deg Flare / 37 deg Flare, SS316, c/w Nut, Sleeve, Parker Triple-lok HTX or eq.

139 S-PAR-WTX

140 S-PLT-001 Cap Plate 6" Diameter, 3/8" Thickness, connect to 1" breather line c/w coupling 141 S-PLT-002 Cap Plate 6" Diameter, 3/8" Thickness, connect to 4" breather line

142 S-PSG-001

143 S-PSG-001

144 S-PSG-002

145 S-RBS-001

146 S-RUI-001 Reducing Union, CJT Stainless Steel 316, Double Ferrule

147 S-SDC-001

148 S-SPC-001

149 S-SPS-002

150 S-SPS-003

151 S-SPS-004 Simplex Basket Strainer, RFFE, purchased by MECH.

152 S-TMG-001

153 S-TUB-001 Tubing, Stainless steel A269 TP316, Soft Annealed, 0.035" Thickness 154 S-TUB-002 Tubing, Stainless steel A269 TP316, Soft Annealed, 0.049" Thickness, JIC 37 deg Flare ends 155 S-UEL-001 Union 90 deg Elbow, CJT Stainless Steel 316, Double Ferrule 156 S-UET-001 Union Equal Tee, CJT Stainless Steel 316, Double Ferrule

157 S-YST-001

158 S-YST-002

Hammer Union, Fig 200 (2000 psi C.W.P), male sub with wing nut, BLK, FS ASTM A105 (bwe end prepared to weld to XS pipe)

HAMMER UNION, FIG 200 (2000 PSI C.W.P), FEMALE SUB BWE AND BLIND MALE SUB WITH NUT, FS, ASTM A105, BLIND MALE SUB C/W 16" SS CHAIN (BWE PREPARED TO WELD TO SCH STD PIPE)

HAMMER UNION, FIG 200 (2000 PSI C.W.P), FEMALE SUB THREADED END AND BLIND MALE SUB WITH NUT, FS, ASTM A105, HOT DIPPED GALVANIZED, BLIND MALE SUB C/W 16" SS CHAIN.


HAMMER UNION, FIG 200 (2000 PSI C.W.P), FEMALE SUB THREADED END, FS, ASTM A105, HOT DIPPED GALVANIZED.

HAMMER UNION, FIG 200 (2000 PSI C.W.P), FEMALE SUB THREADED END, FS, ASTM A105, HOT DIPPED GALVANIZED.

HAMMER UNION, FIG 200 (2000 PSI C.W.P), BWE MALE & FEMALE SUB COMPLETE SET, FS, ASTM A105 (BWE PREPARED TO WELD TO SCH XS PIPE)

HAMMER UNION, FIG 1002 (10000 PSI C.W.P FOR STANDARD SERVICES), BWE MALE SUB WITH WING NUT AND BLIND FEMALE SUB, ALLOY STEEL AISI 4130 (BWE PREPARED TO WELD TO SCH 160 PIPE) BLIND FEMALE SUB C/W 20" SS CHAIN.

Hammer Union, Fig 200 (2000 psi CWP), BWE Female Sub, BLK, FS, ASTM A105 (BWE Prepared to Weld to STD Pipe)

Hammer Union, Fig 1002 (75000 psi C.W.P), male sub with wing nut, 3.5"OD x 2.25"ID weld prep, AISI 4130, NACE MR-0175

Hammer Union, Fig 1004 (75000 psi CWP), BWE Female Sub, 7"OD x 5.124"ID weld prep, AISI 4130, NACE MR-0175

Hammer Union, Fig 1004 (75000 psi C.W.P), male sub with wing nut, 7"OD x 5.124"ID weld prep, AISI 4130, NACE MR-0175

Hose Nipple, Male Grooved End x Male Hose End, Victaulic No. 48, Carbon Steel A106 Gr.B, Sch STD, BLK, Seamless, As per ASME B 36.10

Hose Nipple, Male Grooved End x Male Hose End, Victaulic No. 48, Carbon Steel A106 Gr.B, Sch STD, BLK, Seamless, As per ASME B 36.10

MAGNETIC LEVEL INDICATOR, FLAG TYPE, TOP END FLAT WITH 1/2" NPT PLUG, SIDE CONNECTION 3/4" ANSI 150# RAISED FACE FLANGED END, BOTTOM END DUAL FLANGE WITH 1/2" NPT PLUG, CENTER TO CENTER: 6'-10 3/8" (2092mm), FLOAT MATERIAL 316L SS, MAX OPERATING TEMP: 284 DEG F (140 DEG C), MAX OPERATING PRESSURE: 1 TO 25 kg/cm2, SPECIFIC GRAVITY (S.G.) : 0.75 MIN, LOWER CENTER FLANGE TO BOTTOM FLANGE APPROX. 6" (160mm).TO BE ABS APPROVED TYPE & C/W ABS CERTIFICATEREFER TO SKETCH 02

MAGNETIC LEVEL INDICATOR, FLAG TYPE, TOP END FLAT WITH 1/2" NPT PLUG, SIDE CONNECTION 3/4" ANSI 150# RAISED FACE FLANGED END, BOTTOM END DUAL FLANGE WITH 1/2" NPT PLUG, CENTER TO CENTER: 5'-6" (1676mm), FLOAT MATERIAL 316L SS, MAX OPERATING TEMP: 284 DEG F (140 DEG C), MAX OPERATING PRESSURE: 1 TO 25 kg/cm2, SPECIFIC GRAVITY (S.G.) : 0.75 MIN, LOWER CENTER FLANGE TO BOTTOM FLANGE APPROX. 6" (160mm).TO BE ABS APPROVED TYPE & C/W ABS CERTIFICATEREFER TO SKETCH 03



Union 90 deg Elbow, JIC (Male) 37 deg Flare / 37 deg Flare, SS316, c/w Nut, Sleeve, Parker Triple-lok ETX or eq.

Male Connector, 1 5/16"-12 JIC 37 deg Male x 1" NPT Male, SS316, c/w Nut, Sleeve, Parker Triple-lok FTX or eq.

Bulkhead Union, JIC (Male) 37 deg Flare / 37 deg Flare, SS316, c/w Nut, Sleeve, Parker Triple-lok WTX or eq.

PRESSURE GAUGE, 4" DIAL FACE, NPT MALE CONNECTION, LOWER MOUNT, RANGE 0 TO ∅150 PSI, LIQUID FILLED TYPE

PRESSURE GAUGE, 4" DIAL FACE, NPT MALE CONNECTION, LOWER MOUNT, RANGE 0 TO ∅150 PSI, LIQUID FILLED TYPE

PRESSURE GAUGE 4" DIAL FACE, NPT MALE CONNECTION, LOWER MOUNT, RANGE 0 TO 150 ∅PSI, DIAPHRAGM TYPE & LIQUID FILLED TYPE

Rosebox Strainer, Make from 6mm THK. Perforation Sheet Metal 9.5mmØ x 12.7 P.C.D., Collar Clamp connection, Hot Dipped Galvanized.

SOUNDING CAP (BRASS/BRONZE), SCR'D CAP C/W BRASS CHAIN AS PER 04-TS-02 TYPE-B, REF. PIPING CONSTRUCTION STD.

SOUNDING TOP PLUG & COUPLING AS PER AS PER 04-TS-01 REF PIPING CONSTRUCTION STD.

Simplex Basket Strainer, Flanged Ends, 150#, BRZ Body ASTM B62, C/W SS 316 Strainer 1/16" Perforation

Simplex Basket Strainer, Flanged Ends, 150#, CS Body ASTM A216 GR.WCB, C/W SS 316 Strainer 1/8" Perforation

HEAVY DUTY GLASS THERMOMETER, STRAIGHT TYPE, STEM 2 1/2" LENGTH C/W THERMOWELL, RANGE 0 TO 160 DEGREE C

Y-Strainer, Flanged ends, 150#, carbon steel body and stainless steel screen A216 WCB c/w 1/8" dia. Perforation

Y-Strainer, Threaded Ends, 150#, Bronze Body ASTM B62 and Stainless Steel Screen c/w 1/8" dia. Perforation

material control

Documents