master poplist - sashco

Master

POPLIST

800-767-5656 • www.sashco.com

May 2015

A comprehensive guide to literature and point-of-purchase items available by brand

Keep up with SashcoInc.

POPLISTMay 2015


Literature & POP Sales Tools

Product BrochureBIGBROCH

Description:Big Stretch® is a high-performance water-based elastomeric sealant with powerful adhesion and superior elasticity. It spans gaps up to 2” wide and stretches up to 500% of original joint size without cracking. Big Stretch won’t crack…it just stretches.

Where to Use:Interior and exterior applications, including: •Windows •Doors •Siding •Vents •Soffits •Baseboards •Eaves •CrownMoulding •Sound-proofinginteriorwalls

ADheres to: (allconformtoASTMC794)Mostbuildingmaterialsincluding: Metals •Aluminum •Brass •Steel •AnodizedWindows plastics •ABS •Lexan®* •AcrylicSheet •Plexiglass •PVC •Fiberglass •Urethane •Vinyl •Polycarbonate •Polystyrene •Nylon Other Surfaces •Asphalt •Tile •CinderBlock •Corian®* •Wood •Formica®* •Glass •Mortar •HotmeltButyl•Stucco •Brick •Concrete •Stone •EIFS •FiberCement •Drywall

TECHNICAL DATA

colors: •White •Tan •Redwood •Gray •Woodtone •Clear •DarkBrown •Black •PineGreen •Ironstone •Limestone •SlateGray •Almond

Visitwww.sashco.comforacolorcompatibility chart that matches Big Stretch colorstovariousvinylwindowmanufacturers’colors.

pAckAging: •10.5oz.plasticcartridges •29oz.fibercartridges(whiteonly)

coverAge:A10.5oz.cartridgewillyieldapprox.26linealfeetwitha¼”(6mm)bead.

pAintAbility:Paintablewithexteriorlatexpaints/stainsafter4hoursandinteriorlatexpaints/stainsafter24-48hours(moreforhumidcondi-tions).Paintablewithmostexterioroil-basedpaints/stainsafter1week.Note:somelow-end,flatlatexpaintsmaycrack,regardlessofcure time.* Corian®, Lexan®, and Formica® are registered trademarks of their respective owners.

FeAtUres beneFits•Superelastic,movesinsteadoftears Eliminatescostlycallbacks•Spansgapsupto2”widewithnoslump Stayswhereit’sapplied•Powerfuladhesion Won’ttearorpullaway•Highdurability Performswellinmostanytypeofclimate•Water-based Easytotoolandcleanup•LowVOC MeetsstrictestVOCrequirements; environmentallyfriendly•Superbpaintability Compatiblewithlatexpaintandmost oil-based paints, sealers and stains •Freeze-thawstable Simplythaw&apply,nowastedproduct•LimitedLifetimeWarranty Haveconfidencethatyou’reusing the right product•Full10.5oz.ineverycartridge Moreforyourmoney•Won’tcausepaintgloss Nomoreshinycaulklines•Exclusivestopflowplunger Lesswaste,lessmess

Won’t Crack. . . It Just Stretches

Technical Data SheetBIGDATATEC

Won’t Crack . . . It Just Stretches

Windows

Doors

Siding

Channel StripBIGCHSTRIP

Color ChartBIGCLRCHRT

Big Stretch BlockBIGBLOCK

Channel StickerBIGCHNLSTKR

POPLISTMay 2015


DESCRIPTION:Super-elastic. Superior adhesion. Paintable. It seals around anything: tubs and shower stalls, sinks and counter tops, window frames and door frames, PVC and metal pipes. Apply to wet or dry surfaces, indoors and outdoors. It’s tough and can handle up to 400% joint movement. It’s scrubbable. It sticks to just about anything. Lexel clear sealant is 19 times clearer than silicone and won’t yellow or cloud up over time. Lexel won’t let you down.

WHERE TO USE:In most any place you’d use silicone, including:•Kitchensandbathrooms,includingfixtures, countertops and backsplashes•Onwallpaperedgestopreventcurling•Aroundtrim,windows,doors,thresholds, sills, siding, vents, pipes and air conditioners•Aroundleakyductwork

*ADHERES TO: (all conform to ASTM C794)Most building materials including: Metals •Aluminum •Brass •Steel •Copper •Silver Plastics •ABS •Vinyl •Nylon •PVC •Fiberglass •AcrylicSheet •Lexan®** •Nylon •Plexiglass •Polycarbonate

TECHNICAL DATA

OTHER SURFACES: •Asphalt •Stone •CeramicTile •Concrete •Drywall •Formica®** •Glass •Stucco •FiberCement •Wood •EIFS •AlkydStain •Corian®** •Brick •Cloth/Canvas •Cement •Mortar •Porcelain •Thinset

COLORS: •Clear •White(WhitenotavailableinCA) •WhiteVOCcompliant

PACKAGING: •10.5oz.plasticcartridges •5oz.squeezetubes

COVERAGE:A10.5oz.cartridgewillyieldapprox.26linealfeetwitha¼”(6mm)bead.

PAINTABILITY:Withlatexpaint/stainafter24-48hoursoroil-basedpaint/stainafter3-4weeks** Corian®, Lexan® and Formica® are registered trademarks of their respective owners.

FEATURES BENEFITS •19timesclearerthansilicone Nocloudinessoruglycaulklines •Superelasticwithstrongadhesion, Eliminatescostlycallbacks won’t tear, crack or pull away •Paintable Unlikesilicone,paintstickswith no separation •Water&mildew-resistant Useindoorsoroutdoors •Won’tfreeze Nowastedcaulkincoldweather •Useonwetordrysurfaces Applyinmostanyweather •Tough&easilycleaned Cleanwithabrasivecleaners with no damage •LimitedLifetimeWarranty Haveconfidencethatyou’reusing the right product •Exclusivestopflowplunger Lesswaste,lessmess •Highdurability Performs well in most any type of climate •Full10.5oz.ineverycartridge Moreforyourmoney

The Tough Elastic Sealant for Every Job

Sticks to Almost Anything*


Product BrochureLXLBROCH

Technical Data SheetLXLDATATEC

Channel StripLXLLGCHNL

Lexel BlockLXLBLOCKWOODBK

Channel StickerLXLCHNLSTKR

800-767-5656 • www.sashco.com Keep up with SashcoInc on:

Packaging SheetLXLPKG

POPLISTMay 2015



TECHNICAL DATA

ADHERES TO: Most building materials including:

Metals - Aluminum • Brass • Steel • Copper • Silver Plastics - ABS • Vinyl • Lexan®* • Polycarbonate • PVC • Fiberglass • Nylon • Acrylic sheet/Plexiglass Other Surfaces - Asphalt • Brick • Ceramic Tile • Concrete • Stone • Mortar • Stucco • Polyurethane • Glass • Terra Cotta • Cement • Wood • Cloth/Canvas • Polyisobutylene • EPDM rubber (may wrinkle)

COLOR: Clear

PACKAGING: • Cartridge grade: 10.5 oz. cartridges • Brush grade: 1 quart and 1 gallon containers • Brush grade: 1 quart and 1 gallon VOC compliant containers

COVERAGE: A 10.5 oz. cartridge will cover approx. 30 lineal feet with a ¼” (6mm) bead. A quart can will cover approx. 3 sq. ft. at 1/8” thick.* Lexan® is a registered trademark of its respective owner.

FEATURES BENEFITS Elastomeric with powerful adhesion – stretches, won’t tear, Eliminates costly call backs and re-work crack or pull away Ultra clear Blends in with roof, won’t stick out Excellent UV resistance Goes on clear, stays clear Lasts 20 times longer than asphalt Costs much less over time, no re-dos Can be applied to wet surfaces & immediately exposed Apply in almost any weather to rain or snow Adheres to most existing roof patches No extra work to remove old patches Won’t freeze No wasted caulk in cold weather Limited Lifetime Warranty Have confidence that you’re using the right product Exclusive stop-flow plunger Less waste, less mess Paintable Unlike silicone, paint sticks Water & mildew-resistant Long lasting High durability Performs well in most any type of climate Full 10.5 oz. in every cartridge More for your money Waterproof Instantly stops leaks in standing water & cold temps

DESCRIPTION: Through the Roof!® is the clear, ultra-elastic sealant made to permanently stop and prevent roof leaks. It effectively seals around a variety of roof fixtures without the messy look of asphalt. Plus, Through the Roof! won’t dry hard and crack like traditional asphalt repair products, and lasts 20 times longer! It expands and contracts with temperature changes, leaving you with a repair that sticks but won’t stick out. Conforms to ASTM C794.

WHERE TO USE: Around common roofing fixtures, including: • Galvanized metal and aluminum flashing • PVC and ABS vent pipe, skylights, gutters, downspouts, ductwork and vents • Chimneys, brick, block and mortar • Glue down shingles and front edges of flat roof tiles (cedar shake, asphalt, cement, slate and glazed tile) • Metal RV roofs • Rubber roof membranes (may warp) • Roof jacks, cables and air conditioning units

PAINTABILITY: With latex paint/stain after 24 hrs. or oil-based paint/stain after 1 week.

Seals Leaks that Asphalt Can’t!

Seals everything that goes

Seals Leaks the Asphalt Can’t!


Also available in 10.5 fl. oz. cartridges, gallon cans, low VOC quart cans, and low VOC gallon cans.

The Resultsare Clear!

In retail market tests, the clear container increased sales of all Through The Roof!®

SKUs when merchandised together.

• Clear waterproof sealant• Repels water immediately• Can be applied in cold temperatures• Highly elastic – will not crack• Expands & contracts with temperature changes

Vents Shingles

Gutters Flashing

DANGER: Flammable. Turn off pilot lights and other ignition sources. Do not use electrical devices such as switches, motors, etc. Avoid using metal tools or objects, as they could cause sparks.

Vapor harmful. Harmful or fatal if swallowed. Call physician immediately. Contains toluene and other petroleum distillates. Keep away from heat, open flame and chimney embers. When using, do not eat, drink or smoke. Use only in a well-ventilated area. May be harmful if inhaled. May affect the brain or nervous system causing dizziness, headache, or nausea. Avoid breathing vapors. Keep container tightly closed when not in use.

First Aid: If you experience difficulty breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with water for 15 minutes and get medical attention. In case of skin contact, wash thoroughly with citrus-based cleaner. Remove contaminated clothing and wash right away. Call doctor if skin irritation persists. If swallowed, get medical attention immediately. Do not induce vomiting.

KEEP OUT OF REACH OF CHILDREN! Refer to the MSDS for this product as needed. Notice: Reports have indicated that repeated and prolonged occupational overexposure to solvents can lead to permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the vapors from this product may be harmful or fatal.

WARNING: This product contains a material which is known by the State of California to cause birth defects or reproductive harm.

Limited Lifetime Warranty Sashco warrants this product will substantially meet published specifications on the date of sale. If it fails to do so, return unused portion with original sales receipt for replacement or refund, at Sashco’s sole option. These are purchaser’s sole and exclusive remedies for any breach of warranty. Purchaser must determine suitability of product for purchaser’s specific needs and assumes all risk associated with its use.

For a detailed description of the warranty and exclusions, please visit our website at www.sashco.com.

Alyster Plunger10.5 cartridges come with Sashco’s unique Alyster plunger. A flexible telescopic diaphragm not only stops material flow, it actually pulls material back into the nozzle!• Tight Seal – Increases shelf life and minimizes leakage.

• Stop Flow – The flexible telescopic diaphragm assures that material flow will stop when caulk gun pressure is released.

Typical PropertiesPROPERTY VALUEColor: ClearPackaging: 10.5 oz. plastic cartridge, 1 quart and 1 gallon containersJoint Size: Cartridge - up to 2” wide; Brush grade - N/APaintability: With latex paint/stain in 24 hours or oil-based paint/stain after 1 weekClarity (NTU): Cartridge grade - < 13; Brush grade - < 15Application Range: 0°F to 120°F (-18°C to 49°C) surface temperatureService Range: -25°F to 180°F (-34°C to 82°C)Tensile Properties: Cartridge - Recovery at 50% stretch: 96% in 1 minute at 100% stretch: 96% in 1 minute Brush - Recovery at 50% stretch: 100% in 3 minutes at 100% stretch: 96% in 5 minutesVOC Cartridge: 390 g/L Brush: 524 g/ L Low VOC brush: <300 g/L

PROPERTY RESULTS TEST METHODHardness, Shore A Cartridge - 35; ASTM C661(21-day cure) Brush - 33 Slump Cartridge - < 1/8” ASTM D2202 Brush - slumps Solids Cartridge: 55.9% by wt. ASTM C1250 Brush: 36.1% by wt. Low VOC brush: 45.2% by wt.Extrusion Rate Cartridge - 80 g/min ASTM C603 (1/8” orifice at 40 psi) Brush grade - N/ACured 1 week (dependent on ASTM C679 temperature, humidity and bead size/thickness)Tack-free 30 minutes ASTM C679Low Temp. Flexibility Pass ASTM C734Freeze-Thaw Stable Won’t freeze ASTM C731Adhesion-in-peel See “ADHERES TO” ASTM C794 Passing Substrates section inside this brochure SPECIFICATIONS:• Meets FHA requirements.

The data reported here is believed to be reliable. No warranty is made concerning its accuracy of the results obtained from its use.

Seals Leaks that Asphalt Can’t!

10300 E. 107th Place Brighton, CO 80601

800-767-5656

Keep up with Sashcoinc on:

TRF 002 12-14

www.sashco.com

Seals everything that goes

Product BrochureTRFBROCH

Technical Data SheetTRFDATATEC

Clear Quart Packaging SheetTRFCLRQTPKG

Through the Roof! BlockTRFBLOCKGRYBK

Channel StripTRFCHSTRIP

Channel StickerTRFCHNLSTKR


DESCRIPTION:Forget the concrete powder, mix bucket, & big trowel. Just squeeze in Mor-Flexx to repair crumbly mortar, cracked stucco, or textured walls. It’s simple, it’s fast, it works. Mor-Flexx may look like mortar and stucco but it stretch-es like rubber, staying elastic year after year. Mor-Flexx cleans up easily with water. No extra chemicals needed. It’s paintable so you can match the color to your surface, and its texture mimics that of real mortar and stucco.

ADHERES TO: (all conform to ASTM C794)Most building materials including: Metals •Aluminum •Steel •AnodizedWindows •Brass Plastics •PVC •Vinyl Other Surfaces •Tile •CinderBlock •Wood •Mortar •Stucco •Concrete •Brick •Stone •FiberCement •EIFS •Drywall

TECHNICAL DATA

WHERE TO USE:Whereatextured,mortarlookisdesired.

COLORS: •Beige •Gray PACKAGING: •10.5oz.plasticcartridges COVERAGE:A10.5oz.cartridgewillyieldapprox. 26 lineal feet with a ¼” (6 mm) bead.

PAINTABILITY:Withexteriorlatexpaintsafter4hours(willtake longer in cool, humid conditions). Allow1weekdryingtimebeforeapplyingoil-based paints, sealers, or stains. Some interiorandexteriorlow-end,flatlatexpaints may crack over Mor-Flexx, so test inaninconspicuousareafirst.

Looks Like Mortar – Stretches Like Rubber

FEATURES BENEFITS •Elastomericwithpowerfuladhesion Eliminatescostlycallbacks - stretches, won’t tear, crack or pull away •Useinjointsupto3”widewithnoslump Stayswhereit’sapplied •Textured Blendsinwithstucco,mortarorgrout •Water-based Easytotoolandclean-up •Paintable Easytomakethefixdisappear •Freeze-thawstable Simply thaw and apply, no wasted product •LimitedLifetimeWarranty Haveconfidencethatyou’reusing the right product •Full10.5oz.ineverycartridge Moreforyourmoney •LowVOC MeetsstrictestVOCrequirements; environmentally friendly •Highdurability Performswellinmostanytypeofclimate•Exclusivestopflowplunger Lesswaste,lessmess


Technical Data SheetFLXDATATEC

Channel StripFLXCHSTRIP

Mor-Flexx BlockFLXBLOCK

Color CardFLXCLRCARD

Channel StickerFLXCHNLSTKR

POPLISTMay 2015

• Now front & center: Sashco, Products That Work

• Bright, clean package design helps product stand out on the shelf

• It’s simple, it’s fast, it works

800-767-5656•www.sashco.com

NewLabelDesign!

• Available in Gray or Beige

• Paintable

• Textured to match mortar, stucco & concrete surfaces

• Mor-Flexx may look like mortar, but it stretches like rubber, staying elastic year after year

• Get more! 10.5 fl. oz. of product

CheckOuttheNewLabel!Samegreatformula!

Keep up with SashcoInc on:

FLXPKG3-15

New Packaging SheetFLXPKG

Product BrochureFLXBROCH

POPLISTMay 2015


Product BrochureSLBBROCH

Technical Data SheetSLBDATATEC

Channel StripSLBCHSTRIP

Slab BlockSLBBLOCK

First Aid: EYES: Immediately flush with large quantities of water for at least 15 minutes. If irritation persists, see a medical doctor. SKIN: Wash with soap and water and rinse thoroughly. Wash contaminated clothing before use. INHALATION: Remove to fresh air. INGESTION: If large quantities are swallowed, DO NOT INDUCE VOMITING - seek medical help immediately. Keep out of reach of children. Refer to the MSDS for this product as needed.

WARNING: This product contains crystalline silica sand, which is known by the State of California to cause cancer.

Limited Lifetime Warranty Sashco warrants this product will substantially meet published specifications on the date of sale. If it fails to do so, return unused portion with original sales receipt for replacement or refund, at Sashco's sole option. These are purchaser's sole and exclusive remedies for any breach of warranty. Purchaser must determine suitability of product for purchaser's specific needs and assumes all risk associated with its use. Sashco will not be liable for direct or indirect damages.

Except as stated above there are no warranties for this product. The foregoing express warranty is in lieu of all other warran-ties, express or implied, including without limitation implied warranties of merchantability or fitness for a particular purpose, which warranties are specifically excluded and disclaimed. This Limited Warranty gives you specific legal rights. You may have other rights which vary from state to state. Some states do not allow exclusion of implied warran-ties in consumer or other sales, limitations on the duration of implied warranties, or exclusion or limitation of incidental or consequential damages. Thus, the limitations or exclusions contained above may not apply to you depending upon your specific circumstances.

Typical PropertiesPROPERTY VALUEColor: GrayPackaging: 10.5 oz. plastic cartridgesJoint Size: Maximum 3” wide Note: Use appropriate size pre-caulking filler rope (backer rod) in any joint 1/2” deep or more.Paintability: With latex paint/stain in 24 hours or oil-based paint/stain after complete cure (1-3 weeks, depending on bead size, temperature & humidity)Application Range: 40°F to 120°F (4°C to 49°C) surface temperatureService Range: -30°F to 250°F (-34°C to 121°C)Tensile Properties: Recovery at 50% stretch: 96% in 1 minute Recovery at 100% stretch: 96% in 1 minuteMax Elongation: 300%VOC <1.5 by weight, 58 g/L, CA compliant

PROPERTY RESULTS TEST METHODHardness, Shore A 32 (21-day cure) ASTM C661Slump < 1/8” ASTM D2202Solids 78% by wt. ASTM C1250Extrusion Rate 750 g/min. (1/8‘ orifice at 40 psi) ASTM C603Cured 1 week (dependent on ASTM C679 temperature, humidity and bead size/thickness)Tack-free less than 30 minutes ASTM C679Low Temp. Flexibility Pass (not artificially weathered) ASTM C734Freeze-Thaw Stability Passes 10 cycles 0°F to 70°F (-18°C to 21°C) ASTM C731Adhesion-in-peel See “ADHERES TO” ASTM C794Passing Substrates section inside this brochure

SPECIFICATIONS:

• Meets FHA requirements.• Meets or exceeds Federal Specification ASTM C834, TT-S-00230 C The data reported here are believed to be reliable. No warranty is made concerning the accuracy of or the results obtained from their use.

• Superior adhesion & flexibility – won’t crack or pull away

• Color-matched to concrete• Easy water clean-up

Alyster Plunger10.5 oz. cartridges come with Sashco’s unique Alyster plunger. A flexible telescopic diaphragm not only stops material flow, it actually pulls material back into the nozzle!

• Tight Seal – Increases shelf life and minimizes leakage.• Stop Flow – The flexible telescopic diaphragm assures that material flow will stop when caulk gun pressure is released.

Check out other high-performance Sashco products.From chimney to foundation, the best wood stain & sealant solutions.


800-767-5656


www.sashco.com

SLB 002 09-14

Sidewalks

Driveways

Expansion iointsJ

Channel StickerSLBCHNLSTKR

DESCRIPTION:Slab® is the concrete crack repair sealant you’ve been waiting for.Some concrete repair products are tough, but don’t stick, while others are flexible but don’t last. Slab combines the durability, flexibility and adhesion you need for lasting concrete crack repairs. This easy-to-apply, 100% acrylic latex water-based product is textured to simulate concrete so repairs blend in. Plus, Slab contains no isocyanates or solvents, which means it’s easy on your nose and on our planet.

WHERE TO USE:Repair large or small cracks in concrete, brick or stone on: • Sidewalks • Garages & Sheds • Driveways • Patios

ADHERES TO: (all conform to ASTM C794) • Asphalt* • Brick • Mortar • Concrete • Stone • Stucco • EIFS • Wood • Cinder Block

TECHNICAL DATA

COLORS: • Gray

PACKAGING: • 10.5 oz. plastic cartridges

COVERAGE:One cartridge will cover approx. 26 lineal feet with a 1/4” (6mm) bead.

PAINTABILITY:With latex paint/stain after 24 hours or oil-based paint/stain after complete cure (1-3 weeks, depending on bead size, temperature & humidity)

FEATURES• Extremely elastic in most temps – moves,

won’t crack, even when cold

• Powerful adhesion

• Spans gaps up to 3” wide with no slump

• High durability

• Water based

• Ultra low VOC, no isocyanates

• Freeze-thaw stable

• Exclusive stop-flow plunger

• Full 10.5 oz. in every cartridge

• Limited Lifetime Warranty

BENEFITSEliminates frequent repairs

Won’t tear or pull away

Stays where it’s applied

Performs long-term in most climates

Easy to tool and clean up

Meets strictest VOC requirements (including southern CA); environmentally friendly; no harsh chemical smells

No wasted caulk in cold weather

Less waste, less mess

More for your money

Have confidence that you’re using the right product

*Be aware that asphalt is a weak substrate. Slab will hold its seal, but the asphalt may lose adhesion to itself over time.


Slab Putty Knife16555

Moulding

Backsplashes

Anywhere tomatch color

Tintable Caulk. Just Add Paint.


Product BrochureXCTBROCH

Technical Data SheetXCTDATATEC

Channel StripXCTCHNLSTRIP eXact color 3D Block

XCT3DBLOCK

sealantTintable Caulk. Just Add Paint.

XCT002 4-14

Clean-Up & StorageClean up any fresh product on surfaces and skin with soap and water. Flush the paint measuring syringe with soap and water.

Store eXact color® in a cool, dry location. Once mixed, use any remaining product within one year.

CautionCarefully handle the activator! Keep away from skin and eyes. If skin or eye contact occurs, flush with large amounts of water. Once the activator is mixed into the sealant base it is safe for handling. Immediately discard the activator packaging and keep away from children. See the MSDS for additional details.

Alyster Plunger9.5 oz. cartridges come with a unique Alyster plunger. A flexible telescopic diaphragm not only stops material flow, it actually

pulls material back into the nozzle!

• Tight Seal—Increases shelf life and minimizes leakage.• Stop Flow—The flexible telescopic diaphragm assures

that material flow will stop when caulk gun pressure is released.

Limited Lifetime WarrantySashco warrants this product will substantially meet published specifications on the date of sale. If it fails to do so, return unused portion with original sales receipt for replacement or refund, at Sashco’s sole option. These are purchaser’s sole and exclusive remedies for any breach of warranty. Purchaser must determine suitability of product for purchaser’s specific needs and assumes all risk associ-ated with its use. Sashco will not be liable for direct or indirect damages.

For a detailed description of the warranty and exclusions, please visit our website at www.sashco.com.

sealantTintable Caulk. Just Add Paint.

Tintable Color Caulking – Just Add Paint!

TYPICAL PROPERTIES: Property ValuePackaging 9.5 fl. oz. plastic cartridge (final yield after mixing), 1 activator pack, 1 measuring syringe, 1 nozzle, 1 clear cap–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Joint Size Maximum 2”–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Application Range 40˚F to 90˚F (4°C to 32°C) surface temp.–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Service Range -30˚F to 250˚F (-34°C to 121°C)–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Tensile Properties Recovery at 50% stretch: 100% in 3 minutes Recovery at 100% stretch: 96% in 5 minutes–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

VOC 79.4 g/L, <1.5% by weight (once the activator is added to the sealant base) • pH of sealant base before use: 6.7 • pH of activator: 12 • pH of mixed sealant ~8.5 (depending on pH of paint or stain added to sealant base) –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Viscosity < 50,000 cps. (sealant base before thickened)–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Density of sealant base 8.6 lbs./gal. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

TEST DATA: Property Results Test Method Durability 12.5% joint movement ASTM C719 (10 cycles @ -15°F (-26°C))–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Hardness, Shore A 33 (21-day cure) ASTM C661–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Slump < 1/8” ASTM D2202–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Solids 55.6% by weight (of sealant base) ASTM C1250 59.7% by volume–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Extrusion Rate 750 g/min (1/8” orifice at 40 psi) ASTM C603–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Freeze-Thaw Stability 3 cycles max at 0°F. No ASTM C731 freeze/thaw stability at -15°F. Keep from freezing–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Low Temp. Flexibility Pass (not artificially weathered) ASTM C734–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Tack-free Less than 30 minutes ASTM C679–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Cured 4-5 days (dependent on temp., ASTM C679 humidity and bead size)–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Adhesion-in-peel** Concrete • Glass ASTM C794Passing Substrates PVC • Wood • Tile –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

** Not comprehensive. Contact Sashco with questions about other substrates. SPECIFICATIONS: • Meets FHA requirements. • Meets the performance requirements of ASTM C834 • Meets or exceeds Federal Specification TT-S-00230 C

The data reported here is believed to be reliable. No warranty is made concerning the accuracy of or the results obtained from its use.*McKanica® and Kynar® are registered trademarks of their respective owners.KEEP OUT OF REACH OF CHILDREN.


800-767-5656


www.sashco.com

Channel StickerXCTCHNLSTKR

DESCRIPTION:eXact color™ is the easiest and fastest way to create a custom color caulk. This 100% water-based acrylic latex sealant requires no special tools. Simply mix in any latex paint, stain or universal pigments and apply in joints up to 1/2” wide to get an exact match.

WHERE TO USE:Interior applications, including: •Walls •Wallpaper •Tile •Backsplashes •Woodorvinylmolding&baseboards

ADHERES TO: (all conform to ASTM C794)Most building materials including: Metals •Aluminum •Brass •Steel •AnodizedWindows Plastics •ABS •Lexan®* •AcrylicSheet •Plexiglass •PVC •Fiberglass •Urethane •Vinyl •Polycarbonate •Polystyrene •Nylon Other Surfaces •Drywall •Tile •CinderBlock •Corian®* •Wood •Formica®* •Glass •Mortar •FiberCement•Stucco •Brick •Concrete •Stone •EIFS COLORS:Infinitepossibilities.Simplymixinanylatexpaint, stain or universal pigments.

TECHNICAL DATA

PACKAGING:9.5oz.plasticcartridges(finalyieldafter mixing), 1 activator pack, 1 measuringsyringe,1nozzle,1clearcap

COVERAGE:A9.5oz.cartridgewillyieldapprox.20linealfeet with a 1/4” (6 mm) bead

PAINTABILITY:Withexteriorlatexpaintsafter4hours(willtake longer in cool, humid conditions). Allow 1 week drying time before applying oil-based paints, sealers, or stains. Some interior and exteriorlow-end,flatlatexpaintsmaycrackover eXact color, so test in an inconspicuous areafirst.

WHERE NOT TO USE: •Areasofwatersubmersionor frequent, prolonged puddling • Areaswithhighfootand/orvehicletraffic

(driveways, sidewalks, decks, patios, etc.) •Roofsexposedtoprolonged dampness (use Sashco’s Through TheRoof!® instead) • Willnotadheretoorisincompatible

with Kynar®*,Polypropylene,Waxes, Polyethylene,andSilicone.

•MaydiscolorCopper* Corian®, Lexan®, and Formica® are registered trademarks of their respective owners.

U.S.PatentNo.8,100,296andotherpatentspending

FEATURES: BENEFITS: •Unlimitedcoloroptions,evenmetallics! An exact match every time Just add latex paint •Nospecialtoolsrequired Allyouneedisinonekit •Easytouse Mixin3minutes,usein30–savetime •Water-basedacrylic Easytotool&clean-up; environmentally friendly •Superelasticwithpowerfuladhesion Eliminatescostlycallbacks Won’tpullawayorcrack•Exclusivestopflowplunger Lesswaste,lessmess

™

www.sashco.com800-767-5656

®

®from the makers of Big StretchTintable Caulk

Don’t paint your caulk - tint it!• Just add water-based paint or stain

Backsplashes Moulding Walls

Shelf Card(XCTSHFCARD)


Description: ✓ �Made�of�glass�reinforced�nylon

✓ �2�pieces�(bottom�&�top)

✓ �6�black�weighted�cartridges� to�be�used�for�balancing�the� holder�when�mixing�fewer�than� 7 cartridges

✓ �Mix�as�many�as�7�cartridges�or� as�few�as�one

✓ �Mix�multiple�colors�all�at�one�time

Easy to Use:1 Place�cartridges�in�the�molded�

bottom�slots

2 Pop tops off the cartridges

3 Inject�paint�with�supplied�syringe,� twist�on�caps

4 Place molded top of cartridges

5� Mix�for�1-2�minutes

6 Replace�molded�top�on�cartridges

8 Mix�for�1-2�minutes

Voila! eXact color Sealant

eXact color Quick Shake–G/O for Gyroscopic/Oscillating Mixer

800-767-5656 • www.sashco.com Keep up with SashcoInc.

EXTQSGO2-15

Description: ✓ Made of schedule 80 PVC plastic

✓ 1 solid holder with cavities for up to 7 cartridges

✓ �1�fiber-reinforced�neoprene�v-cap�with Velcro straps

✓ �2�strips�Velcro�self-adhesive�hook�material�for�attachment�to�the�metal�mixer�basket

✓ �6�black�weighted�cartridges� to�be�used�for�balancing�the� holder�when�mixing�fewer� than�7�cartridges

✓ �Mix�as�many�as�7�cartridges�or�as�few�as�one

✓ Mix�multiple�colors�all�at�one�time

Easy to Use:1 Apply�Velcro�strips�to�pail�holder2� Insert�eXact�color�cartridges�into�the�v-holder3 Pop�tops�off�the�cartridges,�inject�paint�with�supplied�syringe,�twist�on�caps4 Place�v-cap�over�the�cartridges,�secure�the�Velcro�straps5� Place�v-holder�into�the�paint�basket6 Spin�for�1-2�minutes7 Twist off caps, add activator, replace caps8 Spin�for�1-2�minutes

Voila! eXact color Sealant

eXact color Quick Shake–V for Vortex Shaker

800-767-5656 • www.sashco.com Keep up with SashcoInc.

EXTQSV2-15

POPLISTMay 2015

Quick Shake-V Sell SheetXCTQSV

Quick Shake-G/O Sell SheetXCTQSGO


Product BrochureDEWBROCH

Technical Data SheetDEWDATATEC

POPLISTMay 2015


INFO SHEET

Conceal Textured Caulk for Wood Conceal textured caulk delivers performance that’s hard to see. Conceal’s 7 colors blend in with the most popular stains used on log and wood homes, and Conceal’s light texture simulates the natural roughness of wood. The combination of color and texture makes it hard to see where the caulking ends and the wood begins. Instead, they just blend together. Although the caulking is hard to see, Conceal delivers performance. It outperforms all other textured caulks currently available. Additionally, Conceal. . . • Cleans up with soap and water• Is resistant to rainfall in 1-4 hours• Has a limited lifetime warranty• Has superior elongation, memory and adhesion

Fundamental Caulking Application Guidelines• Proper substrate preparation and application are

imperative for product longevity. Read this entire Info Sheet (CNL 002) before applying any product.

• Conceal is not a chinking and should be used in joints under 2” wide. If the joints are wider, we recommend either Log Jam or Chinker’s Edge.

• Make certain there is compatibility between your stain and Conceal. We recommend Sashco’s Capture®/Cascade®, High Sierra®, or Transformation® stains for exterior applications and Symphony® interior clear coat for beautiful long-term protection. Best results are obtained when Conceal is applied to clean, stained wood. Call Sashco at 1-800-767-5656 for guidance.

• Check the weather forecast. Finishing products are best applied in moderate weather conditions, i.e., out of direct sunlight, in dry, warm conditions.

• Check the surface temperature. It should be between 40˚-90˚F (4˚-32˚C).

• It is always best to use a bond breaker (usually backer rod) before caulking. Sashco strongly recom-mends the use of backer rod, especially if the home is new and/or the wood is subject to significant movement. If a bond breaker is not used, expect more caulking repairs.

• Tool Conceal to help ensure good contact with the wood surfaces. This will greatly aid adhesion.

• Ideal caulk depth is half of the joint width, but no less than 1/4” and no more than 1/2”.

• Assemble tools and equipment: - Backer rod - Caulking guns - Trowels, spatulas, or foam brushes for tooling - Clean water and rags - Plastic sheets to cover the caulking if wet

weather moves in - Staple gun & staples (if necessary to help with

backer rod installation)• If you have any questions about application, watch

our application videos at www.sashco.com or call us call us at 1-800-767-5656.

Surface Preparation Best results are obtained when Conceal is applied to wood that has been previously coated with a com-patible and thoroughly cured stain. In fact, Conceal has a Limited Lifetime Warranty when applied over any of Sashco’s stains: Capture Log Stain, High Sierra or Transformation. Call us for details on this special warranty – the best in the industry! If not using a Sashco stain, be sure to confirm its compatibility with Conceal. If the stain is older but still intact, clean the wood surfaces thoroughly to remove dirt, pollen, bird droppings, and other surface contaminants. The USDA Forest Products Laboratory and other researchers around the world have recently reported that surface wood exposed to sunlight for as little as 1-2 weeks can become significantly damaged and unsound which may lead to premature adhesive failure of coatings. Such surface wood damage has the potential to also hurt Conceal’s (or any caulk’s) adhesion. Once bare wood has been properly cleaned and prepped to remove unsound wood, stain should be applied as soon as possible. Follow with Conceal caulking. A few stains, especially those high in wax content or non-drying oils, may interfere with adhesion. Some of these coatings can hurt any caulk’s adhesion—whether applied before or after the caulk—so we advise against their use. Check with Sashco if you have questions about your particular product.

10300 E. 107th Place • Brighton, CO 806011-800-767-5656 • 303-286-7271 • www.sashco.com

11-114 1

Technical Data(Not to be considered specifications)

ColorsFrontier GoldHarvest WheatGold Tone (formerly Warm Honey)Brown Tone (formerly Golden Mesa)Red Tone (formerly Canyon Wall)Redwood (formerly Santa Fe Trail)Grizzly Brown

Packaging10.5 oz. plastic cartridges, 29 oz. fiber cartridges, and 5-gallon straight-sided pails. (Not all colors are available in all sizes.)

Application RangeSurface temp of 40˚F (4˚C) - 90˚F (32˚C)

Service Range-30˚F (-34˚C) - 250˚F (121˚C)

PaintabilityPaintable with latex coatings after a minimum of 24 hours curing (longer on wider joints) and after 5 days with most oil-based coatings. Contact Sashco for more specific guidance.

CompatibilityConceal will adhere to woods treated with most pre-servatives including borates**, pentachlorophenol, and copper compounds. Conceal is also compatible with insulating glass sealants and most building mate-rials, including foam insulation and vinyl windows.** Some borate wood preservatives contain glycols or other agents that could interfere with adhesion. Sashco’s PeneTreat contains no glycols.

SpecificationsPasses ASTM C-834, the performance requirements of TT-S-00230B and ASTM C-920 Class 25. Meets FHA requirements.

VOC<1.5% by weight, max, 42 g/L.

Cure-Through Time3 weeks (1/2” thickness, 70˚F, 50% relative humidity)

Extrusion Rate (ASTM C-603)1100 g/min (1/8” orifice at 40 psi)

Freeze-Thaw Stability (ASTM C-731)Passes 5 cycles (0˚F - 70˚F)

Hardness, Shore A (ASTM C-661)20 (21-day cure)

Elongation @ Break550%

Solids (ASTM C-1250)73% by weight, 71% by volume

Tack-Free Time (ASTM C-679)Less than 1 hour

Resistance to Substrate Staining (ASTM D-2203)None

Water ResistanceNo washout (4 hours, 40˚F, 50% relative humidity)In severe conditions - under 40˚F (4˚C) and/or 70%+ humidity – full rain resistance may take longer. Cover exterior walls with plastic if rainfall is expected with-in 24 hours after installation.Not recommended for continuous submersion or areas exposed to foot or vehicular traffic.

WeatheringWashout NoneCracking NoneDiscoloration Passes ASTM C-834

NoticeSashco will test any stain to determine compatibility with Conceal. Call us for details.

The data reported here are believed to be reliable. No warranty is made or implied concerning the accuracy or the results obtained from their use.

CONCEAL® COVERAGE RATES

JointWidth

Recommended Joint Depth

LINEAL FT.Per

5 gal. pail

Per 29 oz.

cartridge

Per 10.5 oz.

cartridge

1/4”1/4” 1540 70.0 25.7

3/8”1/4” 875 39.8 14.6

1/2”1/4” 750 34.1 12.5

5/8”3/8” 410 18.6 6.8

3/4”3/8” 280 12.7 4.7

1” 1/2” 195 8.9 3.3

Conceal BlockCNLBLOCK

Info SheetCNLDATATCH


Textured Caulk for Wood

Baseboards

Wood siding

Anything wood

Channel StripCNLCHSTRIP

Color ChartCNLCLRCHRT

DESCRIPTION:MildewFree Sealant* is a unique sealant guaranteed to prevent mildew growth on the sealant for seven years. It’s the only sealant that comes with a guarantee that includes labor costs if replacement is necessary. It creates a watertight seal and prevents mildew from forming on the sealant.

WHERE TO USE:Around common kitchen and bathroom fixtures, including: • shower surrounds, bath tubs and toilets • resetting tiles • back splashes and sinks

ADHERES TO: (all conform to ASTM C-794)Most building materials including: Metals • Aluminum • Brass • Steel Plastics • ABS • PVC • Vinyl • Plexiglass • Acrylic Sheet • Fiberglass (uncoated)

TECHNICAL DATA

Other Surfaces • Glass • Marble • Granite • Cement • Porcelain • Wood • Formica®** • Slate • Drywall • Corian 1®** • Ceramic tile

COLORS: • White • Linen

PACKAGING: • 6 oz. squeeze tubes

COVERAGE:A 6 oz. tube will cover approx. 16 lineal feet with a ¼” (6 mm) bead which is equal to one average tub enclosure.

PAINTABILITY:Paintable with latex paints/stains after 4 hours (more for humid conditions). Paint-able with most oil-based paints/stains after 1 week.** Corian1® and Formica® are registered trademarks of their respective owners.

MildewFree Sealant*** Cured sealant is mildew resistant

FEATURES BENEFITS • 7 year replacement warranty, Having confidence that you’re using including labor costs the right product; added value for client at no cost to you • Resistant to damage from abrasive cleaners Use any cleaner without worry • Maintains a water-tight seal No moisture getting behind fixtures to cause problems • Water-based Easy to tool and clean up • Low VOC Meets strictest VOC requirements; environmentally friendly • Superb paintability Compatible with latex and most oil-based paints and finishes • Elastomeric with powerful adhesion – Eliminates costly call backs stretches, won’t tear, crack or pull away

10300 E. 107th Place, Brighton, CO 80601 1-800-289-7290 • www.sashco.com MDF002 02-10

ASTM C-794 Adhesion-in Peel DataSubstrate Pass or Fail Substrate Pass or Fail

Aluminum Pass Granite PassCement Pass Marble PassCeramic Tile Pass Pine PassDrywall Pass Porcelain PassFiberglass* Pass PVC PassFormica Pass Slate PassGlass Pass Vinyl Tile Pass* Uncoated Fiberglass Only

Typical PropertiesPackaging/Colors: 6 oz. squeeze tubes, White and LinenApplication Range: Surface temperature of 40ºF to 120ºF (4ºC to 49ºC)Service Range: 0ºF to 250ºF (-18ºC to 121ºC)Specifications: Meets FHA requirements. Meets or exceeds Federal Specification ASTM C-834Solids: 77% by weightTack-free (ASTM C-679): 30 minutesPaintability: within 4 hours with water-based paints. Wait 1 week when using an oil-based paint.Water exposure: 24 hours (minimum)Full cure: 4-5 days (dependent on temperature, humidity & bead size)Freeze-thaw Stability (ASTM C-731): Passes 10 cycles 0ºF to 70ºF (-18ºC to 21ºC)Maximum Stress (psi): 128Elongation to Break (%): 200Hardness, Shore A (ASTM C-794): 55VOC: <4%, 67 g/LBoeing Slump (ASTM D-2202): <1/8”

The data reported here are believed to be reliable. No warranty is made concerning the accuracy or the results obtained from their use.

MaintenanceAs you just read earlier in the Mildew Facts section, mildew grows on surfaces as thin as a buildup of soap film. If you don’t clean off this film, mildew can grow on the film itself! To avoid this, each time that you scour your tub, use Clean Shower™ or similar products to clean the caulk bead and prevent soap film build-up.

Where to use MildewFreeMildewFree has excellent adhesion to most bathroom and kitchen materials, including:

• Tile• Glass• Drywall• Marble• Granite• Ceramic• Porcelain

Where not to use MildewFree • Sink Drains • Tub Drains • Swimming Pools • Hot Tubs • Saunas • Copper Fixtures

WarrantyGuaranteed for 7 Years to Prevent Mildew Growth on the Sealant: If mildew growth occurs on the sealant (not on soap film), within 7 years of purchase, Sashco will replace the product and provide a contractor for re-installation. Proof of purchase is required. Warranty applies to single family residential use only. No other warranties are expressed or implied. Sashco will not be responsible for consequential damages other than as stated above.

Sashco warrants this product will substantially meet published specifications on the date of sale. If it fails to do so, return unused portion with original sales receipt for replacement or refund, at Sashco’s sole option. These are purchaser’s sole and exclusive remedies for any breach of warranty. Purchaser must deter-mine suitability of product for purchaser’s specific needs and assumes all risk associated with its use.

Except as stated above there are no warranties for this product. The foregoing express warranty is in lieu of all other warranties, express or implied, including without limitation implied warranties of merchantability or fitness for a particular purpose, which warranties are specifically excluded and disclaimed. This Limited Warranty gives you specific legal rights. You may have other rights which vary from state to state. Some states do not allow exclusion of implied warranties in consumer or other sales, limitations on the duration of implied warranties, or exclusion or limitation of incidental or consequential damages. Thus, the limitations or exclusions contained above may not apply to you depending upon your specific circumstances.

MildewFree Sealant

®

Channel Sticker(CNLCHNLSTKR)

10300 E. 107th Place • Brighton, CO 80601 1-800-767-5656 • www.sashco.comCNL003 04/12

• Lightlytexturedtoblendinwithwood

• Greatadhesionandelasticity

• WorksgreatwithanySashcostain

Typical PropertiesColors: Frontier Gold, Harvest Wheat, Gold Tone, Red Tone, Brown

Tone, Redwood, Grizzly BrownPackaging: 10.5 oz. cartridges, 29 oz. cartridges and 5 gal. pailsJoint size: Up to 2" widePaintability: With latex paint/stain in 24 hours or oil-based paint/

stain after 1 weekApplication Range: Surface temp of 40°-90°F (4°C-32°C)Service Range: -30°-250°F (-34°-121°C)Tensile Properties: At 50% stretch: 100% recovery in 1 min.

At 100% stretch: 96% recovery in 1 min.VOCs: <1.5% by weight, max.

Property Results Test Method

Durability25% total joint movement (10 cycles at 15°F)

ASTM C-719

Hardness, Shore A 20 (21 day cure) ASTM C-661

Slump <1/8" ASTM D-2202

Solids 73% by weight ASTM C-1250

Extrusion Rate 1100 g/min (1/8" orifice at 40 psi) ASTM C-603

Cured

1 week (dependent on temperature, humidity and bead size/thickness)

ASTM C-679

Tack-free Less than 1 hour ASTM C-679

Low Temp. Flexibility

Pass (not artificially weathered) ASTM C-734

Freeze-Thaw Stability

Passes 10 cycles (0°-70°F) (-18° -21°C)

ASTM C-731

Adhesion-in-peel Passing Substrates

Woods — cedar, redwood, pine and similar woods, Vinyl, Engineered wood, Metals, Stone, Granite, Marble, Brick, Fiberglass, ABS, Acrylic

ASTM C-794

Specifications: • Meets FHA requirements• Meets or exceeds Federal Specification TT-S-00230 C• ASTM C-834• ASTM C-920, Type S, NS, Class 25, Use NT, M, A. Exceeds

10% weight loss.The data reported here are believed to be reliable. No warranty is made concerning the accuracy of or the results obtained from their use.

Where to use Use Conceal® anywhere you want to match the color and texture of your wood surface:• On wood siding, including pine, cedar, redwood and

many others• Around wood window and door trim• Where wood siding meets corner boards• Where wood siding meets chimneys

or brick

Where not to use Conceal• Areas of continuous submersion • Areas exposed to foot or vehicular traffic

Limited Lifetime WarrantySashco warrants this product will substantially meet published specifications on the date of sale. If it fails to do so, return unused portion with original sales receipt for replacement or refund, at Sashco’s sole option. These are purchaser’s sole and exclusive remedies for any breach of warranty. Purchaser must determine suitability of product for purchaser’s specific needs and assumes all risk associated with its use. Sashco will not be liable for direct or indirect damages.

Except as stated above there are no warranties for this product. The foregoing express warranty is in lieu of all other warranties, express or implied, including without limitation implied warranties of merchantability or fitness for a particular purpose, which warranties are specifically excluded and disclaimed. This Limited Warranty gives you specific legal rights. You may have other rights which vary from state to state. Some states do not allow exclusion of implied warranties in consumer or other sales, limitations on the duration of implied warranties, or exclusion or limitation of incidental or consequential damages. Thus, the limitations or exclusions contained above may not apply to you depending upon your specific circumstances.

Can you see the caulk?

Wood was stained, then caulked.

Product BrochureCNLBROCH



POPLISTMarch 2015

INFO SHEET

styrene board as a bond breaker.. 5. Gun the chinking over the backing material. Ideal seal-

ant depth is half of the joint width, but no less than 1/4”, nor more than 1/2”.

6. Tool Log Jam to ensure good contact with the log surfaces, especially to the upper log; this will greatly aid adhesion.

7. All chinking products may occasionally “blister”. To avoid blistering: •Donotapplyindirectsunlight. •Protectfreshchinkingfromdirectsunlightfor1-2

days after application with white plastic sheeting tacked over it.

•Fordetailedinformation,readSashco’sSavvyBulletin,“PreventingBlisters”.

ApplicationSurface Preparation

Best results are obtained when Log Jam is applied to wood that has been previously coated with a compati-ble and thoroughly cured stain. In fact, Log Jam has a Lifetime Limited Warranty when applied over any of Sashco’sstains:CaptureLogStain/Cascadestainingsys-tem,HighSierra,Transformation,orSymphonyInteriorClearCoat.Callusfordetailsonthisspecialwarranty—the best in the industry!

If you select a different stain, make certain that it is compatible with Log Jam. If the stain is older but still intact, clean the log surfaces thoroughly to remove dirt, pollen, bird droppings and other surface contaminants.

TheUSDAForestProductsLaboratoryandotherresearchers around the world have reported that surface wood exposed to sunlight for as little as 1-2 weeks can become significantly damaged and unsound, which may lead to premature adhesive failure of the stains or other coatingsappliedtoit.ItcanalsohurtLogJam’s(oranychinking’s)adhesiontothesurface.Oncebarewoodhasbeen properly cleaned and prepped to remove unsound wood,stainshouldbeappliedassoonaspossible.Followwith Log Jam chinking.

If a stain is applied over Log Jam, it will be tinted the stain color, but will be affected differently than the surrounding wood; therefore, test appearance before wide-spread use.

10300E.107thPlace•Brighton,CO80601800-767-5656•www.sashco.com

05-144 1

merchantability or fitness for a particular purpose, which war-ranties are specifically excluded and disclaimed. This Warranty gives you specific legal rights. You may have other rights which varyfromstatetostate.Somestatesdonotallowexclusionofimplied warranties in consumer or other sales, limitation on the duration of implied warranties, or exclusion or limitation of inci-dental or consequential damages. Thus, the limitations or exclu-sions contained above may not apply to you depending upon your specific circumstances.

10-Year WarrantyWhenappliedinaccordancewiththeDataTecsheetLJC002,SashcoSealantswarrantsLogJamforthefollowingitemsfor10years:1)Itwillnotpullawayfromlogsurfaces2)Itwillremainelasticandstretchupto100%(+/-50%)oftheoriginaljointsize. If Log Jam fails to perform as specified above, return proof of pur-chaseandSashcowillfurnishproducttorepairthedamagedareas.This warranty includes product replacement only. Labor costs for application of any product are specifically excluded. No other warrantiesareexpressedorimplied.Sashco,Inc.reservestherighttoinspectthestructurepriortoanyproductreplacement.(Specialcolormatchesexcluded.)ContactSashcoforinformationontheLimited Lifetime Warranty.

Sinceitsintroductionin1985,LogJamchinkinghasbeentherecognizedindustry standard in elasticity, adhe-sionanddurability.Here’swhy:•Log Jam moves with your logs and

sticks like no other, eliminating costly repairs.

•Log Jam has superior early water resistance. No more worrying about that unexpected rain storm.

•LogJamwon’teatawayatStyrofoambeadboard.Nomoreunsightly chinking lines that look

dented and deformed – just the rustic, traditional look of mortar you want.•Log Jam has been used on thousands of log homes

throughout the world. Backed by a limited lifetime guar-antee,youcanbeconfidentthatyou’reusingtherightproduct for your dream home.

When other chinking pulls away, leaving your home vul-nerable to weather, air infiltration and insects, Log Jam is still maintaining the tight seal it had when first applied.

Fundamental Chinking Application Guidelines

Propersubstratepreparationandapplicationare imperative for product longevity. Read this instruction sheet,LJC002,beforeapplyinganyproduct.1. Best results are obtained when Log Jam is applied to

clean, dry, stained wood. Make certain there is compat-ibility between your stain and Log Jam. Log Jam has alifetimewarrantywhenappliedwithSashco’sstains:CaptureLogStain/Cascadestainingsystem,HighSierra,TransformationandSymphonyInteriorClearCoat.Ifusingadifferentstainorfinish,contactSashcoforguidance.Call1-800-767-5656,orvisitandchatliveat www.sashco.com.

2.Checktheweatherforecast.Finishingproductsarebestapplied in moderate weather conditions, i.e., out of direct sunlight, in dry, warm conditions.

3.Checkthelogsurfacetemperature.Thesurfacetempera-tureshouldbebetween40˚-90˚F(4˚-32˚C).

4. Install a bond breaker before Log Jam is applied. Backer rod,GripStrip,andclearpackingtapeallperformthisfunction well. If Log Jam is applied over white styrene bead-board or Tyvek house wrap, it is best to cover the bead-board or wrinkle-free house wrap with clear pack-ingtape(topreventadhesiontothosematerials).Wedonot recommend the use of blue or pink extruded poly-

Log Jam holds its seal.

Competitive brand.

Technical Data(Nottobeconsideredspecifications)

ColorsMortarWhite,WhiteWhite,Buff,Tan,Gray,WoodtoneCedar

Packaging5-gallonstraightsidedpailsand29oz.fibercartridges

Application Range40˚–90˚F(4˚–32˚C)

Service Range-30˚–250˚F(-34˚–121˚C)

Jog Jam Coverage Rate

PaintabilityPaintablewithlatexcoatingsafteraminimumof24hourscuring(longeronwiderjoints)andafter5dayswithmostoil-basedcoatings.ContactSashcoformorespecificguidance.

CompatibilityLog Jam will adhere to woods treated with most preservatives includ-ing borates**, pentachlorophenol, and copper compounds. Log Jam is also compatible with insulating glass sealants and most building mate-rials, including foam insulation and vinyl windows.** Some borate wood preservatives contain glycols or other agents that could interfere with adhesion. Sashco’s PeneTreat® contains no glycols.

SpecificationsPassesASTMC-834,ASTMG-53QUV,ASTMD-638andASTMC-920

VOC48.4g/L,lessthan1.5%byweight,max.

Tack-Free TimeLessthan30min.(70˚F,50%relativehumidity)

Cure-Through Time3weeks(1/2”thickness,70˚F,50%relativehumidity)

Extrusion Rate800g/min(1/8”orificeat40psi)

Freeze-ThawPasses5cycles(0˚F-70˚F)

Hardness, Shore A29


Slump1/16”(max.)intestjoint(3.5”Hx¾”D)at70˚F

StainNone

Water ResistanceNowashout(4hours,40˚F,50%relativehumidity)In severe conditions - under 40˚F(4˚C)and/or70%+humidity–fullrainresistancemaytakelonger.Coverexteriorwallswithplasticifrainfall is expected within 24 hours after installation.Not recommended for continuous submersion or areas exposed to foot or vehicular traffic.

WeatheringWashout NoneCracking NoneDiscoloration PassesASTMC-834

NoticeSashcowilltestanystaintodeterminecompatibilitywithJogJam.Just call and send us a sample of the stain you want tested. Test results available in a minimum of 6 weeks.


LINEAL FEETJoint Recommended Per 5 Per 29 oz.Width Joint Depth* gal. pail cartridge1/2” 1/4” 770 35.01” 1/2”** 195 8.91.5” 1/2”** 125 5.72” 1/2”** 95 4.32.5” 1/2”** 75 3.53” 1/2”** 65 3.03.5” 1/2”** 55 2.54” 1/2”** 45 2.0*RefertotheLogJamdatatec(LJC002)orproductpackagingformoredetailsaboutproperjointdesign.**Ifapplied3/8”deep,increaselinealfeetapprox.35%

Info SheetLJCDATATEC

Log Jam BlockLJCBLOCK

Chinking Color ChartLJCCLRCHRT


INFO SHEET

Log Builder® Caulk All logs move, so Log Builder was specifically designed to absorb most log movement. Most movement occurs within the first few years, when logs lose the majority of their moisture causing them to shrink and the joints to expand. That’s why it’s crucial to use Log Builder from the start. If the logs are extremely “green” (with very high moisture content) it is often best to wait several months before caulking. Log Builder is ultra-elas-tic, which means it will stretch and compress with normal movement. It won’t crack, peel or pull away. Instead, it creates a tight seal to keep water, dust, bugs and wind from seeping into your home—for many years. Log Builder is the smooth sealant for milled and hand-crafted log structures.

Fundamental Caulking Application Guidelines• Propersubstratepreparationandapplicationareimper-

ative for product longevity. Read this entire info sheet (LBR 002) before applying any product.

• Makecertainthereiscompatibilitybetweenyour stain and Log Builder. We recommend Sashco’s Capture®/Cascade® or Transformation Stains® for exterior applications and Symphony® interior clear coat for beautiful long-term protection. Best results are obtained when Log Builder is applied to clean, stained wood. Call Sashco at 800-767-5656 for guidance if in doubt.

• Checktheweatherforecast.Finishingproductsarebest-applied in moderate weather conditions, i.e., out of direct sunlight, and in dry, warm conditions..

• Checkthelogsurfacetemperature.Thesurfacetem-peratureshouldbebetween40˚F(4˚C)–90˚F(32˚C).

• Itisalwaysbesttouseabondbreaker(usuallybackerrod) before caulking. Sashco strongly recommends the use of backer rod, especially if the home is new and/or the logs are subject to significant movement. If a bond breaker is not used, expect more caulking repairs.

• ToolLogBuildertohelpensuregoodcontactwiththe log surfaces, especially to the upper log; this will great-ly aid adhesion.

• Idealsealantdepthis1/2ofthejointwidth,butno lessthan1/4”andnomorethan1/2”.

•Assembletoolsandequipment: - Backer rod - Caulking guns

- Trowels, spatulas, or foam brushes for tooling - Clean water and rags -Plasticsheetstocoverthecaulkingifwet weather moves in - Staple gun & staples• Ifyouhaveanyquestionsaboutapplication,please

call us before proceeding at 800-767-5656.

Surface Preparation Best results are obtained when Log Builder is applied to wood that has been previously coated with a compatible and thoroughly cured stain. In fact, Log Builder has a Limited Lifetime Warranty when applied overanyofSashco’sstains:CaptureLogStainorTransformation Stain. If not using a Sashco stain, be sure to confirm its compatibility with Log Builder. If the stain is older but still intact, clean the log surfaces thoroughly to remove dirt, pollen, bird droppings, and other surface contaminants. TheUSDAForestProductsLaboratoryandotherresearchers around the world have recently reported that surface wood exposed to sunlight for as little as 1-2weekscanbecomesignificantlydamagedandunsound which may lead to premature adhesive failure of coatings. Such surface wood damage has the potential to also hurt Log Builder’s (or any caulk’s) adhesion. Once bare wood has been properly cleaned and prepped to remove unsound wood, stain should beappliedassoonaspossible.Followwith Log Building caulking. A few sealers, especially those high in wax content or non-drying oils, may interfere with adhesion. Some of these coatings can hurt any caulk’s adhesion—whether applied before or after the caulk—so we advise against theiruse.CheckwithSashcoifyouhavequestionsaboutyour particular product.

10300E.107thPlace•Brighton,CO80601800-767-5656•www.sashco.com

09-134

ColorsTan, Woodtone and Dark Brown

Packaging10.5oz.plasticcartridges,29oz.fibercartridges, and 5-gallon straight-sided pails.

Application RangeSurfacetempof40˚F(4˚C)-90˚F(32˚C)

Service Range-30˚F(-34˚C)-250˚F(121˚C)

PaintabilityPaintablewithlatexcoatingsafteraminimumof24hourscuring (longer on wider joints) and after 5 days with most oil-based coatings. Contact Sashco for more specific guidance.

CompatibilityLog Builder will adhere to woods treated with most preservatives including borates**, pentachlorophe-nol, and copper compounds. Log Builder is also compati-ble with insulating glass sealants and most building mate-rials, including foam insulation and vinyl windows.** Some borate wood preservatives contain glycols or other agents that could interfere with adhesion. Sashco’s PeneTreat contains no glycols.

SpecificationsPassesASTMC-834,theperformancerequirementsofTT-S-00230BandASTMC-920,class25. MeetsFHArequirements.

VOC<1.5%byweight,max.59.8g/L

Cure-Through Time3weeks(1/2”thickness,70˚F,50%relativehumidity)

Extrusion Rate1100g/min(1/8”orificeat40psi)

Freeze-ThawPasses10cycles(0˚F-70˚F)

Hardness (Shore A)32(21-daycure)


Solid Wt.83.8%

Tack-Free TimeLessthan1hour

StainNone

Water ResistanceNo washout (4 hours, 40˚F,50%relativehumidity)In severe conditions - under 40˚F(4˚C)and/or70%+humidity–fullrainresistancemaytakelonger.Coverexterior walls with plastic if rainfall is expected within 24 hours after installation. Not recommended for continuous submersion or areas exposed to foot or vehicular traffic.

WeatheringWashout NoneCracking NoneDiscoloration PassesASTMC-834

NoticeSashco will test any stain to determine compatibility with Log Builder. Just call and send us a sample of the stain you want tested. Test results available in a minimum of 6 weeks.


Technical Data (Not to be considered specifications)


Info SheetLBRDATATEC

Log Builder BlockLBRBLOCK

Color ChartLBRCLRCHRT



POPLISTMarch 2015

Stain Color FanLiterature & POP Sales ToolsTransformation Stain® Siding & Trim

Transformation Stain® Log & Timber

Sampling Proper sampling is where it starts. It is criti-cal because the same stain can look very different on various species of wood. Different prep and application methods will also affect the final result. Therefore, sampling on your wood is the only way to make sure you get the color you want the first time. It’s easy: on a small, inconspicuous test area (we recommend a minimum 2 sq. ft. space), simply do each step the exact same way you will on all of your logs and timbers.• Prepthewood.• Applythestain.• Letthestaindry(bothbetweencoatsandafter

all coats are applied).• Ifworkingwithacontractor,don’tallowthe

contractor to stain until you have thoroughly discussed and demonstrated the look you want. Show him/her the sample.

• Don’tstainallofyourlogsandtimbersbeforeyou verify that you’re achieving the look you want. It is best if you can be on-site when stain-ing starts.

4

WARNING! This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.

WARNING!COMBUSTIBLE LIQUID & VAPOR. Contains Petroleum Distillates. Vapor harmful. Keep away from sparks, heat, flames and sources of ignition. Do not smoke while using product. For exterior use only. Not for interior use. May be harmful if inhaled. May affect the brain ornervoussystemcausingdizziness,headacheornausea.Avoidbreathingvaporsandspraymist.Adustmaskdoesnotprovideprotectionagainstvapors.If properly used, a respirator (NIOSH-approved for organic vapor with P series particulate pre-filter) may offer additional protection; obtain professional advice beforeusing.Avoidcontactwitheyes,skin,andclothing.Washthoroughlyafterhandling. DONOTTAKEINTERNALLY.Ifyouexperienceeyewatering,headachesordizziness, leave area to obtain fresh air. Close container after each use.

First AidIf you experience difficulty breathing, leave the area to obtain fresh air. If con-tinued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention.Incaseofskincontact,washthoroughlywithsoapandwater.Removecon-taminated clothing, and wash clothing right away. Call doctor if skin irritation persists.If swallowed, get medical attention immediately. Do not induce vomiting.RefertotheMSDSforthisproductasneeded.

Keep Out of Reach of Children!

NoticeReportshaveindicatedthatrepeatedandprolongedoccupationaloverexposureto solvents can lead to permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the vapors from this product may be harmful or fatal.

WARNING! Ifyouscrape,sand,orremoveoldpaint,youmayreleaseleaddust.LEADISTOXIC.EXPOSURETOLEADDUSTCANCAUSESERIOUSILLNESS,SUCHASBRAINDAMAGE,ESPECIALLYINCHILDREN.PREGNANTWOMENSHOULDALSOAVOIDEXPOSURE.WearaNIOSH-approvedrespiratortocontrolleadexposure.CleanupcarefullywithaHEPAvacuumandawetmop.Beforeyoustart,findouthowtoprotectyourselfandyourfamilybycontactingtheNationalLeadInformationHotlineat1-800-424-LEADorlogonto www.epa.gov/lead.

WARRANTYSashco warrants this product will substantially meet published specifications on the date of sale. If it fails to do so, return unused portion with original sales receipt for replacement or refund, at Sashco’s sole option. This is purchaser’s sole and exclusive remedy. This product is sold “AS IS.” To the extent permitted by law, there are no warranties which extend beyond the description on the face hereof and Sashco will not be liable for direct, indirect, special, incidental or consequen-tial damages. ThisLimitedWarrantygivesyouspecificlegalrights.Youmayhaveotherrights which vary from jurisdiction to jurisdiction. Some jurisdictions do not allow exclusion of implied warranties in consumer or other sales, limitations on the duration of implied warranties, or exclusion or limitation of incidental or consequential damages. The limitations or exclusions contained above may not apply to you depending upon your specific circumstances.

Typical Properties(Not to be considered specifications)

Colors:Natural BrownToneLightGoldToneLight BrownToneMediumGoldToneMedium BrownToneDarkGoldToneDark RedwoodRedToneLight RedToneMediumRedToneDark

Packaging: 1 gallon and 5 gallon pails

Usage: Exterioronly

Coverage rate:1stcoat:150-250sq.ft.pergallon2ndandMaintenancecoats:300-500sq.ft.pergallon(Aswithallstains,coveragewillvarydependinguponroughnessand porosity of the wood.)

VOCs:<250g/L

Application Range:40˚F(4˚C)andrisingto90˚F(32˚C)andfalling.Inseverecondi-tions(under40˚F(4˚C)and/or70%+humidity),fullrainresistancemay take longer. Protect surfaces with plastic sheeting if rainfall or snowfallisexpectedwithin24hoursafterapplication.

Compatibility:TransformationLog&TimberisrecommendedforusewithallSashco chinking and caulking products. Please contact Sashco for details on other specific compatibility questions.

Dry Time: Allowthefirstcoattothoroughlydryfor24hours(possiblylongerin cold and/or humid weather). Once thoroughly dry, follow with a lighter second coat. If desired, apply a third coat for a higher gloss. (The first coat will soak in and appear somewhat flat. The second coat should only be applied once the first coat is thoroughly dry in ordertoensureproperfilmformationandUVprotectionfromthestain, as well as give it a light gloss.)

Viscosity:50-150centipose

Density: 8.0-8.5lbs./gal.

Solids: 60-65%byweight

Odor: Solvent, mothballs

Freeze-Thaw: Passes 5 freeze-thaw cycles

The data reported here are believed to be reliable. No warranty is made or implied concerning the accuracy of or the results obtained from their use.

Watch Helpful How-To Videos • Chat Live • Search FAQswww.sashco.com

Speak with Stain ExpertsMon-Fri, 6 a.m. – 5 p.m. MST

1-800-767-5656

“A Better Way to Stain” It‘s about Transformation: old and weathered logs brought to life again, or timbers refreshed with color when they were once only gray. These are the results we want for our dream home, but sometimes those results seem like a distant fantasy. We’veseenotherlogandtimberhomesscorchedbythe sun and are afraid of the “big project” nature and the hefty price tag of maintaining our own. Contrary to common wisdom, having a great quality stain is only half the battle. The other half is what is neglected the most: routine maintenance. Over time, routine maintenance is truly the key to easier and less expensive staining. Whendoneevery3-5years,wefindthatroutinemaintenance saves a lot of time and money by eliminat-ing much of the prep work before staining. Simply do a light power wash, allow the wood to dry, and apply a maintenance coat. No sanding or stain removal necessary. Yourcontractorwillbehappyyoucalledhimsoonerrather than later, and your pocketbook will be, too. It’s that simple. UseaqualitystainlikeTransformationStain®Log&Timberandyou’lltransformthelookofyourwood.Practice routine maintenance, and you’ll discover a better way to stain. For Sashco’s complete guide on a better way to stain, keepreading.You’llfindstep-by-stepinstructionsonthefollowing key topics:

Sampling To get the look you want, sample the stain on your wood. Prep Proper prep starts you down the right path.

Application Proper application of a quality stain ensures long-term

performance.

Routine Maintenance Reducelong-termcosts,timeandeffort.

TRN0023-12

INFO SHEETwww.sashco.com • 800-767-5656

10300E.107thPlace•Brighton,CO806011-800-767-5656•www.sashco.com

Info SheetTRNDATATEC

Product Brochure & Color ChartTRNCLRCHRT

Log & Timber Stain BoardTRNBRD

Sampling Proper sampling is where it starts. It is criti-cal because the same stain can look very different on various species of wood. Different prep and application methods will also affect the final result. Therefore, sampling on your wood is the only way to make sure you get the color you want the first time. It’s easy: on a small, inconspicuous test area (we recommend a minimum 2 sq. ft. space), simply do each step the exact same way you will on all of your siding or trim.• Prepthewood.• Applythestain.• Letthestaindry(bothbetweencoatsandafter

all coats are applied).• Ifworkingwithacontractor,don’tallowthe

contractor to stain until you have thoroughly discussed and demonstrated the look you want. Show him/her the sample.

• Don’tstainallofyoursidingortrimbeforeyouverify that you’re achieving the look you want. It is best if you can be on-site during the staining process.

4

First AidRefer to the MSDS (Material Safety Data Sheet) as needed.EYES: Immediately flush with large quantities of water for at least 15 minutes. If irritation persists, see a medical doctor.SKIN: Wash with soap and water and rinse thoroughly. Wash contaminated clothing before use. INHALATION:Removetofreshair.INGESTION:Iflargequantitiesareswallowed,DONOTINDUCEVOMITING-seekmedicalhelp.

WARNING!Maybeharmfulifinhaledorswallowed.Avoidcontactwith eyes and skin. Keep out of reach of children!

If you scrape, sand, or remove old paint, you may release leaddust.LEADISTOXIC.EXPOSURETOLEADDUSTCANCAUSESERIOUSILLNESS,SUCHASBRAINDAMAGE,ESPECIALLYINCHILDREN.PREGNANTWOMENSHOULDALSOAVOIDEXPOSURE.WearaNIOSH-approvedrespiratortocontrolleadexposure.CleanupcarefullywithaHEPAvacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National LeadInformationHotlineat1-800-424-LEADorlogontowww.epa.gov/lead.

WARRANTYSashco warrants this product will substantially meet pub-lished specifications on the date of sale. If it fails to do so, return unused portion with original sales receipt for replacement or refund, at Sashco’s sole option. This is pur-chaser’s sole and exclusive remedy. Purchaser must deter-mine suitability of product for purchaser’s specific needs and assumes all risk associated with its use. This product is sold “AS IS.” To the extent permitted by law, there are no warranties which extend beyond the description on the face hereof and Sashco will not be liable for direct, indirect, special, incidental or consequential damages.

ThisLimitedWarrantygivesyouspecificlegalrights.You may have other rights which vary from jurisdiction to jurisdiction. For a detailed description of the warranty and exclusions, please visit our website at www.sashco.com

Typical Properties(Not to be considered specifications)

Colors:NaturalCedarGold Tone MediumRed Tone MediumBrown Tone MediumRedwood

Packaging: 1 gallon and 5 gallon pails

Usage: Exterior/Interior

Coverage rate:1stcoat:150-250sq.ft.pergallon2ndandMaintenancecoats:250-350sq.ft.pergallon(Aswithallstains,coveragewillvarydependinguponroughnessand porosity of the wood.)

VOCs:<250g/L

Application Range:40˚F(4˚C)andrisingto90˚F(32˚C)andfalling.Inseverecondi-tions(under40˚F(4˚C)and/or70%+humidity),fullrainresistancemaytakelonger.Coversurfaceswithplasticifrainfallorsnowfallisexpectedwithin24hoursafterapplication.

Compatibility:Transformation Siding & Trim is recommended for use with all Sashco caulking & chinking products. Please contact Sashco for details on other specific compatibility questions.

Dry Time: Driestothetouchin30minutesorlessinidealweather.

Viscosity:50-150centipoise

pH:8.5-9.0

Density: 8.3-8.8lbs./gal.

Solids: 18-22%byweight

Odor: Mild, sweet

Freeze-Thaw: Passes 5 freeze-thaw cycles

The data reported here are believed to be reliable. No warranty is made or implied concerning the accuracy of or the results obtained from their use.Watch Helpful How-To Videos • Chat Live • Search FAQs

www.sashco.comSpeak with Stain ExpertsMon-Fri, 6 a.m. – 5 p.m. MST

1-800-767-5656

“A Better Way to Stain” It’s about Transformation: old and weathered wood siding brought to life again, or trim stained with color to create the perfect accent. These are the results stain was made for, yet rarely do we observe this in the real world. We see our neighbor’s stain peeling or are reluctant to repair our own siding due to its “big project” nature and the hefty price tag. Contrarytocommonwisdom,havingagreatqualitystainis only half the battle. The other half is what is neglected themost:routinemaintenance.Overtime,routinemain-tenance is truly the key to easy and inexpensive staining. Whenappliedcorrectlyandmaintainedevery3-4years, you can be assured that Transformation Stain® Siding & Trim won’t peel. This eliminates the time and expense of sanding the surface before applying a main-tenance coat. Simply do a light power wash, allow the wood to dry and apply another coat. It’s that easy, and you’llfindthatyour“bigproject”wasn’tsobigafterall. UseaqualitystainlikeTransformationSiding&Trim and you’ll transform the look of your wood. Prac-tice routine maintenance and you’ll discover a better way to stain. For Sashco’s complete guide on “a better way to stain,”keepreading.You’llfindstep-by-stepinstructionson the following key topics:

Sampling To get the look you want, sample the stain on your wood. Prep Proper prep starts you down the right path.

Application Proper application of a quality stain ensures long-term

performance.

Routine Maintenance Reduce long-term costs, time and effort.

TRW0025-12


*When applied correctly & maintained (3-4 years on siding & trim).

10300E.107thPlace•Brighton,CO806011-800-767-5656•www.sashco.com

Info SheetTRWDATATEC

Siding Fan POPTRWFAN

Product Brochure & Color ChartTRWCLRCHRT

Siding & Trim Stain BoardTRWBRD

Shelf Talker(TRWSHF)


POPLISTMarch 2015

Stain Color FanLiterature & POP Sales ToolsCapture® Log Stain

Info SheetCAPDATATEC

Product Brochure & Color ChartCAPCLRCHRT

Capture Stain BoardCAPSBD

®

log stainCapture

• New picture makes it easy to identify as a log stain

• New paint pail

• Capture® and Cascade® labels are similarly designed for easy association

• New bullet points highlight Capture’s excellent

elasticity and proven durability


New

Label Design!

Also available in 5 gallon buckets.

CAPCASPKG 2-15

• Now front & center: Sashco, Products that Work®

• Step1iconidentifies Capture® as the base coat in a 2-part stain system

• Brought back the trees that so many of our customers were familiar with

• Capture® log stain: large and easy to read

Beautiful new packaging!Same great formula!

New Packaging SheetCAPPKG

Stain Disc Sales SheetSTAINDISCASHT

Capture the Moment StoriesCAPTURESTORY

Capture Exposure Panel BrochureCAPCOMSTAIN

Cured Stain DiscsLog homes move. Can your stain move with it?

Typical Siding Stain -Cracks and fails

Capture® Log Stain -Protects your logs for years to come

Relaxed State Relaxed State

Attempting to Stretch Attempting to Stretch

®

log stainCapture

800-767-5656 • www.sashco.comFollow SashcoInc on:

STAINDISCSHT 4-15

Photo: ©2011 Brett Christenson/Photographer

Capture® Log Stainvs

The Competition

Stain Panel Exposure Racks Denver, Colorado

Competitive Stain Report


Sashco®

Capture®/Cascade®Perma-Chink® LifeLine™ Ultra-7

Lifeline™ Advance

Covered

Exposed

Sashco®

Capture®/Cascade®Sikkens®

Cetol® 1 + Cetol® 23 Plus

Covered

Exposed

Testing Highlights• Left side of panel: Sashco’s Capture® and

Cascade®

• Right side of panel: a competitive stain

• Top portion is covered, the bottom portion is exposed to the elements

• Panelsarefacedduesouthata45˚angleformaximum UV exposure

• Panels are exposed for 18 months

• Mile high elevation means 25-30% more UV radiation

For more details on how the testing was done, flip to the back of this report.

Capture Selling Center65502


POPLISTMay 2015

Info SheetCASDATATEC

Symphony Clear Interior Log CoatingWhen natural beauty is your passion, Symphony is

“music to your eyes.” It’s the colorless coating that not only protects, it livens the interior of your home by allowing light to dance off the logs. When applied to bare wood, Symphony enhances the natural grain, color and beauty. But it can also be used over many stains to display an orchestra of visual impact—adding depth and richness to the color. With Symphony, cozy warmth and natural elegance can be yours.

Designed Specifically For Your Log Home• Leaves a slick surface that makes cleaning a breeze—

just use a damp rag to remove dust, dirt and stains.• An environmentally friendly, low toxicity, non-flamma-

ble formula that doesn’t have the offensive odor associ-ated with many other clear coatings.

• Convenient 5-gallon pail packaging that lends itself to spray application, which can save you time and labor.

• Unlike many other water-based coatings, Symphony remains stable through several freeze-thaw cycles.

• Symphony is versatile and can also be used on interior woodwork, cabinets, paneling and wood trim. It is not recommended for floors or exteriors.

Fundamental Application Guidelines 1. Proper substrate preparation and application are imper-

ative for product longevity. Read this entire Info Sheet, SYM 002, before applying any product.

2. You should always test any coatings on your specific logs before applying to an entire wall.

3. Apply only to interior walls where the roof is in place, the product is at room temperature, there are no cold drafts and the wood surfaces are between 50˚F (10˚C) to 90˚F (32C).

4. Tannin staining should be dealt with before applying any interior clear coatings to bare logs. Refer to the section titled “Tannin Staining” for further information on this important topic. If you’ve applied a pigmented coat of stain, tannin staining is usually not an issue.

5. The moisture content of interior wood should be low enough to resist microbial growth before applying any coatings, at least 19% or less. Use a moisture meter to make sure this is a fact. If the wood’s moisture content is higher, wait until it lowers to 15% or less, or add a biocide (such as Stay Clean I/E) to your coating before application.

TANNIN STAININGUgly brown or yellow discolorations in wood are

most often due to tannin staining. Tannins are a natural component in all wood and help give it its natural color. Although tannin staining can occur on exterior wood, it is more noticeable and objectionable when it occurs on the interior of a home.

Tannin staining occurs different ways:• At the surface of logs high in moisture content, when

tannins are moved to the surface by escaping water;• When water drips on or flows over a wood surface

over a period of time. These areas will have a central region of very light, almost white wood, surrounded by an irregular, much darker wood where the tannins have been concentrated.

Usually, tannin discoloration in the surface of the wood is only 1/32” or so deep and can be lightly sanded away. If sanding does not work, chemical cleaners may need to be used. Contact Sashco for detailed information, as these cleaners need to be carefully applied.

Applying SymphonyNEW WOOD

If you’ve decided to keep your logs natural looking and only want to apply Symphony to bare wood, best results are obtained if you sand the wood to a smooth finish with fine sandpaper. Be certain to remove all dust before finishing. Do not use steel wool; it may cause rust stains. For a smoother finish, sand between coats..

FINISHED WOODCompatibility is a huge issue, so logs that already

have some type of stain or sealer on them will need to be tested for compatibility; call us and we will talk you through the testing procedure. For best adhesion to non-Sashco coatings, it is usually best to lightly sand the surface before applying Symphony. Contact Sashco for information on compatibility testing. For best adhesion to non-Sashco coatings, it is best to lightly sand the surface before applying Symphony. Old finishes may need to be mechanically removed if a lighter appearance is desired.


Info SheetSYMDATATEC

DATA TEC

Why You Need A Wood PreservativeYou’ve just spent a long time leafing through

planning books, selecting the logs, choosing the per-fect lot—waiting for your dream home to be built.Why put all that at risk? Rot, weather, insects, fungi allpose a serious threat to your logs. Protect your invest-ment—treat your logs first to make them last.

All wood faces the possibility of rot and insectinfestation—even in dry climates. Fungi and insectsactually consume the cells of dead wood, often causingsevere structural damage, damage that often requireslog replacement—a costly repair.

PeneTreat helps protect your home from the costly damage caused by rot and insect infestation.

What is PeneTreat?PeneTreat is a borate-based wood preservative.

Borates are well-known across the world for their pro-tective qualities. And like other borates, PeneTreat ishighly effective in the prevention of most rot andwood-boring insects.

When using PeneTreat, a protective “shell” coat-ing helps defend your home against dry, wet, andbrown rot as well as termites, house borers, powder-post beetles and carpenter ants (to name a few).

The PeneTreat DifferencePeneTreat is registered with the Environmental

Protection Agency (EPA) for spray and brush applica-tion, which makes it perfect for remedial treatment. Italso means that you can apply it (you don’t have to bea licensed applicator). But, you must follow all appli-cation and use guidelines.

Do not mix PeneTreat into stains. For borates tobe effective and to provide long-term protection, theymust soak into the wood itself, not remain in the coat-ing. Although some stains contain borates, the low per-centage of borate in the stain--generally 2-3% provideslittle to no appreciable benefit. Therefore, follow thePeneTreat mixing and application guidelines toachieve recommended BAE (borate acid equivalent)levels that truly provide long-term, effective protec-tion.

PeneTreat can be applied by brushing, spraying,dipping, kerf-flooding or hole flooding. It comes inpowder form and just needs to be mixed with water forapplication. PeneTreat is packaged in two convenientsizes: 6-gallon pails that are easy to carry and double

as a handy source for mixing the solution and the 3-1/2gallon size—perfect for smaller jobs.

The active ingredient in PeneTreat (disodiumoctaborate tetrahydrate - a refined form of the naturalmineral borax) is less toxic to people and animals than many other chemicals used for wood preserva-tion. However, since no pesticide is completely safe,PeneTreat must be handled and used as directed.Borates do not affect the natural color or strength of wood; they are completely odorless; they’re not corrosive to metal fasteners, nails or screws. And when a “PeneTreat home” is properly sealed againstmoisture, the borates can provide many years of effective protection.

More Protection for Your Money

The best part about PeneTreat is the money itsaves you. Not only is PeneTreat affordable, it savesyou the headaches, time and costs associated withpotential log replacement and damage control.

According to the most comprehensive studyavailable, the depth of penetration of PeneTreat is asdeep or deeper than other borate products that useslow-drying and toxic solvents (like ethylene glycol)in their formulations. Contact Sashco at 1-800-767-5656 if you'd like a copy of this study.


04-094 1


EPA Registration Number: 64820-1

EPA Establishment Number: 064820-CO-01

Active Ingredient: Disodium Octaborate Tetrahydrate-98%(Inert ingredients-2%)

Coverage Rate: 6-gallon size: 27 gallons of a 10% solution will cover4050 sq. ft. of log surface.

3 1/2-gallon size: 15 gallons will cover 2250 sq. ft. oflog surface.

Packaging: 6-gallon pail (25 lbs. net; yields 27+ gallons of a 10%solution)

3 1/2-gallon pail (14 lbs net; yields 15+ gallons of a10% solution)

Application Range: 40˚F (4˚C) - 90˚F (32˚C)

Compatibility: PeneTreat will not interfere with theadhesion of most wood stains and coatings. (The sur-face should be completely dry before applying anycoating.)

Effective Against: Rot, fungal decay and most wood-boring insects. Does not control carpenter bees (con-tact Sashco for guidance).

Blue Stain: PeneTreat does not control the organismsthat cause blue stain—the gray to black markingoften present in dry wood.

If blue stain is a problem, an additional fungicidemay be needed. Contact Sashco for recommendationson blue stain fungicides.

PeneTreat helps prevent damage before it starts.

Info SheetPENDATATEC

DATA TEC

The Basics of Applying CPRPreparation*1. Read this entire Data Tec, CPR 002, before applying

any product. 2. Decide if you need to use the cleaner or

brightener strength.3. Wear protective eyewear, such as safety glasses with

side shields or goggles, when applying this product.Neoprene gloves and long-sleeved clothing are recom-mended to help protect skin. Hydrogen peroxide isreleased when CPR is dissolved in water, so use withgood ventilation.

4. Brush any dirt, loose material or other contaminantsfrom wood surfaces to ensure that CPR makes goodcontact with the surface you wish to clean or brighten. Keep the solution off surfaces you do not want bleached.

5. Use in warm weather, between 60˚ and 90˚F, for best results.

*NOTE: CPR is not recommended for use on Redwood,Douglas Fir or other high tannin woods. CPR mayoccasionally darken these woods - please test first.

Cleaner Strength(for less severe discoloration and surface cleaning)

Mix 1/2 of the container with 4 gallons of clean waterin a clean 5-gallon plastic pail.

Brightener Strength(for aggressive cleaning)

Mix the entire container with 4 gallons of clean waterin a clean 5-gallon plastic pail.

MixingStir thoroughly until the powder is mostly dissolved

(which will take a few minutes, depending on water

temperature). The solution will begin to “fizz” as thepowder dissolves. Not all of the powder will completelydissolve in the solution; even if all of the powder is notcompletely dissolved, the solution is very usable. For thebest and most consistent results, the solution should beused within 4 hours.

CoverageAt either strength, solution coverage is between 100

and 150 square feet per gallon (500-750 square feet per 5gallons), depending on the wood porosity.

ApplicationApply CPR to one wall at a time, starting at the bottom

and working completely across, 2-5 logs high. When thebottom 2-5 logs are completely cleaned and/or bright-ened, then move up the wall to the next 2-5 logs.Continue in a similar pattern to the top of the wall. Workonly on one small area at a time (15-25 sq. ft.) for bestresults. Rinse with clean water as you go. Apply via gar-den sprayer, brush or mop. Allow the solution to work for5-20 minutes, keeping the surfaces wet with additionalCPR solution. For best results, vigorously scrub the sur-faces with a stiff-bristle brush to remove unsound surfacewood. After you’ve cleaned the entire wall with the CPRsolution, starting at the top, rinse the entire wall thor-oughly and allow to dry before application of preserva-tives or stains. Repeat applications of CPR solution maybe necessary for tougher discolorations, more severe UVdamage and/or heavily weathered wood surfaces.

CleaningClean brushes and equipment with soap and water.

WarningAvoid contact with eyes and skin and do not ingest.

Keep away from children and animals. Harmful if swal-lowed. CPR Log Cleaner & Brightener will not harmgrass or most plants — it decomposes into water, oxygenand soda ash. Rinse grass and plants thoroughly withclean water after exposure. Solutions of CPR can be slip-pery until washed away! Take precautions to avoid slip-ping on ladders, scaffolding, decks, sidewalks, etc.

Storage and DisposalStore unmixed powder in a cool, dry place in tightly

sealed containers. Caution: Store mixed solution in loosely sealed con-

tainers as pressure can build up if tightly sealed. Disposeof residual material or empty containers in accordancewith Federal, State and local regulations. Do not contami-nate water, food or feed by storage or disposal.

First AidEYES: Immediately flush eyes with flowing, clean waterfor at least 15 minutes, holding eyelids apart to irrigatethoroughly. Get immediate medical attention.

SKIN: Remove affected clothing and wash skin withsoap and water. Wash clothing before reuse.

INHALATION: Move to fresh air. If not breathing, giveartificial respiration. If breathing is difficult, give oxygen.Get immediate medical attention.

INGESTION: Give 2 glasses of water. Call physicianand follow recommendations given. Never give anythingby mouth to an unconscious person.

WarrantySashco warrants this product will substantially meet

published specifications on the date of sale. If it fails todo so, return unused portion with original sales receipt forreplacement or refund, at Sashco’s sole option. These arepurchaser’s sole and exclusive remedies for any breach ofwarranty. Purchaser must determine suitability of productfor purchaser’s specific needs and assumes all risk associ-ated with its use.

Except as stated above there are no warranties for thisproduct. The foregoing express warranty is in lieu ofall other warranties, express or implied, includingwithout limitation implied warranties of mer-chantability or fitness for a particular purpose, whichwarranties are specifically excluded and disclaimed.

This Limited Warranty gives you specific legal rights.You may have other rights which vary from state to state.Some states do not allow exclusion of implied warrantiesin consumer or other sales, limitations on the duration ofimplied warranties, or exclusion or limitation of inciden-tal or consequential damages. Thus, the limitations orexclusions contained above may not apply to you depend-ing upon your specific circumstances.

Important NotesSunlight, according to the USDA Forest Products

Labs, can create unsound surface wood in as little as 1-2weeks. So, it is important to coat and seal the wood short-ly after good prep work is done.

Media blasting is the best overall method of preparinglog surfaces. Refer to Keeping the Dream Alive:Sashco’s Complete Staining Guide for detailed informa-tion on finishing a log home. Call us to get your copy.

NoticeBecause of many varying conditions affecting use and

application, the manufacturer advises buyer that theseconditions may impair or vary the results and effects ofthe use of this product. Therefore, application and per-formance of this product cannot be guaranteed. Neitherthe manufacturer nor the seller shall be liable in respect toany injury or damage suffered by reason of use of thisproduct for a purpose not indicated on the label or whenused contrary to the directions or instructions herein.There are no warranties which extend beyond the descrip-tion on the base hereof, including any implied warranty ofmerchantability.

KEEP OUT OF REACH OF CHILDREN


07-092 1


Appearance: White granular powder

Packaging:64 oz. plastic container (net wt. 4.8 lb.)

Application Range: 60˚-90˚F (don’t apply to hot, sun-drenched surfaces.)

Working Time:1) 5-20 minutes after application to wood. 2) 4-6 hours after mixing with water.

Freeze-Thaw Stability:Stable, but store between 40˚F – 80˚F.

Solids Wt. %: 100%

Maximum VOC: 0 (zero)

Before CPR After CPR

Info SheetCPRDATATEC

Cascade® Clear Coat

® ®

INFO SHEET

INFO SHEET

Cascade®

clear coat

• New picture shows a key benefitofsheddingwater

• New paint pail

• NewbulletpointshighlightCascade’seasyapplication,greatprotectionagainstUVandwaterdamageandaddedalgacide


New

Label Design!

Also available in 5 gallon buckets.

CASPKG 2-15

• Nowfront&center:Sashco,Products that Work®

• Step2iconidentifies Cascade® as the top coat ina2-partstainsystem

•Cascade®clearcoat: largeandeasytoread

• Capture®andCascade® labelsaresimilarly designedforeasy association

Beautiful new packaging!

Maintenance made easy

Same great formula!

New Packaging SheetCAPPKG


Stain Color FanLiterature & POP Sales Tools

POPLISTMay 2015

Product Demo Blocks (5 total)

Aisle Directory

Colored Bin Liners (10 total)

Channel Strips (11 total)

Tube Shelf Talkers(6 total)

Channel Stickers(11 total)

Get ’d!FLRP will . . .Improve the Customer Experience Easy to Find

Inspire Customer Confidence Products That Work

Deliver Higher $ Margins Premium Brands

Fully Loaded Retail Partner

FLRP

Contact us for more details.

Fully Loaded Retail Partner

Items available as a KIT onlyKIT PART NUMBER - 12600

800-767-5656 • www.sashco.comKeep up with SashcoInc.

Stain Color FanLiterature & POP Sales Tools

POPLISTMay 2015

Presentation FoldersPREKITFOLDER

Sashco CapsCAPSASHCO

14” x 30” White Matte Board SignageSIGNWH

14” x 30” Blue Matte Board SignageSIGNBL

2015 Home Improvement Product CatalogDelivering high performance products since 1936

Home Improvement Product CatalogHIAPB

Bec

ause

you

can’

t aff

ord

to d

o it

twic

e.

Bec

ause

you

can’

t aff

ord

to d

o it

twic

e.

Bec

ause

you

can’

t aff

ord

to d

o it

twic

e.

Aisle Directory Flyerwith Conceal

Aisle Directory Flyerwith MildewFree

Aisle Directory Flyerwith Conceal & MildewFree

800-767-5656 • www.sashco.comKeep up with SashcoInc.

MPOPLIST 5-15

master poplist - sashco

Documents