mars led street light - kenjitsu usa · 2019-12-05 · mars led street light features leading light...
TRANSCRIPT
MARS LEDSTREET LIGHT
[ “F” & “Q” Outdoor Series ]
F1 F2 F3 Q1 Q2 Q3
www.kenjitsuusa.comPowered By:
The advanced nature of a LED lamp is determined by its cooling efficiency. Good heat dissipation structure will reduce the temperature of the LED chips and improve the conversion efficiency of light, reduce light decay rate and extend the chip’s service life.
Our patented Hexagonal honeycomb structure greatly diffuse the heat out of the center of LED chip.
Adopts up-down through-hole structure which is conductive to the flow of hot and cold air providing superior cooling effect.
The Lens for light distribution is with intellectual Property Rights. The transmittance is over 95%, it can increase the light efficiency of the whole lamp. This professional design could satisfy various require-ments of global customer. Our TYPE 2,3,4 North American Standard street light lens, zero degree lens, and Specialized Lenses could optimize the lighting effect in variety of road conditions.
High Low Bay
Flood
Tunnel
Spotlight
MARS LED STREET LIGHT
Features
Leading Light Distribution TechnologyVariety of Patented design LENS.
www.kenjitsuusa.com
-
180W (120lm/w) lamp
Lens for High-Low BayFlood /Tunnel/ Spotlight
Lens for Street Light
45º Lens78x43.5 mm, angle of 45º lens is ideal for lamps hang-ing on the high ceiling in factory, workshop and retail outlets. It is applicable for high-low bay flood, tunnel and spotlight. When used with out T series lamp, it can light a 6M-diameter circular region for 7M height, a 9M-diameter circular region for 10M height.
60º Lens78x40 mm, angle of 60º lens is ideal for lamps hanging on the high ceiling in factory, workshop and retail outlets. It is applicable for high-low bay flood, tunnel and spotlight. When used with out T series lamp, it can light a 9M-diameter circular region for 7M height, a 13M-diameter circular region for 10M height.
Type 1 LensT1 is designed for town and village road lighting. The lens size is 92x29mm. The angle of light diffusion is 150°x60°x12°. When the pole height is 6M and lamp space is 40M, UI can reach 0.33, U0 can reach 0.36.
Type 2 LensT2 is in compliance with North American Standard Type II, designed for city road lighting. The lens size is 92x29mm. The angle of light diffusion is 150°x86°x15°. On a 8-lane two ways road, when the pole height is 10M and lamp space is 35M, UI can reach 0.82, U0 can reach 0.61. So it is applicable to 6 or 8-lane two ways road.
90º Lens77.6x35.4 mm, angle of 90º lens is ideal for lamps hang-ing on the high ceiling in factory, workshop and retail outlets. It is applicable for high-low bay flood, tunnel and spotlight. When used with out T series lamp, it can light a 12.6M-diameter circular region for 7M height, a 18M-diameter circular region for 10M height.
120º Lens78x35 mm, angle of 120º lens is ideal for lamps hanging on the high ceiling in factory, workshop and retail outlets. It is applicable for high-low bay flood, tunnel and spotlight. When used with out T series lamp, it can light a 27.5M-diameter circular region for 7M height, a 39M-diameter circular region for 10M height.
180W (120lm/w) lamp
Kenjitsu USA CORP. T. (619) 7345862 [email protected] www.kenjitsuusa.com
180W (120lm/w) lamp
180W (120lm/w) lamp
180W (120lm/w) lamp
Type 3 LensT3 is in compliance with North American Standard Type III, designed for city road lighting. The lens size is 92x29mm. The angle of light diffusion is 150°x100°x15°. On a 10-lane two ways road, when the pole height is 10M and lamp space is 30M, UI can reach 0.87, U0 can reach 0.54. So it is applicable to 8 or 10-lane two ways road.
Type 4 LensT4 is in compliance with North American Standard Type VI, designed for city road lighting. The lens size is 92x35.9mm. The angle of light diffusion is 138°x80°. On a 10-lane two ways road, when the pole height is 12M and lamp space is 40M, UI can reach 0.6, U0 can reach 0.53. So it is applicable to 8 or 10-lane two ways road.
Type 0 LensT0 (with big polarization) is designed for city road lighting, applica-ble to 0° elevation arm.The lens size is 92x30.5mm. The angle of light diffusion is 158°x76°x30°. On a 6-lane two ways road, when the pole height is 10M and lamp space is 35M, UI can reach 0.82, U0 can reach 0.73.
PowerInput VoltageLight SourceEfficacyFlux(LM)Power Factor
AC: 90 – 305V with Meanwell Driver ; DC:28 – 36V
Bridgelux® or CREE®
130 LM/W
30W 40W 50W 60W 60W 80W 100W 120W 120W 150W 180W
0.9
-40° - +70°C
570x280x80mm 720x330x88mm484x260x80mm2.5 Kg 4.0 Kg 6.3 Kg
4 – 7Meter 8 – 10 Meter 9 – 12 Meter
UL1598,UL8750 / CSA22.2 NO250.0,NO250.13 /CE / NOM
Standard 5 Years, Extended 10 Years(optional)
>= 50,000 Hrs.
3000 – 6000K
>= 70
IP65 (Water-proof)
ADC 12 die-casting Aluminum
High borosilicate 3.3
92mm
Standard: 120°x90°, or Selection of T1/T2/T3/T4/T0/TS shown on previous page
CRI(Ra)Color TempIP RatingHousingLENSLENS DiaLens TypeLife SpanOP Temp
DimensionWeightCertificates
Install HeightWarranty
3900 5200 6500 7800 7800 10400 13000 15600 15600 19500 23400
Model F1/Q1 F2/Q2 F3/Q3
F series Q series