Manufacturer

Product Description

COYOTE LANDSCAPEPRODUCTS COMPANYA Division of Acme Manufacturing Company, Inc.

4661 Monaco StreetDenver, CO 80220

Toll free ph: 1-800-321-1115Toll free fax: 1-800-322-7002

Local ph: 303-355-3344Local fax: 303-355-1499

www.coyotelsp.com

COYOTE LANDSCAPE PRODUCTSoffers steel landscape edging for resi-dential and commercial application. Steel edging is available in powder coated, plated and raw finishes. Steel edging is recommended for use in areas requiring permanent and distinct separation of differ-ent materials.

Basic Uses

Use steel landscape edging as a border between planting beds, walkways, and driveways. Steel landscape edging is ideal for separating different materials from one another, like grass from mulch, rock fill from grass, paver bricks from walkway, etc.

Advantages

COYOTE LANDSCAPE PRODUCTS steel edging is manufactured for superior dura-bility on state-of-the-art roll forming equip-ment. In-house manufacturing capabilities allow for extensive inventory in-stock. Lead times for most products are only two to three days.

Availability

Ease of InstallationSteel landscape edging installs quickly and easily. Dual punch out pockets for inter-locking stakes allow stakes to be driven down in a straight line. A variety of acces-sories help insure flawless installations onto a wide array of terrain.

Environmentally Friendly

Of all the different things which can be recycled, steel is North America’s most recycled material. According to the Steel Recycling Institute (SRI), as of November 15, 2012 the recycling rate of steel is at an all time high of 92%. All North American steel contains recycled steel.

EcoCoat™ powder coating takes it a step further.

Pre-treatingA specialized process called plaforization provides a simple, disposal-free solution for pre-treating metal to remove surface oils and other contaminates that would mar the powder coating. The plaforization process is conducted with low vapor pres-sure, emitting virtually no VOCs. There is no water rinse involved, so no wastewater is produced. No sludge is created; nothing is added to a landfill. The process contains no halogenated compounds, ozone-deplet-ing compounds, carcinogens, mutagens, or hazardous air pollutants.

Powder CoatingPowder coatings emit virtually no VOCs. Powder coating overspray can be recycled and thus it is possible to achieve nearly 100% use of the coating. Powder coatings can produce much thicker coatings than conventional liquid coatings without run-ning or sagging, and increases products durability.

Infrared CuringOnly the surface of the part and the powder must be heated rather than the whole part. The IR oven has no blowers or fans and uses much less energy, reducing emissions.

Dry OffA dry-off oven is used that recuperates heat exhausted from the IR Cure Ovens. Curing and drying occur in a nearly closed-loop.

ToughEdgeEcoCoat™ powder coated carbon steel landscape edging is primarily used in heavy duty and commercial applications.Height: 4”Length: 10’ and 16’Thickness: 1/8” & 3/16”Top: straightColors: green, brown & blackTerraEdgePlated finished carbon steel landscape edging is primarily used in residential applications.Height: 4” & 6”Length: 10’Thickness: 14, 16, 18 & 20 GATop: straight & rolled

RawEdgeRaw, non-finished carbon steel landscape edging is primarily used in residential and light commercial applications where a natural or rustic look is desired.Height: 4” & 6” Length: 10’ & 16’Thickness: 12, 14, 16, 18 & 20 GA; 1/8” & 3/16”Top: straight & rolled

PerfEdgePlated perforated carbon steel landscape edging is primarily used in residential and light commercial applications where drain-age is needed.Height: 4” Length: 10’Thickness: 16 & 20 GATop: rolled

ExpandEdgePlated carbon steel landscape edging is primarily used in residential and light commercial applications where drainage is needed.Height: 4” Length: 4’Thickness: 16 GATop: folded

Durability

Steel landscape edging is the most dura-ble edging available. It will not rot or be-come brittle in cold weather. It resists frost heave, ground movement, and withstands routine landscape maintenance with its uniform thickness and height.

EcoEdgeEcoCoat™ powder coated carbon steel landscape edging is primarily used in resi-dential and light commercial applications.Height: 4”Length: 10’Thickness: 12 & 14 GaugeTop: rolled and straightColors: green, brown & black

Sizes & Applications

SPECIFICATIONS and TECHNICAL DATApage 1

Plated Finish

EcoCoat™ Finish

Corrosive resistant finish, applied by the hot dipped process (0.30 ounce per square foot minimum thickness). Typically, complying with ASTM A653. Zinc coverage will be to a thickness no less than 2.6 mil.

Available Finishes Accessories

Step 1- Pretreatment

Single-stage organic, ambient temperature, phosphating system. Effluent free, low VOC (> 1467/lb).

Step 2 - Polyester Powder Finish

Cured Film Properties(properties are typical):

PCI Powder Smoothness Rating .................. 8-9 (high gloss)

Specific Gravity (ASTM D792) ...............1.2 -1.8Adhesion (ASTM D3359) .................. 5B (100%)Gloss (ASTM D523) .................................30-99Pencil Hardness (ASTM D3363) ................H-4HImpact (ASTM D2794) .................160+ inch lbs.Flexibility (ASTM D522) ........................ 1/8 inch - no fracturing

Humidity (ASTM D2247) ...............1,000+ hoursSalt Spray (ASTM B117) ..............1,000+ hours

Step 3 - Curing

Infrared Cure with exhaust heat reclamation, utilizing waste heat to assist in drying and reduce energy usage.

Interlocking Stakes - Used to join two pieces of edging via insertion into stake pockets. Available in 12” & 16” heights and in green, brown & black Eco Coat

powder coat finish.Hairpin Stakes - Used to connect two sections of edging or the two ends of a section forming a circular pattern.

Speed Clips - Universally fits rolled or straight edging of any gauge. Perfect for rocky soil.

Installation

Edging to be installed as indicated on Con-tract Illustrations, according to the Coyote Landscape Products Company recom-mendations. Edging to be anchored with steel stakes spaced approximately 2.5’ on center, driven flush with rolled edge of product. Stakes are required to be driven in solid soil, with no less than 85% relative compaction.

Alignment (Horizontal): Install edging as indicated by alignments without kinks, bends, or waves. Curved sections shall be installed as indicated without kinks, bends, or waves. The Land-scape Architect will have the opportunity to review the layouts.

Alignment (Vertical): Edging is to be installed parallel with the finished grade, with top of edging to be no more than 1/2” above it.

Stakes:Interlocking stakes should be placed through pockets and driven into ground so that top of stake is just flush with rolled or straight edge.

Architect Specifications:

Contractor Specifications:

All steel landscape edging shall be ________ thick x ________ long with ________ stakes per section, having a ________ finish.

Job NameContractorAll steel landscape edging shall be ________ thick x ________ long with ________ stakes per section, having a ________ finish.

COYOTE LANDSCAPEPRODUCTS COMPANY

A Division of Acme Manufacturing Company, Inc.

4661 Monaco StreetDenver, CO 80220

Toll free ph: 1-800-321-1115Toll free fax: 1-800-322-7002

Local ph: 303-355-3344Local fax: 303-355-1499

www.coyotelsp.com

Installation -cont’dBack Filling:Back fill on both sides of edging, leaving no more than two sections unsupported at one time.

Damage: Should edging become damaged, replace sections as necessary.

Top of edging to be no more than1/2” above finish grade

Top of interlocking stakesto be flush with rolled

or straight edge

RolledTop

Edge

SPECIFICATIONS and TECHNICAL DATApage 2