≥ Please read these instructions carefully before using this product and save this manual for future use.

≥ Prière de lire ces instructions attentivement avant d’utiliser Ie produit et garder ce manuel pour l’utilisation ultérieure.

≥ Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.

Removable Full Front CD Player/Receiver

Lecteur CD/Récepteur avec panneau avantentièrement amovible

Reproductor de CD/Receptor con carátulacompleta desmontable

CQ-DPX151/DP101U

(CQ-DPX151U)

<VOL

SEL

BAND

TUNE

MUTE M/L1 2 3 4 5 67 12

SOURCE

REPCQ-DPX151U CD RECEIVER 45WX4

LOUD

RANDOM

PWR

8 119 10

TRACK

DISP

MONO/LOC

REMOTE

SCAN/APM

Operating InstructionsManuel d’instructions

Manual de instrucciones

CQ-DPX151/DP101U3

CQ-DPX151/DP101U2

Find the model number and serial number on eitherthe back or bottom of the unit. Please record themin the space below and retain this booklet as a per-manent record of your purchase to help with identi-fication in case of theft.

MODEL NUMBER CQ-DPX151/DP101U

SERIAL NUMBER

DATE PURCHASED

FROM

Radio Frequency Interference Statement (Part 15 of the FCC Rules):Applies only in U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital, pursuant toPart 15 of the FCC Rules.≥ These limits are designed to provide reasonable protection against harmful interference in an automo-

bile installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installa-tion. If this equipment does cause harmful interference to radio reception, which can be determined byturning the equipment off and on, the user is encouraged to consult the dealer or an experience radiotechnician for help.

FCC Warning:Any unauthorized changes or modifications to this equipment would void the user’s authority to operatethis device.

This device complies with Part 15 of the FCC Rules:Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired

operation.

§For Canada:This Class B digital apparatus complies with Canadian ICES-003.

Safety Information

Il est recommandé de noter, dans l’espace prévu ci-dessous, les numéros de modèle et de série inscrits soità l’arrière soit sous le fond de l’appareil, et de conserverce manuel comme mémorandum de l’achat afin de per-mettre l’identification de l’appareil en cas de vol.

NUMÉRO DE MODÈLE CQ-DPX151/DP101U

NUMÉRO DE SÉRIE

DATE DE L’ACHAT

VENDEUR

Consignes de sécurité Información para su seguridad

Busque el número del modelo y el número de serie yasea en la parte trasera o en el fondo de la unidad. Sírvaseanotar dichos números en el espacio siguiente, y man-tenga este librete como una anotación permanente de sucompra para ayudar en la identificación en el caso derobo.

NÚMERO DEL MODELO CQ-DPX151/DP101U

NÚMERO DE SERIE

FACHA DE COMPRA

NOMBRE DE LA TIENDA

ENGLISH

FRANÇAIS

ESPAÑOL

CAUTION:THIS PRODUCT IS A CLASS I LASER PROD-UCT.USE OF CONTROLS OR ADJUSTMENTS ORPERFORMANCE OF PROCEDURES OTHERTHAN THOSE SPECIFIED HEREIN MAY RESULTIN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIRYOURSELF. REFER SERVICING TO QUALIFIEDPERSONNEL.

WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS PRODUCT TORAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, AND ANNOYING INTERFERENCE, USEONLY THE INCLUDED COMPONENTS.

Laser products:Wave length: 780 nmLaser power: No hazardous radiation is emitted

with safety protection.

ATTENTION :CET APPAREIL EST UN PRODUIT LASER DE LA CLASSEI. L’UTILISATION DE COMMANDES OU RÉGLAGES OUL’EXÉCUTION D’OPÉRATIONS AUTRES QUE CELLESQUI SONT INDIQUÉES DANS CE DOCUMENT PEUVENTRÉSULTER EN UNE EXPOSITION À UN RAYONNEMENTDANGEREUX.N’OUVREZ PAS LES COUVERCLES ET N’ESSAYEZ PASD’EFFECTUER VOUS-MÊME DES RÉPARATIONS.ADRESSEZ-VOUS À UN PERSONNEL QUALIFIÉ POURTOUTE RÉPARATION.

MISE EN GARDE:POUR RÉDUIRE LES RISQUES D’INCENDIE OU D’ÉLEC-TROCUTION, N’EXPOSEZ PAS CET APPAREIL À LAPLUIE OU À L’HUMIDITÉ.

AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE OUD’INTERFÉRENCES, UTILISER UNIQUEMENT LESCOMPOSANTS FOURNIS.

PRECAUCIÓN:ÉSTE ES UN PRODUCTO LÁSER DE LA CLASE I. LA UTILIZACIÓN DE CONTROLES, EL HACERAJUSTES O EL SEGUIR PROCEDIMIENTOS DISTINTOSDE LOS ESPECIFICADOS EN ESTE MANUAL PODRÍACAUSAR UNA EXPOSICIÓN PELIGROSA A LA RA-DIACIÓN.NO ABRA LAS CUBIERTAS NI HAGA REPARACIONESUSTED MISMO. SOLICITE LOS TRABAJOS DE SERVI-CIO AL PERSONAL CALIFICADO.

ADVERTENCIA:PARA REDUCIR EL RIESGO DE INCENDIOS OSACUDIDAS ELÉCTRICAS, NO EXPONGA ESTEPRODUCTO A LA LLUVIA NI A LA HUMEDAD.

PARA REDUCIR EL RIESGO DE INCENDIOS O SACUDI-DAS ELÉCTRICAS, Y PARA EVITAR LAS INTERFERENCIAS MOLESTAS, UTILICE SOLAMENTE LOS COMPONENTES INCLUIDOS.

Produits laser:Longueur d’onde: 780 nmPuissance du laser: Aucune radiation dangereuse

n’est émise avec la protection desécurité.

Productos láser:Longitud de onda: 780 nmPotencia láser: Con protección de seguridad no se

emite radiación peligrosa.

C Q - D P X 1 5 1 UModel No.N˚ De Modèle

Serial No.N˚ De Série

Manufactured by Dalian Matsushita Communication Industrial Co., Ltd.Dalian China Made in China

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

15A12V 4~8 FM75

(CQ-DPX151U)

Label Indication and Location

§Déclaration d’interférence de fréquences radio(Partie 15 des Règlements FCC):Cet appareil numérique de Classe B est conforme aurèglement ICES-003 canadien.

FRANÇAIS

CQ-DPX151/DP101U5

ENGLISH

CQ-DPX151/DP101U4

Panasonic welcomes you to our ever growing family of electronic product owners. We know that this prod-uct will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanicalengineering, manufactured with carefully selected components and assembled by people who take pride intheir work. Once you discover the quality, reliability, and value we have built into this product, you too willbe proud to be a member of our family.

When DrivingKeep the volume level low enough to be aware ofroad and traffic conditions.

When Car WashingDo not expose the product, including the speakersand CDs, to water or excessive moisture. Thiscould cause electrical shorts, fire, or other damage.

When ParkedParking in direct sunlight can produce very hightemperatures inside your car. Give the interior achance to cool down before switching the unit on.

Use the Proper Power SupplyThis product is designed to operate with a 12 V DC,negative ground battery system (the normal systemin a North American car).

Disc MechanismDo not insert coins or any small objects. Keepscrewdrivers and other metallic objects away fromthe disc mechanism and disc.

Use Authorized ServicentersDo not attempt to disassemble or adjust this preci-sion product. Please refer to the Servicenter list in-cluding with this product for service assistance.

For InstallationThis product should be installed in a horizontal po-sition with the front end up at a convenient angle,but not more than 30x.

❐ Use this Product Safely

≥ Operating instructions .................................... 1≥ Installation hardware................1 set (➡ page 18)≥ Power connector ............................................ 1≥ Warranty card.................................................. 1

≥ Remote control unit ........................................ 1≥ Lithium battery (CR2025)................................ 1

❐ Components

Panasonic est heureuse de vous compter parmi les utilisateurs de ses appareils électroniques. Nous pouvons vous as-surer que cet appareil vous procurera de longues heures d’agrément. Notre réputation est fondée sur une ingénierieélectronique et mécanique de haute précision, laquelle préside à la fabrication d’appareils ne comportant que des com-posants de choix assemblés par un personnel soucieux de la bonne réputation acquise par la qualité de son travail.Après avoir découvert la qualité, la valeur et la fiabilité de cet appareil, vous aussi serez fier d’être un client Panasonic.

Mécanisme de disqueN’insérez pas de pièces de monnaie ou de petits objets.Gardez les tournevis et autres objets métalliques à l’écartdu mécanisme de disque et du disque.

RéparationNe tentez pas de démonter ou d’ajuster l’appareil vous-même. Veuillez vous référer à la liste des centres de ser-vice fournie avec cet appareil pour contacter le serviced’assistance.

InstallationL’appareil doit être installé en position horizontale avecson extrémité avant inclinée vers le haut à un angle com-mode, mais ne dépassant pas 30x.

Au volantRéglez le volume à un niveau qui ne risque pas de mas-quer les bruits ambiants.

Lavage de la voitureAfin de prévenir tout risque de court-circuit ou d’in-cendie, n’exposez pas l’équipement, y compris les haut-parleurs et les disques, à l’eau ou à une humiditéexcessive.

Voiture stationnéeL’habitacle d’une voiture immobile exposée au soleiltoutes vitres fermées devient rapidement très chaud.Laisser rafraîchir l’intérieur du véhicule avant d’utiliserl’appareil.

Source d’alimentationCet appareil est conçu pour fonctionner sur un systèmed’alimentation avec batterie de 12 V c.c. à massenégative (système standard sur les voitures de construc-tion nord-américaine).

❐ Précautions à prendre

≥ Manuel d’instructions.............................................. 1≥ Quincaillerie pour l’installation

..............................................1 ensemble (➡ page 38)≥ Connecteur d’alimentation ...................................... 1≥ Carte de garantie .................................................... 1

≥ Télécommande ........................................................ 1≥ Pile au lithium (CR2025) ........................................ 1

❐ Éléments constitutifs

ModelsFeatures CQ-DPX151U CQ-DP101U

Pre-Amp output connector Rear 2, Front 2 Rear 2

Remote control unit Included Not included

Note:≥ This operating instruction manual is for 2 models CQ-DPX151U and CQ-DP101U. All illustrations

throughout this manual represent model CQ-DPX151U unless otherwise specified. The following table de-scribes the differences between 2 models.

ModéleCommande CQ-DPX151U CQ-DP101U

Connecteur de sortie de préamplificateur Arrière 2, Avant 2 Arrière 2

Télécommande Fourni Non fourni

Only for CQ-DPX151UCQ-DPX151U seulement

Remarque:≥ Ce manuel a été conçu pour les 2 modèles CQ-DPX151U et CQ-DP101U. Toutes les illustrations du présent manuel

mettent en présence le modèle CQ-DPX151U à moins d’indication contraire. Le tableau ci-dessous décrit lesdifférences entre les 2 modèles.

ENGLISH

CQ-DPX151/DP101U7

Contents

ESPAÑOL

CQ-DPX151/DP101U6

ESPAÑOL

Panasonic le da la bienvenida a la familia constantemente en aumento de poseedores de productos electrónicos. Nosesforzamos en proporcionarle las ventajas de la ingeniería mecánica y electrónica de precisión, de una fabricación concomponentes cuidadosamente seleccionados, y de un montaje realizado por personas orgullosas de la reputación quesu trabajo ha cimentado para nuestra empresa. Estamos seguros de que este producto le proporcionará muchas horasde distracción y, una vez comprobada la calidad, el valor y la fiabilidad incorporados, usted también se sentirá orgul-loso de pertenecer a nuestra familia.

Cuando conduzcaMantenga el nivel del volumen suficientemente bajo paraestar atento a la carretera y a las condiciones del tráfico.

Cuando lave el automóvilNo exponga el equipo, incluyendo los altavoces y losCDs, al agua o a una humedad excesiva. Esto puedecausar cortocircuitos eléctricos, incendios u otros daños.

Cuando esté estacionadoEl estacionamiento a la luz solar directa puede producirtemperaturas muy altas en el interior de su vehículo.Procure enfriar el interior antes de encender la unidad.

Uso de la alimentación apropiadaEste equipo ha sido diseñado para funcionar con un sis-tema de batería de 12 V CC con negativo a masa (el sis-tema normal en un vehículo norteamericano).

Mecanismo de discoNo inserte monedas ni ningún objeto pequeño. Mantengalos destornilladores u otros objetos metálicos apartadosdel mecanismo de disco y del disco.

Uso de los centros de servicio autoriza-dosNo intente desmontar ni ajustar este equipo de precisión.Consulte la lista de centros de servicio incluidos con esteproducto para acudir a ellos cuando sea necesario.

InstalaciónLa unidad deberá instalarse en posición horizontal, con elextremo delantero hacia arriba formando un ángulo con-veniente, pero con no más de 30x.

❐ Uso de este equipo con seguridad

≥ Manual de instrucciones.......................................... 1≥ Accesorios suministrados ........1 juego (➡ página 58)≥ Conector de alimentación ........................................ 1≥ Tarjeta de garantía .................................................. 1

≥ Unidad del controlador remoto................................ 1≥ Pila de litio (CR2025) .............................................. 1

❐ Componentes

Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2Radio Frequency Interference Statement (Part 15 of the FCC Rules): . . . . 12Use this Product Safely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

❒ Remote Control Unit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Battery installation, battery notes, control reference guide

❒ Power and Sound Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11How to adjust the volume, tone and balance, setting mute, setting/resetting the time, selecting the clock display

❒ Radio Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Manual and automatic tuning, band selection, preset stations

❒ CD Player Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Disc insert and playback, stop and disc eject, CD play, track selection,search, repeat, random, scan and direct selection

❒ Installation Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Step-by-step procedures

❒ Anti-Theft System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Place the removable face plate into case, install removable face plate

❒ Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Cautions and wiring diagram

❒ Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Where to get service help, troubleshooting tips, error display messages

❒ Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Care of the unit, notes on CD

❒ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

FM

CQ-DPX151U solamente

ModeloCaracterísticas CQ-DPX151U CQ-DP101U

Conector de salida de preamplificador Trasero 2, Frontal 2 Trasero 2

Unidad del controlador remoto Suministrado No suministrado

Nota:≥ Este manual de instrucciones de operación serve para 2 modelos CQ-DPX151U y CQ-DP101U. Todas las ilustra-

ciones de este manual representan el modelo CQ-DPX151U, a menos que se especifique lo contrario. La tabla sigu-iente muestra las diferencias entre los 2 modelos.

Only for CQ-DPX151U

FRANÇAIS

CQ-DPX151/DP101U8

Table des matières

ESPAÑOL

CQ-DPX151/DP101U9

ÍndiceConsignes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page13Précautions à prendre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Éléments constitutifs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

❒ Préparation de la télécommande . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Installation de la pile, remarques sur la pile, guide de référence des commandes

❒ Commandes d’alimentation et de son . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Comment ajuster le volume, la tonalité et l’équilibre, réglage de la coupure du son,réglage de l’heure, remise à l’heure, sélection de l’affichage de l’horloge

❒ Fonctionnement de base de la radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Syntonisation manuelle et automatique, sélection de la bande et stations enmémoire

❒ Fonctionnement de base du lecteur CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Chargement/éjection du disque, lecture de CD, sélection des plages, repérage,lecture en reprise, lecture aléatoire, balayage des plages et sélection directe

❒ Guide d’installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Marche à suivre

❒ Système antivol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Mettre la plaque de façade amovible dans l’étui, installer la plaque de façadeamovible

❒ Branchements électriques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Précautions et schéma de câblage

❒ En cas de difficulté . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Service après-vente, guide de dépannage, affichage des messages d’erreur

❒ Entretien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Entretien de l’appareil, remarques relatives aux disques CD

❒ Données techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

FM

Información para su seguridad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Página13Uso de este equipo con seguridad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Componentes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

❒ Preparación del controlador remoto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Instalación de la pila, notas sobre la pila, guía de referencia de los controles

❒ Controles de alimentación y sonido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Cómo ajustar el volumen, tono y equilibrio, configuración de silenciamiento, puestainicial de la hora, reposición de la hora, selección de pantalla del reloj

❒ Radio: Conceptos generales. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Sintoniá manual y automática, selección de banda y preajuste de emisoras

❒ Reproductor de CD: Conceptos generales . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Carga/expulsión de un disco, reproducción de CD, selección de pista, búsqueda,repetición, selección aleatoria, exploración y selección directa

❒ Guía de instalación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Procedimientos paso a paso

❒ Sistema antirrobo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Coloque la placa frontal removible en la caja, instale la placa frontal removible

❒ Conexiones eléctricas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Medidas de precaución y diagrama del cableado

❒ Solución de problemas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Dónde obtener ayuda técnica, consejos sobre solución de problemas, mensajes deerror

❒ Mantenimiento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Cuidado del aparato, notas sobre los discos compactos

❒ Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

FM

CQ-DPX151U seulement CQ-DPX151U solamente

ENGLISH

2

CQ-DPX151/DP101U11

Power and Sound ControlsENGLISH

1

CQ-DPX151/DP101U10

Remote Control Unit PreparationBattery Installation1 Remove the battery holder.

Pull the holder by the position B while pushing posi-tion A in the direction indicated by the arrow.

2 Install the battery on the battery holder.Set a new battery properly with its (i) side facing upas shown in the figure.

3 Insert the battery holder.Push in the battery holder back into its original posi-tion.

Battery NotesRemove and dispose of an old battery immediately.Battery Information:≥ Battery type: Panasonic lithium battery (CR2025) (included)≥ Battery life: Approximately 6 months with normal use (at room temperature)

Back side

Lithium battery(included)

Battery holder Position A

Position B

≥ Do not disassemble or short the battery. Do not throw a battery into a fire.≥ Keep batteries away from children to avoid the risk of accidents.≥ Be careful to the local disposal rules when you dispose of batteries.

Control Reference GuideButtons of the remote control function in the same way as the controls on the main unit of the reference page.

Point the remote control unit at the main unit’s sensor (REMOTE).

Mute button (MUTE)(➡ page 11)

Volume control buttons(VOL, " #)(➡ page 11)

Tune/Track buttons(TUNE/TRACK, 6 5/% $)(➡ pages 14, 17)

Mode button (MODE)(➡ pages 14, 16)

Caution:≥ Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire.

Battery leakage may damage the unit.

Band button (BAND)(➡ page 14)

PWR

MODE

PRG

TUNETRACK

Car Audio

BAND/DISC UP

VOL

MUTE

(ATT)

Power button (PWR)(➡ page 11)

PowerTurn the key in the ignition until the accessory indica-tor lights.Power on: Press [SOURCE] (PWR).Power off: Press [SOURCE] (PWR) again and hold.

MutePress [MUTE] to mute the sound completely.

Press [MUTE] again to cancel.

Volume[" VOL]: Up[# VOL]: DownPress and hold for rapid adjustment.

Volume level (0 to 40)

Anti-volume-blast circuit:When the power is switched off and on again, the volume slowly rises to the previous level. The anti-volume-blast circuit will not work when the volume level is set lower than position 20 on the dis-play.

MUTE

<VOL

SEL

BAND

TUNE

MUTE M/L1 2 3 4 5 67 12

SOURCE

REPCQ-DPX151U CD RECEIVER 45WX4

LOUD

RANDOM

PWR

8 119 10

TRACK

DISP

MONO/LOC

REMOTE

SCAN/APM

LoudnessPress [LOUD] to enhance bass and trebletones at low or medium volume.

Press [LOUD] again to cancel.

LOUD

ACCON

Note:≥ Disc up button (DISC UP) cannot be used in this model.

Only for CQ-DPX151U

ENGLISH

4

CQ-DPX151/DP101U13

ENGLISH

3

CQ-DPX151/DP101U12

Power and Sound Controls (Continued)

<VOL

SEL

BAND

TUNE

MUTE M/L1 2 3 4 5 67 12

SOURCE

REPCQ-DPX151U CD RECEIVER 45WX4

LOUD

RANDOM

PWR

8 119 10

TRACK

DISP

MONO/LOC

REMOTE

SCAN/APM

Audio Mode (Bass/Treble/Balance/Fader)

Regular Mode

Volume Bass Treble

BalanceFader

Bass:

Adjustable range: j12 to i12Treble:

Adjustable range: j12 to i12

Balance:R (right speaker) or L (left speaker)

Fader:F (front speaker) or R (rear speaker)

Adjustable range: 1 to 15

Adjustable range: 1 to 15

<VOL

SEL

BAND

TUNE

MUTE M/L1 2 3 4 5 67 12

SOURCE

REPCQ-DPX151U CD RECEIVER 45WX4

LOUD

RANDOM

PWR

8 119 10

TRACK

DISP

MONO/LOC

REMOTE

SCAN/APM

Initial Time1 Press [DISP] (DISPLAY).

Hours2 Press and hold [DISP] (DISPLAY).

3 Press [% TUNE] or [$ TUNE].

Minutes4 Press [DISP] (DISPLAY).

5 Press [% TUNE] or [$ TUNE].

6 Press [DISP] (DISPLAY).

Note:≥ Press and hold [% TUNE] or [$ TUNE] to change

numbers rapidly.

Time ResetPress and hold [DISP] (DISPLAY) for more than 2 seconds to activate the time setting mode to resetthe time.Then, repeat steps 3 to 6.

Clock DisplayPress [DISP] (DISPLAY) to switch to the clock dis-play.

(Hours blink.)

(Hours set.)

(Minutes blink.)

(Minutes set.)

(End.)

Note:≥ The [DISP] (DISPLAY) button will not work while

the CD player is set to the scan play mode.Cancel the scan play mode before pressing[DISP] (DISPLAY).

The 12-hour system is used for the clock.

Clock Basics

Balance center

Fader center

Press [SEL] to select the audio mode.1

Broadcast station Clock display

Playing time Clock display

In CD player mode:

In tuner mode:

When the power is off:

No displayClock display

DISCTRACK

Note:≥ If no operation takes place for more than

5 seconds in audio mode (2 seconds in vol-ume mode), the display returns to the regularmode.

Press [" VOL] or [# VOL] to change eachlevel.2

ENGLISH

6

CQ-DPX151/DP101U15

ENGLISH

5

CQ-DPX151/DP101U14

Radio Basics

<VOL

SEL

BAND

TUNE

MUTE M/L1 2 3 4 5 67 12

SOURCE

REPCQ-DPX151U CD RECEIVER 45WX4

LOUD

RANDOM

PWR

8 119 10

TRACK

DISP

MONO/LOC

REMOTE

SCAN/APM

STEREO

Mono/Local SelectionMONO: Noise is significantly decreased when

weak signals are received from an FMbroadcast station.

LOCAL: Only strong signals of stations aresearched in seek tuning, while at theLOCAL OFF setting, relatively weak sig-nals are also searched.

FM broadcast: Press [M/L] (MONO/LOC) to change the mode. Release when at the desired mode.AM broadcast: Press [M/L] (MONO/LOC) to switch LOCAL modeon and off.

Mode SelectionPress [SOURCE] to change tothe radio mode.

<VOL

SEL

BAND

TUNE

MUTE M/L1 2 3 4 5 67 12

SOURCE

REPCQ-DPX151U CD RECEIVER 45WX4

LOUD

RANDOM

PWR

8 119 10

TRACK

DISP

MONO/LOC

REMOTE

SCAN/APM

Up to 6 stations each can be saved in the FM1,FM2, FM3 and AM preset station memories.

Note: ≥ You can change the memory presetting by re-

peating the above procedure.

Caution:≥ To ensure safety, never attempt to preset sta-

tions while you are driving.Radio CD player(When a CD is inserted.)

Source

FM stereo indicatorPreset number

Seek TuningPress and hold ...[$ TUNE]: Higher frequency[% TUNE]: Lower frequencyTuning will automatically stop when the signalsof the next broadcast station are received.

Manual Station Preset1 Use manual or seek tuning to find a station.

(➡ page 14)2 Press and hold one of the preset buttons [1]

to [6] until the display blinks once.

Preset Station Setting1

4

Tuning in a Preset StationPress the corresponding preset button [1] to [6]to tune in a preset station.

3

BandPress [BAND] to change the band.

2

Manual Tuning[$ TUNE]: Higher frequency[% TUNE]: Lower frequency

3

MONO

LOCAL

MONO OFF/LOCAL OFF

MONO

LOCAL

MONO

LOCAL

MONO

LOCAL

MONO ON/LOCAL OFF

MONO OFF/LOCAL ON

MONO ON/LOCAL ON

FM broadcast:

MONO

LOCALLOCAL OFF

MONO LOCAL ON

AM broadcast:

LOCAL

BandPress [BAND] to select a desired band.(➡ page 14)

1

Auto Station PresetPress and hold [BAND] (APM) for more than 2 seconds (auto preset memory).≥ The 6 strongest available stations will be auto-

matically saved in the memory under presetbuttons [1] to [6].

≥ Once set, the preset stations are sequentiallyscanned for 5 seconds each.

Note:≥ The stations manually preset on the selected

band will be deleted.

2

ENGLISH

8

CQ-DPX151/DP101U17

ENGLISH

7

CQ-DPX151/DP101U16

CD Player Basics

<VOL

SEL

BAND

TUNE

MUTE M/L1 2 3 4 5 67 12

SOURCE

REPCQ-DPX151U CD RECEIVER 45WX4

LOUD

RANDOM

PWR

8 119 10

TRACK

DISP

MONO/LOC

REMOTE

SCAN/APM

Track Selection[5TRACK]: Advance to the next track.[6TRACK]: Back to the beginning of the

current track. Back to the previous track.(Press twice.)

Display ChangePress [DISP] (DISPLAY) to switch to the clockdisplay.

Radio CD player(When a CD is inserted.)

Source

<VOL

SEL

BAND

TUNE

MUTE M/L1 2 3 4 5 67 12

SOURCE

REPCQ-DPX151U CD RECEIVER 45WX4

LOUD

RANDOM

PWR

8 119 10

TRACK

DISP

MONO/LOC

REMOTE

SCAN/APM

DISCTRACK

Mode SelectionPress [SOURCE] to change to the CD play mode.

Caution:≥ Only 12 cm CD is available for this unit.

Direct Track Selection≥ Press a track number button from [1] to [6].

The corresponding track starts playing.≥ Press and hold a track number button from [7] to

[12] ([1] to [6]) for more than 1 second.The corresponding track starts playing.

<CD player display> Track playing time Track number

Track number/Track playing time

Lights when the disc is loaded.

Lights when the disc is loaded.

Clock display

Listening to a CD

Label side

Press [<] (EJECT) to stop CD play and eject thedisc.During disc ejection, “EJ” (EJECT) will be dis-played.

Disc Insert and Playback

Stop and Disc Eject

Scan play Random playRepeat play

Random play

≥ Press and hold [REP] (RANDOM) for morethan 2 seconds.All the tracks are played in random order.

≥ Press and hold [REP] (RANDOM) again tocancel.

Scan play≥ Press [BAND] (SCAN).

The first 10 seconds of each track onthe disc are played in sequence.

≥ Press [BAND] (SCAN) again to cancel.

Repeat play≥ Press [REP].

The current track is repeated.≥ Press [REP] again to cancel.

Disc insertPlayback will start automatically.

“LOAd” will be displayed until the disc isloaded.

<

12

SOURCE

REPCD RECEIVER 45WX4

LOUD

RANDOM

PWR

1110

REMOTEDISC

TRACK

DISCR TRACK

DISCTRACK

REPDISC

TRACK

<

< (EJECT)

DISCTRACK

Track SearchPress and hold ...[5TRACK]: Fast forward[6TRACK]: Fast backwardRelease to resume the regular CD play.

When CD is in the playerPress [SOURCE] to change to CD play mode.

ENGLISH

10

CQ-DPX151/DP101U19

ENGLISH

9

CQ-DPX151/DP101U18

Installation Guide

WARNINGThis installation information is designed for experienced installers and is not in-tended for non-technical individuals. It does not contain warnings or cautions of po-tential dangers involved in attempting to install this product.

Any attempt to install this product in a motor car by anyone other than qualified in-staller could cause damage to the electrical system and could result in serious per-sonal injury or death.

❐ Installation Hardware If you encounter problems, please consult yournearest professional installer.

❐ Overview

No. Item Diagram Q’ty

6

7

8

Mounting collar

Hex. nut (5 mm·)

Rear support strap

Tapping screw(5 mm·a16 mm)

Mounting bolt (5 mm·)

Power connector

Removable face plate case

Trim plate

1

1

1

1

1

1

1

1

1

2

3

4

5

12 V DC Test bulb

Electricaltape

Side-cut pliers

❐ Required ToolsYou’ll need a screwdriver, a 1.5 V AA battery, andthe following:

❐ Dashboard SpecificationsThicknessMin. 3⁄16z (4.75 mm)Max. 7⁄32z (5.56 mm)

23⁄32z (53 mm)

75⁄32z (182 mm)

The first step in installation is to identify all the carwires you’ll use when hooking up your sound sys-tem.As you identify each wire, we suggest that you labelit using masking tape and a permanent marker.This will help avoid confusion when making con-nections later.

Note:≥ Do not connect the power connector to the stereo

unit until you have made all connections. If thereare no plastic caps on the stereo hooking wires,insulate all exposed leads with electrical tape untilyou are ready to use them. Identify the leads inthe following order.

Power LeadIf your car has a radio or is pre-wired for one: Cut the connector wires one at a time from the plug(leaving the leads as long as possible) so that youcan work with individual leads.

❐ Identify All Leads If your car is not wired for an audio unit: Go to the fuse block and find the fuse port for thebattery, usually marked BAT.

SpeakersIdentify the car speaker leads. There are two leadsfor each speaker which are usually color coded.A handy way to identify the speaker leads and thespeaker they are connected with is to test the leadsusing a 1.5 V AA battery as follows.Hold one lead against one pole of the battery andstroke the other lead across the other pole. You willhear a scraping sound in one of the speakers if youare holding a speaker lead.If not, keep testing different lead combinations untilyou have located all the speaker leads. When youlabel them, include the speaker location for each.

Antenna MotorIf your car is equipped with an automatic power an-tenna, identify the car motor antenna lead by con-necting one bulb tester lead to the car battery leadand touching the remaining exposed wires from thecut radio connector plug one at a time. You willhear the antenna motor activate when you touchthe correct wire.

AntennaThe antenna lead is a thick, black wire with a metalplug at the end.

This product should be installed by a professional.However, if you plan to install this product yourself,your first step is to decide where to install it. Theinstructions in these pages will guide you throughthe remaining steps: (Please refer to the “WARNING” statementabove.)

≥ Identify and label the car wires.≥ Connect the car wires to the wires of the power

connector.≥ Install the unit in the dashboard.≥ Check the operation of the unit.

Before you begin installation, look for the itemswhich are packed with your unit.

≥ Warranty Card…Fill this out promptly.≥ Panasonic Servicenter for Service Directory

…Keep for future reference in case the productneeds servicing.

≥ Installation Hardware…Needed for in-dash in-stallation.

Caution:≥ This unit operates with a 12 V DC negative

ground auto battery system only. Do not at-tempt to use it in any other system. Doing socould cause serious damage.

Turn the ignition on to the accessory position, andground one lead of the test bulb to the chassis.

Touch the other lead of the test bulb to each of theexposed wires from the cut radio connector plug.Touch one wire at a time until you find the outletthat causes the test bulb to light.

Now turn the ignition off and then on. If the bulbalso turns off and on, that outlet is the car powerlead.

If your car is not wired for an audio unit: Go to the fuse block and find the fuse port for radio(RADIO), accessory (ACC), or ignition (IGN).

Battery LeadIf your stereo unit has a yellow lead, you will needto locate the car’s battery lead. Otherwise you mayignore this procedure. (The yellow battery lead pro-vides continuous power to maintain a clock, memo-ry storage, or other function.)

If your car has a radio or is pre-wired for one: With the ignition and headlights off, identify the carbattery lead by grounding one lead of the test bulbto the chassis and checking the remaining exposedwires from the cut radio connector plug.

❐ Connect All LeadsNow that you have identified all the wires in the car,you are ready to begin connecting them to thestereo unit wires. The wiring diagram (➡ page 24)shows the proper connections and color coding ofthe leads.We strongly recommend that you test the unit be-fore making a final installation.You can set the unit on the floor and make tempo-rary connections to test the unit. Use electrical tapeto cover all exposed wires.

Important:≥ Connect the red power lead last, after you

have made and insulated all other connec-tions.

GroundConnect the black ground lead of the power con-nector to the metal car chassis.

ENGLISH

12

CQ-DPX151/DP101U21

ENGLISH

11

CQ-DPX151/DP101U20

Installation Guide (Continued)

SpeakersConnect the speaker wires. See the wiring diagram(➡ page 24) for the proper hookups. Follow the di-agram carefully to avoid damaging the speakersand the stereo unit.The speakers used must be able to handle morethan 45 W of audio power. If using an optionalaudio amplifier, the speakers should be able to han-dle the maximum amplifier output power. Speakerswith low input ratings can be damaged. Speakerimpedance should measure 4–8 ≠, which is typi-cally marked on most speakers. Lower or higherimpedance speakers will affect output and cancause both speaker and stereo unit damage.

Motor AntennaConnect the car motor antenna lead to the darkblue motor antenna relay control lead.

BatteryConnect the yellow battery lead to the correct radiowire or to the battery fuse port on the fuse block.

AntennaConnect the antenna by plugging the antenna leadinto the antenna receptacle.

EquipmentConnect any optional equipment such as an ampli-fier, according to the instructions furnished withthe equipment. Leave about 12z (30 cm) of dis-tance between the speaker leads/amplifier unit andthe antenna/antenna extension cord. Read the oper-ating and installation instructions of any equipmentyou will connect to this unit.

Power Connect the red power lead to the correct car radiowire or to the appropriate fuse port on the fuseblock.If the stereo unit functions properly with all theseconnections made, disconnect the wires and pro-ceed to the final installation.

❐ Final Checks1. Make sure that all wires are properly connected

and insulated.2. Make sure that the stereo unit is securely held in

the mounting collar.3. Turn on the ignition to check the unit for proper

operation.

If you have difficulties, consult your nearest author-ized professional installer for assistance.

❐ Preparation≥ We strongly recommend that you wear gloves

for installation work to protect yourself frominjuries.

≥ When bending the mounting tabs of themounting collar with a screwdriver, be carefulnot to injure your hands and fingers.

≥ Disconnect the cable from the negative - batteryterminal (see caution below).

≥ Unit should be installed in a horizontal positionwith the front end up at a convenient angle, butnot more than 30o.

Caution:≥ Do not disconnect the battery terminals of a

car with a trip or navigational computer sinceall user settings stored in memory will be lost.Instead take extra care with installing the unitto prevent shorts.

Less than 30x

First complete the electrical connections, andthen check them for correctness. (➡ page 24)

6 Power connector Lock lever (§)

Mounting tabs5 Mounting bolt

❐ Installation ProceduresInsert mounting collar 1 into the dashboard, andbend the mounting tabs out with a screwdriver.Make sure that the lock lever (§) is flush with themounting collar 1 (not projecting outward).

(a) Using the rear support strap 3

4 Tapping screw

2 Hex. nut

3 Rear supportstrap

5 Mounting bolt

1 Mounting collar

Fire wall of car

3 mm·

(b) Using the rubber cushion (option)

5 Mounting bolt

1 Mounting collar

Rear support bracket(provided on the car)Rubber cushion (option)

Lock lever (§)

❐ Final InstallationLead ConnectionsConnect all wires, making sure that each connec-tion is insulated and secure. Bundle all loose wiresand fasten them with tape so they will not fall downlater. Now insert the stereo unit into the mountingcollar.

Congratulations! After making a few final checks,you’re ready to enjoy your new auto stereo system.

Dashboard InstallationInstallation Opening

(182 mm)

(53 mm)

75/32q

23/32q

1

Secure the rear of the unit.After fixing mounting bolt 5 and power connector6, fix the rear of the unit to the car body by eithermethod (a) or (b) shown below.Insert trim plate 8.

After installation, reconnect the negative -battery terminal.

2

3

4

This unit can be installed in any dashboard havingan opening as shown above. The dashboard shouldbe 3⁄16z (4.75 mm)j7⁄32z (5.56 mm) thick in order tobe able to support the unit.

ENGLISH

14

CQ-DPX151/DP101U23

ENGLISH

13

CQ-DPX151/DP101U22

Anti-Theft SystemInstallation Guide (Continued)

Remove the removable face plate.1 Press ['] (release button). The removable

face plate will be released.

2 Pull on the right side of the unit.

1

2

Remove the Unit

8 Trim plate

<

<

SOURCE

REP

RANDOM

PWR

Remove the trim plate 8 with a screwdriver.

Pull out the unit while pushing down the locklever with a screwdriver.

Remove the unit pulling with both hands.

1Contact

Main unit

Lock lever

ScrewdriverInstall Removable Face Plate1 Slide the left side of the removable face plate in

place.2 Press the right end of the removable face plate

until “click” is heard.

Cautions:≥ This face plate is not water-proof. Do not expose it to water or excessive moisture.≥ Do not remove the face plate while driving your car.≥ Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.≥ Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical

contacts.≥ If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.≥ Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or

it might be damaged.

This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.

Place the Removable FacePlate into Case1 Switch off the power of the unit.2 Remove the removable face plate. (➡ page 22)3 Gently press the button of the case and open

the cover. Place the face plate into the case andtake it with you when you leave the car.

2

1 <

7 Removable face plate case

Plastic tab

2

3

4

Switch off the power of the unit.

Lock lever

Cutout

Release button

ENGLISH

16

CQ-DPX151/DP101U25

TroubleshootingENGLISH

15

CQ-DPX151/DP101U24

Electrical Connections

❐ Wiring Diagram

No. Item Q’ty

6 Power connector 1

Power connectorAntenna

6

YellowBattery leadTo the car battery, continuous +12 V DC

Fuse (15 A)

RedPower leadTo ACC power,+12 V DC

Dark blue/white stripeDark blueMotor antenna relay control lead(To motor antenna) (Max. 500 mA)This lead is not intended for use with switchactuated power antenna.

BlackGround leadTo a clean, bare metallic part of car chassis.

(r)(s)(r)(s)(r)(s) (r)(s)

Left speaker (Front)

Right speaker(Front)

White Gray Green VioletWhite/black stripe

Green/black stripe

Violet/black stripe

Gray/black stripe

FRONT SP REAR SP

Left speaker (Rear)

Right speaker(Rear)

Speaker lead

Pre-Amp output connector (Front)Pre-Amp output connector (Rear)

L (White)R (Red)

Only for CQ-DPX151U

CQ-DPX151/DP101U

Amp. relay control power lead(Max. 500 mA)This lead is for connection to the power amplifier.

BATTERY 15A

ACC

If the fuse (rear panel) blows frequently, they may be something wrong with the unit. Consult your nearest Panasonic Servicenter for service.

§

§

Cautions:≥ This product is designed to operate of a 12 V DC, negative ground battery system.≥ To prevent damage to the unit, be sure to follow the wiring diagram below.≥ Remove approx. 1⁄4z (5 mm) of protective covering from the ends of the leads before connecting.≥ Do not insert the power connector into the unit until the wiring is completed.≥ Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables

and keep cable terminals free from touching any metal parts.≥ Remember, if your car has a drive computer or a navigation computer, the data of its memory may be

erased when the battery terminals are disconnected.

Preliminary StepsCheck and take steps as described in the tables below.

If You Suspect Something WrongImmediately switch power off.Disconnect the power connector and check that there is nei-ther smoke nor heat from the unit before asking for repairs.Never try to repair the unit yourself because it is dangerous todo so.

No power.

Trouble

Car’s engine switch is not on.➡ Turn your car’s ignition switch to ACC or ON.

Troubleshooting Tips❐ Common

Cables are not correctly connected. ➡ Connect cables correctly.

Battery cable is not correctly connected. ➡ Connect the battery cable to the terminal that is always live.

Accessory cable is not correctly connected. ➡ Connect the accessory cable to your car’s ACC source.

Grounding wire is not correctly connected. ➡ Connect the grounding wire to a metal part of the car.

Fuse is burnt.➡ Call the store where you purchased the unit, or your nearest service

station (see the attached sheet) and ask for fuse replacement.

No sound.

Mute is set to ON.➡ Set it to OFF.

Cables are not correctly connected.➡ Connect cables correctly.

Condensation (dew)➡ Wait for a while before use.

Cautions:≥ Do not use the unit if it malfunctions or

is something wrong.≥ Do not use the unit in abnormal condi-

tion, for example, without sound, orwith smoke or foul smell, can cause ig-nition or electric shock. Immediatelystop using it and call the store whereyou purchased it.

Cause/Step

Accessory used for wiring

❐ Radio

Much noise in FM stereoand monaural broad-casts.

Station is too far, or signals are too weak.➡ Select other stations of higher signal level.

Battery cable is not correctly connected.➡ Connect the battery cable to the terminal that is always live.

Preset station is reset.

Trouble Cause/Step

ENGLISH

18

CQ-DPX151/DP101U27

Troubleshooting (Continued)ENGLISH

17

CQ-DPX151/DP101U26

CD is dirty.➡ Clean CD, referring to the section on “Notes on CD”.

Mounting angle is over 30o.➡ Adjust mounting angle to less than 30o.

Instable mounting.➡ Mount the unit securely with the mounting parts, referring to the

section on installation.

≥ CD is defective.≥ Mechanical trouble.➡ Press [<] (EJECT). If normal operation is not restored yet, call the

store where you purchased the unit or the nearest service station toask for repairs.

CD sound skips, tonequality is low.

Sound skips due to vi-bration.

CD is not ejected.

CD is inside but nosound.

CD is upside down.➡ Place CD in the correct direction, and the label side up.

❐ CD

CD is dirty.➡ Clean CD, referring to the section on “Notes on CD”.

Trouble Cause/Step

No sound from left,right, front or rearspeakers.

Left and right balance, or front and rear balance is off on one side.➡ Adjust balance/fader mode as appropriate.

Cables are not correctly connected.➡ Connect the cables correctly.

❐ Sound Setting

The right speaker wire is connected to the left speaker and the left speak-er wire to the right speaker.➡ Connect the speaker wires to the correct ones.

Left and right sounds arereversed in stereo lis-tening.

Buttons are invalid foroperation.

Battery poles (i) (j) are reversed.➡ Insert the battery correctly.

❐ Remote Control

Wrong the battery.➡ Check the battery.

Battery has run down.➡ Replace the battery.

Remote control is in the wrong direction.➡ Direct the remote control at sensor (REMOTE) on the panel.

Trouble Cause/Step

Trouble Cause/Step

MaintenanceYour product is designed and manufactured to ensure a minimum of maintenance. Use a soft cloth for routineexterior cleaning. Never use benzine, thinner or other solvents.

Product ServicingIf the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest au-thorized Panasonic Servicenter. The product should be serviced only by a qualified technician.

Replacing the FuseUse fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or con-necting the unit directly without a fuse, could cause fire or damage to the stereo unit. If the replacement fuse fails, contact your nearest Panasonic Servicenter for service.

Error Display Messages❐ CD

Disc has scars.➡ The disc is ejected automatically.

Disc is dirty, or is upside down.➡ The disc is ejected automatically.

No operation by some cause.➡ Turn off the car engine (ACC off) and remove the fuse from the

battery lead (yellow) for 1 minute. Then reinstall the fuse.

Display Cause/Step

Only for CQ-DPX151U

CQ-DPX151/DP101U29

ENGLISH

19

CQ-DPX151/DP101U28

Specifications❐ GeneralPower supply: 12 V DC (11 Vj16 V), test voltage 14.4 V, negative groundCurrent consumption: Less than 2.2 A (CD play mode; 0.5 Wa4 channels)Maximum power output: 45 Wa4 channels at 1 kHz, Volume control maximumTone adjustment range:

Bass: n12 dB at 100 HzTreble: n12 dB at 10 kHz

Suitable speaker impedance: 4j8 ≠Pre-Amp output voltage: 2.0 V (CD play mode; 1 kHz, 0 dB)Output impedance: 200 ≠ (CQ-DPX151U)

600 ≠ (CQ-DP101U)Dimensions (WaHaD): 7za115/16 za57/8 z (178a50a150 mm)Weight: 3 lbs. 5 oz (1.5 kg)

❐ FM Stereo RadioFrequency range: 87.9 MHzj107.9 MHzUsable sensitivity: 11.0 dBf. (1.25 ¨V, 75 ≠)50 dB quieting sensitivity: 15.2 dBf. (1.6 ¨V, 75 ≠)Frequency response: 30 Hzj15 kHz (n3 dB)Alternate channel selectivity: 75 dBStereo separation: 42 dB (1 kHz)Image response ratio: 75 dBIF response ratio: 100 dB Signal/noise ratio: 70 dB

❐ AM RadioFrequency range: 530 kHzj1 710 kHzUsable sensitivity: 28 dB/¨V (25 ¨V, S/N 20 dB)

❐ CD PlayerSampling frequency: 32 times oversamplingDA converter: MASH • 1 bit/4 DAC systemError correction system: Panasonic super decoding algorithmPick-up type: Astigma 3-beamLight source: Semiconductor laserWave length: 780 nmFrequency response: 20 Hzj20 kHz (n1 dB)Signal/noise ratio: 96 dBTotal harmonic distortion: 0.01 % (1 kHz)Wow and flutter: Below measurable limitsChannel separation: 75 dB

Above specifications comply with EIA standards.

Note:≥ Specifications and the design are subject to modification without notice due to improvements in technology.

ENGLISH

20

How to hold the CD≥ Do not touch the underside of the disc.≥ Do not make scratches on the disc.≥ Do not bend disc.≥ When not in use, keep CD in the case.

Do not use irregular shaped CDs.

Do not leave discs on the following places:≥ Direct sunlight≥ Near car heaters≥ Dirty, dusty and damp areas≥ Seats and dashboards

Disc cleaningUse a dry, soft cloth to wipe from the center outward.

Caution on new discsA new disc may have rough edges on its inner and outerperimeter. These may cause malfunction.Remove the rough edges using a pencil, etc.

ONLY USE DISCS CARRYING THE LABEL.

Care of the Unit❐ Cleaning this UnitUse a dry, soft cloth to wipe.

❐ Caution on CleaningNever use solvents such as benzine, thinner as theymay mar the surface of the unit.

Notes on CD

Maintenance

Label side

<Right> <Wrong>

Rough edge

Rough edge

Do not use irregular shaped CDs.

CQ-DPX151/DP101U71

CQ-DPX151/DP101U70

Memorandum

Panasonic Consumer ElectronicsCompany, Division of MatsushitaElectric Corporation of AmericaOne Panasonic Way, Secaucus, New Jersey 07094http://www.panasonic.com

Panasonic Sales Company.Division of Matsushita Electric ofPuerto Rico, Inc. (“PSC”)Ave. 65 de Infanteria, Km. 9.5San Gabriel Industrial Park, Carolina, Puerto Rico 00985http://www.panasonic.com

Panasonic Canada Inc.5770 Ambler Drive,Mississauga, OntarioL4W 2T3 http://www.panasonic.ca

YEFM283667 F1100-1031 Printed in ChinaImprimé en ChineImpreso en China