manualmanual - avm international · 2014-04-07 · trademark notice ... 1 welcome to fritz!card pnp...

High-Performance ISDN by . . .

m a n u a lM a n u a l Engl

ish

Editi

on

2

FRITZ!CARD PNPThis manual and the software it describes are protected by copyright. The manual andsoftware as presented are the object of a license agreement and may be used only inaccordance with the license conditions. The licensee bears all risk in regard to hazardsand impairments of quality which may arise in connection with the use of this product.

This manual and the software it describes may not be transmitted, reproduced or alteredin whole or in part, in any form, by any means, nor may they be translated into any othernatural or computer language. The creation of a backup copy for personal use is ex-cepted. The information hereby made available to the licensee may be communicated tothird parties only with the written permission of AVM Berlin.

This software and documentation have been produced with all due care and checked forcorrectness in accordance with the best available technology. AVM Berlin disclaims allliability and warranties, whether express or implied, relating to this product’s quality,performance or suitability for any given purpose which deviates from the performancespecifications contained in the product description.

AVM will not be liable for damages arising directly or indirectly from the use of the manualor related software, nor for incidental or consequential damages, except in case of intentor gross negligence. AVM expressly disclaims all liability for loss of or damage to hard-ware, software or data as a result of direct or indirect errors or destruction and for anycosts, including ISDN connection charges, related to the software and manual suppliedand due to incorrect installations not performed by AVM itself.

The information in this manual and the software it describes are subject to change with-out notice for the purpose of technical improvement.

Copyright 1998 AVM Berlin. All rights reserved.Copyright 1998 AVM Berlin. All rights reserved.Copyright 1998 AVM Berlin. All rights reserved.Copyright 1998 AVM Berlin. All rights reserved.Copyright 1998 AVM Berlin. All rights reserved.

AVM Audiovisuelles Marketing AVM Computersystemeund Computersysteme GmbH Vertriebs GmbH & Co.KGAlt-Moabit 95 Alt-Moabit 95D-10559 Berlin D-10559 BerlinFRITZ!Card Support:Tel.: +49/ 30/390 04 390

AVM Data Call Center (ADC): AVM on the Internet:+49/ 30/39 98 43 00 http://www.avm.de

ftp://ftp.avm.de

Trademark notice: AVM and FRITZ! are registered trademarks of AVM Vertriebs KG.Windows is a registered trademark of Microsoft Corporation. All other trademarks aretrademarks of the respective owners.

Contents

3

CONTENTS

1 Welcome to FRITZ!Card PnP .......................................... 41.1 What was Delivered? ............................................................................................4

1.2 Latest Drivers for FRITZ!Card PnP ...........................................................................5

1.3 How to Contact Us.................................................................................................5

2 All about FRITZ!Card PnP .............................................. 62.1 What Does FRITZ!Card PnP Require? ......................................................................7

2.2 How Does FRITZ!Card PnP Work? ...........................................................................7

2.3 Freedom for Your Connection ................................................................................9

2.4 FRITZ!Card PnP on the ISDN Connection................................................................ 11

2.5 Getting It Right! ................................................................................................... 13

3 How to Install FRITZ!Card PnP .................................... 143.1 Installation in Windows 95 .................................................................................. 14

3.2 Installation in Windows NT 4.0 (Workstation i386) .............................................. 18

3.3 Installation in Windows 3.x .................................................................................22

4 Into the Internet with FRITZ!Card PnP ...................... 264.1 Concept of the AVM System Drivers in the MS Windows System ..........................26

4.2 The AVM ISDN CAPI Port Driver .............................................................................27

4.3 The AVM NDIS WAN CAPI Driver ............................................................................28

4.4 Requirements for Provider or Remote Site ...........................................................28

4.5 ISDN CAPI Port Driver or NDIS WAN CAPI Driver? ...................................................29

5 FRITZ! Installation ........................................................ 305.1 What Can FRITZ! Do? ........................................................................................... 31

5.2 Help for FRITZ! .....................................................................................................32

1 Welcome to FRITZ!Card PnP

4

1 WELCOME TO FRITZ!CARD PNP

This manual is your introduction to FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.

1.1 What was Delivered?

After opening and unpacking the box, you should have thefollowing on the table in front of you:

• 11111 FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP

FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP is an AAAAAVM VM VM VM VM ISDN Controller which establishsthe connection between your PC and ISDN.

• 1 ISDN cable1 ISDN cable1 ISDN cable1 ISDN cable1 ISDN cable

The supplied cable allows you to connect FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP tothe ISDN socket.

• 1 F1 F1 F1 F1 FRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP CD-R CD-R CD-R CD-R CD-ROOOOOMMMMM

The CD includes an introduction which provides you withinformation about the contents of the CD and assists you withthe installation of FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP in Windows 95, WindowsNT 4.0 and Windows 3.x. You can start the introduction bygoing into the Explorer and double-clicking on the fileINTRO.HLP in the root directory on the CD.

The CD additionally contains the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP installationprograms for the Windows 95, Windows NT 4.0 (Workstationi386) and Windows 3.x platforms, and also the installationprograms for the FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! communications software for Win-dows 95 and Windows NT 4.0 (Workstation i386) as well as forWindows 3.x, and the AVM system drivers. You will find detaileddocumentation on the CD.

If the computer in which you want to install FRITZ!Card PnP does nothave a CD-ROM drive, you may copy the required software onto diskettesfor private purposes. AVM will not supply the FRITZ!Card PnP softwareon diskettes.

1 Welcome to FRITZ!Card PnP

5

• 1 F1 F1 F1 F1 FRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP manual manual manual manual manual

(you are reading it right now)

• 1 F1 F1 F1 F1 FRRRRRITZ!32 manualITZ!32 manualITZ!32 manualITZ!32 manualITZ!32 manual

Manual for the FRITZ!32 communications software

• 1 registration card1 registration card1 registration card1 registration card1 registration card

This card is used for registering customers in the AVMAVMAVMAVMAVMcustomer database. You can only benefit from the AAAAAVM VM VM VM VM supportfacilities after returning your registration card.

1.2 Latest Drivers for FRITZ!Card PnP

AAAAAVM VM VM VM VM makes the latest drivers for FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP available toyou free of charge. You can obtain these drivers from the AAAAAVMVMVMVMVMData Call Center (ADC)Data Call Center (ADC)Data Call Center (ADC)Data Call Center (ADC)Data Call Center (ADC), or from the AVMAVMAVMAVMAVM FTP server over theInternet.

1.3 How to Contact Us

AVM Data Call Center (ADC)AVM Data Call Center (ADC)AVM Data Call Center (ADC)AVM Data Call Center (ADC)AVM Data Call Center (ADC)+49/(0) 30/39 98 43 00 (IDtrans protocol)

AVM on the InternetAVM on the InternetAVM on the InternetAVM on the InternetAVM on the Internethttp://www.avm.deftp://ftp.avm.de

FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card Suppord Suppord Suppord Suppord Support bt bt bt bt by telephoney telephoney telephoney telephoney telephone+49/(0) 30/390 04 390

You can get information about AVM products on the Internet. Werecommend that you contact the ADC when downloading new driversbecause access is faster.

2 All about FRITZ!Card PnP

6

2 ALL ABOUT FRITZ!CARD PNP

Included with the F F F F FRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP is an integrated communica-tions package which makes the advantages of ISDN available toyou: a high transfer rate, rapid establishment of connections,optimum line quality and maximum operational reliability.

FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP consists of several different components:

• The AAAAAVMVMVMVMVM ISDN Controller FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP with the associateddriver software. FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP provides the connectionbetween the ISDN and application programs on the computer,for example FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! and other CAPI applications.

You can install FRITZ!Card PnP in Windows 95, Windows NT 4.0(Workstation i386) or Windows 3.x. For further information, pleaserefer to the relevant sections.

• The FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! Windows software, a compact and powerful ISDNcommunications program. The CD contains both the 16-bitversion of FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! for Windows 3.x and also the 32-bit versionfor Windows 95 and Windows NT.

••••• The AAAAAVM IVM IVM IVM IVM ISDN CSDN CSDN CSDN CSDN CAPAPAPAPAPI PI PI PI PI Pororororort Drivt Drivt Drivt Drivt Drivererererer and the AAAAAVM NVM NVM NVM NVM NDIDIDIDIDIS S S S S WWWWWAAAAANNNNNCCCCCAPAPAPAPAPI DrivI DrivI DrivI DrivI Drivererererer. These drivers enable the ISDN integration ofoperating system functions under Windows 95 and WindowsNT 4.0 (Workstation i386). They permit utilization of “RemoteAccess Service” (RAS) and allow you to connect your computerto the server of an Internet provider by way of the TCP/IPstack and the Dial-Up Networking application of Windows 95and NT 4.0.

For further information about the architecture, deployment oppor-tunities and technical prerequisites for the AVM system drivers,please refer to Chapter 4 “Into the Internet with FRITZ!Card PnP”.

Windows 95 andNT 4.0 @ Internet


7

2.1 What Does FRITZ!Card PnP Require?

The following requirements must be met before you can operatethe AVM ISDN Controller FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP in your computer:

• Your computer must have a free 8-bit or 16-bit plug-in slot forISA cards.

• Find out which protocol is provided on your ISDN line by theISDN network operator. Connections employing the DSS1 or1TR6 protocol are possible. Connections installed after 1994are generally DSS1 connections (Euro-ISDN connections).FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP supports also the American protocols NationalISDN-1 (NI-1) and 5ESS Custom.

• An IBM or 100% compatible computer with a hard disk and aCD-ROM drive.

• Microsoft Windows 3.x for installation of the 16-bit version ofFFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ!.

• Microsoft Windows 95 or Windows NT 4.0 (Workstation i386)for installation of the 32-bit version of FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ!.

••••• If you intend to use the functions CCCCCAPAPAPAPAPI SoftModem I SoftModem I SoftModem I SoftModem I SoftModem V32V32V32V32V32 forreceiving faxes and CCCCCAPAPAPAPAPI SoftComprI SoftComprI SoftComprI SoftComprI SoftCompression X75/V42bisession X75/V42bisession X75/V42bisession X75/V42bisession X75/V42bis (seepage 8) for data compression, we recommend a computerwith a Pentium processor and a minimum 16 MB of RAM.

If all these requirements are met, you can install FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.

FRITZ!Card PnP and the software supplied with it have been devel-oped as a single workstation solution and are intended exclusively forthe connection of an individual PC to ISDN.

2.2 How Does FRITZ!Card PnP Work?

FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP simply plugs into a free ISA slot. It is connectedto the ISDN Basic Rate Interface (BRI) via the S0 interface onFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP. . . . . This interface is connected to the ISDN connec-tion by means of the supplied cable.


8

The driver software associated with FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP is loadedfrom the hard disk upon starting Windows. It controls the commu-nication and data transfer processes, for example the simulta-neous use of both B channels.

FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP supports version 2.0 of the standardized inter-face COMMON-ISDN-API (CAPI). Programs from other manufactur-ers based on CAPI 2.0 can also be used with FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP. ThisCAPI version also allows you to work with CAPI 1.1 applications.

FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP simultaneously processes both channels of aBRI or an ISDN access (2 x 64000 bits/s). Along with the smallsize, the “Plug and Play” functionality is a decisive advantage foryou. It is no longer necessary to consider resources such as the I/O address or interrupts because the operating system performsthe configuration for the card automatically through its Plug andPlay functionality (as in Windows 95 for example). FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!CardddddPnPPnPPnPPnPPnP is a PC plug-in card which uses passive technology, i.e. thereis no processor on the card. All computing operations are per-formed by the processor in the PC.

Functions of the driver software

The driver software with CAPI 2.0 processes the D channel proto-cols of the ISDN connection and makes all the requisite B chan-nel protocols (X75, HDLC etc.) available to the applications. Inaddition, CAPI 2.0 offers the SoftCompression X75/V42bis,SoftModem and SoftFax performance features.

The driver software for FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP supports data com-pression as per V.42bis for X.75 connections in accordance withthe CAPI standard. The connection times and costs can be con-siderably reduced when using this type of data compression onaccount of faster transfer rates. Data compression is activated ordeactivated at the request of your ISDN application, e.g. byFFFFFRRRRRITZ!dataITZ!dataITZ!dataITZ!dataITZ!data.

In addition to the digital performance features, you can utilizeanalog services such as Group 3 Fax (CAPI SoftFax G3) and Mo-dem (CAPI SoftModem V32) with FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.

The current driver software allows you to use FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Carddddd with allCAPI-based Windows fax applications. The controller supportsthe sending and receiving of faxes at a rate of up to 14400 baud.It can be used like a Group 3 fax machine.

SoftCompressionX75/V42bis

CAPI SoftFax


9

FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP additionally offers the CAPI SoftModem perfor-mance feature. On the basis of this modem emulation, it is pos-sible to establish a connection from an ISDN connection to ana-log remote parties which are connected to the telephone net-work via a modem.

Refer to the readme file for further details about the aforementionedperformance features CAPI SoftCompression, CAPI SoftFax and CAPISoftModem.

2.3 Freedom for Your Connection

FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP enables you to establish connections with vari-ous services and remote site. The basic principle for successfulconnections and transfer operations is: The other site must havea terminal device which is either of the same type or is compat-ible.

The current standards are listed in the following:

InternetIn order to dial an Internet Service Provider (ISP) using the Dial-UpNetworking application of Windows 95 and Windows NT 4.0, youuse the PPP over ISDN protocol (synchronous PPP) with the ISDNAVM CAPI Port Driver or the AVM NDIS WAN CAPI Driver. For furtherinformation, please refer to Chapter 4 “Into the Internet withFRITZ!Card PnP”. Windows 3.x users are recommended to dial inthrough a 16-bit client of an online service provider. Further infor-mation about settings and applications can be obtained fromyour service provider.

Online servicesIn order to dial online services you require the access softwarefor a service provider. Further information about installation andconfiguration of the application can be obtained from your ser-vice provider.

ISDN file transferFor ISDN file transfer you use FFFFFRRRRRITZ!dataITZ!dataITZ!dataITZ!dataITZ!data with the IIIIIDtrDtrDtrDtrDtransansansansans orEEEEEurururururofileofileofileofileofile transfer protocols. The use of V.42bis data compressionon both sides optimizes the transfer rate considerably.

CAPI SoftModem


10

Group 3 faxFor faxing to devices with the Group 3 fax standard, the fax emu-lation is generated in the CAPI driver. The user-friendly and prac-tical FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! module FFFFFRRRRRITZ!faxITZ!faxITZ!faxITZ!faxITZ!fax is the recommended fax applica-tion.

After installation of the AVM ISDN CAPI Port Driver, you can alsosend and receive faxes using the virtual modem AAAAAVM IVM IVM IVM IVM ISDN FSDN FSDN FSDN FSDN FAAAAAXXXXX(G3)(G3)(G3)(G3)(G3). Other fax applications offering CAPI 2.0 support can simi-larly be used.

VoiceThe FFFFFRRRRRITZ!vITZ!vITZ!vITZ!vITZ!voooooxxxxx ISDN answering machine is supplied in order toutilize the voice functions of FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Carddddd. In addition to this, youcan use telephony software from other vendors offering CAPI 2.0support.

ISDN BBS systemsFFFFFRRRRRITZ!comITZ!comITZ!comITZ!comITZ!com with the B channel setups for the X.75 and V.110 pro-tocols is available to you for dialing ISDN BBS systems. Alterna-tively, after installation of the AVM CAPI Port Driver you can alsouse the modem AVM ISDN BBS (X.75)AVM ISDN BBS (X.75)AVM ISDN BBS (X.75)AVM ISDN BBS (X.75)AVM ISDN BBS (X.75) to dial ISDN BBS systems,or use terminal programs from other vendors.

Analog BBS systemsYou can use FFFFFRRRRRITZ!comITZ!comITZ!comITZ!comITZ!com with the B channel setup “Modem Ana-log” for dialing analog BBS systems. Alternatively, after installa-tion of the AVM CAPI Port Driver you can also use the modem AAAAAVMVMVMVMVMIIIIISDN Analog Modem (VSDN Analog Modem (VSDN Analog Modem (VSDN Analog Modem (VSDN Analog Modem (V.32).32).32).32).32) to dial analog BBS systems, or useterminal programs from other vendors.

Remote Access Service, Intranet, X.31 etc.If you wish to use those services, you should contact the relevantservice provider for information about access conditions and set-tings.

The following diagram shows how the individual components ofFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP work together:


11

Fig. 1 FRITZ!Card PnP Functional Diagram

2.4 FRITZ!Card PnP on the ISDN Connection

When your ISDN connection is installed, your ISDN network op-erator first installs a so-called network terminator (NT). A networkterminator is equipped with two ISDN sockets. Each of these ISDNsockets is an external S0 interface.

IIIIIn most cases, an ISDN PBX with analog extensions is connectedto one ISDN socket and a digital terminal device is connected tothe second ISDN socket. Existing analog terminal equipment suchas telephones, cordless telephones, answering machines andGroup 3 fax machines are connected to the extensions of thePBX. The connected devices are addressed by way of multiplesubscriber numbers (MSN). Each ISDN connection has at leastthree MSNs. If you have connected your PBX to one of the ISDNsockets and your PC containing the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP to the otherISDN socket, you will require additional ISDN sockets to connectother ISDN terminal equipment such as an ISDN telephone (seegray area in the following Fig. 2).

COMMON-ISDN-API 2.0

FRITZ!Card PnP

B channel protocols (digital):X75, HDLC, transparent,V110, V120, T90, ISO 8208 (X25)

AVMNDISWANCAPIDriver

AVMISDNCAPIPort

Driver

Applications suchas Exchange/

Explorer/Browser/Outlook

FR

ITZ

!dat

a

FRIT

Z!fa

x

FR

ITZ

!com

FR

ITZ

!vox

Add

ition

al C

AP

I-ba

sed

ISD

N s

oftw

are

Onl

ine-

Sof

twar

e

CAPI Soft-CompressionX75/V42bis

CAPI Soft-Modem V32

CAPI Soft-Fax G3

C A P I


12

Fig. 2 Typical Configuration of an ISDN Multiple Connection

There are PBXs which offer digital as well as analog extensions.You can connect ISDN terminal devices to these digital exten-sions. Digital extensions are also known as internal S0 interfaces.They are an alternative connection facility to external S0 inter-faces.

Whether you connect your FRITZ!Card PnP to an internal or external S0

interface - the ISDN terminal device is not the FRITZ!Card PnP but theISDN software on your PC, such as the FRITZ! modules FRITZ!data,FRITZ!fax and FRITZ!vox for example.

All incoming calls from the ISDN are distinguished not only bytheir multiple subscriber number but also by their service indica-tor. No such differentiation takes place for calls coming in fromthe analog network, in which telephone calls and faxes sharethe service indicator “voice”. This is why it is important to specifywhich call is to be accepted with which MSN by which FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ!module or by an ISDN telephone or a PBX. Please refer to theFFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! manual or the FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! online help for the detailed con-figuration instructions.

Thus, if you wish to receive faxes as well as data with FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!CardddddPnPPnPPnPPnPPnP, you do not need to assign different multiple subscriber num-bers to these two applications because FFFFFRRRRRITZ!faxITZ!faxITZ!faxITZ!faxITZ!fax is respon-sible for calls with the “voice” indicator and FFFFFRRRRRITZ!dataITZ!dataITZ!dataITZ!dataITZ!data for callswith the “data” indicator. FFFFFRRRRRITZ!faxITZ!faxITZ!faxITZ!faxITZ!fax and the answering machineFFFFFRRRRRITZ!vITZ!vITZ!vITZ!vITZ!voooooxxxxx both use the same service indicator (“voice”), how-ever.

Analo g telephone withanswerin g machine

ISDNtelephone

FaxCordlesstelephone

ISDN systemwith ananlo gextensions

SSOO

NTNT

SSOO SSOO

Computer withFRITZ!Card PnP


13

If you use FRITZ!fax at the same time as FRITZ!vox, you must allocatedifferent multiple subscriber numbers to the two modules in order thatincoming calls can be assigned without ambiguity.

2.5 Getting It Right!

You should observe the following installation sequence for theFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP components:

1. Installation of FFFFF RRRRR ITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP and the driver software(Chapter 3 “How to Install FRITZ!Card PnP”).

2. Installation of the FFFFF RRRRR ITZ!ITZ!ITZ!ITZ!ITZ! or FFFFF RRRRR ITZ!32ITZ!32ITZ!32ITZ!32ITZ!32 communicationssoftware (Chapter 5 “FRITZ! Installation“) including the CAPIPort Driver.

3. Installation of the AVM system drivers (Chapter 4 “Into theInternet with FRITZ!Card PnP”).

4. Installation of software for online services such as AOL,videotext services etc.

You must:

You should:

You can:

3 How to Install FRITZ!Card PnP – Windows 95

14

3 HOW TO INSTALL FRITZ!CARD PNP

You have the facility to install FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP in Windows 95,Windows NT 4.0 (Workstation i386) or Windows 3.x. For furtherinformation, please refer to the relevant sections.

3.1 Installation in Windows 95

The FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card CDd CDd CDd CDd CD contains an introduction which provides youwith information about the contents of the CD. You can start theintroduction by going into the Explorer and double-clicking onthe file INTRO.HLP in the root directory on the CD.

Check before commencing installation of FRITZ!Card PnP which versionof Windows 95 is installed on your computer (Control Panel / System /General). The installation procedure for the driver software differs inthe Windows 95 versions 4.00950 and 4.00.950b (or later).

FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP is installed on your computer by means of asimple installation program. Installation is performed in three mainsteps:

1.1.1.1.1. Physical installation of FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP in your computer.

2.2.2.2.2. Connection of FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP to the ISDN network.

3.3.3.3.3. Automatic hardware detection by the Windows 95 Plug andPlay mechanism, and installation of the driver software forFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.....

With Windows 95 it is absolutely essential to observe the sequence ofthe installation steps. If you fail to follow the specified sequence,error-free operation of FRITZ!Card PnP is not guaranteed.

1. Physically Installing FRITZ!Card PnP in the Computer

• Switch your computer off and unplug the power connectorcable.

• Loosen the screws of the computer housing and open thecomputer.


15

• Select an appropriate slot, remove the protective plate on thetop end and insert FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP into the slot with theconnector strip facing forward into the slot until the card isfirmly located.

• Screw FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP tightly to the top end of the slot.

• Close the computer, tighten the screws and reconnect thepower plug.

Physical installation of FFFFF RRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP is now completed.FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP must now be connected to ISDN.

2. Connecting FRITZ!Card PnP to ISDN

• Take the cable supplied with the card. and insert the plug onone end of the ISDN cable into the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP socket.

• Insert the other end of the ISDN cable into the ISDN socket.

3. Automatic Hardware Detection and Installation of the DriverSoftware for FRITZ!Card PnP

Once FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP has been installed in your computer andthe card has been connected to ISDN, the third step is automatichardware detection of FFFFF RRRRR ITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP and subsequentinstallation of the driver software. Proceed as follows to carry outthese actions:

• Switch your computer back on.

• Shortly after Windows 95 starts, the window “New hardwarefound” appears with a message indicating that the Windows95 Add New Hardware Wizard has found the AVM ISDN-Con-troller FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.

• After the driver database of Windows 95 has been updated,you are requested to install a new hardware driver. Mark theentry „Driver on manufacturer’s disk“.

• Now insert the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP CD into your CD drive.

• In the next window, click on the Have Disk…Have Disk…Have Disk…Have Disk…Have Disk… button and thenwith the aid of the Search...Search...Search...Search...Search... button specify the path for theinstallation files, e.g. D:\CARDWARE\WINDOWS.95.

First steps inWindows 954.00.950


16

• Confirm your selection twice with OKOKOKOKOK. The driver informationis then copied into a temporary folder on your computer.

• The next window to appear is the AVM welcome screen for thedriver software installation program.

The remaining steps are identical for the different Windows 95versions. Refer to the section on “Further Installation Steps” forthe remainder of the installation procedure for the driver software.

• After the driver database of Windows 95 has been updated,the Device Driver Updates Wizard requests you to install newhardware drivers. To do so, insert the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP CD intoyour CD drive.

• In the next window, click on the Other Locations... Other Locations... Other Locations... Other Locations... Other Locations... buttonand then with the aid of the Browse Browse Browse Browse Browse button specify the pathfor the installation files, e.g. D:\CARDWARE\WINDOWS.95.

• Confirm your selection with OKOKOKOKOK and, in the next window, withFinishFinishFinishFinishFinish. Ignore the message “Insert Data Medium” whichappears in the following window and simply confirm with OKOKOKOKOK.

• In the window “Copying Files”, click on the Browse Browse Browse Browse Browse buttonand again enter the path for the installation files. Confirmtwice with OKOKOKOKOK. The driver information is then copied into atemporary folder on your computer.

• The next window to appear is the welcome window for thedriver software installation program.

• In the welcome window, click on NextNextNextNextNext. You can quit theinstallation procedure at any time by means of the Exit Exit Exit Exit Exit button.

• In the next window, select the “Installation” option and clickon NextNextNextNextNext.

• In the following window, specify the folder in which you wishto install the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP driver software. The default isC:\IDRIVER. You can specify any other folder on your computer.If the information you have given is correct, click on NextNextNextNextNext.

• Now specify which D channel protocol D channel protocol D channel protocol D channel protocol D channel protocol is used on your ISDNconnection (cf. page 7). Click on the desired options and thenclick on NextNextNextNextNext.

First steps inWindows 954.00.950 b

Further installationsteps


17

The installation program will now copy all files to the specifiedfolder. The driver is entered in the Registry so that theFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP controller is activated automatically whenWindows 95 is started. When you exit Windows 95, thecontroller is automatically deactivated.

• In the next window of the installation, you receive informationabout the I/O address and the interrupt the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnPuses.

• Now restart your computer.

Restarting the computer completes the installation of the driversoftware for FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP. You can then place the controllerinto operation.

After installation, the menu item “Programs” in the Start menucontains a new folder called AVMAVMAVMAVMAVM. This contains the filesFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP R R R R Readmeeadmeeadmeeadmeeadme, FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP Setup Setup Setup Setup Setup,,,,, FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!CardddddPnPPnPPnPPnPPnP TTTTTest est est est est and AAAAAVM Internet Home PVM Internet Home PVM Internet Home PVM Internet Home PVM Internet Home Pageageageageage (link to the AVM pageson the Internet).

FRITZ!Card PnP Readme contains up-to-date information on FRITZ!CardPnP. Using the FRITZ!Card PnP Setup program, you can change thesettings for the D channel protocol and deactivate data compression.The FRITZ!Card PnP Test program checks the functional integrity ofFRITZ!Card PnP.

3.1.1 Uninstalling the PnP Card in Windows 95

To uninstall FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP in Windows 95, open the ControlPanel of Windows 95 (Start/Settings) and double-click on theAdd/RAdd/RAdd/RAdd/RAdd/Remoemoemoemoemovvvvve Pe Pe Pe Pe Prrrrrogrogrogrogrogramsamsamsamsams icon. AAAAAVM FVM FVM FVM FVM FRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP is includedin the list of installed software. Mark this entry and then click onthe Add/RemoveAdd/RemoveAdd/RemoveAdd/RemoveAdd/Remove button. The uninstall program is started. Confirmyour intention to uninstall the software by clicking YesYesYesYesYes. Finallyyou are requested to restart the computer. This concludes thedeinstallation of FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.

3 How to Install FRITZ!Card PnP – Windows NT

18

3.2 Installation in Windows NT 4.0 (Workstation i386)

Before commencing the installation, it is absolutely essential that youobserve the following points:

1. Go into your computer’s BIOS and check whether it contains theentry “PnP OS installed” (possibly under the heading “PnP andBIOS Setup”). If it does, enter “No”.

2. Note that you must install the current Microsoft Service Packincluding the driver ISAPNP (pnpisa.inf and pnpisa.sys, which youcan obtain directly from Microsoft) on your computer before installingFRITZ!Card PnP on your computer. Copy the files to a temporaryfolder on your hard disk, click with the right mousebutton on“pnpisa.inf”, choose “Install” and confirm with “Yes”. Finallyrestart your computer.

3. You must have administrator rights!

Install FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP with the aid of the introduction containedon the CD. This introduction guides you through the installationprocedure with information and instructions.

Start the CD introduction by going into the Explorer and double-clicking on the file INTRO.HLP in the root directory of theFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP CD.




3.3.3.3.3. Automatic hardware detection by the Windows NT Plug andPlay mechanism, and installation of the driver software forFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.

With Windows NT it is absolutely essential to observe the sequence ofthe installation steps. If you fail to follow the specified sequence,error-free operation of FRITZ!Card PnP is not guaranteed.


19




• Select an appropriate slot, remove the protective plate on thetop end and insert FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP into the slot with the con-nector strip facing forward into the slot until the card is firmlylocated.



Physical installation of FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP is now completed. Thecontroller must now be connected to ISDN.


• Take the cable supplied with the card and insert the plug onone end of the ISDN cable into the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP socket.


3. Automatic Hardware Detection and Installation of the DriverSoftware for FRITZ!Card PnP

Once FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP has been installed in your computer andthe card has been connected to ISDN, the third step takes place:installation of the driver software. Proceed as follows to carry outthis action:

• Restart your computer.

• Shortly after Windows NT is started, the window “New hard-ware found” appears with a message indicating that the Win-dows NT Add New Hardware Wizard has found the AVM ISDN-Controller FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.

• You are requested to install a new hardware driver. Mark theentry “Driver from disk provided by hardware manufacturer”.

• Now insert the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Carddddd CD into your CD drive.


20

• In the next window, click on the Browse...Browse...Browse...Browse...Browse... button and specifythe path for the installation files, e.g. D:\CARDWARE\WIN-DOWS.NT. Confirm with OKOKOKOKOK.

• In the next window, “Select Device”, double-click on the entry“AVM ISDN-Controller”.

The driver files for FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP are then copied into atemporary folder. The window “Changed System Settings” thenappears. You are requested to restart the computer.

• Restart the computer.

• Once Windows NT has started up, the welcome screen for theinstallation program appears. Click on ContinueContinueContinueContinueContinue. You can quitthe installation procedure at any time by means of the CancelCancelCancelCancelCancelbutton.

• In the next window, specify the folder in which you wish toinstall the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP software. The default is C:\IDRIVER.You may also specify a different folder. If the information youhave given is correct, click on ContinueContinueContinueContinueContinue.

• Now specify which D channel protocol D channel protocol D channel protocol D channel protocol D channel protocol is used on your ISDNconnection (cf. page 7). Click on the desired options and thenclick on ContinueContinueContinueContinueContinue.

The installation program will now copy all files to the speci-fied folder. The driver is entered in the Registry so that theFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP controller is activated automatically whenWindows NT is started. When you exit Windows NT, the con-troller is automatically deactivated.

• In the next window of the installation, you receive informationabout the I/O address and the interrupt which FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!CardddddPnPPnPPnPPnPPnP uses.

• Now restart your computer.

Restarting the computer completes the installation of the driversoftware for FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP. You can then begin using thecontroller.

After installation, the menu item “Programs” in the Start menucontains a new folder called AVMAVMAVMAVMAVM. This contains the filesFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP R R R R Readmeeadmeeadmeeadmeeadme, FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP Setup Setup Setup Setup Setup,,,,, FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Carddddd


21

PnPPnPPnPPnPPnP TTTTTest est est est est and AAAAAVM Internet Home PVM Internet Home PVM Internet Home PVM Internet Home PVM Internet Home Pageageageageage (link to the AVM pageson the Internet).

FRITZ!Card PnP Readme contains up-to-date information on FRITZ!CardPnP. Using the FRITZ!Card PnP Setup program, you can change thesettings for the D channel protocol and deactivate data compression.The FRITZ!Card PnP Test program checks the functional integrity ofFRITZ!Card PnP.

3.2.1 Uninstalling the PnP Card in Windows NT

To uninstall FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Carddddd in Windows NT, open the Control Panelof Windows NT (Start/Settings) and double-click on the Add/Add/Add/Add/Add/RRRRRemoemoemoemoemovvvvve Pe Pe Pe Pe Prrrrrogrogrogrogrogramsamsamsamsams icon. AAAAAVM FVM FVM FVM FVM FRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP is included in thelist of installed software. Mark this entry and then click on theAdd/RemoveAdd/RemoveAdd/RemoveAdd/RemoveAdd/Remove button. The uninstall program is started. Confirmyour intention to uninstall the software by clicking YesYesYesYesYes. Finallyyou are requested to restart the computer. This concludes thedeinstallation of the driver software for FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.

3 How to Install FRITZ!Card PnP – Windows 3.x

22

3.3 Installation in Windows 3.x

You can install FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP with the aid of the introductioncontained on the CD. This introduction guides you through theinstallation procedure with information and instructions. Start theCD introduction by going into the File Manager and double-click-ing on the file INTRO.HLP in the root directory of the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!CardddddCD.




3.3.3.3.3. Installation of the driver software for FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.

With Windows 3.x it is absolutely essential to observe the sequence ofthe installation steps. If you fail to follow the specified sequence,error-free operation of FRITZ!Card PnP is not guaranteed.




• Select an appropriate slot, remove the protective plate on thetop end and insert FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP into the slot with the con-nector strip facing forward into the slot until the card is firmlylocated.



Physical installation of FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP is now completed. Thecontroller must now be connected to ISDN.


23


• Take the cable supplied with the card and insert the plug onone end of the ISDN cable into the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP socket.


3. Installation of the Driver Software for FRITZ!Card PnP

Once FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP has been installed in your computer andthe card has been connected to ISDN, you may install the driversoftware for FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP. Proceed as follows:

• Switch your computer back on and start Windows.

• Insert the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Carddddd CD into your CD drive and call up the CDintroduction by double-clicking on the file INTRO.HLP in theroot directory of the CD.

• On the welcome page of the introduction, click on the icon forFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP and on the next page, click on the WWWWWindoindoindoindoindowswswswsws3.x3.x3.x3.x3.x icon.

• On the next page, choose the button for the ISDN-ControllerISDN-ControllerISDN-ControllerISDN-ControllerISDN-ControllerFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.

• Then click on the “Install ...” icon. The message “InitializingSetup...” appears. After completion of initialization, the wel-come screen for installation appears. Activate the ContinueContinueContinueContinueContinuecommand. You can quit the installation procedure at any timeby means of the Cancel Cancel Cancel Cancel Cancel button.

• In the next window, specify the directory in which you wish toinstall the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP software. The default is C:\IDRIVER.You can also specify another directory. If the information youhave given is correct, click on ContinueContinueContinueContinueContinue.

• Now specify which D channel protocol D channel protocol D channel protocol D channel protocol D channel protocol is used on your ISDNconnection (cf. page 7). Also specify here whether you wish toactivate or deactivate data comprdata comprdata comprdata comprdata compression ession ession ession ession as per V.42bis. Clickon the desired options and then click on ContinueContinueContinueContinueContinue.

The installation program will now copy all files to the speci-fied directory. A new program group called AAAAAVM VM VM VM VM is createdunder Windows. This group contains the icon FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnPReadmeReadmeReadmeReadmeReadme.


24

• In the last window of the installation, you are informed thatyou need to restart your computer in order to load the driverfor FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.

The driver for the card is entered in the SSSSSYYYYYSSSSSTTTTTEEEEEM.IM.IM.IM.IM.INNNNNIIIII file sothat FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP is activated automatically on startingWindows 3.x. On exiting Windows 3.x, the PnP controller isautomatically deactivated. In addition, the SSSSSYYYYYSSSSSTTTTTEEEEEM.IM.IM.IM.IM.INNNNNI I I I I fileis extended by the section [AVM ISDN-Controller FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!CardddddPnPPnPPnPPnPPnP], in which the selected I/O address and the interrupt arenoted.

The following lines are entered in the AAAAAUTUTUTUTUTOEOEOEOEOEXXXXXEC.BAEC.BAEC.BAEC.BAEC.BATTTTT file.FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP is automatically initialized by means of the“fenable” command each time the computer starts.

::FRITZ!Card PnPC:\IDRIVER\fenable -h::FRITZ!Card PnP

The old AUTOEXEC.BAT is saved as AUTOEXEC.AVM to allow it tobe used again subsequently.

For the latest information on FRITZ!Card PnP, double-click on the“FRITZ!Card PnP Readme” icon in the “AVM” program group.

3.3.1 Placing FRITZ!Card PnP into Operation in Windows 3.x

Restart your computer to place FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP into operation.

If you do not want to perform a restart, you must reinitialize thecontroller with the aid of the program FENABL.EXE. As this is aDOS program, it is absolutely essential that the initialization takesplace on the DOS level. Terminate Windows and enter the follow-ing command at the DOS prompt:

fenable <RETURN>

The following message appears on the screen:

FFFFFEEEEENNNNNABABABABABLLLLLE: Slot x installed with porE: Slot x installed with porE: Slot x installed with porE: Slot x installed with porE: Slot x installed with port y and interrupt z.t y and interrupt z.t y and interrupt z.t y and interrupt z.t y and interrupt z.

Then start Windows as usual. Now each time Windows starts, theVxD driver is loaded for FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP.


25

3.3.2 Changing the Settings

If you wish to subsequently change the D channel protocol or thesettings for data compression, run the installation program forFFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP again.

3.3.2 Uninstalling FRITZ!Card in Windows 3.x

To uninstall FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Carddddd, call up the Setup program from theFFFFF RRRRR ITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP CD. After the welcome screen, select the“Uninstall” option. Follow the on-screen instructions.

The AUTOEXEC.BAT is changed during the installation procedure. De-lete the lines added during the installation of FRITZ!Card PnP (seeprevious page).

4 Into the Internet with FRITZ!Card PnP

26

4 INTO THE INTERNET WITH FRITZ!CARD PNP

In addition to the traditional ISDN services file transfer, fax, video-text etc. based on the ISDN interface COMMON-ISDN-API (CAPI),FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP also supports connections to the Internet.

For connection to the Internet using FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP, AVM offersyou the following system drivers for Windows 95 and WindowsNT:

• AVM ISDN CAPI Port Driver

• AVM NDIS WAN CAPI Driver

4.1 Concept of the AVM System Drivers in the MSWindows System

Windows 95 and Windows NT offer two communications modelswith similar functionality: ISDN CAPI Port Driver and NDIS WANCAPI Driver. Both drivers are implemented in VxD technology asWindows system drivers and are addressed through the Dial-UpNetworking application, but utilize different mechanisms and in-terfaces / protocols in the operating system. Basically the sametransfer rates are attained in data communications with the twodrivers. Both drivers can be installed in parallel on one system, ifrequired.

The AVM system drivers make it possible for you to utilize commu-nications programs (such as FRITZ!) via the Windows Dial-Up Net-working application in parallel to CAPI-based ISDN software, forexample for dialing in to the Internet (see functional diagram onpage 11).


27

4.2 The AVM ISDN CAPI Port Driver

The AAAAAVM IVM IVM IVM IVM ISDN CSDN CSDN CSDN CSDN CAPAPAPAPAPI PI PI PI PI Pororororort Drivt Drivt Drivt Drivt Drivererererer allows programs with a suitableinterface (VCOM ”Modem”) to also use the communications in-terfaces of Windows 95 for ISDN.

When the ISDN CAPI Port Driver is installed, a number of “virtualmodems” which can be accessed by suitable programs are setup in the operating system. These “modems” differ only by virtueof their preconfigured register settings. This means that in addi-tion to Internet connections (modem: AVM ISDN Internet (PPP)),you can also establish connections with BBS systems (hyper-terminal and modem AVM ISDN X.75) or fax machines (MS Ex-change and modem AVM ISDN Fax G3). The special advantage ofthis idea is that the full functional diversity of CAPI continues tobe supported. Thus, both special ISDN applications and also CAPImodems can work simultaneously in the send and receive direc-tions on both B channels.

A full description of the functions of the AVM ISDN CAPI Port Driveralong with detailed installation instructions may be found in the fileCAPIPORT.HLP in the folder WINPORT\CAPIPORT.W95 on the FRITZ!CardCD.

You can define particular subscriber numbers for incoming and outgo-ing calls. In the case of the CAPI Port Drivers, you set these multiplesubscriber numbers by means of AT commands. This setting is per-formed under Start > Settings > Control Panel > Modems > Connec-tions > Settings > Advanced.

Set the subscriber number for outgoing calls by means of ATS49 =<subscriber number> and the subscriber number for incoming calls bymeans of ATS50 = <subscriber number>. Separate multiple entries bymeans of semicolons.


28

4.3 The AVM NDIS WAN CAPI Driver

The AAAAAVM NVM NVM NVM NVM NDIDIDIDIDIS S S S S WWWWWAAAAAN CN CN CN CN CAPAPAPAPAPI DrivI DrivI DrivI DrivI Drivererererer permits the integration of op-erating systems Windows 95 and Windows NT and the ISDN.

The AVM NDIS WAN CAPI Driver permits the use of Remote AccessServices (RAS) via ISDN. NDIS is the abbreviation for NNNNNetworkDDDDDevice IIIIInterface SSSSSpecification and is a standard for interfacingnetwork cards (hardware) to network protocols (software). NDISWAN is a Microsoft extension of this standard in respect of widearea networking (WAN). The NDIS WAN CAPI Driver for ISDN thuspermits the use of the ISDN controller as a WAN card, in whichcase the ISDN controller is addressed via the COMMON-ISDN-API(CAPI).

A full description of the functions of the AVM NDIS WAN CAPI Driveralong with detailed installation instructions may be found for Windows95 in the file NDIS_95.HLP in the folder WINPORT\NDISWAN.W95 andfor Windows NT in the file NDIS_NT.HLP in the folder WINPORT\NDISWAN.WNT on the FRITZ!Card CD.

4.4 Requirements for Provider or Remote Site

For successful access to the Internet or for RAS connections, yourprovider or the remote site (in the case of RAS connections) shouldprovide digital access and use the same protocol mechanisms asyou.

In particular, the following requirements should be met:

• The provider / remote site must provide ISDN access.

• The access should support the “synchronous PPP” (Point toPoint Protocol) according to Standard RFC 1618 or “PPPasynchronous”.

• Registration with your provider can take place by checkingyour telephone number and/or by PAP/CHAP authentication.

• Optional allocation of a static or dynamic Internet address (IPaddress).

In order to keep your telephone costs low, you are best advisedto look for a provider with a local point of presence.


29

4.5 ISDN CAPI Port Driver or NDIS WAN CAPI Driver?

The deployment opportunities for the respective driver concept aredescribed in detail in the associated documentation (HLP files).

The following recommendations for use with ISDN and Windowscan be made to start with on the basis of a benefit-oriented com-parison:

• For Internet providers offering PPP over ISDN (“synchronousPPP” according to RFC 1618), both the ISDN CAPI Port Driverand the NDIS WAN CAPI Driver are suitable. You should askyour provider whether the PPP over ISDN protocol is supported.

• In the case of Internet providers not offering PPP over ISDN, itis normally possible to dial in via the CAPI port modem “PPPasynchronous”. With the ISDN CAPI Port Driver, it is alsopossible to support “special solutions” by way of registersettings. You should ask your Internet provider. On account ofthe system design, the NDIS WAN CAPI Driver does not offerthis functionality.

• Both drivers are suitable for access to RAS servers.

• ”Non-Internet applications” such as MS Money 97 or terminalprograms for example can only be used via ISDN CAPI PortDrivers (status as of August 1998).

5 FRITZ! Installation

30

5 FRITZ! INSTALLATION

On the CD you will find two different versions of the FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ!communications software. FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! is a 16-bit version for Windows3.x. FFFFFRRRRRITZ!32ITZ!32ITZ!32ITZ!32ITZ!32 is a 32-bit version for Windows 95 and Windows NT.Both versions are based on the CAPI 2.0 application interface.

The procedure for installing either versions of FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! is the same.Proceed as follows to install FFFFFRRRRRITZ! ITZ! ITZ! ITZ! ITZ! or FFFFFRRRRRITZ!32ITZ!32ITZ!32ITZ!32ITZ!32:

• Restart your computer. If you are using Windows 3.x, openWindows.

• Insert the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP CD in your CD drive again.

You start the introduction by going into the Explorer anddouble-clicking on the file INTRO.HLP in the root directory onthe CD.

• On the first page, click on the F F F F FRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP icon.

• On the next page, select the operating system installed onyour computer by clicking on the corresponding icon.

• On the following page, click on the icon FFFFFRRRRRITZ!32 SoftwarITZ!32 SoftwarITZ!32 SoftwarITZ!32 SoftwarITZ!32 SoftwareeeeePPPPPackageackageackageackageackage or FFFFFRRRRRITZ! SoftwarITZ! SoftwarITZ! SoftwarITZ! SoftwarITZ! Software Pe Pe Pe Pe Packageackageackageackageackage.

• To start the installation, click the SSSSStartartartartart Installationt Installationt Installationt Installationt Installation button onthe following page.

• The initialization sequence of the installation program isdisplayed. When initialization has been completed, thewelcome screen for the installation is displayed. Activate theContinue Continue Continue Continue Continue command. You can quit the installation procedureat any time by means of the Cancel Cancel Cancel Cancel Cancel button.

• First specify the folder/directory in which FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! is to beinstalled. The default for Windows 95 and Windows NT isC:\PROGRAM FILES\FRITZ!\. The default for Windows 3.x isC:\FRITZ!. You can specify any path you wish. Confirm yourchoice with ContinueContinueContinueContinueContinue.

• In the next window displayed, choose a program group forFFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ!. The default is FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ!. Confirm with ContinueContinueContinueContinueContinue.


31

• You then need to decide whether “Quick installation“ or“Installation with configuration“ is to be performed.

If you select Quick InstallationQuick InstallationQuick InstallationQuick InstallationQuick Installation, FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! is installed with thedefault settings in the specified directory/folder. Allconfiguration parameters can then be entered into theindividual FRITZ! modules. See the corresponding sections inthe manual or the online help for relevant information.

If you select Installation and ConfigurationInstallation and ConfigurationInstallation and ConfigurationInstallation and ConfigurationInstallation and Configuration, you can makeindividual entries such as the MSN for the service in question(e.g. fax), the name of your computer for FFFFFRRRRRITZ!dataITZ!dataITZ!dataITZ!dataITZ!data, andinformation relating to operation on a PBX.

Confirm your selection by clicking on the ContinueContinueContinueContinueContinue button.Once you have entered all the information required, theprogram is installed and the program group FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! is created.

Installation of FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! is now finished.

FFFFF RRRRR ITZ!ITZ!ITZ!ITZ!ITZ! comprises the modules FFFFF RRRRR ITZ!dataITZ!dataITZ!dataITZ!dataITZ!data (file transfer),FFFFFRRRRRITZ!fax ITZ!fax ITZ!fax ITZ!fax ITZ!fax (Group 3 fax), FFFFFRRRRRITZ!com ITZ!com ITZ!com ITZ!com ITZ!com (BBS terminal), F F F F FRRRRRITZ!vITZ!vITZ!vITZ!vITZ!voooooxxxxx(ISDN answering machine) and utilities.

Detailed information may be found in the FRITZ! manuals and inthe online help for FRITZ! and FRITZ!32.

5.1 What Can FRITZ! Do?

With FFFFFRRRRRITZ!dataITZ!dataITZ!dataITZ!dataITZ!data, information which is always up-to-date can beexchanged with field employees.

FFFFFRRRRRITZ!fax ITZ!fax ITZ!fax ITZ!fax ITZ!fax handles fax communication with practically no loss oftime, directly from a word processing program.

FFFFFRRRRRITZ!vITZ!vITZ!vITZ!vITZ!vooooox x x x x gives you an ISDN answering machine for your PC.

And for entertainment after work, you can use FFFFFRRRRRITZ!comITZ!comITZ!comITZ!comITZ!com toquickly load a new game from an ISDN BBS.

Happy traveling in ISDN with FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ!!


32

5.2 Help for FRITZ!

The following F F F F FRRRRRITZ!ITZ!ITZ!ITZ!ITZ! manuals can be found on the CD:

FFFFFRRRRRITZ!ITZ!ITZ!ITZ!ITZ! Detailed manual for the 16-bitversion of FRITZ!

FFFFFRRRRRITZ!32ITZ!32ITZ!32ITZ!32ITZ!32 Detailed manual for the 32-bitversion of FRITZ!

The manuals use the PDF format (Portable Document Format).You can read, search and print these documents by using theAdobe Acrobat Reader. The installation program for the AdobeAcrobat Reader is also included on the FFFFFRRRRRITZ!CarITZ!CarITZ!CarITZ!CarITZ!Card PnPd PnPd PnPd PnPd PnP CD.

manualmanual - avm international · 2014-04-07 · trademark notice ... 1 welcome to fritz!card pnp...

Documents