ACE Blender Operator ManualChapter 10 Tote Truck CHAPTER 10 TOTE TRUCK The TOTE Truck is comprised of storage tanks and sensors to measure and display the status of the fluid inventories on the unit.These sensors may include weight, level and straps. CHAPTER 10 TOTE TRUCK............................................................................................................... 10-1 10.1MANIFOLD DISPLAY................................................................................................................ 10-2 10.2FLUID DENSITY DISPLAY ........................................................................................................ 10-3 Figure 1 KILGORE TOTE TRUCK 101310018 D00339943 rev. CPage 10-1 ACE Blender Operator ManualChapter 10 Tote Truck 10.1 Manifold Display The TOTE Truck manifold displays information pertinent to the unit.Eight tanks are displayed along with primary information about each tank.Set up values are saved at application shutdown and used at subsequent application start up. Physical identification and location of tote. Calculated Tank volume displayed in units of volume, both as a numeric and graphic.This value is calculated using fluid density and empty tote weight.The graphic is scaled from 0 to 100% of tank maximum volume.Select this graphic to characterize the tank. User descriptive name, limited to 13 characters Tank weight displayed in units of weight, i.e. pounds.Weight will include empty tote weight. Tank discharge rate displayed in weight per time units, i.e. pounds per minute Tank discharge rate displayed in volume per time units, i.e. gallons per minute Other manifold display are selected through this button 101310018 D00339943 rev. CPage 10-2 ACE Blender Operator ManualChapter 10 Tote Truck Select the DONE button to exit this window 10.2 Fluid Density Display This window displays the characteristics of the selected tank.The window also displays a chemical library.Double click the mouse cursor on a chemical name to select that name and its chemicals fluid properties. User descriptive name, display is limited to 13 characters. Click the mouse cursor in the field and edit the name The density of the chemical currently in use.The user can alter this value or select another chemical. Display the characteristics of the next tank in the list. Toggle button to indicate change in window values, select these buttons to confirm changes 101310018 D00339943 rev. CPage 10-3 ACE Blender Operator ManualChapter 10 Tote Truck Capacity of the tank, select the button to enter the capacity. The weight of the tote (tank) with no fluid, select the button to enter the weight.This will offset the manifold display calculated volume. Enter additional chemicals and their characteristics to the chemical library.Window prompts will ask the user for name and density of the chemical. Select the DONE button to exit this window 101310018 D00339943 rev. CPage 10-4 ACE Blender Operator ManualChapter 10 Tote Truck NOTE 101310018 D00339943 rev. CPage 10-5