manual force test stand es30 · 2018. 1. 3. · the es30 is a versatile test stand ideal for many...
TRANSCRIPT
-
Data Sheet
Mark-10 Corporation n www.mark-10.com n [email protected]: 888-MARK-TEN n Tel: 631-842-9200 n Fax: 631-842-9201
Specifications subject to change without prior notice
The ES30 is a versatile test stand ideal for many compression and tensile testing applications. It can accept a wide variety of sample shapes and sizes and can be configured in many positions due to modular design. Convenient side-mounted hand wheel operation enables the user to easily and accurately test up to 200 lbF (1 kN) of force, with repeatable results. Use the ES30 with any Mark-10 force gauge and force gripping fixtures to create a complete testing solution.
Specifications
Digital travel display ESM001
6 in [150 mm] travel, 0.0005 in [0.01 mm] resolution (150 mm x 0.01), SPC output for automated data collection.
Digital travel display ESM004
Same as above, 12 in [300 mm] travel.
Column extensions Available in 6 in, 12 in, and 24 in, and custom lengths
Manual Force Test Stand ES3032-1048 REV 4
» Digital travel display
Optional Equipment
Load capacity: 200 lbF [1,000 N]
Loading method: Side-mounted hand wheel
Maximum travel: 13 in [330 mm]
Travel Rate: 0.05 in [1.27 mm] per rev.
Warranty: 3 years (see individual statement for details)
Page 1 of 2
In The Box
The ES30 test stand is shipped as shown at right, and includes the following accessories:
(1) G1024 extension rod, 2”
(1) G1028 small hook
(1) G1038 medium hook
(1) G1009 compression plate, 2” dia.
(1) G1039 coupling, #10-32F/F
(1) Allen wrench set
(1) Hand wheel
(4) Thumb screw for force gauge
(1) Resource CD
The ES30 is shown in a typical peel testing application, with Series 5 digital force gauge, digital travel display, and film & paper grips.
DellTypewritten TextES30-Stand-manual-max-1000Nm
DellRectangle
-
Data Sheet
Mark-10 Corporation n www.mark-10.com n [email protected]: 888-MARK-TEN n Tel: 631-842-9200 n Fax: 631-842-9201
Specifications subject to change without prior notice
Manual Force Test Stand ES3032-1048 REV 4 Page 2 of 2
Dimensionsin [mm]
Ordering InformationModel No. Description
ES30 Test stand, 200 lbF
ESM001 Digital travel display
ESM003-1 Column extension for ESM/ES30, 6”
ESM003-2 Column extension for ESM/ES30, 12”
ESM003-3 Column extension for ESM/ES30, 24”
DellRectangle