manual and machine
TRANSCRIPT
Manual insertion VS Auto insertion machineThe line of Auto insertion machine: Component inserter--Wave-soldering--Upper machine--Wave-soldering--Down machine--Belt line.
The line of Manual insertion: Manual assembly--Manual solder--Manual coner cut--Manual checking--Manual solder repair.
www.smthelp.com
About Manual Work
With Economic recovery,there are more and more competitors, and it become difficult to recruit workers. So, mechanization replace artificial, is the inevitable trend.
www.smthelp.com
About Productivity
Manual insert speed: 3p/s, that is 9600 pcs every 8 hours, and not include misstakes and many other reasons.
Machine insert speed: at least 10000p/h, in a word, one mahine at least instead of 8 labors, which not only improve the enficiency, but also save the time.
www.smthelp.com
About the quality
Manual: Unstability, cause of tired after do it again and again, and also influenced by our emotions.
Machine: Stability, the process is fixed and designed, reject rate and eficiency can be controled easily.
www.smthelp.com
About the cost
Manual: Lobor cost become more and more expensive, and the phenomena of talent outflow become more and more seriously.
Machine: You can recovery the cost only in one year, and it will bring you a lot more benefits, besides, it will be your fixed assets forever.
www.smthelp.com
About the cost
Manual: Lobor cost become more and more expensive, and the phenomena of talent outflow become more and more seriously.
Machine: You can recovery the cost only in one year, and it will bring you a lot more benefits, besides, it will be your fixed assets forever.
www.smthelp.com