Performance in aluminium

ADJUSTABLE STAIR instuctionsADJUSTABLE STAIR instuctionsADJUSTABLE STAIR

PROLYTE PRODUCTS GROUP © 2005Prolyte has made every effort to ensure the accuracy of this manual, no liability will be accepted for errors. Prolyte reserves the right to change or alter their products or manuals without prior notice. No part of this manual may be reproduced in any form or by any means without prior written permission. PROLYTE PRODUCTS GROUP - phone +31 (0)594 85 15 15 - fax +31 (0)594 85 15 16 - www.prolyte.com

Read this manual carefully and understand all of it’s contents before you assemble and load the Adjustable stair

Industriepark 9, 9351 PA Leek, The Netherlandsphone: +31 (0)594 85 15 15, fax: +31 (0)594 85 15 16e-mail: info@prolyte.com, website: www.prolyte.com

Industriepark 9, 9351 PA Leek, The NetherlandsIndustriepark 9, 9351 PA Leek, The NetherlandsIndustriepark 9, 9351 PA Leek, The Netherlandsphone: +31 (0)594 85 15 15, fax: +31 (0)594 85 15 16

MANUAL MANUAL MANUAL ADJUSTABLE STAIRADJUSTABLE STAIRADJUSTABLE STAIRADJUSTABLE STAIRADJUSTABLE STAIRVersion 1, July 2005

The staircase must be completed by mounting hand rails. The railing can be combined from three parts (see fi gure 5):• SM-STAIR-520 is the adjustable basic part, several parts can be coupled, to cover the • SM-STAIR-520 is the adjustable basic part, several parts can be coupled, to cover the full height of your stair.• SM-STAIR-521 is the rounded end part• SM-STAIR-522 is rectangular end part to which another railing can be coupled• SM-STAIR-522 is rectangular end part to which another railing can be coupled

875675

1558 875

641

233

368

400

1025

Figure 6SpigotSM-RAIL-ATT-01

Figure 7

Figure 5

The railing parts can only be mounted on the SM-STAIR-500 and the SM-STAIR-505 The railing parts can only be mounted on the SM-STAIR-500 and the SM-STAIR-505 The railing is mounted to the main tube using the standard spigot (SM-RAIL-ATT-01), The railing is mounted to the main tube using the standard spigot (SM-RAIL-ATT-01), which is bolted to the tube using a M12 x 200 mm bolt (see fi gure 6 and 7)..

Performance in aluminium

ADJUSTABLE STAIR instuctionsADJUSTABLE STAIR instuctionsADJUSTABLE STAIR

PROLYTE PRODUCTS GROUP © 2005Prolyte has made every effort to ensure the accuracy of this manual, no liability will be accepted for errors. Prolyte reserves the right to change or alter their products or manuals without prior notice. No part of this manual may be reproduced in any form or by any means without prior written permission. PROLYTE PRODUCTS GROUP - phone +31 (0)594 85 15 15 - fax +31 (0)594 85 15 16 - www.prolyte.com

Performance in aluminium

ADJUSTABLE STAIR instuctionsADJUSTABLE STAIR instuctionsADJUSTABLE STAIR

PROLYTE PRODUCTS GROUP © 2005Prolyte has made every effort to ensure the accuracy of this manual, no liability will be accepted for errors. Prolyte reserves the right to change or alter their products or manuals without prior notice. No part of this manual may be reproduced in any form or by any means without prior written permission. PROLYTE PRODUCTS GROUP - phone +31 (0)594 85 15 15 - fax +31 (0)594 85 15 16 - www.prolyte.com

Adjustable stairThis unique fully adjustable staircase consists of separate units, which can be combined to a staircase of any desired height between 1m minimum and 3,2m maximum height. All elements consist of four main beams of 60 x 6 mm tube to which the stair steps are connected. The stair steps are fl exible and can hinge between an angle of 45 till 60 degree.The adjustable stair is designed for a maximum loading of 500 kg/m2. Each step has a maximum pointload of 150 kg.

Two basic elements are always needed:• At the topside (see fi gure 1):

The SM-STAIR-500, the basic element with 6 steps. The upper step aligns with your stage fl oor. This basic element is connected to the stage by means of a profi le that is bolted to the stage with a T-head bolt M10 x 20 mm which is placed in the stage DEX profi le.

• At the bottom side (see fi gure 2): The SM-STAIR-510 base section, which is connected to the stair elements by means of a CCS7 coupler combined with the CCS7 hinge (CCS7-H-FM-90).

To elongate the basic element, extra step units can be mounted (see fi gure 3), these units range from 1 till 5 steps. Several units can be coupled, until the maximum allowed height of 3,2m is reached. The extra units are connected using the standard CCS7 coupling system.SM-STAIR-501, 1 STEP BEAMSM-STAIR-502, 2 STEP BEAMSM-STAIR-503, 3 STEP BEAMSM-STAIR-504, 4 STEP BEAMSM-STAIR-505, 5 STEP BEAM

Figure 1

Figure 2

Figure 3

Figure 4* The maximum allowed height is 3,2m

* *

*