Manifold Block “A”

Click on the slide to continue

Manifold Block “A” Shear ComponentsAllows Flow to Shear Cap End When Energized

Blocks Return Flow From Shear Cap End When Energized

Allows Flow to Shear Rod End When Energized

Allows Return Flow From Shear Rod End When Energized

Manifold Block “A” Die Cylinder ComponentsAllows Flow to Die Cyl Cap End When Energized

Blocks Return Flow From Die Cyl Cap End When Energized

Allows Flow to Die Cyl Rod End When Energized

Allows Return Flow From Die Cyl Rod End When Energized

Manifold Block “A” Container ComponentsAllows Flow to Container Rod End When Energized

Allows Return Flow From Container Rod End When Energized

Allows Flow to Container Cap End When Energized

Blocks Return Flow From Container Cap End When Energized

Container Opening OperationDuring container open, pump flow is directed to both the Cap end and the Rod end of the container cylinders. Since the Cap end area is twice the area of the Rod end (therefor twice the force), the cylinders extend, opening up the container.

Container Opening OperationWith H5 energized during Container opening, the rod end oil is short circuited back into the cap end. This 50% (1/2 the cap end area) additional oil causes the Container to open 1.5 times faster. This is referred to as a Regenerative Circuit.