Manfrotto Quick Release Cross ReferenceFind your Manfrotto quick release number and convert it to the Bogen part number. 

Not all Manfrotto quick releases listed are available at this time.

Manfrotto Bogen Manfrotto Bogen

030ARCH-14 3267 200PL-14 3157N

030ARCH-38 3267A 200PL-38 3157AN

030L 3297 200PLARCH-14 3157N

030UNIV 3268 200PLARCH-38 3157AN

030VHS 3159 225 3296

030-14 3049 323 3299

030-38 3048 329PL-143411 quick release click here for more info

030HAS 3048H 329PL-38 341 2

116PT 3158 click here for more info 354 3270

130-14 3041 357 3273

130-38 3042 357PLV 3272

    410PL 3271

    501PL 3433PL

    505PL 3465PL

       

 

Bogen Hexagonal Quick Release Plates Bogen 3041 Low Profile "Hexagonal" Quick release plate with 1/4 screw.

Fits Bogen tripod models 3038, 3039, 3047, 3055S, 3055, 3063, 3130, 488RC0  and other Bogen heads.  This is the same "Hexagonal" quick release plate that Bogen has been using for years, except that it does not use a thumb screw and locking collar to attach to the cameras.  Instead it uses a flat, slotted screw that must be removed using a screw driver.  Not easy to put on and take off, but it allows many cameras to lay flat on the base rather than at an angle resting on the lens.

Bogen 3049 "Hexagonal" Quick release plate with 1/4 20 screw.

Fits Bogen tripod models 3038, 3039, 3047, 3055S, 3055, 3063, 488RC0 and other Bogen heads. 

 Available in 1/4 for most 35mm and most digital cameras.  Large easy to grip thumb screw

and locking wheel make this quick release plate easy to put on and off repeatedly.

You can buy the thumb screw and locking collar only (shown left) as replacement parts that are sold separately.

 

Bogen 3048 "Hexagonal" Quick release plate with 3/8 screw.   Fits Bogen tripod models 3038, 3039, 3047, 3055S, 3055, 3063, 488RC0  and other Bogen heads.   Available in 3/8 for many larger and Hasselblad cameras.  Looks the same as above except with a 3/8 size screw.  You can buy the thumb screw and locking collar only as replacement parts that are sold separately in the pull down menu below.

Bogen 3159 "Hexagonal" Quick release plate with 1/4 screw.

Fits Bogen tripod models 3038, 3039, 3047, 3055S, 3055, 3063, 3130, 488RC0  and other Bogen heads.   Includes the VHS locator pin for video cameras that keep the camera from rotating while pointed up, down or at angles.

 

 

 

 

Bogen 3157 Quick Releases

Bogen 3157N Quick release plate with 1/4 20 screw.  Fits 3Bogen tripod models 030, 3030G, 3039, 3130, 3130G, 3262QR, 3265, 3265G, 3410, 3413QR, 3437, 390RCNAT, 390RC2, 468RC2, 484RC2, 486RC2, 488RC2, and other Bogen heads.   Available in 1/4 for most 35mm and most digital cameras.  Shown to the right.

Bogen 3157AN Quick release plate with 3/8 screw. Fits Bogen tripod models 3030, 3030G, 3039, 3130, 3130G, 3262QR, 3265, 3265G, 3410, 3413QR, 3437, 390RCNAT, 390RC2, 468RC2, 484RC2, 486RC2, 488RC2, and other Bogen heads.   Available in 3/8 for many larger and Hasselblad cameras.

Bogen 3157NR Architectural  Quick release plate with 1/4 20 screw.  Anti-twist feature assures consistent alignment of the camera on the tripod, and no rotational movement of the camera on the quick release plate.  Even in Vertical position and upside down positions.  Fits Bogen tripod models 3030, 3030G, 3039, 3130, 3130G, 3262QR, 3265, 3265G, 3410, 3413QR, 3437, 390RCNAT, 390RC2, 468RC2, 484RC2, 486RC2, 488RC2, and other Bogen heads using the 3157 style rectangular quick release plate.   Available in 1/4 for most 35mm and most digital cameras.  Shown to the right.

Bogen 3157 replacement Thumb screws Choose from either 1/4 inch or larger 3/8 size.  Use the 1/4 on most USA 35mm and digital cameras.  3/8 size is for many European and Medium Format cameras.

 

Bogen 3271 Quick Release

Bogen 3271 Quick release plate supplied with 1/4 20 thread and 3/8 screws and video anti-twist alignment pin. 

Fits Bogen tripod models 3275, 329RC4, 405, 468RC4, 488RC4, 490RC4 Bogen video heads.  

 

 

 

 

Bogen 3272 Quick ReleaseBogen 3272 Quick release plate supplied with two each of the 1/4 20 thread and 3/8 screws and video anti-twist alignment pin.  Designed to slide back and forth on head for perfect set up.  Fits Bogen tripod models 3421, 3273, 3274, 3147, 3147-10,  510, 510-10, 516 Bogen professional video heads.  Looks similar to the 3444PL plate, but is longer. 

Dimensions are: 5 1/2 inches long X 2 3/16 inches wide X 3/16 inch thick                                  140mm long X 55mm wide X 10mm thick

Click on picture to see quick release at about life size.

 

Bogen 3433PL  Quick release

Bogen 3433PL Quick release plate with 1/4 20 thread and 3/8 screws and video anti-twist alignment pin. 

Cast aluminum plate with rubber gripper pads.

 

Fits Bogen tripod models 3433 and 501 Bogen video heads.  

 

 

Bogen 384 Quick ReleaseBogen 384 Quick release plate supplied with 1/4 20 screws and video anti-twist alignment pin.  Fits 384 Bogen heads.  

 

 

Bogen 384 Quick release plate supplied with 1/4 20 threaded screw and anti-twist alignment brace for almost any 35mm or digital.  Fits 384 Bogen  heads.

 

  

 

Bogen 3299 Quick Release Plate AdapterQuickly and easily adapt almost any tripod to a quick release model.  The adapter screws into the 1/4 -20 screw on most tripods.  Use the standard Bogen 3157N Quick Release Plate on your camera, video camera, digital camera, binoculars or other devices.  Large thumb release and secondary brass safety catch make this unit the best, most secure on the market.  Purchase additional quick release plates below.