MANAGING KEYPADS

2014 v1.02014 v1.0

Manage Keypads

2

Participants may use their keyboards by selecting and clicking on their desired cell (1-9) or by using the wireless keypads provided by the facilitator. To provide insights using keypads, the hardware drivers must be installed and the USB receiver must be connected to your computer via the USB port

Participants may use their keyboards by selecting and clicking on their desired cell (1-9) or by using the wireless keypads provided by the facilitator. To provide insights using keypads, the hardware drivers must be installed and the USB receiver must be connected to your computer via the USB port

Manage Keypads – Install Hardware

3

Installing the hardware: Plug in the ResponseCard USB receiver to your local

computer (located in the keypad box/bag). Windows will initiate the Add Hardware Wizard. When

prompted to specify the location of the Keypad Drivers, point to the temporary folder that contains the drivers and click OK.

The Add Hardware Wizard will locate the driver files and complete the installation.

After installing the drivers, open DL3 and launch a Decision Meeting

NOTE: Both Windows 7 and Mac OS X and later should automatically find an appropriate driver for the USB receiver.

Assigning Keypads

4

Under the MANAGE KEYPADS tab, assign keypads to each participant manually by number, enter the desired keypad number next to the participant’s name. Otherwise, the system will assign the keypads automatically by clicking Assign All Automatically

Under the MANAGE KEYPADS tab, assign keypads to each participant manually by number, enter the desired keypad number next to the participant’s name. Otherwise, the system will assign the keypads automatically by clicking Assign All Automatically

1

1

Launching Keypads

5

Click This will establish the connection with the keypads and will initiate the download and opening of the Java Keypad Client

Click This will establish the connection with the keypads and will initiate the download and opening of the Java Keypad Client

1Select Open with Java Web Start Launcher, click OKSelect Open with Java Web Start Launcher, click OK2

2

1

Launching Keypads cont.

6

When the program opens you will see the following keypad client window. Voting may beginWhen the program opens you will see the following keypad client window. Voting may begin

NOTE: You must keep the keypad client open when voting. If you close the keypad client or are is connected from Decision Lens while you are voting, close the keypad client window and repeat these instructions to launch the keypad client.

NOTE: You must keep the keypad client open when voting. If you close the keypad client or are is connected from Decision Lens while you are voting, close the keypad client window and repeat these instructions to launch the keypad client.

Decision NameDecision Name

Indicates voting receiver is attachedIndicates voting receiver is attached

Learn more atDLU.decisionlens.com