man cor purification canadian product catalogue · published 7/2010 our history mar cor...

Filtration, Water, and Disinfection Technologies

Product Catalogue1st Edition

Published 7/2010

Our History

Mar Cor Purification, owned by Cantel Medical Corp., is a business that consists of several fa-

miliar companies integrated to offer filtration, water and disinfection technologies, namely:

Minntech Filtration Technologies Group, Mar Cor Services, Biolab Equipment, Fluid Solu-

tions and GE Medical Water.

This combination allows us to better serve our medical & industrial customers by

supplying high-quality water treatment equipment with our Mar Cor, GE Medical &

Biolab line of products, while providing proven filtration and disinfection technolo-

gies through our FiberFlo® Filters and Minncare® & Actril Cold Sterilant brands.

Our Segments

The Medical Water Purification Group has been serving the water purification mar-

ketplace for over 35 years and has over 3500 installations and over 4000 single pa-

tient systems in North America in demanding applications in dialysis clinics, hospi-

tals & medical research centers.

The Industrial Water Purification Group has been serving the water purification market-

place for over 30 years and has over 1000 installations in North America in demanding

applications in pharmaceutical/biotech, food & beverage, and electronics.

The BioScience Products Group has been providing hollow fiber membrane filters, cold sterilant disinfectants and dry

fog products for over 20 years. These are used in many medical and industrial customers as a key component of main-

taining a high quality filtration & disinfection environment.

-

Our Success

The success of Mar Cor, as well as the success of our customers, has been based on the principle of providing

Competent, Consistent & Compliant product and services. We welcome the opportunity to meet your toughest

demands while continuing to provide outstanding customer service.

Our Service Center LocationsAtlanta, GA

Birmingham, AL

Boston, MA

Burlington, ON

Chicago, IL

Cleveland, OH

Dallas, TX

Detroit, MI

Minneapolis, MN

Montreal, QC

Nashville, TN

New York, NY

Orlando, FL

Philadelphia, PA

Raleigh/Durham, NC

Seattle, WA

San Antonio, TX

Washington, DC

Mar Cor Purification3250 Harvester Road - Unit 6Burlington, ON L7N 3W9CanadaTel: (905) 639-7025Toll Free: (800) 268-5035Fax: (905) 639-0425

1www.mcpur.com / 800-268-5035 / 800-268-0032 (Quebec)

To Place an Orderchoose the most convenient

way for you.

For orders in Canada:

OPTiON 1

FAX: Send a fax it to us any time at

905-639-0425 / 514-636-8429 (Quebec).

Our fax machine is on 24 hours a day, 7

days a week.

OPTiON 2

CALL: Pick up the telephone and call

1-800-268-5035 / 1-800-268-0032

(Quebec) and speak with one of our

helpful customer assistants.

OPTiON 3

EMAiL: email you order to orderdesk@

mcpur.com.

For all international orders:Please contact us at 905-639-7025

Be sure to visit us on-line at

www.mcpur.com

We are here to serve you. Thank you for choosing Mar Cor Purification.

Mar Cor Purification14550 28th Avenue NorthPlymouth, MN 55447U.S.A.Tel: (484) 991-0220 Toll Free: (800) 633-3080Fax: (763) 210-3868

Mar Cor Purification4450 Township Line RoadSkippack, PA 19474-1429U.S.A.Tel: (484) 991-0220Toll Free: (800) 346-0365Fax: (484) 991-0230

FiLTERS & MEMBRANES

Page 35PROCESS PiPiNg & FiTTiNgS

Page 41vALvES

Page 49PUMPS

CONdiTiONiNg EQUiPMENT Page 53

WAT E R P U R i F i C AT i O N EQUiPMENT Page 65

CLEANERS & diSiNFECTANTS Page 83

PROCESS CONTROLS Page 89

STORAgE TANkS & ACCESSORiES Page 97

Page 107PROdUCT iNdEX

Mar Cor Purification 85 Avenue Lindsaydorval, Quebec H9P 2S6CanadaTel: (514) 636-0032Toll Free: (800) 268-0032Fax: (514) 636-8429

3

Filters & MeMbranes

Filters & MeMbranes

FiL

TE

RS

& M

EM

BR

AN

ES

4 800-268-5035 / 800-268-0032 (Quebec) / www.mcpur.com / MAR COR PURiFiCATiON

Filt

rati

on M

atri

x

FiL

TE

RS

& M

EM

BR

AN

ES

Note: These standards reflect currently published public information and are current at the time of publication.

AMERiCAN SOCiETY FOR TESTiNg ANd MATERiALS Standard Specifications for Reagent Water ASTM Type i ii iii iv Conductivity @ 25ºC (micromhos/cm) 0.056 1.0 0.25 5.0 Resistivity @ 25ºC (Megohms-cm) 18 1.0 4.0 0.2 Total Silica (µg/L) 3 3 500 — Total Organic Carbon (µg/L) 100 50 200 — Chlorides (µg/L) 1 5 10 50 Sodium (µg/L) 1 5 10 50 pH* — — — 5.0-8.0 Type A Type B Type C Max Heterotropic Bacteria Count 10/1000 mL 10/100 mL 100/10 mL endotoxin, eU/mL < 0.03 0.25 N/a

* The measurement of pH in Type I, II, and III reagent water has been eliminated because these grades of water do not contain constituents in sufficient quantity to alter pH.

5

FiL

TE

RS

& M

EM

BR

AN

ES

MAR COR PURiFiCATiON / www.mcpur.com / 800-268-5035 / 800-268-0032 (Quebec)

COLLEgE OF AMERiCAN PATHOLOgiSTS NATiONAL COMMiTTEE FOR CLiNiCAL LABORATORY STANdARdS

Standard Specification for Reagent Water CAP/NCCLS Type i ii iii Conductivity @ 25°C 0.1 1.0 10 (micromhos/cm) Resistivity @ 25°C 10 1.0 0.1 (megohms-cm) Silicate (mg/L SiO2) 0.05 0.1 1.0 pH — — 5.0- 8.0 Bacterial growth (cfu/mL) 10a 1000 — Particulate Matter 0.22 µm Filterb N/a N/a Organics activated Carbonb N/a N/a

aPreferably, Type I water should be bacteria free.bThese specifications are process specifications and are not measured by the end-user.

Water Quality Standards

PHARMACEUTiCAL PHARMACOPEiA WATER STANdARdS Purified Water WFI (and Highly Purified) USP Ph eur USP Ph eur Conductivity <1.3 µS/cma <4.3 µS/cm <1.3 µS/cma <1.1 µS/cm temp dependent temp dependent temp dependent temp dependent Bacteria <100 cfu/ml <100 cfu/ml <10 cfu/100 ml <10 cfu/100 ml endotoxin <0.25 IU / mlc <0.25 eU / ml <0.25 IU / ml TOC <0.5 mg/l <0.5 mg/l <0.5 mg/lb

Nitrates <0.2 ppm <0.2 ppm Heavy Metals <0.1 ppm <0.1 ppm aluminum <10 µg/mlc <10 µg/mlc

USP = United States Pharmacopeia Ph Eur = European Pharmacopeiaa Offline conductivity measurements possible. b Or pass oxidizable substances test.c Only for use in dialysis solutions.

Canadian StandardS aSSoCiation (CSa)

Z364.2.2-03 Water Treatment Equipment and Water Quality Requirements for Hemodialysis

Product Water Quality -– Physiological Solutesa

Solute Maximum Concentration Levelmg/L mmol/L

Calcium 2 0.05Magnesium 4 0.16Potassium 8 0.2Sodium 70 3Note a: The above maximum levels are recommended where specific, continuous monitoring for these solutes does not exist. Chlorine ion (CL) is most likely to be the counter ion for the above solutions.

Product Water Quality -– Non-Physiological SolutesMaximum Concentration Level

Solute mg/Laluminum 0.01antimony 0.006arsenic 0.005Barium 0.1Beryllium 0.0004Cadmium 0.001Chloramines 0.1Chlorineb 0.5Chromium 0.014Copper 0.1Cyanide 0.02Fluoride 0.2Lead 0.005Mercury 0.0002Nitrate (Nitrogen) 2Selenium 0.09Silver 0.005Sulphate 100Thallium 0.002Total Organic Carbon (TOC) 0.5Zinc 0.1b Total chlorine levels are measured exclusive of chlorine ions.

Note: 0.1 mg/L total chlorine meets the requirements for both chlorine and chloramine.

Water Bacteriology/EndotoxinsProduct water shall meet the following requirements:

a) The viable microbial count shall not exceed 100 CFU/mL, with an action level at 50 CFU / mL; andb) The endotoxin concentration does not exceed 2 eU/mL, with an action level at 1 eU/mL.

The physician in charge of dialysis is responsible for monitoring the microbial count and endotoxin concentration of the product water. If action levels exceeding the set levels are observed in the product water, corrective measures, such as disinfection and retesting is required to reduce the levels to an acceptable range.

COMMONLY USEd CONvERSiONSFOR PURE WATER

Volume 1 U.S. gallon (gal) = 231 Cubic Inches (in3) 1 U.S. gallon (gal) = 3.785 Liters (l) 1 Cubic Foot (ft3) = 7.48 U.S. gallons (gal) 1 Cubic Foot (ft3) = 1728 Cubic Inches (in3) 1 Cubic Meter (m3) = 35.3 Cubic Feet (ft3) 1 U.S. Ounce (oz) = 29.57 Milliliters (ml)

density 1 U.S. gallon (gal) = 8.33 Lb. Water 1 Cubic Foot (ft3) = 62.3 Lb. Water

temperature absolute Temperature °F = (°C x 9/5) + 32 °K = °C + 273 °C = (°F - 32) x 5/9 °R = °F + 460

Mass 1 Lb = 453.6 grams (g.) = 0.4536 Kilograms (Kg) 1 Lb = 7000 grains (gr.) 1 Kg = 2.205 lb.

Pressure 1 atmosphere = 14.7 (psi) 1 atmosphere = 101.325 Kilo Pascal (KPa) psia (absolute) = psig (gauge) + 14.7 14.7 psi = 29.92 Inches Hg 9.92 In. Hg = 33.83 Ft. H2O 1 Kg/cm2 = 14.223 psi 1 K Pa = 0.145 psi

total dissolved Solids Concentration 1 grains Per gallon (gr/gal) = 17.1 Parts Per Million (ppm) 1 grains Per gallon as NaCl = 0.85 grains Per gallon as CaCO3 1 Part Per Million (ppm) = 1 Milligram Per Liter (mg/l) 1 ppm as NaCl = 0.85 ppm as CaCO3 1 ppm = 1,000 Parts Per Billion (ppb) = 1,000,000 Parts Per Trillion (ppt) 1 ppb = 1 Microgram Per Liter (µg/l)

resistivity/Conductivity ohm-cm = 1 = 1 mho/cm Siemens/cm megohm-cm = 1,000,000 ohms megohm-cm = 1 = 1

micromhos/cm microSiemens/cm

ion Exchange Capacity Cartridge grain Capacity = gallons Processed Total Dissolved Solids (grains/gal) Cartridge grain Capacity x 17.1 = gallons Processed Total Dissolved Solids (ppm) Cartridge grain Capacity x 64.7 = Liters Processed Total Dissolved Solids (ppm)

6

FiL

TE

RS

& M

EM

BR

AN

ES

800-268-5035 / 800-268-0032 (Quebec) / www.mcpur.com / MAR COR PURiFiCATiON

WATER QUALiTYCONvERSiON CHART

Total Conductivity dissolved grains Per Resistivity (RO) Solids (TdS) gallon (di) Microsiemens/cm PPM (gPg) ohms/cm Micromhos/cm as CaCO3 as CaCO3

18,000,000 0.05 0.028 0.001 10,000,000 0.1 0.04 0.002 5,000,000 0.2 0.13 0.007 2,000,000 0.5 0.25 0.014 1,000,000 1 0.5 0.03 500,000 2 1 0.06 250,000 4 2 0.12 100,000 10 5 0.29 50,000 20 10 0.58 25,000 40 20 1.17 10,000 100 50 2.92 9,000 111.1 56 3.27 8,000 125 63 3.68 7,000 142.9 72 4.21 6,000 166.7 83 4.85 5,500 181.8 91 5.3 5,000 200 100 5.8 4,500 222.2 111 6.5 4,000 250 125 7.3 3,500 285.7 143 8.4 3,000 333.3 166 9.8 2,500 400 200 11.7 2,000 500 250 14.6 1,500 666.6 333 19.5 1,400 714.2 357 20.9 1,200 833.3 416 24.3 1,000 1,000 500 29.2 800 1,250 625 36.5 600 1,666 833 48.7 500 2,000 1,000 58.5 400 2,500 1,250 73.1 300 3,333 1,667 97.5 200 5,000 2,500 146.2 100 10,000 5,000 292.4

DI = Deionization RO = Reverse Osmosis

Water Quality Standards

7

FiL

TE

RS

& M

EM

BR

AN

ES


The FiberFlo Microfiber cartridge filters offer increased dirt holding capacity, long service life, low initial pressure drops, maximum throughput and comprehensive selection of pore sizes. The unique manufacturing process gives them superior structure. The polypropylene microfiber is suitable for potable water filtration, food processing applications, along with a variety of industrial chemicals.

Features• Greater void volume than resin bonded or wound cartridge.• Homogeneous high purity media. Fibers free of residual extrusion oils,

surfactants, antistatic agents and resin binders.• Fibers thermally bonded — dimensionally stable filter media.• Stratified pore structure allows separation of solids along a size gradient.• Hydrophobic media.• High efficiency media.• Easily ground into powder or incinerated.

Benefits• Increased dirt holding capacity. Longer service life. Lower initial pressure drop.• Meets FDA requirements for food contact. Will not cause foaming in process stream.• Reduced fiber migration. Micron rating not altered as differential pressure increases. Rigid,

highly porous cartridge does not require a support core.• Results in particle entrapment throughout depth of media reducing surface blinding and increasing dirt holding capacity.• Filter will absorb undissolved and non-emulsified oil out of liquid, air or gas streams.• Will filter out large percentage of contaminant on a single pass. Nor dependent on the filter “cake” to improve particle retention.• Reduced waste volume.

FiberFlo™ depth Cartridge Filters MiCROFiBER

SpecificationsMicron Ratings1, 3, 5, 10, 25, 50, 75, 100, and 150.

Lengths (in inches)9-3/4, 10, 20, 30, and 40.

differential PressureMaximum: 50 PSIgRecommended Change Out: 10-15 PSIgInitial: 1-3 PSIg

Operating TemperatureMaximum Continuous: 200°F.

O-Ring or Flat gasket MaterialSilicone, Viton, Buna-N, eRR, Neoprene

Compliance of polypropylene Microfiber CartridgesPolypropylene microfiber media, using a base homopoylmer resin, is in compliance with the appropriate guidelines outlined by the U.S. Food and Drug administration. Meets FDa requirement outlined in the CRF, Title 21, Section 177.1520 (a), (1) and Section 177.1520 (c), (1.1).

Cartridges with and without end caps are certified by the NSF International under aNSI/NSF Standard 42 for replacement parts.Cartridges meet the requirement of the USP Class VI plastics test as demon-strated by USP Biological Reactivity Tests, In Vivo.

WATER FLOW RATE @25 C (gpm)

0 1 2 3 4 5 6

100 µm75 µm50 µm

25 µm

10 µm

5 µm

1 µm

0.45

0.4

0.35

0.3

0.25

0.2

0.15

0.1

0.05

0

PRES

SUR

E D

RO

P (p

sid

)

TYPiCAL WATER FLOW RATEper 10-inch (25 cm) micro-fiber cartridge -X no end caps

WATER FLOW RATE @25 C (gpm)

0 1 2 3 4 5 6100 µm

75 µm50 µm25 µm

10 µm

5 µm

1 µm

6

5

4

3

2

1

0

PRES

SUR

E D

RO

P (p

sid

)

TYPiCAL WATER FLOW RATEper 10-inch (25 cm) micro-fiber cartridge with end caps

eND-FITTINg OPTIONS

Codes Description Std Reference A SOe-222 O-ring/Solid end Cap Code 3 B SOe-222 O-ring/Fin Code 4 C SOe-226 O-ring/Fin Code 5 d DOe-Flat gasket / Flat gasket Code DOe X DOe — Standard X Model (No end caps)

8

FiL

TE

RS

& M

EM

BR

AN

ES


FILTERS ARE SOLD AND SHIPPED IN CASE QUANTITIES UNLESS INFORMED OTHERWISE.


eND-FITTINg OPTIONS

Codes Description Std Reference A SOe-222 O-ring/Solid end Cap Code 3 B SOe-222 O-ring/Fin Code 4 C SOe-226 O-ring/Fin Code 5 d DOe-Flat gasket / Flat gasket Code DOe X DOe — Standard X Model (No end caps)

F IBeRFLO MICROFIBeR F ILTeRS(NO eND CaPS)

MOdEL MiCRON LENgTH QUANTiTY NUMBER RATiNg (iN.) PER CASE

1 Micron Microfiber Filter - Standard double open EndFM-001-975-X 1 9.75 30FM-001-10-X 1 10 30FM-001-20-X 1 20 15FM-001-30-X 1 30 15FM-001-40-X 1 40 15

3 Micron Microfiber Filter - Standard double open End

FM-003-975-X 3 9.75 30

FM-003-10-X 3 10 30FM-003-20-X 3 20 15FM-003-30-X 3 30 15FM-003-40-X 3 40 15

5 Micron Microfiber Filter - Standard double open EndFM-005-975-X 5 9.75 30FM-005-10-X 5 10 30FM-005-20-X 5 20 15FM-005-30-X 5 30 15FM-005-40-X 5 40 15

10 Micron Microfiber Filter - Standard double open EndFM-010-10-X 10 10 30FM-010-20-X 10 20 15FM-010-30-X 10 30 15FM-010-40-X 10 40 15






9

FiL

TE

RS

& M

EM

BR

AN

ES


FILTERS ARE SOLD AND SHIPPED IN CASE QUANTITIES UNLESS INFORMED OTHERWISE.

eND-FITTINg OPTIONS

Codes Description Std Reference A Single Open-end, 222 o-ring, flat bottom Code 3 B Single Open-end, 222 o-ring, with fin Code 4 C Single Open-end, 226 o-ring, with fin Code 5 d Double Open-end, flat gasket Code DOe


FIBeRFLO MICROFIBeR F ILTeRS( WITH eND CaPS)

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

QUANTiTYPER CASE

1 Micron Microfiber FilterFM-001-10-a 1 10 30FM-001-20-a 1 20 15FM-001-30-a 1 30 15FM-001-40-a 1 40 15

FM-001-10-B 1 10 30FM-001-20-B 1 20 15FM-001-30-B 1 30 15FM-001-40-B 1 40 15

FM-001-10-C 1 10 30FM-001-20-C 1 20 15FM-001-30-C 1 30 15FM-001-40-C 1 40 15

FM-001-10-D 1 10 30FM-001-20-D 1 20 15FM-001-30-D 1 30 15FM-001-40-D 1 40 15


FM-003-10-B 3 10 30FM-003-20-B 3 20 15FM-003-30-B 3 30 15FM-003-40-B 3 40 15

FM-003-10-C 3 10 30FM-003-20-C 3 20 15FM-003-30-C 3 30 15FM-003-40-C 3 40 15

FM-003-10-D 3 10 30FM-003-20-D 3 20 15FM-003-30-D 3 30 15FM-003-40-D 3 40 15


FM-005-10-B 5 10 30FM-005-20-B 5 20 15FM-005-30-B 5 30 15FM-005-40-B 5 40 15

FM-005-10-C 5 10 30FM-005-20-C 5 20 15FM-005-30-C 5 30 15FM-005-40-C 5 40 15

FM-005-10-D 5 10 30FM-005-20-D 5 20 15FM-005-30-D 5 30 15FM-005-40-D 5 40 15

continued next column

FIBeRFLO MICROFIBeR F ILTeRS( WITH eND CaPS)

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

QUANTiTYPER CASE


FM-010-10-B 10 10 30FM-010-20-B 10 20 15FM-010-30-B 10 30 15FM-010-40-B 10 40 15

FM-010-10-C 10 10 30FM-010-20-C 10 20 15FM-010-30-C 10 30 15FM-010-40-C 10 40 15

FM-010-10-D 10 10 30FM-010-20-D 10 20 15FM-010-30-D 10 30 15FM-010-40-D 10 40 15


FM-025-10-B 25 10 30FM-025-20-B 25 20 15FM-025-30-B 25 30 15FM-025-40-B 25 40 15

FM-025-10-C 25 10 30FM-025-20-C 25 20 15FM-025-30-C 25 30 15FM-025-40-C 25 40 15

FM-025-10-D 25 10 30FM-025-20-D 25 20 15FM-025-30-D 25 30 15FM-025-40-D 25 40 15

10

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ depth Cartridge Filters MiCROFiBER - HigH PERFORMANCE

The FiberFlo FMHP Microfiber Filter Cartridges are highly porous prefilters with a graded pore structure. Particles are captured throughout the depth of the polypropylene media. The course filtration layers on the outside of the filter are designed to entrap larger particulates without prematurely binding the filter medium. High efficiency fine particle retention takes place in the absolute filtration layers located near the core. This unique design results in a high capacity for dirt loading, low pressure drops, high flow rates and long service life.

With high performance filtration down to 1 micron, FMHP cartridges are ideal for high purity applications in the pharmaceutical, biotech, medical, dialysis, food and beverage, and other industries desiring high performance filtration.

FiberFlo FMHP cartridges are composed of continuous length polypropylene microfibers that are thermally bonded to each other with no bonding resins or adhesives. The microfibers surround a polypropylene core that gives the FMHP filters exceptional strength. The FMHP cartridges are highly resistant to collapse, channeling, and bypass which can result from high differential pressures, pulsating flow, or pressure surges.

Features• Thermally bonded microfibers formed into a highly porous and

rigid seamless tube with fixed-size pores.• 100% polypropylene microfiber construction for exceptional

cleanliness, low total organic carbon (TOC) content and a fast rinse-up in 18 megohm D.I. water for applications with stringent cleanliness requirements.

• No foaming because pure polypropylene microfibers have no extrusion oils, surfactants or antistatic chemicals.

• The FMHP cartridges are extremely resistant to collapse, channeling and bypass. The filter medium will not compress and unload trapped contaminants.

• The hydrophobic surfaces absorb oil from air, gas and aqueous streams.

• FMHP cartridges meet FDA regulations for food contact under the Code of Federal Regulations, title 21, section 177.1520.

• Available with a variety of end fittings and sealing options (SOE/DOe) and O-ring or flat gaskets, for bypass-free filtration.

SpecificationsStandard Cartridge Dimensions:

Available in nominal lengths of 10, 20, 30 and 40”, 2.5” outside diameter.

Micron Ratings: 1, 3, 5, 10, 25.

Suggested Differential Pressures: 35 PSIg Maximum 15 PSIg Optimum Change-Out Pressure Drop

Operating Temperature: 200°F max. Continuous

WATER FLOW RATE (gpm)

1 2 3 4 5 6 7 8 9 10

1 µm3 µm5 µm

18 µm

25 µm

12

10

8

6

4

2

0

DEL

TA P

(p

sid

)

FMHP WATER FLOW vS. PRESSURE dROP

eND-FITTINg OPTIONS

Codes Description Std Reference A Single Open-end, 222 o-ring, flat bottom Code 3 B Single Open-end, 222 o-ring, with fin Code 4 C Single Open-end, 226 o-ring, with fin Code 5 d Double Open-end, flat gasket Code DOe

FIBeRFLO HIgH PeRFORMaNCe FILTeR( WITH eND CaPS)

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

QUANTiTYPER CASE

10 Micron High Performance Microfiber FilterFMHP-010-10-a 10 10 30FMHP-010-20-a 10 20 15FMHP-010-30-a 10 30 15FMHP-010-40-a 10 40 15

FMHP-010-10-B 10 10 30FMHP-010-20-B 10 20 15FMHP-010-30-B 10 30 15FMHP-010-40-B 10 40 15

FMHP-010-10-C 10 10 30FMHP-010-20-C 10 20 15FMHP-010-30-C 10 30 15FMHP-010-40-C 10 40 15

FMHP-010-10-D 10 10 30FMHP-010-20-D 10 20 15FMHP-010-30-D 10 30 15FMHP-010-40-D 10 40 15





FIBeRFLO HIgH PeRFORMaNCe FILTeR( WITH eND CaPS)

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

QUANTiTYPER CASE














11

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ depth Cartridge Filters MiCROFiBER - HigH PERFORMANCE

FILTERS ARE SOLD AND SHIPPED IN CASE QUANTITIES.

Carbon Block Filters

12

FiL

TE

RS

& M

EM

BR

AN

ES


MATRikX® EXTRUdEd CARBON FiLTERSMaTRIKX® extruded Carbon Filters are available finished with pre-filtration wrap, end caps and gaskets. Because MaTRIKX® filters are produced by continuous extrusion, they can be manufactured to any commercially required length. a wide range of standard and custom diameters and lengths are available to fit almost any commercial filter housing.

all MaTRIKX® extruded Carbon Filters are manufactured using FDa-compliant materials. Specific models are designed to meet NSF/aNSI Standards 42 and 53. extruded carbon filter elements can be used in potable water applications, as well as for industrial, food service and commercial applications.

Features & Benefits

• No release of carbon fines:• No channeling, fluidizing, or bypassing:• Low pressure drop:• Low binder content and high dirt capacity:• “Blowout” of GAC is eliminated with extruded carbon filter elements • Extruded carbon’s cost/performance ratio “the best in the industry”• Composite particles

MaTRIKX eX TRUDeD CaRBON FILTeRSPART O.d. CHLORiNE TASTE & OdOR NOMiNAL / ABSOLUTE iNiTiAL

CNUMBER x LENgTH REdUCTiON CAPACiTY @ FLOW MiCRON RATiNg ΔP @ FLOW

kX Matrikx ® + 1 Carbon Block Filters - "Chlorine Taste & Odor guzzler"01-250-125-975 2.50" x 9.75” >20,000 gal @ 1.0 gPM 0.6 µm / 2 µm 3.5 psid @ 1.0 gPM01-250-125-20 2.50" x 20” >45,000 gal @ 2.3 gPM 0.6 µm / 2 µm 3.0 psid @ 2.0 gPM

01-425-125-975 4.25" x 9.75” >70,000 gal @ 3.0 gPM 0.6 µm / 2 µm 9.0 psid @ 2.0 gPM01-425-125-20 4.25" x 20” >150,000 gal @ 7.0 gPM 0.6 µm / 2 µm 8.5 psid @ 4.0 gPM

kX Matrikx ® + 5 Carbon Block Filters - "A Sweeter Taste"02-250-125-975 2.50" x 9.75” >6,000 gal @ 1.0 gPM 2 µm / 5 µm 2.5 psid @ 1.0 gPM02-250-125-20 2.50" x 20” >15,000 gal @ 2.3 gPM 2 µm / 5 µm 2.5 psid @ 2.0 gPM

02-425-125-975 4.25" x 9.75” >20,000 gal @ 3.0 gPM 2 µm / 5 µm 4.5 psid @ 3.0 gPM02-425-125-20 4.25" x 20” >42,000 gal @ 7.0 gPM 2 µm / 5 µm 5.5 psid @ 7.0 gPM

kX Matrikx ® + CR1 Carbon Block Filters - "Cyst Reduction Water Filter"19-250-125-975 2.50" x 9.75” >10,000 gal @ 2.5 gPM 0.5 µm / 1 µm 1.0 psid @ 1.0 gPM19-250-125-20 2.50" x 20” >20,000 gal @ 5.0 gPM 0.5 µm / 1 µm 1.0 psid @ 2.0 gPM

kX Matrikx ® + CTO®/2 Carbon Block Filters - "The Workhorse"32-250-125-975 2.50" x 9.75” >6,000 gal @ 1.0 gPM 5 µm / 10 µm 2.0 psid @ 1.0 gPM32-250-125-20 2.50" x 20” >12,000 gal @ 2.0 gPM 5 µm / 10 µm 2.0 psid @ 2.0 gPM

32-425-125-975 4.25" x 9.75” >12,000 gal @ 3.0 gPM 5 µm / 10 µm 4.0 psid @ 3.5 gPM32-425-125-20 4.25" x 20” >26,000 gal @ 7.0 gPM 5 µm / 10 µm 4.5 psid @ 7.0 gPM

kX Matrikx ® + PB1 Carbon Block Filters - "The Premier Performer"06-250-125-975 2.50" x 9.75” >6,000 gal @ 0.75 gPM 0.5 µm / 1 µm 10.0 psid @ 0.75 gPM06-250-125-20 2.5” x 20” >12,000 gal @ 1.50 gPM 0.5 µm / 1 µm 10.0 psid @ 1.5 gPM

06-425-200-975 4.25" x 9.75” >20,000 gal @ 2.50 gPM 0.5 µm / 1 µm 7.0 psid @ 2.5 gPM06-425-200-20 4.25" x 20” >42,000 gal @ 5.00 gPM 0.5 µm / 1 µm 6.5 psid @ 5.0 gPM

13

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ Pleated Cartridge Filters

The FiberFlo Polypropylene depth cartridge filters offer increased dirt holding capacity, long service life, stratified pore structure, homogenous high purity media, and are manufactured using rigorous quality standards. The polypropylene pleated filter is suitable for general water filtration, chemical filtration, and Reverse Osmosis (RO) and Deionization (DI) feedwater filtration.

Features• High surface area.• Homogeneous high purity media. Fibers free of residual extrusion oils,

surfactants, antistatic agents and resin binders.• Stratified pore structure allows separation of solids along a size gradient.• Rigorous quality standards for polypropylene selected.

Benefits• Increased dirt holding capacity. Longer service life.• Meets FDA requirements for food contact.• Results in particle entrapment throughout depth of media reducing

surface blinding and increasing dirt holding capacity.• Exhibits very low protein binding characteristics. Meets USP Class VI

Plastics Tests as well as tests for cytoxicity, hemolysis and pyrogenicity.

SpecificationsFilter Media: Pleated Polypropylene Depth MediaMembrane Support, Core Tube, Sleeve, end Caps: PolypropyleneO-Ring: SiliconeO-Ring Colour: RedMax. Differential Pressure at 68°F (20°C): 50 PSIgOperating Temperature: Maximum 175°F (75°C)Max. Recommended Flow Rate: 5 GPM per 10” Section

Cartridge dimensionsNominal Length* Filtration area10 inch 5 ft2 / 0.5 m2

20 inch 11 ft2 / 1.0 m2

30 inch 16 ft2 / 1.5 m2

40 inch 22 ft2 / 2.0 m2

*Actual overall length of cartridge will vary depending on configuration. Cartridge performance is as specified regardless of configuration.

Outside diameter2.75 in / 7 cm

Micron Ratings0.2, 0.4, 1.0, 3.0, 5.0, 10, 30, 60

POLYPROPYLENE


0 1 2 3 4 5 6 7 8

10 µm, 30 µm, 60 µm

3 µm, 5 µm

1 µm

0.4 µm

0.2 µm

3

2

1

0

DIF

FER

ENTI

AL

PRES

SUR

E (p

sid

)

TYPiCAL WATER FLOW RATEper 10-inch (25 cm) FiberFlo pleated cartridge

eND-FITTINg/SeaLINg OPTIONS

Codes Description Std Reference A SOe-222 O-ring/Flat Bottom Code 3 B SOe-222 O-ring/Fin Code 4 C SOe-226 O-ring/Fin Code 5 d DOe-Flat gasket / Flat gasket Code DOe E SOe - 213 O-ring Internal / Flat end ametek

14

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ Pleated Cartridge Filters POLYPROPYLENE

FILTERS ARE SOLD AND SHIPPED IN CASE QUANTITIES, unless informed otherwise.

FIBeRFLO POLYPROPYLeNePLeaTeD FILTeRS

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

QUANTiTYPER CASE

0.2 Micron Polypropylene Pleated FilterFP-02-10-a 0.2 10 12FP-02-20-a 0.2 20 12FP-02-30-a 0.2 30 12FP-02-40-a 0.2 40 12

FP-02-10-B 0.2 10 12FP-02-20-B 0.2 20 12FP-02-30-B 0.2 30 12FP-02-40-B 0.2 40 12

FP-02-10-C 0.2 10 12FP-02-20-C 0.2 20 12FP-02-30-C 0.2 30 12FP-02-40-C 0.2 40 12

FP-02-10-D 0.2 10 12FP-02-20-D 0.2 20 12FP-02-30-D 0.2 30 12FP-02-40-D 0.2 40 12

FP-02-10-e 0.2 10 12FP-02-20-e 0.2 20 12

0.4 Micron Polypropylene Pleated FilterFP-04-10-a 0.4 10 12FP-04-20-a 0.4 20 12FP-04-30-a 0.4 30 12FP-04-40-a 0.4 40 12

FP-04-10-B 0.4 10 12FP-04-20-B 0.4 20 12FP-04-30-B 0.4 30 12FP-04-40-B 0.4 40 12

FP-04-10-C 0.4 10 12FP-04-20-C 0.4 20 12FP-04-30-C 0.4 30 12FP-04-40-C 0.4 40 12

FP-04-10-D 0.4 10 12FP-04-20-D 0.4 20 12FP-04-30-D 0.4 30 12FP-04-40-D 0.4 40 12

FP-04-10-e 0.4 10 12FP-04-20-e 0.4 20 12

FIBeRFLO POLYPROPYLeNePLeaTeD FILTeRS cont inued

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

QUANTiTYPER CASE

1.0 Micron Polypropylene Pleated FilterFP-1-10-a 1 10 12FP-1-20-a 1 20 12FP-1-30-a 1 30 12FP-1-40-a 1 40 12

FP-1-10-B 1 10 12FP-1-20-B 1 20 12FP-1-30-B 1 30 12FP-1-40-B 1 40 12

FP-1-10-C 1 10 12FP-1-20-C 1 20 12FP-1-30-C 1 30 12FP-1-40-C 1 40 12

FP-1-10-D 1 10 12FP-1-20-D 1 20 12FP-1-30-D 1 30 12FP-1-40-D 1 40 12

FP-1-10-e 1 10 12FP-1-20-e 1 20 12FP-1-30-e 1 30 12FP-1-40-e 1 40 12


FP-3-10-B 3 10 12FP-3-20-B 3 20 12FP-3-30-B 3 30 12FP-3-40-B 3 40 12

FP-3-10-C 3 10 12FP-3-20-C 3 20 12FP-3-30-C 3 30 12FP-3-40-C 3 40 12

FP-3-10-D 3 10 12FP-3-20-D 3 20 12FP-3-30-D 3 30 12FP-3-40-D 3 40 12

FP-3-10-e 3 10 12FP-3-20-e 3 20 12FP-3-30-e 3 30 12FP-3-40-e 3 40 12


15

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ Pleated Cartridge Filters POLYPROPYLENE


FIBeRFLO POLYPROPYLeNePLeaTeD FILTeRS

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

QUANTiTYPER CASE


FP-5-10-B 5 10 12FP-5-20-B 5 20 12FP-5-30-B 5 30 12FP-5-40-B 5 40 12

FP-5-10-C 5 10 12FP-5-20-C 5 20 12FP-5-30-C 5 30 12FP-5-40-C 5 40 12

FP-5-10-D 5 10 12FP-5-20-D 5 20 12FP-5-30-D 5 30 12FP-5-40-D 5 40 12

FP-5-10-e 5 10 12FP-5-20-e 5 20 12FP-5-30-e 5 30 12FP-5-40-e 5 40 12


FP-10-10-B 10 10 12FP-10-20-B 10 20 12FP-10-30-B 10 30 12FP-10-40-B 10 40 12

FP-10-10-C 10 10 12FP-10-20-C 10 20 12FP-10-30-C 10 30 12FP-10-40-C 10 40 12

FP-10-10-D 10 10 12FP-10-20-D 10 20 12FP-10-30-D 10 30 12FP-10-40-D 10 40 12

FP-10-10-e 10 10 12FP-10-20-e 10 20 12FP-10-30-e 10 30 12FP-10-40-e 10 40 12

FIBeRFLO POLYPROPYLeNePLeaTeD FILTeRS cont inued

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

QUANTiTYPER CASE


FP-30-10-B 30 10 12FP-30-20-B 30 20 12FP-30-30-B 30 30 12FP-30-40-B 30 40 12

FP-30-10-C 30 10 12FP-30-20-C 30 20 12FP-30-30-C 30 30 12FP-30-40-C 30 40 12

FP-30-10-D 30 10 12FP-30-20-D 30 20 12FP-30-30-D 30 30 12FP-30-40-D 30 40 12

FP-30-10-e 30 10 12FP-30-20-e 30 20 12FP-30-30-e 30 30 12FP-30-40-e 30 40 12


FP-60-10-B 60 10 12FP-60-20-B 60 20 12FP-60-30-B 60 30 12FP-60-40-B 60 40 12

FP-60-10-C 60 10 12FP-60-20-C 60 20 12FP-60-30-C 60 30 12FP-60-40-C 60 40 12

FP-60-10-D 60 10 12FP-60-20-D 60 20 12FP-60-30-D 60 30 12FP-60-40-D 60 40 12

FP-60-10-e 60 10 12FP-60-20-e 60 20 12FP-60-30-e 60 30 12FP-60-40-e 60 40 12

16

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ “A” Pleated Cartridge Filters POLYETHERSULFONEThe FiberFlo “A” Polyethersulfone cartridges are absolutely rated cartridge filters. Made of polyethersulfone membrane, the filters have an increased surface area with excellent flow rates per 10 inch lengths. Their compatibility with a broad range of chemicals and physiologi-cal inertness makes them suitable for the filtration of sera, diagnostic reagents, biological fluids, acids, bases, water and solvents.

dependable PerformanceFiberFlo “A” cartridges consist of a polyethersulfone membrane with thermally bonded polypropylene components to provide a very durable filter with only two materials of construction.

The unique hydrophilic polyethersulfone membrane contains no surfactants or surface wetting agents. Manufactured under QSR, the filters are 100% integrity tested in manufacturing to ensure consistent and reliable performance.

Absolute ratings for FiberFlo “A” cartridges can be verified in the field by integrity testing using bubble point or diffusional flow testing.

All FiberFlo “A” cartridges pass USP class VI plastic tests as well as tests for cytotoxicity, hemolysis and pyrogenicity.

Applications• Final filtration for bacteria removal in reverse osmosis, deionization

and other high purity water systems.• Beverage and wine filtration/clarification• Photographic solutions• Plating solutions• Magnetic coatings

Specifications Filter Media: Pleated Polyethersulfone MembraneMembrane Support, Core Tube, Sleeve, end Caps: PolypropyleneSealing Technology: Thermal Bondingendotoxins: Less than 0.5 eU/mlBiosafety: all components meet or exceed USP Class VI-121° plastic testsOxidizable Substances: Filtrate meets or exceeds USP requirements for

purified water after 1 liter flushO-Ring: SiliconeO-Ring Colour: Red

Cartridge dimensionsNominal Length* Filtration area10 inch 6.5 ft2 / 0.5 m2

20 inch 13.0 ft2 / 1.0 m2

30 inch 19.5 ft2 / 1.5 m2

40 inch 26.0 ft2 / 2.0 m2

Outside diameter 2.77 in / 7 cm


Max. Differential Pressure at 77°F (25°C): 50 PSIg (4.1 bar)Max. Operating Pressure at inlet: 120 PSIg (7 bar)

Pore sizes0.1, 0.2, and 0.45 microns

Operating CharacteristicsTypical Water Flow RatesPore gPM/PSID/ LPM/0.1 bar/ Size 10 inch length 10 inch length0.1 µm 2.5 13.70.2 µm 4.5 24.70.45 µm 7.0 38.4

Recommended integrity TestPore Minimum Water Diffusional Flow cc/minSize Bubble Point @ Test Pressure per 10” length0.1 µm – < 15 @ 48 psig (3.3 bar)0.2 µm > 45 psig (3.1 bar) < 15 @ 35 psig (2.4 bar)0.45 µm > 24 psig (1.7 bar) < 15 @ 20 psig (1.4 bar)


0.5 1 1.5 2 2.5 3 3.5 4 4.5 5

0.45µm

0.2µm

0.1µm

6

5

4

3

2

1

0

DIF

FER

ENTI

AL

PRES

SUR

E (p

sid

)

TYPiCAL WATER FLOW RATEper 10-inch (25 cm) FiberFlo “A”cartridge



FIBERFLO “A” POLYE THERSULFONE PLeaTeD FILTeRS

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

QUANTiTYPER CASE

0.03 Micron Polyethersulfone Pleated FilterFPa-003-10-a 0.03 10 12FPa-003-20-a 0.03 20 12FPa-003-30-a 0.03 30 12FPa-003-40-a 0.03 40 12

FPa-003-10-B 0.03 10 12FPa-003-20-B 0.03 20 12FPa-003-30-B 0.03 30 12FPa-003-40-B 0.03 40 12

FPa-003-10-C 0.03 10 12FPa-003-20-C 0.03 20 12FPa-003-30-C 0.03 30 12FPa-003-40-C 0.03 40 12

FPa-003-10-e 0.03 10 12FPa-003-20-e 0.03 20 12




FPa-01-10-e 0.1 10 12FPa-01-20-e 0.1 20 12

17

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ “A” Pleated Cartridge Filters POLYETHERSULFONE


FIBERFLO “A” POLYE THERSULFONE PLeaTeD FILTeRS cont inued

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

QUANTiTYPER CASE




FPa-02-10-D 0.2 10 12FPa-02-20-D 0.2 20 12FPa-02-30-D 0.2 30 12FPa-02-40-D 0.2 40 12

FPa-02-10-e 0.2 10 12FPa-02-20-e 0.2 20 12FPa-02-30-e 0.2 30 12FPa-02-40-e 0.2 40 12




FPa-045-10-D 0.45 10 12FPa-045-20-D 0.45 20 12FPa-045-30-D 0.45 30 12FPa-045-40-D 0.45 40 12

FPa-045-10-e 0.45 10 12FPa-045-20-e 0.45 20 12FPa-045-30-e 0.45 30 12FPa-045-40-e 0.45 40 12

18

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ “NY” Pleated Cartridge Filters NYLONThe FiberFlo “NY” nylon cartridges are absolutely rated cartridge filters. Made of nylon membrane, the filters have an increased surface area with excellent flow rates per 10 inch lengths. Nylon is compatible with a broad range of chemicals. FiberFlo “NY” filters provide an eco-nomical alternative for the filtration of water, acids, bases, solvents, and other process fluids.

dependable PerformanceFiberFlo “NY” cartridges consist of a nylon membrane with thermally bonded polypropylene components to provide a very durable filter with only two materials of construction.The nylon membrane contains no surfactants or surface wetting agents. Manufactured under QSR, the filters are integrity tested in manufacturing to ensure consistent and reliable performance, and flushed with 17+ megohm cm water to remove any manufacturing debris.

Absolute ratings for FiberFlo “NY” cartridges can be verified in the field by integrity testing using bubble point or diffusional flow testing. All FiberFlo “NY” cartridges pass USP class VI plastic tests as well as tests for cytotoxicity, hemolysis and pyrogenicity.

Applications• Final filtration for bacteria removal in reverse osmosis, deionization

and other high purity water systems.• Particle filtration for ultrapure chemicals• Photographic solutions• Plating solutions• Magnetic coatings

SpecificationsFilter Media: Pleated Nylon MembraneMembrane Support, Core Tube, Sleeve, end Caps: PolypropyleneSealing Technology: Thermal Bondingendotoxins: Less than 0.5 eU/mlBiosafety: all components meet or exceed USP Class VI-121° plastic testsOxidizable Substances: Filtrate meets or exceeds USP requirements for



20 inch 14.0 ft2 / 1.3 m2

30 inch 26.0 ft2 / 1.95 m2

40 inch 28.0 ft2 / 2.6 m2

Outside diameter2.77 in / 7 cm


Max. Differential Pressure at 77°F (25°C): 50 PSIg (4.1 bar)Max. Operating Pressure at Inlet: 120 PSIg (7 bar)Max. Operating Temperature: 176°F (80°C)

Pore sizes0.1, 0.2, 0.45 and 0.65 microns

Operating CharacteristicsTypical Water Flow RatesPore gPM/PSID/ LPM/0.1 bar/ Size 10 inch length 10 inch length0.1 µm 1.0 3.90.2 µm 1.25 4.70.45 µm 3.0 11.40.65 µm 5.5 20.8

Recommended integrity TestPore Diffusional Flow cc/minSize @ Test Pressure per 10” length0.1 µm < 55 @ 48 psig (3.3 bar)0.2 µm < 55 @ 35 psig (2.4 bar)0.45 µm < 55 @ 20 psig (1.4 bar)0.65 µm < 55 @ 15 psig (1.0 bar)


0.5 1 1.5 2 2.5 3 3.5 4

0.65 µm0.45 µm

0.2 µm

0.1 µm

6

5

4

3

2

1

0

DIF

FER

ENTI

AL

PRES

SUR

E (p

sid

)

TYPiCAL WATER FLOW RATEper 10-inch (25 cm) FiberFlo “NY”cartridge



FIBERFLO “NY ” NYLONPLeaTeD FILTeRS cont inued

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

0.45 Micron nylon Pleated FilterFPNY-045-10-a 0.45 10FPNY-045-20-a 0.45 20FPNY-045-30-a 0.45 30FPNY-045-40-a 0.45 40

FPNY-045-10-B 0.45 10FPNY-045-20-B 0.45 20FPNY-045-30-B 0.45 30FPNY-045-40-B 0.45 40

FPNY-045-10-C 0.45 10FPNY-045-20-C 0.45 20FPNY-045-30-C 0.45 30FPNY-045-40-C 0.45 40

FPNY-045-10-e 0.45 10FPNY-045-20-e 0.45 20




FPNY-065-10-e 0.65 10FPNY-065-20-e 0.65 20

FIBERFLO “NY ” NYLONPLeaTeD FILTeRS

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)




FPNY-01-10-e 0.1 10FPNY-01-20-e 0.1 20




FPNY-02-10-e 0.2 10FPNY-02-20-e 0.2 20

19

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ “NY” Pleated Cartridge Filters NYLON

FILTERS ARE SOLD AND SHIPPED INDIVIDUALLY.

20

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ “PM” Pleated Cartridge Filters POLYPROPYLENEThe FiberFlo “PM” polypropylene cartridges are absolutely rated cartridge filters. Made of polypropylene membrane, the filters have an increased surface area with excellent flow rates per 10 inch lengths. Their compatibility with a broad range of chemicals and physiologi-cal inertness makes them suitable for the filtration of acids, bases, water and solvents. The hydrophobic nature of the membrane makes “PM” filters an economical alternative to PTFE membrane filters in air, process gas and vent filter applications.

dependable PerformanceFiberFlo “PM” cartridges consist of a polypropylene membrane with thermally bonded polypropylene components to provide a very durable filter with a single material of construction.

The unique hydrophilic polypropylene membrane contains no surfactants or surface wetting agents. Manufactured under QSR, the filters are 100% integrity tested in manufacturing to ensure consistent and reliable performance, and rinsed with 17+ megohm cm water to remove any manufacturing debris.

All FiberFlo “PM” cartridges pass USP class VI plastic tests as well as tests for cytotoxicity, hemolysis and pyrogenicity.

Applications• Final filtration for high purity process chemicals.• Economical air and process gas filtration• Tank vent filtration

SpecificationsFilter Media: Pleated Polypropylene MembraneMembrane Support, Core Tube, Sleeve, end Caps: PolypropyleneSealing Technology: Thermal Bondingendotoxins: Less than 0.5 eU/mlBiosafety: all components meet or exceed USP Class VI-121° plastic

testsOxidizable Substances: Filtrate meets or exceeds USP requirements for



20 inch 14.0 ft2 / 1.3 m2

30 inch 21.0 ft2 / 1.95 m2

40 inch 28.0 ft2 / 2.6 m2

Outside diameter: 2.77 in / 7 cm


Max. Differential Pressure at 77°F (25°C): 50 PSIg (4.1 bar)Max. Operating Pressure at inlet: 120 PSIg (7 bar)Max. Operating Temperature: 176°F (80°C)

Pore sizes0.1 and 0.2 microns.

Operating CharacteristicsTypical Water Flow RatesPore gPM/PSID/ LPM/0.1 bar/ Size 10 inch length 10 inch length0.1 µm 0.75 2.80.2 µm 2.75 10.4

Typical Air Flow RatePore SCFM/PSID/ m3/psid/hourSize 10 inch length 10 inch length0.1 µm 15 25.50.2 µm 50 85.0

Recommended integrity TestPore Diffusional Flow cc/min Size @ Test Pressure per 10” length**0.1 µm < 30 cc/min @ 40 psig (2.76 bar)0.2 µm < 30 cc/min @ 35 psig (2.41 bar)

** Using water wet membrane



21

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ “PM” Pleated Cartridge Filters POLYPROPYLENE


0.5 1 1.5 2 2.5 3 3.5 4

0.2 µm

0.1 µm

6

5

4

3

2

1

0

DIF

FER

ENTI

AL

PRES

SUR

E (p

sid

)

TYPiCAL WATER FLOW RATEper 10-inch (25 cm) FiberFlo “PM”cartridge

AIR FLOW RATE (gpm)

10 20 30 40 50 60 70 80

0.2 µm

0.1 µm

6

5

4

3

2

1

0

DIF

FER

ENTI

AL

PRES

SUR

E (p

sid

)

TYPiCAL AiR FLOW RATEper 10-inch (25 cm) FiberFlo “PM”cartridge


FIBERFLO “PM” POLYPROPYLENE PLeaTeD FILTeRS

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

QUANTiTYPER CASE

0.1 Micron absolute Polypropylene Pleated FilterFPPM-01-10-a 0.1 10 12FPPM-01-20-a 0.1 20 12FPPM-01-30-a 0.1 30 12FPPM-01-40-a 0.1 40 12

FPPM-01-10-B 0.1 10 12FPPM-01-20-B 0.1 20 12FPPM-01-30-B 0.1 30 12FPPM-01-40-B 0.1 40 12

FPPM-01-10-C 0.1 10 12FPPM-01-20-C 0.1 20 12FPPM-01-30-C 0.1 30 12FPPM-01-40-C 0.1 40 12

FPPM-01-10-e 0.1 10 12FPPM-01-20-e 0.1 20 12

0.2 Micron absolute Polypropylene Pleated FilterFPPM-02-10-a 0.2 10 12FPPM-02-20-a 0.2 20 12FPPM-02-30-a 0.2 30 12FPPM-02-40-a 0.2 40 12

FPPM-02-10-B 0.2 10 12FPPM-02-20-B 0.2 20 12FPPM-02-30-B 0.2 30 12FPPM-02-40-B 0.2 40 12

FPPM-02-10-C 0.2 10 12FPPM-02-20-C 0.2 20 12FPPM-02-30-C 0.2 30 12FPPM-02-40-C 0.2 40 12

FPPM-02-10-D 0.2 10 12

FPPM-02-10-e 0.2 10 12FPPM-02-20-e 0.2 20 12

22

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ “T” Pleated Cartridge Filters TEFLON ®


0.5 1 1.5 2 2.5 3 3.5 4

1.0 µm0.45 µm

0.2 µm

0.1 µm

0.05 µm

6

5

4

3

2

1

0

DIF

FER

ENTI

AL

PRES

SUR

E (p

sid

)

TYPiCAL WATER FLOW RATEper 10-inch (25 cm) FiberFlo “T”cartridge

AIR FLOW RATE (scfm)

10 20 30 40 50 60 70 80

1.0 µm0.45 µm0.2 µm

0.1 µm

0.05 µm

6

5

4

3

2

1

0

DIF

FER

ENTI

AL

PRES

SUR

E (p

sid

)

TYPiCAL AiR FLOW RATEper 10-inch (25 cm) FiberFlo “T”cartridge

The FiberFlo “T” Teflon cartridges provide microfilter users with reliable flow rates, chemical compatibility, economical filtration, and solvent compatibility. Contain-ing 8.0 square feet of expanded PTFe membrane, FiberFlo Teflon Filters offer users a highly efficient hydrophobic “barrier” ensuring low moisture content of ultrapure gasses. additionally, it will ensure filtration performance in the purifica-tion of aggressive liquids and organic solvents. each FiberFlo Teflon cartridge filter is manufactured and integrity tested in a certified Class 10,000 cleanroom to assure consistent performance and quality. all components are thermally bonded to as-sure integrity and to reduce extractables.

Applications• Photoresists• Compressed Gas• Electronic Grade Solvents• Pharmaceutical and intermediate Solvents• Hot Deionized Water• Tank Vents

SpecificationsMembrane Material: PTFeSupport Layers : PolypropyleneCartridge Hardware: Polypropylene

Cartridge dimensions*Nominal Length: 10, 20, 30, and 40 inchesOutside Diameter: 2.77 in / 7 cm*Actual overall length of cartridge will vary depending on configuration. Cartridge performance is as specified regardless of configuration.



Maximum Operating Pressure Forward:80 psid (5.5 bar) @ 75°F (24°C)

Maximum Operating Pressure Reverse:50 psid (3.8 bar) @ 75°F (24°C)

Chemical CompatibilityCompatible with most semiconductor grade solvents and other chemicals.

Pore sizes0.05, 0.1, 0.2, 0.45, and 1.0 microns.

integrity Test valuesMicron 100% IPA Pore Size Bubble Point0.05 µm 30 psig (2.1 bar)0.1 µm 22 psig (1.5 bar)0.2 µm 15 psig (1.0 bar)0.45 µm 9 psig (0.6 bar)1.0 µm 6 psig (0.4 bar)

Operating Characteristics

Typical Water Flow Rates**0.05 µm 1.0 gpm/psid (55 lpm/bar) 0.1 µm 1.25 gpm/psid (69 lpm/bar)0.2 µm 2.8 gpm/psid (154 lpm/bar)0.45 µm 5.7 gpm/psid (313 lpm/bar)1.0 µm 9.0 gpm/psid (494 lpm/bar)

** For fluids with a viscosity of 1 cp per 10” (25 cm) cartridge equivalent.

Typical Air Flow Rate0.05 µm 22 scfm/psid (9.0 slpm/mbar)0.1 µm 29 scfm/psid (11.9 slpm/mbar)0.2 µm 47 scfm/psid (19.3 slpm/mbar)0.45 µm 73 scfm/psid (29.9 slpm/mbar)1.0 µm 94 scfm/psid (38.5 slpm/mbar)

FIBERFLO “ T ” TEFLON PLeaTeD FILTeRS cont inued

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)

0.45 Micron teflon Pleated FilterFPT-045-10-a 0.45 10FPT-045-20-a 0.45 20FPT-045-30-a 0.45 30FPT-045-40-a 0.45 40

FPT-045-10-B 0.45 10FPT-045-20-B 0.45 20FPT-045-30-B 0.45 30FPT-045-40-B 0.45 40

FPT-045-10-C 0.45 10FPT-045-20-C 0.45 20FPT-045-30-C 0.45 30FPT-045-40-C 0.45 40

FPT-045-10-D 0.45 10FPT-045-20-D 0.45 20FPT-045-30-D 0.45 30FPT-045-40-D 0.45 40

FPT-045-10-e 0.45 10FPT-045-20-e 0.45 20FPT-045-30-e 0.45 30FPT-045-40-e 0.45 40

1.0 Micron teflon Pleated FilterFPT-1-10-a 1 10FPT-1-20-a 1 20FPT-1-30-a 1 30FPT-1-40-a 1 40

FPT-1-10-B 1 10FPT-1-20-B 1 20FPT-1-30-B 1 30FPT-1-40-B 1 40

FPT-1-10-C 1 10FPT-1-20-C 1 20FPT-1-30-C 1 30FPT-1-40-C 1 40

FPT-1-10-D 1 10FPT-1-20-D 1 20FPT-1-30-D 1 30FPT-1-40-D 1 40

FPT-1-10-e 1 10FPT-1-20-e 1 20FPT-1-30-e 1 30FPT-1-40-e 1 40

23

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo™ “T” Pleated Cartridge Filters TEFLON ®

FILTERS ARE SOLD AND SHIPPED INDIVIDUALLY.

FIBERFLO “ T ” TEFLON PLeaTeD FILTeRS

PARTNUMBER

MiCRONRATiNg

LENgTH(iN.)











24

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo® Hollow Fiber Cartridge Filters CARTRidgE FiLTERS Features• Provides consistent and verifiable pyrogen removal that

surpasses traditional, absolute-rated filters.• Up to 3X the surface area of comparable pleated cartridge filters.• Can be steam sterilized in-line or autoclaved off-line.• Delivers fine filtration at high flow rates with low pressure drops.• Available in 4 sizes, 4 micron ratings and a variety of endcap

styles.• Filters exceed requirements of USP Class VI Plastics Testing; meets

USP standards for water extractables. Filters are integrity testable by diffusional methods.

Suggested ApplicationsNew, high performance FiberFlo® HF Cartridge Filters are extremely versatile. They can be used in a wide variety of industries and applications.

Pharmaceutical ManufacturingUSP purified WaterOphthamolicsSerum and other Blood FractionsBuffersgrowth MediaFermentation Feed Stocks

Medical and LaboratoryMedical Device RinsingHemodialysis Water SystemsMedical equipment Rinsewater

Food and BeverageSoft DrinksMineral and Bottled WatersDistilled SpiritsFood Products Makeup and Rinse WatersSeltzer, Vinegar

industrialDeionized WaterIndustrial Process WaterDilute Inorganic Chemical SolutionsSemiconductor Manufacturing

FiberFlo® Cartridge Membrane Selection

FiberFlo® 50Offers highest degree of control of particulates and microganisims;

recommended for highest pyrogen removal applications.absolute pore removal rating of 0.05 µm. Polyphen® polysulphone

membrane.Maximum flow rate per 10-inch segment - 2.5 gpm.Will remove 100 percent of endotoxin when challenged with a feed

concentration of 5.0 eU/ml.

FiberFlo® 100Offers best balance of flow, pressure, retentive capacity, pyrogen removal

and cost.absolute pore removal rating of 0.1 µm.Maximum flow rate per 10-inch segment - 3.0 gpm.Will remove 100 percent of endotoxin when challenged with a feed


FiberFlo® 200Offers maximum flow rates without loss of bacteria retention.absolute removal of Brevundimonas diminuta is a characteristic of this filter.absolute pore removal rating of 0.2 µm.Maximum flow rate per 10-inch segment - 3.0 gpm.Will remove 100 percent of endotoxin when challenged with a feed


FiberFlo® 450Designed for prefiltration and fluid clarification applications.assures maximum protection of downstream sterilizing filters.absolute pore removal rating of 0.45 µm.Maximum flow rate per 10-inch segment - 5.0 gpm.Provides superior particle control, dirt-holding capacity, and flow rates.

18

16

14

12

10

8

6

4

2

0

1.5

1.0

0.5

PLEATED-M PLEATED-F PLEATED-G PLEATED-P FIBERFLO

SQU

AR

E M

ETER

S

SQU

AR

E FE

ET

Filter Area Comparison

• Fine filtration• High flow with low pressure drops• Longer filter life

F I B e R F LO C a R T R I D g e F I LT e R SPART

NUMBERPROdUCT

dESCRiPTiONMiCRONRATiNg

LENgTH(iN.)

50-103 222 O-Ring replaces Pall Code 3, Millipore Code 0 0.05 1050-104 222 O-Ring w/fin, replaces Pall Code 8, Millipore Code 5 0.05 1050-105 226 O-Ring w/fin, replaces Pall Code 7, Millipore Code 7 0.05 1050-107 119 O-Ring Internal O-Ring for Pentek Housing* 0.05 1050-203 222 O-Ring replaces Pall Code 3, Millipore Code 0 0.05 2050-204 222 O-Ring w/fin, replaces Pall Code 8, Millipore Code 5 0.05 2050-205 226 O-Ring w/fin, replaces Pall Code 7, Millipore Code 7 0.05 2050-208 119 O-Ring Internal O-Ring for Pentek Housing* 0.05 2050-303 222 O-Ring replaces Pall Code 3, Millipore Code 0 0.05 3050-304 222 O-Ring w/fin, replaces Pall Code 8, Millipore Code 5 0.05 3050-305 226 O-Ring w/fin, replaces Pall Code 7, Millipore Code 7 0.05 30




25

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo® Hollow Fiber Cartridge Filters

*Simple filter bowl modifications are required for this cartridge. Contact us for more information.FILTERS ARE SOLD AND SHIPPED INDIVIDUALLY.

CARTRidgE FiLTERS

26

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo® Hollow Fiber Capsule Filters

Features• Provides consistent and verifiable pyrogen removal that surpasses traditional, absolute-rated filters.• Up to 6X the surface area of comparable pleated

capsule filters.• Can be steam sterilized in-line or autoclaved off-line.• Delivers fine filtration at high flow rates with low pressure drops.• Available in 3 sizes, 5 micron ratings and a variety of endcap styles (see chart).• Filters exceed requirements of USP Class VI Plastics testing; meets USP standards for water extractables.

Suggested ApplicationsNew high performance FiberFlo® HF Capsule Filters are extremely versatile. They can be used in a wide variety of industries and applications.

Pharmaceutical ManufacturingUSP purified WaterOphthamolicsSerum and other Blood FractionsBuffersgrowth MediaFermentation Feed Stocks

Medical and LaboratoryMedical Device RinsingHemodialysis Water SystemsMedical equipment Rinsewater

Food and BeverageSoft DrinksMineral and Bottled WatersDistilled SpiritsFood Products, Makeup and Rinse WatersSeltzer, Vinegar

industrialDeionized WaterIndustrial Process WaterDilute Inorganic Chemical Solutions

FiberFlo® Capsule Membrane Selection

FiberFlo® 30Offers very fine filtration for gas and venting applications.Polypropylene hydrophobic hollow fiber filter.absolute pore removal rating of 0.03 µm.Repels water and can be wetted by an aqueous solution with high surface

tension if prewetted with alcohol.

FiberFlo® 50Offers highest degree of control of particulates and microganisims;

recommended for highest pyrogen removal applications.absolute pore removal rating of 0.05 µm. Polyphen® polysulphone

membrane.Will remove 100 percent of endotoxin when challenged with a feed


FiberFlo® 100Offers best balance of flow, pressure, retentive capacity, pyrogen removal

and cost.absolute pore removal rating of 0.1 µm.Will remove 100 percent of endotoxin when challenged with a feed


FiberFlo® 200Offers maximum flow rates without loss of bacteria retention.absolute removal of Brevundimonas diminuta is a characteristic

of this filter.absolute pore removal rating of 0.2 µm.Will remove 100 percent of endotoxin when challenged with a feed

concentration of 0.5 eU/ml.Not designed to remove pyrogens.

FiberFlo® 450Designed for prefiltration and fluid clarification applications.assures maximum protection of downstream sterilizing filters.absolute pore removal rating of 0.45 µm.Provides superior particle control, dirt-holding capacity, and flow rates.Not designed to remove pyrogens.

CAPSULE FiLTERS • Fine filtration• High flow with low

pressue drops• Longer filter life

6

5

4

3

2

1

0

5574cm2

1858cm2

557cm2

FIBERFLO®

S-STYLECAPSULE

FIBERFLO®

M-STYLECAPSULE

FIBERFLO®

L-STYLECAPSULE

SQU

AR

E C

ENTI

MET

ERS

SQU

AR

E FE

ET

Compact Size — Larger Filter Area

27

FiL

TE

RS

& M

EM

BR

AN

ES


FiberFlo® Hollow Fiber Capsule Filters

FIBeRFLO™ HOLLOW FIBeR POLYSULFONeWaTeR CaPSULe F ILTeRS

PART CAPSULE iNLiNE/ MiCRON ENd- QUANTiTY NUMBER SizE CROSS FLOW RATiNg FiTTiNg PER CASE

L-I-050-a L I 0.05 a 6

L-C-050-a L C 0.05 a 6

L-I-050-B L I 0.05 B 6

L-C-050-B L C 0.05 B 6

L-C-050-H L C 0.05 H 6

L-I-050-H L I 0.05 H 6

L-I-100-a L I 0.10 a 6

L-I-100-B L I 0.10 B 6

L-C-100-B L C 0.10 B 6

L-C-100-H L C 0.10 H 6

L-I-100-H L I 0.10 H 6

L-I-200-a L I 0.20 a 6

L-I-200-B L I 0.20 B 6

L-C-200-B L C 0.20 B 6

L-C-200-H L C 0.20 H 6

L-I-200-H L I 0.20 H 6

L-I-450-a L I 0.45 a 6

L-C-450-a L C 0.45 a 6

M-I-050-a M I 0.05 a 6

M-I-050-D M I 0.05 D 6

M-C-050-L M C 0.05 L 6

M-I-100-a M I 0.10 a 6

M-I-100-D M I 0.10 D 6

M-C-100-L M C 0.10 L 6

M-I-200-a M I 0.20 a 6

M-I-200-D M I 0.20 D 6

M-C-200-L M C 0.20 L 6

CAPSULE FiLTERS

FIBeRFLO VeNT FILTeR CaPSULe F ILTeRSPOLYPROPLeNe HOLLOW FIBeR

PART CAPSULE iNLiNE/ MiCRON ENd- QUANTiTY NUMBER SizE CROSS FLOW RATiNg FiTTiNg PER CASE

LV-C-030-a LV C 0.03 a 6 LV-C-030-B LV C 0.03 B 6 LV-C-030-H LV C 0.03 H 6 MV-C-030-K MV C 0.03 K 6 MV-C-030-L MV C 0.03 L 6

idENTiFiCATiON Capsule Size (Membrane Surface Area) inline/Cross Flow Micron Rating/grade End-Fitting Option

L = 6.0 ft2 C = Cross Flow 030 = 0.03 µm* 200 = 0.20 µm (see chart above) M = 2.0 ft2 i = Inline 050 = 0.05 µm 450 = 0.45 µm 100 = 0.10 µm EN = endotoxin Removal

Number 279-30-001 is 6.0 square foot capsule filter with inline design, a 0.05 micron rating, a quarter inch NPT inlet and a quarter inch NPT outlet

*available with polpropylene hollow fiber filters only.

FIBeRFLO eNDOTOXIN ReMOVaL HOLLOW FIBeR CaPSULe F ILTeRS

PART CAPSULE iNLiNE/ ENd- QUANTiTY NUMBER SizE CROSS FLOW gRAdE FiTTiNg PER CASE L-I-eN-a L I eN a 6 L-I-eN-B L I eN B 6 L-I-eN-C L I eN C 6 L-I-eN-e L I eN e 6 L-I-eN-g L I eN g 6 L-I-eN-H L I eN H 6 M-I-eN-a M I eN a 6 M-I-eN-D M I eN D 6 M-I-eN-F M I eN F 6 M-I-eN-J M I eN J 6

ENd-FiTTiNg OPTiONS FiberFlo Code a B C D e F g H J K L

inlet description1/4 inch NPT3/8 inch NPT1/2 inch hose barb3/8 inch hose barb1/4 inch NPT1/4 inch NPT3/8 inch NPTSanitaryLuer1/4 inch NPT3/8 inch hose barb

Outlet description1/4 inch NPT3/8 inch NPT1/2 inch hose barb3/8 inch hose barb1/2 inch hose barb3/8 inch hose barb1/2 inch hose barbSanitaryLuerLuerLuer

Filter TypeInline, Cross FlowInline, Cross FlowInline, Cross FlowInlineInlineInlineInlineInline, Cross FlowInlineCross FlowCross Flow

FILTERS SOLD IN CASE AMOUNTS ONLY

28

FiL

TE

RS

& M

EM

BR

AN

ES


Filter Housings Big BLUE ®

Big Blue® Housings offer the versatility to meet larger capacity filtration needs. This reduces the number of housings required for high-flow applications.

Characteristics• Large capacity housing• Sumps constructed of durable reinforced polypropylene• 1.25-inch internal port to allow a greater volume of liquid to pass through the

high-flow polypropylene cap more rapidly• accepts 4.5-inch diameter cartridges• Compatible with a broad range of chemicals

STANdARd HOUSiNg3g® Cartridge Housings feature unique and innovative 3g® design. This patented design features integral brackets, 10-inch or 20-inch length, clear housings, and caps for differential pressure gauges. Polypropylene construction offers excellent chemical compatibility.

Characteristics• Reinforced polypropylene housings have excellent chemical resistance• Clear housings offer on-site examination of the cartridge and have excellent chemical compatibility• Buttress threads and uniform walls for easier cartridge change and improved strength• accepts proprietary Seal-Safe™ double o-ring sealing cartridges as well as standard double open end cartridges• Optional pressure relief/bleed button and differential pressure gauge• Leak-proof sealing with top-seated floating Buna-N® o-ring• Inlet and outlet available in 0.25-, 0.38-, 0.5- and 0.75-NPT• accommodate a wide range of 2.25- to 3.125-inch diameter cartridges

BIg BLUe F ILTeR HOUSINgS

PARTNUMBER

PROdUCT dESCRiPTiON

iNLET/OULET SizE (iNCHES)

150238 10" big blue polypropylene prefilter housing 1

150235 20" big blue polypropylene housing 1 1/2

STaNDaRD FILTeR HOUSINgS

PARTNUMBER

PROdUCT dESCRiPTiON


150067 10" blue polypropylene prefilter housing, light duty 3/4

150069 20" blue polypropylene prefilter housing, light duty 3/4

29

FiL

TE

RS

& M

EM

BR

AN

ES


Filter Housings OPAQUE FiLTER HOUSiNgSall Natural Polypropylene Cartridge Housings help maintain high standards of purity and performance required in critical contamination control systems and processes.

Characteristics• all Natural polypropylene components – no fillers, colourants, plasticizers or lubricants• economical alternative to fluoropolymer, Stainless Steel or Teflon® housings• Ultra-smooth contact surfaces prevent bacterial adhesion and build-up• Resists deionized water and other inorganic solutions• Resists stress cracking• Viton® o-rings for dependable sealing• 0.75-inch NPT inlet and outlet threads• Compatible with most manufacturers

#20 OPAQUE

Filter Housings STAiNLESS STEEL FiLTER HOUSiNgSST Series Stainless Steel Cartridge Housings effectively provide heavy-duty filtration for smaller filtration systems and point-of-use applications.

Characteristics• Flow rates of up to 20 gpm (76 lpm) at 300ºF• Heavy duty construction• Brushed 304 Stainless Steel sump with a cast brass/nickel plated head• accepts complete range of standard double open end (DOe) cartridges• easy to install and maintain• Compatible with a complete range of filter cartridges

OPaQUe FILTeR HOUSINgS

PARTNUMBER

PROdUCT dESCRiPTiON

150152 10" virgin polypropylene filter housing, 222 O-ring



STaNDaRD FILTeR HOUSINgS

PARTNUMBER

PROdUCT dESCRiPTiON


FOS-786-316 10" 316L stainless steel prefilter, DOe 3/4

FOS-808-316 20" 316L stainless steel prefilter, DOe 1

FOS-908-316 30" 316L stainless steel prefilter, DOe 1

CSF-786-222 10" 316L stainless steel prefilter, 222 O-ring 3/4

CSF-808-222 20" 316L stainless steel prefilter, 222 O-ring 1

CSF-908-222 30" 316L stainless steel prefilter, 222 O-ring 1

Nd SERiES

aCCeSSORIeS

PARTNUMBER

PROdUCT dESCRiPTiON

4241291 0-100 psi brass pressure gauge, 1/4" LM7265981 0-100 psi stainless steel pressure gauge, 1/4" LM150578 Wall mounting bracket kit - metal150061 Wall mounting bracket kit - stainless steel, big blueQ424Ie Replacement O-ring, ePDM151122 Replacement O-ring, ePDM, big blueHa2211 1/4" SS gauge/sample kit

SSV14W-e SS eSP sample valve welded 1/4"SSV14T-S SS eSP sample valve 1/4" NPTM

SPaNNeR-1 Spanner wrench for slim line housingSPaNNeR-2 Spanner wrench for #10 & #20 housingSPaNNeR-3 Spanner wrench for big blue housing

30

FiL

TE

RS

& M

EM

BR

AN

ES


Mounting Bracket For 3/4 HousingsThis MC-1 Kit bracket is made for the 3/4 filters only.

ACCESSORiES S.S. Mounting Bracket For Large HousingsThe WB-SS Kit is made for the Big Blue housing.

Spanner WrenchesUse to loosen sump when

changing cartridges.

Mounting Bracket For 3/4 HousingsThe UB-1 bracket is made for the 3/4 inlet/outlet housings only. Constructed of zinc-plated steel.

Filter Housings

Specifically designed for small to large capacity, industrial filtration. Designed for robust aSMe Code and Non-Code applications. engineered for filtration applications involving chemical systems, high purity water, general pre-filtration and final product purification. Constructed of corrosion resistant 316 series stainless steel to ensure longevity and system purity. all wetted and external surfaces are electropolished for trouble free mainte-nance and easy cleaning.

S iNgLE & MULTi-ROUNd HOUSiNgS

industrial Filter Housings (Nd SERiES)

design CapabilitiesOur Industrial (ND Series) Code rated filter housings are fabricated in strict compliance with aSMe Boiler and Pressure Vessel Code, Section VIII, Division I. all Code rated vessels have the option of carrying the U-Stamp, R-Stamp and National Board NB Stamp. Our Industrial (ND Series) Non-Code rated housings are available as a standard option where cost is the primary driver.

Surface Finishesall surfaces are electropolished to minimize contamination and ease of cleaning. Non-electropolished and bead-blasted finishes are also standard.

Custom-designed HousingsOur complete design and fabrication expertise allow the production of filter housings with expedited design and on-time deliveries.

Configurations1 Round: T-Style3 to 21 Round: T-Style and Offset.

Materials316 Series Stainless Steel ePDM, ePR seals standard.all other compounds available as options.

Closure1 Round: Heavy Duty TC Sanitary Clamp3 to 21 Round: Swing Bolt and Nut

Housing Sizes and Filter Length1 Round: 10, 20, 30, and 40-inch3 to 21 Round: 10, 20, 30 and 40-inch

Filter Connections1 to 21 Round: DOe, Code 7 (226),Code 8 (222), Cup and Post, 020

Pressure Ratings1 Round: 250 psi (liquid), 125 psi (gas)

Hydrostatic Test Pressure: 375 psi @ 60°F +/- 20°3 to 21 Round: 150 psi @ 100°F

Hydrostatic Test Pressure: 195 psi @ 60°F +/- 20°

gasket/O-Ring MaterialsBuna-N -40 to +250°F (-40 to +121°C)Viton -15 to +400°F (-26 to +204°C)Silicone (std) -80 to +450°F (-62 to +232°C)ePDM, ePR -65 to +300°F (-54 to +149°C)PTFe, Teflon -65 to +500°F (-54 to +260°C)

Connectionsavailable in NPT and RF Flange.

CALL FOR PRICING AND AVAILABILITY.

NdH SERiESNdv SERiESSN SERiES SNv SERiES

31

FiL

TE

RS

& M

EM

BR

AN

ES


engineered to meet the sterile filtration demands of the biotech and pharmaceutical industries. Housing designs with 25 Ra standard internal surface finishes and no wetted threaded connections. engineered for filtration applications involving chemical systems, high purity, general filtration and final product purification. Constructed of corrosion resistant 316 series stainless steel to ensure longevity and system purity. Vent and drain valves configured for easy cleaning and efficient sampling.


Sanitary Filter Housings (SN SERiES)

design CapabilitiesOur Sanitary (SN Series) Code rated filter housings are fabricated in strict compliance with aSMe Boiler and Pressure Vessel Code, Section VIII, Division I.

Surface Finishesall surfaces are electropolished to minimize contamination and ease of cleaning. all wetted surfaces are standard 25 Ra. all non-wetted surfaces are 32 Ra. Finishes as low as 5 Ra are available as an option.

Custom-designed HousingsOur complete design and fabrication expertise allow the production of filter housings with expedited design and on time deliveries.

Configurations1 to 21 round: In-Line and T-Style.

Materials316L Series Stainless Steel Silicone O-Rings standard.all other compounds available as options.

Closure1 Round: Heavy Duty TC Clamp3 to 21 Round: Swing Bolt and Nut

Sizes1 Round: 10, 20, 30, and 40-inch3 to 21 Round: 10, 20, 30, 40-inch.

Filter ConnectionsCode 7 (226) and Code 8 (222) standard.

Pressure Ratings1 Round: 250 psi (liquid), 125 psi (gas)

[Steam Jacket: 50 psi]. Hydrostatic Test Pressure: 375 psi

3 to 12 Round: 150 psi @ 200°F and full vacuum [Steam Jacket: 75 psi] @ 60°F +/- 20°




engineered to meet the sterile filtration demands of the food/beverage and pharmaceutical industries. Housing designs with 10-25 Ra internal surface finishes and no wetted threaded connections. electropolished mirror finishes. engineered for quick, frequent change outs with the proprietary, heavy duty STaClamp closure system. Constructed of corrosion resistant 316L series stainless steel to ensure longevity and system purity. Vent and drain valves configured for easy cleaning and efficient sampling. eight different vent and drain configurations.

design Capabilities


Sanitary value Filter Housings (SNv SERiES)

Our Sanitary Value housings (SNV Series) are available as standard Non-Code where cost is the primary driver. aSMe Code requirements are handled by the sanitary housings (SN Series)

Surface Finishesall surfaces are electropolished to minimize contamination and ease of cleaning. all wetted surfaces are standard 25 Ra. all non-wetted surfaces are 32 Ra. Finishes as low as 10 Ra are available as an option.

Custom-designed HousingsOur complete design and fabrication expertise allow the production of filter housings with expedited design and on time deliveries.

Configurations3 round: In-Line and T-Style.

Materials316L Series Stainless Steel Silicone Sanitary gasket standard.all other compounds available as options.

Closure3 Round: Heavy Duty Sanitary TC Clamp. Proprietary STaClamp System is available as an option.

Sizes3 Round: 10, 20, 30 and 40-inch

Filter ConnectionsCode 7 (226) and Code 8 (222) standard.

Pressure Ratings3 Round: 150 psi @ 200°F and full vacuum

[Steam Jacket: 50 psi]. Hydrostatic Test Pressure: 195 psi @ 60°F +/- 20°

[Steam Jacket: 75 psi] @ 60°F +/- 20°

gasket MaterialsBuna-N -40 to +250°F (-40 to +121°C)Viton -15 to +400°F (-26 to +204°C)Silicone (std) -80 to +450°F (-62 to +232°C)ePDM, ePR -65 to +300°F (-54 to +149°C)PTFe, Teflon -65 to +500°F (-54 to +260°C)


32

FiL

TE

RS

& M

EM

BR

AN

ES


Specifically designed for small and large capacity, general purpose filtration. Designed for extremely cost-sensitive applications. engineered for filtration applications involving chemical systems, high purity water, general pre-filtration and final product purification. Constructed of corrosion resistant 304 or 316 series stainless steel to ensure longevity and system purity. all wetted and external surfaces are electropolished for trouble free maintenance and easy cleaning.


industrial value Filter Housings (Ndv SERiES)

design CapabilitiesOur filter housings are fabricated in Non-aSMe Code as standard where cost is the primary driver.

Surface Finishesall surfaces are electropolished to minimize contamination and ease of cleaning. Non-electropolished is also standard.

Custom-designed HousingsOur complete design and fabrication expertise allow the production of filter housings with expedited design and on time deliveries.SpecificationsConfigurations1 Round: T-Style 4 to 21 Round: Offset.

Materials304 and 316 Series Stainless Steel Buna seals standard. all other com-pounds available as options.

Closure1 Round: Cover Nut4 to 21 Round: V-Band and Swing Bolt

Housing Sizes and Filter Length1 Round: 10, 20, and 30-inch4, 5, 7 Round: 10, 20, 30 and 40-inch12 Round: 20, 30 and 40-inch21 Round: 30 and 40-inch

Filter Connections1 Round: DOe4-21 Round: 222/DOe Universal Cup

Pressure Ratings1 Round: 250 psi @ 100 °F

Hydrostatic Test Pressure: 325 psi @ 60°F +/- 20°4 to 21 Round: 150 psi @ 100°F



Connectionsavailable in NPT, RF Flange, TC Sanitary and Victaulic®.


Specifically designed for small and large capacity, high purity industrial filtration. Designed for extremely cost-sensitive applications. engineered for filtration applications involving chemical systems, high purity water, general pre-filtration and final product purification. Constructed of corrosion resistant 316L series stainless steel to ensure longevity and system purity on wetted surfaces. all wetted and external surfaces are electropolished for trouble free maintenance and easy cleaning.


industrial High Purity Filter Housings (NdH SERiES)

design CapabilitiesOur filter housings are fabricated in Non-aSMe Code as standard where cost is the primary driver.

Surface Finishesall surfaces are electropolished to minimize contamination and ease of cleaning. Non-electropolished, satin finish is optional.

Custom-designed HousingsOur complete design and fabrication expertise allow the production of filter housings with expedited design and on time deliveries.SpecificationsConfigurations3 to 21 Round: T-Style.

Materials316 Series Stainless Steel wetted.ePR, ePDM O-rings standard.all other compounds available as options.

Closure3 to 21 Round: Swing Bolt

Housing Sizes and Filter Length3, 5, 6, 7 Round: 10, 20, 30 and 40-inch12 Round: 20, 30 and 40-inch21 Round: 30 and 40-inch

Filter Connections3 to 21 Round: 222/DOe Universal Cup, DOe, Cup & Post, 226

Pressure Ratings3 to 21 Round: 150 psi @ 200°F



Connectionsavailable in TC Sanitary, NPTF, and RF Flange .


33

FiL

TE

RS

& M

EM

BR

AN

ES


FILMTeC MeMBRaNeSPART

NUMBERPERFORMANCE

gPddiMENSiONS

(iN.)

2-inch Membrane ElementsTW30-2026 220 1.8 X 26TW30-2514 200 2.5 X 14TW30-2521 325 2.5 X 21TW30-2540 850 2.5 X 40BW30-2540 850 2.5 X 40

4-inch Membrane ElementsTW30-4014 525 4.0 X 14TW30-4021 900 4.0 X 21TW30-4040 2,400 4.0 X 40

LP-4040 2,700 4.0 X 40BW30-4040 2,400 4.0 X 40

BW30Le-4040 2,300 4.0 X 40HSRO-4040-FF 1,900 4.0 X 40

RO-4040-FF 2,650 4.0 X 408-inch Membrane Elements

BW30-365 9,500 8.0 X 40BW30-400 10,500 8.0 X 40

BW30Le-440 11,500 8.0 X 40RO-390-FF 11,500 8.0 X 40

HSRO-390-FF 9000 8.0 X 40

Membrane Elements FiLMTEC ®

REvERSE OSMOSiS ELEMENTSFilmtec membranes are specifically designed to meet the tough demands of water treatment and water purification. each element is engineered for precise use in commerical, industrial, and municipal applications. These membranes are spiral wound, composite thin film polyamide (Pa). Low pressure tapwater, semiconductor, and nanofiltration elements are also available. Compared to most other thin-film composites Filmtec Series membranes are more resistant to chemical degradation, exhibit higher salt rejection and flow rates, and provide more consistent performance.

FiLMTEC ClassTW = Tapwater - Stablized Salt Rejection - 98-99% SW = Seawater - Stablized Salt Rejection - 99.4%BW = Brackish Water - Stablized Salt Rejection - 99%FF = Full FitHP = High ProductionHR = High RejectionHS = Heat SanitizableLe, LP or XLe = Low enegry / Pressure

Note: Interconnectors are included in the element price.Flow rates for individual elements may vary.DOW - Trademark of The Dow Chemical Company.which is a trademark of FilmTec Corporation, a whollyowned subsidiary of the Dow Chemical Company.

TRISeP MeMBRaNeSPART

NUMBERPERFORMANCE

gPddiMENSiONS

(iN.)

2-inch Membrane Elements2540aCM2TSF 650 2.5 X 40

4-inch Membrane Elements4040aCM2TSa 2,450 4.0 X 404040aCM2TSF 2,400 4.0 X 404040aCM4TSa 3,450 4.0 X 404040M5P3U5 2,400 4.0 X 40

8-inch Membrane Elements8040aCM2TSa 9,700 8.0 X 408040aCM4TSa 14,600 8.0 X 408040M2P3T6 9,400 8.0 X 40

Membrane Elements TRiSEP ®

REvERSE OSMOSiS ELEMENTSTriSep offers a broad array of spiral wound membrane products. With one of the broadest selections of of RO, NF, UF, and MF membrane chemistries, TriSep can deliver a product for your specific requirement. In addition, TriSep offers several construction varieties including sanitary Turboclean, high pressure, high temperature, and different thickness feed spacers. elements can be custom engineered to meet specific application requirements. TriSep also manufactures a broad line of direct replacement elements for system retrofits

HYDRaNaUTICS MeMBRaNeSPART

NUMBERPERFORMANCE

gPddiMENSiONS

(iN.)

4-inch Membrane ElementsCPa2-4040 2,250 3.95 X 40eSPa1-4040 2,600 3.95 X 40SaNRO-HS4 2,200 3.98 X 40

SaNRO-HS24 3,000 3.98 X 408-inch Membrane Elements

eSPa1-8040 12,000 7.89 X 40SaNRO-H28 8,800 7.90 X 40

SaNRO-HS28 14,000 7.90 X 40

Membrane Elements HYdRANAUTiCS ®

REvERSE OSMOSiS ELEMENTSapplied Membranes manufactures reverse osmosis membrane elements for reverse osmosis, Nanofiltration, Ultrafiltration and Microfiltration.

34

FiL

TE

RS

& M

EM

BR

AN

ES


Membrane Elements dESAL® PURE WATER & gE OSMONiCS®RO & UF MEMBRANESReverse Osmosis (RO) has proven to be one of the most effective means for removing salts, chemical contaminants, and heavy metals such as lead, from drinking water. It is a separation process in which feedwater permeates a selective membrane. Dissolved as well as undissolved materials are rejected by the membrane and carried away in the waste (concentrate) stream. The permeate, or product water, contains only a fraction of these materials, with TDS - total dissolved solids (a measure of the salt content in water) only present at a nominal 2-6% of the original feedwater concentration.

Ultrafiltration (UF) is similar to RO and NF, but is defined as a crossflow process that does not reject ions. UF rejects solutes above 1000 daltons (molecular weight). Because of the larger pore size in the membranes, UF requires a much lower differential operating pressure: 10 to 100 psig (0.7 to 6.9 bar). UF removes larger organics, colloids, bacteria, and pyrogens while allowing most ions and small organics such as sucrose to permeate the porous structure.

DeSaL® PURe WaTeR & ge OSMONICS MeMBRaNe eLeMeNTS

PART PROdUCTNUMBER dESCRiPTiON

Thin Film Reverse Osmosis Elementsag2514TM 2.5" X 14" High Rejection TFM, Tapeag2521T 2.5" X 21" High Rejection TFM, Tape

ag2540T1273 2.5" X 40" High Rejection TFM, Tapeag3012T 3.0" X 10" High Rejection TFM, Tape

ag3012TM High Rejection Tfm, Tapeag3308T 3.3" X 20" High Rejection TFM, Tape

ag3525TM 3.5" X 25" High Rejection TFM, Tapeag4025T 4.0" X 25" High Rejection TFM, Tape

ag421T1459 Membraneag4025C1735 4.0" X 25" High Pressure TFM, 1200 gpdag4025T1534 4.0" X 25" Tfm,ag4026F114 Membrane

ag4040F (411Hfpa) - 4.0" X 40" High Rejection TFM, Fiberglass (4400Ro Standard)

ag4040TF 4.0" X 40" High Rejection TFM, Fiberglassag4040C 4.0" X 40" High Rejection TFM, Durasan

ag8040F-1296 8.0" X 40" High Rejection TFM, FiberglassLow Pressure

ag8040C 8.0" X 40" High Rejection TFM, DurasanLow Pressure Reverse Osmosis Elements

aK2521TF 2.5” X 21” Replacement Filter for 2200 SeriesaK4021TF 4.0” X 21” Replacement Filter for 3300 Series

aK4040-1309 4.0" X 40" High Rejection TFM, FiberglassaK4040FF 4.0" X 40" High Rejection TFM, FiberglassaK4040C 4.0" X 40" High Rejection TFM, DurasanaK8040 8.0" X 40" High Rejection TFM, Fiberglass

aK8040C 8.0" X 40" High Rejection TFM, DurasanSeawater Reverse Osmosis Elements

aD4040F 4.0" X 40", High Rejection, FiberglassaD8040F 8.0" X 40", High Rejection, Fiberglass

High Temperature Reverse Osmosis ElementsSg4040CZH 4.0" X 40", High Temperature, TFM, DurasanSg4040CFC 4.0" X 40", High TemperatureSg8040CZH 8.0" X 40", High Temperature, TFM, Durasan

Microfiltration ElementseW4025T-1124 4.0" X 25", Polysulfone, Tape

eW4040T 4.0" X 40", Polysulfone, TapeeW4040F 4.0" X 40", Polysulfone, FiberglasseW8040F 8.0" X 40", Polysulfone, Fiberglass

Nanofiltration ElementsHL2540FF 2.5" X 40", TFM, FiberglassHL4040F 4.0" X 40", TFM, Fiberglass

HL4040FF 4.0" X 40", TFM, FiberglassHL8040FF 8.0" X 40", TFM, Fiberglass

Ultrafiltration ElementsPW4025T 4.0" X 25", Polyethersulfone, TapePW4040T 4.0" X 40", Polyethersulfone, TapePW4040F 4.0" X 40", Polyethersulfone, FiberglassPW8040F 8.0" X 25", Polyethersulfone, Fiberglass

Process PiPing & Fittings

Process PiPing & Fittings

35

PR

OC

ES

S P

IPIN

G &

FIT

TIN

GS

PR

OC

ES

S P

IPIN

G &

FIT

TIN

GS

PVC 80 F IT TINGSPART

NumbER SIZE (IN.)

Tee (S x S x FPT) 802-005 1/2

802-007 3/4

802-010 1

802-015 1 1/2

802-020 2

Tee (FPT x FPT x FPT) 805-002 1/4

805-003 3/8

805-005 1/2

805-007 3/4

805-010 1

805-012 1 1/4

805-015 1 1/2

805-020 2


NumbER SIZE (IN.)

Tee (S x S x S) 801-002 1/4

801-003 3/8

801-005 1/2

801-007 3/4

801-010 1

801-012 1 1/4

801-015 1 1/2

801-020 2

Reducing Tee (S x S x S) 801-072FB 1/2 x 1/4

801-101 3/4 x 1/2

801-130 1 x 1/2

801-131 1 x 3/4

801-168 1 1/4 x 1

801-209 1 1/2 x 1/2

801-210 1 1/2 x 3/4

801-211 1 1/2 x 1

Polyvinyl Chloride (PVC) is the most commonly used plastic material for manufacturing plastic pipe. It has a relatively high tensile strength and modulus of elasticity and, therefore, is stronger and more rigid than most other thermoplastics. Joining methods are by solvent cementing, threading (Schedule 80 only) or flanging. PVC has been used successfully in such areas as chemical processing, industrial plating, chilled water distribution, salt water, chemical drainage, and irrigation systems.

SpecificationsConforms to ASTM D-1785, Type 1, Grade1.Conforms to U.S. Product Standard PS 21-70

(supersedes U.S. Commercial Standard CS 207-60 as having the same O.D. dimensions as iron pipe).

NSF approved for pipe sizes 1/2” - 12” for use in potable water service.

Standard length: 20 feet.Handles temperatures up to 140°F.Not affected by soil in buried applications; requires

water-based latex paint for outdoor, sunlight-exposed installations.

Economical to install and maintain.Not recommended for Compressed Air or Gases.

36

PR

OC

ES

S P

IPIN

G &

FIT

TIN

GS

800-268-5035 / 800-268-0032 (Quebec) / www.mcpur.com / mAR COR PuRIFICATION

PVC 80 PIPE

PVC 80 FITTINGSSpecificationsType 1, Grade 1 (Cell Class 12454-B) meets ASTM D-1784.Approved by (NSF) for use with potable cold water.Meets ASTM D-2464 (threaded fittings).Meets ASTM D-2467 (socket fittings).PTFE tape prevents galling of threaded fittings and is required

for leak-tight threaded joints.Colour: Gray.Not recommended for Compressed Air or Gases.

PVC Schedule 80 Pipe & Fittings

PVC PIPE

PARTNumbER

mAXImum SIZE (IN.)

WALL THICKNESS (IN.)

800-005 1/2 .147

800-007 3/4 .154

800-010 1 .179

800-012 1 1/4 .191

800-015 1 1/2 .200

800-020 2 .218

800-025 2 1/2 .276

800-030 3 .300


NumbER SIZE (IN.)

Reducing Coupling (S x S) 829-101 3/4 x 1/2

829-130 1 x 1/2

829-131 1 x 3/4

829-168 1 1/4 x 1

829-209FB 1 1/2 x 1/2

829-210 1 1/2 x 3/4

829-211 1 1/2 x 1

829-212 1 1/2 x 1 1/4

Coupling (FPT x FPT) 830-002 1/4

830-003 3/8

830-005 1/2

830-007 3/4

830-010 1

830-012 1 1/4

830-015 1 1/2

830-020 2

Reducing Coupling (FPT x FPT) 830-052 3/8 x 1/4

830-072 1/2 x 1/4

830-073 1/2 x 3/8

830-101 3/4 x 1/2

830-130 1 x 1/2

830-131 1 x 3/4

830-167 1 1/4 x 3/4

830-211 1 1/2 x 1

Female Adapter (S x FPT) 835-002 1/4

835-003 3/8

835-005 1/2

835-007 3/4

835-010 1

835-012 1 1/4

835-015 1 1/2

835-020 2

Male Adapter (S x MPT) 836-005 1/2

836-007 3/4

836-010 1

836-012 1 1/4

836-015 1 1/2

836-020 2


NumbER SIZE (IN.)

90° Ell (S x S) 806-002 1/4

806-003 3/8

806-005 1/2

806-007 3/4

806-010 1

806-012 1 1/4

806-015 1 1/2

806-020 2

90° Ell (S x FPT) 807-005 1/2

807-007 3/4

807-010 1

807-012 1 1/4

807-015 1 1/2

807-020 2

90° Ell (FPT x FPT) 808-002 1/4

808-003 3/8

808-005 1/2

808-007 3/4

808-010 1

808-012 1 1/4

808-015 1 1/2

808-020 2

45° Ell (S x S) 817-002 1/4

817-003 3/8

817-005 1/2

817-007 3/4

817-010 1

817-012 1 1/4

817-015 1 1/2

817-020 2

45° Ell (FPT x FPT) 819-002 1/4

819-003 3/8

819-005 1/2

819-007 3/4

819-010 1

819-012 1 1/4

819-015 1 1/2

819-020 2

Coupling (S x S) 829-002 1/4

829-003 3/8

829-005 1/2

829-007 3/4

829-010 1

829-012 1 1/4

829-015 1 1/2

829-020 2

37

PR

OC

ES

S P

IPIN

G &

FIT

TIN

GS

mAR COR PuRIFICATION / www.mcpur.com / 800-268-5035 / 800-268-0032 (Quebec)

PVC 80 FITTINGS

PVC Schedule 80 Pipe & Fittings


NumbER SIZE (IN.)

Reducer Bushing (Spg x S) 837-168 1 1/4 x 1

(continued) 837-209 1 1/2 x 1/2

837-210 1 1/2 x 3/4

837-211 1 1/2 x 1

837-212 1 1/2 x 1 1/4

837-247 2 x 1/2

Reducer Bushing (Spg x FPT) 838-052E 3/8 x 1/4

838-072 1/2 x 1/4

838-073 1/2 x 3/8

838-098 3/4 x 1/4

838-101 3/4 x 1/2

838-130 1 x 1/2

838-131 1 x 3/4

838-166 1 1/4 x 1/2

838-167 1 1/4 x 3/4

838-168 1 1/4 x 1

838-209 1 1/2 x 1/2

838-210 1 1/2 x 3/4

838-211 1 1/2 x 1

838-212 1 1/2 x 1 1/4

838-247 2 x 1/2

Reducer Bushing (MPT x FPT) 839-052 3/8 x 1/4

839-072 1/2 x 1/4

839-073 1/2 x 3/8

839-098 3/4 x 1/4

839-099 3/4 x 3/8

839-101 3/4 x 1/2

839-128 1 x 1/4

839-130 1 x 1/2

839-131 1 x 3/4

839-166 1 1/4 x 1/2

839-167 1 1/4 x 3/4

839-168 1 1/4 x 1

839-210 1 1/2 x 3/4

839-211 1 1/2 x 1

839-212 1 1/2 x 1 1/4

839-247 2 x 1/2


NumbER SIZE (IN.)

Cap (S) 847-002 1/4

847-003 3/8

847-005 1/2

847-007 3/4

847-010 1

847-012 1 1/4

847-015 1 1/2

847-020 2

Cap (FPT) 848-002 1/4

848-003 3/8

848-005 1/2

848-007 3/4

848-010 1

848-012 1 1/4

848-015 1 1/2

848-020 2

Plug (MPT) 850-002 1/4

850-003 3/8

850-005 1/2

850-007 3/4

850-010 1

850-012 1 1/4

850-015 1 1/2

850-020 2

Union (S x S) 897-002 1/4

897-003 3/8

897-005 1/2

897-007 3/4

897-010 1

897-012 1 1/4

897-015 1 1/2

897-020 2

Union (FPT X FPT) 898-002 1/4

898-003 3/8

898-005 1/2

898-007 3/4

898-010 1

898-012 1 1/4

898-015 1 1/2

898-020 2

Reducer Bushing (Spg x S) 837-072 1/2 x 1/4

837-073 1/2 x 3/8

837-101 3/4 x 1/2

837-130 1 x 1/2

837-131 1 x 3/4

837-166 1 1/4 x 1/2

837-167 1 1/4 x 3/4

38

PR

OC

ES

S P

IPIN

G &

FIT

TIN

GS


PVC Schedule 80 Pipe & Fittings PVC 80 FITTINGS


NumbER SIZE (IN.)

1/2” Nipples (MPT x MPT) 847-002 1/4

847-003 3/8

847-005 1/2

847-007 3/4

847-010 1

847-012 1 1/4

847-015 1 1/2

847-020 2

3/4” Nipples (MPT x MPT) 848-002 1/4

848-003 3/8

848-005 1/2

848-007 3/4

848-010 1

848-012 1 1/4

848-015 1 1/2

848-020 2

1” Nipples (MPT x MPT) 850-002 1/4

850-003 3/8

850-005 1/2

850-007 3/4

850-010 1

850-012 1 1/4

850-015 1 1/2

850-020 2

1 1/4” Nipples (MPT x MPT) 897-002 1/4

897-003 3/8

897-005 1/2

897-007 3/4

897-010 1

897-012 1 1/4

897-015 1 1/2

897-020 2


NumbER SIZE (IN.)

1 1/2” Nipples (MPT x MPT) 847-002 1/4

847-003 3/8

847-005 1/2

847-007 3/4

847-010 1

847-012 1 1/4

847-015 1 1/2

847-020 2

2” Nipples (MPT x MPT) 848-002 1/4

848-003 3/8

848-005 1/2

848-007 3/4

848-010 1

848-012 1 1/4

848-015 1 1/2

848-020 2

39

PR

OC

ES

S P

IPIN

G &

FIT

TIN

GS

mAR COR PuRIFICATION / www.mcpur.com / 800-268-5035 / 800-268-0032 (Quebec)

PVC Schedule 80 Pipe & Fittings PVC 80 FITTINGS

Key to Abbreviations

S = Socket

FPT = Female Thread

mPT = Male Thread

SPg = Spigot

ID = Inside Diameter

OD = Outside Diameter

40

PR

OC

ES

S P

IPIN

G &

FIT

TIN

GS


ValVesValVes

41

Va

lV

es

42

Va

lV

es

800-268-5035 / 800-268-0032 (Quebec) / www.mcpur.com / Mar Cor PurifiCation

true union Ball Valves

The Chemline Type 21 True Union Ball valve incorporates state of the art features and performance. This is a full port, full blocking True Union valve pressure rated at 16 bar (230 psi)4. Double stem o-rings are provided for safety. Pneumatic or electric actuator mounting is easily accomplished in the field – Just pull off the handle to reveal an integral ISO mounting platform. Optional threaded inserts in the base are available for anchoring the valve.

features and Benefits• Pressure rated to 230 psi• Integral Actuator Mounting Platform• High capacity and low pressure drops• Fully Blocking• Built-In Spanner Wrench• Safety Shear Stem Design• Designed to hold full pressure even if stem breaks due to excessive torque• High Chemical Resistant Material• PVC and CPVC compounds have “A” chemical resistance rating as per ASTM D-1784.

CheMline ® - tyPe 21

Caution:Never remove valve from pipeline under pressure.Always wear protective gloves and goggles.Watch out for trapped fluid in valve. It is safe to close valve before removing it from the pipeline.

georg fisCher ® - tyPe 546Manual, 2-way, full port ball valve provides long working life and maintenance-free performance. True union permits radial installation or removal. Access to all components (ball, stem, seats and seals) is provided by removal of the left hand threaded seat carrier. The ergonomic handle has a molded-in wrench to engage the seat carrier.

features and Benefits• Size range 3/8”-4”• Available in PVC and CPVC with solvent cement, threaded, and flanged end connections standard• Available in PP and PVDF with threaded, spigot, fusion socket, and flanged end connections standard• EPDM and FPM seals and PTFE ball seats standard• 232 psi rating for PVC, CPVC, PVDF socket• ASTM 1970-01 compliant end connections• Union nuts with strong buttress threads• Seat carrier with fine pitched thread for precise adjustment

C H E M l I n E T y P E 21 B A l l VA lV E SPart ProDuCt

nuMBer DesCriPtion

21A005EC 1/2 PVC Type 21 TU Ball Valve

21A007EC 3/4 PVC Type 21 TU Ball Valve

21A010EC 1 PVC Type 21 TU Ball Valve

21A015EC 1-1/2 PVC Type 21 TU Ball Valve

21A020EC 2 PVC Type 21 TU Ball Valve

21A030ES 3 PVC Type 21 TU Ball Valve

G F T y P E 546 B A l l VA lV E SPart ProDuCt Dn Psi Closest

nuMBer DesCriPtion inCh

167546442 25 mm Type 546 Ball Valve PROGEF Standard 20 mm 150 3/4”

167546446 50 mm Type 546 Ball Valve PROGEF Standard 40 mm 150 1-1/2”

167546447 63 mm Type 546 Ball Valve PROGEF Standard 50 mm 150 2”

167546444 32 mm Type 546 Ball Valve PROGEF Standard 25 mm 150 1”

167546445 40 mm Type 546 Ball Valve PROGEF Standard 32 mm 150 1-1/4”

167546442 20 mm Type 546 Ball Valve PROGEF Standard 15 mm 150 1/2”

C H E M l I n E T y P E 21 B A l l VA lV E SPart ProDuCt

nuMBer DesCriPtion

57A020AEl 2 Type 57 PVC Butterfly Valve

43

Va

lV

es

Mar Cor PurifiCation / www.mcpur.com / 800-268-5035 / 800-268-0032 (Quebec)

elastomer seated Butterfly Valves

Chemline elastomer seated butterfly valves up to 24” have been improved. The new Type 57 replaces Type 56 up to 14”. Type 57 body, disc and seat have been redesigned to offer better flow characteristics and lower torques. Stem torques are unaffected by excessive flange bolt torques. Economical valve for basic water applications.

features and BenefitsCompact and light WeightHigh Corrosion ResistanceAbrasion ResistantEasy Actuator MountingEasily InstalledBetter SealingBetter FlowProtection against Flange Bolt Over Tighteningnarrow Body Type 57-IS

CheMline ® - Butterfly ValVes

44

Va

lV

es


CheMline ® - Ball CheCk ValVesThe economical and versatile Chemline Ball Check Valve is the most popular type of non-return valves for pipe sizes under 6”. A wide selection of body and seat materials, and end connections are available for many different applications. It has good flow capacity and will handle many slurry and suspended solid services. This valve works in both horizontal and vertical lines. The Foot Valve is for end of line services such as sumps.

features and Benefits• Built-in Union Design – For easy installation and maintenance• Free Floating Ball – The only moving part• Uniseat/Seal – Easily removable• May be used either horizontally or vertically• Excellent flow characteristics• low seating and opening pressures

true union Ball Check Valves

C H E M l I n E B A l l C H E C K VA lV E SPart ProDuCt

nuMBer DesCriPtion

BTA005EC 1/2 PVC TU Ball Check Valve

BTA007EC 3/4 PVC Tu Ball Check Valve

BTA010EC 1 PVC TU Ball Check Valve

BTA015EC 1-1/2 PVC TU Ball Check Valve

BTA020EC 2 PVC TU Ball Check Valve

45

Va

lV

es


Variable area flow Meters CheMline ® - CoMPaCt siZe VariaBle area flow MetersChemline F Series Variable Area Flow Meters are ideal for plastic piping. They provide a combination of accurate visual flow rate measurement and clear flow indication from a distance. Optional limit switches allow the units to signal a low or high flow alarm. An optional flow transmitter provides a 4 to 20 mA signal output. These flow meters must be installed vertically with flow upward.

features and Benefits• Clear Visual Indication• Easy Installation and Maintenance• Choice of Four Tube Materials for Many Applications:

• Clear PVC – For Water or Chemicals up to 60ºC (140ºF)• Polyamide (PA) – For Water or Air up to 75ºC (167ºF) • Polysulfone (PSU) – For Chemicals and Gases up to 100ºC (212ºF) • PVDF 2 – For Chemicals and Ultrapure fluids up to 110ºC (230ºF)

• Ideal for All Types of Plastic Piping• low Pressure Drop• Good Measuring Accuracy – Class IV• non Fouling

C H E M l I n E CO M PAC T S I Z E VA R I A B l E F lO W M E T E R SenD iteM nuMBer flow range (water) DiMension (inChes) Pressure

ConneCtor PVC PolyaMiDe Polysulfone usgPM liters Per hour a l2 D DroP (Psi)1

siZe tuBe tuBe tuBe water airfC series – CoMPaCt siZe – 7” sCale

3/8”

FCA00020 FCT00020 FCP00020 0.0132 – 0.106 3 – 24 6.5 8.2 1.38 0.05 0.07FCA00060 FCT00060 FCP00060 0.022 – 0.264 5 – 60 6.5 8.2 1.38 0.05 0.07FCA00100 FCT00100 FCP00100 0.04 – 0.44 10 – 100 6.5 8.2 1.38 0.05 0.07FCA00250 FCT00250 FCP00250 0.11 – 1.10 25 – 250 6.5 8.2 1.38 0.05 0.07

1/2”

FCA00051 FCT00051 FCP00051 0.02 – 0.22 5 – 50 6.69 8.7 1.69 0.04 0.06FCA00151 FCT00151 FCP00151 0.07 – 0.66 15 – 150 6.69 8.7 1.69 0.04 0.06FCA00251 FCT00251 FCP00251 0.11 – 1.10 25 – 250 6.69 8.7 1.69 0.04 0.06FCA00401 FCT00401 FCP00401 0.18 – 1.76 40 – 400 6.69 8.7 1.69 0.04 0.06

3/4”

FCA00152 FCT00152 FCP00152 0.07 – 0.66 15 – 150 7.28 9.6 2.09 0.09 0.12FCA00402 FCT00402 FCP00402 0.22 – 1.76 40 – 400 7.28 9.6 2.09 0.09 0.12FCA00602 FCT00602 FCP00602 0.26 – 2.64 60 – 600 7.28 9.6 2.09 0.09 0.12FCA01002 FCT01002 FCP01002 0.44 – 4.40 100 – 1,000 7.28 9.6 2.09 0.09 0.12

1”

FCA00253 FCT00253 FCP00253 0.11 – 1.10 25 – 250 7.87 10.5 2.36 0.09 0.12FCA00403 FCT00403 FCP00403 0.18 – 1.76 40 – 400 7.87 10.5 2.36 0.09 0.12FCA01003 FCT01003 FCP01003 0.44 – 4.40 100 – 1,000 7.87 10.5 2.36 0.09 0.12FCA01503 FCT01503 FCP01503 0.66 – 6.60 150 – 1,500 7.87 10.5 2.36 0.09 0.12

C H E M l I n E CO M PAC T S I Z E VA R I A B l E F lO W M E T E R S - G A S F lO Wflow Meter norMal stanDarD

iteM no. M3/hr CfMfC series – CoMPaCt siZe – 7” sCale

FCT00020 0.2 – 1.0 0.1 – 0.6FCT00060 0.2 – 2.5 0.1 – 1.5FCT00100 0.6 – 3.6 0.4 – 2.1FCT00250 0.5 – 9.0 0.3 – 5.3FCT00051 0.4 – 2.8 0.2 – 1.6FCT00151 0.8 – 6.2 0.5 – 3.6FCT00251 0.9 – 9.5 0.5 – 5.6FCT00401 2.0 – 15.0 1.2 – 8.8FCT00152 0.5 – 5.5 0.3 – 3.2FCT00402 2.0 – 14.0 1.2 – 8.2FCT00602 2.5 – 22.0 1.5 – 12.9FCT01002 4.0 – 34.0 2.4 – 20.0FCT00253 1.0 – 8.0 0.6 – 4.7FCT00403 2.0 – 14.0 1.2 – 8.2FCT01003 4.0 – 34.0 2.4 – 20.0FCT01503 5.0 – 50.0 2.9 – 29.4

46

Va

lV

es


C H E M l I n E S TA n DA R D S I Z E VA R I A B l E F lO W M E T E R S - G A S F lO Wflow Meter norMal stanDarD

iteM no. M3/hr CfMfs series – stanDarD full siZe – 7” sCale

FST00150 0.7 – 5.5 0.4 – 3.2

FST00300 1 – 10 0.6 – 5.9

FST00600 2.5 – 20 1.5 – 12

FST01000 4 – 34 2.4 – 20

FST01500 5 – 50 2.9 – 29

FST02000 8.5 – 76 5.0 – 45

FST02500 8 – 70 4.7 – 41

FST03000 10 – 90 5.9 – 53

FST04000 14 – 125 8.2 – 74

FST06000 22 – 190 13 – 112

FST10000 35 – 300 21 – 177

FST15000 50 – 500 29 – 294

FST25000 80 – 720 47 – 424

FST50000 400 – 1,500 234 – 883

Variable area flow Meters

Chemline F Series Variable Area Flow Meters are ideal for plastic piping. They provide a combination of accurate visual flow rate measurement and clear flow indication from a distance. Optional limit switches allow the units to signal a low or high flow alarm. An optional flow transmitter provides a 4 to 20 mA signal output. These flow meters must be installed vertically with flow upward.

features and Benefits• Clear Visual Indication• Easy Installation and Maintenance• Choice of Four Tube Materials for Many Applications:

• Clear PVC – For Water or Chemicals up to 60ºC (140ºF)• Polyamide (PA) – For Water or Air up to 75ºC (167ºF) • Polysulfone (PSU) – For Chemicals and Gases up to 100ºC (212ºF) • PVDF 2 – For Chemicals and Ultrapure fluids up to 110ºC (230ºF)

• Ideal for All Types of Plastic Piping• low Pressure Drop• Good Measuring Accuracy – Class IV• non Fouling

CheMline ® - stanDarD siZe VariaBle area flow Meters

C H E M l I n E S TA n DA R D S I Z E VA R I A B l E F lO W M E T E R SenD iteM nuMBer flow range (water) DiMension (inChes) Pressure

ConneCtor PVC PolyaMiDe Polysulfone usgPM liters Per hour a l2 D DroP (Psi)1

siZe tuBe tuBe tuBe water airfs series – stanDarD full siZe – 7” sCale

1”

FSA00150 FST00150 FSP00150 0.07 – 0.66 15 – 150 13.78 16.3 2.36 0.18 0.23

FSA00300 FST00300 FSP00300 0.13 – 1.32 30 – 300 13.78 16.3 2.36 0.18 0.23

FSA00600 FST00600 FSP00600 0.26 – 2.64 60 – 600 13.78 16.3 2.36 0.18 0.23

FSA01000 FST01000 FSP01000 0.44 – 4.40 100 – 1,000 13.78 16.3 2.36 0.18 0.23

1-1/4”FSA01500 FST01500 FSP01500 0.66 – 6.60 150 – 1,500 13.78 16.6 2.83 0.18 0.23

FSA02500 FST02500 FSP02500 1.10 – 11.00 250 – 2,500 13.78 16.6 2.83 0.18 0.23

1-1/2”FSA02000 FST02000 FSP02000 0.88 – 8.80 200 – 2,000 13.78 16.8 3.27 0.18 0.23

FSA03000 FST03000 FSP03000 1.32 – 13.20 300 – 3,000 13.78 16.8 3.27 0.18 0.23

2

FSA04000 FST04000 FSP04000 1.76 – 17.60 400 – 4,000 13.78 17.2 4.06 0.32 0.39

FSA06000 FST06000 FSP06000 2.64 – 26.40 600 – 6,000 13.78 17.2 4.06 0.32 0.39

FSA10000 FST10000 FSP10000 4.40 - 44.00 1,000 - 10,000 13.78 17.2 4.06 0.32 0.39

2-1/2”

FSA15000 FST15000 FSP15000 6.60 – 66.00 1,500 – 15,000 13.78 17.7 4.8 0.49 0.58

FSA25000 FST25000 FSP25000 11.00 – 110.00 2,500 – 25,000 13.78 17.7 4.8 0.49 0.58

FSA50000 FST50000 FSP50000 44.00 – 220.00 10,000 – 50,000 13.78 17.7 4.8 0.49 0.58

47

Va

lV

es


Back Pressure/ relief Valves

The Chemline SB Series Back Pressure/Relief Valve has two functions. As a back pressure valve, installed in-line downstream of a pump, the back pressure below the metering pump is maintained. When installed in the branch of a tee it is a pressure relief valve. The valve stays closed until inlet pressure reaches the set pressure which is adjusted by turning the spring tensioning bolt. Inlet pressure acts on the Teflon®control diaphragm opening the valve, allowing excess pressure to flow downwards through the orifice. The SB10/11 Series is very sensitive to pressure changes and requires low overpressure to fully open. It is designed for clean fluids only.

features and Benefits• True Union Ends• Easy installation and maintenance• long Cycling life• Teflon® bonded EPDM Dynamic seal• Designed for Superior Performance• Valves are hydraulically designed for low hysteresis• low overpressure to fully open• Sensitive to pressure changes

specificationsset Pressure ranges:• SB10 – 3 to 60 psi• SB11 – 7 to 150 psiMaximum Viscosity:• 120cP is maximum recommended service viscosity

CheMline ® - sB 10/11 series BaCk Pressure/ relief ValVes

C H E M l I n E B AC K P R E S S U R E / R E l I E F VA lV E SPart ProDuCt

nuMBer DesCriPtion

SB10A005VU 1/2 SB10 PRES RElIEF VlV PVC/VITOn

SB10B010VU 1 SB10 PRES RElIEF VlV PP/VITOn


SB11A007EU 3/4 SB11 PRES RElIEF VlV PVC/EPDM


SB11A010EU 1 SB11 PRES RElIEF VlV PVC/EPDM

SB11A010VU 1 SB11 PRES RElIEF VlV PVC/VITOn

SB11A015EU 1-1/2 SB11 PRES RElIEF VlV PVC/EPDM

SB11A015VU 1-1/2 SB11 PRES RElIEF VlV PVC/VIT

SB11B005EU 1/2 SB11 PRES RElIEF VlV PP/EPDM

SB11B005V 1/2 SB11 PRES RElIEF VlV PP/VITOn

SB11B005VU 1/2 SB11 PRES RElIEF VlV PP/VITOn

SB11B007EU 3/4 SB11 PRES RElIEF VlV PP/EPDM

SB11B007VU 3/4 SB11 PRES RElIEF VlV PP/VITOn

SB11B010EU 1 SB11 PRES RElIEF VlV PP/EPDM


SB11B010VUT 1 SB11 PRES RElIEF VlV PP/VITOn

SB11B012EU 1-1/4 SB11 PRES RElIEF VlV PP/EPDM


48

Va

lV

es


CheMline ® - lsflo liMit reeD switCh

The lSFlO reed limit switch serves as a switch for minimum and maximum or optional intermediate flow values. The contact is closed as soon as the magnetic float moves up from below or is at the direct height of the switch. When exceeding the switch, the switched condition is maintained. Only when moving down below the switch the switching status will be cancelled.

features and Benefits• Flow range (height position = signal value) optional setting position.• Fixed with a dovetail guide clamping piece to the measuring capillary.• Simple, reliable installation on existing installations, easy to retrofit

limit reed switch

C H E M l I n E B A l l C H E C K VA lV E SPart ProDuCt

nuMBer DesCriPtion

lSFlO limit Switch, normally Open

CheMline ® - lCs series laB CoCks

Chemline lC Series lab Cocks are rugged quarter turn mini ball valves. Theyare ideal for general use in instrumentation lines, available at a fraction of thecost of comparable stainless steel valves. Other applications include air lines foraquaculture, for venting gas in pipe lines, process sampling and laboratory use.

features and Benefits• low Cost• nSF 61 Certified1• Heavy Stems – Rugged construction• 1/4” Full Bore – low pressure drop• Graduation Marks – For flow control

lab Cocks

C H E M l I n E - lC S S E R I E S l A B CO C K SPart ProDuCt length

nuMBer DesCriPtion (CM)

lCTHE 1/4” Male Thread x 3/8” ID Hose, EPDM 3.48

lCFTE 1/4” Female Threaded, EPDM 2.80

lCMTE 1/4” Male Threaded, EPDM 2.60

lCHHE 3/8” ID Hose x Hose, EPDM 4.37

lCTHV 1/4” Male Thread x 3/8” ID Hose, VITOn 3.48

lCFTV 1/4” Female Threaded, VITOn 2.80

lCMTE 1/4” Male Threaded, VITOn 2.60

lCHHV 3/8” ID Hose x Hose, VITOn 4.37

1PVC valves with EPDM or FKM (Viton®) seals are certified under nSF/AnSI Standard 61 for contact with drinking water.

PumPsPumPs

49

pu

mp

s

C H I S E R I E S P U M P S - 60 H Z

pARTNumbeR

NOmINALHp VOLTs pHAse suCTION

pORTDIsCHARGe

pORTsHIp

WT(Lbs.)FLOW (Gpm)

HeAD (psI)

CHI2-40 10 60 0.75 115/230 1 1” NPT 1” NPT 31CHI2-40 10 60 0.75 208-230/460 3 1” NPT 1” NPT 31CHI2-50 10 70 0.75 115/230 1 1” NPT 1” NPT 32CHI2-50 10 70 0.75 208-230/460 3 1” NPT 1” NPT 32CHI2-60 10 80 1 115/230 1 1” NPT 1” NPT 36CHI2-60 10 80 1 208-230/460 3 1” NPT 1” NPT 36CHI4-30 15 50 0.75 115/230 1 1-1/4” NPT 1-1/4” NPT 31CHI4-40 15 70 1 115/230 1 1-1/4” NPT 1-1/4” NPT 34CHI4-40 15 70 1 208-230/460 3 1-1/4” NPT 1-1/4” NPT 34CHI4-50 15 90 1.5 208-230/460 3 1-1/4” NPT 1-1/4” NPT 59CHI8-20 25 60 1.5 208-230/460 3 1-1/2” NPT 1-1/2” NPT 36

CHI12-15 30 60 2 208-230/460 3 1-1/2” NPT 1-1/2” NPT 52

C H I S E R I E S P U M P S - 60 H Z

pARTNumbeR


pORTDIsCHARGe

pORTsHIp

WT(Lbs.)FLOW (Gpm)

HeAD (psI)

CHIE4-60 15 72 1.5 208-230 1 1-1/4” NPT 1-1/4” NPT 62CHIE8-20 25 40 1.5 208-230 1 1-1/2” NPT 1-1/2” NPT 41

C H I - P LU S S E R I E S P U M P S - 60 H Z

pARTNumbeR


pORTDIsCHARGe

pORTsHIp

WT(Lbs.)FLOW (Gpm)

HeAD (psI)

CHIE2-40+ 10 60 1 208-230 1 1” NPT 1” NPT 36CHIE2-60+ 10 85 1.5 208-230 1 1” NPT 1” NPT 43CHIE4-10+ 15 15 0.5 208-230 1 1-1/4” NPT 1-1/4” NPT 32CHIE4-20+ 15 40 1 208-230 1 1-1/4” NPT 1-1/4” NPT 36CHIE4-60+ 15 72 1.5 208-230 1 1-1/4” NPT 1-1/4” NPT 62CHIE8-20+ 25 40 1.5 208-230 1 1-1/2” NPT 1-1/2” NPT 41

50

pu

mp

s

800-268-5035 / 800-268-0032 (Quebec) / www.mcpur.com / mAR COR puRIFICATION

Grundfos® pumps Centrifugal

CHI AND CHIe seRIesThe CHI is a multistage centrifugal pump. The CHIE is a multistage centrifugal pump that is electronically controlled with a MLE motor and built-in-PI-controller. The CHIE are the ideal solution in a number of applications characterized by a need for variable flow (VFD) at constant pressure. The CHIE-Plus incorporates a pressure sensor and a small diaphragm tank to complete a compact pressure booster system supplying constant pressure.

Applications• Watertreatment• Industrialwashingsystems• Pressureboostingofprocesswater• Heatingandcoolinginindustrial

processes• Humidification(softenedwater)

Features and benefits• Corrosion-resistant,316stainlesssteel

liquid parts• Compactdesign• Widerange• Suitableforslightlyaggressiveliquids• Lownoise

specifications*Flow Range: 1.2 to 70 gpmHead Range: 0 to 265 ftOperating Pressure: max. 145 psi (10 bar)Liquid Temperature: +5°F to 248°F (-15°C to +120°C)Motor Type: TEFC (Totally Enclosed Fan Cooled)

* CHIE-Plus:Liquid Temperature: max. +176°F (80°C) Operating Pressure: 125 psi (8.6 bar)

Note: Grundfos CRN Series available. (Please contact us with your request).

WEBTROLPUMPS - 60 HZ

pARTNumbeR

NOmINALI/O pORT(INCHes) Hp VOLTs pHAse mOTOR TYpeFLOW

(Gpm)HeAD (psI)

H5B7S16M 5 70 1-1/2 NPT 0.75 115/230 1 ODPH15B9S16M 15 65 1-1/2 NPT 1.5 115/230 1 ODPH20B6S16M 20 45 1-1/2 NPT 1 115/230 1 ODPH20B9S16M 20 75 1-1/2 NPT 1.5 115/230 1 ODPH35B6S16M 35 30 1-1/2 NPT 1.5 115/230 1 ODP

51

pu

mp

s

mAR COR puRIFICATION / www.mcpur.com / 800-268-5035 / 800-268-0032 (Quebec)

Webtrol pumps booster

eZ seRIesFeatures and benefits• IdealforReverseOsmosisandDeionizationwaterapplications.• Alllistedmodelsareconstructedof316StainlessSteel.• Heavydutystainlesssteelhexshaftwithstainlesssteelcoupling.• Highstrength,glassfilledDelrinorNorylthermoplasticimpellers,precision

machined for dimensional stability and efficiency.• InjectionmoldedpolycarbonateorNoryldiffuserswithmoldedinstainless

steel wear rings at all critical wear points.• Heavywallstainlesssteelpumphousing.

C M S E R I E S P U M P S - 60 H Z

pARTNumbeR

NOmINALHp VOLTs suCTION

pORTDIsCHARGe

pORTsHIp

WT(Lbs.)FLOW (Gpm)

HeAD (psI)

CM1-4 5 64 0.75 115/208-230/460/575 1” NPT 1” NPT 31CM3-4 10 67 0.75 115/208-230/460/575 1” NPT 1” NPT 31CM5-4 20 67 0.75 115/208-230/460/575 1” NPT 1 1/4” NPT 32

CM10-2 30 60 0.75 115/208-230/460/575 1 1/2” NPT 1 1/2” NPT 32CM15-2 60 64 1 115/208-230/460/575 2” NPT 2” NPT 36CM25-2 100 62 1 115/208-230/460/575 2” NPT 2” NPT 36

Grundfos® pumps Centrifugal

Cm AND Cme seRIesTheGrundfosCMandCMEpumpsarenon-selfpriming,horizontal,multistage,end-suctioncentrifugal pumps. The pumps are of the close-coupled type. CM pumps are fitted with mains-operated motors whereas the motor for CME pumps has an integrated frequency converter. BothCMandCMEpumpshavemechanicalshaftseals.

Note: Grundfos CRN Series available. (Please contact us with your request).

C M E I S E R I E S P U M P S - 60 H Z

pARTNumbeR

NOmINALHp VOLTs suCTION

pORTDIsCHARGe

pORTsHIp

WT(Lbs.)FLOW (Gpm)

HeAD (psI)

CME1-4 5-10 15-64 0.75 208-230 1” NPT 1” NPT 31CME3-4 10-20 15-67 0.75 208-230 1” NPT 1” NPT 31CME5-4 20-30 15-67 0.75 460-480 1” NPT 1 1/4” NPT 32

CME10-2 30-60 15-60 0.75 460-480 1 1/2” NPT 1 1/2” NPT 32CME15-2 60-100 15-64 1 460-480 2” NPT 2” NPT 36CME25-2 100-140 15-62 1 460-480 1” NPT 1” NPT 36

Features and benefits• Compact Design• WorldwideUsage• High Reliability• Service-Friendly• WidePerformanceRange

Applications• WashingAndCleaning• WaterTreatment• Temperature Control• PressureBoosting

52

pu

mp

s

800-268-5035 / 800-268-0032 (Quebec) / www.mcpur.com / mAR COR puRIFICATION

F LU I D - O - T E C H P U M P S

pART NumbeR bODY mATeRIAL COupLING CONNeCTIONs pRessuRe RANGe FLOW RANGe

PA911F Stainless Steel Direct 1/2" NPT 2-16 bar 897-940 l/hr PA1001F Stainless Steel Direct 1/2" NPT 2-16 bar 997-1040 l/hrTMSS201 Stainless Steel Magnetic 1/2" NPT 2-18 bar 220-240 l/hr

Fluid-o-Tech pumps FLuID-O-TeCH pumpsFeatures and benefits

ROTARYVANEPUMPS–PO&PASERIESThePOandPASeriesofrotaryvanepumpsareavailableinthreedifferentsizesasdefinedbyhousingsize:small,mediumandlarge.Thepumps’advantagesincludeselfpriming,quiet,freeofpulsation,positivedisplacement,andhavealong service life.

ROTARYVANEPUMPS-TMSERIES

The TM Series of rotary vane pumps are available in two different sizes as definedbyhousingsize:small,medium.Thepumps’advantagesincludeselfpriming,almostsilent,freeofpulsation,positivedisplacement,andhaveanextra long service life.

Conditioning /PREtREAtMEnt

EquiPMEnt

Conditioning / PREtREAtMEnt

EquiPMEnt

53

Co

nd

itio

nin

g e

qu

ipm

en

t

a All dimensions stated above include a tripod base and controller head. Measurements are subject to change and are for reference only.b Allow adequate space for the water treatment system and associated piping. A minimum of 4 1/2” front and rear clearance is required for cartridge assembly and removal. Tanks should be installed on a firm, level surface.

tA F m L S e r i e S 1” m u Lt i m e d i A F i Lt e r S

pArt numBer

FLoW deSign

(uSgpm)

mediA VoLume

(Ft3)

BACKWASH FLoW

(uSgpm)

preSSure drop @

peeK (pSig)

mediA tAnKa

d X H (in.)

SHippingWeigHt

(LBS.)

SpACerequirementSb

W X d X H (in.)

TAFML-1047P 7 1.5 8 5 10 x 60 160 12 x 17 x 64TAFML-1252P 12 3 12 6 12 x 67 225 14 x 17 x 70TAFML-1465P 16 4 15 7 14 x 77 380 16 x 17 x 82TAFML-1665P 20 5 20 12 16 x 77 530 18 x 18 x 82

54

Co

nd

itio

nin

g e

qu

ipm

en

t

800-268-5035 / 800-268-0032 (quebec) / www.mcpur.com / mAr Cor puriFiCAtion

Commercial Filtering equipment tAFmL SerieS 1“ muLtimediA FiLterSThe Biolab TAFML 1” Series Multimedia Filter is designed to efficiently remove suspended solids and fine turbidity particles down to 15 micron from incoming water. Our complete system series features the Performa™ valve with standard controller for simple operation and efficient backwashing.

Features and Benefits• Fully automatic backwash• Flow rates up to 20 USgpm• Parallel flow rates up to 40 USgpm• Durable, high quality Multi-layered media• Less then 15 micron filtration• Non-corroding fiberglass tank• Valve constructed of plastic materials• Standard reliable electronic timer

Specifications• Pressure: 20-100 psi (138 - 690 KPA)• Temperature: 35-100º F (2-38º C)• Electrical: 115/60Hz, single phase• Inlet/Outlet: 1.0 inch• Drain: 0.75 inch

tA F m L S e r i e S 2” m u Lt i m e d i A F i Lt e r S

pArt numBer

FLoW deSign

(uSgpm)

mediA VoLume

(Ft3)

BACKWASH FLoW

(uSgpm)

preSSure drop @

peeK (pSig)

mediA tAnKa

d X H (in.)

SHippingWeigHt

(LBS.)

SpACerequirementSb

W X d X H (in.)

TAFML-1865M 25 5 25 5 18 x 92 475 22 x 37 x 96TAFML-2162M 36 7 35 7 21 x 91 675 25 x 37 x 96TAFML-2472M 47 10 45 12 24 x 97 1040 28 x 37 x 104TAFML-3072M 75 15 70 17 30 x 98 1335 34 x 39 x 104

tAFmL SerieS 2“ muLtimediA FiLterSThe Biolab TAFML 2” Series Multimedia Filter is designed to efficiently remove suspended solids and fine turbidity particles down to 15 micron from incoming water. Our complete system series features the Magnum IT™ valve with standard controller for simple operation and efficient backwashing.

Features and Benefits• Fully automatic backwash• Flow rates up to 75 USgpm• Parallel flow rates up to 150 USgpm• Durable, high quality Multi-layered media• Less then 15 micron filtration• Non-corroding fiberglass tank• Valve constructed of plastic materials• Standard reliable electronic timer


a All dimensions stated above include a standard base and controller head.b Allow adequate space for the water treatment system and associated piping. Tanks should be installed on a firm, level surface.

tA F m z S e r i e S 2” S e d i m e n t F i Lt e r S

pArt numBer

FLoW deSign

(uSgpm)

mediA VoLume

(Ft3)

BACKWASH FLoW

(uSgpm)

preSSure drop @

peeK (pSig)

mediA tAnKa

d X H (in.)

SHippingWeigHt

(LBS.)

SpACerequirementSb

W X d X H (in.)

TAFMZ-1865M 25 5 25 3 18 x 92 600 22 x 37 x 96TAFMZ-2162M 40 7 35 7 21 x 91 675 25 x 37 x 96TAFMZ-2472M 50 10 45 12 24 x 97 1040 28 x 37 x 104TAFMZ-3072M 75 15 70 17 30 x 98 1335 34 x 39 x 104

tAFmz SerieS 2“ Sediment FiLterSThe Biolab TAFMZ 2” Series Sediment Filter is designed to efficiently remove suspended solids and fine turbidity particles down to 5 micron from incoming water. Our complete system series features the Magnum IT™ valve with standard controller for simple operation and efficient backwashing.

Features and Benefits• Fully automatic backwash• Flow rates up to 75 USgpm• Parallel flow rates up to 150 USgpm• Durable, high quality Micro ZTM media• Less then 5 micron filtration• Non-corroding fiberglass tank• Valve constructed of plastic materials• Standard reliable electronic timer• Up to 2 x loading capacity compared to standard multimedia (reduced backwash frequency)


tA F m z S e r i e S 1” S e d i m e n t F i Lt e r S

pArt numBer

FLoW deSign

(uSgpm)

mediA VoLume

(Ft3)

BACKWASH FLoW

(uSgpm)

preSSure drop @

peeK (pSig)

mediA tAnKa

d X H (in.)

SHippingWeigHt

(LBS.)

SpACerequirementSb

W X d X H (in.)

TAFMZ-1047P 8 1.5 8 5 10 x 60 160 12 x 17 x 64TAFMZ-1252P 12 2 10 6 12 x 67 225 14 x 17 x 70TAFMZ-1465P 16 3 15 7 14 x 77 380 16 x 17 x 82TAFMZ-1665P 20 4 20 12 16 x 77 530 18 x 18 x 82

Commercial Filtering equipment tAFmz SerieS 1“ Sediment FiLterS The Biolab TAFMZ 1” Series Sediment Filter is designed to efficiently remove suspended solids and fine turbidity particles down to 5 micron from incoming water. Our complete system series features the Performa™ valve with standard controller for simple operation and efficient backwashing.

Features and Benefits• Fully automatic backwash• Flow rates up to 20 USgpm• Parallel flow rates up to 40 USgpm• Durable, high quality Micro ZTM media• Less then 5 micron filtration• Non-corroding fiberglass tank• Valve constructed of plastic materials• Standard reliable electronic timer• Up to 2 x loading capacity compared to standard multimedia (reduced backwash frequency)

Specifications• Pressure: 20-100 psi (138 - 690 KPA)• Temperature: 35-100º F (2-38ºC)• Electrical: 115/60Hz, single phase• Inlet/Outlet: 1.0 inch• Drain: 0.75 inch

55

Co

nd

itio

nin

g e

qu

ipm

en

t

mAr Cor puriFiCAtion / www.mcpur.com / 800-268-5035 / 800-268-0032 (quebec)



tA F S S e r i e S 1” WAt e r S o F t e n e r S

pArt numBer

CApACitYmAXimum

(Kgr)

FLoW deSign

(uSgpm)

reSin VoLume

(Ft3)

BACKWASH FLoW

(uSgpm)

preSSure drop @

peeK (pSig)

SALt perregen(LBS.)

Brine CApACitY

(LBS.)

mediA tAnKa

d X H (in.)

BrinetAnK

W X H (in.)

SHippingWeigHt

(LBS.)

SpACerequirementSb

W X d X H (in.)

TAFS-30P 30 1 - 5 1 2.5 5 10 450 10x60 18x40 150 52x42x75TAFS-45P 45 1.5 - 7.5 1.5 4 7.5 15 450 12x55 18x40 195 54x42x71TAFS-60P 60 2 - 10 2 4 10 20 450 12x67 18x40 245 54x42x81TAFS-90P 90 3 - 15 3 5 15 30 700 14x77 24x40 350 62x48x93

TAFS-120P 120 4 - 20 4 7 20 40 700 16x77 24x40 485 64x48x93TAFS-150P 150 5 - 25 5 9 25 50 700 18x80 24x40 565 66x48x95

Commercial Filtering equipment tAFS SerieS 1“ WAter SoFtenerSThe Biolab TAFS Series 1” Water Softening Systems are designed to remove calcium and magnesium ions from incoming water and replace them with soft sodium ions. Our complete system series features the Performa™ Softener Valve with standard controller for simple operation and efficient regeneration.

Features and Benefits• Fully automatic regeneration• 30,000 to 150,000 grains hardness removal• SIngle unit flow rates up to 25 USgpm• Parallel flow rates up to 50 USgpm• Durable, high quality exchange cation resin• Non-corroding fiberglass tank• Standard reliable electronic timer


tAFS SerieS 2“ WAter SoFtenerSThe Biolab TAFS 2” Series Water Softening Systems are designed to remove calcium and magnesium ions from incoming water and replace them with soft sodium ions. Our complete system series features the Magnum IT™ Softener Valve with standard controller for simple operation and efficient regeneration.

Features and Benefits• Fully automatic regeneration• 150,000 to 600,000 grains hardness removal• Single unit flow rates up to 75 USgpm• Parallel flow rates up to 150 USgpm• Durable, high quality exchange cation resin• Non-corroding fiberglass tank• Standard reliable electronic timer


56

Co

nd

itio

nin

g e

qu

ipm

en

t


tA F S S e r i e S 2” WAt e r S o F t e n e r S

pArt numBer

CApACitYmAXimum

(Kgr)

FLoW deSign

(uSgpm)

reSin VoLume

(Ft3)

BACKWASH FLoW

(uSgpm)

preSSure drop @

peeK (pSig)

SALt perregen(LBS.)

Brine CApACitY

(LBS.)

mediA tAnKa

d X H (in.)

BrinetAnK

W X H (in.)

SHippingWeigHt

(LBS.)

SpACerequirementSb

W X d X H (in.)

TAFS-150M 150 5 - 25 5 9 5 50 700 18x92 24x40 565 66x52x106TAFS-210M 210 7 - 35 7 12 10 70 700 21x91 24x40 625 69x52x105TAFS-300M 300 10 - 50 10 15 15 100 1200 24x97 30x48 870 78x54x112TAFS-450M 450 15 - 75 15 25 20 150 1200 30x98 30x48 1490 84x54x114TAFS-600M 600 20 - 75 20 35 30 200 1200 36x99 30x48 1880 90x60x114

a All dimensions stated above include a standard base and controller head. b For proper serviceability, it is recommended that there be 18” of space around the entire system. A minimum of 12” is required and is included in the Space Requirements. Tanks should be installed on a firm, level surface..

a All dimensions stated above include a tripod base and controller head. Measurements are subject to change and are for reference only.b For proper serviceability, it is recommended that there be 18” of space around the entire system. A minimum of 12” is required and is included in the Space Requirements. Tanks should be installed on a firm, level surface.


tA F C S e r i e S 2” C A r B o n F i Lt e r S

pArt numBer

FLoW CHLorine (uSgpm)

5 min. emptY Bed ContACt

(uSgpm)

mediA VoLume

(Ft3)

BACKWASH FLoW

(uSgpm)

preSSure drop @

peeK (pSig)

mediA tAnKa

d X H (in.)

SHippingWeigHt

(LBS.)

SpACerequirementSb

W X d X H (in.)

TAFC-2162M 21 10 7 25 5 18 x 92 410 22 x 37 x 98TAFC-2472M 30 14 10 30 9 21 x 91 660 25 x 37 x 98TAFC-3072M 45 22 15 50 14 24 x 98 960 28 x 37 x 104TAFC-3672M 60 31 20 70 17 30 x 98 1200 34 x 39 x 105

57

Co

nd

itio

nin

g e

qu

ipm

en

t


Commercial Filtering equipment tAFC SerieS 1“ ACtiVAted CArBon FiLterSThe Biolab TAFC 1” Series Activated Carbon Filters are designed to eliminate colour, odor, and/or toxicity primarily chlorine and chloramines from incoming water. Our complete system series features the Performa™ valve with standard controller for simple operation and efficient backwashing.

Features and Benefits• Fully automatic backwash• Single unit flow rates up to 20 USgpm• Parallel flow rates up to 40 USgpm• High quality activated carbon• Non-corroding fiberglass tank• Valve constructed of plastic materials• Standard reliable electronic timer


tAFC SerieS 2“ ACtiVAted CArBon FiLterSThe Biolab TAFC 2” Series Activated Carbon Filters are designed to eliminate colour, odor, and/or toxicity primarily chlorine and chloramines from incoming water. Our complete system series features the Magnum IT™ valve with standard controller for simple operation and efficient backwashing.

Features and Benefits• Fully automatic backwash• Single unit flow rates up to 20 USgpm• Parallel flow rates up to 40 USgpm• High quality activated carbon• Non-corroding fiberglass tank• Valve constructed of plastic materials• Standard reliable electronic timer


tA F C S e r i e S 1” C A r B o n F i Lt e r S

pArt numBer

FLoW CHLorine (uSgpm)

5 min. emptY Bed ContACt

(uSgpm)

mediA VoLume

(Ft3)

BACKWASH FLoW

(uSgpm)

preSSure drop @

peeK (pSig)

mediA tAnKa

d X H (in.)

SHippingWeigHt

(LBS.)

SpACerequirementSb

W X d X H (in.)

TAFC-1047P 4.5 2 2 6 3 10 x 60 105 12 x 17 x 64TAFC-1252P 6 3 2 8 4 12 x 67 125 14 x 17 x 70TAFC-1465P 9 5 3 10 6 14 x 77 240 16 x 17 x 82TAFC-1665P 12 6 4 15 8 16 x 77 340 18 x 18 x 82TAFC-1865P 15 8 5 20 11 18 x 80 375 20 x 20 x 84TAFC-2162P 20 10 7 25 17 21 x 79 410 23 x 23 x 81


CARBON

pArt numBer

produCt deSCription

Amount (Ft3) ContAiner AppLiCAtion SHip Wt.

(LBS.)

ME50097 Acid-Washed Carbon, Dry 1 Bag Chlorine Removal 2850236359 Catalytic Acid Wash Carbon 1 Bag Chlorine Removal 33

ION EXCHANGE RESIN

pArt numBer

produCt deSCription

Amount (Ft3) ContAiner AppLiCAtion SHip Wt.

(LBS.)

CGS Cation Resin 1 Bag Softening 50MBD15SC Type I Mixed Bed 1 Bag Polishing 50

58

Co

nd

itio

nin

g e

qu

ipm

en

t


Filtering material

ion eXCHAnge reSinMar Cor Purification uses water softening resin that has a high capacity, high quality gel-type cation resin capable of meeting the most exacting requirements of household, farm, commercial, industrial water softeners. It is supplied in the sodium amber coloured translucent beads. The beads are strong and durable ensuring long service life. Mixed bed resins are a combination of cation and anion gel beads which are designed to provide maximum life and operating capacity in a regenerable system. Mixed beds are formulated to maintain a high capacity and excellent water quality over hundreds of exhaustion and regeneration cycles. Our semiconductor grade (SC) mixed bed resin utilizes a type one anion resin and has been rinsed to a TOC level below 50 ppb.

CArBonOne of the most common applications for carbon is for the removal of incoming chlorinated water commonly found in most water supplies. This practice helps to protect reverse osmosis membranes and other filtration equipment not tolerant to large doses of chlorine. It is a key filtering media in many medical applications, including hemodialysis.

With a mesh size of 12 x 40 and an iodine number of at least 1000, we offer the very best in high activity granular carbon. Acid-washed carbon is available to help stabilize pH.

SALT

pArt numBer

produCt deSCription

Amount (Ft3) ContAiner SHip Wt.

(LBS.)

SALT Softener Regenerating Salt 1 Bag 44

SALtFor use in regenerating softeners

59

Co

nd

itio

nin

g e

qu

ipm

en

t


AQUAFINE UV PAR TSpArt

numBerproduCt

deSCription

Lamps18063 Standard, 185 nm Blue - 30” single ended - TOC/Chlorine17498 Standard, 185 nm Blue - 60” single ended - TOC/Chlorine17491 Standard, 254 nm Mauve - 30” single ended - Disinfection / Ozone17998 Standard, 254 nm Mauve - 60” single ended - Disinfection / Ozone18197 Standard HE, 185 nm Violet - 30” single ended - TOC/Chlorine17820 Standard HE, 185 nm Violet - 60” single ended - TOC/Chlorine18198 Standard HE, 254 nm Cyan - 30” single ended - Disinfection / Ozone18024 Standard HE, 254 nm Cyan - 60” single ended - Disinfection / Ozone18062 Validated, 185 nm Yellow - 30” single ended - TOC/Chlorine18061 Validated, 185 nm Yellow - 60” single ended - TOC/Chlorine18059 Validated, 254 nm Green - 30” single ended - Disinfection / Ozone18060 Validated, 254 nm Green - 60” single ended - Disinfection / Ozone18952 Validated HE, 185 nm Orange - 30” single ended - TOC/Chlorine18953 Validated HE, 185 nm Orange - 60” single ended - TOC/Chlorine18950 Validated HE, 254 nm Black - 30” single ended - Disinfection / Ozone18951 Validated HE, 254 nm Black - 60” single ended - Disinfection / Ozone3010 Standard, 254 nm Alum - 12” double ended - Disinfection / Ozone3011 Standard, 254 nm Mauve - 12” double ended - Disinfection / Ozone3050 Standard, 254 nm Mauve - 15” double ended - Disinfection / Ozone3084 Standard, 254 nm Mauve - 30” double ended - Disinfection / Ozone3098 Standard, 254 nm Mauve - 60” double ended - Disinfection / Ozone3087 Standard, 185 nm Blue - 30” double ended - TOC/Chlorine3095 Standard, 185 nm Blue - 60” double ended - TOC/Chlorine

14152 Standard HE, 185 nm Violet - 30” double ended - TOC/Chlorine15966 Standard HE, 185 nm Violet - 60” double ended - TOC/Chlorine

14151 Standard HE, 254 nm Cyan - 30” double ended - Disinfection / Ozone15146 Standard HE, 254 nm Cyan - 60” double ended - Disinfection / Ozone16678 Validated, 185 nm Yellow - 30” double ended - TOC/Chlorine16679 Validated, 185 nm Yellow - 60” double ended - TOC/Chlorine16676 Validated, 254 nm Green - 30” double ended - Disinfection / Ozone16677 Validated, 254 nm Green - 60” double ended - Disinfection / Ozone

Quartz Sleeves3110 Open Ended, Double Ended - 10”3150 Open Ended, Double Ended - 13”3198 Open Ended, Double Ended - 60”3184 Open Ended, Double Ended - 30”

18057 Domed End, Single Ended - 30”19882 Domed End, Single Ended - 30”17751 Domed End, Single Ended - 60”16791 Domed End, Single Ended - 60”18347 Open Ended, Single Ended - 30”18348 Open Ended, Single Ended - 60”

Aquafine® ultraviolet Systems uV puriFier pArtSWe offer a wide variety of replacement parts for numerous types of Aquafine UV units, including a complete line of UV lamps for new and replacement applications. Used for disinfection, TOC reduction, ozone destruction, or chlorine/chloramine destruction, the ColorguardTM UV lamps are designed to maximize the performance of your UV water treatment system. For more information on complete UV system, please contact us.

AQUAFINE UV PAR TS CONTINUEDpArt

numBerproduCt

deSCription

Ballasts3354 MP2-SL, CSL, RBE, SCD - 120V - Magnetic

16518 MP2-SL, CSL, RBE, SCD - 120V - Electronic4035 DW-5, DW-8, SL-10A, SL-1 - 120V - Magnetic

19202 All HE Units 240V40328 All HE Units 240V

Replacement Misc. Parts3118 CSL/RBE - EPDM Gasket, 6”3244 CSL/RBE - EPDM Gasket, 8”4253 All - EPDM O-ring

16458 All - Viton O-ring - (black)4205 Fan - MP-2-SL3901 Fan - CSL, RBE, SCD - 4” 120V

12422 DE 25mm Compression nut (socket lok) - cpvc4252 Standard compression nut cpvc

16184 30” lamp socket18348 Open Ended, Single Ended - 60”

60

Co

nd

itio

nin

g e

qu

ipm

en

t


Aquafine® ultraviolet Systems uV puriFier pArtS

61

Co

nd

itio

nin

g e

qu

ipm

en

t


TROJAN ULTRAVIOLE T PAR TSpArt

numBerproduCt

deSCription

uVmAX models

650388 TrojanUVMax - A4 120V, 60Hz650690 TrojanUVMax - B4 120V, 60Hz650692 TrojanUVMax - C4 120V, 60Hz650694 TrojanUVMax - D4 120V, 60Hz650682 TrojanUVMax - E4 120V, 60Hz650686 TrojanUVMax - F4 120V, 60Hz

PLUS Models are complete with UV Intensity monitors650695 TrojanUVMax - D4 PLUS 120V, 60Hz650683 TrojanUVMax - E4 PLUS 120V, 60Hz650687 TrojanUVMax - F4 PLUS 120V, 60Hz

uVmAX Lamps 602803 Lamp for TrojanUVMax - A602804 Lamp for TrojanUVMax - B602805 Lamp for TrojanUVMax - C/D602806 Lamp for TrojanUVMax - E602807 Lamp for TrojanUVMax - F

uVmAX Sleeves602730 Quartz Sleeve for TrojanUVMax - A602731 Quartz Sleeve for TrojanUVMax - B602732 Quartz Sleeve for TrojanUVMax - C/D602733 Quartz Sleeve for TrojanUVMax - E602734 Quartz Sleeve for TrojanUVMax - F602665 Sleve bolt for TrojanUVMax - all models

uVmAX power Supply650414 Replacement kit for TrojanUVMax - A - 120V

650713-005 Replacement kit for TrojanUVMax - B4 - 120V650716-005 Replacement kit for TrojanUVMax - B - 120V650713-006 Replacement kit for TrojanUVMax - C4 - 120V650716-006 Replacement kit for TrojanUVMax - C - 120V650713-007 Replacement kit for TrojanUVMax - D4 - 120V650716-007 Replacement kit for TrojanUVMax - D - 120V650713-008 Replacement kit for TrojanUVMax - D4 PLUS - 120V650716-008 Replacement kit for TrojanUVMax - D PLUS - 120V650713-001 Replacement kit for TrojanUVMax - E4 - 120V650716-001 Replacement kit for TrojanUVMax - E - 120V650713-002 Replacement kit for TrojanUVMax - E4 PLUS - 120V650716-002 Replacement kit for TrojanUVMax - E PLUS - 120V650716-009 Replacement kit for TrojanUVMax - Pro 7 - 120V650713-003 Replacement kit for TrojanUVMax - F4 - 120V650716-003 Replacement kit for TrojanUVMax - F - 120V650713-004 Replacement kit for TrojanUVMax - F4 PLUS - 120V650716-004 Replacement kit for TrojanUVMax - F PLUS - 120V650716-010 Replacement kit for TrojanUVMax - Pro 15 - 120V

trojan® ultraviolet Systems uV puriFier pArtSWe offer a wide variety of replacement parts for numerous types of Aquafine UV units, including a complete line of UV lamps for new and replacement applications. Used for disinfection, TOC reduction, ozone destruction, or chlorine/chloramine destruction, the ColorguardTM UV lamps are designed to maximize the performance of your UV water treatment system. For more information on complete UV system, please contact us.

62

Co

nd

itio

nin

g e

qu

ipm

en

t


AQUAFINE UV PAR TS CONTINUEDpArt

numBerproduCt

deSCription

uVmAX parts602661 Remote options cord (available for D/E/F models)602636 Power cord for B, C, D, E and F - 120V, 90 degree602662 Lamp Harness650703 UV Intensity Monitor for TrojanUVMax, 4” Diameter Chamber650704 UV Intensity Monitor for TrojanUVMax, 3.5” Diameter Chamber

uVmAX AccessoriesSolenoid Valves

650717-001 3/4" 2-way brass valve650717-002 1" 2-way brass valve

Soldenoid Kits650499 3/4" NPT650500 1" NPT

in-Line Flow restrictors

602711 2 gpm - 3/4"602712 5 gpm - 3/4"650518 7 gpm - 1”602713 10 gpm - 1"602714 12 gpm - 1"650519 15 gpm - 1”602715 20 gpm - 1"

trojan® ultraviolet Systems uV puriFier pArtS

63

Co

nd

itio

nin

g e

qu

ipm

en

t


Service Deionization (SDI) is the most efficient process for removing dissolved salts and minerals; mixed bed deionizers provide higher quality, more neutral pH, and better removal of silica and CO2 than separate bed systems. Our portable mixed bed units produce the quality of water required for any application, up to 18.2 megohm-cm resistivity at 25°C.

Service Carbon is an economical and efficient process for removing chlorine, chloramines and dissolved organic contaminants from incoming water supplies. Our portable exchange units contain virgin carbon to assure maximum water quality and service life of the bed. No reactivated carbon is ever used in the carbon tanks. Quality control of the entire process ensures optimal performance of our SDI and Service Carbon tanks, including media selection, product inspection, documented process controls, and tank traceability. Only resins and carbon media of the highest quality is used so that water quality will not be compromised.

Benefits of our Sdi System• Minimalcapitalinvestment.• Nooperationalresponsibility,MarCorautomaticallyservicestheequipment.• Waterquality&quantityisguaranteed.• Flexibleaccountconfigurationstorespondtoyourimmediateneeds.• Highpuritywaterfortemporarysituations.• Stringentqualityandtraceabilityproceduresinsureperformance.

quality of our Sdi System• Eachregeneratedservicetankistestedforpressureintegrityandproductwaterqualitybeforeitisinstalledinyourplant.• Theserialnumberofeachservicetankisrecordedontheproductioncontrollog,sototaltraceabilityisensured.• DocumentControl:Wehaveacomprehensivedocumentcontrolsystem.Noprocesschangesaremadewithoutpropernotificationandapproval.• QualityControl:Incomingrawmaterialsmustmeetqualityspecifications.Duringtheprocess,eachcomponenthasitsownoperatingcriteria,and

the entire process is monitored. Lastly, final product materials are double checked for quality with results recorded in the batch record.• Eachtankischemicallysanitizedbeforerefilling.

typical ApplicationsGeneral IndustryHemodialysisLaboratoryMicroelectronicsRinsingPharmaceutical / Biotech

Service deionization and Carbon exchange SerViCe deionizAtion & CArBon

tank SpecificationsConstruction: FiberglassHead: PolyethyleneInternals: Polyethylene/PVCFittings: Quick DisconnectSDI Media: Mixed Bed ResinsCarbon Media: Acid Washed Carbon 12x40 mesh, Iodine #900

*Except for the Super36 unit.

ACTIVATED CARBON remove both chlorine and dissolved organic contaminants. In dialysis applications, Mar Cor uses a special virgin activated carbon, which reduces Chloramines to acceptable levels for dialysis applications. Mar Cor acid washed virgin carbons with a 12x40 mesh size and an iodine number of at least 1000 units ensure maximum water quality and an extended service life of the carbon bed.

CATION DEIONIZERS have a high capacity to remove positively charged dissolved ionic contaminants such as calcium, sodium, magnesium, potassium, iron, and manganese (when used in conjunction with an anion deionizer they can produce a water quality in excess of 400,000 ohm/cm. (.9 ppm TDS as CaCO3).

ANION BED DEIONIZERS have a high capacity to remove negatively charged dissolved ionic contaminants such as carbonate, bicarbonates, sulfates, chlorides, nitrates and silica (when used in conjunction with a cation deionizer they can produce a water quality in excess of 400,000 ohm/cm. (.9ppm TDS as CaCO3 )

MIXED BED DEIONIZERS enhanced removal of silica and CO2 , as well as provide higher quality, and a more neutral pH than separate bed systems. Mar Cor’s units can be used to produce the quality of water required for any application, up to 18 megaohm-cm resistivity at 25°C. In-line quality monitors can be provided to immediately alert users when resin tanks need to be changed.

produCtS

operating parametersSDIMax.OperatingPressure&Temperature0.25 – 3.6 ft3: 90 psi / 38°C30 ft3: 100 psi / 38°CCarbonMax.OperatingPressure&Temperature0.25 – 3.6 ft3: 90 psi / 38°CTurbidity: 5 NTUColour: 5 unitsOrganics: 3 ppmManganese and Iron: 0.3 ppmFree Chlorine (for SDI tanks): 0.2 ppm

SerViCe deionizAtion & CArBon

S E R V I C E C A R B O N

pArt numBer

mAX. FLoW rAte gpm

(Lpm)

reSin VoLume

(Ft3)

dimenSionSW X H (inCH)

WeigHt (Wet)

LBS. (Kg)

350CRF 0.75 (2.8) 0.2 6 x 20 18 (8.2)350CR 2.0 (7.6) 0.2 6 x 23 23 (10.4)

360CRF 0.75 (2.8) 0.4 6 x 37 31 (14.1)360CR 3.0 (11.4) 0.4 6 x 39 36 (16.3)300CR 5.0 (18.9) 1.0 8 x 48 71 (32.2)420CR 10.0 (37.9) 2.0 12 x 46 123 (55.8)520CR 15.0 (56.8) 3.0 14 X 50 202 (91.6)

MIXED BED SDI

pArt numBer

mAX. FLoW rAte gpm

(Lpm)

reSin VoLume

(Ft3)

CApACitY (grAinS)

dimenSionSW X H (inCH)

WeigHt (Wet)

LBS. (Kg)

350PGF 0.75 (2.8) 0.25 2,500 6 x 20 23 (10.4)350PG 2.0 (7.6) 0.25 2,500 6 x 23 23 (10.4)

360PGF 0.75 (2.8) 0.54 5,400 6 x 37 47 (21.3)360PG 3.0 (11.4) 0.54 5,400 6 x 39 47 (21.3)300PG 5.0 (18.9) 1.20 12,000 8 x 48 95 (43.1)420PG 10.0 (37.9) 2.50 25,000 12 x 46 190 (85.5)520PG 15.0 (56.8) 3.60 36,000 14 X 50 274 (124.3)

64

Co

nd

itio

nin

g e

qu

ipm

en

t


Note: All weights and dimensions are approximate. Higher flow rates can be obtained with parallel configurations.

TANKS&ACCESSORIES

pArt numBer deSCription

Cation exchange Cylinders360C Cation, 6" x 35", 0.54 ft.³, 2 GPM, 3/4" QD300C Cation, 8" x 44", 1.25 ft.³, 5 GMP, 3/4" QD420C Cation, 12" x 42", 2.5 ft.³, 10 GPM, 3/4" QD520C Cation, 14" x 50", 3.6 ft.³, 15 GPM, 1" FPT

Anion exchange Cylinders360B Anion, 6" x 35", 0.54 ft.³, 3/4" QD300B Anion, 8" x 44", 1.2 ft.³, 5 GMP, 3/4" QD420B Anion, 12” x 42”, 2.5 ft.³, 10 GPM, 3/4” QD

520B Anion, 14" x 50", 3.6 ft.³, 15 GPM, 1" FPTWeak Base Anion exchange Cylinders

360WB Weak Anion, 6" x 35", 0.54 ft.³, 2 GPM 3/4" QD300WB Weak Anion, 8" x 44", 1.2 ft.³, 5 GMP, 3/4" QD420WB Weak Anion, 12" x 42", 2.5 ft.³, 10 GPM, 3/4" QD520WB Weak Anion, 14" x 50", 3.6 ft.³, 15 GPM, 1 FPT

Conventional mixed Bed deionizers - type ii350A Mixed Bed, 6" x 18", 0.25 ft.³, 2 GMP, 3/4" QD

350AF Mixed Bed, 6" x 18", 0.25 ft.³, 3/4 GMP, 3/8" QD360A Mixed Bed, 6" x 35", 0.54 ft.³, 3 GPM, 3/4" QD

360AF Mixed Bed, 6" x 35", 0.54 ft.³, 3/4" GPM, 3/8" QD300A Mixed Bed, 8" x 44", 1.2 ft.³, 5 GPM, 3/4" QD420A Mixed Bed, 12" x 42", 2.5 ft.³, 10 GPM, 3/4" QD520A Mixed Bed , 14" x 50", 3.6 ft.³, 15 GPM, 1" FPT

SUPER36 Mixed Bed, Jumbo Tank, 30 ft.³Service deionization Accessories - replacement qd Fittings/Screens

294PM06 Fitting/Connect/0.375Inx0.375in M/Howe298PT0406 Fitting/Connect/0.375Inx0.25in F/Imprl

ZWDJO2239 Fitting/Mad//0.75In/QdxmdZWDJO2240 Fitting/Fad//0.75In/QdxfdZWDJ02251 Gasket/0R/Ep/0.75In/Com

Q2015 Servicedip/Quick Disconnect/Nor/1.0InQ2016 Servicedip/Quick Disconnect/Nor/1.0InQ2017 Servicedip/Quick Disconnect/Nor/1.0InQ2019 Servicedip/Quick Disconnect/Nor/1.0In

Service deionization Accessories - quality LightsR7016B Service Dip/Quality Light/.50In/20KR7016C Service Dip/Quality Light/.50In/50KR7016E Service Dip/Quality Light/.50In/200KR7016F Service Dip/Quality Light/500 KR7016G Service Dip/Quality Light/.50In/1 Meg

TANKS&ACCESSORIEScont inued

pArt numBer deSCription

Service deionization Accessories - Hylite resistivity LightsR7100 Electrical Component/Transformer/110Vac

R7100P Electrical Component/Patch CordR7100RMR Electrical Component/Relay/110Vac

R7100RPC100 Electrical Component/Patch Cord/100 ft.R7100RPC50 Electrical Component/Patch Cord/50 ft.R71011MEG Service Dip/Quality Light/.50In/1 MegR7101200K Service Dip/Quality Light/.50In/200KR71012MEG Service Dip/Quality Light/.50In/Meg

R7101R Sensor/Re/Abs,Pp,Vt/25K-2Meg/PmR7101S200K Service Dip/Quality Light/.50In/200KR7101S25K Service Dip/Quality Light/.50In/25KService deionization Accessories - Hose Assemblies

HA 2202 Fittin/Rinse Valve/Interconnect/BiolabHA 2210 Inlet Assembly, 3/4" Ght X Qd X 6'HA 2211 Gauge Sampling Kit, 1/2, 0-100, StainlessHA 2212 Hose, Interconnection, Qd X Qd X 24" X 3/4"HA 2214 Hose, Interconnection, Qd X 3/4" Mtp X 24"HA 2215 Hose, Interconnection, Qd X 3/4" Mpt X 52"HA 2220 Hose, Interconnection, Qd X Qd X 3/4" X 24" With Light HA 2222 Fitting/ Multiport/Qdx0.75inx24in/BioHA 2223 Fitting/Light Body/Outlet/48In/BiolabHA 2224 Fitting/Outlet/Light Body X Qc X MghHA 2311 Assem/Inlet/1 In Qd X Npt 3Ft Long/BioHA 2313 Fitting/Multiport/1In X 24In/Nlb/BioHA 2314 Hose, Interconnect, 1" Mpt X 1" Mpt X 30"HA 2315 Light Body/Outlet/1 In/No Light/BioHA 2316 Fitting/Light Body/Interconnect/ 1.0 InHA 2317 Outlet,1X 3', No Light BodyHA 2318 Hose, Interconnection, 3/4" Mpt X Qd With LightHA 2319 Fitting/Outlet/1.0In/Light Body/Bio

Service deionization and Carbon exchange

water purificationeQuipMent

water purificationeQuipMent

65

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t

8400B SERIES RO MACHINEpARt

numbeRpeRmeAte

(Gpm)COnCentRAte

(Gpm)mOtOR

(Hp)eLements

(ARRAY)inLet (in.)

peRmeAte (in.)

COnCentRAte(in.)

pRe-FiLteRs # X HeiGHt

2H8B28B-3RO 22.0 7.0 15 4 - (1x1) 2 1 1/2 1 1/2 3 x 303H8B28B-3RO 33.0 11.0 20 6 - (2x1) 2 1 1/2 1 1/2 4 x 304H8B28B-3RO 44.0 15.0 25 8 - (2x2) 2 2 2 4 x 303L8B28B-3RO 50.0 17.0 20 9 - (2x1) 3 2 2 7 x 304L8B28B-3RO 65.0 22.0 25 12 - (2x2) 3 2 2 7 x 305L8B28B-3RO 80.0 27.0 30 15 - (3x2) 4 3 3 12 x 306L8B28B-3RO 100.0 33.0 30 18 - (3x3) 4 3 3 22 x 305V8B28C-3RO 110.0 37.0 40 20 - (4x5) 4 3 3 22 x 305X8B28C-3RO 125.0 42.0 50 25 - (5x5) 4 3 3 22 x 305Y8B28C-3RO 150.0 50.0 60 30 - (6x5) 4 3 3 22 x 30

10V8B28C-3RO 200.0 66.0 75 40 - (4x10) 6 4 4 36 x 3010X8B28C-3RO 250.0 83.0 100 50 - (5x10) 6 4 4 36 x 3010Y8B28C-3RO 300.0 100.0 125 60 - (6x10) 6 4 4 52 x 30

66

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t

800-268-5035 / 800-268-0032 (quebec) / www.mcpur.com / mAR COR puRiFiCAtiOn

Typical ApplicationsBoiler feed waterHumidification systemsAutomotive paint processesProcess ingredient waterRinse waterPower / Co-GenerationIon exchange pre-treatment

Standard Features1.0 - micron pre-filterPneumatic inlet shut-off valveMulti-stage centrifugal pump,TEFC Motor 460/3/60HzThree variable flow metersProgrammable auto-flush featureDigital system controlAdjustable reject recirculation

Operating ParametersOperating Pressure: 250 psig (1724 KPA)Maximum Recovery: 75%Nominal Rejection: 95-98%Operating Temperature: 35-95°F (2-35°C)Minimum Inlet Pressure: 30 psig (210 KPA)Design Temperature: 77°F (25°C)

Materials of ConstructionFrame: Epoxy coated steelMembrane Elements: TF PolyamideMembrane Housing: FRPLow Pressure Pipe: Sch. 80, PVCHigh Pressure Pipe: Stainless SteelControl Enclosure: NEMA 4/12Pump: Stainless Steel

32,000 tO 432,000 GALLOns peR DAYThe Biolab 8400B Series Reverse Osmosis Systems are designed to produce up to 300 USgpm (68 m3/h) of pure water. The 8400B Series provides high quality product water, user-friendly controls, durable construction, and easy installation. Our quality management system is registered to ISO 9001:2000.

Reverse Osmosis machinesbiOLAb - 8400b seRies

Specifications at 25°C (77°F).Other voltages are available upon request.Feed water requirements and other specifications are available upon request.

8400C SERIES RO MACHINEpARt

numbeRpeRmeAte

(Gpm)COnCentRAte

(Gpm)mOtOR

(Hp)eLements

(ARRAY)inLet (in.)

peRmeAte (in.)

COnCentRAte(in.)

pRe-FiLteRs # X HeiGHt

2H8C28B-3RO 22.0 7.0 15 4 - (1x1) 2 1 1/2 1 1/2 3 x 303H8C28B-3RO 33.0 11.0 20 6 - (2x1) 2 1 1/2 1 1/2 4 x 304H8C28B-3RO 44.0 15.0 25 8 - (2x2) 2 2 2 4 x 303L8C28B-3RO 50.0 17.0 20 9 - (2x1) 3 2 2 7 x 304L8C28B-3RO 65.0 22.0 25 12 - (2x2) 3 2 2 7 x 305L8C28B-3RO 80.0 27.0 30 15 - (3x2) 4 3 3 12 x 306L8C28B-3RO 100.0 33.0 30 18 - (3x3) 4 3 3 22 x 305V8C28C-3RO 110.0 37.0 40 20 - (4x5) 4 3 3 22 x 305X8C28C-3RO 125.0 42.0 50 25 - (5x5) 4 3 3 22 x 305Y8C28C-3RO 150.0 50.0 60 30 - (6x5) 4 3 3 22 x 30

10V8C28C-3RO 200.0 66.0 75 40 - (4x10) 6 4 4 36 x 3010X8C28C-3RO 250.0 83.0 100 50 - (5x10) 6 4 4 36 x 3010Y8C28C-3RO 300.0 100.0 125 60 - (6x10) 6 4 4 52 x 30

67

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t

mAR COR puRiFiCAtiOn / www.mcpur.com / 800-268-5035 / 800-268-0032 (quebec)

Typical ApplicationsBoiler feed waterHumidification systemsAutomotive paint processesProcess ingredient waterRinse waterPower / Co-GenerationIon exchange pre-treatment

Standard Features1.0 - micron pre-filtersPneumatic inlet shut-off valveMulti-stage centrifugal pump, TEFC Mo-tor 460/3/60HzThree digital flow metersPump recycleProgrammable auto-flush featurePLC system controlAdjustable reject recirculationClean-in-Place valving

Operating ParametersOperating Pressure: 250 psig (1724 KPA)Maximum Recovery: 75%Nominal Rejection: 95-98%Operating Temperature: 35-95°F (2-35°C)Minimum Inlet Pressure: 30 psig (210 KPA)Design Temperature: 77°F (25°C)

Materials of ConstructionFrame: Epoxy coated steelMembrane Elements: TF PolyamideMembrane Housing: FRPLow Pressure Pipe: Stainless SteelHigh Pressure Pipe: Stainless SteelControl Enclosure: NEMA 4/12Pump: Stainless Steel

32,000 tO 432,000 GALLOns peR DAYThe Biolab 8400C Series Reverse Osmosis Systems are designed to produce up to 300 USgpm (68 m3/h) of pure water. The 8400C Series provides high quality product water, user-friendly controls, durable construction, and easy installation. Our quality management system is registered to ISO 9001:2000.

Reverse Osmosis machinesbiOLAb - 8400C seRies


4400M RO STANDARD 208V, 60HZ, 3-PHASEpARt

numbeR mODeL CApACitY(GpD)

pRODuCtiOn(Gpm/Lpm)

mOtOR(Hp) ReCOveRY COntROL

inteRFACeWeiGHt

(Lbs.)

22M16B-2E 4400M-4K 4,000 2.8 / 10.6 2.0 75% E (DF) 43822M16B-2F 4400M-4K 4,000 2.8 / 10.6 2.0 75% F (ST-0DP) 43842M16B-2E 4400M-8K 8,000 5.6 / 21.2 3.0 75% E (DF) 50642M16B-2F 4400M-8K 8,000 5.6 / 21.2 3.0 75% F (ST-0DP) 50662M16B-2E 4400M-12K 12,000 8.3 / 31.4 5.0 75% E (DF) 62762M16B-2F 4400M-12K 12,000 8.3 / 31.4 5.0 75% F (ST-0DP) 62782M16B-2E 4400M-16K 16,000 11.0 / 41.6 5.0 75% E (DF) 72182M16B-2F 4400M-16K 16,000 11.0 / 41.6 5.0 75% F (ST-0DP) 721

102M16B-2E 4400M-20K 20,000 14.0 / 53.0 7.5 75% E (DF) 783102M16B-2F 4400M-20K 20,000 14.0 / 53.0 7.5 75% F (ST-0DP) 783122M16B-2E 4400M-24K 24,000 17.0 / 64.3 7.5 75% E (DF) 832122M16B-2F 4400M-24K 24,000 17.0 / 64.3 7.5 75% F (ST-0DP) 832

68

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


4,000 tO 24,000 GALLOns peR DAYThe Biolab 4400M Series Medical RO Systems are designed to produce up to 17 USgpm (3.86 m3/h) of pure water. The 4400M Series provides high quality product water, user-friendly controls, durable construction, and easy installation. This Series of RO machines are licensed with Health Canada and the USFDA 510(k) as medical devices. Our quality management system is registered to ISO 13485:2003.

typical medical ApplicationsHemodialysisClean sterilize reuse (CSR)Sterile Processing Department (SPD)Central LaboratoryHumidification Systems

standard Features1.0 - micron pre-filter Automatic inlet shut-off valveMulti-stage 316SS centrifugal pump, TEFC Motor 208/3/60HzThree variable flow metersPump RecycleProgrammable auto-flush featureDigital system control Adjustable low quality set point Adjustable reject recirculationClean-In-Place valvingAutomatic permeate divert system add-onUp to 75% recovery

Operating parametersOperating Pressure: 250 psig (1724 KPA)Maximum Recovery: 75%Nominal Rejection: 95-99%Operating Temperature: 35-95°F (2-35°C)Minimum Inlet Pressure: 30 psig (210 KPA)Design Temperature: 77°F (25°C)

materials of ConstructionFrame: Epoxy coated steelMembrane Elements: TF PolyamideMembrane Housing: Stainless SteelLow Pressure Pipe: Sch. 80, PVCHigh Pressure Pipe: Stainless SteelControl Enclosure: NEMA 4/12Pump: Stainless Steel

Reverse Osmosis machines 4400m seRies

Specifications at 77°F (25°C).All weights are approximate.Other models are available upon request.Feed water requirements and other specifications are available upon request.

69

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


4400C RO STANDARD 208V, 60HZ, 3-PHASEpARt

numbeR mODeL peRmeAteGpD (Lpm)

COnCentRAteGpm (Lpm)

mOtOR(Hp)

eLement numbeR

inLet in. (mm)

peRmeAtein. (mm)

COnCentRAtein. (mm

WeiGHt Lbs. (KG)

4400C-2K 12C16B-2RO 1.3 (1.9) 0.7 (2.6) 1.5 1 3/4 (1.91) 1/2 (1.27) 1/2 (1.27) 394 (178)4400C-4K* 22C16B-2RO 2.8 (10.6) 2.8 (10.6) 2.0 2 3/4 (1.91) 1/2 (1.27) 1/2 (1.27) 438 (199)4400C-6K 32C16B-2RO 4.2 (15.9) 4.2 (15.9) 3.0 3 3/4 (1.91) 1/2 (1.27) 1/2 (1.27) 481 (218)4400C-8K* 42C16B-2RO 5.6 (21.2) 5.6 (21.2) 3.0 4 3/4 (1.91) 3/4 (1.91) 3/4 (1.91) 506 (230)4400C-10K 52C16B-2RO 6.9 (26.1) 6.9 (26.1) 5.0 5 3/4 (1.91) 3/4 (1.91) 3/4 (1.91) 593 (269)4400C-12K* 62C16B-2RO 8.3 (31.4) 8.3 (31.4) 5.0 6 1 1/2 (3.81) 3/4 (1.91) 3/4 (1.91) 627 (284)4400C-14K 72C16B-2RO 9.5 (36) 9.5 (36) 5.0 7 1 1/2 (3.81) 3/4 (1.91) 3/4 (1.91) 661 (300)4400C-16K* 82C16B-2RO 11 (41.6) 11 (41.6) 5.0 8 1 1/2 (3.81) 1 (2.54) 1 (2.54) 721 (327)4400C-18K 92C16B-2RO 12.5 (47.3) 12.5 (47.3) 7.5 9 1 1/2 (3.81) 1 (2.54) 1 (2.54) 764 (347)4400C-20K* 102C16B-2RO 14 (53) 14 (53) 7.5 10 1 1/2 (3.81) 1 (2.54) 1 (2.54) 783 (355)4400C-24K* 122C16B-2RO 17 (64.4) 17 (64.4) 7.5 12 1 1/2 (3.81) 1 (2.54) 1 (2.54) 832 (377)

4,000 tO 24,000 GALLOns peR DAYBiolab 4400C Series Reverse Osmosis Systems are designed to produce up to 17 USgpm (3.86 m3/h) of pure water. The 4400C Series provides high quality product water, user-friendly controls, durable construction, and easy installation. All systems are built to exacting standards under ISO 9001:2000.

typical medical ApplicationsCommercial ApplicationsClean Sterilize Reuse (CSR)Central LaboratoryBoiler feed waterHumidification systemsProcess ingredient waterRinse waterIon exchange pre-treatment

standard Features1.0 - micron graded density pre-filterAutomatic inlet shut-off valveMulti-stage 316SS centrifugal pump, TEFCThree variable flow metersStainless steel pressure gaugesProgrammable auto-flush featureDigital system controlAdjustable reject recirculationClean-In-Place valvingAutomatic permeate divert system add-onUp to 75% recovery

Operating parametersOperating Pressure: 250 psig (1724 KPA)Maximum Recovery: 75%Nominal Rejection: 95-99%Operating Temperature: 2-35º C (35-95º F)Minimum Inlet Pressure: 30 psig (210 KPA)Design Temperature: 25º C (77º F)

materials of ConstructionFrame: Powder coated steelMembrane Elements: TF PolyamideMembrane Housing: Stainless SteelLow Pressure Pipe: Sch. 80 PVCHigh Pressure Pipe: Stainless SteelControl Enclosure: NEMA 4/12Pump: Stainless Steel

Reverse Osmosis machines 4400C seRies

Specifications at 77°F (25°C).All weights are approximate.Other voltages are available upon request.Feed water requirements and other specifications are available upon requests.*Even element systems are fast track items and can be available for shipment within two weeks.

70

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


4400 RO MACHINE SPARE PAR TS

pARtnumbeR

miCROnRAtinG

ControlsD08414T Digital Controller, ROD09034T Display, ROCTS11D Conductivity sensor

800T-N319W Indicator LED bulb

pumps/motorsRefer to Grundfos Section Pages


pARtnumbeR

miCROnRAtinG

PrefilterFM00120X 2.5” x 20” 1-micron filter (20 per case)

155360 4.5” x 20” 1-micron filterQ4241E O-ring, housing, 3/4”151122 O-ring, housing, BB

SPANNER2 Filter housing wrench, 3/4”SPANNER3 Filter housing wrench, BB

valves457163X 1” Solenoid Valve, brass, 24/60 (inlet)457-169D 1-1/2” Solenoid Valve, brass (inlet)

SS114 1/4” Ball Valve, SS (sample)H310SSNR12 1/2” Needle Valve, SS (concentrate, recycle)

E292V 1/4” Pressure Relief Valve456939Y 1/2” Solenoid Valve, brass, 24/50

Flows & pressures7266007 0-400 PSI Gauge, SS4241291 0-100 PSI Gauge, brass

JB58A214C 1/4” Pressure Switch, brassFSA00600 Flow Meter, 0.2 - 2.6 gpm, 1”FSA01500 Flow Meter, 0.6 - 6.6 gpm, 1 1/4”FSA02500 Flow Meter, 1.1 - 11.0 gpm, 1 1/4”FSA03000 Flow Meter, 1.3 - 13.2 gpm, 1 1/2”

membrane & Housing4040ACM2TSA Membrane, 4x40, with adapter (2004-2009)

1230048 Membrane, 4x40, with adapter (2009-)1231888 4x40 Housing with end caps**1158620 End Cap, 4.0**

116EPDM O-ring, internal, end cap**342EPDM O-ring, external, end cap**

VSH-4043SS 4x40 Housing, VSH style, SS, with end caps VSH-40CAP End Cap, black, VSH style

VSH-40CLMPKIT Clamp Kit, VSH styleVSH-40GSKT Gasket, U-packing, VSH style

VSH-40-ORING O-ring, small, VSH styleHDPEPEA3 Hollow Adapter

HDPEPEA53 Solid Adapter113EPDM Adapter with O-rings

ConnectorsA8TMC8 1/2” TU Stem x 1/2” MNPT AdaptA8TU8 1/2” TU TeeA8EU8 1/2” TU Union Elbow

SC-8 1/2” Locking Clip, BlackEB-86-100 1/2” Black Tubing, PE

P8FC8 1/2” TU x 1/2” FNPT Elbow, F&TP8ME8 1/2” TU x 1/2” MNPT Elbow, F&TP4ME4 1/4” T x 1/4” M Elbow, F&TP4FE4 1/4” T x 1/4” F Elbow, F&T

EB-43-0100 1/4” Black Tubing, PE

Reverse Osmosis machines 4400 seRies

Notes:** RO machines purchased prior to 9/28/04 will have OSMO brand membrane housings. For replacement parts, use the part numbers that are identified with

** under the MEMBRANE & HOUSING section. All newer machines will have the VSH style housings.*** As of July 2009 systems used true 4” x 40” housings with no adapters

71

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


RODI SERIES RO MACHINEpARt

numbeRpeRmeAte

(Gpm)mOtOR

(Hp)RO

eLementsinLet (in.)

peRmeAte (in.)

WeiGHt(Lbs.)

2E719B-2RODI 1.5 3.0 2 3/4 1/2 8383E719B-2RODI 3.5 3.0 3 3/4 3/4 8814E719B-2RODI 5 5.0 4 3/4 3/4 9066E719B-2RODI 7.5 5.0 6 1 1/2 1 1,0278E719B-2RODI 10 7.5 8 1 1/2 1 1,121

10E719B-2RODI 12.5 7.5 10 1 1/2 1 1,18312E719B-2RODI 15 7.5 12 1 1/2 1 1,232

Typical ApplicationsPharmaceutical preparationsBiological engineeringCentral laboratory waterPower industryHumidificationRinsing of electronic componentsGlassware rinsingPreparation of process chemicals

Standard FeaturesSkid mountedInternal power supplyOperational instrumentsEpoxy coated steel framePressure gaugesFlow metersPre-wired / Pre-plumbedFactory tested

2,160 tO 21,600 GALLOns peR DAYThe Biolab RODI Reverse Osmosis / Electrodeionization isa unique water purification system that combines bothreverse osmosis and electro-deionization into oneintegrated unit. The RODI system will produce highpurity water low in TOC, microorganisms and particlesup to 18.2 Megohm.cm at flows up to 15 gpm. Biolab’sRODI systems have several different purificationmodules to choose from. Our quality managementsystem is registered to ISO 9001:2000.

The Biolab RODI system includes a 1.0 micronprefilter, multistage high pressure RO boosterpump, RO pressure vessels in a choice of materials,TFC RO membranes (4” membranes up to 15 gpm),EDI module(s), EDI power supply, high waterrecovery, choice of piping materials, monitoringinstrumentation, manual & automated valves. TheRODI system includes a main control panel (NEMA4/12), which includes a EPROM and OIT terminal tooperate both the RODI system and components thatwill interface with the system such as pre and posttreatment. The system is completely pre-wired andpre-piped on one skid for fast economical installation.

Reverse Osmosis machinesbiOLAb - RODi seRies

Specifications at 25°C (77°F).All weights are approximate.Various electrical options are available.Feed water requirements and other specifications are available upon request.

Options AvailableHot water sanitizableVarious piping materialsStainless steel frameBrine feederUltraviolet sterilizerSystem validationNIST traceable instrumentation

72

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t

800-268-5035 / 800-268-0032 (quebec) / www.mcpur.com / mAR COR puRiFiCAtiOn72

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t

4400HX SERIES ROpARt

numbeR mODeL RO CApACitY(GpD)

RO tYpe

sYstemDesiGn

s1 Configuration24M36B-2RO-S1 4400HX-4K-S1 4,000 Hot Indirect44M36B-2RO-S1 4400HX-8K-S1 8,000 Hot Indirect64M36B-2RO-S1 4400HX-12K-S1 12,000 Hot Indirect84M36B-2RO-S1 4400HX-16K-S1 16,000 Hot Indirect

s2 Configuration24M36B-2RO-S2 4400HX-4K-S2 4,000 Hot Direct44M36B-2RO-S2 4400HX-8K-S2 8,000 Hot Direct64M36B-2RO-S2 4400HX-12K-S2 12,000 Hot Direct84M36B-2RO-S2 4400HX-16K-S2 16,000 Hot Direct

s3 Configuration22M36B-2RO-S3 4400HX-4K-S3 4,000 Cold Indirect42M36B-2RO-S3 4400HX-8K-S3 8,000 Cold Indirect62M36B-2RO-S3 4400HX-12K-S3 12,000 Cold Indirect82M36B-2RO-S3 4400HX-16K-S3 16,000 Cold Indirect

s4 Configuration22M36B-2RO-S4 4400HX-4K-S4 4,000 Cold Direct42M36B-2RO-S4 4400HX-8K-S4 8,000 Cold Direct62M36B-2RO-S4 4400HX-12K-S4 12,000 Cold Direct82M36B-2RO-S4 4400HX-16K-S4 16,000 Cold Direct

Reverse Osmosis machines

3,600 tO 16,000 GALLOns peR DAYWith the need for better bacteria control in dialysis systems, Mar Cor Purification has taken the hot water disinfection technology that is accepted in the pharmaceutical industry and applied it to the 4400HX system design including the RO with a 510(k) device registration. The fully integrated design of the RO and distribution system is the first in the industry. The ability to hot water disinfect will reduce bacteria related problems and allow for regular automated disinfection so that the system has a higher uptime factor.

4400HX seRies

standard Features• 316SS Insulated Distribution Tank• Electric Heat Exchanger• Allen Bradley Micrologics PLC• Stainless Steel VFD Distribution Pump(s)• Optional Ultraviolet Sterilizer• Digital Conductivity and Temperature• NEMA 4/12 Control Enclosures• All Stainless Steel Piping and Housings• 75% Water Recovery

Operating parametersOperating Pressure: 250 psig (1724 KPA)Maximum Recovery: 75%Nominal Rejection: 95-99%Operating Temperature: 35-95°F (2-35°C)Minimum Inlet Pressure: 30 psig (210 KPA)Design Temperature: 77°F (25°C)

ConfigurationsCode: S1 - Storage Tank Design Hot Water Disinfect RO and LoopCode: S2 - Direct Feed Design Hot Water Disinfect RO and LoopCode: S3 - Storage Tank Design Cold Water RO and Hot Disinfect LoopCode: S4 - Direct Feed Design Cold Water RO and Hot Disinfect Loop

Specifications at 77°F (25°C).All weights are approximate.Tank are available in 100 gal and 170 gal sizes.Feed water requirements and other specifications are available upon request.

73

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


M I L L E N I U M SERIES RO MACHINEpARt

numbeRpOWeR

RequiReDpeRmeAte

(GpH)DimensiOnsW x D xH (in.)

peRmeAte (GpH)

WeiGHt(Lbs.)

1232429 M-750 115 V, 60Hz, 8/5 amps 8 x 15 x 25.5 31.2 551235137 M-750 230 V, 50Hz, 8/5 amps 8 x 15 x 25.5 31.2 55

73

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


1,970 mL/minThe Millenium is specially designed for hemodialysis application in acute and home settings. Advanced performance monitoring includes percent rejection and a digital display of product water total dissolved solids (TDS) as mg/L. For added safety, an audible alarm with adjustable set points is incorporated into the TDS monitor. The #1 monitoring and instrumentation meets the standards recommended by the Association for the Advancement of Medical Instrumentation (AAMI). A pretreatment cart and a variety of docking stations make the RO system portable. The Millenium Machine is licensed with Health Canada and USFDA 510(k) as a medical device.

miLLenium™ seRies

standard Features and benefits• Panel mounted pressure gauges continuously display critical pump and

product water pressures.• Space-efficient design built for easy portability.• Chemically compatible with 1% Minncare® Cold Sterilant disinfectant

solution.• Stainless steel RO pump and SS pressure vessels are used for maximum

strength, reliability, and longevity.• Thin film membrane for high quality and long life.• Incoming water solenoid allows for system cleaning/sanitizing without

disconnecting the water supply.• Incoming water low pressure switch provides pump protection during

sudden incoming pressure loss.• Low Feed Pressure LED illuminates, indicating low feed pressure during

normal operation.• Product water recirculation returns the excess product water into the feed

stream, which reduces stress on the RO membranes, increases permeate quality, conserves water, inhibits bacterial growth, and lowers operating costs.

• In-line GFCI (Ground Fault Circuit Interrupter) in a detachable power cord.• Colour-coordinated quick disconnect fittings for easy visual line

connections.• FDA registered manufacturer meets stringent medical device

requirements.• Listed as certified by CSA to Canadian and U.S. medical electrical standards

and demonstrates compliance with CAN/CSA C22.2 No. 601.1-M90 (Safety of Medical Electrical Equipment, Part I; General Requirements for Safety) and UL STD 2601-1 (Safety of Medical Electrical Equipment, Part I; General Requirements for Safety).

Operating parametersOperating Pressure: 200 psig (1379 KPA)Maximum Recovery: 38%Nominal Rejection: 95-98%Operating Temperature: 35-90°F (2-32°C)Minimum Inlet Pressure: 30 psig (210 KPA)Design Temperature: 77°F (25°C)Electrical: 115/230 V, 60/50Hz 8/5 amps

Optional FeturesDocking StationsPretreatment CartsWater SoftenersHardness & Total Chlorine Test KitsCarbon TanksAAMI Water AnalysisSediment FiltersHigh & Low pH CleanersDisinfectant Tanks

Specifications at 77°F (25°C).All weights are approximate.Feed water requirements and other specifications are available upon request.

74

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


MILLENIUM SERIES RO SPARE PARTS

pARt pRODuCt numbeR DesCRiptiOn electrical ME35329 Fan and Motor, cooling, 110VAC, 60Hz ME35328 Fan and Motor, cooling, 220VAC, 50Hz ME20290 Fuse, 5 amp, SLO BLO (220V 50Hz) 1236062 Fuse, 1/4 amp, SLO BLO (120V 60Hz) 1234687 Fuse, 1/8 amp, 50Hz only 1234685 Fuse, 8 amp, SLO BLO (120V 60Hz) 1234347 Fuse Drawer, 50/60Hz 1234563 Low Feed Pressure LED ME35330 Power cord for cooling fan ME12310 PCB assy, % rejection 1263879 PCB assy, conductivity ME12312 PCB assy, display 1236173 Plug End (50Hz only, use with P/N ME30382) ME30382 Power cord, Hospital Grade (50Hz only) 1234349 Power cord retainer (60Hz only) 1236543 Power cord retainer (50Hz only) 1234676 Power supply (120V 60Hz) 1234675 Power supply (220V 50Hz) 1234350 Inlet power module 1232381 GFI Power cord (60Hz only) ME12131 Sensor probe 1229978 Relay, 24VAC Coil ME20203 Switch, inlet water valve, RO pump power 1229976 Switch Guard 1229974 Switch, Disinfect, Red, 60Hz 1234355 Switch, Disinfect, Red, 50Hz 1229950 Pressure Switch 1235157 Sonalert 1231491 Terminal butt splice, no crimp 1229977 Timer capsule 1235679 Cable Assembly, LV panel components Fittings ME40569 Elbow, 3/8” SF x 1/4” MNPT ME40570 Elbow, 1/4” SF x 1/4” MNPT ME40742 Elbow, 1/4” SF x 1/4” stem ME41566 Elbow, 1/4” SF x 3/8” stem ME40976 Straight, 1/4” SF x 1/4” MNPT ME40672 Barb Adapter, 3/8” tube end x 3/8” hose ME40605 GHT, feed water line fitting ME40604 GHT, product water line fitting ME40564 Elbow,3/8” SF x 3/8” tube end adap. ME40568 Elbow,3/8” SF x MNPT 1235519 Fitting, 2 way divider, 3/8” SF ME42046 Product Port, QD(Female),1/4” SF ME42051 QD(Male) for hoses, elbow, 3/8” Barb ME42085 QD, Disinfect Port, Yellow ME42080 QD, Feed Port, Green ME42081 QD, Waste Port, Red ME42084 QD, Male, Disinfect Hose, Yellow ME42082 QD, Male, Feed Hose, Green ME42096 QD, Male, Waste Hose, Red ME41083 Straight, 3/8” sf x 1/4” FNPT

MILLENIUM SERIES RO SPARE PARTS cont inued

pARt pRODuCt numbeR DesCRiptiOn Gauges ME40741 Gauge, 100 PSI, bottom mount ME42048 Gauge, product pressure ME42074 Gauge, pump pressure Hose / tubing ME41555 Hose clamp, SS, 5/8” ME60021 Tube, PE, 1/4”, green ME60031 Tube, PP, 1/4”, natural ME60032 Tube, PP, 3/8”, natural ME60370 Hose, 3/8” ID x 5/8” OD, braided ME60372 Hose, 3/8” ID, clear vinyl membranes OS1228070 Membrane, 2.4” x 21”, cage wrapped, TF motor / pump 3002168 Motor, 1/3HP, 110/230V, 50/60Hz 3007544 Pump, 100 GPH, SS w/regulator pre-Filters & Filter Housings ME40695 Filter, 1 micron, 9-7/8”, 40/case ME40696 Filter, 5 micron, 9-7/8”, 40/case ME40698 Filter, carbon, 9-7/8” ME14779 Pre-filter assembly kit, M-1 kit ME12128 Pre-filter housing assembly valves ME42047 Check valve 1228224 Check valve, product return ME40574 Valve, feed water solenoid, (120V 60Hz) ME40739 Valve, feed water solenoid, (220V 50Hz) ME42014 Valve, operate/flush, product miscellaneous 1236541 Manual ME40694 O-ring, pre-filter (9-7/8”) OS1151580 O-ring, EPDM 116 OS1151581 O-ring, ROMA endcap, large 1234489 Regulator, product pressure adjustment 1235113 Product pressure adjustment retrofit kit OS1203174 Shield, Drip, Procon Pump ME60746 Motor mount ME30335 Knob, TDS switch ME41611 Knob bushing, TDS switch OS1151419 Half clamp for ROMA OS1160368 Endcap, side port ME14924 Millenium prefilter install kit (mounts prefilter to RO or to wall – includes all necessary parts) ME10179 Kit, disinfect container with fittings

miLLenium™ seRies

75

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t

mAR COR puRiFiCAtiOn / www.mcpur.com / 800-268-5035 / 800-268-0032 (quebec) 75

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t

G E M I N I WAT E R S Y S T E MpARt pRODuCt

numbeR DesCRiptiOn

GEMINI-1102 110 VAC Unit w/ (2) High Purity Low TOC, & 0.2 μ Filter, Countertop

GEMINI-110U 110 VAC Unit w/ (3) High Purity Low TOC, 0.05 μm In-Line Filter, Countertop

GMB-100 110 VAC Unit w/ (2) High Purity Low TOC, 0.02 μm In-Line Filter, Wall Mount

GBM-100UF 110 VAC Unit w/ (3) High Purity Low TOC, 0.05 μm In-Line Filter, Wlal Mount

2200 P O R TA B L E RO MACHINE

Aries High purity system ARies Gemini uLtRA HiGH puRitY WAteR sYstemThe GEMINI Ultra High Purity Water System provides up to 3.7 liters per minute of 18.2 megohm, 0.2 micron filtered water. The Multi- Pass Ultraviolet system irradiates the water at three separate passes in the recirculation loop. The dispensing port is continuously exposed to UV for complete sterility at the outlet. Water quality meets or exceeds ASTM, CAP and NCCLS Type 1 specifications. Volumetric dispensing is controlled by the microprocessor and easily operated using the soft touch keypad. Water quality is continuously monitored on the digital display and LED’s alert the user to system status. Hibernation mode runs the pump intermittently to keep the system ultrapure.

The integral basin accommodates filling large containers and controls drips and spills. A variety of options are available such as a dispensing gun, ultra-filtration, wall mounting hardware and a sanitization kit. RO pretreatment systems are also available.

Features and benefits• 18.2 Megohms• Up to 3.7 liters per minute• Integral, full flow 0.2 micron filter• Multi-Pass UV standard• UV protected dispensing port• Microprocessor controlled• Built in drain basin• Easy cartridge replacement• Exceeds ASTM, CAP and NCCLS

Type I specifications.• Meets Bio-Medical Grade

Specification ASTM D5196

specifications Dimensions 21.5 in. x 18.25 in. x 18.25 in. (61 cm x 46 cm x 47 cm)Weight 50 lbs dry / 55 lbs operating (22.7 kg dry / 25 kg operating)Connections 3/8” O.D. Tubepower Requirements 120 VAC/ 60 Hz @ 1.0 amppressure (max./min.) 90 psig/20 psigtemperature (max.) 100°FFlow Rate 3.7 liters per minute (1.0 GPM)

G E M I N I WAT E R S Y S T E MpARt pRODuCt

numbeR DesCRiptiOn

HPA-001 Dispensing Gun and tubing kit

HPA-002 U.V. Combination for bacteria and TOC destruct

HPA-006 Wall Mounting Bracket

AFK-006 Cartridge Kit with (2) High Purity and 0.2 micron cartridges

AFK-008 Cartridge Kit with (3) High Purity Low TOC Cartridges and (1) 0.05 μ ultrafilter

AFK-009 Cartridge Kit with (3) High Purity Low TOC Cartridges

PF-00-6505 In-Line Hollow Fiber 0.05 micron UF for pyrogen removal

HPA-005 Sanitization Kit

HPL-RO Reverse Osmosis Pretreatment

76

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t 2200 P O R TA B L E RO MACHINEpARt

numbeRpeRmeAte

(Gpm)COnCentRAte

(GpH)mOtOR

Hp eLements inLet peRmeAte COnCentRAte WeiGHt (Lbs.)

26M15A-2RO 1.52 1.52 0.75 2 3/4” GHT 3/4” GHT 3/4” GHT 207


2,200 GALLOns peR DAYThe Biolab 2200 Portable RO Systems are designed to produce up to 1.52 USgpm of pure water. The 2200 provides high quality product water, user-friendly controls, durable construction, and easy installation. This series of RO machines is primarily designed for hemodialysis central acute programs. It is designed to sup-port one dialysis machine or as many as six dialysis machines. The machine is licensed with Health Canada and the USFDA 510(k) as medical devices. Our quality management system is registered to ISO 13485:2003.

typical medical Applications

2200 pORtAbLe RO

Hemodialysis central acute programsClean sterilize reuse (CSR)Sterile processing department (SPD)Central laboratory

Central Acute RO machine benefits• Digital water quality meter (LCD screen) displays product and incoming

water quality, percent rejection, and activates audible and visual alarms.• Standard permeate divert function on the RO.• Adjustable permeate water recirculation for “fine tuning”

output flows.• Panel-mount pressure gauges and flow meters on every machine.• Stainless steel RO pump for long-lasting, quiet operation, including

a soft start feature.• Swivel locking casters that provide easy movement.• Ability to configure a complete system in either in direct-feed or storage-tank

mode of operation.• Pretreatment lock-out and remote alarm interphase options.• Availability of installation kits for quick and easy connections.

Operating parametersOperating Pressure: 200 psigMaximum Recovery: 75%Nominal Rejection: 95-99%Operating Temperature: 40-90°F (4-32°C)Minimum Inlet Pressure: 20-60 psigDesign Temperature: 77°F (25°C)Electrical Requirements: 115V, 1 Phase, 60 Hz


77

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t



pARtnumbeR

miCROnRAtinG

membrane & HousingSK2521TF Membrane, 2.5x21, TFC, LPVSH2521 Housing, 4x21, VSH style with end capsVSH-CAP End Cap, black, VSH Style

VSH-CLMPKIT Clamp Kit, VSH styleVSH-GSKT Gasket, U-packing, VSH style

VSH--ORING O-ring, small, VSH style167061011 Clamp, 2.5/8”, Membrane HSG

electricalD08414T Digital Controller, ROD09804T Display, RO (green)CT5110 Conductivity Sensor

pump/motorTMSS201 Pump, SS Mag Drive

M1D12C05EWF Motor, 1/4 HP, TEFC, 115/1/60TMB3HD Coupling, L-Joy & Mag Coupler


pARtnumbeR

miCROnRAtinG

prefilter150067 10” Filter Housing, 3/4”I/O, Tapped

FM001975X Filter, 2.5” X 9-7/8” 1-Micron (40 per case)SPANNE2 Wrench, Filter Housing 3/4”

valves456444Y Solenoid Valve, 1/2”, Brass (inlet)6386M6F Ball Valve, 3/8”MPT x 3/8”FPT (CIP)SS-1RF4 Needle Valve, 1/4” SS (concentrate, recycle)5723190 Check Valve, 1/4”, PVC

Flows & pressures7265981 0-100 PSI Gauge, SS

50100602 0-400 PSI Gauge, SSJB58A214C Pressure Switch, 1/4”, Brass

F509E Flow Meter, 0.2-2.0 GPM, 1/4”FNPT

Flow block & ConnectorsPVBC-PORTV1 Inlet Block, PVC, 1/2”

PB-32 Product Block Header, PolyProP8ME12 Elbow, 1/2” TB x 3/4” MNPT, F&TP6ME8 Elbow, 3/8” TB x 1/2” MNPT, F&TA8EU8 Elbow Union 1/2” TB x 1/2” TBA4ME4 Elbow 1/4” TB x 1/4” MPTA6ME6 Elbow 3/8” TB x 3/8” MPTA6ME4 Elbow 3/8” TB x 1/4” MPTA4FE4 Elbow 1/4” TB x 1/4” FPTA6FE4 Elbow 3/8” TB x 1/4” FPTA6MC4 Connector 3/8” TB x 1/4” MPTA6TU6 Tee Union 3/8” TBA8TU8 Tee Union 1/2” TBA8UC6 Union 1/2” TB x 3/8” TB

A6TMC4 Tube Stem Adapt 3/8” TB X 1/4” MPTA8TMC8 Tube Stem Adapt 1/2” TB x 1/2” MPTA6CAP Tube Cap, 3/8”A4TEU6 Tube Elbow Union 1/4” TB x 3/8” STMA4RD6 Tube Reducer 1/4” TB x 3/8”STM

SC-4 Locking Clip, 1/4”, BlackSC-6 Locking Clip, 3/8”, BlackSC-8 Locking Clip, 1/2”, Black

EB-43-0100 Tubing, PE, 1/4”, BlackEB-64-0100 Tubing, PE, 3/8”, BlackEB-86-0100 Tubing, PE, 1/2”, Black

TA773 Male Adapter, 3/8” MPT x MGHT, DixonTA774 Male Adapter, 1/2” MPT x MGHT, Dixon

Reverse Osmosis machines 2200 pORtAbLe RO

78

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


3300 S E R I E S RO MACHINEpARt

numbeRpeRmeAte

(Gpm)COnCentRAte

(GpH)mOtOR

Hp eLements inLet (in.)

peRmeAte (in.)

COnCentRAte (in.)

WeiGHt (Lbs.)

26B15F-1RO 1.53 0.38 1 2 4-Mar 2-Jan 2-Jan 17436B15F-1RO 2.29 0.57 1 3 4-Mar 2-Jan 2-Jan 185


2,200 tO 3,300 GALLOns peR DAYThe Biolab 3300 Series Reverse Osmosis Systems are designed to produce up to 2.29 US gpm (0.52 m3/h) of pure water. The 3300 Series provides high quality product water, user-friendly controls, durable construction, and easy installation. Our quality management system is registered to ISO 9001:2000.

typical Applications

biOLAb - 3300 seRies

Commercial waterRinse waterResearch and laboratory useBoiler feed waterHumidification systemsProcess ingredient waterIon exchange pre-treatmentCar wash rinse water

standard Features1.0 - micron pre-filter Automatic inlet shut-off valveRotary vane pump, 1 phaseThree variable flow metersAuto-flush featureAnalog system control Adjustable reject recirculationPre-filter, post filter, primary and final pressure gaugesSingle source powerOptional conductivity meter

Operating parametersOperating Pressure: 225 psig (1551 KPA)Maximum Recovery: 75%Nominal Rejection: 95-98%Operating Temperature: 35-95°F (2-35°C)Minimum Inlet Pressure: 30 psig (210 KPA)Design Temperature: 77°F (25°C)Electrical: 115V, 60Hz

materials of ConstructionFrame: Epoxy coated steelMembrane Elements: TF PolyamideMembrane Housing: 304L Stainless SteelLow Pressure Pipe: Sch. 80, PVCHigh Pressure Pipe: PolypropyleneControl Enclosure: NEMA 4Pump: Brass


79

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


Typical ApplicationsUSP Purified WaterHighly Purified WaterBiotechnologyCosmetics Medical Device ManufacturingCentral Lab SystemsBeverageHospital Central SystemsOphthalmics

Standard FeaturesSingle Skid DesignEasy Access to EquipmentNEMA 4X PLC Based Control Panel

Operating ParametersFeed Pressure: 2.6-5.5 bar (40-80 psi)Design Recovery: 75%Max TDS: 600 ppmOperating Temperature: 10-27°C (50-80°f )Design Temperature: 25°C (77°F)

Materials of ConstructionFrame: Stainless SteelMembrane Elements: TF PolyamideMembrane Housing: FRPRO Low Pressure Pipe: Stainless SteelRO High Pressure Pipe: Stainless SteelPump: Stainless Steel

The Mar Cor Purification USPure system is a standard single skid design that includes pretreatment, Reverse Osmosis (RO) & Elec-trodeionization (EDI) on one integrated skid for fast installation & startup. The validatable system offers a pre-designed space saving layout that is cost effective and assures the reliable production of USP grades of water.

The complete system provides for sanitary piping & instrumenta-tion from the RO through to the EDI outlet. The entire system is controlled by a PLC based control system. Two designs are avail-able for sanitization either hot water or chemical.

Each system is manufactured under strict Quality Control procedures conforming to ISO 9001:2000. To assure the system is ready for fast startup in your facility, each system is wet factory acceptance tested (FAT) prior to shipment.

USPure systems are backed by one of the largest and most experi-enced service networks in Canada. We offer 24/7 service support with a fleet of stocked service vehicles.

3,600 tO 28,800 GALLOns peR DAY

USPURE SYSTEMpARt

numbeRpeRmeAte

(Gpm)eLeCtRiCAL LOAD

(KW)membRAne

(40”)inLet (in.)

peRmeAte (in.)

sAnitiZAtiOn tYpe

DimensiOnsL X D X W (Cm)

2.5 C 2.5 10 (3) 4” 1 0.5 Chemical 538 x 213 x 2416 C 6.0 10 (6) 4” 1 0.75 Chemical 538 x 213 x 241

10 C 10.0 20 (3) 8” 2 1.0 Chemical 538 x 213 x 24115 C 15.0 20 (4) 8” 2 1.0 Chemical 538 x 213 x 24120 C 20.0 20 (4) 8” 2 1.5 Chemical 538 x 213 x 2412.5 H 2.5 30 (2) 4” 1 0.5 Hot Water 538 x 213 x 2416 H 6.0 30 (4) 4” 1 0.75 Hot Water 538 x 213 x 241

10 H 10.0 40 (3) 8” 2 1.0 Hot Water 538 x 213 x 24115 H 15.0 40 (4) 8” 2 1.0 Hot Water 538 x 213 x 24120 H 20.0 40 (4) 8” 2 1.5 Hot Water 538 x 213 x 241

Reverse Osmosis machinesbiOLAb - uspuRe seRies


80

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


VPURE 4400 H

pARt numbeR vOLtAGe1 pRODuCt FLOW FeeD FLOW RO pump DistRibutiOn pump2

HOusinGsGpm Lpm Gpm Lpm Hp Hp Gpm

VPure 2.5 208VAC/3PH/60HZ 2.5 9.5 3.3 12.5 2.0 1 1/2 15 2

VPure 5.0 208 VAC/3PH/60HZ 5.0 18.9 6.7 25.4 3.0 1 1/2 15 4

VPure 7.5 208 VAC/3PH/60HZ 7.5 28.4 10.0 37.9 5.0 1 1/2 15 6

VPure 10.0 208 VAC/3PH/60HZ 10.0 37.9 13.3 50.3 5.0 1 1/2 15 8

Specifications at 25°C (77°F).Other voltages are available upon request.Feed water requirements and other specifications are available upon request.1 There are two addtional voltage options avaiable. 480VAC/3PH/60HZ & 600VAC/3PH/60HZ.2 There is the option of a 30 GPM / 2 HP Distribution Pump. Each Distribution Pump oprates at a pressure of 70 psig at the rated flow

Typical ApplicationsPharmaceutical/BiotechMedical Device rinsingCosmetic manufacturingFeed to Stills or Pure Steam GeneratorCentral Lab Water

Standard Features2.5, 5.0, 7.5 & 10.0 gpm RO Permeate Flow RatesCSA, UL approved NEMA4/12 Control Panel All Stainless Steel Process PipingSanitary 316L Stainless Steel Permeate PipingManual and Air Actuated Tri-clamp Ball ValvesAllen Bradley PLC w/Colour Graphics HMISanitary 304 SS RO Membrane VesselsSanitary Permeate Sample ValvesAir Actuated Spring Return Automated Valves30dB Air Compressor to operate valvesVFD on RO & Distribution Pumps

Available OptionsElectrodeionization (EDI) Polishing System316 SS SDI Polishing tanksPost RO, SDI or EDI 0.1 micron final filterRemote Monitoring Capability via the InternetFAT, SAT, IQ, OQ documentationAccess Key Information From A Remote Location Via InternetSingle Lamp Vertical Mount 254 nm Ultraviolet Disinfection SystemWet factory Acceptance TestUninterruptible Control Power Supply

The Vpure 4400H is a value designed USP grade water system for use in bacteria controlled applications in the Life Science market. The base system is a compact hot water sanitizable RO system with an option for Service DI (SDI) or an Electrodeionization (EDI) system to polish the RO permeate.

The system generates Purified Water, stores it and delivers it to the loop. System has a self-contained compresser and electric heat exchanger, saving on integrating expensive plant utilities. Energy saving features have been included to minimize the impact on the environment.

USP PURIFIED WATER SYSTEM WITH HOT WATER SANITIZATION

Reverse Osmosis machinesbiOLAb - vpuRe 4400 H

81

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


eLGA Water purification systems puReLAb ® WAteR puRiFiCAtiOn sYstems

PURELAB® Water Purification Systems are constructed from the highest quality components to ensure optimal purity, while a rapid and easy sanitization program contributes towards an uninterrupted workflow. Built-in economical processes result in the lowest consumable costs with the highest water quality and precision.

P U R E L A B WAT E R P U R I F I C AT I O N S S Y S T E M SpARt numbeR pRODuCt DesCRiptiOn

PURELAB Ultra Ultra Pure Water for Absolute Confidence in Your Results

PURELAB flex Adaptable Single System For All of Your Type I - Type III Needs

PURELAB Classic Cost Effective Ultra Pure Water (Type I) Without Compromise

PURELAB Option-Q Tap to Ultra Pure Type 1 Water Using a Single Purification System

PURELAB UHQ Low Cost, Low Volume Ultra Pure Type I Water

CENTRA R200 Feed Several Laboratories with Type I, Type II and Type III Water

PURELAB Pulse High Quality, High Volume Type II & II+ Water for General Laboratory Applications

PURELAB Option-R High Quality, High Volume Type II & II+ Water for General Laboratory Applications

PURELAB Option-S High Quality, High Volume Type II & II+ Water for General Laboratory Applications

PURELAB 7000 Integrated Purification, Storage and Distribution System for General Laboratory Applications

PURELAB Prima Reliable Type III Water For Primary Grade Applications

PURELAB 3000 High Usage, High Purity Water for General Laboratory Use and Multiple Application Points

CentRA ® WAteR sYstemsCENTRA® Water Purification Systems are a complete water purification, storage and distribution system packaged into a single unit. The CENTRA design overcomes the limitations of traditional central water purification systems to deliver consistent water purity, flexibility and economy.


CENTRA S200 Feed Several Laboratories with Type I, Type II and Type III Water

CENTRA-R 60/120 Integrated Purification, Storage and Distribution System for General Laboratory Applications

meDiCA ® WAteR puRiFiCAtiOn sYstems

MEDICA® Water Purification Systems are reliable, compact water purification systems with in-built wrap-around reservoirs occupy a minimal amount of precious lab space. Constructed from the highest quality components, the MEDICA range ensures bacterial control and optimal purity, as well as an uninterrupted workflow.


MEDICA 7/15 Feed Clinical Diagnostic Analyzers With Low Volume, Low Cost Clinical Laboratory Reagent Water (CLRW)

MEDICA Pro Single High Flow Purification System for Large or Multiple Clinical Diagnostic Analyzers

MEDICA R200 Assured Clinical Laboratory Reagent Water (CLRW) For Multiple Analyzers

b iOpuRe ® WAteR puRiFiCAtiOn sYstemsBIOPURE® Water Purification Systems are reliable water purification systems that employ the latest technologies to ensure a broad removal of impurities, continual bacterial destruction and endotoxin removal. A compact design with an in-built wrap-around reservoir ensures a minimal amount of precious hospital or surgery space is occupied.


BIOPURE 7/15 Space Saving Purification System for Washer Disinfectors and Autoclaves

BIOPURE 60/120 Single System Purification for Washer Disinfectors and Endoscope Reprocessors

BIOPURE 200/600 Compliant, High Volume Water for Multiple Washer Disinfectors and Endoscope Reprocessors

82

Re

ve

Rs

e O

sm

Os

is e

qu

ipm

en

t


e-Cell® Replacement modules Ge ® e -CeLL ® RepLACement mODuLes

E-Cell™ modules are a revolution in chemical-free deionization. E-Cell™‘s robust, modular electrodeioniza-tion (EDI) technology is cost-effective for all flow rates. No regeneration chemicals are needed, no hazard-ous waste stream is produced, operation is simple and continuous, and facility requirements are reduced.

E-Cell™ modules are used in many high purity applications and after years of usage, the system may not be operating at optimal efficiency, your production requirements may have changed or you may be experi-encing troubleshooting problems. Whatever your need our experienced service technicians can assist you in evaluating your overall system and process requirements. Individual modules are available for replace-ment and installation by a qualified service technician can be arranged whether you bought the original equipment from Mar Cor/Biolab or not.

E - C E L L R E P L AC E M E N T M O D U L E SpARt numbeR pRODuCt DesCRiptiOn

3018626 MK-3, 15 gpm, Industrial

3020056 MK-3 Pharm, 18gpm, Pharmaceutical

3041172 MK-3 Pharm HT, 18gpm, Pharmaceutical, Hot Water Sanitizable

3018627 MK-3 Mini, 5gpm

3044124 MK-3 Mini HT, 5gpm, Pharmaceutical, Hot Water Sanitizable

3019185 MK-2E, 15gpm, Industrial

3019230 MK-2 Pharm, 18gpm, Pharmaceutical

3019225 MK-2 Pharm HT, 18gpm, Pharmaceutical, Hot Water Sanitizable

3019231 MK-2 Mini, 5gpm

3019226 MK-2 MiniHT, 5gpm, Pharmaceutical, Hot Water Sanitizable

Module Descriptions

• mK-3 mini stD is designed for any market that requires high purity water, including Power, Semi-conductor and Pharmaceutical. Each individual MK-3 stack produces a nominal 5gpm (1.5 m3/hr), and has a flow rate range of between 2 to 6.5gpm (0.5 to 1.5 m3/hr).

• mK-3 maxi stD. is designed for any market that requires high purity water, including Power, Semiconductor and Pharmaceutical. Each individual MK-3 stack produces a nominal 15gpm (3.4m3/hr), and has a flow rate range of between 15 to 20gpm (3.4 to 4.6m3/hr).

• mK-3 mini pharma Ht are designed for pharmaceutical applications and are hot water sanitiz-able. Each individual stack produces a nominal 5gpm (1.14 m3/hr), and has a flow rate range of between 2 to 7gpm (0.5 to 1.52 m3/hr).

• mK-3 maxi pharma Ht are designed for pharmaceutical applications and are hot water sanitiz-able. Each individual stack produces a nominal 18 gpm (4.1 m3/hr), and has a flow rate range of between 7 to 20 gpm (1.6 to 4.6 m3/hr).

• mK-2 mini is designed for any market that requires high purity water, including Power, Semicon-ductor and Pharmaceutical. Each individual MK-3 stack has a flow rate range of between 2.5 to 5 gpm (0.57 to 1.14m3/hr).

• mK-2e is designed for any market that requires high purity water, including Power, Semiconduc-tor and Pharmaceutical. Each individual MK-3 stack has a flow rate range of between 7.5 to 15gpm (1.74 to 3.4 m3/hr).

• mK-2 mini Ht are designed for pharmaceutical applications and are hot water sanitizable. Each individual stack has a flow rate range of between 2 to 6gpm (0.57 to 1.37 m3/hr).

• mK-2 pharm Ht are designed for pharmaceutical applications and are hot water sanitizable. Each individual stack has a flow rate range of between 7 to 18 gpm (1.6 to 4.1 m3/hr).

Cleaners &disinfeCtants

Cleaners &disinfeCtants

83

Cl

ea

ne

rs

& D

isin

fe

Ct

an

ts

84

Cl

ea

ne

rs

& D

isin

fe

Ct

an

ts


MINNCARE COLD STERILANTPart

nuMber DesCriPtion siZe

78338-000 Minncare Residual Test Strips 100/Vial78339-000 Minncare 1% Test Strips 100/Vial

MINNCARE COLD STERILANTPart

nuMber DesCriPtion QuantitY

78399-647 Minncare Cold Sterilant packaged in (4) single quarts 1 case78399-646 Minncare Cold Sterilant packaged in (4) single gallons 1 case

78399-648 Minncare Cold Sterilant 40 gallons packaged in single 55 gallon drum(for shipping and handling purposes) 1 drum

system Disinfectants MinnCare ® ColD sterilant

MinnCare ® test striPs

Minncare Cold Sterilant is an effective disinfectant and sterilant for hard surfaces commonly found in pharmaceutical cleanrooms. Surfaces made from non-porous materials such as plastics, stainless steel or glass can be disinfected using Actril Cold Sterilant solutions. Examples include counter tops, walls, floors, etc.

Minncare Cold Sterilant is a powerful disinfectant containing a proprietary mixture of 4.5% peracetic acid and 22% hydrogen peroxide. It is effective against a broad spectrum of organisms, including bacterial spores, fungal spores, bacteria, mycobacteria, yeast, molds and viruses. It is a powerful oxidizer that attacks and breaks down the organic components of microorganisms, not just killing them, but destroying their structure. This makes Minncare Cold Sterilant one of the fastest acting and most effective disinfectants available.

features and benefits• Superiorbiocidalactivity,makingiteffectiveagainstspores,bacteria,virusesandother

organisms.• Doesnotproduceanytoxicaldehydevapors,keepingyouremployeesafe.• Compatiblewithallcommoncleanroomsurfaces,keepingyourfacilitysafe.• Easilydisposableandbiodegradable,keepingtheenvironmentsafe.• Filteredthrough0.2micronfilters.• Canbeusedasagermicidaldisinfectantsprayorasacleaner/sanitizerwhendiluted

properly.• RegisteredwiththeUSEnvironmentalProtectionAgency(EPA).• Registered in Canada as DIN 02277484

WARNING: The disinfectants listed above contain hazardous components. Refer to the individual Material Safety Data Sheets (MSDS) for specific information on proper handling, personal protective equipment and disposal methods. This information is available upon request. Contact us for disinfecting guidelines or mixing directions for your specific requirements.

MinnCare® 1% test striPs Minncare 1% Test Strips verify adequate concentration of a 1% Minncare solution during disinfection of your high purity water system. These convenient dip-and-read strips can be used at any test port in your system to provide an accurate pass/fail measurement of Minncare solution.

MinnCare® resiDual test striPs Minncare Residual Test Strips are easy to use and are conveniently packaged 100 test strips per container. Each strip has a “reaction zone” pad located at one end of the strip. When stored and used properly, the test strip pad can indicate residual Minncare levels as low as 1 part per million (ppm). The reaction zones are set to provide six different reading levels at 100, 30, 10, 3, 1 and 0 (zero) parts per million.

Both the Minncare 1% Test Strips and the Minncare Residual Test Strips may be used up to the date of expiration printed on the container even after opening. There is no need to separately record and verify container opening dates.

85

Cl

ea

ne

rs

& D

isin

fe

Ct

an

ts


AC TRIL COLD STERILANTPart


78400-258 Actril Cold Sterilant, 6 x 1 liters 1 case78400-446 Actril Cold Sterilant, 2 x 5 liters 1 case

aCtril ® ColD sterilantActril Cold Sterilant is an effective, ready-to-use (no dilution required) disinfectant and sterilant for hard surfaces commonly found in pharmaceutical cleanrooms. Surfaces made from non-porous materials such as plastics, stainless steel or glass can be disinfected using Actril Cold Sterilant solutions. Examples include counter tops, walls, floors, etc.

Actril Cold Sterilant is a powerful disinfectant containing a proprietary mixture of 0.08% peracetic acid and 1.0% hydrogen peroxide. It is effective against a broad spectrum of organisms, including bacterial spores, fungal spores, bacteria, mycobacteria, yeast, molds and viruses. It is a powerful oxidizer that attacks and breaks down the organic components of microorganisms, not just killing them, but destroying their structure. This makes Actril Cold Sterilant one of the fastest acting and most effective disinfectants available.

features and benefits• Superiorbiocidalactivity,makingiteffectiveagainstspores,bacteria,virusesandother

organisms.• Doesnotproduceanytoxicaldehydevapors,keepingyouremployeesafe.• Compatiblewithallcommoncleanroomsurfaces,keepingyourfacilitysafe.• Easilydisposableandbiodegradable,keepingtheenvironmentsafe.• Filteredthrough0.2micronfilters.• Canbeusedasabroadspectrumdisinfectantorasagermicidaldisinfectantspray.• RegisteredwiththeUSEnvironmentalProtectionAgency(EPA).• Registered in Canada as DIN 02001020

Actril Cold Sterilant, already used in clean rooms for 20 years, is now even easier to use in these critical environments. Actril Cold Sterilant has been opti-mized for the clean room environment by packaging it to bring straight into the clean room suite. No longer does the product need to be cleaned and wiped down to bring it into these critical environments. Because of the unique method of disinfection, Actril does not have to be part of a rotation of disinfectants program.

features and benefits• CleanRoomPackaged&EtOProcessed• No Measuring or Mixing• ThreeTimesFasterOrganismKillthanMinncareSolution• Filteredto0.2micron• FormulatedforUseintheSterilizationandDisinfectionofHardSurfaces• Registered in Canada as DIN 02001020

surface Disinfectants

aCtril ® ColD sterilant CleanrooM PaCkaging

AC TRIL COLD STERILANTPart


78400-340 Actril Cold Sterilant, 6 x 1 liters, double bagged 1 case176-02-051 Actril sprayhead for liter bottles 1 each

86

Cl

ea

ne

rs

& D

isin

fe

Ct

an

ts


DRYFOGSYSTEMPart

nuMber DesCriPtion

290-01-021 DryFogAssembly26L,7u,1nozzle290-01-022 DryFogAssembly26L,7u,2nozzle290-01-023 DryFogAssembly26L,7u,3nozzle290-01-024 DryFogAssembly26L,7u,4nozzle

surface Disinfectants MinnCare DrY fog ™ sYsteM

Anintegralpartofmoderncleanroomdisinfectionprocedures,theMinncareDryFogsystemprovides an easy to use, high technology solution for clean room and critical area fogging. The combination of our highly effective Minncare® Cold Sterilant chemical and our state of theartDryFogdeliverysystemenablesuserstorapidlyandsafelydeliver Minncare vapor to even the most complex areas.

Its sanitary and autoclavable design will permit its use in the most critical areas within pharmaceutical and other industries concerned with maintaining the utmost levels of sterility. The location and action of the dry fogging head at the highest point of the equipment allows for rapid vapor dispersion and ensures that the most distant areas are reached effectively.

applications• Itcanbeusedincleanroomsinavarietyoffacilitiesincluding: -Pharmaceutical - Biotechnology - Animal research facilities - Medical device manufacturers.

features and benefits• ShortProcessTime The lack of toxic aldehyde vapors results in extremely short process times — over 95%

faster than some conventional systems. This means less production downtime and lower total costs. Typically, the entire process can be completed in less than 3 hours, depending upon room size and ventilation system efficiency, compared to up to 3-5 days with some conventional systems.

• UltrafineDroplets TheDryFogequipmentisdesignedtoproducefinedropletsthataverage

7.5 microns in diameter which will ensure even dispersion of the Minncare solution throughout the room. These small droplets will tend to bounce off of solid surfaces and thus avoid excessive condensation, corrosion and surface wetting issues associated with systems producing larger droplets. The small droplets evaporate and the vapor will penetrate normally inaccessible areas and lead to a more effective process.

• HighlyFlexibleSystem The system is easily adaptable to differing room dimensions and

configurations and can be adjusted to suit any room height. It is readily transportable and can be used in multiple locations, needing only a compressed air source to operate. It will deliver an adequate solution quantity to rooms up to 35,000ft3 (1000m3). Beyond this size, multiple machines may be required.

• OptimalEfficacy Minncare Cold Sterilant is a peracetic acid and hydrogen peroxide based proprietary

chemistry developed by Minntech for optimized biocidal efficacy. It is registered by theEPAforuseasafogtoenhanceexistingcleaninganddisinfectionprocess.Itisfullybiodegradable and will leave no measurable air residuals once the room has been fully ventilated. Minncare Cold Sterilant contains only pharmaceutical quality raw materials, limiting the introduction of any undesirable components into the clean room environment.

87

Cl

ea

ne

rs

& D

isin

fe

Ct

an

ts


ACID CLEANERPart

nuMber DesCriPtion Cleaner QuantitY

3024996 Minnclean AC LowpH 1x10 lb contatiner3024997 Minnclean AC LowpH 2x10 lb container

ALKALINECLEANERPart

nuMber DesCriPtion Cleaner QuantitY

3024998 MinncleanTF HighpH 1x10 lb contatiner3024999 MinncleanTF HIghpH 2x10 lb container

Dry Chemical Cleaners MeMbrane Cleaners

MinnClean® tffeatures and benefits • Foruseonthinfilmcomposite(polyamide)ROsystemmembranes.• Formulatedtoremoveorganicfoulantssuchasgrease,oils,grimeandbiologicalmatter.• TFisanalkaline,highpHcleaningproduct.

MinnClean® aCfeatures and benefits• Foruseonthinfilmcompositemembranes(polyamide),celluloseacetatemembranesandpolysulfone

membranes.• Formulatedtoremovemineralscalefromthemembranesurface.• ACisanacidic,lowpHcleaningproduct.

AVISTATECHNOLGIESPart

nuMber DesCriPtion

P111 RoCleanP111,HighpHROMembraneCleaner-Powder,45lbs.PailP303 RoCleanP303,LowpHROMembraneCleaner-Powder,45lbs.Pail

ROCLEANP11190 RoCleanP111,HighpHROMembraneCleaner-Powder,90lbs.FibreCarboyROCLEANP30390 RoCleanP303,LowpHROMembraneCleaner-Powder,90lbs.FibreCarboy

VITEC3000 Vitec®3000,Antiscalant/Dispersant,45lbs.Pail

Chemical Cleaners aDDitional Cleanersavista teChnologiesAvista Technologies is devoted exclusively to the supply of specialty chemicals and technical support services for the membrane separation industry, specifically reverse osmosis and nanofiltration.

KINGLEETECHNOLGIESPart

nuMber DesCriPtion

DIAMITEAFT DiamiteAFTLiquidMembraneCleanerDIAMITELPH DiamiteLpHLiquidMembraneCleaner

king lee teChnologiesWithover25yearsofcompanyexperience,KingLeeTechnologieshaslongbeenrecognizedastheleaderin membrane process chemistry and technical service.

ALPHACHEMPart

nuMber DesCriPtion

SO431025KG SodiumMetabisulfite,25KGSO43102KG SodiumMetabisulfite,2KG

alPhaCheM liMiteDAlphachem currently distributes over 4,000 chemicals for the laboratory, pharmaceutical, food, coatings, cosmetic, and plating industries.

TESTKITS/ SUPPLIESPart

nuMber ProDuCt DesCriPtion

HA2231-01 Free&totalchlorinetestkitHA2231-02 FreechlorinetestkitHA2231-03 Total chlorine test kitHA14076-99 DPDtotalchlorine,100pak,5mlHA14076-28 DPDtotalchlorine,1000pak,5mlHA14077-99 DPDfreechlorine,100pak,5mlHA282-32 Potassiumhydroxide8N,118mlHA947-99 Calver 2 - reagent, 100 pakTESTKIT4P RO maintenance test kitHA854-99 FerroverPP25ml100perpakHA943-99 Bromcresol green methylred 100 per pakHA1407699 DPDTotalChlorine,100pk,pillowsHA1407628 DPDTotalChlorine,1000pk,pillowsHA1407799 DPDFreeChlorine,100pk,pillowsHA1407728 DPDFreeChlorine,1000pk,pillows

Getinstantresultswhentestingforchlorinelevelsinwater.Lowconcentrates of free, total, and various forms of combined chlorine are determinedcolourimetricallyusingDPDtabletsorliquids.Theportabletest kit includes all of the necessary reagents and labware. Test kit is furnishedwith(50)DPD#1and(50)DPD#3tabletsalongwithoctetcomparator and test tubes. Complete in a padded plastic case.

88

Cl

ea

ne

rs

& D

isin

fe

Ct

an

ts


Water Quality testing Products test kit/suPPlies

features and benefits• Easytousewithaccurateresults.• Portablecaseletsyoutakeitwithyou.

TESTKITS&SUPPLIESPart

nuMber DesCriPtion

HA145700 HardnessTestKit,Total&Calcium

HA42432 Hardness1,solution,Buffer,100ml

HA42532 Hardness2,solution,ManVer,100mlHA42632 Hardness3,solution,Titrant,100ml

MHPC10025 HeterotrophinPlateCulture,25pkHA5167 ChlorineTestStrips.HiSenseUltra,5bottlesof100

HA811911 HardnessTestStrip,720ppm,6bottlesof50HA424-32 HardnessI,reagent,118mlHA425-32 Manver hardness 2, 118 mlHA426-32 Titrant hardness

Water Quality testing Products

89

pr

oc

es

s c

on

tr

ol

sPRocesscontRolsPRocess

contRols

BADGER TOTALIZING ME TERSpArt

number cAse operAtInG rAnGe (Gpm)

DIAmeter (In.)

RCDL 25PN-5/8 Thermoplastic 1/2 - 25 5/8”RCDL 25PN-3/4 Thermoplastic 1/2 - 30 3/4”

RCDL 40PN Thermoplastic 3/4 - 50 1”RCDL 35 Bronze 3/4 - 35 3/4”RCDL 70 Bronze 1-1/4 - 70 1

90

pr

oc

es

s c

on

tr

ol

s

800-268-5035 / 800-268-0032 (Quebec) / www.mcpur.com / mAr cor purIfIcAtIon

pressure Gauges bourDon tube pressure GAuGesIndustrial Strength Liquid-Filled Gauges. The Type 212.53 series is designed with a stain-less steel case that offers protection from corrosive environments. Being liquid-filled helps to dampen the effects of vibration and pulsation. It also lubricates the movement which extends the life of the gauge.

specifications• Case-Stainlesssteel/PaintedSteel• Ring-Stainlesssteel• BourdonTube&Socket(WettedParts)-Copperalloy• Window-Polycarbonate(2-1/2”)Acrylic(4”)• Dial-ABS• Pointer-BlackAluminum• O-ring-EPDM• Liquidfilling-Food-gradeglycerine• Accuracy-±1.5%ofspan(2-1/2”)±1.0%ofspan(4”)

BOURDON TUBE PRESSURE GAUGESpArt

number cAse psI rAnGe

DIAmeter (In.)

mountInG connectIon

npt con sIZe (In.) lIQuID fIlleD

type 111.10, painted steel case4241291 Painted Steel 0-100 2 Bottom 1/4 NO

type 233.53 - liquid-filled case7265981 Stainless Steel 0-100 2 Bottom 1/4 YES

50268686 Stainless Steel 0-100 2-1/2 CenterBack 1/4 YES

totalizing meters bADGermeter ®

BadgerMeter Recordall® Disc meters provide effective metering solutions for a wide variety of small andintermediateserviceapplications.Whenitcomestowatermeters,performanceandreliabilityarethekeymeasures.BadgerMeter’srecordoflong-termperformanceinthefieldensuresthehighest revenue generation from their metering system. The Recordall Disc meter line has been certifiedtocomplywithANSI/NSFStandard61.Allcomponentswithinthethermoplasticmeter,i.e.,disc,chamber,housing,O-rings,etc.,comprisethecertifiedsystem.

recorDAll® DIsc meters

ApplicationsForuseinmeasurementofpotablecoldwaterinresidential,commercial/industrialserviceswhereflow is in one direction only.

specificationsConstruction-BadgerRecordallDiscmeterconstruction,whichcomplieswithANSI/AWWA

standardC710,consistsofthreebasiccomponents:meterhousing,measuringchamber,and permanently sealed register. The water meter is either thermoplastic or bronze with externally-threaded spuds. A corrosion-resistant thermoplastic material is used for the measuring chamber.

MagneticDrive-Throughtheuseofhigh-strengthmagnets,providespositive,reliableanddependableregistercouplingforstraight-reading,remoteorautomaticmeterreadingoptions.

Maintenance - Badger Recordall Disc meters are designed and manufactured to provide long-term service with minimal maintenance.Whenmaintenanceisrequired,itcanbeperformed easily either at the meter installation or at any other convenient location.

Connections-Tailpieces/Unionsforinstallationsofmetersonvariouspipetypesandsizes,includingmisalignedpipes,areavailableasanoption.

MaximumOperatingTemperature-80°F(26°C).MaximumOperatingPressure-150psi(10bar).MeasuringElement-Nutatingdisc,positivedisplacement.

BADGER TOTALIZING ME TERSpArt

number cAse operAtInG rAnGe (Gpm)

DIAmeter (In.)

RCDL 25PN-5/8 Thermoplastic 1/2 - 25 5/8”RCDL 25PN-3/4 Thermoplastic 1/2 - 30 3/4”

RCDL 40PN Thermoplastic 3/4 - 50 1”RCDL 35 Bronze 3/4 - 35 3/4”RCDL 70 Bronze 1-1/4 - 70 1

91

pr

oc

es

s c

on

tr

ol

s

mAr cor purIfIcAtIon / www.mcpur.com / 800-268-5035 / 800-268-0032 (Quebec)

CONDUC TIVIT Y/RESISTIVIT Y SENSORpArt

number fIttInG InsertIon lenGtH

cAblelenGtH

fIttInGmAterIAl

240-201 3/4” NPTM 1.35” 1.5ft(0.5m) Teflon/SS

M300 CONDUC TIVIT Y/RESISTIVIT Y INSTRUMENT

pArtnumber DescrIptIon

58-001-314 110VAC(24VDC)

SENSOR PATCH CORDSpArt

number DescrIptIon

1010-67 10ft(3.0m)1025-66 25ft(7.6m)1110-66 100ft(30.5m)1115-66 150ft(45.7m)

processing controls tHornton conDuctIvIty/resIstIvIty monItor

sensors AnD pAtcH corDs

features and benefits• Largebacklit4-linedisplay• Compact¼DINpanel-mountingwithNEMA4X,IP65panelseal• Robust½DINwall-mountingwithNEMA4X,IP65backcover• User-selectabledual-levelpasswordprotection• InternalPIDcontrolwithrelayoranalogoutput• USBportforconfigurationanddataacquisition• Directsensorinputsforallparameters• CompatiblewithexistingThorntonsensors• Plug-interminalconnectorsforeasywiring• UniversalAC/DCpowersupply• Multiplelanguages:English,French,German,Italian,Spanish• CEcompliant,ULListedforUSandCanadianstandards• Model:58-001-314 - 2-channel -½DINWallmount - 4 analog / 4 relay -Highestaccuracymeasurement&temperaturecompensation -Widerangeofmeasurements:Conductivity,Resistivity,Temperature, TotalDissolvedSolids(ppm/ppb),%Rejection,andmore.

Applicationspure and ultrapure water treatmentforsemiconductorrinsing,criticalpower/steammakeupandpharmaceuticalwaters.

semiconductor processing in rinsers and wet benches with precise resistivity measurement and temperature.

power plant cycle chemistry and stator cooling monitoring with exceptionally accurate temperature compensation for specific and cation conductivity and pH and very low maintenance dissolved oxygen measurement.

pharmaceutical watermonitoringtomeetUSP,EP,andJPconductivityrequirements including built in tables of alarm limits.

reclaim, recycle and wastewater treatment for the above industry applicationsforcontaminantdetection,diversionandneutralization.

Note: Other instruments, sensors and cords are available.

specificationsFor a 0.1/cm constant sensorsConductivityrange: 0.02µs/cmto600µs/cmResistivityRange:0.0017M½-cmto50M½-cmOperatingTemperatureRange:32ºF(0º)to200ºF(93ºC)MaximumOperatingPressure:250psi(17.2bars)Accuracy(withcalibration):±1%(cellconstantaccuracy)TotalSystemAccuracy:±2.5%ofreadingTemperatureAccuracy:±0.1ºC@25ºCTemperatureSensor:1000½PtRTD

ACCESSORIESpArt number proDuct DescrIptIon

PC 115VPowercord(8ft.withplugandstrainrelief )SMP50 Surface Mounting Plate for 750 Series

CONDUC TIVIT Y CELLpArt number cAble lenGtH (ft.)

CS51-10 10CS51-25 25

RESISTIVIT Y CELLpArt number cAble lenGtH (ft.)

CS10-S-10 10CS10-S-25 25

RESISTIVIT Y MONITER - ANALOGpArt number rAnGe

752II-1 0-20 meg752II-2 0-2 meg

CONDUC TIVIT Y MONITER - ANALOGpArt number rAnGe

58-001-314 110VAC(24VDC)757II-113 0-100µs757II-114 0-100 ppm757II-115 0-200µs

92

pr

oc

es

s c

on

tr

ol

s


processing controls

resistivity Applications• Deionization(DI)anddistillation

ultrapure water treatment systems

• Electronics• Pharmaceuticals• Laboratories• FoodProcessing• Plating

myron l

Myron L offers a proven way to measure water source impurities. The advanced circuitry of the 750II series Conductivity Monitor and Resistivity Monitor guarantees accurate and reliable measurement. Driftfreeperformanceisassuredbystate-of-the-artelectronics,includinghighlyaccuratedrivevoltage.

conductivity Applications• ReverseOsmosis• SeawaterDesalinization• WasteTreatment• FoodProcessing• Plating• Laboratories

features and benefits• Dualthermistorautomatictemperature

compensation.• HeavyDuty10amprelay.• Internalsetpointdiscourages unauthorizedadjustment.• Push-to-testsetpointcheck-

LEDs show “above/below.”• NEMA3corrosion-proofenclosure.

conDuctIvIty AnD resIstIvIty monItors - serIes II

TheConductivityMonitorusestheCS51cell(1.0cellconstant),recommendedforrangesof0-20through20,000µsorppm.Thesturdy3/4”NPTpolypropylenebushingismodularforeasy,inexpensivereplacement.The Resistivity Monitor uses a CS10 series cell. This reliable sensor is constant at 0.05.Thesturdy3/4”NPTpolypropylenebushingismodularforeasy,inexpensivereplacement.

specificationsTemp Compensation - two integral thermistors provide automatic TC to 25°C

between32-212°F(0-100°C).Pressure/Templimits-100psi(690kPa)@212°F(100°C).Cable-24ga.shielded;10’(3meters)standard;25’and100’(8and30meter)lengths

available.100’ismaximumrecommended.Dimensions-metalportion1.2”(30mm)L;0.5”(13mm)dia.

conDuctIvIty AnD resIstIvIty cells

specificationsReadout - Model 750II - 2 1/2” monitor.Accuracy - Model 750II-±2%offullscale.Sensitivity and Stability - 0.05%offullscale.Repeatability - 0.1%offullscale.Cell inputs - 1(3inputoptionavailable).Relay function - Singlesetpointcontrol-Fullyadjustable0-100%offullscale. Indicators-above(green)andbelow(red)setpointLEDs. Contactrating-SPDT10amp@250VAC,30VDC.Power - 115VAC,50/60Hz,±15%(changeableto220VAC),25mA.Dimensions - 750IIseries-6”Hx4.8”Wx3.8”D.Ambient Temp Range - -22°Fto140°F(-30°C-60°C).Weight-750IIseries-2lbs(0.9kg).

NOTE: Pictures show digital, not analog, readouts.

PARAME TERSrAnGes AccurAcy

moDel conDuctIvIty tDs pH temp. conDuctIvIty pH temp.

TP1 0-9999µS10-20.00µS

0-9999ppm10-20.00ppt - 32-160°F

(0-70°F)±1%

of reading - ±0.1°c/f

TPH1 0-9999µS10-20.00µS

0-9999ppm10-20.00ppt 0-14 32-160°F

(0-70°F)±1%

of reading+0.02

pH ±0.1°c/f

RESISTIVIT Y CELLpArt number proDuct DescrIptIon

TP1 Conductivity,TDS,TemperatureTPH1 Conductivity,TDS,pH,Temperature

93

pr

oc

es

s c

on

tr

ol

s


portable process meters

The TechPro IIishand-held,lightweightandsimpletooperate.MeasuresConductivity,TDS,pH,andTemperature. These portable process analyzers are ideal for water treatment testing as well as other industrial and commercial testing and applications. The rugged and water proof case protects the electronics of the instrument and fits comfortably in your hand. This model also features auto shut-off to prolong battery life. Accuratereadingsin2easysteps: step 1 - Rinse and fill cell cup. step 2 - Push button to display reading.

myron l tecHpro IItm

ApplicationsBoilers&CoolingTowersReverse OsmosisWaterTreatmentPlatingandPartsWashingPaper&PrintingIndustryFood&BeverageProcess Control

specificationsCellCapacities:pH;0.04oz./1.2ml,Cond/TDS;0.2oz./5.0mlDisplay:4digitLCDDimensions:7.7x2.7x2.5in.(196x68x64mm)OperatingTemperature:32-132°F(0-55°C)Weight:11.2oz.(320g)CaseCellMaterial:ABSPower:9VbatteryBatteryLife:>100hours/5000readingsProtectionRatings:IP67/NEMA6Waterproof

features and benefits• LongLifeInternalelectrodestopreventbreakageand

prolongtheelectrodes’usefullife.• Autoshut-offtoprolongbatterylife.• EasytoUse.• Waterproofandbuoyant.• Keypadcalibration.• Measures0-14pH.• Full4digitdisplay.

vacuum breakersVACUUMBREAKERSPVC (BUNA-N, THD)

pArt sIZe number (In.)

VBM050V-PV 1/2

VBM075V-PV 3/4

VBM100V-PV 1

tHermoplAstIc

plAst-o-mAtIc serIes vbmfeatures and benefits• Protectstanksfromimplosionduringdraining.• Eliminateslossesanddangercausedbysiphoning.• Providessafetyforyoursystem.• Patenteddiaphragmdesign.• Self-sealingpreventsfugitiveemissionsandliquidsfromleavingsystem.• Tru-Uniondesign.Threadedconnectionsarestandard.

P O R TA B L E P R O C E S S I N S T R U M E N T - U LT R A M E T E RpArt number proDuct DescrIptIon

4PII Conductivity,TDS,Resistivity,6PII Conductivity,TDS,Resistivity,pH,ORP,Temperature

94

pr

oc

es

s c

on

tr

ol

s


MeasuresTDS,pH,ORP,conductivity,resistivityandtemperatureallinone.Thisportableprocessanalyzerisfastandaccurate.Bothmodelsareruggedenoughfordailyinlinecontrollerchecksinhostileprocessapplications.Simplicity through engineering allows you to get immediate results.step 1: Rinse and fill the cell cup. step 2: Push a parameter button. step 3:Takethereading.

features and benefits• Memorywhicheasilystoresandrecallsupto100readings.• Fullyautomatictemperaturecompensation.• Useradjustabletemperaturecompensation(upto9.99%/°C)whichalsoallowsTCtobe

disabled for those applications requiring non-compensated reading.• Useradjustableconductivity/TDSconversionratioforgreateraccuracywhenmeasuring

solutions not contained in the microprocessor.• Auto-shutoffmaximizesthelifeofthesingle9Vbatterytomorethan100hours/5000tests.• Thenon-volatilemicroprocessorprovidesdataback-up,evenwhenthebatteryischanged.

This assures all calibrations and memory data will be retained.• ExtendedlifepH/ORPsensorisuserreplaceableinthefield.• Built-inIRPortallowsyoutoconvenientlydownloadyourdata

toacomputer(requiresMyronLuDockTM accessorypackage).• RealTimeclockwithDate&Timestampallowsyouto

maintain the integrity of each individual reading.• ThelargecapacityKCIreservoirguaranteesextendedlife.• AcustomLCDhelpssimplifycalibrationandoperationbyusing

annunciators and prompts to indicate various conditions.

specifications (All models)Display:4digitLCDDimensions:7.7x2.7x2.5in.(196x68x64mm)Weight:12.4oz(352g)Case/ConductivityCellMaterial:VALOXTM

(GeneralElectric)CellCapacities:pH/ORP;0.04oz./1.2ml,

Cond/TDS/Res 0.2oz./5.0mlPower:9VbatteryBatterylife:>100hours/5,000readingsOperatingtemperature:32°to132°F(0°to55°C)Protectionratings:IP67/NEMA6

(waterproofto3ft./1meter)

portable process meters myron l ultrAmeter IItm

*442 Natural water standardTM Myron L Company **10K½-10M½.ORP = Oxygen Reduction Potential

MODEL FEATURES 4p II 6p II Conductivity/TDS Conductivity/TDS/pH features Resistivity/Temp Resistivity/Temp/ORP Autoranging X X AdjustableTemp.Comp. X X Adjustablecond./TDSratio X X Memory(100readings) X X Date&TimeStamp X X pHCalibrationPrompts X LowBatteryIndicator X X Auto-off X X

PARAMETERS pH orp conductivity tDs resistivity temperature ranges 0-14pH ±999mV 0-9999µs 0-9999ppm 10KOhm 0-71°C 10-200mS 10-200ppt 30MOhm 32-160°F in 5 autoranges in 5 autoranges resolution 0.01pH ±1mV 0.01(<100µs) 0.01(<100ppm) 0.01(<100KOhm) 0.1°C/F 0.1(<1000µs) 0.1(<1000ppm) 0.1(<1000KOhm) 1.0(>1000µs) 1.0(>1000ppm) 0.01(>1MOhm) Accuracy ±0.01pH ±1mV ±1%ofreading ±1%ofreading ±1%ofreading** ±0.1°C

Auto temperature compensation 0-71°C 0-71°C 0-71°C 0-71°C 32-160°F 32-160°F 32-160°F 32-160°F

Adjustable temperature compensation 0-9.99%/°C 0-9.99%/°C 0-9.99%/°C cond./tDs ratios preprogrammed KCI,442*,NaCl Adjustable cond./tDs ratio factor 0.20-7.99

M Y R O N L P O R TA B L E M E T E R S

pArt number rAnGe(s) recommenDeDstAnDArD solutIon

532M1 0-50,0-500,0-5000µs B,D,G

532T1 0-50,0-500,0-5000 ppm B,D,G

EP-10 0-10,0-100,0-1000,0-10,000µs K,M,O

EP 0-0.5,0-5,0-50,0-500,0-5000µs B,D,G

D2 0-10,0-20milliohms 14D1 11-15 milliohms 14

M Y R O N L P O R TA B L E M E T E R ACC E S S O R I E SpArt number proDuct DescrIptIon

UCC Ultrameter soft protective case with belt clipPTP Porta-Pak,portableDSmetercarryingcase,plastic

PK7 Porta-Kit,carryingcasewithstandard/buffersforpDSmeter model EP11/pH only

pH 4-Q pH4Buffer,quartpH 7-Q pH7Buffer,quart

pH 10-Q pH10Buffer,quartpH SS-Q pHSensorStorageSolution,quart

442-30-Q B,Standardsolution(30ppm/47µs),quart442-300-Q D,Standardsolution(300ppm/445µs),quart

442-3000-Q G,Standardsolution(3000ppm/3900µs),quart442-30,000-Q I,Standardsolution(30,000ppm/30,100µs),quart

KCI-70 K,Standardsolution(70µs/45ppm),quartKCI-700 M,Standardsolution(700µs/478ppm),quartKCI-7000 O,Standardsolution(7000µs/5687ppm),quart

14.0 Standardconductivitysolution(14.0),quart

95

pr

oc

es

s c

on

tr

ol

s


portable process meters myron l Ds & DIAlysAte metersDs metersareconductivityinstrumentswhichprovidefast,accurate,on-the-spotmeasurementoftotaldissolvedsolids.Theyhelppreventequipmentdamage,assureproductquality,andverify in-line instrumentation. Dialysate meters measure dialysate concentration and deliver fastandaccuratetestresults.Althoughlightinweightandcompactinsize,bothmetersare“tough“. Analog meters have 2-1/2” readouts. Highly stable solid-state circuitry provides accurate readings.

Applications (Ds meters)• Boilers/coolingtowers • Reverseosmosis• Deionizedwatersystems • Rinsewater• Plating/surfacefinishing • Wastetreatment• Printingsolutions • Electronics

specifications (all models)Calibration-Choiceofpartspermillion(ppm)/TDSor

microsiemens(µs)/micromhosconductivity.Accuracy-Analogmodels-±2%fullscale.Repeatability-±1%.Tempcompensation-Automatic(to25°C)between

50°and160°F(10°to71°C).Electrodes-Built-in,neverneedreplatinizing.Cellcup-Chipandcrackresistantpolyethylene.Circuitry-Solid-state,sealedagainstmoisture.Batteries-Oneortwo9voltsupplied,goodfor2000tests/1year.Dimensions-3.4”Wx4.5”Dx4.0”H.Weight-onepound(0.45kg).

532t1This meter offers three ppm ranges. It features a unique electronic Internal Standard for easy and fast field calibration and range doubling.

ep-10Withitsfourmicromhosranges,thismeterisidealformostwatertreatmentapplications.Itslowrangewillaccuratelytestboilercondensate;withtheRE-10RangeExtender,itcancheckprocesssolutionsupto100,000micromhos.

epThemostversatileofallDSmeters,itiscapableoftestingultra-pureandoceanwaters*andeverythinginbetween. Ithasfiveranges.Themostsensitiverangeincludesresistivityequivalents,makingitidealforDIwatersystems.

D1 and D2Dialysate meter features dual scales on the dial and can test both acetate and bicarbonate dialysate. Calibration is easy and fast with 14.0 solution.

*With RE-10 Range Extender Accessory

All conductivity and pH solutions used in factory calibration are NIST traceable. Model Number PK7 is used with a pDS meter. It is foam-lined and molded of sturdy ABS plastic.

pK7

96

pr

oc

es

s c

on

tr

ol

s


pressure relief / reducing valves WAtts ® pressure relIef/reDucInG vAlves

Series 3L Pressure Relief Valves are used in residential applications to protect against excessive pressure on domestic storagetanks,tanklesswaterheaters,andsolarheatingapplications.ItconsistsofabronzebodyconstructionwithNPTthreadedmaleinletandNPTthreadedfemale(drain)outletconnections,stainlesssteelspring,andtestlever.

3l serIes

3 L R E L I E F VA LV E SpArt number proDuct DescrIptIon

0011086 VALVE/PRESSREL/3L/BR/0.75IN/90PSI/WATTS0011089 VALVE/PRESSREL/3L/BR/0.75IN/90PSI/WATTS

N 36 R E L I E F VA LV E SpArt number proDuct DescrIptIon

0138515 VALVE/VACRELF/BR/0.5INMNPT/WATTS0138516 VALVE/VAC RELF/BR/0.75IN MNPT/N36M

SeriesN36WaterServiceVacuumReliefValvesareusedinwaterheater/tankapplicationstoautomaticallyallow air to enter into the piping system to prevent vacuum conditions that could siphon the water from the systemanddamagewaterheater/tankequipment.ItconsistsofabrassbodyconstructionwithNPTmaleinletconnection,andaprotectivecap.

n36 serIes

53 L R E L I E F VA LV E SpArt number proDuct DescrIptIon

0189747 VALVE/PRESSREL/BR/0.75IN/75PSI/WATTS0190001 VALVE/PRESSREL/53L/BR/0.5IN/90PSI/WATTS

Series 53L Pressure Relief Valves are used in residential applications to protect against excessive pressure on domesticstoragetanksandtanklesswaterheaters.ItconsistsofabronzebodyconstructionwithNPTthreadedmaleinletandNPTthreadedfemale(drain)outletconnections,stainlesssteelspring,andtestlever.

53l serIes

25 AU B - Z 3 R E D U C I N G VA LV E SpArt number proDuct DescrIptIon

0069717 VAL/PRV/BRS/50PSIG/.075IN,FT/WATTS

SeriesU5B-Z3HighPerformanceWaterPressureReducingValvesareusedincommercial,industrial,andresi-dential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption

25Aub-Z3 serIes

530 C R E L I E F VA LV E SpArt number proDuct DescrIptIon

0372271 VALVE/PRESS REL/BR/0.75IN/50-175PSI

Series530CCalibratedPressureReliefValvesareusedincommercial,residentialandindustrialapplicationstoprotectagainstexcessivepressureinsystemscontainingwater,oil,orair.Itconsistsofabronzebodyconstruc-tionwithNPTthreadedmaleinletandNPTthreadedfemale(drain)outletconnections,stainlesssteelspring,brassbonnet,Buna-Ndisc,andBuna-NO-ring.

530c serIes

U 5 B - Z 3 R E D U C I N G VA LV E SpArt number proDuct DescrIptIon

0053195 U5B-3/4BRZ PRES RED VA THRMBYPA25-75PSI"0052977 VAL/PRV/BRS/25-75PSIG/.050IN,FT/WATTS

Series25AUB-Z3WaterPressureReducingValvesareusedincommercialandresidentialapplicationstoreduceincoming water pressure for protection of plumbing system components and to reduce water consumption. It consistsofabronzebodyconstruction,unioninletconnection,integralstainlesssteelstrainerandhightem-perature resistant reinforced diaphragm for hot water.

u5b-Z3 serIes

Storage tankS& acceSSorieS

Storage tankS& acceSSorieS

97

St

or

ag

e t

an

kS

& a

cc

eS

So

rie

S

terrapure tank Part Product number deScriPtion complete tank System. ideal for pure water applications

CtS1183 125 gallon terrapure tank with pe stand, gallon indicator, (1) 2” WHC bottom center, (5) 1-1/2” WHC sides (top, 2 high, mid, low), (3) 3/4” WHC top, (1) spray nozzle with 1/2” WHC through tank lid.

CtS1184 250 gallon terrapure tank with pe stand, gallon indicator, (1) 2” WHC bottom center, (5) 1-1/2” WHC sides (top, 2 high, mid, low), (3) 3/4” WHC top, (1) spray nozzle with 1/2” WHC through tank lid. complete tank system. ideal for holding liquids or concentrates

CtS1130 125 gallon terrapure tank with pe stand, gallonage tape, (1) 1” WHC bottom center

CtS1130 250 gallon terrapure tank with pe stand, gallonage tape, (1) 1” WHC bottom center

CtS1131 250 gallon terrapure tank with pe stand, gallon indicator, (1) 1-1/2” WHC bottom center accessories

t10211 Gallonage tape for 125 tank

t10211 Gallonage tape for 250 tank

t10103 Cap, 6”, pe, Blue with formed gasket, viton

t10101 Cap only, 6”, pe, Blue

t10102 Formed gasket, Viton

98

St

or

ag

e t

an

kS

& a

cc

eS

So

rie

S

800-268-5035 / 800-268-0032 (Quebec) / www.mcpur.com / mar cor Purification

Storage tanks terraPure ®

Designed for the purest process waters or chemistries, the one-piece capsule shape design provides for complete drainage. a Viton®-gasketed 6” screw lid maintains nitrogen blanket pressure. unique, “no profile” fittings assure no internal tank protrusions to collect particles, and no crevices, welds or seams to support micro-bial growth. One-piece rotationally molded construction yields a rugged, seam-less, corrosion free container suitable for an almost unlimited num-ber of solution, storage and dispensing applications. the all-plastic, artfully engineered pedestal is molded entirely of Lpe (no metal re-inforcement). this unique tank stand is capable of supporting loads up to 4000 lbs. a convenient “mousehole” provides easy access to the bottom center fitting.

applications• IdealforDI,ROwater• Pharmaceutical• Semi-Conductor• Biotech• Laboratory• Hospital• ClinicalAnalysis

features and benefits• Totallyenclosed.• Gas-tightfornitrogenblanketing,noatmosphericintrusion.• 190°Fcapability,steam-cleanable,hotDI.• 34”diameter,fitsthroughstandarddoors.• Capsuledesignforcompletedrainage.• Customsizesavailable.• AllmaterialscomplywithFDAregulations.• “Noprofile”fittings,nomicrobialgrowthniches.

Specifications• Tank,fittings,pedestal-LinearPolyethylene(LPE).• Closure-HighDensityPolyethylene(HDPE).• Gaskets-Viton® fluoroelastomer.• 6”Topopening.• Maximumtemperature190°F.• Overallsize: 125 gal. tank w/pedestal -59”Hx381/2”W 250 gal. tank w/pedestal -96”Hx381/2”W• WHC=WeldedHalfCouplingPE

Note: Tanks do not come vented. All tanks must be vented. See filter section for vent filters and housings. Other fittings are available upon request.

99

St

or

ag

e t

an

kS

& a

cc

eS

So

rie

S

mar cor Purification / www.mcpur.com / 800-268-5035 / 800-268-0032 (Quebec)

Storage tanks aco tm cloSed-toP Storage tankSACOVerticalClosedToptanksarebuilttoASTMspecificationsandmostcommonlyusedforindus-trial storage applications. aCO’s one-piece seamless design produces a rugged tank that is ideal for corrosive chemicals. We install a wide range of fittings and accessories to accommodate your requirements.

features and benefits• Excellentchemicalandcorrosionresistanceandlowtemperatureimpact• Durable one-piece seamless construction• BuilttoASTMspecifications• u.V. stablized for sunlight protection• narrow diameters for space saving in-plant use• Ratedforliquidswithaspecificgravity(density)ofupto1.5(1.9and2.2tanksarealsoavailable)• ManufacturedfromHDPEorXHDPE(cross-linkedpolyethylene)• the HDpe resin complies with FDa and is listed nSF 61 for potable water applications• Fittings are not supplied on tanks unless requested• Various manway lid styles are available to suit your applications.

Note: Dimensions and capacity may vary slightly.

ACOCLOSED-TOPCONEBOT TOMTANKS

Part number caPacitY diameter oVerall manWaYgallonS literS (incHeS) HeigHt (in.) (incHeS)

Ct-70 70 310 24" 48" 15"Ct-100-CH 100 450 30" 42" 12"Ct-100-Ft 100 450 30" 36" 14"

Ct-120 120 540 31" 56" 15"Ct-150-CH 150 680 30" 58" 12"Ct-150-Ft 150 680 30" 53" 14"Ct-225-Dt 225 1000 31" 87" 12"Ct-225-Ft 225 1000 31" 83" 14"Ct-300-Dt 300 1360 48" 51" 14"Ct-300-CH 300 1360 48" 55" 14"

Ct-310 310 1400 55" 41" 14"Ct-400 400 1800 55" 52" 14"

Ct-450-Dt 450 2000 48" 84" 14"Ct-450-CH 450 2000 48" 90" 14"Ct-500-Dt 500 2200 48" 90" 14"Ct-500-CH 500 2200 48" 93" 14"

Ct-510 500 2200 55" 65" 14"Ct-600-Dt 600 2700 48" 100" 14"Ct-600-CH 600 2700 48" 103" 14"Ct-700-Dt 700 3100 48" 118" 14"Ct-700-CH 700 3100 48" 119" 14"

Ct-750 750 3400 70" 60" 14"Ct-800 800 3600 64" 84" 14"

Ct-1000 1000 4500 64" 100" 14"Ct-1010 1010 4500 70" 77" 14"Ct-1235 1235 5600 64" 119" 14"Ct-1250 1250 5600 70" 97" 14"Ct-1655 1655 7500 86" 100" 14"Ct-1700 1700 7500 64" 159" 14"Ct-2000 2000 9000 85" 113" 14"Ct-2455 2455 11000 90" 128" threaded 21"Ct-3305 3305 15000 90" 158" threaded 21"Ct-3500 3500 15500 96" 148" threaded 21"Ct-4300 4300 19500 105" 156" top Hinged 24"Ct-4500 4500 20000 119" 134" top Hinged 24"Ct-4600 4600 20000 96" 192" top Hinged 24"Ct-5300 5300 24000 105" 189" top Hinged 24"Ct-5400 5400 24000 119" 158" top Hinged 24"

Ct-6000 6000 27000 119" 173" top Hinged 24"Ct-6500 6500 29000 143" 137" top Hinged 24"Ct-7000 7000 31500 119" 198" top Hinged 24"Ct-8000 8000 36000 143" 164" top Hinged 24"

Ct-10000 10000 45000 143" 195" top Hinged 24"

100

St

or

ag

e t

an

kS

& a

cc

eS

So

rie

S


Storage tanks aco tm conical bottom tankSWe have a wide range of seamless conical bottom tanks that are ideal for a variety of applications where quick and complete drainage is required. the tanks are available with heavy duty structural steel stands that fully support the conical tank.

features and benefits• Excellentchemicalandcorrosionresistanceandlowtemperatureimpact• Durable one-piece seamless construction• Open top (CBO style), Closed top (CBC style) and Silo (CBS style) available• uV stabilized for sunlight protection• Ratedforliquidswithaspecificgravity(density)ofupto1.5(1.9tanksarealsoavailable)• ManufacturedfromHDPEorXHDPE(cross-linkedpolyethylene)• the HDpe resin complies with FDa and is listed nSF 61 for potable water applications

ACOCONICAL BOT TOMTANKS

Part number caPacitY diameter oVerall SloPe WeigHt manWaYgallonS literS (incHeS) HeigHt (in.) (degreeS) tankS / Stand (incHeS)

CBO-30 30 136 16" 61" 30 13 lbs. / 45 lbs. LIDCBO-45 45 200 22" 60" 24 22 lbs. / 50 lbs. LID

CBO-125 125 560 30" 70" 17 44 lbs. / 80 lbs. LIDCBO-250 150 1100 40" 86" 30 115 lbs. / 110 lbs. LIDCBO-500 500 2200 55" 91" 20 150 lbs. / 180 lbs. LIDCBO-750 750 3400 70" 87" 17 220 lbs. / 551 lbs. LID

CBO-1000 1000 4500 70" 106" 17 260 lbs. / 551 lbs. LIDCBO-1250 1250 5700 70" 127" 17 260 lbs. / 551 lbs. LIDCBC-900 900 4100 69" 119" 45 255 16"

CBC-1300 1300 5800 86" 116" 45 450 lbs. / 440 lbs. 16"CBC-1800 1800 8300 96" 117" 30 700 lbs. / 440 lbs. 24"CBC-2100 2100 9500 86" 154" 45 700 lbs. / 440 lbs. 16" / 21"CBC-2500 2500 11300 90" 158" 30 825 lbs. / 450 lbs. 16" / 21"CBC-3500 3500 15500 98" 180" 30 850 lbs. / 550 lbs. 21"CBC-5000 5000 22000 143" 161" 30 Consult Factory 24"CBC-6500 6500 29500 143" 191" 30 Consult Factory 24"CBS-1000 1000 4500 70" 123" 60 300 lbs. / 575 lbs. 14"CBS-1250 1250 5600 70" 138" 60 350 lbs. / 680 lbs. 15"CBS-1500 1500 6800 70" 157" 60 400 lbs. / 775 lbs. 14"

Storage tanks aco tm SloPed bottom tankSThisinnovativeconceptisexclusivetoACO.Thebottomofthetankisslopedtowardsthefrontforcomplete drainage. this design is intended for applications that require the tank to be emptied completely between batches. they are supplied with a poly base and the set is self supporting.

features and benefits• Excellentchemicalandcorrosionresistanceandlowtemperatureimpact• Durable one-piece seamless construction• Outlet size is 2” flange bolt patern (150#)• u.V. stabilized for sunlight protection• Ratedforliquidswithaspecificgravity(density)ofupto1.5(1.9tanksarealsoavailable)

ACOSLOPPEDBOT TOMTANKS

Part number caPacitY diameter oVerall manWaYgallonS literS (incHeS) HeigHt (in.) (incHeS)

SB 300 300 1360 47" 75" 10"SB 400 400 1810 47" 103" 10"SB 800 800 3630 76" 74" 10"/14"/21"

SB 1000 1000 4500 76" 89" 10"/14"/21"SB 1250 1250 5600 76" 104" 10"/14"/21"

101

St

or

ag

e t

an

kS

& a

cc

eS

So

rie

S


Pressure tanks romate tm VeSSelSThehigh-performance,high-valuevesselsforcommercialapplications.Designedexclusivelyforreverse osmosis permeate water. these pure water storage vessels are ideal for continuous draw requirements.

features and benefits• 100%nonmetallic,seamlessvesselswillneverchip,rust,dent,orleak.• Removableaircellallowsforeasyserviceandsanitization,orreplacementasneeded.• AllmaterialsusedinconstructionareFDA-approved.• Havetheabilitytodischargeinanyposition.• Romate4isratedfor100psigmaximumoperatingpressure;100ºFmaximumoperating

temperature.• Largersystemsareratedfor125psigmaximumoperatingpressure;120ºFmaximumoperat-

ing temperature.• RO4-Polypropyleneshell.• RO15-RO80-Polyethyleneinnershell,fiberglassexterior.

Note: All vertical designed tanks.Maximum operating temperature is 120ºF for models except for the ROMATE 4 (100ºF). Dimensions and weights may vary slightly.

ROMATECOMMERCIAL

Part number caPacitY (gal)

dia x Hgt (in.)

SYStemconnection

WeigHt (lbS.)

max. oPer (PSi)

ROMATE4 3.6 9x20 1/4”MNPT 8 100ROMATE15 14.5 16x27 1”MNPT 15 125ROMATE20 19.8 16x33 1”MNPT 19 125ROMATE30 29.5 16x44 1”MNPT 23 125ROMATE40 40.3 16x57 1”MNPT 30 125ROMATE80 86.7 25x56 11/4”MNPT 58 125

Station Wall boxes Station Wall boxeSEachboxisdesignedtoprovideeffectivecontainmentofkidneydialysismachineconnections.Itservesasaworkstationforeachindividualpatienttreatment area, which conveniently can accept fittings for water, acid concentrate and bicarbonate for efficient central distribution. this keeps the dialysisworkareafreefromleakageandcorrosion.MarCorPurificationoffersavarietyofwallboxesthataremadeofpolyethyleneorlight-weightABSplastic.Theseboxesaremadewithcorrosion-freematerials,aredurable,areeasy-to-cleanandareattractiveinanydialysissetting.Eachboxincludesbuilt-indrainfittingconnectionforeasyinstallationtothemainwasteline.Duetothevarietyofavailableconfigurations,pleasecontactMarCortoobtainaquoteforacompletestationwallboxforyourproject.

STATIONWALLBOXACCESSORIES Part number deScriPtion 343-21-158 Wallstationboxhardwaremountingkit (includes (4) SS screws, (4) inserts w/white caps) 3024550 Label,Card,WallBox 3024587 Label,Card,WallBox,Concentrate

STATIONWALLBOXES

Part outSide number deScriPtion dimenSionS (in.)

210-35-301 CustomPEstationwallbox,2”drain,white 17x17x5

210-35-305 ABSplasticstationwallbox,1-1/2”drain,white 12-3/4x12-3/4x4-1/8

DW-D5-WB-01 CustomPEstationwallbox,1-1/2”drain,beige 17-1/2x17x6

Note: Ports and other fittings are not included in the price. DiMENSiONS ARE APPROxiMATE.

Pe Wall box

102

St

or

ag

e t

an

kS

& a

cc

eS

So

rie

S


mar cor PurificationMarCorPurificationoffersabicarbsystemdesignedforqualityandeaseofuse.OurbicarbmixinganddistributionsystemsincludeFDa certifications. they are cost effective, clean and efficient, and are the best designs in the industry.

Single mix SYStemArealspace-saver,thissingletankbicarbmixingsystemisdesignedforeasy,completebicarbmixingandjugfilling.TheMCB200systemhasbeenreplacedbytheMCB202system.

features and benefits• Simpleinstallation-shippedready-to-use.• Compactdesignsavesspace.• Jugsarequicklyfilledfromthefront-mounted3/4”faucet.• Thoroughbicarbonatemixingisattainedwithapowerful3/4or1/2HPpumpsystem.• 50-or100-gallontanksareavailable.• Othersystemsareavailable.Callfordetails.

central mixing deliVerY SYStemTheredesignedsemi-automaticbicarbmixinganddistributionsystemiseasiertouse, more efficient and has added features.

features and benefits• Systemcontrollerisergonomicallydesigned.• Lowprofile50-or100-gallontanksallowforeasierpowderloading.• 3/4or1/2HPpumpformixingandtransferringand1/8HPfordistribution

to all pOu.• Improvedfillingaccuracy.• Audiblealarmswithremotecapability.• Operatorinterface/batchcontroller.• Purewaterflushfeatureofmixtankanddistributionloopreducesoverall

sanitizing time.

bicarb mix Systems

SPECIFICATIONS model mcb 202 50 gallon 100 gallon Height 3’7” 5’1” Width 3’6” 3’6” Depth 3’0” 3’0” Weight: Empty 90lbs. 125lbs. Full 600 lbs. 1,020 lbs. electrical 110 volt, 20 amp circuit 110 volt, 20 amp circuit Feedwater Connections 3/4” schedule 80 pVC Fpt 3/4” schedule 80 pVC Fpt

SINGLEMIXSySTEM Part Product number deScriPtion

200-02-248 MCB202-50Bicarbsinglemixsystem,50gallon 200-02-249 MCB202-100Bicarbsinglemixsystem,100gallon

mcb 202 - 100

SPECIFICATIONS model mcb 205/212 50 gallon 100 gallon Height 4’9” 5’1” Width 7’1” 7’1” Depth 2’8” 2’8” Weight: Empty 300lbs. 350lbs. Full 1,300 lbs. 2,050 lbs. electrical 110 volt, 20 amp circuit 110 volt, 20 amp circuit Feedwater Connections 3/4” schedule 80 pVC Fpt 3/4” schedule 80 pVC Fpt

mcb 212 - 100

MIXANDDELIVERySySTEM Part Product number deScriPtion

200-02-212 MCB212-50Bicarbsemi-automixsystem,50gallon 200-02-213 MCB212-100Bicarbsemi-automixsystem,100gallon 200-02-207 MCB205-50Bicarbmanualfillmixsystem,50gallon 200-02-208 MCB205-100Bicarbmanualfillmixsystem,100gallon

103

St

or

ag

e t

an

kS

& a

cc

eS

So

rie

S


BICARBSySTEMMCB205/212PARTS&ACCESSORIES

Part Product number deScriPtion filters 275-20-016 1micron97/8filter,Purtrex (Soldascase:qty40)

274-02-005 1/2” nylon Strainer Pumps

028-05-002 te 5 Distribution pump/motor (MCB212models)

028-06-002 TE6Mixpump/motor(MCB205/212-50)

028-07-001 TE7Mixpump/motor(MCB205/212-100)

028-83-172 Wet end kit, Distrubution pump (MCB205models)

028-83-174 Wetendkit,Mixpump(MCB205/212-50)

028-83-176 Wetendkit,Mixpump(MCB205/212-100) Valves 425-01-162 3/4” true union ball valve, pVC

425-01-163 1” true union ball valve, pVC

425-04-102 1/2” Compact ball valve, pVC

425-18-102 3/4” Diaphragm Valve, pVC

425-06-103 Labcock test port valve, pVC

425-05-162 3/4” 3-way true union valve, pVC

425-05-961 Valveholder

425-05-966 Valveextension

425-27-239 3GPMflowcontrolnipple,PVC

425-29-901 3/4”InletSolenoidValve,24V electrical 313-07-001 Flow paddlewheel

250-13-539 Mixpumpfuse(LPCC-15)

250-13-534 Distribution pump fuse (LpCC-7 1/2)

313-05-002 2GPMflowsensor(mix)

313-08-162 0.1GPMflowsensor(distribution)

314-01-003 tank mount level switch miscellaneous 1228208 3/4” Hose, High purity, grey (per ft.)

300-04-101 0-30 SS pressure gauge

347-41-105 QDCIn-LineHoseBarbBody,1/2”,w/shutoff

347-43-005 QDCMalePipeThreadInsert,1/2”,w/shutoff

355-02-008 1/2” Hose, clear braided (per ft.)

bicarb mix Systems Parts & accessories

BICARBSINGLEMIXSySTEMMCB200/202PARTS

Part Product number deScriPtion

028-06-002 TE6Mixpump(MCB200/202-50)

028-07-001 TE7Mixpump(MCB200/202-100)

425-04-103 3/4” Compact Ball Valve, pVC

425-04-104 1” Compact Ball Valve, pVC

425-01-162 3/4” t/u Ball Valve, pVC

350-11-004 3/4”MNPTx3/4”MGHTDixon

350-15-012 3/4”MNPTx1/2”HB90Dixon

250-03-102 On/Off switch with enclosure

mcb 200 - 100

104

St

or

ag

e t

an

kS

& a

cc

eS

So

rie

S


mar cor PurificationMarCorPurificationoffersSolutionDeliverySystem(SDS)tomixbicarbonateanddeliverboth acid concentrate and bicarbonate to various points-of-use within a hemodialysis clinic. these systems have FDa certification, list numerous features and benefits, and in-clude a variety of configurations all suited to meet your specific requirements. Gravity fed systems both local (installed on the main controller) and remote (installed in the ceiling) or pressurized Systems (pSDS) are available. Contact us today to configure a system that is right for you.

features and benefits• DirectDelivery–ofallconcentratestovariouspoint-of-uses.Itisconveniently

drawnfromthedrumsand/ormixingtank.• EasyInstallation–intoneworexistingfacilities.• Quiet,StainlessSteelMixingPump–agitatesthesolution.Theinternalstatic

mixerhasnorotatingpartstojamorbreak.• AutomaticLevelControl–switchwithaudibleandvisualalarmalertstheuser

oflowdistributionconcerns.Adjustablelevelcontrollercanbesettomixavariety of concentrates.

• UltravioletIrradiator-245NMUVlampinbicarbfluidpathtodiscouragebacterial growth.

• SamplingValve–allowsforeaseofroutinequalityassurancetesting.• ConeBottomTanks–aremadeofhighpuritypolyethylene.Thesystemis

made of durable, corrosion resistant materials that will withstand harsh solutions.• ColourCodedConnectors–andhosesmakedifferentiationofsolutionseasy.• DisinfectionandRinsecapabilities–thatiscompatiblewithallindustrydisin-

fectants. Disinfectant spray bars insure thorough rinsing and disinfecting of mixandheadtanks.

Solution delivery Systems

SOLUTIONDELIVERySySTEM Part Product number deScriPtion remote SdS systems 3024747 SDS,bicarb-only,remote,100Gmixtank 3024748 SDS,1acid/bicarb,remote,100Gmixtank 3024749 SDS,2acid/bicarb,remote,100Gmixtank 3024750 SDS,3acid/bicardb,remote,100Gmixtank 3024773 SDS,bicarb-only,remote,70Gmixtank 3024774 SDS,1acid/bicarb,remote,70Gmixtank 3024775 SDS,2acid/bicarb,remote,70Gmixtank 3024776 SDS,3acid/bicardb,remote,70Gmixtank local SdS systems ME12650-0 SDS,bicarb-only,local,10-Gallon ME12650-1 SDS,1acid/bicarb,local,10-Gallon ME12650-2 SDS,2acid/bicarb,local,10-Gallon ME12650-3 SDS,3acid/bicarb,local,10-Gallon ME12653 SDS,bicarb-only,local,15-Gallon ME12653-1 SDS,1acid/bicarb,local,15-Gallon ME12653-2 SDS,2acid/bicarb,local,15-Gallon ME12653-3 SDS,3acid/bicarb,local,15-Gallon bicarb mix tanks 3024746 Bicarbmixtank,,70-Gallon 3024745 Bicarbmixtank,100-Gallon Head tanks & mounting kits ME12689 Headtankassembly,bicarb,10-Gallon ME13366 Headtankassembly,bicarb,15-Gallon ME14621 Headtankassembly,bicarb,30-Gallon ME13360 Headtankassembly,acid,10-Gallon ME13379 Headtankceilingmountkit,10/15/30-Gallon ME14629 Headtankwallmountrack*,10/15/30-Gallon *Holdstwoheadtanks

SOLUTIONDELIVERySySTEMcont inued Part Product number deScriPtion acid only system ME14449 SDS,2acid-only(controller&2transferpumps) Pressurized systems (PSdS) 3024751 pSDS, Bicarb only 3024752 pSDS, 1 acid 3024753 pSDS, 2 acid 3024754 pSDS, 3 acid accessories ME14502 SDSremotestatusmonitor ME14651 Ozonesanitizingsystem ME42020 Ozonetestkit 1231492 SDSambientozonemonitor 1243132 PSDS,Monitor,Bicarbonly,FlushMount 1243131 PSDS,Monitor,Bicarbonly,SurfaceMount 1243135 PSDS,Monitor,w/Acid,FlushMount 1243134 PSDS,Monitor,w/Acid,SurfaceMount ME42018 Coilytube,PVC,clear ME12670 Diptube(55-gallon-drum)-w/wireharness ME42016 Ballvalve,3/8”SF,blue ME42017 Ballvalve,3/8”SF,red

105

St

or

ag

e t

an

kS

& a

cc

eS

So

rie

S


SDS Spare partS Part Product number deScriPtion electrical

ME30274 CircuitBreaker,20amp ME21165 Fuse,1.5amp,SLOBLO ME21077 Fuse,1amp,SLOBLO ME20283 Indicator,24V,Red,IDEC ME20284 Indicator,24VGreen,IDEC ME21054 LAMP,Green,24V ME21053 LAMP,Red,24V ME14927 PLC,VersaMax,MainModule ME21191 PLC,VersaMax,ExpansionModule ME21051 Relay,24VAC,30amp(C-1) ME20115 Relay,24VAC,20amp(MCR-1) ME20089 Relay,24VAC,5ampP(CR1throughCR6) ME20280 Sonalert,24Vac ME30118 Switch,Float,MixTank,1-1/4NPT ME20161 Switch,Float,HeadTank,1/2NPT ME41062 Switch,Float,DipTube ME41063 Switch,Flow,1”,2GPM ME20286 Switch,IDEC,SPST,Power ME20287 Switch,IDEC,P-Button,Momentary ME20288 Switch,IDEC,3Position(Mix/OFF/Transfer) ME21048 Switch,IDEC,3Position(AutoFill/Manual) ME21044 Timer,Digital ME41164 Valve,Solenoid,Plastic,(WaterInlet) ME13077 Wire,DipTube,45’ ME13076 Wire,HeadTank,Remote ME14639 DipTubeW/OWire,37” filter/housing replacement parts ME40822 FilterHousing,10” ME40920 Filter,0.20mic,10”Water ME41383 Filter,5mic,2x6-3/8”Vent ME41762 Filter,GAC,2x10-1/4”Vent(ForOzoneUse) fittings – general ME40455 QD,Female,1/4”MNPT(Tank/Operate) ME40104 QD,Female,3/4”barb,Cam-loc ME40864 QD,Female,1”barb,Cam-loc ME42092 QD,Male,3/8”tube(BicarbWand) ME40103 QD,Male,3/4”MNPT,Cam-loc ME40863 QD,Male,1”MNPT,Cam-loc fittings – speed fit ME41205 Adap.1/2”tubeendx1/2”MNPT ME41259 Adap.1/2”tubeendx3/8”MNPT ME40567 Adap.3/8”tubeendx1/4”MNPT ME40672 BarbAdapter,3/8”tubeendx3/8”hose ME40569 Elbow,3/8”SFx1/4”MNPT ME41092 Elbow,1/2”SFx1/2”MNPT ME40568 Elbow,3/8”SFx3/8”MNPT ME41086 Elbow,1/2”SFx1/2”tubeendadap. ME40564 Elbow,3/8”SFx3/8”tubeendadap. ME40571 Lockclip,red,3/8” ME40572 Lockclip,red,1/4” ME41089 Straight,1/2”SFx1/2”MNPT ME40671 Straight,3/8”SFx1/4”MNPT ME41087 Straight,1/2”SFx3/8”MNPT ME41232 Straight,3/8”SFx1/2”MNPT ME41094 Tee1/2”x1/2”x1/2”SF ME40673 Tee3/8”x3/8”x3/8”SF ME41141 Tee1/2”x1/2”x3/8”SF ME41233 Union,1/2”SF ME41160 Union,1/2”SFx3/8”SF ME41258 Union,elbow,1/2”SF ME41265 Union,bulkhead,1/2”SF ME40561 Union,bulkhead,3/8”SF

SDS Spare partS cont inued Part Product number deScriPtion Pump replacement components ME42137 Pump,3/4HP,MixPump,EBARA 1229406 O-ring,PumpCase,EBARA 1229405 O-ring,VenturiTube,EBARA 1229404 O-ring,VentPlug,EBARA 1229407 Pump,3/4HP,MechanicalSeal(EBARA) ME41155 Pump,3/4HP,MechanicalSeal(JetBooster) ME41154 Pump,3/4HP,O-ring/GasketSet(JetBooster) ME14876 Pump,1.4GPM,ReplacementPump/MotorAssembly ME41575 Pump,1.4GPM,PumpHeadOnly ME41576 Pump,1.4GPM,DiaphragmandSeals(RebuildKit) replacement tube and hose 1228208 Hose,3/4”,150PSIgray ME60049 Tube,PE,3/8”Blue–500ft/roll ME60050 Tube,PE,3/8”yellow–500ft/roll ME60133 Tube,PE,3/8”Red–500ft/roll ME60135 Tube,PE,3/8”Orange–500ft/roll ME60450 Tube,PE,1/2”Red–250ft/roll ME60451 Tube,PE,1/2”Blue–250ft/roll ME60452 Tube,PE,1/2”yellow–250ft/roll ME60453 Tube,PE,1/2”Orange–250ft/roll replacement valves ME42015 Valve,ball,3/8”SFx3/8”SFGray ME40352 Valve,ball,Union,3/4” ME40173 Valve,ball,Union,1” ME40432 Valve,ball,Union,11/2” ME42053 CheckValve,1/4”FNPT,White ME41985 CheckValve,3/4”FNPT,2# ME41184 Flowmeter,W/needle,5GPM Switches 1267743 Indicator,24V,Amber,GE 1234585 Indicator,24V,Green,GE 1234584 Indicator,24V,Red,GE 1237010 Lamp, Green, 24V, Ge 1237011 Lamp, red, 24V, Ge 1234582 Switch,2POS,Maintain,2NO,2NC,GE(on/offswitch) 1234583 Switch,2POS,Maintain,1NO,1NC,GE 1234579 Switch,3POS,Maintain,2NO,2NC,GE(mix/off/transfer) 1234581 Switch,3POS,MOM,1NO,1NO,GE(autofill/manual) 1234580 Switch,P-Button,MOM,1NO,GE(pushbutton) tank replacement parts (mix tank and head tanks) ME40821 Sprayhead,PVC,3/8”(MixTank) ME41054 Sprayhead,PVC,1/4”(HeadTank) ME41047 TankSuction,Screen ME41046 TankSuction,RingScreen ME40291 Valve,ball,1/4”xBarb(MixTankSampleValve) 1230008 TankLid,MixTank 1236603 O-ring, 16” Diameter 1236571 Gasket, 2.25” Diameter, Solid ME41048 Eductor,Mixing,for100GallonTank ME41260 Eductor,Mixing,for70GallonTank ME14886 O-ring,LidSeal,3/8”x16”,PVC ME41237 FlowControl,MixPump,10Gal ME50112 Tape,Foam,TankLid(priceperfoot) ME60690 SiliconeSealant,3oz uV replacement components ME41584 UV,2GPM,SS(CompleteUnit) ME41585 UV,LAMP,2Pin ME41886 UV,Quartzsleeve,DoubleOpenEnd

Solution delivery Systems mar cor Purification

106

St

or

ag

e t

an

kS

& a

cc

eS

So

rie

S


SeminarS & WorkSHoPSMarCorPurificationoffersyoutoattendtheircomprehensivewatertreatmentsys-tem training program for hemodialysis. Our seminars will be held at our plymouth, MNfacility.Fourdayseminarincludeslunchandrefreshments.Seatingislimitedsocontact us to sign-up.

four day Seminar and Workshop• ClinicalSymptomsofInadequatelyTreatedWater• WaterSystemComponents• AAMIStandards&FDAGuidanceforWaterTreatmentMonitoring• BacterialTreatmentConcerns• ROTheory&Fundamentals:Cleaning&DisinfectingIssues• Hands-onTraininginServicingaWaterTreatmentSystem

central ro Systems• ZyzaTechV&Z• Osmonics23G• Biolab4400M

concentrate delivery Systems• MCBBicarbMixing&DeliveryUnits• SDSConcentrateDeliverySystem

training Services

Portable ro Systems• 700Series• Millenium• SemperPure

on-line Water trainingthe need for hemodialysis water training, inspection, and information has placed greater demands on you and your staff, while at the same time, regulatory organiza-tions continue to refine standards of water product performance. Limited time, skills, and resources can get in the way of a high-quality, water treatment program.

our SolutionMarCorisanameyouhavecometotrustinhemodialysis.TheperfectcombinationforyourdialysisclinicnowofferstheWaterSolutionPackage–thetoolyouneedfortotalwater convenience at your clinic.the Water Solution package consists of training for your staff on hemodialysis water topics and offers hemodialysis support information you can use. We enroll you and your staff into the Dialysis Water university program for complete on-line water train-ing while providing you access to reference materials and other water information based sites.

Hemodialysis Water training• TrainingLevels1,2and3• Coursestructurebytopicandskilllevel• Appropriateforallstaffmembers• ApprovedcontacthoursthroughNANT*• Self-administeringandinteractive• Offeredona24-7basis

Hemodialysis System access• Current water regulations and guidelines• Hemodialysis-orientedinformation• Ongoing“NewsyouCanUse”• Consolidatedweblinkslibrary

WATERSOLUTIONSON-LINETRAINING Part Product number deScriPtion

800-10-161 1 person, without Contact Hours 800-10-162 1 person, with Contact Hours 800-10-165 5 people, without Contact Hours 800-10-166 5 people, with Contact Hours

Becauseofourexperienceinhemodialysis,weunderstandyourneedsbetterthananyoneelseintheindustry.MarCorPurificationmakesthePerfectCombinationforyourdialysisclinic.Ourpartner,MinntechRenalSystems,alsosponsorsthisprogram.Visitwww.dialysiswatersolution.com to learn moreaboutthisexcitingprogram.

* Mar Cor/Minntech will provide contact hours through the National Association of Nephrology Technicians/Technologists (NANT) for this program. These contact hours are provided through the California Board of Nursing and may be used for certification requirements by the Nephrology Nursing Certification Commission (NNCC) and recertification requirements by the Board of Nephrology Examiners, Nursing and Technology (BONENT), NNCC and the National Nephrology Certification Organization (NNCO) for both dialysis technicians and nurses.

SEMINAR&WORKSHOPS Part Product number deScriPtion

ME70003 4DayTrainingSeminar

Product IndexProduct Index

107

Pr

od

uc

t in

de

x

108

Pr

od

uc

t in

de

x

800-268-5035 / 800-268-0032 (Quebec) / www.mcpur.com / Mar cor Purification

Product index cleaners and disinfectants

Cleaners ......................................................................... 87

Cleanroom Sterilants ................................................ 85

Dry Fog System ........................................................... 86

Surface & System Disinfectants ...................... 84, 85

Test Kits & Supplies .................................................... 88

Process controls

Conductivity Instrumentation ........................ 91, 92

Process Meters............................................... 93, 94, 95

Pressure Gauges ......................................................... 90

Pressure Reducing Valves........................................ 96

Pressure Relief Valves................................................ 96

Resistivity Instrumentation ..................................... 92

Totalizing Meters ........................................................ 90

Vacuum Breakers ........................................................ 93

Storage tanks and accessories

Bicarb Mix Systems ........................................ 102, 103

Bulk Storage ................................................................. 98

Closed Top .................................................................... 99

Conical Bottom .........................................................100

Pressure........................................................................101

Solution Delivery Systems ........................... 104, 105

Sloped Bottom ..........................................................100

Wall Boxes ...................................................................101

Training Services .......................................................106

filters and MembranesCarbon Filters ............................................................... 12

Depth Filters ............................................................. 7-11

Filter Housings.......................................................28-32

Filter Housing Accessories ...................................... 30

Hollow Fiber Filters ..............................................24-27

Membranes............................................................. 33,34

Pleated Filters ........................................................13-23

Process Pipe and fittingsPipe .................................................................................. 30

Pipe Fittings............................................................30-36

ValvesBall ................................................................................... 42

Butterfly ......................................................................... 43

Check .............................................................................. 44

Diaphragm .................................................................... 42

Flow Control ........................................................... 45,46

Labcock .......................................................................... 48

Pressure Relief ............................................................. 47

Reed Switch .................................................................. 48

PumpsBooster ........................................................................... 51

Centrifugal .............................................................. 50,51

Rotary Vane .................................................................. 52

conditioning equipmentCarbon ............................................................................ 57

Filtering Material ........................................................ 58

Multimedia.................................................................... 54

Sediment ...................................................................... 55

Service Deionization .......................................... 63, 64

Water Softening .......................................................... 56

Ultraviolet................................................................59-62

Water Purification equipmentPortable RO Systems ............................ 73, 74, 76, 77

Central RO Systems................................66-70, 78, 79

Hot Water Disinfection RO Systems ............ 72, 80

RO / Electrodeionization Systems ........................ 71

Lab Water Systems .............................................. 75, 81

E-Cell Replacement Modules ................................. 82

the following trademarks in this catalogue are used by the firms shown in italic:

Aco Container: Aco™

Alphachem Limited: Alphachem™

Aquafine Corporation: Aquafine®, Colorguard™

Aries Water: Gemini™

Asahi/America: Duo-Bloc®, Omni®, Multiport®, Labcock®

Associates of Cape Cod: Pyrosate™

Automatic Switch Co.: ASCO®, Red Hat II®

Avista Technologies: ROClean™, VITEC™

BadgerMeter: Recordall®

Banjo Corporation: Banjo®

Chemline: Chemline®, Enpure®

Desal: Pure Water™

Dupont: Viton®, Teflon®, Delrin®, Neoprene®

Egli, Fischer: clic®, Strutcatcher®

Elf Autochem: Kynar®

Enfield: ENPURE™

Esmer Industries: Grilamid®

FilmTec Corp.: FILMTEC®

Fleck Industries: Fleck®

Fluid-O-Tech: Fluid-O-Tech®

General Electric: Noryl®

GE Water Technologies: Aquatrex®, Hytrex®, Purtex™, OSMO®, TONKAFLO®, DESAL™, Osmonics® ,E-Cell®

Georg Fischer: GF®

Grundfos Corporation: Grundfos®

Hach Corporation: FerroVer®, CalVer®, AccuVac®

Hubbell: Insulgrip®, Twist-Lock®, VARI-SIZE®

King Lee Technologies: Diamite®

KX Industries: Matrikx®

MetPro Corporation: Keystone Blue Giant™

Minntech: Minnclean®, Fibercor®, FiberFlo™

Minncare®, Actril®, Minncare Dry Fog™

Myron L Company: Ultrameter II™, uDock™,

Techpro II™

Nitto Denko: Hydranautics®

Pall Corp.: SuporLife™

Pentek: 3G®, Big Blue®

Phillips: Ryton®

Plast-O-Matic Corporation: Plast-O-Matic®

Plymouth Products: Big Blue®, Slim Line™

Power Process Controls: Hydroguard®

Hi Sense Ultra 1.0™

Severn Trent: Ultra Dynamics®

Structural Fibers: WellMate™, ROMate™

Terracon Corp.: Terrapure®

Trisep Corp.: TriSep®

Trojan Technologies: Trojan®

Versa Products: Versa®

Veolia Water Solutions & Technologies: ELGA®

Watts: Watts®

W.L. Gore & Assoc.: Gore®

Customer responsible for in-bound freight charges.

Customer responsible for hazardous in-bound freight charges.

Key to Symbols:

Filtration Technologies: Mar Cor Purification’s unique Fiberflo® polysul-

fone hollow fiber technology is the core component of a wide range of filter ap-

plications. Manufactured with a patented process using hydrophilic polymers

combined with a naturally hydrophobic polysulfone polymer, the sponge-like

structure of the fiber walls and inherent biocompatibility make it ideal for either

medical therapies or process filtration.

Water Technologies: Mar Cor Purification is a leader in high purity water equipment

and systems and has been since 1969. As an equipment integrator, we combine the very lat-

est in water purification technology to provide complete water treatment systems designed

to meet today’s tough industry requirements. We offer components such as softeners, back-

washable filters, storage and distribution systems, ultrafilters, and service deionization. We

also manufacture a complete line of reverse osmosis machines including the 23G and

Millenium for medical applications all assembled at our ISO certified facilities.

Disinfection Technologies: We offer the best in biological contamination

control and system cleaning and disinfecting capabilities. Using Minncare Cold

Sterilant is the most efficient way to reduce or eliminate biofilm contamination

of your water treatment and distribution system. It is proven to be the fastest dis-

infectant available. Minnclean AC and TF are effective and safe cleaning products

that help to restore production and increase longevity to Reverse Osmosis membranes. Actril Surface Disin-

fectant is a powerful solution proven to kill even the hardiest class of organisms, such as MRSA and C.Difficile.

Lastly, Mar Cor Purification’s unique Dry Fog technology uses Minncare Cold Sterilant to effectively disinfect

small confined spaces to large clean rooms.

Contact us today to learn more about our complete line of products and services. (800) 628-0032

Filtration, Water, and Disinfection Technolgies

Mar Cor Purification is dedicated

to providing innovative solutions

through filtration, water, and

disinfection technologies.

As a wholly owned subsid-

iary of Cantel Medical Corp.

(NYSE:CMN), Mar Cor Purification

is uniquely positioned to offer

the medical, life science and in-

dustrial marketplace hollow fiber

membrane filtration, complete

water purification equipment

and services, and proven sterilant

products. We deliver value to our

customers by improving product

quality, reducing operating costs,

protecting capital investments,

and safeguarding people’s lives.

For more information on

Mar Cor Purification, visit www.

mcpur.com.

Mar Cor PurificationFiltration, Water, and Disinfection Technologies

REvERSE OSMOSiS EquiPMENt

FiltERS ANd MEMbRANES

PROCESS PiPE ANd FittiNgS

vAlvES

PuMPS

CONditiONiNg EquiPMENt

ClEANERS ANd diSiNFECtANtS

PROCESS CONtROlS

StORAgE tANkS ANd ACCESSORiES

(800) 268-5035

Mar Cor Purification, inc., 3250 Harvester Road - unit 6, burlington, ON l7N 3W9, Canada, www.mcpur.com P/N:PROCAt-CA RevA

Mar Cor Purification3250 Harvester Road - Unit 6Burlington, ON L7N 3W9CanadaTel: (905) 639-7025Toll Free: (800) 268-5035Fax: (905) 639-0425

Mar Cor Purification14550 28th Avenue NorthPlymouth, MN 55447U.S.A.Tel: (484) 991-0220 Toll Free: (800) 633-3080Fax: (763) 210-3868

Mar Cor Purification4450 Township Line RoadSkippack, PA 19474-1429U.S.A.Tel: (484) 991-0220Toll Free: (800) 346-0365Fax: (484) 991-0230

Mar Cor Purification 85 Avenue LindsayDorval, Quebec H9P 2S6CanadaTel: (514) 636-0032Toll Free: (800) 268-0032Fax: (514) 636-8429

man cor purification canadian product catalogue · published 7/2010 our history mar cor...

Documents