Making baby shoes with different patterns

The feature of this homemade baby shoes is the elastic shoe throat. And it is easy to put on and off.

Now I will show you the ways of making baby shoes.

Materials you need

Cotton fabric

Cotton lining

Sewing threads

Needle

Scissors

Elastic cords

How to make baby shoes?

Here is tutorial on homemade baby shoes again. We have given several lessons on making baby

shoes. Are you satisfied with them? A new type you will learn this time.

Step 1: make the sole of the shoes

Cut four pieces of surface fabric of sole and

corresponding cotton linings. Cut two pieces

of surface fabric of vamp, corresponding

cotton linings and two small long pieces.

Place two pieces of sole fabric with two cotton

linings in the middle; fix them with running

stitch from inner circle to outer. Do the same

to make the other sole.

Step 2: make the vamp of the

shoes

Fold the two ends of the small fabric and

sew, then fold it in half and sew the two

sides; turn it over. Suture the vamp fabric

and the made small piece. Lay vamp cotton

lining into the one side of the vamp fabric

and fold. Depart the small pieces, and suture

the vamp fabric and its cotton lining. Make

the small piece fixed with the vamp fabric by

whip stitch. Make the other vamp in the

same way.

Supposing that your kid is very naughty and likes kicking shoes off, I think this style of homemade

baby shoes is suitable for him. If you are in the same boat with me, do not hesitate to follow the

ways of making baby shoes.

Need elastic cords, please click: http://www.lovehobbycraft.com/b-515-elastic-cords.html

Step 3: make the uppers of the

shoes

Cut two pieces of uppers fabric as the shape

shown below and corresponding cotton lining.

Lay cotton lining inside one side of the uppers

fabric. Fold it and sew whip stitches along the

two sides. Sew the up and down sides with

apparent lines as well; leaving 1.2-1.25cm out

at the upper side. Sew a whip stitch to combine

the vamp and sole.

Step 4: the ending work

Stitch the uppers of the shoes with vamp

and sole. Thread an elastic cord through

the upper side of the uppers to link with

the small piece on the vamp. Use a safety

pin to adjust the length of the elastic

cord; cut the redundant and sew. Make

the other shoe as the same. Turn over the

shoes to the front.