make it! take it! ipad stand
DESCRIPTION
Make It! Take It! iPad Stand. Supplies :. 1. cardboard or plastic corrugated yard signs (a 18 x 24 sign would make two stands) 2. glue gun 3. Velcro (3/4” wide) (2) 6” soft side, (2) 6” rough side, (2) 4” rough side 4. Non-slip shelf liner (8 x 11” piece & 8 x 4” piece) - PowerPoint PPT PresentationTRANSCRIPT
Make It! Take It! iPad Stand
Supplies:
1. cardboard or plastic corrugated yard signs (a 18 x 24 sign would make two stands)2. glue gun3. Velcro (3/4” wide) (2) 6” soft side, (2) 6” rough side, (2) 4” rough side4. Non-slip shelf liner (8 x 11” piece & 8 x 4” piece)5. Box cutter6. Wall corner guard (9” piece)7. Tape measure8. Double sided mounting tape – about ¾-1” wide, need 6”.9. Decorative Duct Tape (optional)10. Clipboard
To Create a Stand
1. Cut two 12 x 9” rectangles out of the cardboard or yard sign. •MAKE SURE TO CUT AGAINST THE GRAIN
ON AT LEAST ONE PIECE
When cutting against the grain, do not cut in the same direction as the lines. See picture on right.
2. Use a pencil to label a side A and side B of one rectangle.
AB
3. Score on side A at 1 ½ inches from the bottom.
4. Flip over to side B.
B
Why would a student need to use and
iPad stand?
5. Score in the middle at 6 inches on side B.
6. Still on side B, go to opposite end of the score of side A. Score at 2 inches.
7. Flip to side A. Fold the scored line down.
8. Flip to side B. Fold the middle and last scored line
down.
Note: If you are going to decorate your stand with colored Duct tape, you will need to add it prior to the next step.
10. Take a 6 inch strip of soft side Velcro.
11. Attach the Velcro strip to side B at end with 1” score.
12. Take smaller piece of shelf liner and glue to side B at end
with 2” score.
What are two
examples of vision
aids?
To Create a Base:
1. Take the second piece and label one side C and
one side D.
C D
2. Note: If you are going to decorate the base with Duct tape, you will need to do so prior to the next
step.
3. Flip to side C and add 6 inch piece of double sided
tape to one end. Do not peel of back of tape yet.
4. Take two strips of 4 inch rough side Velcro.
Name the organization
that certifies
people as Assistive
Technology Specialists
5. From the tape, measure in approx.
1 ½ inches. This will be the top of the Velcro strips. The two strips will be about two inches apart
parallel to each other.
7. Flip to side D.
D
8. Take 6” piece of rough sideVelcro and place about 1” from
the end.
What is voice
recognition?
Who might use it?
Attaching the stand with the base:
1. On base, peel the paper off tape.
2. With side B up, align 1”score to the edge of the
base. Press together.
3. Take 6” piece of soft side Velcro and apply to top of 1”
score.
4. Take 6” piece of rough sideVelcro and apply to back
of corner guard.
5. Apply corner guard to 1” score area.
6. Bend the 2” score andattach to Velcro
at desired height.
*To use as iPad stand, place large shelf lineron bottom of base.*
*To use as clipboard, Flip stand over with base
Side up. Apply a Clipboard with soft side
Velcro.*