maintenance and lubrication edt c i r endt f dsrer ee
TRANSCRIPT
An ASSA ABLOY Group brand
• Improved weather sealing and draught proofing performance
• Built-in quick release lever
• Secured by Design approved
Defender RestrictedA friction hinge designed specifically for resident safety
Due to a continuous programme of development the company reserves the right to make alterations without notice. (Products which are not a stocked item will be subject to a longer lead time which needs to be agreed with your Yale representative).
© Yale, September 2018
THE YALE BRAND, with its unparalleled global reach and range of products, reassures more people in more countries than any other consumer locking solution.
THE ASSA ABLOY GROUP is the world’s leading manufacturer and supplier of locking solutions, dedicated to satisfying end-user needs for security, safety and convenience.
Yale DWSSchool Street, Willenhall, West Midlands WV13 3PW, UK T: 01902 366800 F: 01902 369041www.yaledws.co.uk
Secured by Design Police preferred specification accredited security product of the official UK. Police flagship initiative, supporting the principles of ‘designing out crime’
BBA All products have been tested and approved by BBA
Lifetime Security Guarantee*The Defender Restricted hinge is included in our Lifetime Security Guarantee scheme, providing your customers with numerous benefits and peace of mind
Made in BritainYale Doors and Windows are members of Made in Britain, which champions British manufacturing by encouraging and developing the supply chain of UK-made goods
10 Year Mechanical Guarantee Delivering peace of mind from the world’s favourite lock company
As with most mechanical devices, hinges require periodic maintenance and lubrication. The hinge in general and particularly the pivots, sliding shoe and track must be kept free from dirt, debris and any obstructions at all times.
At Time of Installation - Lubricate all pivot points with light machine oil and wipe away excess, one drop per pivot is sufficient. We suggest one of the following lubricants or equivalent:
a. General light engineering oil with corrosion inhibitors such as Castrol Everyman or 3 in 1 oil (available in aerosol can for convenience).
Note: Solvent based aerosol sprays e.g. WD40 are not suitable for this application.
Every Five Years - Carry out the following checks every five years:
a. Clean any dirt or debris from the hinge and clear any obstructions from the pivots, sliding shoe and track.
b. Apply lubrication as detailed above.
c. Check the tightness and security of all fixing screws and rivets.
Maintenance and Lubrication
An ASSA ABLOY Group brand
Features• Improved weather sealing and draught proofing
performance from extended enclosed end cap and asymmetrical vent arm form when tested to BS 6375-1
• Unique robust cam friction device eliminates any risk of friction screw misuse
• Built-in quick release lever allows the window to be fully opened for easy cleaning and total ventilation
• Asymmetric location system for reliable and accurate closure
• Restrictor automatically relocates and resets when the window is closed
• Slot-hole-slot vent fixing configuration for ease of adjustment and guaranteed fixing into reinforcement on PVC-u window frames
• Available as highline variants for profiles with cavities between 16mm and 18mm
• Available in ferritic 430* as standard or austenitic 304* stainless steel for enhanced corrosion resistance
Specification• 10 or 12 year mechanical guarantee**
• Endurance tested to 30,000 cycles
• Corrosion tested to a minimum of 96 hours
• Secured by Design approved
• BBA certification
• Compliant with BS 6375-2 and EN13126-5
* Standard ferritic (was 430) to BS EN 10088-2 Grade 1.4016 or Austenitic (was 304) stainless steel to BS EN 10088-2 Grade 1.4301 for enhanced corrosion resistance. ** 10 Year Mechanical Guarantee for Standard Ferritic and 12 Year Mechanical Guarantee for Austenitic Stainless Steel.
An ASSA ABLOY Group brand
Defender Restricted
Part Code Hinge Size(mm)
Stack Height (mm)
Max VentWeight
(kg)
Min Vent Height (mm)
Max Vent Height (mm)
Max Opening Angle
‘A’ (+/- 2.5°)
Restricted Opening Angle
‘B’ (+/- 2.5°)
EDTR12 310 13 20 350 550 65° 14°EDTR16 413 13 21 500 780 59° 10°EDTR20 513 13 26 700 1100 50° 7°EDTR24 613 13 40 850 1300 37.5° 6°
Top Hung
Part Code Hinge Size(mm)
Stack Height (mm)
Max VentWeight
(kg)
Min Vent Width (mm)
Max Vent Width (mm)
Max Opening Angle
‘A’ (+/- 2.5°)
Restricted Opening Angle
‘B’ (+/- 2.5°)
EDSR12/-PR 310 13 22 300 600 58° 13°EDSR16/-PR 413 13 24 400 700 58° 11°
Side Hung
• Side hung restricted hinges are sold with an opposite hand standard non-restricted hinge; as only one side hung restricted hingeisrequiredandmustbefittedasabottomhinge-PL=LeftHandhingeisrestricted,-PR=RightHandhingeisrestricted•Tophungrestrictedhingesaresoldandmustbefittedinpairs Note: As with all types of friction hinges, friction cannot be provided until the slider moves, therefore when opening top hung vents to angles of 10° or less a separate device may be required to prevent the window from closing. Note: Restrictedgapiscontrolledby:
An ASSA ABLOY Group brand
‘A’ max Opening Angle
‘B’ Restricted Opening Angle
Rev 6 - Jan 2014 - ©
Ref: D
SS
D
Slot hole slot format will provide the ability to adjust the vent more easily
Defender Highline variants for deeper profiles with cavities between 16mm and 18mm
Defender Slimline; engineered for narrower hardware channels
Drilling jigs for all sizes are available to order
To meet the ever increasing demand for larger windows the EDTH24 is available for large heavy top hung vents
Note: As with all types of friction hinges, friction cannot be provided until the slider
moves, therefore when limiting the opening of top hung vents to angles of 10º or less a separate device may be required to prevent the window from closing.
When fitting the EDTH24 and its variants pull in blocks/ locking wedges/ snubbers must be fitted 100mm from each corner and then across the top as required to aid weather sealing.
For part codes and further information please visit
www.securistyle.co.uk
PRODUCT SPECIFICATIONS
DIMENSION ‘L’ WHEN
HINGE IS FULLY OPEN
STACK HEIGHT* 13mm Nominal
* OTHER STACK HEIGHTS AVAILABLE
Due to our policy of continual improvement we reserve the right
to alter specifications without notice. It is the responsibility of
the window manufacturer to ensure that the finished window meets the required performance and safety specification.
All transactions are subject to our standard conditions of supply,
which are available on request
Hinge Size
(Top Hung)
(in/mm)
Max Vent
Weight
(kg/lb)
Min Vent
Height
(mm/in)
Max Vent
Height
(mm/in)
Hinge
Dimension ‘L’
(mm/in)
Opening Angle
(+/- 2.5°)
6/159 10/22 150/6 300/12 63/2.48 50°
8/209 12/26 200/8 350/14 119/4.69 65°
10/259 16/35 275/11 400/16 131/5.15 80°
12/310 20/44 350/14 550/22 164/6.45 80°
16/412 21/46 500/20 780/31 239/9.4/ 80°
20/513 26/57 700/28 1100/43 215/8.46 50°
24/615 40/88 850/33 1300/51 156/6.14 37.5°
H24/615 50/110 850/33 1500/59 156/6.14 27°
Hinge Size
(Side Hung)
Min Vent
Width
Max Vent
Width
8/209 18/39 200/8 400/15.7 183/7.20 65°
12/310 22/48 300/12 600/23.6 172/6.77 60°
16/412 24/53 400/16 700/27.6 170/6.69 60°
BS EN ISO9001
Cert No. Q05105
Packaging
25 pairs per box supplied as pairs
EDSR PL/PR 25 pairs per box (Pair: 1 restricted/1 non-restricted)EDSR L/R 50 hinges per box supplied as singles
Material Specification
Links: Ferritic or Austenitic Stainless SteelTrack: Ferritic or Austenitic Stainless SteelPivot Rivets: Austenitic Stainless SteelEnd Cap Moulding: Grey NylonRestricted Lever: Zinc Alloy plated with Bright Copper Nickel Finish
Smooth Operation• Thermoplastic components
for long life
Quick Release• Fully opening release lever
relocates and resets automatically
* Add H6 for 16” * Add H7 for 17”* For austenitic variants add ‘A’ to end of part code* For timber variants add ‘-TV’ to end of part code (13mm stack height only)
* The restricted opening angle of the hinge (Angle ‘B’)*Systemprofiledepth* Vent size