maintenance and fluids
DESCRIPTION
CON-E-CO maintenance and fluids mixer seminar.TRANSCRIPT
![Page 1: Maintenance and Fluids](https://reader036.vdocuments.us/reader036/viewer/2022062514/558405c0d8b42a79268b4ce5/html5/thumbnails/1.jpg)
Maintenance & Fluids
Mixer SeminarPresented By: Rich Gochenour
![Page 2: Maintenance and Fluids](https://reader036.vdocuments.us/reader036/viewer/2022062514/558405c0d8b42a79268b4ce5/html5/thumbnails/2.jpg)
Section 2 (Maintenance) Page 3
Continuous Monitoring
Check from wet appearance on gears, tire and support roller
Monitor unusual or irregular sound while mixer is operating
![Page 3: Maintenance and Fluids](https://reader036.vdocuments.us/reader036/viewer/2022062514/558405c0d8b42a79268b4ce5/html5/thumbnails/3.jpg)
Section 2 Page 3
Daily Maintenance
Check oil distribution on ring gear, tire and support roller
Check auto oilier and fill• 80w90 Gear Lube or 85w140 Gear Lube
Check hydraulic fluid level in sight glass of reservoir
![Page 4: Maintenance and Fluids](https://reader036.vdocuments.us/reader036/viewer/2022062514/558405c0d8b42a79268b4ce5/html5/thumbnails/4.jpg)
Section 2 Page 3
Weekly Maintenance
Grease Support Roller Bearings (4 zerks)Grease Tilt Cylinder Pins (4 zerks)Grease Tilt Pins (4 zerks)Grease Mixer Drive Reducers (2 zerks)
Bearings and Pins-high quality extreme pressure bearing grease
![Page 5: Maintenance and Fluids](https://reader036.vdocuments.us/reader036/viewer/2022062514/558405c0d8b42a79268b4ce5/html5/thumbnails/5.jpg)
Section 2 Page 5
Grease Locations
![Page 6: Maintenance and Fluids](https://reader036.vdocuments.us/reader036/viewer/2022062514/558405c0d8b42a79268b4ce5/html5/thumbnails/6.jpg)
Section 2 Page 3
Monthly Maintenance
File the “Monthly Inspection”Check Oil Level in the Gear ReducerReplace Hydraulic Filters
• Replace quarterly or as needed• 10 micron absolute
![Page 7: Maintenance and Fluids](https://reader036.vdocuments.us/reader036/viewer/2022062514/558405c0d8b42a79268b4ce5/html5/thumbnails/7.jpg)
Section 2 Page 7
![Page 8: Maintenance and Fluids](https://reader036.vdocuments.us/reader036/viewer/2022062514/558405c0d8b42a79268b4ce5/html5/thumbnails/8.jpg)
Section 2 Page 4
![Page 9: Maintenance and Fluids](https://reader036.vdocuments.us/reader036/viewer/2022062514/558405c0d8b42a79268b4ce5/html5/thumbnails/9.jpg)
Section 2 Page 3
Annual Maintenance
Drain and Replace Gear Reducer Oil• Oil-API-GL-5, No.80 or 90-capacity 80 oz.
Drain and Replace Hydraulic Fluid. Replace the hydraulic filters and clean tank.• 120-140 Gallon• See list of recommended fluids.