mainspro | comap mainspro | solar protection relay - bcj controls
TRANSCRIPT
COMAP MAINSPRO
SOLAR PROTECTION RELAY
MAINSPRO
BCJ Controls
At BCJ Controls we produce Secondary Protection Switchboards with solar protection
relays for Commercial Solar over 30kW grid connections.
BCJ Controls - commercial solar network protection unit - switchboard manufacturing
including protection relay & anti-islanding and zero export devices.
BCJ Controls is a solar technology company set up by ex-utility industrial sparkies.
Between them they have a large amount of experience in electrical grid protection,
as well as dealing with utilities on a day-to-day basis.
2,17 Lorraine St, Peakhurst, NSW Australia 2210
www.bcjcontrols.com.au
ComAp MainsPro Solar Protection Relay
The ComAp MainsPro solar protection relay is used for grid-tie applications, and
provides anti-islanding protection as required by Distribution Network Service
Providers for solar over 30 kW. It can be used with any embedded generator systems
such as gen sets, co-generation, or renewable energy sources including photovoltaic
plants or wind turbines. The ComAp MainsPro grants adjustable voltage, frequency,
and loss of mains functions to safeguard the distribution network and the
generators.
With ComAp MainsPro, no special knowledge is needed for the installation process
and no additional units are required. This makes it an optimal solution for both
untrained personnel and professionals. The unit is designed to comply
completely with Utilities’ connection requirements and statutory codes, offering a
high level of protection and safety when working in parallel to the mains.
This item can be used within our secondary protection units which come as a
switchboard ready to connect inverter cabling to. Have a look here for more info.
The ComAp MainsPro complies with IEC 60255, G83, G59/3, UL508, CEI 0-21, IEn NR
005/2012, VDE V 0126-1-1 and VDE-AR-N 4105
ComAp MainsPro Product Features:
Flexible supply voltage and measurement range.
Suited for standard DIN rail installation or door-mount.
User friendly interface with easy setting (no software tools needed).
Simple wiring with removable connectors.
Remote binary communication.
Compact design for installation in restricted spaces.
Loss of Mains function and history track function (Last 5 events history log).
Integrated mechanical lock to secure your settings.
Breaker failure protection.
Watchdog relay output.
Increased resolution of frequency protection settings.
Resistance to frequency jumping.
ComAp MainsPro Technical Information:
True RMS measurements for more accurate, reliable evaluation of failures.
Vector Shift and Rate of change of frequency protections are available in a
single unit to allow for the best fit for each site.
Symmetrical components allow for better detection of voltage
asymmetry failures.
Two stage settings of voltage and frequency safeguards cover short and long
term disturbances with fitting priority.
Free assignment of five relay outputs allows for a large range of signaling
and trip methods.
Four binary switches to remotely alter unit operation.
Adjustable time delay of Automatic fault reset to avoid need for personnel
on-site.
Universal power supply of 8 – 40 VDC, 85 – 265 VAC, and 110 – 370 VDC.
Unit is independent on application due to the optional voltage range of
120/230/400 VAC with over-range to 156/290/520 VAC.
Supports three-phase and one-phase applications.
Last trip is recorded to provide evidence of trip cause.
For more details click here.