main hardware. main pc to board connection via px200 main hardware
TRANSCRIPT
Main Hardware
Main Hardware
Main PC to Board Connection via PX200
Main Hardware
How to develop PIC microcontroller programming with PIC Station-3
(1) Install all development software tools.• MPLAB V8 or higher• HI-TECH C compiler Lite mode
(2) Use the PIC Station-3 board with • Microchip’s ICD2• INEX’s PX-200/PX-700 USB programmer.
(3) Construct the experiment circuit on breadboard of PIC Station-3 board.
(4) Create the C project file and source file in MPLAB. Compile the experiment project to get the HEX file for downloading to PIC devices.
Software Required
Software Required
Installing MPLAB IDE
1) Unzip “MPLAB_IDE_8_36.zip” from the tools direction in the CDROM2) Run “setup.exe”
Software Required
Software Required
Software Required
Software Required
HOW TO PROGRAM
HOW TO PROGRAM
HOW TO PROGRAM
HOW TO PROGRAM
HOW TO PROGRAM
HOW TO PROGRAM
HOW TO PROGRAM
HOW TO PROGRAM
HOW TO PROGRAM
WRITING THE CODE
WRITING THE CODE
COMPILING
UPLOADING
UPLOADING
TESTING
TESTING