magnitude, intensity, & energy muse 11b. who’s that? how did this get here?
Post on 19-Dec-2015
215 views
TRANSCRIPT
Magnitude, Intensity, & Energy
MUSE 11B
Who’s That? How did this get here?
Modified Mercalli Intensity
Intensity = effect of an EQ on the Earth's surface Numerous intensity scales have been developed over the last
several hundred years, but the one currently used in U.S. is the Modified Mercalli (MM) Intensity Scale. Developed in 1931 by the American seismologists Harry Wood and
Frank Neumann, based on scale developed in 1902 by Italian seismologist Giuseppe Mercalli.
Scale is composed of 12 increasing levels of intensity that range from imperceptible shaking to catastrophic destruction.
Roman numerals. It does not have a mathematical basis; instead it is an arbitrary
ranking based on observed effects. MMI assigned to a specific site after an EQ has a more
meaningful measure of severity to the nonscientist than the magnitude because intensity refers to the effects actually experienced at that place.
Modified Mercalli Intensity I. Not felt except by a very few under especially favorable conditions. II. Felt only by a few persons at rest, especially on upper floors of buildings. III. Felt quite noticeably by persons indoors, especially on upper floors of buildings. Many people do
not recognize it as an earthquake. Standing motor cars may rock slightly. Vibrations similar to the passing of a truck. Duration estimated.
IV. Felt indoors by many, outdoors by few during the day. At night, some awakened. Dishes, windows, doors disturbed; walls make cracking sound. Sensation like heavy truck striking building. Standing motor cars rocked noticeably.
V. Felt by nearly everyone; many awakened. Some dishes, windows broken. Unstable objects overturned. Pendulum clocks may stop.
VI. Felt by all, many frightened. Some heavy furniture moved; a few instances of fallen plaster. Damage slight.
VII. Damage negligible in buildings of good design and construction; slight to moderate in well-built ordinary structures; considerable damage in poorly built or badly designed structures; some chimneys broken.
VIII. Damage slight in specially designed structures; considerable damage in ordinary substantial buildings with partial collapse. Damage great in poorly built structures. Fall of chimneys, factory stacks, columns, monuments, walls. Heavy furniture overturned.
IX. Damage considerable in specially designed structures; well-designed frame structures thrown out of plumb. Damage great in substantial buildings, with partial collapse. Buildings shifted off foundations.
X. Some well-built wooden structures destroyed; most masonry and frame structures destroyed with foundations. Rails bent.
XI. Few, if any (masonry) structures remain standing. Bridges destroyed. Rails bent greatly. XII. Damage total. Lines of sight and level are distorted. Objects thrown into the air.
MMI Activity
Using the handout, develop an isoseismal map
Isoseismal Map
Frequency of Occurrence of EQDescriptor Richter
Magnitudes Earthquake Effects Frequency of
Occurrence
Micro Less than 2.0 Microearthquakes, not felt. About 8,000 per day
Very minor 2.0-2.9 Generally not felt, but recorded. About 1,000 per day
Minor 3.0-3.9 Often felt, but rarely causes damage. 49,000 per year (est.)
Light 4.0-4.9 Noticeable shaking of indoor items, rattling noises. Significant damage unlikely.
6,200 per year (est.)
Moderate 5.0-5.9 Can cause major damage to poorly constructed buildings over small regions. At most slight damage to well-designed buildings.
800 per year
Strong 6.0-6.9 Can be destructive in areas up to about 100 miles across in populated areas.
120 per year
Major 7.0-7.9 Can cause serious damage over larger areas. 18 per year
Great 8.0-8.9 Can cause serious damage in areas several hundred miles across.
1 per year
Rare great 9.0 or greater Devastating in areas several thousand miles across.
1 per 20 years
RichterMagnitude
Approximate TNT for Seismic Energy Yield Example
0.5 5.6 kg (12.4 lb) Hand grenade
1.0 32 kg (70 lb) Construction site blast
1.5 178 kg (392 lb) WWII conventional bombs
2.0 1 metric ton late WWII conventional bombs
2.5 5.6 metric tons WWII blockbuster bomb
3.0 32 metric tons Massive Ordnance Air Blast bomb
3.5 178 metric tons Chernobyl nuclear disaster, 1986
4.0 1 kiloton Small atomic bomb
4.5 5.6 kilotons Average tornado (total energy)
5.0 32 kiloton Nagasaki atomic bomb
5.5 178 kilotons Little Skull Mtn., NV Quake, 1992
6.0 1 megaton Double Spring Flat, NV Quake, 1994
6.5 5.6 megatons Northridge quake, 1994
7.0 32 megatons Largest thermonuclear weapon
7.5 178 megatons Landers, CA Quake, 1992
8.0 1 gigaton San Francisco, CA Quake, 1906
8.5 5.6 gigatons Anchorage, AK Quake, 1964
9.0 32 gigatons 2004 Indian Ocean earthquake
10.0 1 teraton estimate for a 100 km rocky bolide impacting at 25 km/s
How Richter magnitude (ML) was measured
ML = log10 of the maximum ground motion (in millimeters) recorded on a Wood-Anderson short-period seismometer 100 km from the earthquake
Source Study of the 1906 San Francisco Earthquake by David J. Wald David J. Wald, Hiroo Kanamori and Donald V. Helmberger Bull. Seism. Soc. Am., 83, 981-1019, 1993
Other magnitude scales
Magnitude Symbol Wave
Local (Richter) ML S or Surface Wave*
Body-Wave mb P
Surface-Wave Ms Rayleigh
Moment Mw Rupture Area, Slip
Moment Magnitude - Mw
Mw = (2/3)log10Mo – 10.7
Mo = Seismic Moment
Mo = μAuo μ = shear modulus (typically 30 x 109 N/m2
or 30 x 1010 dyne/cm2)o A = area of fault ruptureo u =average displacement along fault
Radiated Seismic Energy = Es
Conservation of EnergyTotal energy before = Total energy after
P.E. = Es + crushing of rocks + heat
P.E. built up from strain in rocks as two sides of faults move past each other
Es = radiated seismic energy
Radiated Seismic Energy = Es
Es = Mo (1.6 x 10-5)where Es is measured in ergsand Mo in dyne-cm
Es = Mo (1.6 x 10-5)
Mw Es (ergs) Note Compared to Mw=5
5 2.00E+19 1 6 6.31E+20 32 7 2.00E+22 1000
8 6.31E+23
one day supply of energy for
U.S. 31623
Note:
1 kilowatt hour = 3.6 x 1013 ergs
typical house 15 KW hours
From Kramer, S.L. (1996). Geotechnical Earthquake Engineering, Prentice Hall, Inc., Upper Saddle River, New Jersey
From http://www.gly.fsu.edu/%7Esalters/GLY1000/Chapter4/